xref: /freebsd/sys/x86/acpica/srat.c (revision bc96366c864c07ef352edb92017357917c75b36c)
1 /*-
2  * Copyright (c) 2010 Advanced Computing Technologies LLC
3  * Written by: John H. Baldwin <jhb@FreeBSD.org>
4  * All rights reserved.
5  *
6  * Redistribution and use in source and binary forms, with or without
7  * modification, are permitted provided that the following conditions
8  * are met:
9  * 1. Redistributions of source code must retain the above copyright
10  *    notice, this list of conditions and the following disclaimer.
11  * 2. Redistributions in binary form must reproduce the above copyright
12  *    notice, this list of conditions and the following disclaimer in the
13  *    documentation and/or other materials provided with the distribution.
14  *
15  * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
16  * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
17  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
18  * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
19  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
20  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
21  * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
22  * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
23  * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
24  * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
25  * SUCH DAMAGE.
26  */
27 
28 #include <sys/cdefs.h>
29 __FBSDID("$FreeBSD$");
30 
31 #include <sys/param.h>
32 #include <sys/bus.h>
33 #include <sys/kernel.h>
34 #include <sys/lock.h>
35 #include <sys/mutex.h>
36 #include <sys/smp.h>
37 #include <sys/vmmeter.h>
38 #include <vm/vm.h>
39 #include <vm/pmap.h>
40 #include <vm/vm_param.h>
41 #include <vm/vm_page.h>
42 #include <vm/vm_phys.h>
43 
44 #include <contrib/dev/acpica/include/acpi.h>
45 #include <contrib/dev/acpica/include/actables.h>
46 
47 #include <machine/intr_machdep.h>
48 #include <x86/apicvar.h>
49 
50 #include <dev/acpica/acpivar.h>
51 
52 #if MAXMEMDOM > 1
53 struct cpu_info {
54 	int enabled:1;
55 	int has_memory:1;
56 	int domain;
57 } cpus[MAX_APIC_ID + 1];
58 
59 struct mem_affinity mem_info[VM_PHYSSEG_MAX + 1];
60 int num_mem;
61 
62 static ACPI_TABLE_SRAT *srat;
63 static vm_paddr_t srat_physaddr;
64 
65 static int vm_domains[VM_PHYSSEG_MAX];
66 
67 static void	srat_walk_table(acpi_subtable_handler *handler, void *arg);
68 
69 /*
70  * Returns true if a memory range overlaps with at least one range in
71  * phys_avail[].
72  */
73 static int
74 overlaps_phys_avail(vm_paddr_t start, vm_paddr_t end)
75 {
76 	int i;
77 
78 	for (i = 0; phys_avail[i] != 0 && phys_avail[i + 1] != 0; i += 2) {
79 		if (phys_avail[i + 1] < start)
80 			continue;
81 		if (phys_avail[i] < end)
82 			return (1);
83 		break;
84 	}
85 	return (0);
86 
87 }
88 
89 static void
90 srat_parse_entry(ACPI_SUBTABLE_HEADER *entry, void *arg)
91 {
92 	ACPI_SRAT_CPU_AFFINITY *cpu;
93 	ACPI_SRAT_X2APIC_CPU_AFFINITY *x2apic;
94 	ACPI_SRAT_MEM_AFFINITY *mem;
95 	int domain, i, slot;
96 
97 	switch (entry->Type) {
98 	case ACPI_SRAT_TYPE_CPU_AFFINITY:
99 		cpu = (ACPI_SRAT_CPU_AFFINITY *)entry;
100 		domain = cpu->ProximityDomainLo |
101 		    cpu->ProximityDomainHi[0] << 8 |
102 		    cpu->ProximityDomainHi[1] << 16 |
103 		    cpu->ProximityDomainHi[2] << 24;
104 		if (bootverbose)
105 			printf("SRAT: Found CPU APIC ID %u domain %d: %s\n",
106 			    cpu->ApicId, domain,
107 			    (cpu->Flags & ACPI_SRAT_CPU_ENABLED) ?
108 			    "enabled" : "disabled");
109 		if (!(cpu->Flags & ACPI_SRAT_CPU_ENABLED))
110 			break;
111 		KASSERT(!cpus[cpu->ApicId].enabled,
112 		    ("Duplicate local APIC ID %u", cpu->ApicId));
113 		cpus[cpu->ApicId].domain = domain;
114 		cpus[cpu->ApicId].enabled = 1;
115 		break;
116 	case ACPI_SRAT_TYPE_X2APIC_CPU_AFFINITY:
117 		x2apic = (ACPI_SRAT_X2APIC_CPU_AFFINITY *)entry;
118 		if (bootverbose)
119 			printf("SRAT: Found CPU APIC ID %u domain %d: %s\n",
120 			    x2apic->ApicId, x2apic->ProximityDomain,
121 			    (x2apic->Flags & ACPI_SRAT_CPU_ENABLED) ?
122 			    "enabled" : "disabled");
123 		if (!(x2apic->Flags & ACPI_SRAT_CPU_ENABLED))
124 			break;
125 		KASSERT(!cpus[x2apic->ApicId].enabled,
126 		    ("Duplicate local APIC ID %u", x2apic->ApicId));
127 		cpus[x2apic->ApicId].domain = x2apic->ProximityDomain;
128 		cpus[x2apic->ApicId].enabled = 1;
129 		break;
130 	case ACPI_SRAT_TYPE_MEMORY_AFFINITY:
131 		mem = (ACPI_SRAT_MEM_AFFINITY *)entry;
132 		if (bootverbose)
133 			printf(
134 		    "SRAT: Found memory domain %d addr %jx len %jx: %s\n",
135 			    mem->ProximityDomain, (uintmax_t)mem->BaseAddress,
136 			    (uintmax_t)mem->Length,
137 			    (mem->Flags & ACPI_SRAT_MEM_ENABLED) ?
138 			    "enabled" : "disabled");
139 		if (!(mem->Flags & ACPI_SRAT_MEM_ENABLED))
140 			break;
141 		if (!overlaps_phys_avail(mem->BaseAddress,
142 		    mem->BaseAddress + mem->Length)) {
143 			printf("SRAT: Ignoring memory at addr %jx\n",
144 			    (uintmax_t)mem->BaseAddress);
145 			break;
146 		}
147 		if (num_mem == VM_PHYSSEG_MAX) {
148 			printf("SRAT: Too many memory regions\n");
149 			*(int *)arg = ENXIO;
150 			break;
151 		}
152 		slot = num_mem;
153 		for (i = 0; i < num_mem; i++) {
154 			if (mem_info[i].end <= mem->BaseAddress)
155 				continue;
156 			if (mem_info[i].start <
157 			    (mem->BaseAddress + mem->Length)) {
158 				printf("SRAT: Overlapping memory entries\n");
159 				*(int *)arg = ENXIO;
160 				return;
161 			}
162 			slot = i;
163 		}
164 		for (i = num_mem; i > slot; i--)
165 			mem_info[i] = mem_info[i - 1];
166 		mem_info[slot].start = mem->BaseAddress;
167 		mem_info[slot].end = mem->BaseAddress + mem->Length;
168 		mem_info[slot].domain = mem->ProximityDomain;
169 		num_mem++;
170 		break;
171 	}
172 }
173 
174 /*
175  * Ensure each memory domain has at least one CPU and that each CPU
176  * has at least one memory domain.
177  */
178 static int
179 check_domains(void)
180 {
181 	int found, i, j;
182 
183 	for (i = 0; i < num_mem; i++) {
184 		found = 0;
185 		for (j = 0; j <= MAX_APIC_ID; j++)
186 			if (cpus[j].enabled &&
187 			    cpus[j].domain == mem_info[i].domain) {
188 				cpus[j].has_memory = 1;
189 				found++;
190 			}
191 		if (!found) {
192 			printf("SRAT: No CPU found for memory domain %d\n",
193 			    mem_info[i].domain);
194 			return (ENXIO);
195 		}
196 	}
197 	for (i = 0; i <= MAX_APIC_ID; i++)
198 		if (cpus[i].enabled && !cpus[i].has_memory) {
199 			printf("SRAT: No memory found for CPU %d\n", i);
200 			return (ENXIO);
201 		}
202 	return (0);
203 }
204 
205 /*
206  * Check that the SRAT memory regions cover all of the regions in
207  * phys_avail[].
208  */
209 static int
210 check_phys_avail(void)
211 {
212 	vm_paddr_t address;
213 	int i, j;
214 
215 	/* j is the current offset into phys_avail[]. */
216 	address = phys_avail[0];
217 	j = 0;
218 	for (i = 0; i < num_mem; i++) {
219 		/*
220 		 * Consume as many phys_avail[] entries as fit in this
221 		 * region.
222 		 */
223 		while (address >= mem_info[i].start &&
224 		    address <= mem_info[i].end) {
225 			/*
226 			 * If we cover the rest of this phys_avail[] entry,
227 			 * advance to the next entry.
228 			 */
229 			if (phys_avail[j + 1] <= mem_info[i].end) {
230 				j += 2;
231 				if (phys_avail[j] == 0 &&
232 				    phys_avail[j + 1] == 0) {
233 					return (0);
234 				}
235 				address = phys_avail[j];
236 			} else
237 				address = mem_info[i].end + 1;
238 		}
239 	}
240 	printf("SRAT: No memory region found for %jx - %jx\n",
241 	    (uintmax_t)phys_avail[j], (uintmax_t)phys_avail[j + 1]);
242 	return (ENXIO);
243 }
244 
245 /*
246  * Renumber the memory domains to be compact and zero-based if not
247  * already.  Returns an error if there are too many domains.
248  */
249 static int
250 renumber_domains(void)
251 {
252 	int i, j, slot;
253 
254 	/* Enumerate all the domains. */
255 	vm_ndomains = 0;
256 	for (i = 0; i < num_mem; i++) {
257 		/* See if this domain is already known. */
258 		for (j = 0; j < vm_ndomains; j++) {
259 			if (vm_domains[j] >= mem_info[i].domain)
260 				break;
261 		}
262 		if (j < vm_ndomains && vm_domains[j] == mem_info[i].domain)
263 			continue;
264 
265 		/* Insert the new domain at slot 'j'. */
266 		slot = j;
267 		for (j = vm_ndomains; j > slot; j--)
268 			vm_domains[j] = vm_domains[j - 1];
269 		vm_domains[slot] = mem_info[i].domain;
270 		vm_ndomains++;
271 		if (vm_ndomains > MAXMEMDOM) {
272 			vm_ndomains = 1;
273 			printf("SRAT: Too many memory domains\n");
274 			return (EFBIG);
275 		}
276 	}
277 
278 	/* Renumber each domain to its index in the sorted 'domains' list. */
279 	for (i = 0; i < vm_ndomains; i++) {
280 		/*
281 		 * If the domain is already the right value, no need
282 		 * to renumber.
283 		 */
284 		if (vm_domains[i] == i)
285 			continue;
286 
287 		/* Walk the cpu[] and mem_info[] arrays to renumber. */
288 		for (j = 0; j < num_mem; j++)
289 			if (mem_info[j].domain == vm_domains[i])
290 				mem_info[j].domain = i;
291 		for (j = 0; j <= MAX_APIC_ID; j++)
292 			if (cpus[j].enabled && cpus[j].domain == vm_domains[i])
293 				cpus[j].domain = i;
294 	}
295 	KASSERT(vm_ndomains > 0,
296 	    ("renumber_domains: invalid final vm_ndomains setup"));
297 
298 	return (0);
299 }
300 
301 /*
302  * Look for an ACPI System Resource Affinity Table ("SRAT")
303  */
304 static void
305 parse_srat(void *dummy)
306 {
307 	int error;
308 
309 	if (resource_disabled("srat", 0))
310 		return;
311 
312 	srat_physaddr = acpi_find_table(ACPI_SIG_SRAT);
313 	if (srat_physaddr == 0)
314 		return;
315 
316 	/*
317 	 * Make a pass over the table to populate the cpus[] and
318 	 * mem_info[] tables.
319 	 */
320 	srat = acpi_map_table(srat_physaddr, ACPI_SIG_SRAT);
321 	error = 0;
322 	srat_walk_table(srat_parse_entry, &error);
323 	acpi_unmap_table(srat);
324 	srat = NULL;
325 	if (error || check_domains() != 0 || check_phys_avail() != 0 ||
326 	    renumber_domains() != 0) {
327 		srat_physaddr = 0;
328 		return;
329 	}
330 
331 	/* Point vm_phys at our memory affinity table. */
332 	mem_affinity = mem_info;
333 }
334 SYSINIT(parse_srat, SI_SUB_VM - 1, SI_ORDER_FIRST, parse_srat, NULL);
335 
336 static void
337 srat_walk_table(acpi_subtable_handler *handler, void *arg)
338 {
339 
340 	acpi_walk_subtables(srat + 1, (char *)srat + srat->Header.Length,
341 	    handler, arg);
342 }
343 
344 /*
345  * Setup per-CPU domain IDs.
346  */
347 static void
348 srat_set_cpus(void *dummy)
349 {
350 	struct cpu_info *cpu;
351 	struct pcpu *pc;
352 	u_int i;
353 
354 	if (srat_physaddr == 0)
355 		return;
356 	for (i = 0; i < MAXCPU; i++) {
357 		if (CPU_ABSENT(i))
358 			continue;
359 		pc = pcpu_find(i);
360 		KASSERT(pc != NULL, ("no pcpu data for CPU %u", i));
361 		cpu = &cpus[pc->pc_apic_id];
362 		if (!cpu->enabled)
363 			panic("SRAT: CPU with APIC ID %u is not known",
364 			    pc->pc_apic_id);
365 		pc->pc_domain = cpu->domain;
366 		CPU_SET(i, &cpuset_domain[cpu->domain]);
367 		if (bootverbose)
368 			printf("SRAT: CPU %u has memory domain %d\n", i,
369 			    cpu->domain);
370 	}
371 }
372 SYSINIT(srat_set_cpus, SI_SUB_CPU, SI_ORDER_ANY, srat_set_cpus, NULL);
373 
374 /*
375  * Map a _PXM value to a VM domain ID.
376  *
377  * Returns the domain ID, or -1 if no domain ID was found.
378  */
379 int
380 acpi_map_pxm_to_vm_domainid(int pxm)
381 {
382 	int i;
383 
384 	for (i = 0; i < vm_ndomains; i++) {
385 		if (vm_domains[i] == pxm)
386 			return (i);
387 	}
388 
389 	return (-1);
390 }
391 
392 #endif /* MAXMEMDOM > 1 */
393