1 /*- 2 * Copyright (c) 1982, 1986, 1988, 1993 3 * The Regents of the University of California. 4 * All rights reserved. 5 * 6 * Redistribution and use in source and binary forms, with or without 7 * modification, are permitted provided that the following conditions 8 * are met: 9 * 1. Redistributions of source code must retain the above copyright 10 * notice, this list of conditions and the following disclaimer. 11 * 2. Redistributions in binary form must reproduce the above copyright 12 * notice, this list of conditions and the following disclaimer in the 13 * documentation and/or other materials provided with the distribution. 14 * 3. Neither the name of the University nor the names of its contributors 15 * may be used to endorse or promote products derived from this software 16 * without specific prior written permission. 17 * 18 * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND 19 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE 20 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE 21 * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE 22 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL 23 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS 24 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) 25 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT 26 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY 27 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF 28 * SUCH DAMAGE. 29 * 30 * @(#)mbuf.h 8.5 (Berkeley) 2/19/95 31 * $FreeBSD$ 32 */ 33 34 #ifndef _SYS_MBUF_H_ 35 #define _SYS_MBUF_H_ 36 37 /* XXX: These includes suck. Sorry! */ 38 #include <sys/queue.h> 39 #ifdef _KERNEL 40 #include <sys/systm.h> 41 #include <vm/uma.h> 42 #ifdef WITNESS 43 #include <sys/lock.h> 44 #endif 45 #endif 46 47 #ifdef _KERNEL 48 #include <sys/sdt.h> 49 50 #define MBUF_PROBE1(probe, arg0) \ 51 SDT_PROBE1(sdt, , , probe, arg0) 52 #define MBUF_PROBE2(probe, arg0, arg1) \ 53 SDT_PROBE2(sdt, , , probe, arg0, arg1) 54 #define MBUF_PROBE3(probe, arg0, arg1, arg2) \ 55 SDT_PROBE3(sdt, , , probe, arg0, arg1, arg2) 56 #define MBUF_PROBE4(probe, arg0, arg1, arg2, arg3) \ 57 SDT_PROBE4(sdt, , , probe, arg0, arg1, arg2, arg3) 58 #define MBUF_PROBE5(probe, arg0, arg1, arg2, arg3, arg4) \ 59 SDT_PROBE5(sdt, , , probe, arg0, arg1, arg2, arg3, arg4) 60 61 SDT_PROBE_DECLARE(sdt, , , m__init); 62 SDT_PROBE_DECLARE(sdt, , , m__gethdr); 63 SDT_PROBE_DECLARE(sdt, , , m__get); 64 SDT_PROBE_DECLARE(sdt, , , m__getcl); 65 SDT_PROBE_DECLARE(sdt, , , m__clget); 66 SDT_PROBE_DECLARE(sdt, , , m__cljget); 67 SDT_PROBE_DECLARE(sdt, , , m__cljset); 68 SDT_PROBE_DECLARE(sdt, , , m__free); 69 SDT_PROBE_DECLARE(sdt, , , m__freem); 70 71 #endif /* _KERNEL */ 72 73 /* 74 * Mbufs are of a single size, MSIZE (sys/param.h), which includes overhead. 75 * An mbuf may add a single "mbuf cluster" of size MCLBYTES (also in 76 * sys/param.h), which has no additional overhead and is used instead of the 77 * internal data area; this is done when at least MINCLSIZE of data must be 78 * stored. Additionally, it is possible to allocate a separate buffer 79 * externally and attach it to the mbuf in a way similar to that of mbuf 80 * clusters. 81 * 82 * NB: These calculation do not take actual compiler-induced alignment and 83 * padding inside the complete struct mbuf into account. Appropriate 84 * attention is required when changing members of struct mbuf. 85 * 86 * MLEN is data length in a normal mbuf. 87 * MHLEN is data length in an mbuf with pktheader. 88 * MINCLSIZE is a smallest amount of data that should be put into cluster. 89 * 90 * Compile-time assertions in uipc_mbuf.c test these values to ensure that 91 * they are sensible. 92 */ 93 struct mbuf; 94 #define MHSIZE offsetof(struct mbuf, m_dat) 95 #define MPKTHSIZE offsetof(struct mbuf, m_pktdat) 96 #define MLEN ((int)(MSIZE - MHSIZE)) 97 #define MHLEN ((int)(MSIZE - MPKTHSIZE)) 98 #define MINCLSIZE (MHLEN + 1) 99 100 #ifdef _KERNEL 101 /*- 102 * Macro for type conversion: convert mbuf pointer to data pointer of correct 103 * type: 104 * 105 * mtod(m, t) -- Convert mbuf pointer to data pointer of correct type. 106 * mtodo(m, o) -- Same as above but with offset 'o' into data. 107 */ 108 #define mtod(m, t) ((t)((m)->m_data)) 109 #define mtodo(m, o) ((void *)(((m)->m_data) + (o))) 110 111 /* 112 * Argument structure passed to UMA routines during mbuf and packet 113 * allocations. 114 */ 115 struct mb_args { 116 int flags; /* Flags for mbuf being allocated */ 117 short type; /* Type of mbuf being allocated */ 118 }; 119 #endif /* _KERNEL */ 120 121 /* 122 * Packet tag structure (see below for details). 123 */ 124 struct m_tag { 125 SLIST_ENTRY(m_tag) m_tag_link; /* List of packet tags */ 126 u_int16_t m_tag_id; /* Tag ID */ 127 u_int16_t m_tag_len; /* Length of data */ 128 u_int32_t m_tag_cookie; /* ABI/Module ID */ 129 void (*m_tag_free)(struct m_tag *); 130 }; 131 132 /* 133 * Record/packet header in first mbuf of chain; valid only if M_PKTHDR is set. 134 * Size ILP32: 48 135 * LP64: 56 136 * Compile-time assertions in uipc_mbuf.c test these values to ensure that 137 * they are correct. 138 */ 139 struct pkthdr { 140 struct ifnet *rcvif; /* rcv interface */ 141 SLIST_HEAD(packet_tags, m_tag) tags; /* list of packet tags */ 142 int32_t len; /* total packet length */ 143 144 /* Layer crossing persistent information. */ 145 uint32_t flowid; /* packet's 4-tuple system */ 146 uint64_t csum_flags; /* checksum and offload features */ 147 uint16_t fibnum; /* this packet should use this fib */ 148 uint8_t cosqos; /* class/quality of service */ 149 uint8_t rsstype; /* hash type */ 150 uint8_t l2hlen; /* layer 2 header length */ 151 uint8_t l3hlen; /* layer 3 header length */ 152 uint8_t l4hlen; /* layer 4 header length */ 153 uint8_t l5hlen; /* layer 5 header length */ 154 union { 155 uint8_t eight[8]; 156 uint16_t sixteen[4]; 157 uint32_t thirtytwo[2]; 158 uint64_t sixtyfour[1]; 159 uintptr_t unintptr[1]; 160 void *ptr; 161 } PH_per; 162 163 /* Layer specific non-persistent local storage for reassembly, etc. */ 164 union { 165 uint8_t eight[8]; 166 uint16_t sixteen[4]; 167 uint32_t thirtytwo[2]; 168 uint64_t sixtyfour[1]; 169 uintptr_t unintptr[1]; 170 void *ptr; 171 } PH_loc; 172 }; 173 #define ether_vtag PH_per.sixteen[0] 174 #define PH_vt PH_per 175 #define vt_nrecs sixteen[0] 176 #define tso_segsz PH_per.sixteen[1] 177 #define lro_nsegs tso_segsz 178 #define csum_phsum PH_per.sixteen[2] 179 #define csum_data PH_per.thirtytwo[1] 180 181 /* 182 * Description of external storage mapped into mbuf; valid only if M_EXT is 183 * set. 184 * Size ILP32: 28 185 * LP64: 48 186 * Compile-time assertions in uipc_mbuf.c test these values to ensure that 187 * they are correct. 188 */ 189 struct m_ext { 190 union { 191 volatile u_int ext_count; /* value of ref count info */ 192 volatile u_int *ext_cnt; /* pointer to ref count info */ 193 }; 194 caddr_t ext_buf; /* start of buffer */ 195 uint32_t ext_size; /* size of buffer, for ext_free */ 196 uint32_t ext_type:8, /* type of external storage */ 197 ext_flags:24; /* external storage mbuf flags */ 198 void (*ext_free) /* free routine if not the usual */ 199 (struct mbuf *, void *, void *); 200 void *ext_arg1; /* optional argument pointer */ 201 void *ext_arg2; /* optional argument pointer */ 202 }; 203 204 /* 205 * The core of the mbuf object along with some shortcut defines for practical 206 * purposes. 207 */ 208 struct mbuf { 209 /* 210 * Header present at the beginning of every mbuf. 211 * Size ILP32: 24 212 * LP64: 32 213 * Compile-time assertions in uipc_mbuf.c test these values to ensure 214 * that they are correct. 215 */ 216 union { /* next buffer in chain */ 217 struct mbuf *m_next; 218 SLIST_ENTRY(mbuf) m_slist; 219 STAILQ_ENTRY(mbuf) m_stailq; 220 }; 221 union { /* next chain in queue/record */ 222 struct mbuf *m_nextpkt; 223 SLIST_ENTRY(mbuf) m_slistpkt; 224 STAILQ_ENTRY(mbuf) m_stailqpkt; 225 }; 226 caddr_t m_data; /* location of data */ 227 int32_t m_len; /* amount of data in this mbuf */ 228 uint32_t m_type:8, /* type of data in this mbuf */ 229 m_flags:24; /* flags; see below */ 230 #if !defined(__LP64__) 231 uint32_t m_pad; /* pad for 64bit alignment */ 232 #endif 233 234 /* 235 * A set of optional headers (packet header, external storage header) 236 * and internal data storage. Historically, these arrays were sized 237 * to MHLEN (space left after a packet header) and MLEN (space left 238 * after only a regular mbuf header); they are now variable size in 239 * order to support future work on variable-size mbufs. 240 */ 241 union { 242 struct { 243 struct pkthdr m_pkthdr; /* M_PKTHDR set */ 244 union { 245 struct m_ext m_ext; /* M_EXT set */ 246 char m_pktdat[0]; 247 }; 248 }; 249 char m_dat[0]; /* !M_PKTHDR, !M_EXT */ 250 }; 251 }; 252 253 /* 254 * mbuf flags of global significance and layer crossing. 255 * Those of only protocol/layer specific significance are to be mapped 256 * to M_PROTO[1-12] and cleared at layer handoff boundaries. 257 * NB: Limited to the lower 24 bits. 258 */ 259 #define M_EXT 0x00000001 /* has associated external storage */ 260 #define M_PKTHDR 0x00000002 /* start of record */ 261 #define M_EOR 0x00000004 /* end of record */ 262 #define M_RDONLY 0x00000008 /* associated data is marked read-only */ 263 #define M_BCAST 0x00000010 /* send/received as link-level broadcast */ 264 #define M_MCAST 0x00000020 /* send/received as link-level multicast */ 265 #define M_PROMISC 0x00000040 /* packet was not for us */ 266 #define M_VLANTAG 0x00000080 /* ether_vtag is valid */ 267 #define M_UNUSED_8 0x00000100 /* --available-- */ 268 #define M_NOFREE 0x00000200 /* do not free mbuf, embedded in cluster */ 269 270 #define M_PROTO1 0x00001000 /* protocol-specific */ 271 #define M_PROTO2 0x00002000 /* protocol-specific */ 272 #define M_PROTO3 0x00004000 /* protocol-specific */ 273 #define M_PROTO4 0x00008000 /* protocol-specific */ 274 #define M_PROTO5 0x00010000 /* protocol-specific */ 275 #define M_PROTO6 0x00020000 /* protocol-specific */ 276 #define M_PROTO7 0x00040000 /* protocol-specific */ 277 #define M_PROTO8 0x00080000 /* protocol-specific */ 278 #define M_PROTO9 0x00100000 /* protocol-specific */ 279 #define M_PROTO10 0x00200000 /* protocol-specific */ 280 #define M_PROTO11 0x00400000 /* protocol-specific */ 281 #define M_PROTO12 0x00800000 /* protocol-specific */ 282 283 #define MB_DTOR_SKIP 0x1 /* don't pollute the cache by touching a freed mbuf */ 284 285 /* 286 * Flags to purge when crossing layers. 287 */ 288 #define M_PROTOFLAGS \ 289 (M_PROTO1|M_PROTO2|M_PROTO3|M_PROTO4|M_PROTO5|M_PROTO6|M_PROTO7|M_PROTO8|\ 290 M_PROTO9|M_PROTO10|M_PROTO11|M_PROTO12) 291 292 /* 293 * Flags preserved when copying m_pkthdr. 294 */ 295 #define M_COPYFLAGS \ 296 (M_PKTHDR|M_EOR|M_RDONLY|M_BCAST|M_MCAST|M_PROMISC|M_VLANTAG| \ 297 M_PROTOFLAGS) 298 299 /* 300 * Mbuf flag description for use with printf(9) %b identifier. 301 */ 302 #define M_FLAG_BITS \ 303 "\20\1M_EXT\2M_PKTHDR\3M_EOR\4M_RDONLY\5M_BCAST\6M_MCAST" \ 304 "\7M_PROMISC\10M_VLANTAG" 305 #define M_FLAG_PROTOBITS \ 306 "\15M_PROTO1\16M_PROTO2\17M_PROTO3\20M_PROTO4\21M_PROTO5" \ 307 "\22M_PROTO6\23M_PROTO7\24M_PROTO8\25M_PROTO9\26M_PROTO10" \ 308 "\27M_PROTO11\30M_PROTO12" 309 #define M_FLAG_PRINTF (M_FLAG_BITS M_FLAG_PROTOBITS) 310 311 /* 312 * Network interface cards are able to hash protocol fields (such as IPv4 313 * addresses and TCP port numbers) classify packets into flows. These flows 314 * can then be used to maintain ordering while delivering packets to the OS 315 * via parallel input queues, as well as to provide a stateless affinity 316 * model. NIC drivers can pass up the hash via m->m_pkthdr.flowid, and set 317 * m_flag fields to indicate how the hash should be interpreted by the 318 * network stack. 319 * 320 * Most NICs support RSS, which provides ordering and explicit affinity, and 321 * use the hash m_flag bits to indicate what header fields were covered by 322 * the hash. M_HASHTYPE_OPAQUE and M_HASHTYPE_OPAQUE_HASH can be set by non- 323 * RSS cards or configurations that provide an opaque flow identifier, allowing 324 * for ordering and distribution without explicit affinity. Additionally, 325 * M_HASHTYPE_OPAQUE_HASH indicates that the flow identifier has hash 326 * properties. 327 */ 328 #define M_HASHTYPE_HASHPROP 0x80 /* has hash properties */ 329 #define M_HASHTYPE_HASH(t) (M_HASHTYPE_HASHPROP | (t)) 330 /* Microsoft RSS standard hash types */ 331 #define M_HASHTYPE_NONE 0 332 #define M_HASHTYPE_RSS_IPV4 M_HASHTYPE_HASH(1) /* IPv4 2-tuple */ 333 #define M_HASHTYPE_RSS_TCP_IPV4 M_HASHTYPE_HASH(2) /* TCPv4 4-tuple */ 334 #define M_HASHTYPE_RSS_IPV6 M_HASHTYPE_HASH(3) /* IPv6 2-tuple */ 335 #define M_HASHTYPE_RSS_TCP_IPV6 M_HASHTYPE_HASH(4) /* TCPv6 4-tuple */ 336 #define M_HASHTYPE_RSS_IPV6_EX M_HASHTYPE_HASH(5) /* IPv6 2-tuple + 337 * ext hdrs */ 338 #define M_HASHTYPE_RSS_TCP_IPV6_EX M_HASHTYPE_HASH(6) /* TCPv6 4-tiple + 339 * ext hdrs */ 340 /* Non-standard RSS hash types */ 341 #define M_HASHTYPE_RSS_UDP_IPV4 M_HASHTYPE_HASH(7) /* IPv4 UDP 4-tuple*/ 342 #define M_HASHTYPE_RSS_UDP_IPV4_EX M_HASHTYPE_HASH(8) /* IPv4 UDP 4-tuple + 343 * ext hdrs */ 344 #define M_HASHTYPE_RSS_UDP_IPV6 M_HASHTYPE_HASH(9) /* IPv6 UDP 4-tuple*/ 345 #define M_HASHTYPE_RSS_UDP_IPV6_EX M_HASHTYPE_HASH(10)/* IPv6 UDP 4-tuple + 346 * ext hdrs */ 347 348 #define M_HASHTYPE_OPAQUE 63 /* ordering, not affinity */ 349 #define M_HASHTYPE_OPAQUE_HASH M_HASHTYPE_HASH(M_HASHTYPE_OPAQUE) 350 /* ordering+hash, not affinity*/ 351 352 #define M_HASHTYPE_CLEAR(m) ((m)->m_pkthdr.rsstype = 0) 353 #define M_HASHTYPE_GET(m) ((m)->m_pkthdr.rsstype) 354 #define M_HASHTYPE_SET(m, v) ((m)->m_pkthdr.rsstype = (v)) 355 #define M_HASHTYPE_TEST(m, v) (M_HASHTYPE_GET(m) == (v)) 356 #define M_HASHTYPE_ISHASH(m) (M_HASHTYPE_GET(m) & M_HASHTYPE_HASHPROP) 357 358 /* 359 * COS/QOS class and quality of service tags. 360 * It uses DSCP code points as base. 361 */ 362 #define QOS_DSCP_CS0 0x00 363 #define QOS_DSCP_DEF QOS_DSCP_CS0 364 #define QOS_DSCP_CS1 0x20 365 #define QOS_DSCP_AF11 0x28 366 #define QOS_DSCP_AF12 0x30 367 #define QOS_DSCP_AF13 0x38 368 #define QOS_DSCP_CS2 0x40 369 #define QOS_DSCP_AF21 0x48 370 #define QOS_DSCP_AF22 0x50 371 #define QOS_DSCP_AF23 0x58 372 #define QOS_DSCP_CS3 0x60 373 #define QOS_DSCP_AF31 0x68 374 #define QOS_DSCP_AF32 0x70 375 #define QOS_DSCP_AF33 0x78 376 #define QOS_DSCP_CS4 0x80 377 #define QOS_DSCP_AF41 0x88 378 #define QOS_DSCP_AF42 0x90 379 #define QOS_DSCP_AF43 0x98 380 #define QOS_DSCP_CS5 0xa0 381 #define QOS_DSCP_EF 0xb8 382 #define QOS_DSCP_CS6 0xc0 383 #define QOS_DSCP_CS7 0xe0 384 385 /* 386 * External mbuf storage buffer types. 387 */ 388 #define EXT_CLUSTER 1 /* mbuf cluster */ 389 #define EXT_SFBUF 2 /* sendfile(2)'s sf_buf */ 390 #define EXT_JUMBOP 3 /* jumbo cluster page sized */ 391 #define EXT_JUMBO9 4 /* jumbo cluster 9216 bytes */ 392 #define EXT_JUMBO16 5 /* jumbo cluster 16184 bytes */ 393 #define EXT_PACKET 6 /* mbuf+cluster from packet zone */ 394 #define EXT_MBUF 7 /* external mbuf reference */ 395 #define EXT_SFBUF_NOCACHE 8 /* sendfile(2)'s sf_buf not to be cached */ 396 397 #define EXT_VENDOR1 224 /* for vendor-internal use */ 398 #define EXT_VENDOR2 225 /* for vendor-internal use */ 399 #define EXT_VENDOR3 226 /* for vendor-internal use */ 400 #define EXT_VENDOR4 227 /* for vendor-internal use */ 401 402 #define EXT_EXP1 244 /* for experimental use */ 403 #define EXT_EXP2 245 /* for experimental use */ 404 #define EXT_EXP3 246 /* for experimental use */ 405 #define EXT_EXP4 247 /* for experimental use */ 406 407 #define EXT_NET_DRV 252 /* custom ext_buf provided by net driver(s) */ 408 #define EXT_MOD_TYPE 253 /* custom module's ext_buf type */ 409 #define EXT_DISPOSABLE 254 /* can throw this buffer away w/page flipping */ 410 #define EXT_EXTREF 255 /* has externally maintained ext_cnt ptr */ 411 412 /* 413 * Flags for external mbuf buffer types. 414 * NB: limited to the lower 24 bits. 415 */ 416 #define EXT_FLAG_EMBREF 0x000001 /* embedded ext_count */ 417 #define EXT_FLAG_EXTREF 0x000002 /* external ext_cnt, notyet */ 418 419 #define EXT_FLAG_NOFREE 0x000010 /* don't free mbuf to pool, notyet */ 420 421 #define EXT_FLAG_VENDOR1 0x010000 /* for vendor-internal use */ 422 #define EXT_FLAG_VENDOR2 0x020000 /* for vendor-internal use */ 423 #define EXT_FLAG_VENDOR3 0x040000 /* for vendor-internal use */ 424 #define EXT_FLAG_VENDOR4 0x080000 /* for vendor-internal use */ 425 426 #define EXT_FLAG_EXP1 0x100000 /* for experimental use */ 427 #define EXT_FLAG_EXP2 0x200000 /* for experimental use */ 428 #define EXT_FLAG_EXP3 0x400000 /* for experimental use */ 429 #define EXT_FLAG_EXP4 0x800000 /* for experimental use */ 430 431 /* 432 * EXT flag description for use with printf(9) %b identifier. 433 */ 434 #define EXT_FLAG_BITS \ 435 "\20\1EXT_FLAG_EMBREF\2EXT_FLAG_EXTREF\5EXT_FLAG_NOFREE" \ 436 "\21EXT_FLAG_VENDOR1\22EXT_FLAG_VENDOR2\23EXT_FLAG_VENDOR3" \ 437 "\24EXT_FLAG_VENDOR4\25EXT_FLAG_EXP1\26EXT_FLAG_EXP2\27EXT_FLAG_EXP3" \ 438 "\30EXT_FLAG_EXP4" 439 440 /* 441 * External reference/free functions. 442 */ 443 void sf_ext_free(void *, void *); 444 void sf_ext_free_nocache(void *, void *); 445 446 /* 447 * Flags indicating checksum, segmentation and other offload work to be 448 * done, or already done, by hardware or lower layers. It is split into 449 * separate inbound and outbound flags. 450 * 451 * Outbound flags that are set by upper protocol layers requesting lower 452 * layers, or ideally the hardware, to perform these offloading tasks. 453 * For outbound packets this field and its flags can be directly tested 454 * against ifnet if_hwassist. 455 */ 456 #define CSUM_IP 0x00000001 /* IP header checksum offload */ 457 #define CSUM_IP_UDP 0x00000002 /* UDP checksum offload */ 458 #define CSUM_IP_TCP 0x00000004 /* TCP checksum offload */ 459 #define CSUM_IP_SCTP 0x00000008 /* SCTP checksum offload */ 460 #define CSUM_IP_TSO 0x00000010 /* TCP segmentation offload */ 461 #define CSUM_IP_ISCSI 0x00000020 /* iSCSI checksum offload */ 462 463 #define CSUM_IP6_UDP 0x00000200 /* UDP checksum offload */ 464 #define CSUM_IP6_TCP 0x00000400 /* TCP checksum offload */ 465 #define CSUM_IP6_SCTP 0x00000800 /* SCTP checksum offload */ 466 #define CSUM_IP6_TSO 0x00001000 /* TCP segmentation offload */ 467 #define CSUM_IP6_ISCSI 0x00002000 /* iSCSI checksum offload */ 468 469 /* Inbound checksum support where the checksum was verified by hardware. */ 470 #define CSUM_L3_CALC 0x01000000 /* calculated layer 3 csum */ 471 #define CSUM_L3_VALID 0x02000000 /* checksum is correct */ 472 #define CSUM_L4_CALC 0x04000000 /* calculated layer 4 csum */ 473 #define CSUM_L4_VALID 0x08000000 /* checksum is correct */ 474 #define CSUM_L5_CALC 0x10000000 /* calculated layer 5 csum */ 475 #define CSUM_L5_VALID 0x20000000 /* checksum is correct */ 476 #define CSUM_COALESED 0x40000000 /* contains merged segments */ 477 478 /* 479 * CSUM flag description for use with printf(9) %b identifier. 480 */ 481 #define CSUM_BITS \ 482 "\20\1CSUM_IP\2CSUM_IP_UDP\3CSUM_IP_TCP\4CSUM_IP_SCTP\5CSUM_IP_TSO" \ 483 "\6CSUM_IP_ISCSI" \ 484 "\12CSUM_IP6_UDP\13CSUM_IP6_TCP\14CSUM_IP6_SCTP\15CSUM_IP6_TSO" \ 485 "\16CSUM_IP6_ISCSI" \ 486 "\31CSUM_L3_CALC\32CSUM_L3_VALID\33CSUM_L4_CALC\34CSUM_L4_VALID" \ 487 "\35CSUM_L5_CALC\36CSUM_L5_VALID\37CSUM_COALESED" 488 489 /* CSUM flags compatibility mappings. */ 490 #define CSUM_IP_CHECKED CSUM_L3_CALC 491 #define CSUM_IP_VALID CSUM_L3_VALID 492 #define CSUM_DATA_VALID CSUM_L4_VALID 493 #define CSUM_PSEUDO_HDR CSUM_L4_CALC 494 #define CSUM_SCTP_VALID CSUM_L4_VALID 495 #define CSUM_DELAY_DATA (CSUM_TCP|CSUM_UDP) 496 #define CSUM_DELAY_IP CSUM_IP /* Only v4, no v6 IP hdr csum */ 497 #define CSUM_DELAY_DATA_IPV6 (CSUM_TCP_IPV6|CSUM_UDP_IPV6) 498 #define CSUM_DATA_VALID_IPV6 CSUM_DATA_VALID 499 #define CSUM_TCP CSUM_IP_TCP 500 #define CSUM_UDP CSUM_IP_UDP 501 #define CSUM_SCTP CSUM_IP_SCTP 502 #define CSUM_TSO (CSUM_IP_TSO|CSUM_IP6_TSO) 503 #define CSUM_UDP_IPV6 CSUM_IP6_UDP 504 #define CSUM_TCP_IPV6 CSUM_IP6_TCP 505 #define CSUM_SCTP_IPV6 CSUM_IP6_SCTP 506 507 /* 508 * mbuf types describing the content of the mbuf (including external storage). 509 */ 510 #define MT_NOTMBUF 0 /* USED INTERNALLY ONLY! Object is not mbuf */ 511 #define MT_DATA 1 /* dynamic (data) allocation */ 512 #define MT_HEADER MT_DATA /* packet header, use M_PKTHDR instead */ 513 514 #define MT_VENDOR1 4 /* for vendor-internal use */ 515 #define MT_VENDOR2 5 /* for vendor-internal use */ 516 #define MT_VENDOR3 6 /* for vendor-internal use */ 517 #define MT_VENDOR4 7 /* for vendor-internal use */ 518 519 #define MT_SONAME 8 /* socket name */ 520 521 #define MT_EXP1 9 /* for experimental use */ 522 #define MT_EXP2 10 /* for experimental use */ 523 #define MT_EXP3 11 /* for experimental use */ 524 #define MT_EXP4 12 /* for experimental use */ 525 526 #define MT_CONTROL 14 /* extra-data protocol message */ 527 #define MT_OOBDATA 15 /* expedited data */ 528 #define MT_NTYPES 16 /* number of mbuf types for mbtypes[] */ 529 530 #define MT_NOINIT 255 /* Not a type but a flag to allocate 531 a non-initialized mbuf */ 532 533 /* 534 * String names of mbuf-related UMA(9) and malloc(9) types. Exposed to 535 * !_KERNEL so that monitoring tools can look up the zones with 536 * libmemstat(3). 537 */ 538 #define MBUF_MEM_NAME "mbuf" 539 #define MBUF_CLUSTER_MEM_NAME "mbuf_cluster" 540 #define MBUF_PACKET_MEM_NAME "mbuf_packet" 541 #define MBUF_JUMBOP_MEM_NAME "mbuf_jumbo_page" 542 #define MBUF_JUMBO9_MEM_NAME "mbuf_jumbo_9k" 543 #define MBUF_JUMBO16_MEM_NAME "mbuf_jumbo_16k" 544 #define MBUF_TAG_MEM_NAME "mbuf_tag" 545 #define MBUF_EXTREFCNT_MEM_NAME "mbuf_ext_refcnt" 546 547 #ifdef _KERNEL 548 549 #ifdef WITNESS 550 #define MBUF_CHECKSLEEP(how) do { \ 551 if (how == M_WAITOK) \ 552 WITNESS_WARN(WARN_GIANTOK | WARN_SLEEPOK, NULL, \ 553 "Sleeping in \"%s\"", __func__); \ 554 } while (0) 555 #else 556 #define MBUF_CHECKSLEEP(how) 557 #endif 558 559 /* 560 * Network buffer allocation API 561 * 562 * The rest of it is defined in kern/kern_mbuf.c 563 */ 564 extern uma_zone_t zone_mbuf; 565 extern uma_zone_t zone_clust; 566 extern uma_zone_t zone_pack; 567 extern uma_zone_t zone_jumbop; 568 extern uma_zone_t zone_jumbo9; 569 extern uma_zone_t zone_jumbo16; 570 571 void mb_dupcl(struct mbuf *, struct mbuf *); 572 void mb_free_ext(struct mbuf *); 573 void m_adj(struct mbuf *, int); 574 int m_apply(struct mbuf *, int, int, 575 int (*)(void *, void *, u_int), void *); 576 int m_append(struct mbuf *, int, c_caddr_t); 577 void m_cat(struct mbuf *, struct mbuf *); 578 void m_catpkt(struct mbuf *, struct mbuf *); 579 int m_clget(struct mbuf *m, int how); 580 void *m_cljget(struct mbuf *m, int how, int size); 581 struct mbuf *m_collapse(struct mbuf *, int, int); 582 void m_copyback(struct mbuf *, int, int, c_caddr_t); 583 void m_copydata(const struct mbuf *, int, int, caddr_t); 584 struct mbuf *m_copym(struct mbuf *, int, int, int); 585 struct mbuf *m_copypacket(struct mbuf *, int); 586 void m_copy_pkthdr(struct mbuf *, struct mbuf *); 587 struct mbuf *m_copyup(struct mbuf *, int, int); 588 struct mbuf *m_defrag(struct mbuf *, int); 589 void m_demote_pkthdr(struct mbuf *); 590 void m_demote(struct mbuf *, int, int); 591 struct mbuf *m_devget(char *, int, int, struct ifnet *, 592 void (*)(char *, caddr_t, u_int)); 593 struct mbuf *m_dup(const struct mbuf *, int); 594 int m_dup_pkthdr(struct mbuf *, const struct mbuf *, int); 595 void m_extadd(struct mbuf *, caddr_t, u_int, 596 void (*)(struct mbuf *, void *, void *), void *, void *, 597 int, int); 598 u_int m_fixhdr(struct mbuf *); 599 struct mbuf *m_fragment(struct mbuf *, int, int); 600 void m_freem(struct mbuf *); 601 struct mbuf *m_get2(int, int, short, int); 602 struct mbuf *m_getjcl(int, short, int, int); 603 struct mbuf *m_getm2(struct mbuf *, int, int, short, int); 604 struct mbuf *m_getptr(struct mbuf *, int, int *); 605 u_int m_length(struct mbuf *, struct mbuf **); 606 int m_mbuftouio(struct uio *, struct mbuf *, int); 607 void m_move_pkthdr(struct mbuf *, struct mbuf *); 608 int m_pkthdr_init(struct mbuf *, int); 609 struct mbuf *m_prepend(struct mbuf *, int, int); 610 void m_print(const struct mbuf *, int); 611 struct mbuf *m_pulldown(struct mbuf *, int, int, int *); 612 struct mbuf *m_pullup(struct mbuf *, int); 613 int m_sanity(struct mbuf *, int); 614 struct mbuf *m_split(struct mbuf *, int, int); 615 struct mbuf *m_uiotombuf(struct uio *, int, int, int, int); 616 struct mbuf *m_unshare(struct mbuf *, int); 617 618 static __inline int 619 m_gettype(int size) 620 { 621 int type; 622 623 switch (size) { 624 case MSIZE: 625 type = EXT_MBUF; 626 break; 627 case MCLBYTES: 628 type = EXT_CLUSTER; 629 break; 630 #if MJUMPAGESIZE != MCLBYTES 631 case MJUMPAGESIZE: 632 type = EXT_JUMBOP; 633 break; 634 #endif 635 case MJUM9BYTES: 636 type = EXT_JUMBO9; 637 break; 638 case MJUM16BYTES: 639 type = EXT_JUMBO16; 640 break; 641 default: 642 panic("%s: invalid cluster size %d", __func__, size); 643 } 644 645 return (type); 646 } 647 648 /* 649 * Associated an external reference counted buffer with an mbuf. 650 */ 651 static __inline void 652 m_extaddref(struct mbuf *m, caddr_t buf, u_int size, u_int *ref_cnt, 653 void (*freef)(struct mbuf *, void *, void *), void *arg1, void *arg2) 654 { 655 656 KASSERT(ref_cnt != NULL, ("%s: ref_cnt not provided", __func__)); 657 658 atomic_add_int(ref_cnt, 1); 659 m->m_flags |= M_EXT; 660 m->m_ext.ext_buf = buf; 661 m->m_ext.ext_cnt = ref_cnt; 662 m->m_data = m->m_ext.ext_buf; 663 m->m_ext.ext_size = size; 664 m->m_ext.ext_free = freef; 665 m->m_ext.ext_arg1 = arg1; 666 m->m_ext.ext_arg2 = arg2; 667 m->m_ext.ext_type = EXT_EXTREF; 668 m->m_ext.ext_flags = 0; 669 } 670 671 static __inline uma_zone_t 672 m_getzone(int size) 673 { 674 uma_zone_t zone; 675 676 switch (size) { 677 case MCLBYTES: 678 zone = zone_clust; 679 break; 680 #if MJUMPAGESIZE != MCLBYTES 681 case MJUMPAGESIZE: 682 zone = zone_jumbop; 683 break; 684 #endif 685 case MJUM9BYTES: 686 zone = zone_jumbo9; 687 break; 688 case MJUM16BYTES: 689 zone = zone_jumbo16; 690 break; 691 default: 692 panic("%s: invalid cluster size %d", __func__, size); 693 } 694 695 return (zone); 696 } 697 698 /* 699 * Initialize an mbuf with linear storage. 700 * 701 * Inline because the consumer text overhead will be roughly the same to 702 * initialize or call a function with this many parameters and M_PKTHDR 703 * should go away with constant propagation for !MGETHDR. 704 */ 705 static __inline int 706 m_init(struct mbuf *m, int how, short type, int flags) 707 { 708 int error; 709 710 m->m_next = NULL; 711 m->m_nextpkt = NULL; 712 m->m_data = m->m_dat; 713 m->m_len = 0; 714 m->m_flags = flags; 715 m->m_type = type; 716 if (flags & M_PKTHDR) 717 error = m_pkthdr_init(m, how); 718 else 719 error = 0; 720 721 MBUF_PROBE5(m__init, m, how, type, flags, error); 722 return (error); 723 } 724 725 static __inline struct mbuf * 726 m_get(int how, short type) 727 { 728 struct mbuf *m; 729 struct mb_args args; 730 731 args.flags = 0; 732 args.type = type; 733 m = uma_zalloc_arg(zone_mbuf, &args, how); 734 MBUF_PROBE3(m__get, how, type, m); 735 return (m); 736 } 737 738 static __inline struct mbuf * 739 m_gethdr(int how, short type) 740 { 741 struct mbuf *m; 742 struct mb_args args; 743 744 args.flags = M_PKTHDR; 745 args.type = type; 746 m = uma_zalloc_arg(zone_mbuf, &args, how); 747 MBUF_PROBE3(m__gethdr, how, type, m); 748 return (m); 749 } 750 751 static __inline struct mbuf * 752 m_getcl(int how, short type, int flags) 753 { 754 struct mbuf *m; 755 struct mb_args args; 756 757 args.flags = flags; 758 args.type = type; 759 m = uma_zalloc_arg(zone_pack, &args, how); 760 MBUF_PROBE4(m__getcl, how, type, flags, m); 761 return (m); 762 } 763 764 /* 765 * XXX: m_cljset() is a dangerous API. One must attach only a new, 766 * unreferenced cluster to an mbuf(9). It is not possible to assert 767 * that, so care can be taken only by users of the API. 768 */ 769 static __inline void 770 m_cljset(struct mbuf *m, void *cl, int type) 771 { 772 int size; 773 774 switch (type) { 775 case EXT_CLUSTER: 776 size = MCLBYTES; 777 break; 778 #if MJUMPAGESIZE != MCLBYTES 779 case EXT_JUMBOP: 780 size = MJUMPAGESIZE; 781 break; 782 #endif 783 case EXT_JUMBO9: 784 size = MJUM9BYTES; 785 break; 786 case EXT_JUMBO16: 787 size = MJUM16BYTES; 788 break; 789 default: 790 panic("%s: unknown cluster type %d", __func__, type); 791 break; 792 } 793 794 m->m_data = m->m_ext.ext_buf = cl; 795 m->m_ext.ext_free = m->m_ext.ext_arg1 = m->m_ext.ext_arg2 = NULL; 796 m->m_ext.ext_size = size; 797 m->m_ext.ext_type = type; 798 m->m_ext.ext_flags = EXT_FLAG_EMBREF; 799 m->m_ext.ext_count = 1; 800 m->m_flags |= M_EXT; 801 MBUF_PROBE3(m__cljset, m, cl, type); 802 } 803 804 static __inline void 805 m_chtype(struct mbuf *m, short new_type) 806 { 807 808 m->m_type = new_type; 809 } 810 811 static __inline void 812 m_clrprotoflags(struct mbuf *m) 813 { 814 815 while (m) { 816 m->m_flags &= ~M_PROTOFLAGS; 817 m = m->m_next; 818 } 819 } 820 821 static __inline struct mbuf * 822 m_last(struct mbuf *m) 823 { 824 825 while (m->m_next) 826 m = m->m_next; 827 return (m); 828 } 829 830 static inline u_int 831 m_extrefcnt(struct mbuf *m) 832 { 833 834 KASSERT(m->m_flags & M_EXT, ("%s: M_EXT missing", __func__)); 835 836 return ((m->m_ext.ext_flags & EXT_FLAG_EMBREF) ? m->m_ext.ext_count : 837 *m->m_ext.ext_cnt); 838 } 839 840 /* 841 * mbuf, cluster, and external object allocation macros (for compatibility 842 * purposes). 843 */ 844 #define M_MOVE_PKTHDR(to, from) m_move_pkthdr((to), (from)) 845 #define MGET(m, how, type) ((m) = m_get((how), (type))) 846 #define MGETHDR(m, how, type) ((m) = m_gethdr((how), (type))) 847 #define MCLGET(m, how) m_clget((m), (how)) 848 #define MEXTADD(m, buf, size, free, arg1, arg2, flags, type) \ 849 m_extadd((m), (caddr_t)(buf), (size), (free), (arg1), (arg2), \ 850 (flags), (type)) 851 #define m_getm(m, len, how, type) \ 852 m_getm2((m), (len), (how), (type), M_PKTHDR) 853 854 /* 855 * Evaluate TRUE if it's safe to write to the mbuf m's data region (this can 856 * be both the local data payload, or an external buffer area, depending on 857 * whether M_EXT is set). 858 */ 859 #define M_WRITABLE(m) (!((m)->m_flags & M_RDONLY) && \ 860 (!(((m)->m_flags & M_EXT)) || \ 861 (m_extrefcnt(m) == 1))) 862 863 /* Check if the supplied mbuf has a packet header, or else panic. */ 864 #define M_ASSERTPKTHDR(m) \ 865 KASSERT((m) != NULL && (m)->m_flags & M_PKTHDR, \ 866 ("%s: no mbuf packet header!", __func__)) 867 868 /* 869 * Ensure that the supplied mbuf is a valid, non-free mbuf. 870 * 871 * XXX: Broken at the moment. Need some UMA magic to make it work again. 872 */ 873 #define M_ASSERTVALID(m) \ 874 KASSERT((((struct mbuf *)m)->m_flags & 0) == 0, \ 875 ("%s: attempted use of a free mbuf!", __func__)) 876 877 /* 878 * Return the address of the start of the buffer associated with an mbuf, 879 * handling external storage, packet-header mbufs, and regular data mbufs. 880 */ 881 #define M_START(m) \ 882 (((m)->m_flags & M_EXT) ? (m)->m_ext.ext_buf : \ 883 ((m)->m_flags & M_PKTHDR) ? &(m)->m_pktdat[0] : \ 884 &(m)->m_dat[0]) 885 886 /* 887 * Return the size of the buffer associated with an mbuf, handling external 888 * storage, packet-header mbufs, and regular data mbufs. 889 */ 890 #define M_SIZE(m) \ 891 (((m)->m_flags & M_EXT) ? (m)->m_ext.ext_size : \ 892 ((m)->m_flags & M_PKTHDR) ? MHLEN : \ 893 MLEN) 894 895 /* 896 * Set the m_data pointer of a newly allocated mbuf to place an object of the 897 * specified size at the end of the mbuf, longword aligned. 898 * 899 * NB: Historically, we had M_ALIGN(), MH_ALIGN(), and MEXT_ALIGN() as 900 * separate macros, each asserting that it was called at the proper moment. 901 * This required callers to themselves test the storage type and call the 902 * right one. Rather than require callers to be aware of those layout 903 * decisions, we centralize here. 904 */ 905 static __inline void 906 m_align(struct mbuf *m, int len) 907 { 908 #ifdef INVARIANTS 909 const char *msg = "%s: not a virgin mbuf"; 910 #endif 911 int adjust; 912 913 KASSERT(m->m_data == M_START(m), (msg, __func__)); 914 915 adjust = M_SIZE(m) - len; 916 m->m_data += adjust &~ (sizeof(long)-1); 917 } 918 919 #define M_ALIGN(m, len) m_align(m, len) 920 #define MH_ALIGN(m, len) m_align(m, len) 921 #define MEXT_ALIGN(m, len) m_align(m, len) 922 923 /* 924 * Compute the amount of space available before the current start of data in 925 * an mbuf. 926 * 927 * The M_WRITABLE() is a temporary, conservative safety measure: the burden 928 * of checking writability of the mbuf data area rests solely with the caller. 929 * 930 * NB: In previous versions, M_LEADINGSPACE() would only check M_WRITABLE() 931 * for mbufs with external storage. We now allow mbuf-embedded data to be 932 * read-only as well. 933 */ 934 #define M_LEADINGSPACE(m) \ 935 (M_WRITABLE(m) ? ((m)->m_data - M_START(m)) : 0) 936 937 /* 938 * Compute the amount of space available after the end of data in an mbuf. 939 * 940 * The M_WRITABLE() is a temporary, conservative safety measure: the burden 941 * of checking writability of the mbuf data area rests solely with the caller. 942 * 943 * NB: In previous versions, M_TRAILINGSPACE() would only check M_WRITABLE() 944 * for mbufs with external storage. We now allow mbuf-embedded data to be 945 * read-only as well. 946 */ 947 #define M_TRAILINGSPACE(m) \ 948 (M_WRITABLE(m) ? \ 949 ((M_START(m) + M_SIZE(m)) - ((m)->m_data + (m)->m_len)) : 0) 950 951 /* 952 * Arrange to prepend space of size plen to mbuf m. If a new mbuf must be 953 * allocated, how specifies whether to wait. If the allocation fails, the 954 * original mbuf chain is freed and m is set to NULL. 955 */ 956 #define M_PREPEND(m, plen, how) do { \ 957 struct mbuf **_mmp = &(m); \ 958 struct mbuf *_mm = *_mmp; \ 959 int _mplen = (plen); \ 960 int __mhow = (how); \ 961 \ 962 MBUF_CHECKSLEEP(how); \ 963 if (M_LEADINGSPACE(_mm) >= _mplen) { \ 964 _mm->m_data -= _mplen; \ 965 _mm->m_len += _mplen; \ 966 } else \ 967 _mm = m_prepend(_mm, _mplen, __mhow); \ 968 if (_mm != NULL && _mm->m_flags & M_PKTHDR) \ 969 _mm->m_pkthdr.len += _mplen; \ 970 *_mmp = _mm; \ 971 } while (0) 972 973 /* 974 * Change mbuf to new type. This is a relatively expensive operation and 975 * should be avoided. 976 */ 977 #define MCHTYPE(m, t) m_chtype((m), (t)) 978 979 /* Length to m_copy to copy all. */ 980 #define M_COPYALL 1000000000 981 982 /* Compatibility with 4.3. */ 983 #define m_copy(m, o, l) m_copym((m), (o), (l), M_NOWAIT) 984 985 extern int max_datalen; /* MHLEN - max_hdr */ 986 extern int max_hdr; /* Largest link + protocol header */ 987 extern int max_linkhdr; /* Largest link-level header */ 988 extern int max_protohdr; /* Largest protocol header */ 989 extern int nmbclusters; /* Maximum number of clusters */ 990 991 /*- 992 * Network packets may have annotations attached by affixing a list of 993 * "packet tags" to the pkthdr structure. Packet tags are dynamically 994 * allocated semi-opaque data structures that have a fixed header 995 * (struct m_tag) that specifies the size of the memory block and a 996 * <cookie,type> pair that identifies it. The cookie is a 32-bit unique 997 * unsigned value used to identify a module or ABI. By convention this value 998 * is chosen as the date+time that the module is created, expressed as the 999 * number of seconds since the epoch (e.g., using date -u +'%s'). The type 1000 * value is an ABI/module-specific value that identifies a particular 1001 * annotation and is private to the module. For compatibility with systems 1002 * like OpenBSD that define packet tags w/o an ABI/module cookie, the value 1003 * PACKET_ABI_COMPAT is used to implement m_tag_get and m_tag_find 1004 * compatibility shim functions and several tag types are defined below. 1005 * Users that do not require compatibility should use a private cookie value 1006 * so that packet tag-related definitions can be maintained privately. 1007 * 1008 * Note that the packet tag returned by m_tag_alloc has the default memory 1009 * alignment implemented by malloc. To reference private data one can use a 1010 * construct like: 1011 * 1012 * struct m_tag *mtag = m_tag_alloc(...); 1013 * struct foo *p = (struct foo *)(mtag+1); 1014 * 1015 * if the alignment of struct m_tag is sufficient for referencing members of 1016 * struct foo. Otherwise it is necessary to embed struct m_tag within the 1017 * private data structure to insure proper alignment; e.g., 1018 * 1019 * struct foo { 1020 * struct m_tag tag; 1021 * ... 1022 * }; 1023 * struct foo *p = (struct foo *) m_tag_alloc(...); 1024 * struct m_tag *mtag = &p->tag; 1025 */ 1026 1027 /* 1028 * Persistent tags stay with an mbuf until the mbuf is reclaimed. Otherwise 1029 * tags are expected to ``vanish'' when they pass through a network 1030 * interface. For most interfaces this happens normally as the tags are 1031 * reclaimed when the mbuf is free'd. However in some special cases 1032 * reclaiming must be done manually. An example is packets that pass through 1033 * the loopback interface. Also, one must be careful to do this when 1034 * ``turning around'' packets (e.g., icmp_reflect). 1035 * 1036 * To mark a tag persistent bit-or this flag in when defining the tag id. 1037 * The tag will then be treated as described above. 1038 */ 1039 #define MTAG_PERSISTENT 0x800 1040 1041 #define PACKET_TAG_NONE 0 /* Nadda */ 1042 1043 /* Packet tags for use with PACKET_ABI_COMPAT. */ 1044 #define PACKET_TAG_IPSEC_IN_DONE 1 /* IPsec applied, in */ 1045 #define PACKET_TAG_IPSEC_OUT_DONE 2 /* IPsec applied, out */ 1046 #define PACKET_TAG_IPSEC_IN_CRYPTO_DONE 3 /* NIC IPsec crypto done */ 1047 #define PACKET_TAG_IPSEC_OUT_CRYPTO_NEEDED 4 /* NIC IPsec crypto req'ed */ 1048 #define PACKET_TAG_IPSEC_IN_COULD_DO_CRYPTO 5 /* NIC notifies IPsec */ 1049 #define PACKET_TAG_IPSEC_PENDING_TDB 6 /* Reminder to do IPsec */ 1050 #define PACKET_TAG_BRIDGE 7 /* Bridge processing done */ 1051 #define PACKET_TAG_GIF 8 /* GIF processing done */ 1052 #define PACKET_TAG_GRE 9 /* GRE processing done */ 1053 #define PACKET_TAG_IN_PACKET_CHECKSUM 10 /* NIC checksumming done */ 1054 #define PACKET_TAG_ENCAP 11 /* Encap. processing */ 1055 #define PACKET_TAG_IPSEC_SOCKET 12 /* IPSEC socket ref */ 1056 #define PACKET_TAG_IPSEC_HISTORY 13 /* IPSEC history */ 1057 #define PACKET_TAG_IPV6_INPUT 14 /* IPV6 input processing */ 1058 #define PACKET_TAG_DUMMYNET 15 /* dummynet info */ 1059 #define PACKET_TAG_DIVERT 17 /* divert info */ 1060 #define PACKET_TAG_IPFORWARD 18 /* ipforward info */ 1061 #define PACKET_TAG_MACLABEL (19 | MTAG_PERSISTENT) /* MAC label */ 1062 #define PACKET_TAG_PF (21 | MTAG_PERSISTENT) /* PF/ALTQ information */ 1063 #define PACKET_TAG_RTSOCKFAM 25 /* rtsock sa family */ 1064 #define PACKET_TAG_IPOPTIONS 27 /* Saved IP options */ 1065 #define PACKET_TAG_CARP 28 /* CARP info */ 1066 #define PACKET_TAG_IPSEC_NAT_T_PORTS 29 /* two uint16_t */ 1067 #define PACKET_TAG_ND_OUTGOING 30 /* ND outgoing */ 1068 1069 /* Specific cookies and tags. */ 1070 1071 /* Packet tag routines. */ 1072 struct m_tag *m_tag_alloc(u_int32_t, int, int, int); 1073 void m_tag_delete(struct mbuf *, struct m_tag *); 1074 void m_tag_delete_chain(struct mbuf *, struct m_tag *); 1075 void m_tag_free_default(struct m_tag *); 1076 struct m_tag *m_tag_locate(struct mbuf *, u_int32_t, int, struct m_tag *); 1077 struct m_tag *m_tag_copy(struct m_tag *, int); 1078 int m_tag_copy_chain(struct mbuf *, const struct mbuf *, int); 1079 void m_tag_delete_nonpersistent(struct mbuf *); 1080 1081 /* 1082 * Initialize the list of tags associated with an mbuf. 1083 */ 1084 static __inline void 1085 m_tag_init(struct mbuf *m) 1086 { 1087 1088 SLIST_INIT(&m->m_pkthdr.tags); 1089 } 1090 1091 /* 1092 * Set up the contents of a tag. Note that this does not fill in the free 1093 * method; the caller is expected to do that. 1094 * 1095 * XXX probably should be called m_tag_init, but that was already taken. 1096 */ 1097 static __inline void 1098 m_tag_setup(struct m_tag *t, u_int32_t cookie, int type, int len) 1099 { 1100 1101 t->m_tag_id = type; 1102 t->m_tag_len = len; 1103 t->m_tag_cookie = cookie; 1104 } 1105 1106 /* 1107 * Reclaim resources associated with a tag. 1108 */ 1109 static __inline void 1110 m_tag_free(struct m_tag *t) 1111 { 1112 1113 (*t->m_tag_free)(t); 1114 } 1115 1116 /* 1117 * Return the first tag associated with an mbuf. 1118 */ 1119 static __inline struct m_tag * 1120 m_tag_first(struct mbuf *m) 1121 { 1122 1123 return (SLIST_FIRST(&m->m_pkthdr.tags)); 1124 } 1125 1126 /* 1127 * Return the next tag in the list of tags associated with an mbuf. 1128 */ 1129 static __inline struct m_tag * 1130 m_tag_next(struct mbuf *m __unused, struct m_tag *t) 1131 { 1132 1133 return (SLIST_NEXT(t, m_tag_link)); 1134 } 1135 1136 /* 1137 * Prepend a tag to the list of tags associated with an mbuf. 1138 */ 1139 static __inline void 1140 m_tag_prepend(struct mbuf *m, struct m_tag *t) 1141 { 1142 1143 SLIST_INSERT_HEAD(&m->m_pkthdr.tags, t, m_tag_link); 1144 } 1145 1146 /* 1147 * Unlink a tag from the list of tags associated with an mbuf. 1148 */ 1149 static __inline void 1150 m_tag_unlink(struct mbuf *m, struct m_tag *t) 1151 { 1152 1153 SLIST_REMOVE(&m->m_pkthdr.tags, t, m_tag, m_tag_link); 1154 } 1155 1156 /* These are for OpenBSD compatibility. */ 1157 #define MTAG_ABI_COMPAT 0 /* compatibility ABI */ 1158 1159 static __inline struct m_tag * 1160 m_tag_get(int type, int length, int wait) 1161 { 1162 return (m_tag_alloc(MTAG_ABI_COMPAT, type, length, wait)); 1163 } 1164 1165 static __inline struct m_tag * 1166 m_tag_find(struct mbuf *m, int type, struct m_tag *start) 1167 { 1168 return (SLIST_EMPTY(&m->m_pkthdr.tags) ? (struct m_tag *)NULL : 1169 m_tag_locate(m, MTAG_ABI_COMPAT, type, start)); 1170 } 1171 1172 static __inline struct mbuf * 1173 m_free(struct mbuf *m) 1174 { 1175 struct mbuf *n = m->m_next; 1176 1177 MBUF_PROBE1(m__free, m); 1178 if ((m->m_flags & (M_PKTHDR|M_NOFREE)) == (M_PKTHDR|M_NOFREE)) 1179 m_tag_delete_chain(m, NULL); 1180 if (m->m_flags & M_EXT) 1181 mb_free_ext(m); 1182 else if ((m->m_flags & M_NOFREE) == 0) 1183 uma_zfree(zone_mbuf, m); 1184 return (n); 1185 } 1186 1187 static __inline int 1188 rt_m_getfib(struct mbuf *m) 1189 { 1190 KASSERT(m->m_flags & M_PKTHDR , ("Attempt to get FIB from non header mbuf.")); 1191 return (m->m_pkthdr.fibnum); 1192 } 1193 1194 #define M_GETFIB(_m) rt_m_getfib(_m) 1195 1196 #define M_SETFIB(_m, _fib) do { \ 1197 KASSERT((_m)->m_flags & M_PKTHDR, ("Attempt to set FIB on non header mbuf.")); \ 1198 ((_m)->m_pkthdr.fibnum) = (_fib); \ 1199 } while (0) 1200 1201 /* flags passed as first argument for "m_ether_tcpip_hash()" */ 1202 #define MBUF_HASHFLAG_L2 (1 << 2) 1203 #define MBUF_HASHFLAG_L3 (1 << 3) 1204 #define MBUF_HASHFLAG_L4 (1 << 4) 1205 1206 /* mbuf hashing helper routines */ 1207 uint32_t m_ether_tcpip_hash_init(void); 1208 uint32_t m_ether_tcpip_hash(const uint32_t, const struct mbuf *, const uint32_t); 1209 1210 #ifdef MBUF_PROFILING 1211 void m_profile(struct mbuf *m); 1212 #define M_PROFILE(m) m_profile(m) 1213 #else 1214 #define M_PROFILE(m) 1215 #endif 1216 1217 struct mbufq { 1218 STAILQ_HEAD(, mbuf) mq_head; 1219 int mq_len; 1220 int mq_maxlen; 1221 }; 1222 1223 static inline void 1224 mbufq_init(struct mbufq *mq, int maxlen) 1225 { 1226 1227 STAILQ_INIT(&mq->mq_head); 1228 mq->mq_maxlen = maxlen; 1229 mq->mq_len = 0; 1230 } 1231 1232 static inline struct mbuf * 1233 mbufq_flush(struct mbufq *mq) 1234 { 1235 struct mbuf *m; 1236 1237 m = STAILQ_FIRST(&mq->mq_head); 1238 STAILQ_INIT(&mq->mq_head); 1239 mq->mq_len = 0; 1240 return (m); 1241 } 1242 1243 static inline void 1244 mbufq_drain(struct mbufq *mq) 1245 { 1246 struct mbuf *m, *n; 1247 1248 n = mbufq_flush(mq); 1249 while ((m = n) != NULL) { 1250 n = STAILQ_NEXT(m, m_stailqpkt); 1251 m_freem(m); 1252 } 1253 } 1254 1255 static inline struct mbuf * 1256 mbufq_first(const struct mbufq *mq) 1257 { 1258 1259 return (STAILQ_FIRST(&mq->mq_head)); 1260 } 1261 1262 static inline struct mbuf * 1263 mbufq_last(const struct mbufq *mq) 1264 { 1265 1266 return (STAILQ_LAST(&mq->mq_head, mbuf, m_stailqpkt)); 1267 } 1268 1269 static inline int 1270 mbufq_full(const struct mbufq *mq) 1271 { 1272 1273 return (mq->mq_len >= mq->mq_maxlen); 1274 } 1275 1276 static inline int 1277 mbufq_len(const struct mbufq *mq) 1278 { 1279 1280 return (mq->mq_len); 1281 } 1282 1283 static inline int 1284 mbufq_enqueue(struct mbufq *mq, struct mbuf *m) 1285 { 1286 1287 if (mbufq_full(mq)) 1288 return (ENOBUFS); 1289 STAILQ_INSERT_TAIL(&mq->mq_head, m, m_stailqpkt); 1290 mq->mq_len++; 1291 return (0); 1292 } 1293 1294 static inline struct mbuf * 1295 mbufq_dequeue(struct mbufq *mq) 1296 { 1297 struct mbuf *m; 1298 1299 m = STAILQ_FIRST(&mq->mq_head); 1300 if (m) { 1301 STAILQ_REMOVE_HEAD(&mq->mq_head, m_stailqpkt); 1302 m->m_nextpkt = NULL; 1303 mq->mq_len--; 1304 } 1305 return (m); 1306 } 1307 1308 static inline void 1309 mbufq_prepend(struct mbufq *mq, struct mbuf *m) 1310 { 1311 1312 STAILQ_INSERT_HEAD(&mq->mq_head, m, m_stailqpkt); 1313 mq->mq_len++; 1314 } 1315 #endif /* _KERNEL */ 1316 #endif /* !_SYS_MBUF_H_ */ 1317