1 /* 2 * soundcard.h 3 * 4 * Copyright by Hannu Savolainen 1993 5 * Modified for the new FreeBSD sound driver by Luigi Rizzo, 1997 6 * 7 * Redistribution and use in source and binary forms, with or without 8 * modification, are permitted provided that the following conditions 9 * are met: 10 * 1. Redistributions of source code must retain the above copyright 11 * notice, this list of conditions and the following disclaimer. 12 * 2. Redistributions in binary form must reproduce the above 13 * copyright notice, this list of conditions and the following 14 * disclaimer in the documentation and/or other materials provided 15 * with the distribution. 16 * 17 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' 18 * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED 19 * TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A 20 * PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR 21 * OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, 22 * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT 23 * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF 24 * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED 25 * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT 26 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN 27 * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE 28 * POSSIBILITY OF SUCH DAMAGE. 29 * 30 * $FreeBSD$ 31 */ 32 33 #ifndef _SYS_SOUNDCARD_H_ 34 #define _SYS_SOUNDCARD_H_ 35 /* 36 * If you make modifications to this file, please contact me before 37 * distributing the modified version. There is already enough 38 * diversity in the world. 39 * 40 * Regards, 41 * Hannu Savolainen 42 * hannu@voxware.pp.fi 43 * 44 ********************************************************************** 45 * PS. The Hacker's Guide to VoxWare available from 46 * nic.funet.fi:pub/Linux/ALPHA/sound. The file is 47 * snd-sdk-doc-0.1.ps.gz (gzipped postscript). It contains 48 * some useful information about programming with VoxWare. 49 * (NOTE! The pub/Linux/ALPHA/ directories are hidden. You have 50 * to cd inside them before the files are accessible.) 51 ********************************************************************** 52 */ 53 54 /* 55 * SOUND_VERSION is only used by the voxware driver. Hopefully apps 56 * should not depend on it, but rather look at the capabilities 57 * of the driver in the kernel! 58 */ 59 #define SOUND_VERSION 301 60 #define VOXWARE /* does this have any use ? */ 61 62 /* 63 * Supported card ID numbers (Should be somewhere else? We keep 64 * them here just for compativility with the old driver, but these 65 * constants are of little or no use). 66 */ 67 68 #define SNDCARD_ADLIB 1 69 #define SNDCARD_SB 2 70 #define SNDCARD_PAS 3 71 #define SNDCARD_GUS 4 72 #define SNDCARD_MPU401 5 73 #define SNDCARD_SB16 6 74 #define SNDCARD_SB16MIDI 7 75 #define SNDCARD_UART6850 8 76 #define SNDCARD_GUS16 9 77 #define SNDCARD_MSS 10 78 #define SNDCARD_PSS 11 79 #define SNDCARD_SSCAPE 12 80 #define SNDCARD_PSS_MPU 13 81 #define SNDCARD_PSS_MSS 14 82 #define SNDCARD_SSCAPE_MSS 15 83 #define SNDCARD_TRXPRO 16 84 #define SNDCARD_TRXPRO_SB 17 85 #define SNDCARD_TRXPRO_MPU 18 86 #define SNDCARD_MAD16 19 87 #define SNDCARD_MAD16_MPU 20 88 #define SNDCARD_CS4232 21 89 #define SNDCARD_CS4232_MPU 22 90 #define SNDCARD_MAUI 23 91 #define SNDCARD_PSEUDO_MSS 24 92 #define SNDCARD_AWE32 25 93 #define SNDCARD_NSS 26 94 #define SNDCARD_UART16550 27 95 #define SNDCARD_OPL 28 96 97 #include <sys/types.h> 98 #include <machine/endian.h> 99 #ifndef _IOWR 100 #include <sys/ioccom.h> 101 #endif /* !_IOWR */ 102 103 /* 104 * The first part of this file contains the new FreeBSD sound ioctl 105 * interface. Tries to minimize the number of different ioctls, and 106 * to be reasonably general. 107 * 108 * 970821: some of the new calls have not been implemented yet. 109 */ 110 111 /* 112 * the following three calls extend the generic file descriptor 113 * interface. AIONWRITE is the dual of FIONREAD, i.e. returns the max 114 * number of bytes for a write operation to be non-blocking. 115 * 116 * AIOGSIZE/AIOSSIZE are used to change the behaviour of the device, 117 * from a character device (default) to a block device. In block mode, 118 * (not to be confused with blocking mode) the main difference for the 119 * application is that select() will return only when a complete 120 * block can be read/written to the device, whereas in character mode 121 * select will return true when one byte can be exchanged. For audio 122 * devices, character mode makes select almost useless since one byte 123 * will always be ready by the next sample time (which is often only a 124 * handful of microseconds away). 125 * Use a size of 0 or 1 to return to character mode. 126 */ 127 #define AIONWRITE _IOR('A', 10, int) /* get # bytes to write */ 128 struct snd_size { 129 int play_size; 130 int rec_size; 131 }; 132 #define AIOGSIZE _IOR('A', 11, struct snd_size)/* read current blocksize */ 133 #define AIOSSIZE _IOWR('A', 11, struct snd_size) /* sets blocksize */ 134 135 /* 136 * The following constants define supported audio formats. The 137 * encoding follows voxware conventions, i.e. 1 bit for each supported 138 * format. We extend it by using bit 31 (RO) to indicate full-duplex 139 * capability, and bit 29 (RO) to indicate that the card supports/ 140 * needs different formats on capture & playback channels. 141 * Bit 29 (RW) is used to indicate/ask stereo. 142 * 143 * The number of bits required to store the sample is: 144 * o 4 bits for the IDA ADPCM format, 145 * o 8 bits for 8-bit formats, mu-law and A-law, 146 * o 16 bits for the 16-bit formats, and 147 * o 32 bits for the 24/32-bit formats. 148 * o undefined for the MPEG audio format. 149 */ 150 151 #define AFMT_QUERY 0x00000000 /* Return current format */ 152 #define AFMT_MU_LAW 0x00000001 /* Logarithmic mu-law */ 153 #define AFMT_A_LAW 0x00000002 /* Logarithmic A-law */ 154 #define AFMT_IMA_ADPCM 0x00000004 /* A 4:1 compressed format where 16-bit 155 * squence represented using the 156 * the average 4 bits per sample */ 157 #define AFMT_U8 0x00000008 /* Unsigned 8-bit */ 158 #define AFMT_S16_LE 0x00000010 /* Little endian signed 16-bit */ 159 #define AFMT_S16_BE 0x00000020 /* Big endian signed 16-bit */ 160 #define AFMT_S8 0x00000040 /* Signed 8-bit */ 161 #define AFMT_U16_LE 0x00000080 /* Little endian unsigned 16-bit */ 162 #define AFMT_U16_BE 0x00000100 /* Big endian unsigned 16-bit */ 163 #define AFMT_MPEG 0x00000200 /* MPEG MP2/MP3 audio */ 164 #define AFMT_AC3 0x00000400 /* Dolby Digital AC3 */ 165 166 #if _BYTE_ORDER == _LITTLE_ENDIAN 167 #define AFMT_S16_NE AFMT_S16_LE /* native endian signed 16 */ 168 #else 169 #define AFMT_S16_NE AFMT_S16_BE 170 #endif 171 172 /* 173 * 32-bit formats below used for 24-bit audio data where the data is stored 174 * in the 24 most significant bits and the least significant bits are not used 175 * (should be set to 0). 176 */ 177 #define AFMT_S32_LE 0x00001000 /* Little endian signed 32-bit */ 178 #define AFMT_S32_BE 0x00002000 /* Big endian signed 32-bit */ 179 #define AFMT_U32_LE 0x00004000 /* Little endian unsigned 32-bit */ 180 #define AFMT_U32_BE 0x00008000 /* Big endian unsigned 32-bit */ 181 182 #define AFMT_STEREO 0x10000000 /* can do/want stereo */ 183 184 /* 185 * the following are really capabilities 186 */ 187 #define AFMT_WEIRD 0x20000000 /* weird hardware... */ 188 /* 189 * AFMT_WEIRD reports that the hardware might need to operate 190 * with different formats in the playback and capture 191 * channels when operating in full duplex. 192 * As an example, SoundBlaster16 cards only support U8 in one 193 * direction and S16 in the other one, and applications should 194 * be aware of this limitation. 195 */ 196 #define AFMT_FULLDUPLEX 0x80000000 /* can do full duplex */ 197 198 /* 199 * The following structure is used to get/set format and sampling rate. 200 * While it would be better to have things such as stereo, bits per 201 * sample, endiannes, etc split in different variables, it turns out 202 * that formats are not that many, and not all combinations are possible. 203 * So we followed the Voxware approach of associating one bit to each 204 * format. 205 */ 206 207 typedef struct _snd_chan_param { 208 u_long play_rate; /* sampling rate */ 209 u_long rec_rate; /* sampling rate */ 210 u_long play_format; /* everything describing the format */ 211 u_long rec_format; /* everything describing the format */ 212 } snd_chan_param; 213 #define AIOGFMT _IOR('f', 12, snd_chan_param) /* get format */ 214 #define AIOSFMT _IOWR('f', 12, snd_chan_param) /* sets format */ 215 216 /* 217 * The following structure is used to get/set the mixer setting. 218 * Up to 32 mixers are supported, each one with up to 32 channels. 219 */ 220 typedef struct _snd_mix_param { 221 u_char subdev; /* which output */ 222 u_char line; /* which input */ 223 u_char left,right; /* volumes, 0..255, 0 = mute */ 224 } snd_mix_param ; 225 226 /* XXX AIOGMIX, AIOSMIX not implemented yet */ 227 #define AIOGMIX _IOWR('A', 13, snd_mix_param) /* return mixer status */ 228 #define AIOSMIX _IOWR('A', 14, snd_mix_param) /* sets mixer status */ 229 230 /* 231 * channel specifiers used in AIOSTOP and AIOSYNC 232 */ 233 #define AIOSYNC_PLAY 0x1 /* play chan */ 234 #define AIOSYNC_CAPTURE 0x2 /* capture chan */ 235 /* AIOSTOP stop & flush a channel, returns the residual count */ 236 #define AIOSTOP _IOWR ('A', 15, int) 237 238 /* alternate method used to notify the sync condition */ 239 #define AIOSYNC_SIGNAL 0x100 240 #define AIOSYNC_SELECT 0x200 241 242 /* what the 'pos' field refers to */ 243 #define AIOSYNC_READY 0x400 244 #define AIOSYNC_FREE 0x800 245 246 typedef struct _snd_sync_parm { 247 long chan ; /* play or capture channel, plus modifier */ 248 long pos; 249 } snd_sync_parm; 250 #define AIOSYNC _IOWR ('A', 15, snd_sync_parm) /* misc. synchronization */ 251 252 /* 253 * The following is used to return device capabilities. If the structure 254 * passed to the ioctl is zeroed, default values are returned for rate 255 * and formats, a bitmap of available mixers is returned, and values 256 * (inputs, different levels) for the first one are returned. 257 * 258 * If formats, mixers, inputs are instantiated, then detailed info 259 * are returned depending on the call. 260 */ 261 typedef struct _snd_capabilities { 262 u_long rate_min, rate_max; /* min-max sampling rate */ 263 u_long formats; 264 u_long bufsize; /* DMA buffer size */ 265 u_long mixers; /* bitmap of available mixers */ 266 u_long inputs; /* bitmap of available inputs (per mixer) */ 267 u_short left, right; /* how many levels are supported */ 268 } snd_capabilities; 269 #define AIOGCAP _IOWR('A', 15, snd_capabilities) /* get capabilities */ 270 271 /* 272 * here is the old (Voxware) ioctl interface 273 */ 274 275 /* 276 * IOCTL Commands for /dev/sequencer 277 */ 278 279 #define SNDCTL_SEQ_RESET _IO ('Q', 0) 280 #define SNDCTL_SEQ_SYNC _IO ('Q', 1) 281 #define SNDCTL_SYNTH_INFO _IOWR('Q', 2, struct synth_info) 282 #define SNDCTL_SEQ_CTRLRATE _IOWR('Q', 3, int) /* Set/get timer res.(hz) */ 283 #define SNDCTL_SEQ_GETOUTCOUNT _IOR ('Q', 4, int) 284 #define SNDCTL_SEQ_GETINCOUNT _IOR ('Q', 5, int) 285 #define SNDCTL_SEQ_PERCMODE _IOW ('Q', 6, int) 286 #define SNDCTL_FM_LOAD_INSTR _IOW ('Q', 7, struct sbi_instrument) /* Valid for FM only */ 287 #define SNDCTL_SEQ_TESTMIDI _IOW ('Q', 8, int) 288 #define SNDCTL_SEQ_RESETSAMPLES _IOW ('Q', 9, int) 289 #define SNDCTL_SEQ_NRSYNTHS _IOR ('Q',10, int) 290 #define SNDCTL_SEQ_NRMIDIS _IOR ('Q',11, int) 291 #define SNDCTL_MIDI_INFO _IOWR('Q',12, struct midi_info) 292 #define SNDCTL_SEQ_THRESHOLD _IOW ('Q',13, int) 293 #define SNDCTL_SEQ_TRESHOLD SNDCTL_SEQ_THRESHOLD /* there was once a typo */ 294 #define SNDCTL_SYNTH_MEMAVL _IOWR('Q',14, int) /* in=dev#, out=memsize */ 295 #define SNDCTL_FM_4OP_ENABLE _IOW ('Q',15, int) /* in=dev# */ 296 #define SNDCTL_PMGR_ACCESS _IOWR('Q',16, struct patmgr_info) 297 #define SNDCTL_SEQ_PANIC _IO ('Q',17) 298 #define SNDCTL_SEQ_OUTOFBAND _IOW ('Q',18, struct seq_event_rec) 299 #define SNDCTL_SEQ_GETTIME _IOR ('Q',19, int) 300 301 struct seq_event_rec { 302 u_char arr[8]; 303 }; 304 305 #define SNDCTL_TMR_TIMEBASE _IOWR('T', 1, int) 306 #define SNDCTL_TMR_START _IO ('T', 2) 307 #define SNDCTL_TMR_STOP _IO ('T', 3) 308 #define SNDCTL_TMR_CONTINUE _IO ('T', 4) 309 #define SNDCTL_TMR_TEMPO _IOWR('T', 5, int) 310 #define SNDCTL_TMR_SOURCE _IOWR('T', 6, int) 311 # define TMR_INTERNAL 0x00000001 312 # define TMR_EXTERNAL 0x00000002 313 # define TMR_MODE_MIDI 0x00000010 314 # define TMR_MODE_FSK 0x00000020 315 # define TMR_MODE_CLS 0x00000040 316 # define TMR_MODE_SMPTE 0x00000080 317 #define SNDCTL_TMR_METRONOME _IOW ('T', 7, int) 318 #define SNDCTL_TMR_SELECT _IOW ('T', 8, int) 319 320 /* 321 * Endian aware patch key generation algorithm. 322 */ 323 324 #if defined(_AIX) || defined(AIX) 325 # define _PATCHKEY(id) (0xfd00|id) 326 #else 327 # define _PATCHKEY(id) ((id<<8)|0xfd) 328 #endif 329 330 /* 331 * Sample loading mechanism for internal synthesizers (/dev/sequencer) 332 * The following patch_info structure has been designed to support 333 * Gravis UltraSound. It tries to be universal format for uploading 334 * sample based patches but is probably too limited. 335 */ 336 337 struct patch_info { 338 /* u_short key; Use GUS_PATCH here */ 339 short key; /* Use GUS_PATCH here */ 340 #define GUS_PATCH _PATCHKEY(0x04) 341 #define OBSOLETE_GUS_PATCH _PATCHKEY(0x02) 342 343 short device_no; /* Synthesizer number */ 344 short instr_no; /* Midi pgm# */ 345 346 u_long mode; 347 /* 348 * The least significant byte has the same format than the GUS .PAT 349 * files 350 */ 351 #define WAVE_16_BITS 0x01 /* bit 0 = 8 or 16 bit wave data. */ 352 #define WAVE_UNSIGNED 0x02 /* bit 1 = Signed - Unsigned data. */ 353 #define WAVE_LOOPING 0x04 /* bit 2 = looping enabled-1. */ 354 #define WAVE_BIDIR_LOOP 0x08 /* bit 3 = Set is bidirectional looping. */ 355 #define WAVE_LOOP_BACK 0x10 /* bit 4 = Set is looping backward. */ 356 #define WAVE_SUSTAIN_ON 0x20 /* bit 5 = Turn sustaining on. (Env. pts. 3)*/ 357 #define WAVE_ENVELOPES 0x40 /* bit 6 = Enable envelopes - 1 */ 358 /* (use the env_rate/env_offs fields). */ 359 /* Linux specific bits */ 360 #define WAVE_VIBRATO 0x00010000 /* The vibrato info is valid */ 361 #define WAVE_TREMOLO 0x00020000 /* The tremolo info is valid */ 362 #define WAVE_SCALE 0x00040000 /* The scaling info is valid */ 363 /* Other bits must be zeroed */ 364 365 long len; /* Size of the wave data in bytes */ 366 long loop_start, loop_end; /* Byte offsets from the beginning */ 367 368 /* 369 * The base_freq and base_note fields are used when computing the 370 * playback speed for a note. The base_note defines the tone frequency 371 * which is heard if the sample is played using the base_freq as the 372 * playback speed. 373 * 374 * The low_note and high_note fields define the minimum and maximum note 375 * frequencies for which this sample is valid. It is possible to define 376 * more than one samples for an instrument number at the same time. The 377 * low_note and high_note fields are used to select the most suitable one. 378 * 379 * The fields base_note, high_note and low_note should contain 380 * the note frequency multiplied by 1000. For example value for the 381 * middle A is 440*1000. 382 */ 383 384 u_int base_freq; 385 u_long base_note; 386 u_long high_note; 387 u_long low_note; 388 int panning; /* -128=left, 127=right */ 389 int detuning; 390 391 /* New fields introduced in version 1.99.5 */ 392 393 /* Envelope. Enabled by mode bit WAVE_ENVELOPES */ 394 u_char env_rate[ 6 ]; /* GUS HW ramping rate */ 395 u_char env_offset[ 6 ]; /* 255 == 100% */ 396 397 /* 398 * The tremolo, vibrato and scale info are not supported yet. 399 * Enable by setting the mode bits WAVE_TREMOLO, WAVE_VIBRATO or 400 * WAVE_SCALE 401 */ 402 403 u_char tremolo_sweep; 404 u_char tremolo_rate; 405 u_char tremolo_depth; 406 407 u_char vibrato_sweep; 408 u_char vibrato_rate; 409 u_char vibrato_depth; 410 411 int scale_frequency; 412 u_int scale_factor; /* from 0 to 2048 or 0 to 2 */ 413 414 int volume; 415 int spare[4]; 416 char data[1]; /* The waveform data starts here */ 417 }; 418 419 struct sysex_info { 420 short key; /* Use GUS_PATCH here */ 421 #define SYSEX_PATCH _PATCHKEY(0x05) 422 #define MAUI_PATCH _PATCHKEY(0x06) 423 short device_no; /* Synthesizer number */ 424 long len; /* Size of the sysex data in bytes */ 425 u_char data[1]; /* Sysex data starts here */ 426 }; 427 428 /* 429 * Patch management interface (/dev/sequencer, /dev/patmgr#) 430 * Don't use these calls if you want to maintain compatibility with 431 * the future versions of the driver. 432 */ 433 434 #define PS_NO_PATCHES 0 /* No patch support on device */ 435 #define PS_MGR_NOT_OK 1 /* Plain patch support (no mgr) */ 436 #define PS_MGR_OK 2 /* Patch manager supported */ 437 #define PS_MANAGED 3 /* Patch manager running */ 438 439 #define SNDCTL_PMGR_IFACE _IOWR('P', 1, struct patmgr_info) 440 441 /* 442 * The patmgr_info is a fixed size structure which is used for two 443 * different purposes. The intended use is for communication between 444 * the application using /dev/sequencer and the patch manager daemon 445 * associated with a synthesizer device (ioctl(SNDCTL_PMGR_ACCESS)). 446 * 447 * This structure is also used with ioctl(SNDCTL_PGMR_IFACE) which allows 448 * a patch manager daemon to read and write device parameters. This 449 * ioctl available through /dev/sequencer also. Avoid using it since it's 450 * extremely hardware dependent. In addition access trough /dev/sequencer 451 * may confuse the patch manager daemon. 452 */ 453 454 struct patmgr_info { /* Note! size must be < 4k since kmalloc() is used */ 455 u_long key; /* Don't worry. Reserved for communication 456 between the patch manager and the driver. */ 457 #define PM_K_EVENT 1 /* Event from the /dev/sequencer driver */ 458 #define PM_K_COMMAND 2 /* Request from an application */ 459 #define PM_K_RESPONSE 3 /* From patmgr to application */ 460 #define PM_ERROR 4 /* Error returned by the patmgr */ 461 int device; 462 int command; 463 464 /* 465 * Commands 0x000 to 0xfff reserved for patch manager programs 466 */ 467 #define PM_GET_DEVTYPE 1 /* Returns type of the patch mgr interface of dev */ 468 #define PMTYPE_FM2 1 /* 2 OP fm */ 469 #define PMTYPE_FM4 2 /* Mixed 4 or 2 op FM (OPL-3) */ 470 #define PMTYPE_WAVE 3 /* Wave table synthesizer (GUS) */ 471 #define PM_GET_NRPGM 2 /* Returns max # of midi programs in parm1 */ 472 #define PM_GET_PGMMAP 3 /* Returns map of loaded midi programs in data8 */ 473 #define PM_GET_PGM_PATCHES 4 /* Return list of patches of a program (parm1) */ 474 #define PM_GET_PATCH 5 /* Return patch header of patch parm1 */ 475 #define PM_SET_PATCH 6 /* Set patch header of patch parm1 */ 476 #define PM_READ_PATCH 7 /* Read patch (wave) data */ 477 #define PM_WRITE_PATCH 8 /* Write patch (wave) data */ 478 479 /* 480 * Commands 0x1000 to 0xffff are for communication between the patch manager 481 * and the client 482 */ 483 #define _PM_LOAD_PATCH 0x100 484 485 /* 486 * Commands above 0xffff reserved for device specific use 487 */ 488 489 long parm1; 490 long parm2; 491 long parm3; 492 493 union { 494 u_char data8[4000]; 495 u_short data16[2000]; 496 u_long data32[1000]; 497 struct patch_info patch; 498 } data; 499 }; 500 501 /* 502 * When a patch manager daemon is present, it will be informed by the 503 * driver when something important happens. For example when the 504 * /dev/sequencer is opened or closed. A record with key == PM_K_EVENT is 505 * returned. The command field contains the event type: 506 */ 507 #define PM_E_OPENED 1 /* /dev/sequencer opened */ 508 #define PM_E_CLOSED 2 /* /dev/sequencer closed */ 509 #define PM_E_PATCH_RESET 3 /* SNDCTL_RESETSAMPLES called */ 510 #define PM_E_PATCH_LOADED 4 /* A patch has been loaded by appl */ 511 512 /* 513 * /dev/sequencer input events. 514 * 515 * The data written to the /dev/sequencer is a stream of events. Events 516 * are records of 4 or 8 bytes. The first byte defines the size. 517 * Any number of events can be written with a write call. There 518 * is a set of macros for sending these events. Use these macros if you 519 * want to maximize portability of your program. 520 * 521 * Events SEQ_WAIT, SEQ_MIDIPUTC and SEQ_ECHO. Are also input events. 522 * (All input events are currently 4 bytes long. Be prepared to support 523 * 8 byte events also. If you receive any event having first byte >= 128, 524 * it's a 8 byte event. 525 * 526 * The events are documented at the end of this file. 527 * 528 * Normal events (4 bytes) 529 * There is also a 8 byte version of most of the 4 byte events. The 530 * 8 byte one is recommended. 531 */ 532 #define SEQ_NOTEOFF 0 533 #define SEQ_FMNOTEOFF SEQ_NOTEOFF /* Just old name */ 534 #define SEQ_NOTEON 1 535 #define SEQ_FMNOTEON SEQ_NOTEON 536 #define SEQ_WAIT TMR_WAIT_ABS 537 #define SEQ_PGMCHANGE 3 538 #define SEQ_FMPGMCHANGE SEQ_PGMCHANGE 539 #define SEQ_SYNCTIMER TMR_START 540 #define SEQ_MIDIPUTC 5 541 #define SEQ_DRUMON 6 /*** OBSOLETE ***/ 542 #define SEQ_DRUMOFF 7 /*** OBSOLETE ***/ 543 #define SEQ_ECHO TMR_ECHO /* For synching programs with output */ 544 #define SEQ_AFTERTOUCH 9 545 #define SEQ_CONTROLLER 10 546 547 /* 548 * Midi controller numbers 549 * 550 * Controllers 0 to 31 (0x00 to 0x1f) and 32 to 63 (0x20 to 0x3f) 551 * are continuous controllers. 552 * In the MIDI 1.0 these controllers are sent using two messages. 553 * Controller numbers 0 to 31 are used to send the MSB and the 554 * controller numbers 32 to 63 are for the LSB. Note that just 7 bits 555 * are used in MIDI bytes. 556 */ 557 558 #define CTL_BANK_SELECT 0x00 559 #define CTL_MODWHEEL 0x01 560 #define CTL_BREATH 0x02 561 /* undefined 0x03 */ 562 #define CTL_FOOT 0x04 563 #define CTL_PORTAMENTO_TIME 0x05 564 #define CTL_DATA_ENTRY 0x06 565 #define CTL_MAIN_VOLUME 0x07 566 #define CTL_BALANCE 0x08 567 /* undefined 0x09 */ 568 #define CTL_PAN 0x0a 569 #define CTL_EXPRESSION 0x0b 570 /* undefined 0x0c - 0x0f */ 571 #define CTL_GENERAL_PURPOSE1 0x10 572 #define CTL_GENERAL_PURPOSE2 0x11 573 #define CTL_GENERAL_PURPOSE3 0x12 574 #define CTL_GENERAL_PURPOSE4 0x13 575 /* undefined 0x14 - 0x1f */ 576 577 /* undefined 0x20 */ 578 579 /* 580 * The controller numbers 0x21 to 0x3f are reserved for the 581 * least significant bytes of the controllers 0x00 to 0x1f. 582 * These controllers are not recognised by the driver. 583 * 584 * Controllers 64 to 69 (0x40 to 0x45) are on/off switches. 585 * 0=OFF and 127=ON (intermediate values are possible) 586 */ 587 #define CTL_DAMPER_PEDAL 0x40 588 #define CTL_SUSTAIN CTL_DAMPER_PEDAL /* Alias */ 589 #define CTL_HOLD CTL_DAMPER_PEDAL /* Alias */ 590 #define CTL_PORTAMENTO 0x41 591 #define CTL_SOSTENUTO 0x42 592 #define CTL_SOFT_PEDAL 0x43 593 /* undefined 0x44 */ 594 #define CTL_HOLD2 0x45 595 /* undefined 0x46 - 0x4f */ 596 597 #define CTL_GENERAL_PURPOSE5 0x50 598 #define CTL_GENERAL_PURPOSE6 0x51 599 #define CTL_GENERAL_PURPOSE7 0x52 600 #define CTL_GENERAL_PURPOSE8 0x53 601 /* undefined 0x54 - 0x5a */ 602 #define CTL_EXT_EFF_DEPTH 0x5b 603 #define CTL_TREMOLO_DEPTH 0x5c 604 #define CTL_CHORUS_DEPTH 0x5d 605 #define CTL_DETUNE_DEPTH 0x5e 606 #define CTL_CELESTE_DEPTH CTL_DETUNE_DEPTH /* Alias for the above one */ 607 #define CTL_PHASER_DEPTH 0x5f 608 #define CTL_DATA_INCREMENT 0x60 609 #define CTL_DATA_DECREMENT 0x61 610 #define CTL_NONREG_PARM_NUM_LSB 0x62 611 #define CTL_NONREG_PARM_NUM_MSB 0x63 612 #define CTL_REGIST_PARM_NUM_LSB 0x64 613 #define CTL_REGIST_PARM_NUM_MSB 0x65 614 /* undefined 0x66 - 0x78 */ 615 /* reserved 0x79 - 0x7f */ 616 617 /* Pseudo controllers (not midi compatible) */ 618 #define CTRL_PITCH_BENDER 255 619 #define CTRL_PITCH_BENDER_RANGE 254 620 #define CTRL_EXPRESSION 253 /* Obsolete */ 621 #define CTRL_MAIN_VOLUME 252 /* Obsolete */ 622 623 #define SEQ_BALANCE 11 624 #define SEQ_VOLMODE 12 625 626 /* 627 * Volume mode decides how volumes are used 628 */ 629 630 #define VOL_METHOD_ADAGIO 1 631 #define VOL_METHOD_LINEAR 2 632 633 /* 634 * Note! SEQ_WAIT, SEQ_MIDIPUTC and SEQ_ECHO are used also as 635 * input events. 636 */ 637 638 /* 639 * Event codes 0xf0 to 0xfc are reserved for future extensions. 640 */ 641 642 #define SEQ_FULLSIZE 0xfd /* Long events */ 643 /* 644 * SEQ_FULLSIZE events are used for loading patches/samples to the 645 * synthesizer devices. These events are passed directly to the driver 646 * of the associated synthesizer device. There is no limit to the size 647 * of the extended events. These events are not queued but executed 648 * immediately when the write() is called (execution can take several 649 * seconds of time). 650 * 651 * When a SEQ_FULLSIZE message is written to the device, it must 652 * be written using exactly one write() call. Other events cannot 653 * be mixed to the same write. 654 * 655 * For FM synths (YM3812/OPL3) use struct sbi_instrument and write 656 * it to the /dev/sequencer. Don't write other data together with 657 * the instrument structure Set the key field of the structure to 658 * FM_PATCH. The device field is used to route the patch to the 659 * corresponding device. 660 * 661 * For Gravis UltraSound use struct patch_info. Initialize the key field 662 * to GUS_PATCH. 663 */ 664 #define SEQ_PRIVATE 0xfe /* Low level HW dependent events (8 bytes) */ 665 #define SEQ_EXTENDED 0xff /* Extended events (8 bytes) OBSOLETE */ 666 667 /* 668 * Record for FM patches 669 */ 670 671 typedef u_char sbi_instr_data[32]; 672 673 struct sbi_instrument { 674 u_short key; /* FM_PATCH or OPL3_PATCH */ 675 #define FM_PATCH _PATCHKEY(0x01) 676 #define OPL3_PATCH _PATCHKEY(0x03) 677 short device; /* Synth# (0-4) */ 678 int channel; /* Program# to be initialized */ 679 sbi_instr_data operators; /* Reg. settings for operator cells 680 * (.SBI format) */ 681 }; 682 683 struct synth_info { /* Read only */ 684 char name[30]; 685 int device; /* 0-N. INITIALIZE BEFORE CALLING */ 686 int synth_type; 687 #define SYNTH_TYPE_FM 0 688 #define SYNTH_TYPE_SAMPLE 1 689 #define SYNTH_TYPE_MIDI 2 /* Midi interface */ 690 691 int synth_subtype; 692 #define FM_TYPE_ADLIB 0x00 693 #define FM_TYPE_OPL3 0x01 694 #define MIDI_TYPE_MPU401 0x401 695 696 #define SAMPLE_TYPE_BASIC 0x10 697 #define SAMPLE_TYPE_GUS SAMPLE_TYPE_BASIC 698 #define SAMPLE_TYPE_AWE32 0x20 699 700 int perc_mode; /* No longer supported */ 701 int nr_voices; 702 int nr_drums; /* Obsolete field */ 703 int instr_bank_size; 704 u_long capabilities; 705 #define SYNTH_CAP_PERCMODE 0x00000001 /* No longer used */ 706 #define SYNTH_CAP_OPL3 0x00000002 /* Set if OPL3 supported */ 707 #define SYNTH_CAP_INPUT 0x00000004 /* Input (MIDI) device */ 708 int dummies[19]; /* Reserve space */ 709 }; 710 711 struct sound_timer_info { 712 char name[32]; 713 int caps; 714 }; 715 716 #define MIDI_CAP_MPU401 1 /* MPU-401 intelligent mode */ 717 718 struct midi_info { 719 char name[30]; 720 int device; /* 0-N. INITIALIZE BEFORE CALLING */ 721 u_long capabilities; /* To be defined later */ 722 int dev_type; 723 int dummies[18]; /* Reserve space */ 724 }; 725 726 /* 727 * ioctl commands for the /dev/midi## 728 */ 729 typedef struct { 730 u_char cmd; 731 char nr_args, nr_returns; 732 u_char data[30]; 733 } mpu_command_rec; 734 735 #define SNDCTL_MIDI_PRETIME _IOWR('m', 0, int) 736 #define SNDCTL_MIDI_MPUMODE _IOWR('m', 1, int) 737 #define SNDCTL_MIDI_MPUCMD _IOWR('m', 2, mpu_command_rec) 738 #define MIOSPASSTHRU _IOWR('m', 3, int) 739 #define MIOGPASSTHRU _IOWR('m', 4, int) 740 741 /* 742 * IOCTL commands for /dev/dsp and /dev/audio 743 */ 744 745 #define SNDCTL_DSP_RESET _IO ('P', 0) 746 #define SNDCTL_DSP_SYNC _IO ('P', 1) 747 #define SNDCTL_DSP_SPEED _IOWR('P', 2, int) 748 #define SNDCTL_DSP_STEREO _IOWR('P', 3, int) 749 #define SNDCTL_DSP_GETBLKSIZE _IOR('P', 4, int) 750 #define SNDCTL_DSP_SETBLKSIZE _IOW('P', 4, int) 751 #define SNDCTL_DSP_SETFMT _IOWR('P',5, int) /* Selects ONE fmt*/ 752 753 /* 754 * SOUND_PCM_WRITE_CHANNELS is not that different 755 * from SNDCTL_DSP_STEREO 756 */ 757 #define SOUND_PCM_WRITE_CHANNELS _IOWR('P', 6, int) 758 #define SNDCTL_DSP_CHANNELS SOUND_PCM_WRITE_CHANNELS 759 #define SOUND_PCM_WRITE_FILTER _IOWR('P', 7, int) 760 #define SNDCTL_DSP_POST _IO ('P', 8) 761 762 /* 763 * SNDCTL_DSP_SETBLKSIZE and the following two calls mostly do 764 * the same thing, i.e. set the block size used in DMA transfers. 765 */ 766 #define SNDCTL_DSP_SUBDIVIDE _IOWR('P', 9, int) 767 #define SNDCTL_DSP_SETFRAGMENT _IOWR('P',10, int) 768 769 770 #define SNDCTL_DSP_GETFMTS _IOR ('P',11, int) /* Returns a mask */ 771 /* 772 * Buffer status queries. 773 */ 774 typedef struct audio_buf_info { 775 int fragments; /* # of avail. frags (partly used ones not counted) */ 776 int fragstotal; /* Total # of fragments allocated */ 777 int fragsize; /* Size of a fragment in bytes */ 778 779 int bytes; /* Avail. space in bytes (includes partly used fragments) */ 780 /* Note! 'bytes' could be more than fragments*fragsize */ 781 } audio_buf_info; 782 783 #define SNDCTL_DSP_GETOSPACE _IOR ('P',12, audio_buf_info) 784 #define SNDCTL_DSP_GETISPACE _IOR ('P',13, audio_buf_info) 785 786 /* 787 * SNDCTL_DSP_NONBLOCK is the same (but less powerful, since the 788 * action cannot be undone) of FIONBIO. The same can be achieved 789 * by opening the device with O_NDELAY 790 */ 791 #define SNDCTL_DSP_NONBLOCK _IO ('P',14) 792 793 #define SNDCTL_DSP_GETCAPS _IOR ('P',15, int) 794 #define DSP_CAP_REVISION 0x000000ff /* revision level (0 to 255) */ 795 #define DSP_CAP_DUPLEX 0x00000100 /* Full duplex record/playback */ 796 #define DSP_CAP_REALTIME 0x00000200 /* Real time capability */ 797 #define DSP_CAP_BATCH 0x00000400 798 /* 799 * Device has some kind of internal buffers which may 800 * cause some delays and decrease precision of timing 801 */ 802 #define DSP_CAP_COPROC 0x00000800 803 /* Has a coprocessor, sometimes it's a DSP but usually not */ 804 #define DSP_CAP_TRIGGER 0x00001000 /* Supports SETTRIGGER */ 805 #define DSP_CAP_MMAP 0x00002000 /* Supports mmap() */ 806 807 /* 808 * What do these function do ? 809 */ 810 #define SNDCTL_DSP_GETTRIGGER _IOR ('P',16, int) 811 #define SNDCTL_DSP_SETTRIGGER _IOW ('P',16, int) 812 #define PCM_ENABLE_INPUT 0x00000001 813 #define PCM_ENABLE_OUTPUT 0x00000002 814 815 typedef struct count_info { 816 int bytes; /* Total # of bytes processed */ 817 int blocks; /* # of fragment transitions since last time */ 818 int ptr; /* Current DMA pointer value */ 819 } count_info; 820 821 /* 822 * GETIPTR and GETISPACE are not that different... same for out. 823 */ 824 #define SNDCTL_DSP_GETIPTR _IOR ('P',17, count_info) 825 #define SNDCTL_DSP_GETOPTR _IOR ('P',18, count_info) 826 827 typedef struct buffmem_desc { 828 caddr_t buffer; 829 int size; 830 } buffmem_desc; 831 832 #define SNDCTL_DSP_MAPINBUF _IOR ('P', 19, buffmem_desc) 833 #define SNDCTL_DSP_MAPOUTBUF _IOR ('P', 20, buffmem_desc) 834 #define SNDCTL_DSP_SETSYNCRO _IO ('P', 21) 835 #define SNDCTL_DSP_SETDUPLEX _IO ('P', 22) 836 #define SNDCTL_DSP_GETODELAY _IOR ('P', 23, int) 837 838 /* 839 * I guess these are the readonly version of the same 840 * functions that exist above as SNDCTL_DSP_... 841 */ 842 #define SOUND_PCM_READ_RATE _IOR ('P', 2, int) 843 #define SOUND_PCM_READ_CHANNELS _IOR ('P', 6, int) 844 #define SOUND_PCM_READ_BITS _IOR ('P', 5, int) 845 #define SOUND_PCM_READ_FILTER _IOR ('P', 7, int) 846 847 /* 848 * ioctl calls to be used in communication with coprocessors and 849 * DSP chips. 850 */ 851 852 typedef struct copr_buffer { 853 int command; /* Set to 0 if not used */ 854 int flags; 855 #define CPF_NONE 0x0000 856 #define CPF_FIRST 0x0001 /* First block */ 857 #define CPF_LAST 0x0002 /* Last block */ 858 int len; 859 int offs; /* If required by the device (0 if not used) */ 860 861 u_char data[4000]; /* NOTE! 4000 is not 4k */ 862 } copr_buffer; 863 864 typedef struct copr_debug_buf { 865 int command; /* Used internally. Set to 0 */ 866 int parm1; 867 int parm2; 868 int flags; 869 int len; /* Length of data in bytes */ 870 } copr_debug_buf; 871 872 typedef struct copr_msg { 873 int len; 874 u_char data[4000]; 875 } copr_msg; 876 877 #define SNDCTL_COPR_RESET _IO ('C', 0) 878 #define SNDCTL_COPR_LOAD _IOWR('C', 1, copr_buffer) 879 #define SNDCTL_COPR_RDATA _IOWR('C', 2, copr_debug_buf) 880 #define SNDCTL_COPR_RCODE _IOWR('C', 3, copr_debug_buf) 881 #define SNDCTL_COPR_WDATA _IOW ('C', 4, copr_debug_buf) 882 #define SNDCTL_COPR_WCODE _IOW ('C', 5, copr_debug_buf) 883 #define SNDCTL_COPR_RUN _IOWR('C', 6, copr_debug_buf) 884 #define SNDCTL_COPR_HALT _IOWR('C', 7, copr_debug_buf) 885 #define SNDCTL_COPR_SENDMSG _IOW ('C', 8, copr_msg) 886 #define SNDCTL_COPR_RCVMSG _IOR ('C', 9, copr_msg) 887 888 /* 889 * IOCTL commands for /dev/mixer 890 */ 891 892 /* 893 * Mixer devices 894 * 895 * There can be up to 20 different analog mixer channels. The 896 * SOUND_MIXER_NRDEVICES gives the currently supported maximum. 897 * The SOUND_MIXER_READ_DEVMASK returns a bitmask which tells 898 * the devices supported by the particular mixer. 899 */ 900 901 #define SOUND_MIXER_NRDEVICES 25 902 #define SOUND_MIXER_VOLUME 0 /* Master output level */ 903 #define SOUND_MIXER_BASS 1 /* Treble level of all output channels */ 904 #define SOUND_MIXER_TREBLE 2 /* Bass level of all output channels */ 905 #define SOUND_MIXER_SYNTH 3 /* Volume of synthesier input */ 906 #define SOUND_MIXER_PCM 4 /* Output level for the audio device */ 907 #define SOUND_MIXER_SPEAKER 5 /* Output level for the PC speaker 908 * signals */ 909 #define SOUND_MIXER_LINE 6 /* Volume level for the line in jack */ 910 #define SOUND_MIXER_MIC 7 /* Volume for the signal coming from 911 * the microphone jack */ 912 #define SOUND_MIXER_CD 8 /* Volume level for the input signal 913 * connected to the CD audio input */ 914 #define SOUND_MIXER_IMIX 9 /* Recording monitor. It controls the 915 * output volume of the selected 916 * recording sources while recording */ 917 #define SOUND_MIXER_ALTPCM 10 /* Volume of the alternative codec 918 * device */ 919 #define SOUND_MIXER_RECLEV 11 /* Global recording level */ 920 #define SOUND_MIXER_IGAIN 12 /* Input gain */ 921 #define SOUND_MIXER_OGAIN 13 /* Output gain */ 922 /* 923 * The AD1848 codec and compatibles have three line level inputs 924 * (line, aux1 and aux2). Since each card manufacturer have assigned 925 * different meanings to these inputs, it's inpractical to assign 926 * specific meanings (line, cd, synth etc.) to them. 927 */ 928 #define SOUND_MIXER_LINE1 14 /* Input source 1 (aux1) */ 929 #define SOUND_MIXER_LINE2 15 /* Input source 2 (aux2) */ 930 #define SOUND_MIXER_LINE3 16 /* Input source 3 (line) */ 931 #define SOUND_MIXER_DIGITAL1 17 /* Digital (input) 1 */ 932 #define SOUND_MIXER_DIGITAL2 18 /* Digital (input) 2 */ 933 #define SOUND_MIXER_DIGITAL3 19 /* Digital (input) 3 */ 934 #define SOUND_MIXER_PHONEIN 20 /* Phone input */ 935 #define SOUND_MIXER_PHONEOUT 21 /* Phone output */ 936 #define SOUND_MIXER_VIDEO 22 /* Video/TV (audio) in */ 937 #define SOUND_MIXER_RADIO 23 /* Radio in */ 938 #define SOUND_MIXER_MONITOR 24 /* Monitor (usually mic) volume */ 939 940 941 /* 942 * Some on/off settings (SOUND_SPECIAL_MIN - SOUND_SPECIAL_MAX) 943 * Not counted to SOUND_MIXER_NRDEVICES, but use the same number space 944 */ 945 #define SOUND_ONOFF_MIN 28 946 #define SOUND_ONOFF_MAX 30 947 #define SOUND_MIXER_MUTE 28 /* 0 or 1 */ 948 #define SOUND_MIXER_ENHANCE 29 /* Enhanced stereo (0, 40, 60 or 80) */ 949 #define SOUND_MIXER_LOUD 30 /* 0 or 1 */ 950 951 /* Note! Number 31 cannot be used since the sign bit is reserved */ 952 #define SOUND_MIXER_NONE 31 953 954 #define SOUND_DEVICE_LABELS { \ 955 "Vol ", "Bass ", "Trebl", "Synth", "Pcm ", "Spkr ", "Line ", \ 956 "Mic ", "CD ", "Mix ", "Pcm2 ", "Rec ", "IGain", "OGain", \ 957 "Line1", "Line2", "Line3", "Digital1", "Digital2", "Digital3", \ 958 "PhoneIn", "PhoneOut", "Video", "Radio", "Monitor"} 959 960 #define SOUND_DEVICE_NAMES { \ 961 "vol", "bass", "treble", "synth", "pcm", "speaker", "line", \ 962 "mic", "cd", "mix", "pcm2", "rec", "igain", "ogain", \ 963 "line1", "line2", "line3", "dig1", "dig2", "dig3", \ 964 "phin", "phout", "video", "radio", "monitor"} 965 966 /* Device bitmask identifiers */ 967 968 #define SOUND_MIXER_RECSRC 0xff /* 1 bit per recording source */ 969 #define SOUND_MIXER_DEVMASK 0xfe /* 1 bit per supported device */ 970 #define SOUND_MIXER_RECMASK 0xfd /* 1 bit per supp. recording source */ 971 #define SOUND_MIXER_CAPS 0xfc 972 #define SOUND_CAP_EXCL_INPUT 0x00000001 /* Only 1 rec. src at a time */ 973 #define SOUND_MIXER_STEREODEVS 0xfb /* Mixer channels supporting stereo */ 974 975 /* Device mask bits */ 976 977 #define SOUND_MASK_VOLUME (1 << SOUND_MIXER_VOLUME) 978 #define SOUND_MASK_BASS (1 << SOUND_MIXER_BASS) 979 #define SOUND_MASK_TREBLE (1 << SOUND_MIXER_TREBLE) 980 #define SOUND_MASK_SYNTH (1 << SOUND_MIXER_SYNTH) 981 #define SOUND_MASK_PCM (1 << SOUND_MIXER_PCM) 982 #define SOUND_MASK_SPEAKER (1 << SOUND_MIXER_SPEAKER) 983 #define SOUND_MASK_LINE (1 << SOUND_MIXER_LINE) 984 #define SOUND_MASK_MIC (1 << SOUND_MIXER_MIC) 985 #define SOUND_MASK_CD (1 << SOUND_MIXER_CD) 986 #define SOUND_MASK_IMIX (1 << SOUND_MIXER_IMIX) 987 #define SOUND_MASK_ALTPCM (1 << SOUND_MIXER_ALTPCM) 988 #define SOUND_MASK_RECLEV (1 << SOUND_MIXER_RECLEV) 989 #define SOUND_MASK_IGAIN (1 << SOUND_MIXER_IGAIN) 990 #define SOUND_MASK_OGAIN (1 << SOUND_MIXER_OGAIN) 991 #define SOUND_MASK_LINE1 (1 << SOUND_MIXER_LINE1) 992 #define SOUND_MASK_LINE2 (1 << SOUND_MIXER_LINE2) 993 #define SOUND_MASK_LINE3 (1 << SOUND_MIXER_LINE3) 994 #define SOUND_MASK_DIGITAL1 (1 << SOUND_MIXER_DIGITAL1) 995 #define SOUND_MASK_DIGITAL2 (1 << SOUND_MIXER_DIGITAL2) 996 #define SOUND_MASK_DIGITAL3 (1 << SOUND_MIXER_DIGITAL3) 997 #define SOUND_MASK_PHONEIN (1 << SOUND_MIXER_PHONEIN) 998 #define SOUND_MASK_PHONEOUT (1 << SOUND_MIXER_PHONEOUT) 999 #define SOUND_MASK_RADIO (1 << SOUND_MIXER_RADIO) 1000 #define SOUND_MASK_VIDEO (1 << SOUND_MIXER_VIDEO) 1001 #define SOUND_MASK_MONITOR (1 << SOUND_MIXER_MONITOR) 1002 1003 /* Obsolete macros */ 1004 #define SOUND_MASK_MUTE (1 << SOUND_MIXER_MUTE) 1005 #define SOUND_MASK_ENHANCE (1 << SOUND_MIXER_ENHANCE) 1006 #define SOUND_MASK_LOUD (1 << SOUND_MIXER_LOUD) 1007 1008 #define MIXER_READ(dev) _IOR('M', dev, int) 1009 #define SOUND_MIXER_READ_VOLUME MIXER_READ(SOUND_MIXER_VOLUME) 1010 #define SOUND_MIXER_READ_BASS MIXER_READ(SOUND_MIXER_BASS) 1011 #define SOUND_MIXER_READ_TREBLE MIXER_READ(SOUND_MIXER_TREBLE) 1012 #define SOUND_MIXER_READ_SYNTH MIXER_READ(SOUND_MIXER_SYNTH) 1013 #define SOUND_MIXER_READ_PCM MIXER_READ(SOUND_MIXER_PCM) 1014 #define SOUND_MIXER_READ_SPEAKER MIXER_READ(SOUND_MIXER_SPEAKER) 1015 #define SOUND_MIXER_READ_LINE MIXER_READ(SOUND_MIXER_LINE) 1016 #define SOUND_MIXER_READ_MIC MIXER_READ(SOUND_MIXER_MIC) 1017 #define SOUND_MIXER_READ_CD MIXER_READ(SOUND_MIXER_CD) 1018 #define SOUND_MIXER_READ_IMIX MIXER_READ(SOUND_MIXER_IMIX) 1019 #define SOUND_MIXER_READ_ALTPCM MIXER_READ(SOUND_MIXER_ALTPCM) 1020 #define SOUND_MIXER_READ_RECLEV MIXER_READ(SOUND_MIXER_RECLEV) 1021 #define SOUND_MIXER_READ_IGAIN MIXER_READ(SOUND_MIXER_IGAIN) 1022 #define SOUND_MIXER_READ_OGAIN MIXER_READ(SOUND_MIXER_OGAIN) 1023 #define SOUND_MIXER_READ_LINE1 MIXER_READ(SOUND_MIXER_LINE1) 1024 #define SOUND_MIXER_READ_LINE2 MIXER_READ(SOUND_MIXER_LINE2) 1025 #define SOUND_MIXER_READ_LINE3 MIXER_READ(SOUND_MIXER_LINE3) 1026 #define SOUND_MIXER_READ_DIGITAL1 MIXER_READ(SOUND_MIXER_DIGITAL1) 1027 #define SOUND_MIXER_READ_DIGITAL2 MIXER_READ(SOUND_MIXER_DIGITAL2) 1028 #define SOUND_MIXER_READ_DIGITAL3 MIXER_READ(SOUND_MIXER_DIGITAL3) 1029 #define SOUND_MIXER_READ_PHONEIN MIXER_READ(SOUND_MIXER_PHONEIN) 1030 #define SOUND_MIXER_READ_PHONEOUT MIXER_READ(SOUND_MIXER_PHONEOUT) 1031 #define SOUND_MIXER_READ_RADIO MIXER_READ(SOUND_MIXER_RADIO) 1032 #define SOUND_MIXER_READ_VIDEO MIXER_READ(SOUND_MIXER_VIDEO) 1033 #define SOUND_MIXER_READ_MONITOR MIXER_READ(SOUND_MIXER_MONITOR) 1034 1035 /* Obsolete macros */ 1036 #define SOUND_MIXER_READ_MUTE MIXER_READ(SOUND_MIXER_MUTE) 1037 #define SOUND_MIXER_READ_ENHANCE MIXER_READ(SOUND_MIXER_ENHANCE) 1038 #define SOUND_MIXER_READ_LOUD MIXER_READ(SOUND_MIXER_LOUD) 1039 1040 #define SOUND_MIXER_READ_RECSRC MIXER_READ(SOUND_MIXER_RECSRC) 1041 #define SOUND_MIXER_READ_DEVMASK MIXER_READ(SOUND_MIXER_DEVMASK) 1042 #define SOUND_MIXER_READ_RECMASK MIXER_READ(SOUND_MIXER_RECMASK) 1043 #define SOUND_MIXER_READ_STEREODEVS MIXER_READ(SOUND_MIXER_STEREODEVS) 1044 #define SOUND_MIXER_READ_CAPS MIXER_READ(SOUND_MIXER_CAPS) 1045 1046 #define MIXER_WRITE(dev) _IOWR('M', dev, int) 1047 #define SOUND_MIXER_WRITE_VOLUME MIXER_WRITE(SOUND_MIXER_VOLUME) 1048 #define SOUND_MIXER_WRITE_BASS MIXER_WRITE(SOUND_MIXER_BASS) 1049 #define SOUND_MIXER_WRITE_TREBLE MIXER_WRITE(SOUND_MIXER_TREBLE) 1050 #define SOUND_MIXER_WRITE_SYNTH MIXER_WRITE(SOUND_MIXER_SYNTH) 1051 #define SOUND_MIXER_WRITE_PCM MIXER_WRITE(SOUND_MIXER_PCM) 1052 #define SOUND_MIXER_WRITE_SPEAKER MIXER_WRITE(SOUND_MIXER_SPEAKER) 1053 #define SOUND_MIXER_WRITE_LINE MIXER_WRITE(SOUND_MIXER_LINE) 1054 #define SOUND_MIXER_WRITE_MIC MIXER_WRITE(SOUND_MIXER_MIC) 1055 #define SOUND_MIXER_WRITE_CD MIXER_WRITE(SOUND_MIXER_CD) 1056 #define SOUND_MIXER_WRITE_IMIX MIXER_WRITE(SOUND_MIXER_IMIX) 1057 #define SOUND_MIXER_WRITE_ALTPCM MIXER_WRITE(SOUND_MIXER_ALTPCM) 1058 #define SOUND_MIXER_WRITE_RECLEV MIXER_WRITE(SOUND_MIXER_RECLEV) 1059 #define SOUND_MIXER_WRITE_IGAIN MIXER_WRITE(SOUND_MIXER_IGAIN) 1060 #define SOUND_MIXER_WRITE_OGAIN MIXER_WRITE(SOUND_MIXER_OGAIN) 1061 #define SOUND_MIXER_WRITE_LINE1 MIXER_WRITE(SOUND_MIXER_LINE1) 1062 #define SOUND_MIXER_WRITE_LINE2 MIXER_WRITE(SOUND_MIXER_LINE2) 1063 #define SOUND_MIXER_WRITE_LINE3 MIXER_WRITE(SOUND_MIXER_LINE3) 1064 #define SOUND_MIXER_WRITE_DIGITAL1 MIXER_WRITE(SOUND_MIXER_DIGITAL1) 1065 #define SOUND_MIXER_WRITE_DIGITAL2 MIXER_WRITE(SOUND_MIXER_DIGITAL2) 1066 #define SOUND_MIXER_WRITE_DIGITAL3 MIXER_WRITE(SOUND_MIXER_DIGITAL3) 1067 #define SOUND_MIXER_WRITE_PHONEIN MIXER_WRITE(SOUND_MIXER_PHONEIN) 1068 #define SOUND_MIXER_WRITE_PHONEOUT MIXER_WRITE(SOUND_MIXER_PHONEOUT) 1069 #define SOUND_MIXER_WRITE_RADIO MIXER_WRITE(SOUND_MIXER_RADIO) 1070 #define SOUND_MIXER_WRITE_VIDEO MIXER_WRITE(SOUND_MIXER_VIDEO) 1071 #define SOUND_MIXER_WRITE_MONITOR MIXER_WRITE(SOUND_MIXER_MONITOR) 1072 1073 #define SOUND_MIXER_WRITE_MUTE MIXER_WRITE(SOUND_MIXER_MUTE) 1074 #define SOUND_MIXER_WRITE_ENHANCE MIXER_WRITE(SOUND_MIXER_ENHANCE) 1075 #define SOUND_MIXER_WRITE_LOUD MIXER_WRITE(SOUND_MIXER_LOUD) 1076 1077 #define SOUND_MIXER_WRITE_RECSRC MIXER_WRITE(SOUND_MIXER_RECSRC) 1078 1079 typedef struct mixer_info { 1080 char id[16]; 1081 char name[32]; 1082 int modify_counter; 1083 int fillers[10]; 1084 } mixer_info; 1085 1086 #define SOUND_MIXER_INFO _IOR('M', 101, mixer_info) 1087 1088 #define LEFT_CHN 0 1089 #define RIGHT_CHN 1 1090 1091 /* 1092 * Level 2 event types for /dev/sequencer 1093 */ 1094 1095 /* 1096 * The 4 most significant bits of byte 0 specify the class of 1097 * the event: 1098 * 1099 * 0x8X = system level events, 1100 * 0x9X = device/port specific events, event[1] = device/port, 1101 * The last 4 bits give the subtype: 1102 * 0x02 = Channel event (event[3] = chn). 1103 * 0x01 = note event (event[4] = note). 1104 * (0x01 is not used alone but always with bit 0x02). 1105 * event[2] = MIDI message code (0x80=note off etc.) 1106 * 1107 */ 1108 1109 #define EV_SEQ_LOCAL 0x80 1110 #define EV_TIMING 0x81 1111 #define EV_CHN_COMMON 0x92 1112 #define EV_CHN_VOICE 0x93 1113 #define EV_SYSEX 0x94 1114 /* 1115 * Event types 200 to 220 are reserved for application use. 1116 * These numbers will not be used by the driver. 1117 */ 1118 1119 /* 1120 * Events for event type EV_CHN_VOICE 1121 */ 1122 1123 #define MIDI_NOTEOFF 0x80 1124 #define MIDI_NOTEON 0x90 1125 #define MIDI_KEY_PRESSURE 0xA0 1126 1127 /* 1128 * Events for event type EV_CHN_COMMON 1129 */ 1130 1131 #define MIDI_CTL_CHANGE 0xB0 1132 #define MIDI_PGM_CHANGE 0xC0 1133 #define MIDI_CHN_PRESSURE 0xD0 1134 #define MIDI_PITCH_BEND 0xE0 1135 1136 #define MIDI_SYSTEM_PREFIX 0xF0 1137 1138 /* 1139 * Timer event types 1140 */ 1141 #define TMR_WAIT_REL 1 /* Time relative to the prev time */ 1142 #define TMR_WAIT_ABS 2 /* Absolute time since TMR_START */ 1143 #define TMR_STOP 3 1144 #define TMR_START 4 1145 #define TMR_CONTINUE 5 1146 #define TMR_TEMPO 6 1147 #define TMR_ECHO 8 1148 #define TMR_CLOCK 9 /* MIDI clock */ 1149 #define TMR_SPP 10 /* Song position pointer */ 1150 #define TMR_TIMESIG 11 /* Time signature */ 1151 1152 /* 1153 * Local event types 1154 */ 1155 #define LOCL_STARTAUDIO 1 1156 1157 #if (!defined(_KERNEL) && !defined(INKERNEL)) || defined(USE_SEQ_MACROS) 1158 /* 1159 * Some convenience macros to simplify programming of the 1160 * /dev/sequencer interface 1161 * 1162 * These macros define the API which should be used when possible. 1163 */ 1164 1165 #ifndef USE_SIMPLE_MACROS 1166 void seqbuf_dump(void); /* This function must be provided by programs */ 1167 1168 /* Sample seqbuf_dump() implementation: 1169 * 1170 * SEQ_DEFINEBUF (2048); -- Defines a buffer for 2048 bytes 1171 * 1172 * int seqfd; -- The file descriptor for /dev/sequencer. 1173 * 1174 * void 1175 * seqbuf_dump () 1176 * { 1177 * if (_seqbufptr) 1178 * if (write (seqfd, _seqbuf, _seqbufptr) == -1) 1179 * { 1180 * perror ("write /dev/sequencer"); 1181 * exit (-1); 1182 * } 1183 * _seqbufptr = 0; 1184 * } 1185 */ 1186 1187 #define SEQ_DEFINEBUF(len) \ 1188 u_char _seqbuf[len]; int _seqbuflen = len;int _seqbufptr = 0 1189 #define SEQ_USE_EXTBUF() \ 1190 extern u_char _seqbuf[]; \ 1191 extern int _seqbuflen;extern int _seqbufptr 1192 #define SEQ_DECLAREBUF() SEQ_USE_EXTBUF() 1193 #define SEQ_PM_DEFINES struct patmgr_info _pm_info 1194 #define _SEQ_NEEDBUF(len) \ 1195 if ((_seqbufptr+(len)) > _seqbuflen) \ 1196 seqbuf_dump() 1197 #define _SEQ_ADVBUF(len) _seqbufptr += len 1198 #define SEQ_DUMPBUF seqbuf_dump 1199 #else 1200 /* 1201 * This variation of the sequencer macros is used just to format one event 1202 * using fixed buffer. 1203 * 1204 * The program using the macro library must define the following macros before 1205 * using this library. 1206 * 1207 * #define _seqbuf name of the buffer (u_char[]) 1208 * #define _SEQ_ADVBUF(len) If the applic needs to know the exact 1209 * size of the event, this macro can be used. 1210 * Otherwise this must be defined as empty. 1211 * #define _seqbufptr Define the name of index variable or 0 if 1212 * not required. 1213 */ 1214 #define _SEQ_NEEDBUF(len) /* empty */ 1215 #endif 1216 1217 #define PM_LOAD_PATCH(dev, bank, pgm) \ 1218 (SEQ_DUMPBUF(), _pm_info.command = _PM_LOAD_PATCH, \ 1219 _pm_info.device=dev, _pm_info.data.data8[0]=pgm, \ 1220 _pm_info.parm1 = bank, _pm_info.parm2 = 1, \ 1221 ioctl(seqfd, SNDCTL_PMGR_ACCESS, &_pm_info)) 1222 #define PM_LOAD_PATCHES(dev, bank, pgm) \ 1223 (SEQ_DUMPBUF(), _pm_info.command = _PM_LOAD_PATCH, \ 1224 _pm_info.device=dev, bcopy( pgm, _pm_info.data.data8, 128), \ 1225 _pm_info.parm1 = bank, _pm_info.parm2 = 128, \ 1226 ioctl(seqfd, SNDCTL_PMGR_ACCESS, &_pm_info)) 1227 1228 #define SEQ_VOLUME_MODE(dev, mode) { \ 1229 _SEQ_NEEDBUF(8);\ 1230 _seqbuf[_seqbufptr] = SEQ_EXTENDED;\ 1231 _seqbuf[_seqbufptr+1] = SEQ_VOLMODE;\ 1232 _seqbuf[_seqbufptr+2] = (dev);\ 1233 _seqbuf[_seqbufptr+3] = (mode);\ 1234 _seqbuf[_seqbufptr+4] = 0;\ 1235 _seqbuf[_seqbufptr+5] = 0;\ 1236 _seqbuf[_seqbufptr+6] = 0;\ 1237 _seqbuf[_seqbufptr+7] = 0;\ 1238 _SEQ_ADVBUF(8);} 1239 1240 /* 1241 * Midi voice messages 1242 */ 1243 1244 #define _CHN_VOICE(dev, event, chn, note, parm) { \ 1245 _SEQ_NEEDBUF(8);\ 1246 _seqbuf[_seqbufptr] = EV_CHN_VOICE;\ 1247 _seqbuf[_seqbufptr+1] = (dev);\ 1248 _seqbuf[_seqbufptr+2] = (event);\ 1249 _seqbuf[_seqbufptr+3] = (chn);\ 1250 _seqbuf[_seqbufptr+4] = (note);\ 1251 _seqbuf[_seqbufptr+5] = (parm);\ 1252 _seqbuf[_seqbufptr+6] = (0);\ 1253 _seqbuf[_seqbufptr+7] = 0;\ 1254 _SEQ_ADVBUF(8);} 1255 1256 #define SEQ_START_NOTE(dev, chn, note, vol) \ 1257 _CHN_VOICE(dev, MIDI_NOTEON, chn, note, vol) 1258 1259 #define SEQ_STOP_NOTE(dev, chn, note, vol) \ 1260 _CHN_VOICE(dev, MIDI_NOTEOFF, chn, note, vol) 1261 1262 #define SEQ_KEY_PRESSURE(dev, chn, note, pressure) \ 1263 _CHN_VOICE(dev, MIDI_KEY_PRESSURE, chn, note, pressure) 1264 1265 /* 1266 * Midi channel messages 1267 */ 1268 1269 #define _CHN_COMMON(dev, event, chn, p1, p2, w14) { \ 1270 _SEQ_NEEDBUF(8);\ 1271 _seqbuf[_seqbufptr] = EV_CHN_COMMON;\ 1272 _seqbuf[_seqbufptr+1] = (dev);\ 1273 _seqbuf[_seqbufptr+2] = (event);\ 1274 _seqbuf[_seqbufptr+3] = (chn);\ 1275 _seqbuf[_seqbufptr+4] = (p1);\ 1276 _seqbuf[_seqbufptr+5] = (p2);\ 1277 *(short *)&_seqbuf[_seqbufptr+6] = (w14);\ 1278 _SEQ_ADVBUF(8);} 1279 /* 1280 * SEQ_SYSEX permits sending of sysex messages. (It may look that it permits 1281 * sending any MIDI bytes but it's absolutely not possible. Trying to do 1282 * so _will_ cause problems with MPU401 intelligent mode). 1283 * 1284 * Sysex messages are sent in blocks of 1 to 6 bytes. Longer messages must be 1285 * sent by calling SEQ_SYSEX() several times (there must be no other events 1286 * between them). First sysex fragment must have 0xf0 in the first byte 1287 * and the last byte (buf[len-1] of the last fragment must be 0xf7. No byte 1288 * between these sysex start and end markers cannot be larger than 0x7f. Also 1289 * lengths of each fragments (except the last one) must be 6. 1290 * 1291 * Breaking the above rules may work with some MIDI ports but is likely to 1292 * cause fatal problems with some other devices (such as MPU401). 1293 */ 1294 #define SEQ_SYSEX(dev, buf, len) { \ 1295 int i, l=(len); if (l>6)l=6;\ 1296 _SEQ_NEEDBUF(8);\ 1297 _seqbuf[_seqbufptr] = EV_SYSEX;\ 1298 for(i=0;i<l;i++)_seqbuf[_seqbufptr+i+1] = (buf)[i];\ 1299 for(i=l;i<6;i++)_seqbuf[_seqbufptr+i+1] = 0xff;\ 1300 _SEQ_ADVBUF(8);} 1301 1302 #define SEQ_CHN_PRESSURE(dev, chn, pressure) \ 1303 _CHN_COMMON(dev, MIDI_CHN_PRESSURE, chn, pressure, 0, 0) 1304 1305 #define SEQ_SET_PATCH(dev, chn, patch) \ 1306 _CHN_COMMON(dev, MIDI_PGM_CHANGE, chn, patch, 0, 0) 1307 1308 #define SEQ_CONTROL(dev, chn, controller, value) \ 1309 _CHN_COMMON(dev, MIDI_CTL_CHANGE, chn, controller, 0, value) 1310 1311 #define SEQ_BENDER(dev, chn, value) \ 1312 _CHN_COMMON(dev, MIDI_PITCH_BEND, chn, 0, 0, value) 1313 1314 1315 #define SEQ_V2_X_CONTROL(dev, voice, controller, value) { \ 1316 _SEQ_NEEDBUF(8);\ 1317 _seqbuf[_seqbufptr] = SEQ_EXTENDED;\ 1318 _seqbuf[_seqbufptr+1] = SEQ_CONTROLLER;\ 1319 _seqbuf[_seqbufptr+2] = (dev);\ 1320 _seqbuf[_seqbufptr+3] = (voice);\ 1321 _seqbuf[_seqbufptr+4] = (controller);\ 1322 *(short *)&_seqbuf[_seqbufptr+5] = (value);\ 1323 _seqbuf[_seqbufptr+7] = 0;\ 1324 _SEQ_ADVBUF(8);} 1325 1326 /* 1327 * The following 5 macros are incorrectly implemented and obsolete. 1328 * Use SEQ_BENDER and SEQ_CONTROL (with proper controller) instead. 1329 */ 1330 1331 #define SEQ_PITCHBEND(dev, voice, value) \ 1332 SEQ_V2_X_CONTROL(dev, voice, CTRL_PITCH_BENDER, value) 1333 #define SEQ_BENDER_RANGE(dev, voice, value) \ 1334 SEQ_V2_X_CONTROL(dev, voice, CTRL_PITCH_BENDER_RANGE, value) 1335 #define SEQ_EXPRESSION(dev, voice, value) \ 1336 SEQ_CONTROL(dev, voice, CTL_EXPRESSION, value*128) 1337 #define SEQ_MAIN_VOLUME(dev, voice, value) \ 1338 SEQ_CONTROL(dev, voice, CTL_MAIN_VOLUME, (value*16383)/100) 1339 #define SEQ_PANNING(dev, voice, pos) \ 1340 SEQ_CONTROL(dev, voice, CTL_PAN, (pos+128) / 2) 1341 1342 /* 1343 * Timing and syncronization macros 1344 */ 1345 1346 #define _TIMER_EVENT(ev, parm) { \ 1347 _SEQ_NEEDBUF(8);\ 1348 _seqbuf[_seqbufptr+0] = EV_TIMING; \ 1349 _seqbuf[_seqbufptr+1] = (ev); \ 1350 _seqbuf[_seqbufptr+2] = 0;\ 1351 _seqbuf[_seqbufptr+3] = 0;\ 1352 *(u_int *)&_seqbuf[_seqbufptr+4] = (parm); \ 1353 _SEQ_ADVBUF(8); \ 1354 } 1355 1356 #define SEQ_START_TIMER() _TIMER_EVENT(TMR_START, 0) 1357 #define SEQ_STOP_TIMER() _TIMER_EVENT(TMR_STOP, 0) 1358 #define SEQ_CONTINUE_TIMER() _TIMER_EVENT(TMR_CONTINUE, 0) 1359 #define SEQ_WAIT_TIME(ticks) _TIMER_EVENT(TMR_WAIT_ABS, ticks) 1360 #define SEQ_DELTA_TIME(ticks) _TIMER_EVENT(TMR_WAIT_REL, ticks) 1361 #define SEQ_ECHO_BACK(key) _TIMER_EVENT(TMR_ECHO, key) 1362 #define SEQ_SET_TEMPO(value) _TIMER_EVENT(TMR_TEMPO, value) 1363 #define SEQ_SONGPOS(pos) _TIMER_EVENT(TMR_SPP, pos) 1364 #define SEQ_TIME_SIGNATURE(sig) _TIMER_EVENT(TMR_TIMESIG, sig) 1365 1366 /* 1367 * Local control events 1368 */ 1369 1370 #define _LOCAL_EVENT(ev, parm) { \ 1371 _SEQ_NEEDBUF(8);\ 1372 _seqbuf[_seqbufptr+0] = EV_SEQ_LOCAL; \ 1373 _seqbuf[_seqbufptr+1] = (ev); \ 1374 _seqbuf[_seqbufptr+2] = 0;\ 1375 _seqbuf[_seqbufptr+3] = 0;\ 1376 *(u_int *)&_seqbuf[_seqbufptr+4] = (parm); \ 1377 _SEQ_ADVBUF(8); \ 1378 } 1379 1380 #define SEQ_PLAYAUDIO(devmask) _LOCAL_EVENT(LOCL_STARTAUDIO, devmask) 1381 /* 1382 * Events for the level 1 interface only 1383 */ 1384 1385 #define SEQ_MIDIOUT(device, byte) { \ 1386 _SEQ_NEEDBUF(4);\ 1387 _seqbuf[_seqbufptr] = SEQ_MIDIPUTC;\ 1388 _seqbuf[_seqbufptr+1] = (byte);\ 1389 _seqbuf[_seqbufptr+2] = (device);\ 1390 _seqbuf[_seqbufptr+3] = 0;\ 1391 _SEQ_ADVBUF(4);} 1392 1393 /* 1394 * Patch loading. 1395 */ 1396 #define SEQ_WRPATCH(patchx, len) { \ 1397 if (_seqbufptr) seqbuf_dump(); \ 1398 if (write(seqfd, (char*)(patchx), len)==-1) \ 1399 perror("Write patch: /dev/sequencer"); \ 1400 } 1401 1402 #define SEQ_WRPATCH2(patchx, len) \ 1403 ( seqbuf_dump(), write(seqfd, (char*)(patchx), len) ) 1404 1405 #endif 1406 1407 /* 1408 * Here I have moved all the aliases for ioctl names. 1409 */ 1410 1411 #define SNDCTL_DSP_SAMPLESIZE SNDCTL_DSP_SETFMT 1412 #define SOUND_PCM_WRITE_BITS SNDCTL_DSP_SETFMT 1413 #define SOUND_PCM_SETFMT SNDCTL_DSP_SETFMT 1414 1415 #define SOUND_PCM_WRITE_RATE SNDCTL_DSP_SPEED 1416 #define SOUND_PCM_POST SNDCTL_DSP_POST 1417 #define SOUND_PCM_RESET SNDCTL_DSP_RESET 1418 #define SOUND_PCM_SYNC SNDCTL_DSP_SYNC 1419 #define SOUND_PCM_SUBDIVIDE SNDCTL_DSP_SUBDIVIDE 1420 #define SOUND_PCM_SETFRAGMENT SNDCTL_DSP_SETFRAGMENT 1421 #define SOUND_PCM_GETFMTS SNDCTL_DSP_GETFMTS 1422 #define SOUND_PCM_GETOSPACE SNDCTL_DSP_GETOSPACE 1423 #define SOUND_PCM_GETISPACE SNDCTL_DSP_GETISPACE 1424 #define SOUND_PCM_NONBLOCK SNDCTL_DSP_NONBLOCK 1425 #define SOUND_PCM_GETCAPS SNDCTL_DSP_GETCAPS 1426 #define SOUND_PCM_GETTRIGGER SNDCTL_DSP_GETTRIGGER 1427 #define SOUND_PCM_SETTRIGGER SNDCTL_DSP_SETTRIGGER 1428 #define SOUND_PCM_SETSYNCRO SNDCTL_DSP_SETSYNCRO 1429 #define SOUND_PCM_GETIPTR SNDCTL_DSP_GETIPTR 1430 #define SOUND_PCM_GETOPTR SNDCTL_DSP_GETOPTR 1431 #define SOUND_PCM_MAPINBUF SNDCTL_DSP_MAPINBUF 1432 #define SOUND_PCM_MAPOUTBUF SNDCTL_DSP_MAPOUTBUF 1433 1434 #endif /* !_SYS_SOUNDCARD_H_ */ 1435