1 /*- 2 * SPDX-License-Identifier: BSD-3-Clause 3 * 4 * Copyright (c) 1982, 1986, 1988, 1993 5 * The Regents of the University of California. 6 * All rights reserved. 7 * 8 * Redistribution and use in source and binary forms, with or without 9 * modification, are permitted provided that the following conditions 10 * are met: 11 * 1. Redistributions of source code must retain the above copyright 12 * notice, this list of conditions and the following disclaimer. 13 * 2. Redistributions in binary form must reproduce the above copyright 14 * notice, this list of conditions and the following disclaimer in the 15 * documentation and/or other materials provided with the distribution. 16 * 3. Neither the name of the University nor the names of its contributors 17 * may be used to endorse or promote products derived from this software 18 * without specific prior written permission. 19 * 20 * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND 21 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE 22 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE 23 * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE 24 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL 25 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS 26 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) 27 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT 28 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY 29 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF 30 * SUCH DAMAGE. 31 * 32 * @(#)mbuf.h 8.5 (Berkeley) 2/19/95 33 * $FreeBSD$ 34 */ 35 36 #ifndef _SYS_MBUF_H_ 37 #define _SYS_MBUF_H_ 38 39 /* XXX: These includes suck. Sorry! */ 40 #include <sys/queue.h> 41 #ifdef _KERNEL 42 #include <sys/systm.h> 43 #include <vm/uma.h> 44 #ifdef WITNESS 45 #include <sys/lock.h> 46 #endif 47 #endif 48 49 #ifdef _KERNEL 50 #include <sys/sdt.h> 51 52 #define MBUF_PROBE1(probe, arg0) \ 53 SDT_PROBE1(sdt, , , probe, arg0) 54 #define MBUF_PROBE2(probe, arg0, arg1) \ 55 SDT_PROBE2(sdt, , , probe, arg0, arg1) 56 #define MBUF_PROBE3(probe, arg0, arg1, arg2) \ 57 SDT_PROBE3(sdt, , , probe, arg0, arg1, arg2) 58 #define MBUF_PROBE4(probe, arg0, arg1, arg2, arg3) \ 59 SDT_PROBE4(sdt, , , probe, arg0, arg1, arg2, arg3) 60 #define MBUF_PROBE5(probe, arg0, arg1, arg2, arg3, arg4) \ 61 SDT_PROBE5(sdt, , , probe, arg0, arg1, arg2, arg3, arg4) 62 63 SDT_PROBE_DECLARE(sdt, , , m__init); 64 SDT_PROBE_DECLARE(sdt, , , m__gethdr); 65 SDT_PROBE_DECLARE(sdt, , , m__get); 66 SDT_PROBE_DECLARE(sdt, , , m__getcl); 67 SDT_PROBE_DECLARE(sdt, , , m__clget); 68 SDT_PROBE_DECLARE(sdt, , , m__cljget); 69 SDT_PROBE_DECLARE(sdt, , , m__cljset); 70 SDT_PROBE_DECLARE(sdt, , , m__free); 71 SDT_PROBE_DECLARE(sdt, , , m__freem); 72 73 #endif /* _KERNEL */ 74 75 /* 76 * Mbufs are of a single size, MSIZE (sys/param.h), which includes overhead. 77 * An mbuf may add a single "mbuf cluster" of size MCLBYTES (also in 78 * sys/param.h), which has no additional overhead and is used instead of the 79 * internal data area; this is done when at least MINCLSIZE of data must be 80 * stored. Additionally, it is possible to allocate a separate buffer 81 * externally and attach it to the mbuf in a way similar to that of mbuf 82 * clusters. 83 * 84 * NB: These calculation do not take actual compiler-induced alignment and 85 * padding inside the complete struct mbuf into account. Appropriate 86 * attention is required when changing members of struct mbuf. 87 * 88 * MLEN is data length in a normal mbuf. 89 * MHLEN is data length in an mbuf with pktheader. 90 * MINCLSIZE is a smallest amount of data that should be put into cluster. 91 * 92 * Compile-time assertions in uipc_mbuf.c test these values to ensure that 93 * they are sensible. 94 */ 95 struct mbuf; 96 #define MHSIZE offsetof(struct mbuf, m_dat) 97 #define MPKTHSIZE offsetof(struct mbuf, m_pktdat) 98 #define MLEN ((int)(MSIZE - MHSIZE)) 99 #define MHLEN ((int)(MSIZE - MPKTHSIZE)) 100 #define MINCLSIZE (MHLEN + 1) 101 102 #ifdef _KERNEL 103 /*- 104 * Macro for type conversion: convert mbuf pointer to data pointer of correct 105 * type: 106 * 107 * mtod(m, t) -- Convert mbuf pointer to data pointer of correct type. 108 * mtodo(m, o) -- Same as above but with offset 'o' into data. 109 */ 110 #define mtod(m, t) ((t)((m)->m_data)) 111 #define mtodo(m, o) ((void *)(((m)->m_data) + (o))) 112 113 /* 114 * Argument structure passed to UMA routines during mbuf and packet 115 * allocations. 116 */ 117 struct mb_args { 118 int flags; /* Flags for mbuf being allocated */ 119 short type; /* Type of mbuf being allocated */ 120 }; 121 #endif /* _KERNEL */ 122 123 /* 124 * Packet tag structure (see below for details). 125 */ 126 struct m_tag { 127 SLIST_ENTRY(m_tag) m_tag_link; /* List of packet tags */ 128 u_int16_t m_tag_id; /* Tag ID */ 129 u_int16_t m_tag_len; /* Length of data */ 130 u_int32_t m_tag_cookie; /* ABI/Module ID */ 131 void (*m_tag_free)(struct m_tag *); 132 }; 133 134 /* 135 * Static network interface owned tag. 136 * Allocated through ifp->if_snd_tag_alloc(). 137 */ 138 struct m_snd_tag { 139 struct ifnet *ifp; /* network interface tag belongs to */ 140 }; 141 142 /* 143 * Record/packet header in first mbuf of chain; valid only if M_PKTHDR is set. 144 * Size ILP32: 48 145 * LP64: 56 146 * Compile-time assertions in uipc_mbuf.c test these values to ensure that 147 * they are correct. 148 */ 149 struct pkthdr { 150 union { 151 struct m_snd_tag *snd_tag; /* send tag, if any */ 152 struct ifnet *rcvif; /* rcv interface */ 153 }; 154 SLIST_HEAD(packet_tags, m_tag) tags; /* list of packet tags */ 155 int32_t len; /* total packet length */ 156 157 /* Layer crossing persistent information. */ 158 uint32_t flowid; /* packet's 4-tuple system */ 159 uint32_t csum_flags; /* checksum and offload features */ 160 uint16_t fibnum; /* this packet should use this fib */ 161 uint8_t cosqos; /* class/quality of service */ 162 uint8_t rsstype; /* hash type */ 163 union { 164 uint64_t rcv_tstmp; /* timestamp in ns */ 165 struct { 166 uint8_t l2hlen; /* layer 2 hdr len */ 167 uint8_t l3hlen; /* layer 3 hdr len */ 168 uint8_t l4hlen; /* layer 4 hdr len */ 169 uint8_t l5hlen; /* layer 5 hdr len */ 170 uint32_t spare; 171 }; 172 }; 173 union { 174 uint8_t eight[8]; 175 uint16_t sixteen[4]; 176 uint32_t thirtytwo[2]; 177 uint64_t sixtyfour[1]; 178 uintptr_t unintptr[1]; 179 void *ptr; 180 } PH_per; 181 182 /* Layer specific non-persistent local storage for reassembly, etc. */ 183 union { 184 uint8_t eight[8]; 185 uint16_t sixteen[4]; 186 uint32_t thirtytwo[2]; 187 uint64_t sixtyfour[1]; 188 uintptr_t unintptr[1]; 189 void *ptr; 190 } PH_loc; 191 }; 192 #define ether_vtag PH_per.sixteen[0] 193 #define PH_vt PH_per 194 #define vt_nrecs sixteen[0] 195 #define tso_segsz PH_per.sixteen[1] 196 #define lro_nsegs tso_segsz 197 #define csum_phsum PH_per.sixteen[2] 198 #define csum_data PH_per.thirtytwo[1] 199 #define pace_thoff PH_loc.sixteen[0] 200 #define pace_tlen PH_loc.sixteen[1] 201 #define pace_drphdrlen PH_loc.sixteen[2] 202 #define pace_tos PH_loc.eight[6] 203 #define pace_lock PH_loc.eight[7] 204 205 /* 206 * Description of external storage mapped into mbuf; valid only if M_EXT is 207 * set. 208 * Size ILP32: 28 209 * LP64: 48 210 * Compile-time assertions in uipc_mbuf.c test these values to ensure that 211 * they are correct. 212 */ 213 typedef void m_ext_free_t(struct mbuf *); 214 struct m_ext { 215 union { 216 /* 217 * If EXT_FLAG_EMBREF is set, then we use refcount in the 218 * mbuf, the 'ext_count' member. Otherwise, we have a 219 * shadow copy and we use pointer 'ext_cnt'. The original 220 * mbuf is responsible to carry the pointer to free routine 221 * and its arguments. They aren't copied into shadows in 222 * mb_dupcl() to avoid dereferencing next cachelines. 223 */ 224 volatile u_int ext_count; 225 volatile u_int *ext_cnt; 226 }; 227 char *ext_buf; /* start of buffer */ 228 uint32_t ext_size; /* size of buffer, for ext_free */ 229 uint32_t ext_type:8, /* type of external storage */ 230 ext_flags:24; /* external storage mbuf flags */ 231 /* 232 * Fields below store the free context for the external storage. 233 * They are valid only in the refcount carrying mbuf, the one with 234 * EXT_FLAG_EMBREF flag, with exclusion for EXT_EXTREF type, where 235 * the free context is copied into all mbufs that use same external 236 * storage. 237 */ 238 #define m_ext_copylen offsetof(struct m_ext, ext_free) 239 m_ext_free_t *ext_free; /* free routine if not the usual */ 240 void *ext_arg1; /* optional argument pointer */ 241 void *ext_arg2; /* optional argument pointer */ 242 }; 243 244 /* 245 * The core of the mbuf object along with some shortcut defines for practical 246 * purposes. 247 */ 248 struct mbuf { 249 /* 250 * Header present at the beginning of every mbuf. 251 * Size ILP32: 24 252 * LP64: 32 253 * Compile-time assertions in uipc_mbuf.c test these values to ensure 254 * that they are correct. 255 */ 256 union { /* next buffer in chain */ 257 struct mbuf *m_next; 258 SLIST_ENTRY(mbuf) m_slist; 259 STAILQ_ENTRY(mbuf) m_stailq; 260 }; 261 union { /* next chain in queue/record */ 262 struct mbuf *m_nextpkt; 263 SLIST_ENTRY(mbuf) m_slistpkt; 264 STAILQ_ENTRY(mbuf) m_stailqpkt; 265 }; 266 caddr_t m_data; /* location of data */ 267 int32_t m_len; /* amount of data in this mbuf */ 268 uint32_t m_type:8, /* type of data in this mbuf */ 269 m_flags:24; /* flags; see below */ 270 #if !defined(__LP64__) 271 uint32_t m_pad; /* pad for 64bit alignment */ 272 #endif 273 274 /* 275 * A set of optional headers (packet header, external storage header) 276 * and internal data storage. Historically, these arrays were sized 277 * to MHLEN (space left after a packet header) and MLEN (space left 278 * after only a regular mbuf header); they are now variable size in 279 * order to support future work on variable-size mbufs. 280 */ 281 union { 282 struct { 283 struct pkthdr m_pkthdr; /* M_PKTHDR set */ 284 union { 285 struct m_ext m_ext; /* M_EXT set */ 286 char m_pktdat[0]; 287 }; 288 }; 289 char m_dat[0]; /* !M_PKTHDR, !M_EXT */ 290 }; 291 }; 292 293 /* 294 * mbuf flags of global significance and layer crossing. 295 * Those of only protocol/layer specific significance are to be mapped 296 * to M_PROTO[1-12] and cleared at layer handoff boundaries. 297 * NB: Limited to the lower 24 bits. 298 */ 299 #define M_EXT 0x00000001 /* has associated external storage */ 300 #define M_PKTHDR 0x00000002 /* start of record */ 301 #define M_EOR 0x00000004 /* end of record */ 302 #define M_RDONLY 0x00000008 /* associated data is marked read-only */ 303 #define M_BCAST 0x00000010 /* send/received as link-level broadcast */ 304 #define M_MCAST 0x00000020 /* send/received as link-level multicast */ 305 #define M_PROMISC 0x00000040 /* packet was not for us */ 306 #define M_VLANTAG 0x00000080 /* ether_vtag is valid */ 307 #define M_NOMAP 0x00000100 /* mbuf data is unmapped (soon from Drew) */ 308 #define M_NOFREE 0x00000200 /* do not free mbuf, embedded in cluster */ 309 #define M_TSTMP 0x00000400 /* rcv_tstmp field is valid */ 310 #define M_TSTMP_HPREC 0x00000800 /* rcv_tstmp is high-prec, typically 311 hw-stamped on port (useful for IEEE 1588 312 and 802.1AS) */ 313 314 #define M_PROTO1 0x00001000 /* protocol-specific */ 315 #define M_PROTO2 0x00002000 /* protocol-specific */ 316 #define M_PROTO3 0x00004000 /* protocol-specific */ 317 #define M_PROTO4 0x00008000 /* protocol-specific */ 318 #define M_PROTO5 0x00010000 /* protocol-specific */ 319 #define M_PROTO6 0x00020000 /* protocol-specific */ 320 #define M_PROTO7 0x00040000 /* protocol-specific */ 321 #define M_PROTO8 0x00080000 /* protocol-specific */ 322 #define M_PROTO9 0x00100000 /* protocol-specific */ 323 #define M_PROTO10 0x00200000 /* protocol-specific */ 324 #define M_PROTO11 0x00400000 /* protocol-specific */ 325 #define M_PROTO12 0x00800000 /* protocol-specific */ 326 327 #define MB_DTOR_SKIP 0x1 /* don't pollute the cache by touching a freed mbuf */ 328 329 /* 330 * Flags to purge when crossing layers. 331 */ 332 #define M_PROTOFLAGS \ 333 (M_PROTO1|M_PROTO2|M_PROTO3|M_PROTO4|M_PROTO5|M_PROTO6|M_PROTO7|M_PROTO8|\ 334 M_PROTO9|M_PROTO10|M_PROTO11|M_PROTO12) 335 336 /* 337 * Flags preserved when copying m_pkthdr. 338 */ 339 #define M_COPYFLAGS \ 340 (M_PKTHDR|M_EOR|M_RDONLY|M_BCAST|M_MCAST|M_PROMISC|M_VLANTAG|M_TSTMP| \ 341 M_TSTMP_HPREC|M_PROTOFLAGS) 342 343 /* 344 * Mbuf flag description for use with printf(9) %b identifier. 345 */ 346 #define M_FLAG_BITS \ 347 "\20\1M_EXT\2M_PKTHDR\3M_EOR\4M_RDONLY\5M_BCAST\6M_MCAST" \ 348 "\7M_PROMISC\10M_VLANTAG\13M_TSTMP\14M_TSTMP_HPREC" 349 #define M_FLAG_PROTOBITS \ 350 "\15M_PROTO1\16M_PROTO2\17M_PROTO3\20M_PROTO4\21M_PROTO5" \ 351 "\22M_PROTO6\23M_PROTO7\24M_PROTO8\25M_PROTO9\26M_PROTO10" \ 352 "\27M_PROTO11\30M_PROTO12" 353 #define M_FLAG_PRINTF (M_FLAG_BITS M_FLAG_PROTOBITS) 354 355 /* 356 * Network interface cards are able to hash protocol fields (such as IPv4 357 * addresses and TCP port numbers) classify packets into flows. These flows 358 * can then be used to maintain ordering while delivering packets to the OS 359 * via parallel input queues, as well as to provide a stateless affinity 360 * model. NIC drivers can pass up the hash via m->m_pkthdr.flowid, and set 361 * m_flag fields to indicate how the hash should be interpreted by the 362 * network stack. 363 * 364 * Most NICs support RSS, which provides ordering and explicit affinity, and 365 * use the hash m_flag bits to indicate what header fields were covered by 366 * the hash. M_HASHTYPE_OPAQUE and M_HASHTYPE_OPAQUE_HASH can be set by non- 367 * RSS cards or configurations that provide an opaque flow identifier, allowing 368 * for ordering and distribution without explicit affinity. Additionally, 369 * M_HASHTYPE_OPAQUE_HASH indicates that the flow identifier has hash 370 * properties. 371 * 372 * The meaning of the IPV6_EX suffix: 373 * "o Home address from the home address option in the IPv6 destination 374 * options header. If the extension header is not present, use the Source 375 * IPv6 Address. 376 * o IPv6 address that is contained in the Routing-Header-Type-2 from the 377 * associated extension header. If the extension header is not present, 378 * use the Destination IPv6 Address." 379 * Quoted from: 380 * https://docs.microsoft.com/en-us/windows-hardware/drivers/network/rss-hashing-types#ndishashipv6ex 381 */ 382 #define M_HASHTYPE_HASHPROP 0x80 /* has hash properties */ 383 #define M_HASHTYPE_HASH(t) (M_HASHTYPE_HASHPROP | (t)) 384 /* Microsoft RSS standard hash types */ 385 #define M_HASHTYPE_NONE 0 386 #define M_HASHTYPE_RSS_IPV4 M_HASHTYPE_HASH(1) /* IPv4 2-tuple */ 387 #define M_HASHTYPE_RSS_TCP_IPV4 M_HASHTYPE_HASH(2) /* TCPv4 4-tuple */ 388 #define M_HASHTYPE_RSS_IPV6 M_HASHTYPE_HASH(3) /* IPv6 2-tuple */ 389 #define M_HASHTYPE_RSS_TCP_IPV6 M_HASHTYPE_HASH(4) /* TCPv6 4-tuple */ 390 #define M_HASHTYPE_RSS_IPV6_EX M_HASHTYPE_HASH(5) /* IPv6 2-tuple + 391 * ext hdrs */ 392 #define M_HASHTYPE_RSS_TCP_IPV6_EX M_HASHTYPE_HASH(6) /* TCPv6 4-tuple + 393 * ext hdrs */ 394 #define M_HASHTYPE_RSS_UDP_IPV4 M_HASHTYPE_HASH(7) /* IPv4 UDP 4-tuple*/ 395 #define M_HASHTYPE_RSS_UDP_IPV6 M_HASHTYPE_HASH(9) /* IPv6 UDP 4-tuple*/ 396 #define M_HASHTYPE_RSS_UDP_IPV6_EX M_HASHTYPE_HASH(10)/* IPv6 UDP 4-tuple + 397 * ext hdrs */ 398 399 #define M_HASHTYPE_OPAQUE 63 /* ordering, not affinity */ 400 #define M_HASHTYPE_OPAQUE_HASH M_HASHTYPE_HASH(M_HASHTYPE_OPAQUE) 401 /* ordering+hash, not affinity*/ 402 403 #define M_HASHTYPE_CLEAR(m) ((m)->m_pkthdr.rsstype = 0) 404 #define M_HASHTYPE_GET(m) ((m)->m_pkthdr.rsstype) 405 #define M_HASHTYPE_SET(m, v) ((m)->m_pkthdr.rsstype = (v)) 406 #define M_HASHTYPE_TEST(m, v) (M_HASHTYPE_GET(m) == (v)) 407 #define M_HASHTYPE_ISHASH(m) (M_HASHTYPE_GET(m) & M_HASHTYPE_HASHPROP) 408 409 /* 410 * COS/QOS class and quality of service tags. 411 * It uses DSCP code points as base. 412 */ 413 #define QOS_DSCP_CS0 0x00 414 #define QOS_DSCP_DEF QOS_DSCP_CS0 415 #define QOS_DSCP_CS1 0x20 416 #define QOS_DSCP_AF11 0x28 417 #define QOS_DSCP_AF12 0x30 418 #define QOS_DSCP_AF13 0x38 419 #define QOS_DSCP_CS2 0x40 420 #define QOS_DSCP_AF21 0x48 421 #define QOS_DSCP_AF22 0x50 422 #define QOS_DSCP_AF23 0x58 423 #define QOS_DSCP_CS3 0x60 424 #define QOS_DSCP_AF31 0x68 425 #define QOS_DSCP_AF32 0x70 426 #define QOS_DSCP_AF33 0x78 427 #define QOS_DSCP_CS4 0x80 428 #define QOS_DSCP_AF41 0x88 429 #define QOS_DSCP_AF42 0x90 430 #define QOS_DSCP_AF43 0x98 431 #define QOS_DSCP_CS5 0xa0 432 #define QOS_DSCP_EF 0xb8 433 #define QOS_DSCP_CS6 0xc0 434 #define QOS_DSCP_CS7 0xe0 435 436 /* 437 * External mbuf storage buffer types. 438 */ 439 #define EXT_CLUSTER 1 /* mbuf cluster */ 440 #define EXT_SFBUF 2 /* sendfile(2)'s sf_buf */ 441 #define EXT_JUMBOP 3 /* jumbo cluster page sized */ 442 #define EXT_JUMBO9 4 /* jumbo cluster 9216 bytes */ 443 #define EXT_JUMBO16 5 /* jumbo cluster 16184 bytes */ 444 #define EXT_PACKET 6 /* mbuf+cluster from packet zone */ 445 #define EXT_MBUF 7 /* external mbuf reference */ 446 447 #define EXT_VENDOR1 224 /* for vendor-internal use */ 448 #define EXT_VENDOR2 225 /* for vendor-internal use */ 449 #define EXT_VENDOR3 226 /* for vendor-internal use */ 450 #define EXT_VENDOR4 227 /* for vendor-internal use */ 451 452 #define EXT_EXP1 244 /* for experimental use */ 453 #define EXT_EXP2 245 /* for experimental use */ 454 #define EXT_EXP3 246 /* for experimental use */ 455 #define EXT_EXP4 247 /* for experimental use */ 456 457 #define EXT_NET_DRV 252 /* custom ext_buf provided by net driver(s) */ 458 #define EXT_MOD_TYPE 253 /* custom module's ext_buf type */ 459 #define EXT_DISPOSABLE 254 /* can throw this buffer away w/page flipping */ 460 #define EXT_EXTREF 255 /* has externally maintained ext_cnt ptr */ 461 462 /* 463 * Flags for external mbuf buffer types. 464 * NB: limited to the lower 24 bits. 465 */ 466 #define EXT_FLAG_EMBREF 0x000001 /* embedded ext_count */ 467 #define EXT_FLAG_EXTREF 0x000002 /* external ext_cnt, notyet */ 468 469 #define EXT_FLAG_NOFREE 0x000010 /* don't free mbuf to pool, notyet */ 470 471 #define EXT_FLAG_VENDOR1 0x010000 /* These flags are vendor */ 472 #define EXT_FLAG_VENDOR2 0x020000 /* or submodule specific, */ 473 #define EXT_FLAG_VENDOR3 0x040000 /* not used by mbuf code. */ 474 #define EXT_FLAG_VENDOR4 0x080000 /* Set/read by submodule. */ 475 476 #define EXT_FLAG_EXP1 0x100000 /* for experimental use */ 477 #define EXT_FLAG_EXP2 0x200000 /* for experimental use */ 478 #define EXT_FLAG_EXP3 0x400000 /* for experimental use */ 479 #define EXT_FLAG_EXP4 0x800000 /* for experimental use */ 480 481 /* 482 * EXT flag description for use with printf(9) %b identifier. 483 */ 484 #define EXT_FLAG_BITS \ 485 "\20\1EXT_FLAG_EMBREF\2EXT_FLAG_EXTREF\5EXT_FLAG_NOFREE" \ 486 "\21EXT_FLAG_VENDOR1\22EXT_FLAG_VENDOR2\23EXT_FLAG_VENDOR3" \ 487 "\24EXT_FLAG_VENDOR4\25EXT_FLAG_EXP1\26EXT_FLAG_EXP2\27EXT_FLAG_EXP3" \ 488 "\30EXT_FLAG_EXP4" 489 490 /* 491 * Flags indicating checksum, segmentation and other offload work to be 492 * done, or already done, by hardware or lower layers. It is split into 493 * separate inbound and outbound flags. 494 * 495 * Outbound flags that are set by upper protocol layers requesting lower 496 * layers, or ideally the hardware, to perform these offloading tasks. 497 * For outbound packets this field and its flags can be directly tested 498 * against ifnet if_hwassist. 499 */ 500 #define CSUM_IP 0x00000001 /* IP header checksum offload */ 501 #define CSUM_IP_UDP 0x00000002 /* UDP checksum offload */ 502 #define CSUM_IP_TCP 0x00000004 /* TCP checksum offload */ 503 #define CSUM_IP_SCTP 0x00000008 /* SCTP checksum offload */ 504 #define CSUM_IP_TSO 0x00000010 /* TCP segmentation offload */ 505 #define CSUM_IP_ISCSI 0x00000020 /* iSCSI checksum offload */ 506 507 #define CSUM_IP6_UDP 0x00000200 /* UDP checksum offload */ 508 #define CSUM_IP6_TCP 0x00000400 /* TCP checksum offload */ 509 #define CSUM_IP6_SCTP 0x00000800 /* SCTP checksum offload */ 510 #define CSUM_IP6_TSO 0x00001000 /* TCP segmentation offload */ 511 #define CSUM_IP6_ISCSI 0x00002000 /* iSCSI checksum offload */ 512 513 /* Inbound checksum support where the checksum was verified by hardware. */ 514 #define CSUM_L3_CALC 0x01000000 /* calculated layer 3 csum */ 515 #define CSUM_L3_VALID 0x02000000 /* checksum is correct */ 516 #define CSUM_L4_CALC 0x04000000 /* calculated layer 4 csum */ 517 #define CSUM_L4_VALID 0x08000000 /* checksum is correct */ 518 #define CSUM_L5_CALC 0x10000000 /* calculated layer 5 csum */ 519 #define CSUM_L5_VALID 0x20000000 /* checksum is correct */ 520 #define CSUM_COALESCED 0x40000000 /* contains merged segments */ 521 522 /* 523 * CSUM flag description for use with printf(9) %b identifier. 524 */ 525 #define CSUM_BITS \ 526 "\20\1CSUM_IP\2CSUM_IP_UDP\3CSUM_IP_TCP\4CSUM_IP_SCTP\5CSUM_IP_TSO" \ 527 "\6CSUM_IP_ISCSI" \ 528 "\12CSUM_IP6_UDP\13CSUM_IP6_TCP\14CSUM_IP6_SCTP\15CSUM_IP6_TSO" \ 529 "\16CSUM_IP6_ISCSI" \ 530 "\31CSUM_L3_CALC\32CSUM_L3_VALID\33CSUM_L4_CALC\34CSUM_L4_VALID" \ 531 "\35CSUM_L5_CALC\36CSUM_L5_VALID\37CSUM_COALESCED" 532 533 /* CSUM flags compatibility mappings. */ 534 #define CSUM_IP_CHECKED CSUM_L3_CALC 535 #define CSUM_IP_VALID CSUM_L3_VALID 536 #define CSUM_DATA_VALID CSUM_L4_VALID 537 #define CSUM_PSEUDO_HDR CSUM_L4_CALC 538 #define CSUM_SCTP_VALID CSUM_L4_VALID 539 #define CSUM_DELAY_DATA (CSUM_TCP|CSUM_UDP) 540 #define CSUM_DELAY_IP CSUM_IP /* Only v4, no v6 IP hdr csum */ 541 #define CSUM_DELAY_DATA_IPV6 (CSUM_TCP_IPV6|CSUM_UDP_IPV6) 542 #define CSUM_DATA_VALID_IPV6 CSUM_DATA_VALID 543 #define CSUM_TCP CSUM_IP_TCP 544 #define CSUM_UDP CSUM_IP_UDP 545 #define CSUM_SCTP CSUM_IP_SCTP 546 #define CSUM_TSO (CSUM_IP_TSO|CSUM_IP6_TSO) 547 #define CSUM_UDP_IPV6 CSUM_IP6_UDP 548 #define CSUM_TCP_IPV6 CSUM_IP6_TCP 549 #define CSUM_SCTP_IPV6 CSUM_IP6_SCTP 550 551 /* 552 * mbuf types describing the content of the mbuf (including external storage). 553 */ 554 #define MT_NOTMBUF 0 /* USED INTERNALLY ONLY! Object is not mbuf */ 555 #define MT_DATA 1 /* dynamic (data) allocation */ 556 #define MT_HEADER MT_DATA /* packet header, use M_PKTHDR instead */ 557 558 #define MT_VENDOR1 4 /* for vendor-internal use */ 559 #define MT_VENDOR2 5 /* for vendor-internal use */ 560 #define MT_VENDOR3 6 /* for vendor-internal use */ 561 #define MT_VENDOR4 7 /* for vendor-internal use */ 562 563 #define MT_SONAME 8 /* socket name */ 564 565 #define MT_EXP1 9 /* for experimental use */ 566 #define MT_EXP2 10 /* for experimental use */ 567 #define MT_EXP3 11 /* for experimental use */ 568 #define MT_EXP4 12 /* for experimental use */ 569 570 #define MT_CONTROL 14 /* extra-data protocol message */ 571 #define MT_OOBDATA 15 /* expedited data */ 572 573 #define MT_NOINIT 255 /* Not a type but a flag to allocate 574 a non-initialized mbuf */ 575 576 /* 577 * String names of mbuf-related UMA(9) and malloc(9) types. Exposed to 578 * !_KERNEL so that monitoring tools can look up the zones with 579 * libmemstat(3). 580 */ 581 #define MBUF_MEM_NAME "mbuf" 582 #define MBUF_CLUSTER_MEM_NAME "mbuf_cluster" 583 #define MBUF_PACKET_MEM_NAME "mbuf_packet" 584 #define MBUF_JUMBOP_MEM_NAME "mbuf_jumbo_page" 585 #define MBUF_JUMBO9_MEM_NAME "mbuf_jumbo_9k" 586 #define MBUF_JUMBO16_MEM_NAME "mbuf_jumbo_16k" 587 #define MBUF_TAG_MEM_NAME "mbuf_tag" 588 #define MBUF_EXTREFCNT_MEM_NAME "mbuf_ext_refcnt" 589 590 #ifdef _KERNEL 591 592 #ifdef WITNESS 593 #define MBUF_CHECKSLEEP(how) do { \ 594 if (how == M_WAITOK) \ 595 WITNESS_WARN(WARN_GIANTOK | WARN_SLEEPOK, NULL, \ 596 "Sleeping in \"%s\"", __func__); \ 597 } while (0) 598 #else 599 #define MBUF_CHECKSLEEP(how) 600 #endif 601 602 /* 603 * Network buffer allocation API 604 * 605 * The rest of it is defined in kern/kern_mbuf.c 606 */ 607 extern uma_zone_t zone_mbuf; 608 extern uma_zone_t zone_clust; 609 extern uma_zone_t zone_pack; 610 extern uma_zone_t zone_jumbop; 611 extern uma_zone_t zone_jumbo9; 612 extern uma_zone_t zone_jumbo16; 613 614 void mb_dupcl(struct mbuf *, struct mbuf *); 615 void mb_free_ext(struct mbuf *); 616 void m_adj(struct mbuf *, int); 617 int m_apply(struct mbuf *, int, int, 618 int (*)(void *, void *, u_int), void *); 619 int m_append(struct mbuf *, int, c_caddr_t); 620 void m_cat(struct mbuf *, struct mbuf *); 621 void m_catpkt(struct mbuf *, struct mbuf *); 622 int m_clget(struct mbuf *m, int how); 623 void *m_cljget(struct mbuf *m, int how, int size); 624 struct mbuf *m_collapse(struct mbuf *, int, int); 625 void m_copyback(struct mbuf *, int, int, c_caddr_t); 626 void m_copydata(const struct mbuf *, int, int, caddr_t); 627 struct mbuf *m_copym(struct mbuf *, int, int, int); 628 struct mbuf *m_copypacket(struct mbuf *, int); 629 void m_copy_pkthdr(struct mbuf *, struct mbuf *); 630 struct mbuf *m_copyup(struct mbuf *, int, int); 631 struct mbuf *m_defrag(struct mbuf *, int); 632 void m_demote_pkthdr(struct mbuf *); 633 void m_demote(struct mbuf *, int, int); 634 struct mbuf *m_devget(char *, int, int, struct ifnet *, 635 void (*)(char *, caddr_t, u_int)); 636 struct mbuf *m_dup(const struct mbuf *, int); 637 int m_dup_pkthdr(struct mbuf *, const struct mbuf *, int); 638 void m_extadd(struct mbuf *, char *, u_int, m_ext_free_t, 639 void *, void *, int, int); 640 u_int m_fixhdr(struct mbuf *); 641 struct mbuf *m_fragment(struct mbuf *, int, int); 642 void m_freem(struct mbuf *); 643 struct mbuf *m_get2(int, int, short, int); 644 struct mbuf *m_getjcl(int, short, int, int); 645 struct mbuf *m_getm2(struct mbuf *, int, int, short, int); 646 struct mbuf *m_getptr(struct mbuf *, int, int *); 647 u_int m_length(struct mbuf *, struct mbuf **); 648 int m_mbuftouio(struct uio *, const struct mbuf *, int); 649 void m_move_pkthdr(struct mbuf *, struct mbuf *); 650 int m_pkthdr_init(struct mbuf *, int); 651 struct mbuf *m_prepend(struct mbuf *, int, int); 652 void m_print(const struct mbuf *, int); 653 struct mbuf *m_pulldown(struct mbuf *, int, int, int *); 654 struct mbuf *m_pullup(struct mbuf *, int); 655 int m_sanity(struct mbuf *, int); 656 struct mbuf *m_split(struct mbuf *, int, int); 657 struct mbuf *m_uiotombuf(struct uio *, int, int, int, int); 658 struct mbuf *m_unshare(struct mbuf *, int); 659 660 static __inline int 661 m_gettype(int size) 662 { 663 int type; 664 665 switch (size) { 666 case MSIZE: 667 type = EXT_MBUF; 668 break; 669 case MCLBYTES: 670 type = EXT_CLUSTER; 671 break; 672 #if MJUMPAGESIZE != MCLBYTES 673 case MJUMPAGESIZE: 674 type = EXT_JUMBOP; 675 break; 676 #endif 677 case MJUM9BYTES: 678 type = EXT_JUMBO9; 679 break; 680 case MJUM16BYTES: 681 type = EXT_JUMBO16; 682 break; 683 default: 684 panic("%s: invalid cluster size %d", __func__, size); 685 } 686 687 return (type); 688 } 689 690 /* 691 * Associated an external reference counted buffer with an mbuf. 692 */ 693 static __inline void 694 m_extaddref(struct mbuf *m, char *buf, u_int size, u_int *ref_cnt, 695 m_ext_free_t freef, void *arg1, void *arg2) 696 { 697 698 KASSERT(ref_cnt != NULL, ("%s: ref_cnt not provided", __func__)); 699 700 atomic_add_int(ref_cnt, 1); 701 m->m_flags |= M_EXT; 702 m->m_ext.ext_buf = buf; 703 m->m_ext.ext_cnt = ref_cnt; 704 m->m_data = m->m_ext.ext_buf; 705 m->m_ext.ext_size = size; 706 m->m_ext.ext_free = freef; 707 m->m_ext.ext_arg1 = arg1; 708 m->m_ext.ext_arg2 = arg2; 709 m->m_ext.ext_type = EXT_EXTREF; 710 m->m_ext.ext_flags = 0; 711 } 712 713 static __inline uma_zone_t 714 m_getzone(int size) 715 { 716 uma_zone_t zone; 717 718 switch (size) { 719 case MCLBYTES: 720 zone = zone_clust; 721 break; 722 #if MJUMPAGESIZE != MCLBYTES 723 case MJUMPAGESIZE: 724 zone = zone_jumbop; 725 break; 726 #endif 727 case MJUM9BYTES: 728 zone = zone_jumbo9; 729 break; 730 case MJUM16BYTES: 731 zone = zone_jumbo16; 732 break; 733 default: 734 panic("%s: invalid cluster size %d", __func__, size); 735 } 736 737 return (zone); 738 } 739 740 /* 741 * Initialize an mbuf with linear storage. 742 * 743 * Inline because the consumer text overhead will be roughly the same to 744 * initialize or call a function with this many parameters and M_PKTHDR 745 * should go away with constant propagation for !MGETHDR. 746 */ 747 static __inline int 748 m_init(struct mbuf *m, int how, short type, int flags) 749 { 750 int error; 751 752 m->m_next = NULL; 753 m->m_nextpkt = NULL; 754 m->m_data = m->m_dat; 755 m->m_len = 0; 756 m->m_flags = flags; 757 m->m_type = type; 758 if (flags & M_PKTHDR) 759 error = m_pkthdr_init(m, how); 760 else 761 error = 0; 762 763 MBUF_PROBE5(m__init, m, how, type, flags, error); 764 return (error); 765 } 766 767 static __inline struct mbuf * 768 m_get(int how, short type) 769 { 770 struct mbuf *m; 771 struct mb_args args; 772 773 args.flags = 0; 774 args.type = type; 775 m = uma_zalloc_arg(zone_mbuf, &args, how); 776 MBUF_PROBE3(m__get, how, type, m); 777 return (m); 778 } 779 780 static __inline struct mbuf * 781 m_gethdr(int how, short type) 782 { 783 struct mbuf *m; 784 struct mb_args args; 785 786 args.flags = M_PKTHDR; 787 args.type = type; 788 m = uma_zalloc_arg(zone_mbuf, &args, how); 789 MBUF_PROBE3(m__gethdr, how, type, m); 790 return (m); 791 } 792 793 static __inline struct mbuf * 794 m_getcl(int how, short type, int flags) 795 { 796 struct mbuf *m; 797 struct mb_args args; 798 799 args.flags = flags; 800 args.type = type; 801 m = uma_zalloc_arg(zone_pack, &args, how); 802 MBUF_PROBE4(m__getcl, how, type, flags, m); 803 return (m); 804 } 805 806 /* 807 * XXX: m_cljset() is a dangerous API. One must attach only a new, 808 * unreferenced cluster to an mbuf(9). It is not possible to assert 809 * that, so care can be taken only by users of the API. 810 */ 811 static __inline void 812 m_cljset(struct mbuf *m, void *cl, int type) 813 { 814 int size; 815 816 switch (type) { 817 case EXT_CLUSTER: 818 size = MCLBYTES; 819 break; 820 #if MJUMPAGESIZE != MCLBYTES 821 case EXT_JUMBOP: 822 size = MJUMPAGESIZE; 823 break; 824 #endif 825 case EXT_JUMBO9: 826 size = MJUM9BYTES; 827 break; 828 case EXT_JUMBO16: 829 size = MJUM16BYTES; 830 break; 831 default: 832 panic("%s: unknown cluster type %d", __func__, type); 833 break; 834 } 835 836 m->m_data = m->m_ext.ext_buf = cl; 837 m->m_ext.ext_free = m->m_ext.ext_arg1 = m->m_ext.ext_arg2 = NULL; 838 m->m_ext.ext_size = size; 839 m->m_ext.ext_type = type; 840 m->m_ext.ext_flags = EXT_FLAG_EMBREF; 841 m->m_ext.ext_count = 1; 842 m->m_flags |= M_EXT; 843 MBUF_PROBE3(m__cljset, m, cl, type); 844 } 845 846 static __inline void 847 m_chtype(struct mbuf *m, short new_type) 848 { 849 850 m->m_type = new_type; 851 } 852 853 static __inline void 854 m_clrprotoflags(struct mbuf *m) 855 { 856 857 while (m) { 858 m->m_flags &= ~M_PROTOFLAGS; 859 m = m->m_next; 860 } 861 } 862 863 static __inline struct mbuf * 864 m_last(struct mbuf *m) 865 { 866 867 while (m->m_next) 868 m = m->m_next; 869 return (m); 870 } 871 872 static inline u_int 873 m_extrefcnt(struct mbuf *m) 874 { 875 876 KASSERT(m->m_flags & M_EXT, ("%s: M_EXT missing", __func__)); 877 878 return ((m->m_ext.ext_flags & EXT_FLAG_EMBREF) ? m->m_ext.ext_count : 879 *m->m_ext.ext_cnt); 880 } 881 882 /* 883 * mbuf, cluster, and external object allocation macros (for compatibility 884 * purposes). 885 */ 886 #define M_MOVE_PKTHDR(to, from) m_move_pkthdr((to), (from)) 887 #define MGET(m, how, type) ((m) = m_get((how), (type))) 888 #define MGETHDR(m, how, type) ((m) = m_gethdr((how), (type))) 889 #define MCLGET(m, how) m_clget((m), (how)) 890 #define MEXTADD(m, buf, size, free, arg1, arg2, flags, type) \ 891 m_extadd((m), (char *)(buf), (size), (free), (arg1), (arg2), \ 892 (flags), (type)) 893 #define m_getm(m, len, how, type) \ 894 m_getm2((m), (len), (how), (type), M_PKTHDR) 895 896 /* 897 * Evaluate TRUE if it's safe to write to the mbuf m's data region (this can 898 * be both the local data payload, or an external buffer area, depending on 899 * whether M_EXT is set). 900 */ 901 #define M_WRITABLE(m) (!((m)->m_flags & M_RDONLY) && \ 902 (!(((m)->m_flags & M_EXT)) || \ 903 (m_extrefcnt(m) == 1))) 904 905 /* Check if the supplied mbuf has a packet header, or else panic. */ 906 #define M_ASSERTPKTHDR(m) \ 907 KASSERT((m) != NULL && (m)->m_flags & M_PKTHDR, \ 908 ("%s: no mbuf packet header!", __func__)) 909 910 /* 911 * Ensure that the supplied mbuf is a valid, non-free mbuf. 912 * 913 * XXX: Broken at the moment. Need some UMA magic to make it work again. 914 */ 915 #define M_ASSERTVALID(m) \ 916 KASSERT((((struct mbuf *)m)->m_flags & 0) == 0, \ 917 ("%s: attempted use of a free mbuf!", __func__)) 918 919 /* 920 * Return the address of the start of the buffer associated with an mbuf, 921 * handling external storage, packet-header mbufs, and regular data mbufs. 922 */ 923 #define M_START(m) \ 924 (((m)->m_flags & M_EXT) ? (m)->m_ext.ext_buf : \ 925 ((m)->m_flags & M_PKTHDR) ? &(m)->m_pktdat[0] : \ 926 &(m)->m_dat[0]) 927 928 /* 929 * Return the size of the buffer associated with an mbuf, handling external 930 * storage, packet-header mbufs, and regular data mbufs. 931 */ 932 #define M_SIZE(m) \ 933 (((m)->m_flags & M_EXT) ? (m)->m_ext.ext_size : \ 934 ((m)->m_flags & M_PKTHDR) ? MHLEN : \ 935 MLEN) 936 937 /* 938 * Set the m_data pointer of a newly allocated mbuf to place an object of the 939 * specified size at the end of the mbuf, longword aligned. 940 * 941 * NB: Historically, we had M_ALIGN(), MH_ALIGN(), and MEXT_ALIGN() as 942 * separate macros, each asserting that it was called at the proper moment. 943 * This required callers to themselves test the storage type and call the 944 * right one. Rather than require callers to be aware of those layout 945 * decisions, we centralize here. 946 */ 947 static __inline void 948 m_align(struct mbuf *m, int len) 949 { 950 #ifdef INVARIANTS 951 const char *msg = "%s: not a virgin mbuf"; 952 #endif 953 int adjust; 954 955 KASSERT(m->m_data == M_START(m), (msg, __func__)); 956 957 adjust = M_SIZE(m) - len; 958 m->m_data += adjust &~ (sizeof(long)-1); 959 } 960 961 #define M_ALIGN(m, len) m_align(m, len) 962 #define MH_ALIGN(m, len) m_align(m, len) 963 #define MEXT_ALIGN(m, len) m_align(m, len) 964 965 /* 966 * Compute the amount of space available before the current start of data in 967 * an mbuf. 968 * 969 * The M_WRITABLE() is a temporary, conservative safety measure: the burden 970 * of checking writability of the mbuf data area rests solely with the caller. 971 * 972 * NB: In previous versions, M_LEADINGSPACE() would only check M_WRITABLE() 973 * for mbufs with external storage. We now allow mbuf-embedded data to be 974 * read-only as well. 975 */ 976 #define M_LEADINGSPACE(m) \ 977 (M_WRITABLE(m) ? ((m)->m_data - M_START(m)) : 0) 978 979 /* 980 * Compute the amount of space available after the end of data in an mbuf. 981 * 982 * The M_WRITABLE() is a temporary, conservative safety measure: the burden 983 * of checking writability of the mbuf data area rests solely with the caller. 984 * 985 * NB: In previous versions, M_TRAILINGSPACE() would only check M_WRITABLE() 986 * for mbufs with external storage. We now allow mbuf-embedded data to be 987 * read-only as well. 988 */ 989 #define M_TRAILINGSPACE(m) \ 990 (M_WRITABLE(m) ? \ 991 ((M_START(m) + M_SIZE(m)) - ((m)->m_data + (m)->m_len)) : 0) 992 993 /* 994 * Arrange to prepend space of size plen to mbuf m. If a new mbuf must be 995 * allocated, how specifies whether to wait. If the allocation fails, the 996 * original mbuf chain is freed and m is set to NULL. 997 */ 998 #define M_PREPEND(m, plen, how) do { \ 999 struct mbuf **_mmp = &(m); \ 1000 struct mbuf *_mm = *_mmp; \ 1001 int _mplen = (plen); \ 1002 int __mhow = (how); \ 1003 \ 1004 MBUF_CHECKSLEEP(how); \ 1005 if (M_LEADINGSPACE(_mm) >= _mplen) { \ 1006 _mm->m_data -= _mplen; \ 1007 _mm->m_len += _mplen; \ 1008 } else \ 1009 _mm = m_prepend(_mm, _mplen, __mhow); \ 1010 if (_mm != NULL && _mm->m_flags & M_PKTHDR) \ 1011 _mm->m_pkthdr.len += _mplen; \ 1012 *_mmp = _mm; \ 1013 } while (0) 1014 1015 /* 1016 * Change mbuf to new type. This is a relatively expensive operation and 1017 * should be avoided. 1018 */ 1019 #define MCHTYPE(m, t) m_chtype((m), (t)) 1020 1021 /* Length to m_copy to copy all. */ 1022 #define M_COPYALL 1000000000 1023 1024 extern int max_datalen; /* MHLEN - max_hdr */ 1025 extern int max_hdr; /* Largest link + protocol header */ 1026 extern int max_linkhdr; /* Largest link-level header */ 1027 extern int max_protohdr; /* Largest protocol header */ 1028 extern int nmbclusters; /* Maximum number of clusters */ 1029 1030 /*- 1031 * Network packets may have annotations attached by affixing a list of 1032 * "packet tags" to the pkthdr structure. Packet tags are dynamically 1033 * allocated semi-opaque data structures that have a fixed header 1034 * (struct m_tag) that specifies the size of the memory block and a 1035 * <cookie,type> pair that identifies it. The cookie is a 32-bit unique 1036 * unsigned value used to identify a module or ABI. By convention this value 1037 * is chosen as the date+time that the module is created, expressed as the 1038 * number of seconds since the epoch (e.g., using date -u +'%s'). The type 1039 * value is an ABI/module-specific value that identifies a particular 1040 * annotation and is private to the module. For compatibility with systems 1041 * like OpenBSD that define packet tags w/o an ABI/module cookie, the value 1042 * PACKET_ABI_COMPAT is used to implement m_tag_get and m_tag_find 1043 * compatibility shim functions and several tag types are defined below. 1044 * Users that do not require compatibility should use a private cookie value 1045 * so that packet tag-related definitions can be maintained privately. 1046 * 1047 * Note that the packet tag returned by m_tag_alloc has the default memory 1048 * alignment implemented by malloc. To reference private data one can use a 1049 * construct like: 1050 * 1051 * struct m_tag *mtag = m_tag_alloc(...); 1052 * struct foo *p = (struct foo *)(mtag+1); 1053 * 1054 * if the alignment of struct m_tag is sufficient for referencing members of 1055 * struct foo. Otherwise it is necessary to embed struct m_tag within the 1056 * private data structure to insure proper alignment; e.g., 1057 * 1058 * struct foo { 1059 * struct m_tag tag; 1060 * ... 1061 * }; 1062 * struct foo *p = (struct foo *) m_tag_alloc(...); 1063 * struct m_tag *mtag = &p->tag; 1064 */ 1065 1066 /* 1067 * Persistent tags stay with an mbuf until the mbuf is reclaimed. Otherwise 1068 * tags are expected to ``vanish'' when they pass through a network 1069 * interface. For most interfaces this happens normally as the tags are 1070 * reclaimed when the mbuf is free'd. However in some special cases 1071 * reclaiming must be done manually. An example is packets that pass through 1072 * the loopback interface. Also, one must be careful to do this when 1073 * ``turning around'' packets (e.g., icmp_reflect). 1074 * 1075 * To mark a tag persistent bit-or this flag in when defining the tag id. 1076 * The tag will then be treated as described above. 1077 */ 1078 #define MTAG_PERSISTENT 0x800 1079 1080 #define PACKET_TAG_NONE 0 /* Nadda */ 1081 1082 /* Packet tags for use with PACKET_ABI_COMPAT. */ 1083 #define PACKET_TAG_IPSEC_IN_DONE 1 /* IPsec applied, in */ 1084 #define PACKET_TAG_IPSEC_OUT_DONE 2 /* IPsec applied, out */ 1085 #define PACKET_TAG_IPSEC_IN_CRYPTO_DONE 3 /* NIC IPsec crypto done */ 1086 #define PACKET_TAG_IPSEC_OUT_CRYPTO_NEEDED 4 /* NIC IPsec crypto req'ed */ 1087 #define PACKET_TAG_IPSEC_IN_COULD_DO_CRYPTO 5 /* NIC notifies IPsec */ 1088 #define PACKET_TAG_IPSEC_PENDING_TDB 6 /* Reminder to do IPsec */ 1089 #define PACKET_TAG_BRIDGE 7 /* Bridge processing done */ 1090 #define PACKET_TAG_GIF 8 /* GIF processing done */ 1091 #define PACKET_TAG_GRE 9 /* GRE processing done */ 1092 #define PACKET_TAG_IN_PACKET_CHECKSUM 10 /* NIC checksumming done */ 1093 #define PACKET_TAG_ENCAP 11 /* Encap. processing */ 1094 #define PACKET_TAG_IPSEC_SOCKET 12 /* IPSEC socket ref */ 1095 #define PACKET_TAG_IPSEC_HISTORY 13 /* IPSEC history */ 1096 #define PACKET_TAG_IPV6_INPUT 14 /* IPV6 input processing */ 1097 #define PACKET_TAG_DUMMYNET 15 /* dummynet info */ 1098 #define PACKET_TAG_DIVERT 17 /* divert info */ 1099 #define PACKET_TAG_IPFORWARD 18 /* ipforward info */ 1100 #define PACKET_TAG_MACLABEL (19 | MTAG_PERSISTENT) /* MAC label */ 1101 #define PACKET_TAG_PF (21 | MTAG_PERSISTENT) /* PF/ALTQ information */ 1102 #define PACKET_TAG_RTSOCKFAM 25 /* rtsock sa family */ 1103 #define PACKET_TAG_IPOPTIONS 27 /* Saved IP options */ 1104 #define PACKET_TAG_CARP 28 /* CARP info */ 1105 #define PACKET_TAG_IPSEC_NAT_T_PORTS 29 /* two uint16_t */ 1106 #define PACKET_TAG_ND_OUTGOING 30 /* ND outgoing */ 1107 1108 /* Specific cookies and tags. */ 1109 1110 /* Packet tag routines. */ 1111 struct m_tag *m_tag_alloc(u_int32_t, int, int, int); 1112 void m_tag_delete(struct mbuf *, struct m_tag *); 1113 void m_tag_delete_chain(struct mbuf *, struct m_tag *); 1114 void m_tag_free_default(struct m_tag *); 1115 struct m_tag *m_tag_locate(struct mbuf *, u_int32_t, int, struct m_tag *); 1116 struct m_tag *m_tag_copy(struct m_tag *, int); 1117 int m_tag_copy_chain(struct mbuf *, const struct mbuf *, int); 1118 void m_tag_delete_nonpersistent(struct mbuf *); 1119 1120 /* 1121 * Initialize the list of tags associated with an mbuf. 1122 */ 1123 static __inline void 1124 m_tag_init(struct mbuf *m) 1125 { 1126 1127 SLIST_INIT(&m->m_pkthdr.tags); 1128 } 1129 1130 /* 1131 * Set up the contents of a tag. Note that this does not fill in the free 1132 * method; the caller is expected to do that. 1133 * 1134 * XXX probably should be called m_tag_init, but that was already taken. 1135 */ 1136 static __inline void 1137 m_tag_setup(struct m_tag *t, u_int32_t cookie, int type, int len) 1138 { 1139 1140 t->m_tag_id = type; 1141 t->m_tag_len = len; 1142 t->m_tag_cookie = cookie; 1143 } 1144 1145 /* 1146 * Reclaim resources associated with a tag. 1147 */ 1148 static __inline void 1149 m_tag_free(struct m_tag *t) 1150 { 1151 1152 (*t->m_tag_free)(t); 1153 } 1154 1155 /* 1156 * Return the first tag associated with an mbuf. 1157 */ 1158 static __inline struct m_tag * 1159 m_tag_first(struct mbuf *m) 1160 { 1161 1162 return (SLIST_FIRST(&m->m_pkthdr.tags)); 1163 } 1164 1165 /* 1166 * Return the next tag in the list of tags associated with an mbuf. 1167 */ 1168 static __inline struct m_tag * 1169 m_tag_next(struct mbuf *m __unused, struct m_tag *t) 1170 { 1171 1172 return (SLIST_NEXT(t, m_tag_link)); 1173 } 1174 1175 /* 1176 * Prepend a tag to the list of tags associated with an mbuf. 1177 */ 1178 static __inline void 1179 m_tag_prepend(struct mbuf *m, struct m_tag *t) 1180 { 1181 1182 SLIST_INSERT_HEAD(&m->m_pkthdr.tags, t, m_tag_link); 1183 } 1184 1185 /* 1186 * Unlink a tag from the list of tags associated with an mbuf. 1187 */ 1188 static __inline void 1189 m_tag_unlink(struct mbuf *m, struct m_tag *t) 1190 { 1191 1192 SLIST_REMOVE(&m->m_pkthdr.tags, t, m_tag, m_tag_link); 1193 } 1194 1195 /* These are for OpenBSD compatibility. */ 1196 #define MTAG_ABI_COMPAT 0 /* compatibility ABI */ 1197 1198 static __inline struct m_tag * 1199 m_tag_get(int type, int length, int wait) 1200 { 1201 return (m_tag_alloc(MTAG_ABI_COMPAT, type, length, wait)); 1202 } 1203 1204 static __inline struct m_tag * 1205 m_tag_find(struct mbuf *m, int type, struct m_tag *start) 1206 { 1207 return (SLIST_EMPTY(&m->m_pkthdr.tags) ? (struct m_tag *)NULL : 1208 m_tag_locate(m, MTAG_ABI_COMPAT, type, start)); 1209 } 1210 1211 static __inline struct mbuf * 1212 m_free(struct mbuf *m) 1213 { 1214 struct mbuf *n = m->m_next; 1215 1216 MBUF_PROBE1(m__free, m); 1217 if ((m->m_flags & (M_PKTHDR|M_NOFREE)) == (M_PKTHDR|M_NOFREE)) 1218 m_tag_delete_chain(m, NULL); 1219 if (m->m_flags & M_EXT) 1220 mb_free_ext(m); 1221 else if ((m->m_flags & M_NOFREE) == 0) 1222 uma_zfree(zone_mbuf, m); 1223 return (n); 1224 } 1225 1226 static __inline int 1227 rt_m_getfib(struct mbuf *m) 1228 { 1229 KASSERT(m->m_flags & M_PKTHDR , ("Attempt to get FIB from non header mbuf.")); 1230 return (m->m_pkthdr.fibnum); 1231 } 1232 1233 #define M_GETFIB(_m) rt_m_getfib(_m) 1234 1235 #define M_SETFIB(_m, _fib) do { \ 1236 KASSERT((_m)->m_flags & M_PKTHDR, ("Attempt to set FIB on non header mbuf.")); \ 1237 ((_m)->m_pkthdr.fibnum) = (_fib); \ 1238 } while (0) 1239 1240 /* flags passed as first argument for "m_ether_tcpip_hash()" */ 1241 #define MBUF_HASHFLAG_L2 (1 << 2) 1242 #define MBUF_HASHFLAG_L3 (1 << 3) 1243 #define MBUF_HASHFLAG_L4 (1 << 4) 1244 1245 /* mbuf hashing helper routines */ 1246 uint32_t m_ether_tcpip_hash_init(void); 1247 uint32_t m_ether_tcpip_hash(const uint32_t, const struct mbuf *, const uint32_t); 1248 1249 #ifdef MBUF_PROFILING 1250 void m_profile(struct mbuf *m); 1251 #define M_PROFILE(m) m_profile(m) 1252 #else 1253 #define M_PROFILE(m) 1254 #endif 1255 1256 struct mbufq { 1257 STAILQ_HEAD(, mbuf) mq_head; 1258 int mq_len; 1259 int mq_maxlen; 1260 }; 1261 1262 static inline void 1263 mbufq_init(struct mbufq *mq, int maxlen) 1264 { 1265 1266 STAILQ_INIT(&mq->mq_head); 1267 mq->mq_maxlen = maxlen; 1268 mq->mq_len = 0; 1269 } 1270 1271 static inline struct mbuf * 1272 mbufq_flush(struct mbufq *mq) 1273 { 1274 struct mbuf *m; 1275 1276 m = STAILQ_FIRST(&mq->mq_head); 1277 STAILQ_INIT(&mq->mq_head); 1278 mq->mq_len = 0; 1279 return (m); 1280 } 1281 1282 static inline void 1283 mbufq_drain(struct mbufq *mq) 1284 { 1285 struct mbuf *m, *n; 1286 1287 n = mbufq_flush(mq); 1288 while ((m = n) != NULL) { 1289 n = STAILQ_NEXT(m, m_stailqpkt); 1290 m_freem(m); 1291 } 1292 } 1293 1294 static inline struct mbuf * 1295 mbufq_first(const struct mbufq *mq) 1296 { 1297 1298 return (STAILQ_FIRST(&mq->mq_head)); 1299 } 1300 1301 static inline struct mbuf * 1302 mbufq_last(const struct mbufq *mq) 1303 { 1304 1305 return (STAILQ_LAST(&mq->mq_head, mbuf, m_stailqpkt)); 1306 } 1307 1308 static inline int 1309 mbufq_full(const struct mbufq *mq) 1310 { 1311 1312 return (mq->mq_len >= mq->mq_maxlen); 1313 } 1314 1315 static inline int 1316 mbufq_len(const struct mbufq *mq) 1317 { 1318 1319 return (mq->mq_len); 1320 } 1321 1322 static inline int 1323 mbufq_enqueue(struct mbufq *mq, struct mbuf *m) 1324 { 1325 1326 if (mbufq_full(mq)) 1327 return (ENOBUFS); 1328 STAILQ_INSERT_TAIL(&mq->mq_head, m, m_stailqpkt); 1329 mq->mq_len++; 1330 return (0); 1331 } 1332 1333 static inline struct mbuf * 1334 mbufq_dequeue(struct mbufq *mq) 1335 { 1336 struct mbuf *m; 1337 1338 m = STAILQ_FIRST(&mq->mq_head); 1339 if (m) { 1340 STAILQ_REMOVE_HEAD(&mq->mq_head, m_stailqpkt); 1341 m->m_nextpkt = NULL; 1342 mq->mq_len--; 1343 } 1344 return (m); 1345 } 1346 1347 static inline void 1348 mbufq_prepend(struct mbufq *mq, struct mbuf *m) 1349 { 1350 1351 STAILQ_INSERT_HEAD(&mq->mq_head, m, m_stailqpkt); 1352 mq->mq_len++; 1353 } 1354 1355 /* 1356 * Note: this doesn't enforce the maximum list size for dst. 1357 */ 1358 static inline void 1359 mbufq_concat(struct mbufq *mq_dst, struct mbufq *mq_src) 1360 { 1361 1362 mq_dst->mq_len += mq_src->mq_len; 1363 STAILQ_CONCAT(&mq_dst->mq_head, &mq_src->mq_head); 1364 mq_src->mq_len = 0; 1365 } 1366 1367 #ifdef _SYS_TIMESPEC_H_ 1368 static inline void 1369 mbuf_tstmp2timespec(struct mbuf *m, struct timespec *ts) 1370 { 1371 1372 KASSERT((m->m_flags & M_PKTHDR) != 0, ("mbuf %p no M_PKTHDR", m)); 1373 KASSERT((m->m_flags & M_TSTMP) != 0, ("mbuf %p no M_TSTMP", m)); 1374 ts->tv_sec = m->m_pkthdr.rcv_tstmp / 1000000000; 1375 ts->tv_nsec = m->m_pkthdr.rcv_tstmp % 1000000000; 1376 } 1377 #endif 1378 1379 #ifdef NETDUMP 1380 /* Invoked from the netdump client code. */ 1381 void netdump_mbuf_drain(void); 1382 void netdump_mbuf_dump(void); 1383 void netdump_mbuf_reinit(int nmbuf, int nclust, int clsize); 1384 #endif 1385 1386 #endif /* _KERNEL */ 1387 #endif /* !_SYS_MBUF_H_ */ 1388