1 /* 2 * Copyright (c) 1998 Matthew Dillon, 3 * Copyright (c) 1994 John S. Dyson 4 * Copyright (c) 1990 University of Utah. 5 * Copyright (c) 1991, 1993 6 * The Regents of the University of California. All rights reserved. 7 * 8 * This code is derived from software contributed to Berkeley by 9 * the Systems Programming Group of the University of Utah Computer 10 * Science Department. 11 * 12 * Redistribution and use in source and binary forms, with or without 13 * modification, are permitted provided that the following conditions 14 * are met: 15 * 1. Redistributions of source code must retain the above copyright 16 * notice, this list of conditions and the following disclaimer. 17 * 2. Redistributions in binary form must reproduce the above copyright 18 * notice, this list of conditions and the following disclaimer in the 19 * documentation and/or other materials provided with the distribution. 20 * 3. All advertising materials mentioning features or use of this software 21 * must display the following acknowledgement: 22 * This product includes software developed by the University of 23 * California, Berkeley and its contributors. 24 * 4. Neither the name of the University nor the names of its contributors 25 * may be used to endorse or promote products derived from this software 26 * without specific prior written permission. 27 * 28 * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND 29 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE 30 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE 31 * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE 32 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL 33 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS 34 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) 35 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT 36 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY 37 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF 38 * SUCH DAMAGE. 39 * 40 * New Swap System 41 * Matthew Dillon 42 * 43 * Radix Bitmap 'blists'. 44 * 45 * - The new swapper uses the new radix bitmap code. This should scale 46 * to arbitrarily small or arbitrarily large swap spaces and an almost 47 * arbitrary degree of fragmentation. 48 * 49 * Features: 50 * 51 * - on the fly reallocation of swap during putpages. The new system 52 * does not try to keep previously allocated swap blocks for dirty 53 * pages. 54 * 55 * - on the fly deallocation of swap 56 * 57 * - No more garbage collection required. Unnecessarily allocated swap 58 * blocks only exist for dirty vm_page_t's now and these are already 59 * cycled (in a high-load system) by the pager. We also do on-the-fly 60 * removal of invalidated swap blocks when a page is destroyed 61 * or renamed. 62 * 63 * from: Utah $Hdr: swap_pager.c 1.4 91/04/30$ 64 * 65 * @(#)swap_pager.c 8.9 (Berkeley) 3/21/94 66 * 67 * $FreeBSD$ 68 */ 69 70 #include <sys/param.h> 71 #include <sys/systm.h> 72 #include <sys/conf.h> 73 #include <sys/kernel.h> 74 #include <sys/proc.h> 75 #include <sys/bio.h> 76 #include <sys/buf.h> 77 #include <sys/vnode.h> 78 #include <sys/malloc.h> 79 #include <sys/vmmeter.h> 80 #include <sys/sysctl.h> 81 #include <sys/blist.h> 82 #include <sys/lock.h> 83 #include <sys/sx.h> 84 #include <sys/vmmeter.h> 85 86 #ifndef MAX_PAGEOUT_CLUSTER 87 #define MAX_PAGEOUT_CLUSTER 16 88 #endif 89 90 #define SWB_NPAGES MAX_PAGEOUT_CLUSTER 91 92 #include "opt_swap.h" 93 #include <vm/vm.h> 94 #include <vm/pmap.h> 95 #include <vm/vm_map.h> 96 #include <vm/vm_kern.h> 97 #include <vm/vm_object.h> 98 #include <vm/vm_page.h> 99 #include <vm/vm_pager.h> 100 #include <vm/vm_pageout.h> 101 #include <vm/swap_pager.h> 102 #include <vm/vm_extern.h> 103 #include <vm/uma.h> 104 105 #define SWM_FREE 0x02 /* free, period */ 106 #define SWM_POP 0x04 /* pop out */ 107 108 /* 109 * vm_swap_size is in page-sized chunks now. It was DEV_BSIZE'd chunks 110 * in the old system. 111 */ 112 extern int vm_swap_size; /* number of free swap blocks, in pages */ 113 114 int swap_pager_full; /* swap space exhaustion (task killing) */ 115 static int swap_pager_almost_full; /* swap space exhaustion (w/ hysteresis)*/ 116 static int nsw_rcount; /* free read buffers */ 117 static int nsw_wcount_sync; /* limit write buffers / synchronous */ 118 static int nsw_wcount_async; /* limit write buffers / asynchronous */ 119 static int nsw_wcount_async_max;/* assigned maximum */ 120 static int nsw_cluster_max; /* maximum VOP I/O allowed */ 121 122 struct blist *swapblist; 123 static struct swblock **swhash; 124 static int swhash_mask; 125 static int swap_async_max = 4; /* maximum in-progress async I/O's */ 126 static struct sx sw_alloc_sx; 127 128 /* from vm_swap.c */ 129 extern struct vnode *swapdev_vp; 130 extern struct swdevt *swdevt; 131 extern int nswdev; 132 133 SYSCTL_INT(_vm, OID_AUTO, swap_async_max, 134 CTLFLAG_RW, &swap_async_max, 0, "Maximum running async swap ops"); 135 136 #define BLK2DEVIDX(blk) (nswdev > 1 ? blk / dmmax % nswdev : 0) 137 138 /* 139 * "named" and "unnamed" anon region objects. Try to reduce the overhead 140 * of searching a named list by hashing it just a little. 141 */ 142 143 #define NOBJLISTS 8 144 145 #define NOBJLIST(handle) \ 146 (&swap_pager_object_list[((int)(intptr_t)handle >> 4) & (NOBJLISTS-1)]) 147 148 static struct mtx sw_alloc_mtx; /* protect list manipulation */ 149 static struct pagerlst swap_pager_object_list[NOBJLISTS]; 150 struct pagerlst swap_pager_un_object_list; 151 uma_zone_t swap_zone; 152 153 /* 154 * pagerops for OBJT_SWAP - "swap pager". Some ops are also global procedure 155 * calls hooked from other parts of the VM system and do not appear here. 156 * (see vm/swap_pager.h). 157 */ 158 static vm_object_t 159 swap_pager_alloc(void *handle, vm_ooffset_t size, 160 vm_prot_t prot, vm_ooffset_t offset); 161 static void swap_pager_dealloc(vm_object_t object); 162 static int swap_pager_getpages(vm_object_t, vm_page_t *, int, int); 163 static void swap_pager_init(void); 164 static void swap_pager_unswapped(vm_page_t); 165 static void swap_pager_strategy(vm_object_t, struct bio *); 166 167 struct pagerops swappagerops = { 168 swap_pager_init, /* early system initialization of pager */ 169 swap_pager_alloc, /* allocate an OBJT_SWAP object */ 170 swap_pager_dealloc, /* deallocate an OBJT_SWAP object */ 171 swap_pager_getpages, /* pagein */ 172 swap_pager_putpages, /* pageout */ 173 swap_pager_haspage, /* get backing store status for page */ 174 swap_pager_unswapped, /* remove swap related to page */ 175 swap_pager_strategy /* pager strategy call */ 176 }; 177 178 static struct buf *getchainbuf(struct bio *bp, struct vnode *vp, int flags); 179 static void flushchainbuf(struct buf *nbp); 180 static void waitchainbuf(struct bio *bp, int count, int done); 181 182 /* 183 * dmmax is in page-sized chunks with the new swap system. It was 184 * dev-bsized chunks in the old. dmmax is always a power of 2. 185 * 186 * swap_*() routines are externally accessible. swp_*() routines are 187 * internal. 188 */ 189 int dmmax; 190 static int dmmax_mask; 191 int nswap_lowat = 128; /* in pages, swap_pager_almost_full warn */ 192 int nswap_hiwat = 512; /* in pages, swap_pager_almost_full warn */ 193 194 SYSCTL_INT(_vm, OID_AUTO, dmmax, 195 CTLFLAG_RD, &dmmax, 0, "Maximum size of a swap block"); 196 197 static __inline void swp_sizecheck(void); 198 static void swp_pager_sync_iodone(struct buf *bp); 199 static void swp_pager_async_iodone(struct buf *bp); 200 201 /* 202 * Swap bitmap functions 203 */ 204 static __inline void swp_pager_freeswapspace(daddr_t blk, int npages); 205 static __inline daddr_t swp_pager_getswapspace(int npages); 206 207 /* 208 * Metadata functions 209 */ 210 static void swp_pager_meta_build(vm_object_t, vm_pindex_t, daddr_t); 211 static void swp_pager_meta_free(vm_object_t, vm_pindex_t, daddr_t); 212 static void swp_pager_meta_free_all(vm_object_t); 213 static daddr_t swp_pager_meta_ctl(vm_object_t, vm_pindex_t, int); 214 215 /* 216 * SWP_SIZECHECK() - update swap_pager_full indication 217 * 218 * update the swap_pager_almost_full indication and warn when we are 219 * about to run out of swap space, using lowat/hiwat hysteresis. 220 * 221 * Clear swap_pager_full ( task killing ) indication when lowat is met. 222 * 223 * No restrictions on call 224 * This routine may not block. 225 * This routine must be called at splvm() 226 */ 227 static __inline void 228 swp_sizecheck() 229 { 230 GIANT_REQUIRED; 231 232 if (vm_swap_size < nswap_lowat) { 233 if (swap_pager_almost_full == 0) { 234 printf("swap_pager: out of swap space\n"); 235 swap_pager_almost_full = 1; 236 } 237 } else { 238 swap_pager_full = 0; 239 if (vm_swap_size > nswap_hiwat) 240 swap_pager_almost_full = 0; 241 } 242 } 243 244 /* 245 * SWAP_PAGER_INIT() - initialize the swap pager! 246 * 247 * Expected to be started from system init. NOTE: This code is run 248 * before much else so be careful what you depend on. Most of the VM 249 * system has yet to be initialized at this point. 250 */ 251 static void 252 swap_pager_init() 253 { 254 /* 255 * Initialize object lists 256 */ 257 int i; 258 259 for (i = 0; i < NOBJLISTS; ++i) 260 TAILQ_INIT(&swap_pager_object_list[i]); 261 TAILQ_INIT(&swap_pager_un_object_list); 262 mtx_init(&sw_alloc_mtx, "swap_pager list", NULL, MTX_DEF); 263 264 /* 265 * Device Stripe, in PAGE_SIZE'd blocks 266 */ 267 dmmax = SWB_NPAGES * 2; 268 dmmax_mask = ~(dmmax - 1); 269 } 270 271 /* 272 * SWAP_PAGER_SWAP_INIT() - swap pager initialization from pageout process 273 * 274 * Expected to be started from pageout process once, prior to entering 275 * its main loop. 276 */ 277 void 278 swap_pager_swap_init() 279 { 280 int n, n2; 281 282 /* 283 * Number of in-transit swap bp operations. Don't 284 * exhaust the pbufs completely. Make sure we 285 * initialize workable values (0 will work for hysteresis 286 * but it isn't very efficient). 287 * 288 * The nsw_cluster_max is constrained by the bp->b_pages[] 289 * array (MAXPHYS/PAGE_SIZE) and our locally defined 290 * MAX_PAGEOUT_CLUSTER. Also be aware that swap ops are 291 * constrained by the swap device interleave stripe size. 292 * 293 * Currently we hardwire nsw_wcount_async to 4. This limit is 294 * designed to prevent other I/O from having high latencies due to 295 * our pageout I/O. The value 4 works well for one or two active swap 296 * devices but is probably a little low if you have more. Even so, 297 * a higher value would probably generate only a limited improvement 298 * with three or four active swap devices since the system does not 299 * typically have to pageout at extreme bandwidths. We will want 300 * at least 2 per swap devices, and 4 is a pretty good value if you 301 * have one NFS swap device due to the command/ack latency over NFS. 302 * So it all works out pretty well. 303 */ 304 nsw_cluster_max = min((MAXPHYS/PAGE_SIZE), MAX_PAGEOUT_CLUSTER); 305 306 mtx_lock(&pbuf_mtx); 307 nsw_rcount = (nswbuf + 1) / 2; 308 nsw_wcount_sync = (nswbuf + 3) / 4; 309 nsw_wcount_async = 4; 310 nsw_wcount_async_max = nsw_wcount_async; 311 mtx_unlock(&pbuf_mtx); 312 313 /* 314 * Initialize our zone. Right now I'm just guessing on the number 315 * we need based on the number of pages in the system. Each swblock 316 * can hold 16 pages, so this is probably overkill. This reservation 317 * is typically limited to around 70MB by default. 318 */ 319 n = cnt.v_page_count; 320 if (maxswzone && n > maxswzone / sizeof(struct swblock)) 321 n = maxswzone / sizeof(struct swblock); 322 n2 = n; 323 swap_zone = uma_zcreate("SWAPMETA", sizeof(struct swblock), NULL, NULL, 324 NULL, NULL, UMA_ALIGN_PTR, UMA_ZONE_NOFREE); 325 do { 326 if (uma_zone_set_obj(swap_zone, NULL, n)) 327 break; 328 /* 329 * if the allocation failed, try a zone two thirds the 330 * size of the previous attempt. 331 */ 332 n -= ((n + 2) / 3); 333 } while (n > 0); 334 if (swap_zone == NULL) 335 panic("failed to create swap_zone."); 336 if (n2 != n) 337 printf("Swap zone entries reduced from %d to %d.\n", n2, n); 338 n2 = n; 339 340 /* 341 * Initialize our meta-data hash table. The swapper does not need to 342 * be quite as efficient as the VM system, so we do not use an 343 * oversized hash table. 344 * 345 * n: size of hash table, must be power of 2 346 * swhash_mask: hash table index mask 347 */ 348 for (n = 1; n < n2 / 8; n *= 2) 349 ; 350 swhash = malloc(sizeof(struct swblock *) * n, M_VMPGDATA, M_WAITOK | M_ZERO); 351 swhash_mask = n - 1; 352 } 353 354 /* 355 * SWAP_PAGER_ALLOC() - allocate a new OBJT_SWAP VM object and instantiate 356 * its metadata structures. 357 * 358 * This routine is called from the mmap and fork code to create a new 359 * OBJT_SWAP object. We do this by creating an OBJT_DEFAULT object 360 * and then converting it with swp_pager_meta_build(). 361 * 362 * This routine may block in vm_object_allocate() and create a named 363 * object lookup race, so we must interlock. We must also run at 364 * splvm() for the object lookup to handle races with interrupts, but 365 * we do not have to maintain splvm() in between the lookup and the 366 * add because (I believe) it is not possible to attempt to create 367 * a new swap object w/handle when a default object with that handle 368 * already exists. 369 * 370 * MPSAFE 371 */ 372 static vm_object_t 373 swap_pager_alloc(void *handle, vm_ooffset_t size, vm_prot_t prot, 374 vm_ooffset_t offset) 375 { 376 vm_object_t object; 377 378 mtx_lock(&Giant); 379 if (handle) { 380 /* 381 * Reference existing named region or allocate new one. There 382 * should not be a race here against swp_pager_meta_build() 383 * as called from vm_page_remove() in regards to the lookup 384 * of the handle. 385 */ 386 sx_xlock(&sw_alloc_sx); 387 object = vm_pager_object_lookup(NOBJLIST(handle), handle); 388 389 if (object != NULL) { 390 vm_object_reference(object); 391 } else { 392 object = vm_object_allocate(OBJT_DEFAULT, 393 OFF_TO_IDX(offset + PAGE_MASK + size)); 394 object->handle = handle; 395 396 swp_pager_meta_build(object, 0, SWAPBLK_NONE); 397 } 398 sx_xunlock(&sw_alloc_sx); 399 } else { 400 object = vm_object_allocate(OBJT_DEFAULT, 401 OFF_TO_IDX(offset + PAGE_MASK + size)); 402 403 swp_pager_meta_build(object, 0, SWAPBLK_NONE); 404 } 405 mtx_unlock(&Giant); 406 return (object); 407 } 408 409 /* 410 * SWAP_PAGER_DEALLOC() - remove swap metadata from object 411 * 412 * The swap backing for the object is destroyed. The code is 413 * designed such that we can reinstantiate it later, but this 414 * routine is typically called only when the entire object is 415 * about to be destroyed. 416 * 417 * This routine may block, but no longer does. 418 * 419 * The object must be locked or unreferenceable. 420 */ 421 static void 422 swap_pager_dealloc(object) 423 vm_object_t object; 424 { 425 int s; 426 427 GIANT_REQUIRED; 428 429 /* 430 * Remove from list right away so lookups will fail if we block for 431 * pageout completion. 432 */ 433 mtx_lock(&sw_alloc_mtx); 434 if (object->handle == NULL) { 435 TAILQ_REMOVE(&swap_pager_un_object_list, object, pager_object_list); 436 } else { 437 TAILQ_REMOVE(NOBJLIST(object->handle), object, pager_object_list); 438 } 439 mtx_unlock(&sw_alloc_mtx); 440 441 vm_object_pip_wait(object, "swpdea"); 442 443 /* 444 * Free all remaining metadata. We only bother to free it from 445 * the swap meta data. We do not attempt to free swapblk's still 446 * associated with vm_page_t's for this object. We do not care 447 * if paging is still in progress on some objects. 448 */ 449 s = splvm(); 450 swp_pager_meta_free_all(object); 451 splx(s); 452 } 453 454 /************************************************************************ 455 * SWAP PAGER BITMAP ROUTINES * 456 ************************************************************************/ 457 458 /* 459 * SWP_PAGER_GETSWAPSPACE() - allocate raw swap space 460 * 461 * Allocate swap for the requested number of pages. The starting 462 * swap block number (a page index) is returned or SWAPBLK_NONE 463 * if the allocation failed. 464 * 465 * Also has the side effect of advising that somebody made a mistake 466 * when they configured swap and didn't configure enough. 467 * 468 * Must be called at splvm() to avoid races with bitmap frees from 469 * vm_page_remove() aka swap_pager_page_removed(). 470 * 471 * This routine may not block 472 * This routine must be called at splvm(). 473 */ 474 static __inline daddr_t 475 swp_pager_getswapspace(npages) 476 int npages; 477 { 478 daddr_t blk; 479 480 GIANT_REQUIRED; 481 482 if ((blk = blist_alloc(swapblist, npages)) == SWAPBLK_NONE) { 483 if (swap_pager_full != 2) { 484 printf("swap_pager_getswapspace: failed\n"); 485 swap_pager_full = 2; 486 swap_pager_almost_full = 1; 487 } 488 } else { 489 vm_swap_size -= npages; 490 /* per-swap area stats */ 491 swdevt[BLK2DEVIDX(blk)].sw_used += npages; 492 swp_sizecheck(); 493 } 494 return (blk); 495 } 496 497 /* 498 * SWP_PAGER_FREESWAPSPACE() - free raw swap space 499 * 500 * This routine returns the specified swap blocks back to the bitmap. 501 * 502 * Note: This routine may not block (it could in the old swap code), 503 * and through the use of the new blist routines it does not block. 504 * 505 * We must be called at splvm() to avoid races with bitmap frees from 506 * vm_page_remove() aka swap_pager_page_removed(). 507 * 508 * This routine may not block 509 * This routine must be called at splvm(). 510 */ 511 static __inline void 512 swp_pager_freeswapspace(blk, npages) 513 daddr_t blk; 514 int npages; 515 { 516 GIANT_REQUIRED; 517 518 blist_free(swapblist, blk, npages); 519 vm_swap_size += npages; 520 /* per-swap area stats */ 521 swdevt[BLK2DEVIDX(blk)].sw_used -= npages; 522 swp_sizecheck(); 523 } 524 525 /* 526 * SWAP_PAGER_FREESPACE() - frees swap blocks associated with a page 527 * range within an object. 528 * 529 * This is a globally accessible routine. 530 * 531 * This routine removes swapblk assignments from swap metadata. 532 * 533 * The external callers of this routine typically have already destroyed 534 * or renamed vm_page_t's associated with this range in the object so 535 * we should be ok. 536 * 537 * This routine may be called at any spl. We up our spl to splvm temporarily 538 * in order to perform the metadata removal. 539 */ 540 void 541 swap_pager_freespace(object, start, size) 542 vm_object_t object; 543 vm_pindex_t start; 544 vm_size_t size; 545 { 546 int s = splvm(); 547 548 GIANT_REQUIRED; 549 swp_pager_meta_free(object, start, size); 550 splx(s); 551 } 552 553 /* 554 * SWAP_PAGER_RESERVE() - reserve swap blocks in object 555 * 556 * Assigns swap blocks to the specified range within the object. The 557 * swap blocks are not zerod. Any previous swap assignment is destroyed. 558 * 559 * Returns 0 on success, -1 on failure. 560 */ 561 int 562 swap_pager_reserve(vm_object_t object, vm_pindex_t start, vm_size_t size) 563 { 564 int s; 565 int n = 0; 566 daddr_t blk = SWAPBLK_NONE; 567 vm_pindex_t beg = start; /* save start index */ 568 569 s = splvm(); 570 while (size) { 571 if (n == 0) { 572 n = BLIST_MAX_ALLOC; 573 while ((blk = swp_pager_getswapspace(n)) == SWAPBLK_NONE) { 574 n >>= 1; 575 if (n == 0) { 576 swp_pager_meta_free(object, beg, start - beg); 577 splx(s); 578 return (-1); 579 } 580 } 581 } 582 swp_pager_meta_build(object, start, blk); 583 --size; 584 ++start; 585 ++blk; 586 --n; 587 } 588 swp_pager_meta_free(object, start, n); 589 splx(s); 590 return (0); 591 } 592 593 /* 594 * SWAP_PAGER_COPY() - copy blocks from source pager to destination pager 595 * and destroy the source. 596 * 597 * Copy any valid swapblks from the source to the destination. In 598 * cases where both the source and destination have a valid swapblk, 599 * we keep the destination's. 600 * 601 * This routine is allowed to block. It may block allocating metadata 602 * indirectly through swp_pager_meta_build() or if paging is still in 603 * progress on the source. 604 * 605 * This routine can be called at any spl 606 * 607 * XXX vm_page_collapse() kinda expects us not to block because we 608 * supposedly do not need to allocate memory, but for the moment we 609 * *may* have to get a little memory from the zone allocator, but 610 * it is taken from the interrupt memory. We should be ok. 611 * 612 * The source object contains no vm_page_t's (which is just as well) 613 * 614 * The source object is of type OBJT_SWAP. 615 * 616 * The source and destination objects must be locked or 617 * inaccessible (XXX are they ?) 618 */ 619 void 620 swap_pager_copy(srcobject, dstobject, offset, destroysource) 621 vm_object_t srcobject; 622 vm_object_t dstobject; 623 vm_pindex_t offset; 624 int destroysource; 625 { 626 vm_pindex_t i; 627 int s; 628 629 GIANT_REQUIRED; 630 631 s = splvm(); 632 /* 633 * If destroysource is set, we remove the source object from the 634 * swap_pager internal queue now. 635 */ 636 if (destroysource) { 637 mtx_lock(&sw_alloc_mtx); 638 if (srcobject->handle == NULL) { 639 TAILQ_REMOVE( 640 &swap_pager_un_object_list, 641 srcobject, 642 pager_object_list 643 ); 644 } else { 645 TAILQ_REMOVE( 646 NOBJLIST(srcobject->handle), 647 srcobject, 648 pager_object_list 649 ); 650 } 651 mtx_unlock(&sw_alloc_mtx); 652 } 653 654 /* 655 * transfer source to destination. 656 */ 657 for (i = 0; i < dstobject->size; ++i) { 658 daddr_t dstaddr; 659 660 /* 661 * Locate (without changing) the swapblk on the destination, 662 * unless it is invalid in which case free it silently, or 663 * if the destination is a resident page, in which case the 664 * source is thrown away. 665 */ 666 dstaddr = swp_pager_meta_ctl(dstobject, i, 0); 667 668 if (dstaddr == SWAPBLK_NONE) { 669 /* 670 * Destination has no swapblk and is not resident, 671 * copy source. 672 */ 673 daddr_t srcaddr; 674 675 srcaddr = swp_pager_meta_ctl( 676 srcobject, 677 i + offset, 678 SWM_POP 679 ); 680 681 if (srcaddr != SWAPBLK_NONE) 682 swp_pager_meta_build(dstobject, i, srcaddr); 683 } else { 684 /* 685 * Destination has valid swapblk or it is represented 686 * by a resident page. We destroy the sourceblock. 687 */ 688 689 swp_pager_meta_ctl(srcobject, i + offset, SWM_FREE); 690 } 691 } 692 693 /* 694 * Free left over swap blocks in source. 695 * 696 * We have to revert the type to OBJT_DEFAULT so we do not accidently 697 * double-remove the object from the swap queues. 698 */ 699 if (destroysource) { 700 swp_pager_meta_free_all(srcobject); 701 /* 702 * Reverting the type is not necessary, the caller is going 703 * to destroy srcobject directly, but I'm doing it here 704 * for consistency since we've removed the object from its 705 * queues. 706 */ 707 srcobject->type = OBJT_DEFAULT; 708 } 709 splx(s); 710 } 711 712 /* 713 * SWAP_PAGER_HASPAGE() - determine if we have good backing store for 714 * the requested page. 715 * 716 * We determine whether good backing store exists for the requested 717 * page and return TRUE if it does, FALSE if it doesn't. 718 * 719 * If TRUE, we also try to determine how much valid, contiguous backing 720 * store exists before and after the requested page within a reasonable 721 * distance. We do not try to restrict it to the swap device stripe 722 * (that is handled in getpages/putpages). It probably isn't worth 723 * doing here. 724 */ 725 boolean_t 726 swap_pager_haspage(object, pindex, before, after) 727 vm_object_t object; 728 vm_pindex_t pindex; 729 int *before; 730 int *after; 731 { 732 daddr_t blk0; 733 int s; 734 735 /* 736 * do we have good backing store at the requested index ? 737 */ 738 s = splvm(); 739 blk0 = swp_pager_meta_ctl(object, pindex, 0); 740 741 if (blk0 == SWAPBLK_NONE) { 742 splx(s); 743 if (before) 744 *before = 0; 745 if (after) 746 *after = 0; 747 return (FALSE); 748 } 749 750 /* 751 * find backwards-looking contiguous good backing store 752 */ 753 if (before != NULL) { 754 int i; 755 756 for (i = 1; i < (SWB_NPAGES/2); ++i) { 757 daddr_t blk; 758 759 if (i > pindex) 760 break; 761 blk = swp_pager_meta_ctl(object, pindex - i, 0); 762 if (blk != blk0 - i) 763 break; 764 } 765 *before = (i - 1); 766 } 767 768 /* 769 * find forward-looking contiguous good backing store 770 */ 771 if (after != NULL) { 772 int i; 773 774 for (i = 1; i < (SWB_NPAGES/2); ++i) { 775 daddr_t blk; 776 777 blk = swp_pager_meta_ctl(object, pindex + i, 0); 778 if (blk != blk0 + i) 779 break; 780 } 781 *after = (i - 1); 782 } 783 splx(s); 784 return (TRUE); 785 } 786 787 /* 788 * SWAP_PAGER_PAGE_UNSWAPPED() - remove swap backing store related to page 789 * 790 * This removes any associated swap backing store, whether valid or 791 * not, from the page. 792 * 793 * This routine is typically called when a page is made dirty, at 794 * which point any associated swap can be freed. MADV_FREE also 795 * calls us in a special-case situation 796 * 797 * NOTE!!! If the page is clean and the swap was valid, the caller 798 * should make the page dirty before calling this routine. This routine 799 * does NOT change the m->dirty status of the page. Also: MADV_FREE 800 * depends on it. 801 * 802 * This routine may not block 803 * This routine must be called at splvm() 804 */ 805 static void 806 swap_pager_unswapped(m) 807 vm_page_t m; 808 { 809 swp_pager_meta_ctl(m->object, m->pindex, SWM_FREE); 810 } 811 812 /* 813 * SWAP_PAGER_STRATEGY() - read, write, free blocks 814 * 815 * This implements the vm_pager_strategy() interface to swap and allows 816 * other parts of the system to directly access swap as backing store 817 * through vm_objects of type OBJT_SWAP. This is intended to be a 818 * cacheless interface ( i.e. caching occurs at higher levels ). 819 * Therefore we do not maintain any resident pages. All I/O goes 820 * directly to and from the swap device. 821 * 822 * Note that b_blkno is scaled for PAGE_SIZE 823 * 824 * We currently attempt to run I/O synchronously or asynchronously as 825 * the caller requests. This isn't perfect because we loose error 826 * sequencing when we run multiple ops in parallel to satisfy a request. 827 * But this is swap, so we let it all hang out. 828 */ 829 static void 830 swap_pager_strategy(vm_object_t object, struct bio *bp) 831 { 832 vm_pindex_t start; 833 int count; 834 int s; 835 char *data; 836 struct buf *nbp = NULL; 837 838 GIANT_REQUIRED; 839 840 /* XXX: KASSERT instead ? */ 841 if (bp->bio_bcount & PAGE_MASK) { 842 biofinish(bp, NULL, EINVAL); 843 printf("swap_pager_strategy: bp %p blk %d size %d, not page bounded\n", bp, (int)bp->bio_pblkno, (int)bp->bio_bcount); 844 return; 845 } 846 847 /* 848 * Clear error indication, initialize page index, count, data pointer. 849 */ 850 bp->bio_error = 0; 851 bp->bio_flags &= ~BIO_ERROR; 852 bp->bio_resid = bp->bio_bcount; 853 *(u_int *) &bp->bio_driver1 = 0; 854 855 start = bp->bio_pblkno; 856 count = howmany(bp->bio_bcount, PAGE_SIZE); 857 data = bp->bio_data; 858 859 s = splvm(); 860 861 /* 862 * Deal with BIO_DELETE 863 */ 864 if (bp->bio_cmd == BIO_DELETE) { 865 /* 866 * FREE PAGE(s) - destroy underlying swap that is no longer 867 * needed. 868 */ 869 swp_pager_meta_free(object, start, count); 870 splx(s); 871 bp->bio_resid = 0; 872 biodone(bp); 873 return; 874 } 875 876 /* 877 * Execute read or write 878 */ 879 while (count > 0) { 880 daddr_t blk; 881 882 /* 883 * Obtain block. If block not found and writing, allocate a 884 * new block and build it into the object. 885 */ 886 887 blk = swp_pager_meta_ctl(object, start, 0); 888 if ((blk == SWAPBLK_NONE) && (bp->bio_cmd == BIO_WRITE)) { 889 blk = swp_pager_getswapspace(1); 890 if (blk == SWAPBLK_NONE) { 891 bp->bio_error = ENOMEM; 892 bp->bio_flags |= BIO_ERROR; 893 break; 894 } 895 swp_pager_meta_build(object, start, blk); 896 } 897 898 /* 899 * Do we have to flush our current collection? Yes if: 900 * 901 * - no swap block at this index 902 * - swap block is not contiguous 903 * - we cross a physical disk boundry in the 904 * stripe. 905 */ 906 if ( 907 nbp && (nbp->b_blkno + btoc(nbp->b_bcount) != blk || 908 ((nbp->b_blkno ^ blk) & dmmax_mask) 909 ) 910 ) { 911 splx(s); 912 if (bp->bio_cmd == BIO_READ) { 913 ++cnt.v_swapin; 914 cnt.v_swappgsin += btoc(nbp->b_bcount); 915 } else { 916 ++cnt.v_swapout; 917 cnt.v_swappgsout += btoc(nbp->b_bcount); 918 nbp->b_dirtyend = nbp->b_bcount; 919 } 920 flushchainbuf(nbp); 921 s = splvm(); 922 nbp = NULL; 923 } 924 925 /* 926 * Add new swapblk to nbp, instantiating nbp if necessary. 927 * Zero-fill reads are able to take a shortcut. 928 */ 929 if (blk == SWAPBLK_NONE) { 930 /* 931 * We can only get here if we are reading. Since 932 * we are at splvm() we can safely modify b_resid, 933 * even if chain ops are in progress. 934 */ 935 bzero(data, PAGE_SIZE); 936 bp->bio_resid -= PAGE_SIZE; 937 } else { 938 if (nbp == NULL) { 939 nbp = getchainbuf(bp, swapdev_vp, B_ASYNC); 940 nbp->b_blkno = blk; 941 nbp->b_bcount = 0; 942 nbp->b_data = data; 943 } 944 nbp->b_bcount += PAGE_SIZE; 945 } 946 --count; 947 ++start; 948 data += PAGE_SIZE; 949 } 950 951 /* 952 * Flush out last buffer 953 */ 954 splx(s); 955 956 if (nbp) { 957 if (nbp->b_iocmd == BIO_READ) { 958 ++cnt.v_swapin; 959 cnt.v_swappgsin += btoc(nbp->b_bcount); 960 } else { 961 ++cnt.v_swapout; 962 cnt.v_swappgsout += btoc(nbp->b_bcount); 963 nbp->b_dirtyend = nbp->b_bcount; 964 } 965 flushchainbuf(nbp); 966 /* nbp = NULL; */ 967 } 968 /* 969 * Wait for completion. 970 */ 971 waitchainbuf(bp, 0, 1); 972 } 973 974 /* 975 * SWAP_PAGER_GETPAGES() - bring pages in from swap 976 * 977 * Attempt to retrieve (m, count) pages from backing store, but make 978 * sure we retrieve at least m[reqpage]. We try to load in as large 979 * a chunk surrounding m[reqpage] as is contiguous in swap and which 980 * belongs to the same object. 981 * 982 * The code is designed for asynchronous operation and 983 * immediate-notification of 'reqpage' but tends not to be 984 * used that way. Please do not optimize-out this algorithmic 985 * feature, I intend to improve on it in the future. 986 * 987 * The parent has a single vm_object_pip_add() reference prior to 988 * calling us and we should return with the same. 989 * 990 * The parent has BUSY'd the pages. We should return with 'm' 991 * left busy, but the others adjusted. 992 */ 993 static int 994 swap_pager_getpages(object, m, count, reqpage) 995 vm_object_t object; 996 vm_page_t *m; 997 int count, reqpage; 998 { 999 struct buf *bp; 1000 vm_page_t mreq; 1001 int s; 1002 int i; 1003 int j; 1004 daddr_t blk; 1005 vm_offset_t kva; 1006 vm_pindex_t lastpindex; 1007 1008 GIANT_REQUIRED; 1009 1010 mreq = m[reqpage]; 1011 1012 if (mreq->object != object) { 1013 panic("swap_pager_getpages: object mismatch %p/%p", 1014 object, 1015 mreq->object 1016 ); 1017 } 1018 /* 1019 * Calculate range to retrieve. The pages have already been assigned 1020 * their swapblks. We require a *contiguous* range that falls entirely 1021 * within a single device stripe. If we do not supply it, bad things 1022 * happen. Note that blk, iblk & jblk can be SWAPBLK_NONE, but the 1023 * loops are set up such that the case(s) are handled implicitly. 1024 * 1025 * The swp_*() calls must be made at splvm(). vm_page_free() does 1026 * not need to be, but it will go a little faster if it is. 1027 */ 1028 s = splvm(); 1029 blk = swp_pager_meta_ctl(mreq->object, mreq->pindex, 0); 1030 1031 for (i = reqpage - 1; i >= 0; --i) { 1032 daddr_t iblk; 1033 1034 iblk = swp_pager_meta_ctl(m[i]->object, m[i]->pindex, 0); 1035 if (blk != iblk + (reqpage - i)) 1036 break; 1037 if ((blk ^ iblk) & dmmax_mask) 1038 break; 1039 } 1040 ++i; 1041 1042 for (j = reqpage + 1; j < count; ++j) { 1043 daddr_t jblk; 1044 1045 jblk = swp_pager_meta_ctl(m[j]->object, m[j]->pindex, 0); 1046 if (blk != jblk - (j - reqpage)) 1047 break; 1048 if ((blk ^ jblk) & dmmax_mask) 1049 break; 1050 } 1051 1052 /* 1053 * free pages outside our collection range. Note: we never free 1054 * mreq, it must remain busy throughout. 1055 */ 1056 vm_page_lock_queues(); 1057 { 1058 int k; 1059 1060 for (k = 0; k < i; ++k) 1061 vm_page_free(m[k]); 1062 for (k = j; k < count; ++k) 1063 vm_page_free(m[k]); 1064 } 1065 vm_page_unlock_queues(); 1066 splx(s); 1067 1068 1069 /* 1070 * Return VM_PAGER_FAIL if we have nothing to do. Return mreq 1071 * still busy, but the others unbusied. 1072 */ 1073 if (blk == SWAPBLK_NONE) 1074 return (VM_PAGER_FAIL); 1075 1076 /* 1077 * Get a swap buffer header to perform the IO 1078 */ 1079 bp = getpbuf(&nsw_rcount); 1080 kva = (vm_offset_t) bp->b_data; 1081 1082 /* 1083 * map our page(s) into kva for input 1084 * 1085 * NOTE: B_PAGING is set by pbgetvp() 1086 */ 1087 pmap_qenter(kva, m + i, j - i); 1088 1089 bp->b_iocmd = BIO_READ; 1090 bp->b_iodone = swp_pager_async_iodone; 1091 bp->b_rcred = crhold(thread0.td_ucred); 1092 bp->b_wcred = crhold(thread0.td_ucred); 1093 bp->b_data = (caddr_t) kva; 1094 bp->b_blkno = blk - (reqpage - i); 1095 bp->b_bcount = PAGE_SIZE * (j - i); 1096 bp->b_bufsize = PAGE_SIZE * (j - i); 1097 bp->b_pager.pg_reqpage = reqpage - i; 1098 1099 { 1100 int k; 1101 1102 for (k = i; k < j; ++k) { 1103 bp->b_pages[k - i] = m[k]; 1104 vm_page_flag_set(m[k], PG_SWAPINPROG); 1105 } 1106 } 1107 bp->b_npages = j - i; 1108 1109 pbgetvp(swapdev_vp, bp); 1110 1111 cnt.v_swapin++; 1112 cnt.v_swappgsin += bp->b_npages; 1113 1114 /* 1115 * We still hold the lock on mreq, and our automatic completion routine 1116 * does not remove it. 1117 */ 1118 vm_object_pip_add(mreq->object, bp->b_npages); 1119 lastpindex = m[j-1]->pindex; 1120 1121 /* 1122 * perform the I/O. NOTE!!! bp cannot be considered valid after 1123 * this point because we automatically release it on completion. 1124 * Instead, we look at the one page we are interested in which we 1125 * still hold a lock on even through the I/O completion. 1126 * 1127 * The other pages in our m[] array are also released on completion, 1128 * so we cannot assume they are valid anymore either. 1129 * 1130 * NOTE: b_blkno is destroyed by the call to VOP_STRATEGY 1131 */ 1132 BUF_KERNPROC(bp); 1133 BUF_STRATEGY(bp); 1134 1135 /* 1136 * wait for the page we want to complete. PG_SWAPINPROG is always 1137 * cleared on completion. If an I/O error occurs, SWAPBLK_NONE 1138 * is set in the meta-data. 1139 */ 1140 s = splvm(); 1141 while ((mreq->flags & PG_SWAPINPROG) != 0) { 1142 vm_page_flag_set(mreq, PG_WANTED | PG_REFERENCED); 1143 cnt.v_intrans++; 1144 if (tsleep(mreq, PSWP, "swread", hz*20)) { 1145 printf( 1146 "swap_pager: indefinite wait buffer: device:" 1147 " %s, blkno: %ld, size: %ld\n", 1148 devtoname(bp->b_dev), (long)bp->b_blkno, 1149 bp->b_bcount 1150 ); 1151 } 1152 } 1153 splx(s); 1154 1155 /* 1156 * mreq is left busied after completion, but all the other pages 1157 * are freed. If we had an unrecoverable read error the page will 1158 * not be valid. 1159 */ 1160 if (mreq->valid != VM_PAGE_BITS_ALL) { 1161 return (VM_PAGER_ERROR); 1162 } else { 1163 return (VM_PAGER_OK); 1164 } 1165 1166 /* 1167 * A final note: in a low swap situation, we cannot deallocate swap 1168 * and mark a page dirty here because the caller is likely to mark 1169 * the page clean when we return, causing the page to possibly revert 1170 * to all-zero's later. 1171 */ 1172 } 1173 1174 /* 1175 * swap_pager_putpages: 1176 * 1177 * Assign swap (if necessary) and initiate I/O on the specified pages. 1178 * 1179 * We support both OBJT_DEFAULT and OBJT_SWAP objects. DEFAULT objects 1180 * are automatically converted to SWAP objects. 1181 * 1182 * In a low memory situation we may block in VOP_STRATEGY(), but the new 1183 * vm_page reservation system coupled with properly written VFS devices 1184 * should ensure that no low-memory deadlock occurs. This is an area 1185 * which needs work. 1186 * 1187 * The parent has N vm_object_pip_add() references prior to 1188 * calling us and will remove references for rtvals[] that are 1189 * not set to VM_PAGER_PEND. We need to remove the rest on I/O 1190 * completion. 1191 * 1192 * The parent has soft-busy'd the pages it passes us and will unbusy 1193 * those whos rtvals[] entry is not set to VM_PAGER_PEND on return. 1194 * We need to unbusy the rest on I/O completion. 1195 */ 1196 void 1197 swap_pager_putpages(object, m, count, sync, rtvals) 1198 vm_object_t object; 1199 vm_page_t *m; 1200 int count; 1201 boolean_t sync; 1202 int *rtvals; 1203 { 1204 int i; 1205 int n = 0; 1206 1207 GIANT_REQUIRED; 1208 if (count && m[0]->object != object) { 1209 panic("swap_pager_getpages: object mismatch %p/%p", 1210 object, 1211 m[0]->object 1212 ); 1213 } 1214 /* 1215 * Step 1 1216 * 1217 * Turn object into OBJT_SWAP 1218 * check for bogus sysops 1219 * force sync if not pageout process 1220 */ 1221 if (object->type != OBJT_SWAP) 1222 swp_pager_meta_build(object, 0, SWAPBLK_NONE); 1223 1224 if (curproc != pageproc) 1225 sync = TRUE; 1226 1227 /* 1228 * Step 2 1229 * 1230 * Update nsw parameters from swap_async_max sysctl values. 1231 * Do not let the sysop crash the machine with bogus numbers. 1232 */ 1233 mtx_lock(&pbuf_mtx); 1234 if (swap_async_max != nsw_wcount_async_max) { 1235 int n; 1236 int s; 1237 1238 /* 1239 * limit range 1240 */ 1241 if ((n = swap_async_max) > nswbuf / 2) 1242 n = nswbuf / 2; 1243 if (n < 1) 1244 n = 1; 1245 swap_async_max = n; 1246 1247 /* 1248 * Adjust difference ( if possible ). If the current async 1249 * count is too low, we may not be able to make the adjustment 1250 * at this time. 1251 */ 1252 s = splvm(); 1253 n -= nsw_wcount_async_max; 1254 if (nsw_wcount_async + n >= 0) { 1255 nsw_wcount_async += n; 1256 nsw_wcount_async_max += n; 1257 wakeup(&nsw_wcount_async); 1258 } 1259 splx(s); 1260 } 1261 mtx_unlock(&pbuf_mtx); 1262 1263 /* 1264 * Step 3 1265 * 1266 * Assign swap blocks and issue I/O. We reallocate swap on the fly. 1267 * The page is left dirty until the pageout operation completes 1268 * successfully. 1269 */ 1270 for (i = 0; i < count; i += n) { 1271 int s; 1272 int j; 1273 struct buf *bp; 1274 daddr_t blk; 1275 1276 /* 1277 * Maximum I/O size is limited by a number of factors. 1278 */ 1279 n = min(BLIST_MAX_ALLOC, count - i); 1280 n = min(n, nsw_cluster_max); 1281 1282 s = splvm(); 1283 1284 /* 1285 * Get biggest block of swap we can. If we fail, fall 1286 * back and try to allocate a smaller block. Don't go 1287 * overboard trying to allocate space if it would overly 1288 * fragment swap. 1289 */ 1290 while ( 1291 (blk = swp_pager_getswapspace(n)) == SWAPBLK_NONE && 1292 n > 4 1293 ) { 1294 n >>= 1; 1295 } 1296 if (blk == SWAPBLK_NONE) { 1297 for (j = 0; j < n; ++j) 1298 rtvals[i+j] = VM_PAGER_FAIL; 1299 splx(s); 1300 continue; 1301 } 1302 1303 /* 1304 * The I/O we are constructing cannot cross a physical 1305 * disk boundry in the swap stripe. Note: we are still 1306 * at splvm(). 1307 */ 1308 if ((blk ^ (blk + n)) & dmmax_mask) { 1309 j = ((blk + dmmax) & dmmax_mask) - blk; 1310 swp_pager_freeswapspace(blk + j, n - j); 1311 n = j; 1312 } 1313 1314 /* 1315 * All I/O parameters have been satisfied, build the I/O 1316 * request and assign the swap space. 1317 * 1318 * NOTE: B_PAGING is set by pbgetvp() 1319 */ 1320 if (sync == TRUE) { 1321 bp = getpbuf(&nsw_wcount_sync); 1322 } else { 1323 bp = getpbuf(&nsw_wcount_async); 1324 bp->b_flags = B_ASYNC; 1325 } 1326 bp->b_iocmd = BIO_WRITE; 1327 bp->b_spc = NULL; /* not used, but NULL-out anyway */ 1328 1329 pmap_qenter((vm_offset_t)bp->b_data, &m[i], n); 1330 1331 bp->b_rcred = crhold(thread0.td_ucred); 1332 bp->b_wcred = crhold(thread0.td_ucred); 1333 bp->b_bcount = PAGE_SIZE * n; 1334 bp->b_bufsize = PAGE_SIZE * n; 1335 bp->b_blkno = blk; 1336 1337 pbgetvp(swapdev_vp, bp); 1338 1339 for (j = 0; j < n; ++j) { 1340 vm_page_t mreq = m[i+j]; 1341 1342 swp_pager_meta_build( 1343 mreq->object, 1344 mreq->pindex, 1345 blk + j 1346 ); 1347 vm_page_dirty(mreq); 1348 rtvals[i+j] = VM_PAGER_OK; 1349 1350 vm_page_flag_set(mreq, PG_SWAPINPROG); 1351 bp->b_pages[j] = mreq; 1352 } 1353 bp->b_npages = n; 1354 /* 1355 * Must set dirty range for NFS to work. 1356 */ 1357 bp->b_dirtyoff = 0; 1358 bp->b_dirtyend = bp->b_bcount; 1359 1360 cnt.v_swapout++; 1361 cnt.v_swappgsout += bp->b_npages; 1362 swapdev_vp->v_numoutput++; 1363 1364 splx(s); 1365 1366 /* 1367 * asynchronous 1368 * 1369 * NOTE: b_blkno is destroyed by the call to VOP_STRATEGY 1370 */ 1371 if (sync == FALSE) { 1372 bp->b_iodone = swp_pager_async_iodone; 1373 BUF_KERNPROC(bp); 1374 BUF_STRATEGY(bp); 1375 1376 for (j = 0; j < n; ++j) 1377 rtvals[i+j] = VM_PAGER_PEND; 1378 /* restart outter loop */ 1379 continue; 1380 } 1381 1382 /* 1383 * synchronous 1384 * 1385 * NOTE: b_blkno is destroyed by the call to VOP_STRATEGY 1386 */ 1387 bp->b_iodone = swp_pager_sync_iodone; 1388 BUF_STRATEGY(bp); 1389 1390 /* 1391 * Wait for the sync I/O to complete, then update rtvals. 1392 * We just set the rtvals[] to VM_PAGER_PEND so we can call 1393 * our async completion routine at the end, thus avoiding a 1394 * double-free. 1395 */ 1396 s = splbio(); 1397 while ((bp->b_flags & B_DONE) == 0) { 1398 tsleep(bp, PVM, "swwrt", 0); 1399 } 1400 for (j = 0; j < n; ++j) 1401 rtvals[i+j] = VM_PAGER_PEND; 1402 /* 1403 * Now that we are through with the bp, we can call the 1404 * normal async completion, which frees everything up. 1405 */ 1406 swp_pager_async_iodone(bp); 1407 splx(s); 1408 } 1409 } 1410 1411 /* 1412 * swap_pager_sync_iodone: 1413 * 1414 * Completion routine for synchronous reads and writes from/to swap. 1415 * We just mark the bp is complete and wake up anyone waiting on it. 1416 * 1417 * This routine may not block. This routine is called at splbio() or better. 1418 */ 1419 static void 1420 swp_pager_sync_iodone(bp) 1421 struct buf *bp; 1422 { 1423 bp->b_flags |= B_DONE; 1424 bp->b_flags &= ~B_ASYNC; 1425 wakeup(bp); 1426 } 1427 1428 /* 1429 * swp_pager_async_iodone: 1430 * 1431 * Completion routine for asynchronous reads and writes from/to swap. 1432 * Also called manually by synchronous code to finish up a bp. 1433 * 1434 * For READ operations, the pages are PG_BUSY'd. For WRITE operations, 1435 * the pages are vm_page_t->busy'd. For READ operations, we PG_BUSY 1436 * unbusy all pages except the 'main' request page. For WRITE 1437 * operations, we vm_page_t->busy'd unbusy all pages ( we can do this 1438 * because we marked them all VM_PAGER_PEND on return from putpages ). 1439 * 1440 * This routine may not block. 1441 * This routine is called at splbio() or better 1442 * 1443 * We up ourselves to splvm() as required for various vm_page related 1444 * calls. 1445 */ 1446 static void 1447 swp_pager_async_iodone(bp) 1448 struct buf *bp; 1449 { 1450 int s; 1451 int i; 1452 vm_object_t object = NULL; 1453 1454 GIANT_REQUIRED; 1455 bp->b_flags |= B_DONE; 1456 1457 /* 1458 * report error 1459 */ 1460 if (bp->b_ioflags & BIO_ERROR) { 1461 printf( 1462 "swap_pager: I/O error - %s failed; blkno %ld," 1463 "size %ld, error %d\n", 1464 ((bp->b_iocmd == BIO_READ) ? "pagein" : "pageout"), 1465 (long)bp->b_blkno, 1466 (long)bp->b_bcount, 1467 bp->b_error 1468 ); 1469 } 1470 1471 /* 1472 * set object, raise to splvm(). 1473 */ 1474 if (bp->b_npages) 1475 object = bp->b_pages[0]->object; 1476 s = splvm(); 1477 1478 /* 1479 * remove the mapping for kernel virtual 1480 */ 1481 pmap_qremove((vm_offset_t)bp->b_data, bp->b_npages); 1482 1483 vm_page_lock_queues(); 1484 /* 1485 * cleanup pages. If an error occurs writing to swap, we are in 1486 * very serious trouble. If it happens to be a disk error, though, 1487 * we may be able to recover by reassigning the swap later on. So 1488 * in this case we remove the m->swapblk assignment for the page 1489 * but do not free it in the rlist. The errornous block(s) are thus 1490 * never reallocated as swap. Redirty the page and continue. 1491 */ 1492 for (i = 0; i < bp->b_npages; ++i) { 1493 vm_page_t m = bp->b_pages[i]; 1494 1495 vm_page_flag_clear(m, PG_SWAPINPROG); 1496 1497 if (bp->b_ioflags & BIO_ERROR) { 1498 /* 1499 * If an error occurs I'd love to throw the swapblk 1500 * away without freeing it back to swapspace, so it 1501 * can never be used again. But I can't from an 1502 * interrupt. 1503 */ 1504 if (bp->b_iocmd == BIO_READ) { 1505 /* 1506 * When reading, reqpage needs to stay 1507 * locked for the parent, but all other 1508 * pages can be freed. We still want to 1509 * wakeup the parent waiting on the page, 1510 * though. ( also: pg_reqpage can be -1 and 1511 * not match anything ). 1512 * 1513 * We have to wake specifically requested pages 1514 * up too because we cleared PG_SWAPINPROG and 1515 * someone may be waiting for that. 1516 * 1517 * NOTE: for reads, m->dirty will probably 1518 * be overridden by the original caller of 1519 * getpages so don't play cute tricks here. 1520 * 1521 * XXX IT IS NOT LEGAL TO FREE THE PAGE HERE 1522 * AS THIS MESSES WITH object->memq, and it is 1523 * not legal to mess with object->memq from an 1524 * interrupt. 1525 */ 1526 m->valid = 0; 1527 vm_page_flag_clear(m, PG_ZERO); 1528 if (i != bp->b_pager.pg_reqpage) 1529 vm_page_free(m); 1530 else 1531 vm_page_flash(m); 1532 /* 1533 * If i == bp->b_pager.pg_reqpage, do not wake 1534 * the page up. The caller needs to. 1535 */ 1536 } else { 1537 /* 1538 * If a write error occurs, reactivate page 1539 * so it doesn't clog the inactive list, 1540 * then finish the I/O. 1541 */ 1542 vm_page_dirty(m); 1543 vm_page_activate(m); 1544 vm_page_io_finish(m); 1545 } 1546 } else if (bp->b_iocmd == BIO_READ) { 1547 /* 1548 * For read success, clear dirty bits. Nobody should 1549 * have this page mapped but don't take any chances, 1550 * make sure the pmap modify bits are also cleared. 1551 * 1552 * NOTE: for reads, m->dirty will probably be 1553 * overridden by the original caller of getpages so 1554 * we cannot set them in order to free the underlying 1555 * swap in a low-swap situation. I don't think we'd 1556 * want to do that anyway, but it was an optimization 1557 * that existed in the old swapper for a time before 1558 * it got ripped out due to precisely this problem. 1559 * 1560 * clear PG_ZERO in page. 1561 * 1562 * If not the requested page then deactivate it. 1563 * 1564 * Note that the requested page, reqpage, is left 1565 * busied, but we still have to wake it up. The 1566 * other pages are released (unbusied) by 1567 * vm_page_wakeup(). We do not set reqpage's 1568 * valid bits here, it is up to the caller. 1569 */ 1570 pmap_clear_modify(m); 1571 m->valid = VM_PAGE_BITS_ALL; 1572 vm_page_undirty(m); 1573 vm_page_flag_clear(m, PG_ZERO); 1574 1575 /* 1576 * We have to wake specifically requested pages 1577 * up too because we cleared PG_SWAPINPROG and 1578 * could be waiting for it in getpages. However, 1579 * be sure to not unbusy getpages specifically 1580 * requested page - getpages expects it to be 1581 * left busy. 1582 */ 1583 if (i != bp->b_pager.pg_reqpage) { 1584 vm_page_deactivate(m); 1585 vm_page_wakeup(m); 1586 } else { 1587 vm_page_flash(m); 1588 } 1589 } else { 1590 /* 1591 * For write success, clear the modify and dirty 1592 * status, then finish the I/O ( which decrements the 1593 * busy count and possibly wakes waiter's up ). 1594 */ 1595 pmap_clear_modify(m); 1596 vm_page_undirty(m); 1597 vm_page_io_finish(m); 1598 if (!vm_page_count_severe() || !vm_page_try_to_cache(m)) 1599 vm_page_protect(m, VM_PROT_READ); 1600 } 1601 } 1602 vm_page_unlock_queues(); 1603 1604 /* 1605 * adjust pip. NOTE: the original parent may still have its own 1606 * pip refs on the object. 1607 */ 1608 if (object) 1609 vm_object_pip_wakeupn(object, bp->b_npages); 1610 1611 /* 1612 * release the physical I/O buffer 1613 */ 1614 relpbuf( 1615 bp, 1616 ((bp->b_iocmd == BIO_READ) ? &nsw_rcount : 1617 ((bp->b_flags & B_ASYNC) ? 1618 &nsw_wcount_async : 1619 &nsw_wcount_sync 1620 ) 1621 ) 1622 ); 1623 splx(s); 1624 } 1625 1626 /************************************************************************ 1627 * SWAP META DATA * 1628 ************************************************************************ 1629 * 1630 * These routines manipulate the swap metadata stored in the 1631 * OBJT_SWAP object. All swp_*() routines must be called at 1632 * splvm() because swap can be freed up by the low level vm_page 1633 * code which might be called from interrupts beyond what splbio() covers. 1634 * 1635 * Swap metadata is implemented with a global hash and not directly 1636 * linked into the object. Instead the object simply contains 1637 * appropriate tracking counters. 1638 */ 1639 1640 /* 1641 * SWP_PAGER_HASH() - hash swap meta data 1642 * 1643 * This is an inline helper function which hashes the swapblk given 1644 * the object and page index. It returns a pointer to a pointer 1645 * to the object, or a pointer to a NULL pointer if it could not 1646 * find a swapblk. 1647 * 1648 * This routine must be called at splvm(). 1649 */ 1650 static __inline struct swblock ** 1651 swp_pager_hash(vm_object_t object, vm_pindex_t index) 1652 { 1653 struct swblock **pswap; 1654 struct swblock *swap; 1655 1656 index &= ~(vm_pindex_t)SWAP_META_MASK; 1657 pswap = &swhash[(index ^ (int)(intptr_t)object) & swhash_mask]; 1658 while ((swap = *pswap) != NULL) { 1659 if (swap->swb_object == object && 1660 swap->swb_index == index 1661 ) { 1662 break; 1663 } 1664 pswap = &swap->swb_hnext; 1665 } 1666 return (pswap); 1667 } 1668 1669 /* 1670 * SWP_PAGER_META_BUILD() - add swap block to swap meta data for object 1671 * 1672 * We first convert the object to a swap object if it is a default 1673 * object. 1674 * 1675 * The specified swapblk is added to the object's swap metadata. If 1676 * the swapblk is not valid, it is freed instead. Any previously 1677 * assigned swapblk is freed. 1678 * 1679 * This routine must be called at splvm(), except when used to convert 1680 * an OBJT_DEFAULT object into an OBJT_SWAP object. 1681 */ 1682 static void 1683 swp_pager_meta_build( 1684 vm_object_t object, 1685 vm_pindex_t pindex, 1686 daddr_t swapblk 1687 ) { 1688 struct swblock *swap; 1689 struct swblock **pswap; 1690 int idx; 1691 1692 GIANT_REQUIRED; 1693 /* 1694 * Convert default object to swap object if necessary 1695 */ 1696 if (object->type != OBJT_SWAP) { 1697 object->type = OBJT_SWAP; 1698 object->un_pager.swp.swp_bcount = 0; 1699 1700 mtx_lock(&sw_alloc_mtx); 1701 if (object->handle != NULL) { 1702 TAILQ_INSERT_TAIL( 1703 NOBJLIST(object->handle), 1704 object, 1705 pager_object_list 1706 ); 1707 } else { 1708 TAILQ_INSERT_TAIL( 1709 &swap_pager_un_object_list, 1710 object, 1711 pager_object_list 1712 ); 1713 } 1714 mtx_unlock(&sw_alloc_mtx); 1715 } 1716 1717 /* 1718 * Locate hash entry. If not found create, but if we aren't adding 1719 * anything just return. If we run out of space in the map we wait 1720 * and, since the hash table may have changed, retry. 1721 */ 1722 retry: 1723 pswap = swp_pager_hash(object, pindex); 1724 1725 if ((swap = *pswap) == NULL) { 1726 int i; 1727 1728 if (swapblk == SWAPBLK_NONE) 1729 return; 1730 1731 swap = *pswap = uma_zalloc(swap_zone, M_NOWAIT); 1732 if (swap == NULL) { 1733 VM_WAIT; 1734 goto retry; 1735 } 1736 1737 swap->swb_hnext = NULL; 1738 swap->swb_object = object; 1739 swap->swb_index = pindex & ~(vm_pindex_t)SWAP_META_MASK; 1740 swap->swb_count = 0; 1741 1742 ++object->un_pager.swp.swp_bcount; 1743 1744 for (i = 0; i < SWAP_META_PAGES; ++i) 1745 swap->swb_pages[i] = SWAPBLK_NONE; 1746 } 1747 1748 /* 1749 * Delete prior contents of metadata 1750 */ 1751 idx = pindex & SWAP_META_MASK; 1752 1753 if (swap->swb_pages[idx] != SWAPBLK_NONE) { 1754 swp_pager_freeswapspace(swap->swb_pages[idx], 1); 1755 --swap->swb_count; 1756 } 1757 1758 /* 1759 * Enter block into metadata 1760 */ 1761 swap->swb_pages[idx] = swapblk; 1762 if (swapblk != SWAPBLK_NONE) 1763 ++swap->swb_count; 1764 } 1765 1766 /* 1767 * SWP_PAGER_META_FREE() - free a range of blocks in the object's swap metadata 1768 * 1769 * The requested range of blocks is freed, with any associated swap 1770 * returned to the swap bitmap. 1771 * 1772 * This routine will free swap metadata structures as they are cleaned 1773 * out. This routine does *NOT* operate on swap metadata associated 1774 * with resident pages. 1775 * 1776 * This routine must be called at splvm() 1777 */ 1778 static void 1779 swp_pager_meta_free(vm_object_t object, vm_pindex_t index, daddr_t count) 1780 { 1781 GIANT_REQUIRED; 1782 1783 if (object->type != OBJT_SWAP) 1784 return; 1785 1786 while (count > 0) { 1787 struct swblock **pswap; 1788 struct swblock *swap; 1789 1790 pswap = swp_pager_hash(object, index); 1791 1792 if ((swap = *pswap) != NULL) { 1793 daddr_t v = swap->swb_pages[index & SWAP_META_MASK]; 1794 1795 if (v != SWAPBLK_NONE) { 1796 swp_pager_freeswapspace(v, 1); 1797 swap->swb_pages[index & SWAP_META_MASK] = 1798 SWAPBLK_NONE; 1799 if (--swap->swb_count == 0) { 1800 *pswap = swap->swb_hnext; 1801 uma_zfree(swap_zone, swap); 1802 --object->un_pager.swp.swp_bcount; 1803 } 1804 } 1805 --count; 1806 ++index; 1807 } else { 1808 int n = SWAP_META_PAGES - (index & SWAP_META_MASK); 1809 count -= n; 1810 index += n; 1811 } 1812 } 1813 } 1814 1815 /* 1816 * SWP_PAGER_META_FREE_ALL() - destroy all swap metadata associated with object 1817 * 1818 * This routine locates and destroys all swap metadata associated with 1819 * an object. 1820 * 1821 * This routine must be called at splvm() 1822 */ 1823 static void 1824 swp_pager_meta_free_all(vm_object_t object) 1825 { 1826 daddr_t index = 0; 1827 1828 GIANT_REQUIRED; 1829 1830 if (object->type != OBJT_SWAP) 1831 return; 1832 1833 while (object->un_pager.swp.swp_bcount) { 1834 struct swblock **pswap; 1835 struct swblock *swap; 1836 1837 pswap = swp_pager_hash(object, index); 1838 if ((swap = *pswap) != NULL) { 1839 int i; 1840 1841 for (i = 0; i < SWAP_META_PAGES; ++i) { 1842 daddr_t v = swap->swb_pages[i]; 1843 if (v != SWAPBLK_NONE) { 1844 --swap->swb_count; 1845 swp_pager_freeswapspace(v, 1); 1846 } 1847 } 1848 if (swap->swb_count != 0) 1849 panic("swap_pager_meta_free_all: swb_count != 0"); 1850 *pswap = swap->swb_hnext; 1851 uma_zfree(swap_zone, swap); 1852 --object->un_pager.swp.swp_bcount; 1853 } 1854 index += SWAP_META_PAGES; 1855 if (index > 0x20000000) 1856 panic("swp_pager_meta_free_all: failed to locate all swap meta blocks"); 1857 } 1858 } 1859 1860 /* 1861 * SWP_PAGER_METACTL() - misc control of swap and vm_page_t meta data. 1862 * 1863 * This routine is capable of looking up, popping, or freeing 1864 * swapblk assignments in the swap meta data or in the vm_page_t. 1865 * The routine typically returns the swapblk being looked-up, or popped, 1866 * or SWAPBLK_NONE if the block was freed, or SWAPBLK_NONE if the block 1867 * was invalid. This routine will automatically free any invalid 1868 * meta-data swapblks. 1869 * 1870 * It is not possible to store invalid swapblks in the swap meta data 1871 * (other then a literal 'SWAPBLK_NONE'), so we don't bother checking. 1872 * 1873 * When acting on a busy resident page and paging is in progress, we 1874 * have to wait until paging is complete but otherwise can act on the 1875 * busy page. 1876 * 1877 * This routine must be called at splvm(). 1878 * 1879 * SWM_FREE remove and free swap block from metadata 1880 * SWM_POP remove from meta data but do not free.. pop it out 1881 */ 1882 static daddr_t 1883 swp_pager_meta_ctl( 1884 vm_object_t object, 1885 vm_pindex_t pindex, 1886 int flags 1887 ) { 1888 struct swblock **pswap; 1889 struct swblock *swap; 1890 daddr_t r1; 1891 int idx; 1892 1893 GIANT_REQUIRED; 1894 /* 1895 * The meta data only exists of the object is OBJT_SWAP 1896 * and even then might not be allocated yet. 1897 */ 1898 if (object->type != OBJT_SWAP) 1899 return (SWAPBLK_NONE); 1900 1901 r1 = SWAPBLK_NONE; 1902 pswap = swp_pager_hash(object, pindex); 1903 1904 if ((swap = *pswap) != NULL) { 1905 idx = pindex & SWAP_META_MASK; 1906 r1 = swap->swb_pages[idx]; 1907 1908 if (r1 != SWAPBLK_NONE) { 1909 if (flags & SWM_FREE) { 1910 swp_pager_freeswapspace(r1, 1); 1911 r1 = SWAPBLK_NONE; 1912 } 1913 if (flags & (SWM_FREE|SWM_POP)) { 1914 swap->swb_pages[idx] = SWAPBLK_NONE; 1915 if (--swap->swb_count == 0) { 1916 *pswap = swap->swb_hnext; 1917 uma_zfree(swap_zone, swap); 1918 --object->un_pager.swp.swp_bcount; 1919 } 1920 } 1921 } 1922 } 1923 return (r1); 1924 } 1925 1926 /******************************************************** 1927 * CHAINING FUNCTIONS * 1928 ******************************************************** 1929 * 1930 * These functions support recursion of I/O operations 1931 * on bp's, typically by chaining one or more 'child' bp's 1932 * to the parent. Synchronous, asynchronous, and semi-synchronous 1933 * chaining is possible. 1934 */ 1935 1936 /* 1937 * vm_pager_chain_iodone: 1938 * 1939 * io completion routine for child bp. Currently we fudge a bit 1940 * on dealing with b_resid. Since users of these routines may issue 1941 * multiple children simultaneously, sequencing of the error can be lost. 1942 */ 1943 static void 1944 vm_pager_chain_iodone(struct buf *nbp) 1945 { 1946 struct bio *bp; 1947 u_int *count; 1948 1949 bp = nbp->b_caller1; 1950 count = (u_int *)&(bp->bio_driver1); 1951 if (bp != NULL) { 1952 if (nbp->b_ioflags & BIO_ERROR) { 1953 bp->bio_flags |= BIO_ERROR; 1954 bp->bio_error = nbp->b_error; 1955 } else if (nbp->b_resid != 0) { 1956 bp->bio_flags |= BIO_ERROR; 1957 bp->bio_error = EINVAL; 1958 } else { 1959 bp->bio_resid -= nbp->b_bcount; 1960 } 1961 nbp->b_caller1 = NULL; 1962 --(*count); 1963 if (bp->bio_flags & BIO_FLAG1) { 1964 bp->bio_flags &= ~BIO_FLAG1; 1965 wakeup(bp); 1966 } 1967 } 1968 nbp->b_flags |= B_DONE; 1969 nbp->b_flags &= ~B_ASYNC; 1970 relpbuf(nbp, NULL); 1971 } 1972 1973 /* 1974 * getchainbuf: 1975 * 1976 * Obtain a physical buffer and chain it to its parent buffer. When 1977 * I/O completes, the parent buffer will be B_SIGNAL'd. Errors are 1978 * automatically propagated to the parent 1979 */ 1980 struct buf * 1981 getchainbuf(struct bio *bp, struct vnode *vp, int flags) 1982 { 1983 struct buf *nbp; 1984 u_int *count; 1985 1986 GIANT_REQUIRED; 1987 nbp = getpbuf(NULL); 1988 count = (u_int *)&(bp->bio_driver1); 1989 1990 nbp->b_caller1 = bp; 1991 ++(*count); 1992 1993 if (*count > 4) 1994 waitchainbuf(bp, 4, 0); 1995 1996 nbp->b_iocmd = bp->bio_cmd; 1997 nbp->b_ioflags = 0; 1998 nbp->b_flags = flags; 1999 nbp->b_rcred = crhold(thread0.td_ucred); 2000 nbp->b_wcred = crhold(thread0.td_ucred); 2001 nbp->b_iodone = vm_pager_chain_iodone; 2002 2003 if (vp) 2004 pbgetvp(vp, nbp); 2005 return (nbp); 2006 } 2007 2008 void 2009 flushchainbuf(struct buf *nbp) 2010 { 2011 GIANT_REQUIRED; 2012 if (nbp->b_bcount) { 2013 nbp->b_bufsize = nbp->b_bcount; 2014 if (nbp->b_iocmd == BIO_WRITE) 2015 nbp->b_dirtyend = nbp->b_bcount; 2016 BUF_KERNPROC(nbp); 2017 BUF_STRATEGY(nbp); 2018 } else { 2019 bufdone(nbp); 2020 } 2021 } 2022 2023 static void 2024 waitchainbuf(struct bio *bp, int limit, int done) 2025 { 2026 int s; 2027 u_int *count; 2028 2029 GIANT_REQUIRED; 2030 count = (u_int *)&(bp->bio_driver1); 2031 s = splbio(); 2032 while (*count > limit) { 2033 bp->bio_flags |= BIO_FLAG1; 2034 tsleep(bp, PRIBIO + 4, "bpchain", 0); 2035 } 2036 if (done) { 2037 if (bp->bio_resid != 0 && !(bp->bio_flags & BIO_ERROR)) { 2038 bp->bio_flags |= BIO_ERROR; 2039 bp->bio_error = EINVAL; 2040 } 2041 biodone(bp); 2042 } 2043 splx(s); 2044 } 2045 2046