1 /*- 2 * SPDX-License-Identifier: BSD-3-Clause 3 * 4 * Copyright (c) 1989, 1990 William F. Jolitz 5 * Copyright (c) 1990 The Regents of the University of California. 6 * All rights reserved. 7 * 8 * This code is derived from software contributed to Berkeley by 9 * William Jolitz. 10 * 11 * Redistribution and use in source and binary forms, with or without 12 * modification, are permitted provided that the following conditions 13 * are met: 14 * 1. Redistributions of source code must retain the above copyright 15 * notice, this list of conditions and the following disclaimer. 16 * 2. Redistributions in binary form must reproduce the above copyright 17 * notice, this list of conditions and the following disclaimer in the 18 * documentation and/or other materials provided with the distribution. 19 * 3. Neither the name of the University nor the names of its contributors 20 * may be used to endorse or promote products derived from this software 21 * without specific prior written permission. 22 * 23 * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND 24 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE 25 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE 26 * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE 27 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL 28 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS 29 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) 30 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT 31 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY 32 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF 33 * SUCH DAMAGE. 34 * 35 * from: @(#)segments.h 7.1 (Berkeley) 5/9/91 36 */ 37 38 #ifndef _X86_SEGMENTS_H_ 39 #define _X86_SEGMENTS_H_ 40 41 /* 42 * X86 Segmentation Data Structures and definitions 43 */ 44 45 /* 46 * Selectors 47 */ 48 #define SEL_RPL_MASK 3 /* requester priv level */ 49 #define ISPL(s) ((s)&3) /* priority level of a selector */ 50 #define SEL_KPL 0 /* kernel priority level */ 51 #define SEL_UPL 3 /* user priority level */ 52 #define ISLDT(s) ((s)&SEL_LDT) /* is it local or global */ 53 #define SEL_LDT 4 /* local descriptor table */ 54 #define IDXSEL(s) (((s)>>3) & 0x1fff) /* index of selector */ 55 #define LSEL(s,r) (((s)<<3) | SEL_LDT | r) /* a local selector */ 56 #define GSEL(s,r) (((s)<<3) | r) /* a global selector */ 57 58 /* 59 * User segment descriptors (%cs, %ds etc for i386 apps. 64 bit wide) 60 * For long-mode apps, %cs only has the conforming bit in sd_type, the sd_dpl, 61 * sd_p, sd_l and sd_def32 which must be zero). %ds only has sd_p. 62 */ 63 struct segment_descriptor { 64 unsigned sd_lolimit:16; /* segment extent (lsb) */ 65 unsigned sd_lobase:24; /* segment base address (lsb) */ 66 unsigned sd_type:5; /* segment type */ 67 unsigned sd_dpl:2; /* segment descriptor priority level */ 68 unsigned sd_p:1; /* segment descriptor present */ 69 unsigned sd_hilimit:4; /* segment extent (msb) */ 70 unsigned sd_xx:2; /* unused */ 71 unsigned sd_def32:1; /* default 32 vs 16 bit size */ 72 unsigned sd_gran:1; /* limit granularity (byte/page units)*/ 73 unsigned sd_hibase:8; /* segment base address (msb) */ 74 } __packed; 75 76 struct user_segment_descriptor { 77 unsigned sd_lolimit:16; /* segment extent (lsb) */ 78 unsigned sd_lobase:24; /* segment base address (lsb) */ 79 unsigned sd_type:5; /* segment type */ 80 unsigned sd_dpl:2; /* segment descriptor priority level */ 81 unsigned sd_p:1; /* segment descriptor present */ 82 unsigned sd_hilimit:4; /* segment extent (msb) */ 83 unsigned sd_xx:1; /* unused */ 84 unsigned sd_long:1; /* long mode (cs only) */ 85 unsigned sd_def32:1; /* default 32 vs 16 bit size */ 86 unsigned sd_gran:1; /* limit granularity (byte/page units)*/ 87 unsigned sd_hibase:8; /* segment base address (msb) */ 88 } __packed; 89 90 #define USD_GETBASE(sd) (((sd)->sd_lobase) | (sd)->sd_hibase << 24) 91 #define USD_SETBASE(sd, b) (sd)->sd_lobase = (b); \ 92 (sd)->sd_hibase = ((b) >> 24); 93 #define USD_GETLIMIT(sd) (((sd)->sd_lolimit) | (sd)->sd_hilimit << 16) 94 #define USD_SETLIMIT(sd, l) (sd)->sd_lolimit = (l); \ 95 (sd)->sd_hilimit = ((l) >> 16); 96 97 #ifdef __i386__ 98 /* 99 * Gate descriptors (e.g. indirect descriptors) 100 */ 101 struct gate_descriptor { 102 unsigned gd_looffset:16; /* gate offset (lsb) */ 103 unsigned gd_selector:16; /* gate segment selector */ 104 unsigned gd_stkcpy:5; /* number of stack wds to cpy */ 105 unsigned gd_xx:3; /* unused */ 106 unsigned gd_type:5; /* segment type */ 107 unsigned gd_dpl:2; /* segment descriptor priority level */ 108 unsigned gd_p:1; /* segment descriptor present */ 109 unsigned gd_hioffset:16; /* gate offset (msb) */ 110 } __packed; 111 112 /* 113 * Generic descriptor 114 */ 115 union descriptor { 116 struct segment_descriptor sd; 117 struct gate_descriptor gd; 118 }; 119 #else 120 /* 121 * Gate descriptors (e.g. indirect descriptors, trap, interrupt etc. 128 bit) 122 * Only interrupt and trap gates have gd_ist. 123 */ 124 struct gate_descriptor { 125 uint64_t gd_looffset:16; /* gate offset (lsb) */ 126 uint64_t gd_selector:16; /* gate segment selector */ 127 uint64_t gd_ist:3; /* IST table index */ 128 uint64_t gd_xx:5; /* unused */ 129 uint64_t gd_type:5; /* segment type */ 130 uint64_t gd_dpl:2; /* segment descriptor priority level */ 131 uint64_t gd_p:1; /* segment descriptor present */ 132 uint64_t gd_hioffset:48; /* gate offset (msb) */ 133 uint64_t sd_xx1:32; 134 } __packed; 135 136 /* 137 * Generic descriptor 138 */ 139 union descriptor { 140 struct user_segment_descriptor sd; 141 struct gate_descriptor gd; 142 }; 143 #endif 144 145 /* system segments and gate types */ 146 #define SDT_SYSNULL 0 /* system null */ 147 #define SDT_SYS286TSS 1 /* system 286 TSS available */ 148 #define SDT_SYSLDT 2 /* system local descriptor table */ 149 #define SDT_SYS286BSY 3 /* system 286 TSS busy */ 150 #define SDT_SYS286CGT 4 /* system 286 call gate */ 151 #define SDT_SYSTASKGT 5 /* system task gate */ 152 #define SDT_SYS286IGT 6 /* system 286 interrupt gate */ 153 #define SDT_SYS286TGT 7 /* system 286 trap gate */ 154 #define SDT_SYSNULL2 8 /* system null again */ 155 #define SDT_SYS386TSS 9 /* system 386 TSS available */ 156 #define SDT_SYSTSS 9 /* system available 64 bit TSS */ 157 #define SDT_SYSNULL3 10 /* system null again */ 158 #define SDT_SYS386BSY 11 /* system 386 TSS busy */ 159 #define SDT_SYSBSY 11 /* system busy 64 bit TSS */ 160 #define SDT_SYS386CGT 12 /* system 386 call gate */ 161 #define SDT_SYSCGT 12 /* system 64 bit call gate */ 162 #define SDT_SYSNULL4 13 /* system null again */ 163 #define SDT_SYS386IGT 14 /* system 386 interrupt gate */ 164 #define SDT_SYSIGT 14 /* system 64 bit interrupt gate */ 165 #define SDT_SYS386TGT 15 /* system 386 trap gate */ 166 #define SDT_SYSTGT 15 /* system 64 bit trap gate */ 167 168 /* memory segment types */ 169 #define SDT_MEMRO 16 /* memory read only */ 170 #define SDT_MEMROA 17 /* memory read only accessed */ 171 #define SDT_MEMRW 18 /* memory read write */ 172 #define SDT_MEMRWA 19 /* memory read write accessed */ 173 #define SDT_MEMROD 20 /* memory read only expand dwn limit */ 174 #define SDT_MEMRODA 21 /* memory read only expand dwn limit accessed */ 175 #define SDT_MEMRWD 22 /* memory read write expand dwn limit */ 176 #define SDT_MEMRWDA 23 /* memory read write expand dwn limit accessed*/ 177 #define SDT_MEME 24 /* memory execute only */ 178 #define SDT_MEMEA 25 /* memory execute only accessed */ 179 #define SDT_MEMER 26 /* memory execute read */ 180 #define SDT_MEMERA 27 /* memory execute read accessed */ 181 #define SDT_MEMEC 28 /* memory execute only conforming */ 182 #define SDT_MEMEAC 29 /* memory execute only accessed conforming */ 183 #define SDT_MEMERC 30 /* memory execute read conforming */ 184 #define SDT_MEMERAC 31 /* memory execute read accessed conforming */ 185 186 /* 187 * Size of IDT table 188 */ 189 #define NIDT 256 /* 32 reserved, 0x80 syscall, most are h/w */ 190 #define NRSVIDT 32 /* reserved entries for cpu exceptions */ 191 192 /* 193 * Entries in the Interrupt Descriptor Table (IDT) 194 */ 195 #define IDT_DE 0 /* #DE: Divide Error */ 196 #define IDT_DB 1 /* #DB: Debug */ 197 #define IDT_NMI 2 /* Nonmaskable External Interrupt */ 198 #define IDT_BP 3 /* #BP: Breakpoint */ 199 #define IDT_OF 4 /* #OF: Overflow */ 200 #define IDT_BR 5 /* #BR: Bound Range Exceeded */ 201 #define IDT_UD 6 /* #UD: Undefined/Invalid Opcode */ 202 #define IDT_NM 7 /* #NM: No Math Coprocessor */ 203 #define IDT_DF 8 /* #DF: Double Fault */ 204 #define IDT_FPUGP 9 /* Coprocessor Segment Overrun */ 205 #define IDT_TS 10 /* #TS: Invalid TSS */ 206 #define IDT_NP 11 /* #NP: Segment Not Present */ 207 #define IDT_SS 12 /* #SS: Stack Segment Fault */ 208 #define IDT_GP 13 /* #GP: General Protection Fault */ 209 #define IDT_PF 14 /* #PF: Page Fault */ 210 #define IDT_MF 16 /* #MF: FPU Floating-Point Error */ 211 #define IDT_AC 17 /* #AC: Alignment Check */ 212 #define IDT_MC 18 /* #MC: Machine Check */ 213 #define IDT_XF 19 /* #XF: SIMD Floating-Point Exception */ 214 #define IDT_IO_INTS NRSVIDT /* Base of IDT entries for I/O interrupts. */ 215 #define IDT_SYSCALL 0x80 /* System Call Interrupt Vector */ 216 #define IDT_DTRACE_RET 0x92 /* DTrace pid provider Interrupt Vector */ 217 #define IDT_EVTCHN 0x93 /* Xen HVM Event Channel Interrupt Vector */ 218 219 #if defined(__i386__) 220 /* 221 * Entries in the Global Descriptor Table (GDT) 222 * Note that each 4 entries share a single 32 byte L1 cache line. 223 * Some of the fast syscall instructions require a specific order here. 224 */ 225 #define GNULL_SEL 0 /* Null Descriptor */ 226 #define GPRIV_SEL 1 /* SMP Per-Processor Private Data */ 227 #define GUFS_SEL 2 /* User %fs Descriptor (order critical: 1) */ 228 #define GUGS_SEL 3 /* User %gs Descriptor (order critical: 2) */ 229 #define GCODE_SEL 4 /* Kernel Code Descriptor (order critical: 1) */ 230 #define GDATA_SEL 5 /* Kernel Data Descriptor (order critical: 2) */ 231 #define GUCODE_SEL 6 /* User Code Descriptor (order critical: 3) */ 232 #define GUDATA_SEL 7 /* User Data Descriptor (order critical: 4) */ 233 #define GBIOSLOWMEM_SEL 8 /* BIOS low memory access (must be entry 8) */ 234 #define GPROC0_SEL 9 /* Task state process slot zero and up */ 235 #define GLDT_SEL 10 /* Default User LDT */ 236 #define GUSERLDT_SEL 11 /* User LDT */ 237 #define GPANIC_SEL 12 /* Task state to consider panic from */ 238 #define GBIOSCODE32_SEL 13 /* BIOS interface (32bit Code) */ 239 #define GBIOSCODE16_SEL 14 /* BIOS interface (16bit Code) */ 240 #define GBIOSDATA_SEL 15 /* BIOS interface (Data) */ 241 #define GBIOSUTIL_SEL 16 /* BIOS interface (Utility) */ 242 #define GBIOSARGS_SEL 17 /* BIOS interface (Arguments) */ 243 #define GNDIS_SEL 18 /* For the NDIS layer */ 244 #define NGDT 19 245 246 /* 247 * Entries in the Local Descriptor Table (LDT) 248 */ 249 #define LSYS5CALLS_SEL 0 /* forced by intel BCS */ 250 #define LSYS5SIGR_SEL 1 251 #define LUCODE_SEL 3 252 #define LUDATA_SEL 5 253 #define NLDT (LUDATA_SEL + 1) 254 255 #else /* !__i386__ */ 256 /* 257 * Entries in the Global Descriptor Table (GDT) 258 */ 259 #define GNULL_SEL 0 /* Null Descriptor */ 260 #define GNULL2_SEL 1 /* Null Descriptor */ 261 #define GUFS32_SEL 2 /* User 32 bit %fs Descriptor */ 262 #define GUGS32_SEL 3 /* User 32 bit %gs Descriptor */ 263 #define GCODE_SEL 4 /* Kernel Code Descriptor */ 264 #define GDATA_SEL 5 /* Kernel Data Descriptor */ 265 #define GUCODE32_SEL 6 /* User 32 bit code Descriptor */ 266 #define GUDATA_SEL 7 /* User 32/64 bit Data Descriptor */ 267 #define GUCODE_SEL 8 /* User 64 bit Code Descriptor */ 268 #define GPROC0_SEL 9 /* TSS for entering kernel etc */ 269 /* slot 10 is second half of GPROC0_SEL */ 270 #define GUSERLDT_SEL 11 /* LDT */ 271 /* slot 12 is second half of GUSERLDT_SEL */ 272 #define NGDT 13 273 #endif /* __i386__ */ 274 275 #endif /* !_X86_SEGMENTS_H_ */ 276