1 /* $NetBSD: svc.h,v 1.17 2000/06/02 22:57:56 fvdl Exp $ */ 2 3 /*- 4 * SPDX-License-Identifier: BSD-3-Clause 5 * 6 * Copyright (c) 2009, Sun Microsystems, Inc. 7 * All rights reserved. 8 * 9 * Redistribution and use in source and binary forms, with or without 10 * modification, are permitted provided that the following conditions are met: 11 * - Redistributions of source code must retain the above copyright notice, 12 * this list of conditions and the following disclaimer. 13 * - Redistributions in binary form must reproduce the above copyright notice, 14 * this list of conditions and the following disclaimer in the documentation 15 * and/or other materials provided with the distribution. 16 * - Neither the name of Sun Microsystems, Inc. nor the names of its 17 * contributors may be used to endorse or promote products derived 18 * from this software without specific prior written permission. 19 * 20 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" 21 * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE 22 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE 23 * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE 24 * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR 25 * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF 26 * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS 27 * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN 28 * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) 29 * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE 30 * POSSIBILITY OF SUCH DAMAGE. 31 * 32 * from: @(#)svc.h 1.35 88/12/17 SMI 33 * from: @(#)svc.h 1.27 94/04/25 SMI 34 * $FreeBSD$ 35 */ 36 37 /* 38 * svc.h, Server-side remote procedure call interface. 39 * 40 * Copyright (C) 1986-1993 by Sun Microsystems, Inc. 41 */ 42 43 #ifndef _RPC_SVC_H 44 #define _RPC_SVC_H 45 #include <sys/cdefs.h> 46 47 #ifdef _KERNEL 48 #include <sys/queue.h> 49 #include <sys/_lock.h> 50 #include <sys/_mutex.h> 51 #include <sys/_sx.h> 52 #include <sys/condvar.h> 53 #include <sys/sysctl.h> 54 #endif 55 56 /* 57 * This interface must manage two items concerning remote procedure calling: 58 * 59 * 1) An arbitrary number of transport connections upon which rpc requests 60 * are received. The two most notable transports are TCP and UDP; they are 61 * created and registered by routines in svc_tcp.c and svc_udp.c, respectively; 62 * they in turn call xprt_register and xprt_unregister. 63 * 64 * 2) An arbitrary number of locally registered services. Services are 65 * described by the following four data: program number, version number, 66 * "service dispatch" function, a transport handle, and a boolean that 67 * indicates whether or not the exported program should be registered with a 68 * local binder service; if true the program's number and version and the 69 * port number from the transport handle are registered with the binder. 70 * These data are registered with the rpc svc system via svc_register. 71 * 72 * A service's dispatch function is called whenever an rpc request comes in 73 * on a transport. The request's program and version numbers must match 74 * those of the registered service. The dispatch function is passed two 75 * parameters, struct svc_req * and SVCXPRT *, defined below. 76 */ 77 78 /* 79 * Service control requests 80 */ 81 #define SVCGET_VERSQUIET 1 82 #define SVCSET_VERSQUIET 2 83 #define SVCGET_CONNMAXREC 3 84 #define SVCSET_CONNMAXREC 4 85 86 /* 87 * Operations for rpc_control(). 88 */ 89 #define RPC_SVC_CONNMAXREC_SET 0 /* set max rec size, enable nonblock */ 90 #define RPC_SVC_CONNMAXREC_GET 1 91 92 enum xprt_stat { 93 XPRT_DIED, 94 XPRT_MOREREQS, 95 XPRT_IDLE 96 }; 97 98 struct __rpc_svcxprt; 99 struct mbuf; 100 101 struct xp_ops { 102 #ifdef _KERNEL 103 /* receive incoming requests */ 104 bool_t (*xp_recv)(struct __rpc_svcxprt *, struct rpc_msg *, 105 struct sockaddr **, struct mbuf **); 106 /* get transport status */ 107 enum xprt_stat (*xp_stat)(struct __rpc_svcxprt *); 108 /* get transport acknowledge sequence */ 109 bool_t (*xp_ack)(struct __rpc_svcxprt *, uint32_t *); 110 /* send reply */ 111 bool_t (*xp_reply)(struct __rpc_svcxprt *, struct rpc_msg *, 112 struct sockaddr *, struct mbuf *, uint32_t *); 113 /* destroy this struct */ 114 void (*xp_destroy)(struct __rpc_svcxprt *); 115 /* catch-all function */ 116 bool_t (*xp_control)(struct __rpc_svcxprt *, const u_int, void *); 117 #else 118 /* receive incoming requests */ 119 bool_t (*xp_recv)(struct __rpc_svcxprt *, struct rpc_msg *); 120 /* get transport status */ 121 enum xprt_stat (*xp_stat)(struct __rpc_svcxprt *); 122 /* get arguments */ 123 bool_t (*xp_getargs)(struct __rpc_svcxprt *, xdrproc_t, void *); 124 /* send reply */ 125 bool_t (*xp_reply)(struct __rpc_svcxprt *, struct rpc_msg *); 126 /* free mem allocated for args */ 127 bool_t (*xp_freeargs)(struct __rpc_svcxprt *, xdrproc_t, void *); 128 /* destroy this struct */ 129 void (*xp_destroy)(struct __rpc_svcxprt *); 130 #endif 131 }; 132 133 #ifndef _KERNEL 134 struct xp_ops2 { 135 /* catch-all function */ 136 bool_t (*xp_control)(struct __rpc_svcxprt *, const u_int, void *); 137 }; 138 #endif 139 140 #ifdef _KERNEL 141 struct __rpc_svcpool; 142 struct __rpc_svcgroup; 143 struct __rpc_svcthread; 144 #endif 145 146 /* 147 * Server side transport handle. In the kernel, transports have a 148 * reference count which tracks the number of currently assigned 149 * worker threads plus one for the service pool's reference. 150 * For NFSv4.1 sessions, a reference is also held for a backchannel. 151 * xp_p2 - Points to the CLIENT structure for the RPC server end 152 * (the client end for callbacks). 153 * Points to the private structure (cl_private) for the 154 * CLIENT structure for the RPC client end (the server 155 * end for callbacks). 156 */ 157 typedef struct __rpc_svcxprt { 158 #ifdef _KERNEL 159 volatile u_int xp_refs; 160 struct sx xp_lock; 161 struct __rpc_svcpool *xp_pool; /* owning pool (see below) */ 162 struct __rpc_svcgroup *xp_group; /* owning group (see below) */ 163 TAILQ_ENTRY(__rpc_svcxprt) xp_link; 164 TAILQ_ENTRY(__rpc_svcxprt) xp_alink; 165 bool_t xp_registered; /* xprt_register has been called */ 166 bool_t xp_active; /* xprt_active has been called */ 167 struct __rpc_svcthread *xp_thread; /* assigned service thread */ 168 struct socket* xp_socket; 169 const struct xp_ops *xp_ops; 170 char *xp_netid; /* network token */ 171 struct sockaddr_storage xp_ltaddr; /* local transport address */ 172 struct sockaddr_storage xp_rtaddr; /* remote transport address */ 173 void *xp_p1; /* private: for use by svc ops */ 174 void *xp_p2; /* private: for use by svc ops */ 175 void *xp_p3; /* private: for use by svc lib */ 176 int xp_type; /* transport type */ 177 int xp_idletimeout; /* idle time before closing */ 178 time_t xp_lastactive; /* time of last RPC */ 179 uint64_t xp_sockref; /* set by nfsv4 to identify socket */ 180 int xp_upcallset; /* socket upcall is set up */ 181 uint32_t xp_snd_cnt; /* # of bytes to send to socket */ 182 uint32_t xp_snt_cnt; /* # of bytes sent to socket */ 183 bool_t xp_dontrcv; /* Do not receive on the socket */ 184 uint32_t xp_tls; /* RPC-over-TLS on socket */ 185 uint64_t xp_sslsec; /* Userland SSL * */ 186 uint64_t xp_sslusec; 187 uint64_t xp_sslrefno; 188 int xp_ngrps; /* Cred. from TLS cert. */ 189 uid_t xp_uid; 190 gid_t *xp_gidp; 191 #else 192 int xp_fd; 193 u_short xp_port; /* associated port number */ 194 const struct xp_ops *xp_ops; 195 int xp_addrlen; /* length of remote address */ 196 struct sockaddr_in xp_raddr; /* remote addr. (backward ABI compat) */ 197 /* XXX - fvdl stick this here for ABI backward compat reasons */ 198 const struct xp_ops2 *xp_ops2; 199 char *xp_tp; /* transport provider device name */ 200 char *xp_netid; /* network token */ 201 struct netbuf xp_ltaddr; /* local transport address */ 202 struct netbuf xp_rtaddr; /* remote transport address */ 203 struct opaque_auth xp_verf; /* raw response verifier */ 204 void *xp_p1; /* private: for use by svc ops */ 205 void *xp_p2; /* private: for use by svc ops */ 206 void *xp_p3; /* private: for use by svc lib */ 207 int xp_type; /* transport type */ 208 #endif 209 } SVCXPRT; 210 211 /* 212 * Interface to server-side authentication flavors. 213 */ 214 typedef struct __rpc_svcauth { 215 const struct svc_auth_ops { 216 #ifdef _KERNEL 217 int (*svc_ah_wrap)(struct __rpc_svcauth *, struct mbuf **); 218 int (*svc_ah_unwrap)(struct __rpc_svcauth *, struct mbuf **); 219 void (*svc_ah_release)(struct __rpc_svcauth *); 220 #else 221 int (*svc_ah_wrap)(struct __rpc_svcauth *, XDR *, 222 xdrproc_t, caddr_t); 223 int (*svc_ah_unwrap)(struct __rpc_svcauth *, XDR *, 224 xdrproc_t, caddr_t); 225 #endif 226 } *svc_ah_ops; 227 void *svc_ah_private; 228 } SVCAUTH; 229 230 /* 231 * Server transport extensions (accessed via xp_p3). 232 */ 233 typedef struct __rpc_svcxprt_ext { 234 int xp_flags; /* versquiet */ 235 SVCAUTH xp_auth; /* interface to auth methods */ 236 } SVCXPRT_EXT; 237 238 #ifdef _KERNEL 239 240 /* 241 * The services list 242 * Each entry represents a set of procedures (an rpc program). 243 * The dispatch routine takes request structs and runs the 244 * appropriate procedure. 245 */ 246 struct svc_callout { 247 TAILQ_ENTRY(svc_callout) sc_link; 248 rpcprog_t sc_prog; 249 rpcvers_t sc_vers; 250 char *sc_netid; 251 void (*sc_dispatch)(struct svc_req *, SVCXPRT *); 252 }; 253 TAILQ_HEAD(svc_callout_list, svc_callout); 254 255 /* 256 * The services connection loss list 257 * The dispatch routine takes request structs and runs the 258 * appropriate procedure. 259 */ 260 struct svc_loss_callout { 261 TAILQ_ENTRY(svc_loss_callout) slc_link; 262 void (*slc_dispatch)(SVCXPRT *); 263 }; 264 TAILQ_HEAD(svc_loss_callout_list, svc_loss_callout); 265 266 /* 267 * Service request 268 */ 269 struct svc_req { 270 STAILQ_ENTRY(svc_req) rq_link; /* list of requests for a thread */ 271 struct __rpc_svcthread *rq_thread; /* thread which is to execute this */ 272 uint32_t rq_xid; /* RPC transaction ID */ 273 uint32_t rq_prog; /* service program number */ 274 uint32_t rq_vers; /* service protocol version */ 275 uint32_t rq_proc; /* the desired procedure */ 276 size_t rq_size; /* space used by request */ 277 struct mbuf *rq_args; /* XDR-encoded procedure arguments */ 278 struct opaque_auth rq_cred; /* raw creds from the wire */ 279 struct opaque_auth rq_verf; /* verifier for the reply */ 280 void *rq_clntcred; /* read only cooked cred */ 281 SVCAUTH rq_auth; /* interface to auth methods */ 282 SVCXPRT *rq_xprt; /* associated transport */ 283 struct sockaddr *rq_addr; /* reply address or NULL if connected */ 284 void *rq_p1; /* application workspace */ 285 int rq_p2; /* application workspace */ 286 uint64_t rq_p3; /* application workspace */ 287 uint32_t rq_reply_seq; /* reply socket sequence # */ 288 char rq_credarea[3*MAX_AUTH_BYTES]; 289 }; 290 STAILQ_HEAD(svc_reqlist, svc_req); 291 292 #define svc_getrpccaller(rq) \ 293 ((rq)->rq_addr ? (rq)->rq_addr : \ 294 (struct sockaddr *) &(rq)->rq_xprt->xp_rtaddr) 295 296 /* 297 * This structure is used to manage a thread which is executing 298 * requests from a service pool. A service thread is in one of three 299 * states: 300 * 301 * SVCTHREAD_SLEEPING waiting for a request to process 302 * SVCTHREAD_ACTIVE processing a request 303 * SVCTHREAD_EXITING exiting after finishing current request 304 * 305 * Threads which have no work to process sleep on the pool's sp_active 306 * list. When a transport becomes active, it is assigned a service 307 * thread to read and execute pending RPCs. 308 */ 309 typedef struct __rpc_svcthread { 310 struct mtx_padalign st_lock; /* protects st_reqs field */ 311 struct __rpc_svcpool *st_pool; 312 SVCXPRT *st_xprt; /* transport we are processing */ 313 struct svc_reqlist st_reqs; /* RPC requests to execute */ 314 struct cv st_cond; /* sleeping for work */ 315 LIST_ENTRY(__rpc_svcthread) st_ilink; /* idle threads list */ 316 LIST_ENTRY(__rpc_svcthread) st_alink; /* application thread list */ 317 int st_p2; /* application workspace */ 318 uint64_t st_p3; /* application workspace */ 319 } SVCTHREAD; 320 LIST_HEAD(svcthread_list, __rpc_svcthread); 321 322 /* 323 * A thread group contain all information needed to assign subset of 324 * transports to subset of threads. On systems with many CPUs and many 325 * threads that allows to reduce lock congestion and improve performance. 326 * Hundreds of threads on dozens of CPUs sharing the single pool lock do 327 * not scale well otherwise. 328 */ 329 TAILQ_HEAD(svcxprt_list, __rpc_svcxprt); 330 enum svcpool_state { 331 SVCPOOL_INIT, /* svc_run not called yet */ 332 SVCPOOL_ACTIVE, /* normal running state */ 333 SVCPOOL_THREADWANTED, /* new service thread requested */ 334 SVCPOOL_THREADSTARTING, /* new service thread started */ 335 SVCPOOL_CLOSING /* svc_exit called */ 336 }; 337 typedef struct __rpc_svcgroup { 338 struct mtx_padalign sg_lock; /* protect the thread/req lists */ 339 struct __rpc_svcpool *sg_pool; 340 enum svcpool_state sg_state; /* current pool state */ 341 struct svcxprt_list sg_xlist; /* all transports in the group */ 342 struct svcxprt_list sg_active; /* transports needing service */ 343 struct svcthread_list sg_idlethreads; /* idle service threads */ 344 345 int sg_minthreads; /* minimum service thread count */ 346 int sg_maxthreads; /* maximum service thread count */ 347 int sg_threadcount; /* current service thread count */ 348 time_t sg_lastcreatetime; /* when we last started a thread */ 349 time_t sg_lastidlecheck; /* when we last checked idle transports */ 350 } SVCGROUP; 351 352 /* 353 * In the kernel, we can't use global variables to store lists of 354 * transports etc. since otherwise we could not have two unrelated RPC 355 * services running, each on its own thread. We solve this by 356 * importing a tiny part of a Solaris kernel concept, SVCPOOL. 357 * 358 * A service pool contains a set of transports and service callbacks 359 * for a set of related RPC services. The pool handle should be passed 360 * when creating new transports etc. Future work may include extending 361 * this to support something similar to the Solaris multi-threaded RPC 362 * server. 363 */ 364 typedef SVCTHREAD *pool_assign_fn(SVCTHREAD *, struct svc_req *); 365 typedef void pool_done_fn(SVCTHREAD *, struct svc_req *); 366 #define SVC_MAXGROUPS 16 367 typedef struct __rpc_svcpool { 368 struct mtx_padalign sp_lock; /* protect the transport lists */ 369 const char *sp_name; /* pool name (e.g. "nfsd", "NLM" */ 370 enum svcpool_state sp_state; /* current pool state */ 371 struct proc *sp_proc; /* process which is in svc_run */ 372 struct svc_callout_list sp_callouts; /* (prog,vers)->dispatch list */ 373 struct svc_loss_callout_list sp_lcallouts; /* loss->dispatch list */ 374 int sp_minthreads; /* minimum service thread count */ 375 int sp_maxthreads; /* maximum service thread count */ 376 377 /* 378 * Hooks to allow an application to control request to thread 379 * placement. 380 */ 381 pool_assign_fn *sp_assign; 382 pool_done_fn *sp_done; 383 384 /* 385 * These variables are used to put an upper bound on the 386 * amount of memory used by RPC requests which are queued 387 * waiting for execution. 388 */ 389 unsigned long sp_space_low; 390 unsigned long sp_space_high; 391 unsigned long sp_space_used; 392 unsigned long sp_space_used_highest; 393 bool_t sp_space_throttled; 394 int sp_space_throttle_count; 395 396 struct replay_cache *sp_rcache; /* optional replay cache */ 397 struct sysctl_ctx_list sp_sysctl; 398 399 int sp_groupcount; /* Number of groups in the pool. */ 400 int sp_nextgroup; /* Next group to assign port. */ 401 SVCGROUP sp_groups[SVC_MAXGROUPS]; /* Thread/port groups. */ 402 } SVCPOOL; 403 404 #else 405 406 /* 407 * Service request 408 */ 409 struct svc_req { 410 uint32_t rq_prog; /* service program number */ 411 uint32_t rq_vers; /* service protocol version */ 412 uint32_t rq_proc; /* the desired procedure */ 413 struct opaque_auth rq_cred; /* raw creds from the wire */ 414 void *rq_clntcred; /* read only cooked cred */ 415 SVCXPRT *rq_xprt; /* associated transport */ 416 }; 417 418 /* 419 * Approved way of getting address of caller 420 */ 421 #define svc_getrpccaller(x) (&(x)->xp_rtaddr) 422 423 #endif 424 425 /* 426 * Operations defined on an SVCXPRT handle 427 * 428 * SVCXPRT *xprt; 429 * struct rpc_msg *msg; 430 * xdrproc_t xargs; 431 * void * argsp; 432 */ 433 #ifdef _KERNEL 434 435 #define SVC_ACQUIRE(xprt) \ 436 refcount_acquire(&(xprt)->xp_refs) 437 438 #define SVC_RELEASE(xprt) \ 439 if (refcount_release(&(xprt)->xp_refs)) \ 440 SVC_DESTROY(xprt) 441 442 #define SVC_RECV(xprt, msg, addr, args) \ 443 (*(xprt)->xp_ops->xp_recv)((xprt), (msg), (addr), (args)) 444 445 #define SVC_STAT(xprt) \ 446 (*(xprt)->xp_ops->xp_stat)(xprt) 447 448 #define SVC_ACK(xprt, ack) \ 449 ((xprt)->xp_ops->xp_ack == NULL ? FALSE : \ 450 ((ack) == NULL ? TRUE : (*(xprt)->xp_ops->xp_ack)((xprt), (ack)))) 451 452 #define SVC_REPLY(xprt, msg, addr, m, seq) \ 453 (*(xprt)->xp_ops->xp_reply) ((xprt), (msg), (addr), (m), (seq)) 454 455 #define SVC_DESTROY(xprt) \ 456 (*(xprt)->xp_ops->xp_destroy)(xprt) 457 458 #define SVC_CONTROL(xprt, rq, in) \ 459 (*(xprt)->xp_ops->xp_control)((xprt), (rq), (in)) 460 461 #else 462 463 #define SVC_RECV(xprt, msg) \ 464 (*(xprt)->xp_ops->xp_recv)((xprt), (msg)) 465 #define svc_recv(xprt, msg) \ 466 (*(xprt)->xp_ops->xp_recv)((xprt), (msg)) 467 468 #define SVC_STAT(xprt) \ 469 (*(xprt)->xp_ops->xp_stat)(xprt) 470 #define svc_stat(xprt) \ 471 (*(xprt)->xp_ops->xp_stat)(xprt) 472 473 #define SVC_GETARGS(xprt, xargs, argsp) \ 474 (*(xprt)->xp_ops->xp_getargs)((xprt), (xargs), (argsp)) 475 #define svc_getargs(xprt, xargs, argsp) \ 476 (*(xprt)->xp_ops->xp_getargs)((xprt), (xargs), (argsp)) 477 478 #define SVC_REPLY(xprt, msg) \ 479 (*(xprt)->xp_ops->xp_reply) ((xprt), (msg)) 480 #define svc_reply(xprt, msg) \ 481 (*(xprt)->xp_ops->xp_reply) ((xprt), (msg)) 482 483 #define SVC_FREEARGS(xprt, xargs, argsp) \ 484 (*(xprt)->xp_ops->xp_freeargs)((xprt), (xargs), (argsp)) 485 #define svc_freeargs(xprt, xargs, argsp) \ 486 (*(xprt)->xp_ops->xp_freeargs)((xprt), (xargs), (argsp)) 487 488 #define SVC_DESTROY(xprt) \ 489 (*(xprt)->xp_ops->xp_destroy)(xprt) 490 #define svc_destroy(xprt) \ 491 (*(xprt)->xp_ops->xp_destroy)(xprt) 492 493 #define SVC_CONTROL(xprt, rq, in) \ 494 (*(xprt)->xp_ops2->xp_control)((xprt), (rq), (in)) 495 496 #endif 497 498 #define SVC_EXT(xprt) \ 499 ((SVCXPRT_EXT *) xprt->xp_p3) 500 501 #define SVC_AUTH(xprt) \ 502 (SVC_EXT(xprt)->xp_auth) 503 504 /* 505 * Operations defined on an SVCAUTH handle 506 */ 507 #ifdef _KERNEL 508 #define SVCAUTH_WRAP(auth, mp) \ 509 ((auth)->svc_ah_ops->svc_ah_wrap(auth, mp)) 510 #define SVCAUTH_UNWRAP(auth, mp) \ 511 ((auth)->svc_ah_ops->svc_ah_unwrap(auth, mp)) 512 #define SVCAUTH_RELEASE(auth) \ 513 ((auth)->svc_ah_ops->svc_ah_release(auth)) 514 #else 515 #define SVCAUTH_WRAP(auth, xdrs, xfunc, xwhere) \ 516 ((auth)->svc_ah_ops->svc_ah_wrap(auth, xdrs, xfunc, xwhere)) 517 #define SVCAUTH_UNWRAP(auth, xdrs, xfunc, xwhere) \ 518 ((auth)->svc_ah_ops->svc_ah_unwrap(auth, xdrs, xfunc, xwhere)) 519 #endif 520 521 /* 522 * Service registration 523 * 524 * svc_reg(xprt, prog, vers, dispatch, nconf) 525 * const SVCXPRT *xprt; 526 * const rpcprog_t prog; 527 * const rpcvers_t vers; 528 * const void (*dispatch)(); 529 * const struct netconfig *nconf; 530 */ 531 532 __BEGIN_DECLS 533 extern bool_t svc_reg(SVCXPRT *, const rpcprog_t, const rpcvers_t, 534 void (*)(struct svc_req *, SVCXPRT *), 535 const struct netconfig *); 536 __END_DECLS 537 538 /* 539 * Service un-registration 540 * 541 * svc_unreg(prog, vers) 542 * const rpcprog_t prog; 543 * const rpcvers_t vers; 544 */ 545 546 __BEGIN_DECLS 547 #ifdef _KERNEL 548 extern void svc_unreg(SVCPOOL *, const rpcprog_t, const rpcvers_t); 549 #else 550 extern void svc_unreg(const rpcprog_t, const rpcvers_t); 551 #endif 552 __END_DECLS 553 554 #ifdef _KERNEL 555 /* 556 * Service connection loss registration 557 * 558 * svc_loss_reg(xprt, dispatch) 559 * const SVCXPRT *xprt; 560 * const void (*dispatch)(); 561 */ 562 563 __BEGIN_DECLS 564 extern bool_t svc_loss_reg(SVCXPRT *, void (*)(SVCXPRT *)); 565 __END_DECLS 566 567 /* 568 * Service connection loss un-registration 569 * 570 * svc_loss_unreg(xprt, dispatch) 571 * const SVCXPRT *xprt; 572 * const void (*dispatch)(); 573 */ 574 575 __BEGIN_DECLS 576 extern void svc_loss_unreg(SVCPOOL *, void (*)(SVCXPRT *)); 577 __END_DECLS 578 #endif 579 580 /* 581 * Transport registration. 582 * 583 * xprt_register(xprt) 584 * SVCXPRT *xprt; 585 */ 586 __BEGIN_DECLS 587 extern void xprt_register(SVCXPRT *); 588 __END_DECLS 589 590 /* 591 * Transport un-register 592 * 593 * xprt_unregister(xprt) 594 * SVCXPRT *xprt; 595 */ 596 __BEGIN_DECLS 597 extern void xprt_unregister(SVCXPRT *); 598 extern void __xprt_unregister_unlocked(SVCXPRT *); 599 __END_DECLS 600 601 #ifdef _KERNEL 602 603 /* 604 * Called when a transport has pending requests. 605 */ 606 __BEGIN_DECLS 607 extern void xprt_active(SVCXPRT *); 608 extern void xprt_inactive(SVCXPRT *); 609 extern void xprt_inactive_locked(SVCXPRT *); 610 extern void xprt_inactive_self(SVCXPRT *); 611 __END_DECLS 612 613 #endif 614 615 /* 616 * When the service routine is called, it must first check to see if it 617 * knows about the procedure; if not, it should call svcerr_noproc 618 * and return. If so, it should deserialize its arguments via 619 * SVC_GETARGS (defined above). If the deserialization does not work, 620 * svcerr_decode should be called followed by a return. Successful 621 * decoding of the arguments should be followed the execution of the 622 * procedure's code and a call to svc_sendreply. 623 * 624 * Also, if the service refuses to execute the procedure due to too- 625 * weak authentication parameters, svcerr_weakauth should be called. 626 * Note: do not confuse access-control failure with weak authentication! 627 * 628 * NB: In pure implementations of rpc, the caller always waits for a reply 629 * msg. This message is sent when svc_sendreply is called. 630 * Therefore pure service implementations should always call 631 * svc_sendreply even if the function logically returns void; use 632 * xdr.h - xdr_void for the xdr routine. HOWEVER, tcp based rpc allows 633 * for the abuse of pure rpc via batched calling or pipelining. In the 634 * case of a batched call, svc_sendreply should NOT be called since 635 * this would send a return message, which is what batching tries to avoid. 636 * It is the service/protocol writer's responsibility to know which calls are 637 * batched and which are not. Warning: responding to batch calls may 638 * deadlock the caller and server processes! 639 */ 640 641 __BEGIN_DECLS 642 #ifdef _KERNEL 643 extern bool_t svc_sendreply(struct svc_req *, xdrproc_t, void *); 644 extern bool_t svc_sendreply_mbuf(struct svc_req *, struct mbuf *); 645 extern void svcerr_decode(struct svc_req *); 646 extern void svcerr_weakauth(struct svc_req *); 647 extern void svcerr_noproc(struct svc_req *); 648 extern void svcerr_progvers(struct svc_req *, rpcvers_t, rpcvers_t); 649 extern void svcerr_auth(struct svc_req *, enum auth_stat); 650 extern void svcerr_noprog(struct svc_req *); 651 extern void svcerr_systemerr(struct svc_req *); 652 #else 653 extern bool_t svc_sendreply(SVCXPRT *, xdrproc_t, void *); 654 extern void svcerr_decode(SVCXPRT *); 655 extern void svcerr_weakauth(SVCXPRT *); 656 extern void svcerr_noproc(SVCXPRT *); 657 extern void svcerr_progvers(SVCXPRT *, rpcvers_t, rpcvers_t); 658 extern void svcerr_auth(SVCXPRT *, enum auth_stat); 659 extern void svcerr_noprog(SVCXPRT *); 660 extern void svcerr_systemerr(SVCXPRT *); 661 #endif 662 extern int rpc_reg(rpcprog_t, rpcvers_t, rpcproc_t, 663 char *(*)(char *), xdrproc_t, xdrproc_t, 664 char *); 665 __END_DECLS 666 667 /* 668 * Lowest level dispatching -OR- who owns this process anyway. 669 * Somebody has to wait for incoming requests and then call the correct 670 * service routine. The routine svc_run does infinite waiting; i.e., 671 * svc_run never returns. 672 * Since another (co-existent) package may wish to selectively wait for 673 * incoming calls or other events outside of the rpc architecture, the 674 * routine svc_getreq is provided. It must be passed readfds, the 675 * "in-place" results of a select system call (see select, section 2). 676 */ 677 678 #ifndef _KERNEL 679 /* 680 * Global keeper of rpc service descriptors in use 681 * dynamic; must be inspected before each call to select 682 */ 683 extern int svc_maxfd; 684 #ifdef FD_SETSIZE 685 extern fd_set svc_fdset; 686 #define svc_fds svc_fdset.fds_bits[0] /* compatibility */ 687 #else 688 extern int svc_fds; 689 #endif /* def FD_SETSIZE */ 690 #endif 691 692 /* 693 * a small program implemented by the svc_rpc implementation itself; 694 * also see clnt.h for protocol numbers. 695 */ 696 __BEGIN_DECLS 697 extern void rpctest_service(void); 698 __END_DECLS 699 700 __BEGIN_DECLS 701 extern SVCXPRT *svc_xprt_alloc(void); 702 extern void svc_xprt_free(SVCXPRT *); 703 #ifndef _KERNEL 704 extern void svc_getreq(int); 705 extern void svc_getreqset(fd_set *); 706 extern void svc_getreq_common(int); 707 struct pollfd; 708 extern void svc_getreq_poll(struct pollfd *, int); 709 extern void svc_run(void); 710 extern void svc_exit(void); 711 #else 712 extern void svc_run(SVCPOOL *); 713 extern void svc_exit(SVCPOOL *); 714 extern bool_t svc_getargs(struct svc_req *, xdrproc_t, void *); 715 extern bool_t svc_freeargs(struct svc_req *, xdrproc_t, void *); 716 extern void svc_freereq(struct svc_req *); 717 718 #endif 719 __END_DECLS 720 721 /* 722 * Socket to use on svcxxx_create call to get default socket 723 */ 724 #define RPC_ANYSOCK -1 725 #define RPC_ANYFD RPC_ANYSOCK 726 727 /* 728 * These are the existing service side transport implementations 729 */ 730 731 __BEGIN_DECLS 732 733 #ifdef _KERNEL 734 735 /* 736 * Create a new service pool. 737 */ 738 extern SVCPOOL* svcpool_create(const char *name, 739 struct sysctl_oid_list *sysctl_base); 740 741 /* 742 * Destroy a service pool, including all registered transports. 743 */ 744 extern void svcpool_destroy(SVCPOOL *pool); 745 746 /* 747 * Close a service pool. Similar to svcpool_destroy(), but it does not 748 * free the data structures. As such, the pool can be used again. 749 */ 750 extern void svcpool_close(SVCPOOL *pool); 751 752 /* 753 * Transport independent svc_create routine. 754 */ 755 extern int svc_create(SVCPOOL *, void (*)(struct svc_req *, SVCXPRT *), 756 const rpcprog_t, const rpcvers_t, const char *); 757 /* 758 * void (*dispatch)(); -- dispatch routine 759 * const rpcprog_t prognum; -- program number 760 * const rpcvers_t versnum; -- version number 761 * const char *nettype; -- network type 762 */ 763 764 765 /* 766 * Generic server creation routine. It takes a netconfig structure 767 * instead of a nettype. 768 */ 769 770 extern SVCXPRT *svc_tp_create(SVCPOOL *, void (*)(struct svc_req *, SVCXPRT *), 771 const rpcprog_t, const rpcvers_t, const char *uaddr, 772 const struct netconfig *); 773 /* 774 * void (*dispatch)(); -- dispatch routine 775 * const rpcprog_t prognum; -- program number 776 * const rpcvers_t versnum; -- version number 777 * const char *uaddr; -- universal address of service 778 * const struct netconfig *nconf; -- netconfig structure 779 */ 780 781 extern SVCXPRT *svc_dg_create(SVCPOOL *, struct socket *, 782 const size_t, const size_t); 783 /* 784 * struct socket *; -- open connection 785 * const size_t sendsize; -- max send size 786 * const size_t recvsize; -- max recv size 787 */ 788 789 extern SVCXPRT *svc_vc_create(SVCPOOL *, struct socket *, 790 const size_t, const size_t); 791 /* 792 * struct socket *; -- open connection 793 * const size_t sendsize; -- max send size 794 * const size_t recvsize; -- max recv size 795 */ 796 797 extern SVCXPRT *svc_vc_create_backchannel(SVCPOOL *); 798 799 extern void *clnt_bck_create(struct socket *, const rpcprog_t, const rpcvers_t); 800 /* 801 * struct socket *; -- server transport socket 802 * const rpcprog_t prog; -- RPC program number 803 * const rpcvers_t vers; -- RPC program version 804 */ 805 806 /* 807 * Generic TLI create routine 808 */ 809 extern SVCXPRT *svc_tli_create(SVCPOOL *, struct socket *, 810 const struct netconfig *, const struct t_bind *, const size_t, const size_t); 811 /* 812 * struct socket * so; -- connection end point 813 * const struct netconfig *nconf; -- netconfig structure for network 814 * const struct t_bind *bindaddr; -- local bind address 815 * const size_t sendsz; -- max sendsize 816 * const size_t recvsz; -- max recvsize 817 */ 818 819 #else /* !_KERNEL */ 820 821 /* 822 * Transport independent svc_create routine. 823 */ 824 extern int svc_create(void (*)(struct svc_req *, SVCXPRT *), 825 const rpcprog_t, const rpcvers_t, const char *); 826 /* 827 * void (*dispatch)(); -- dispatch routine 828 * const rpcprog_t prognum; -- program number 829 * const rpcvers_t versnum; -- version number 830 * const char *nettype; -- network type 831 */ 832 833 834 /* 835 * Generic server creation routine. It takes a netconfig structure 836 * instead of a nettype. 837 */ 838 839 extern SVCXPRT *svc_tp_create(void (*)(struct svc_req *, SVCXPRT *), 840 const rpcprog_t, const rpcvers_t, 841 const struct netconfig *); 842 /* 843 * void (*dispatch)(); -- dispatch routine 844 * const rpcprog_t prognum; -- program number 845 * const rpcvers_t versnum; -- version number 846 * const struct netconfig *nconf; -- netconfig structure 847 */ 848 849 /* 850 * Generic TLI create routine 851 */ 852 extern SVCXPRT *svc_tli_create(const int, const struct netconfig *, 853 const struct t_bind *, const u_int, 854 const u_int); 855 /* 856 * const int fd; -- connection end point 857 * const struct netconfig *nconf; -- netconfig structure for network 858 * const struct t_bind *bindaddr; -- local bind address 859 * const u_int sendsz; -- max sendsize 860 * const u_int recvsz; -- max recvsize 861 */ 862 863 /* 864 * Connectionless and connectionful create routines 865 */ 866 867 extern SVCXPRT *svc_vc_create(const int, const u_int, const u_int); 868 /* 869 * const int fd; -- open connection end point 870 * const u_int sendsize; -- max send size 871 * const u_int recvsize; -- max recv size 872 */ 873 874 /* 875 * Added for compatibility to old rpc 4.0. Obsoleted by svc_vc_create(). 876 */ 877 extern SVCXPRT *svcunix_create(int, u_int, u_int, char *); 878 879 extern SVCXPRT *svc_dg_create(const int, const u_int, const u_int); 880 /* 881 * const int fd; -- open connection 882 * const u_int sendsize; -- max send size 883 * const u_int recvsize; -- max recv size 884 */ 885 886 887 /* 888 * the routine takes any *open* connection 889 * descriptor as its first input and is used for open connections. 890 */ 891 extern SVCXPRT *svc_fd_create(const int, const u_int, const u_int); 892 /* 893 * const int fd; -- open connection end point 894 * const u_int sendsize; -- max send size 895 * const u_int recvsize; -- max recv size 896 */ 897 898 /* 899 * Added for compatibility to old rpc 4.0. Obsoleted by svc_fd_create(). 900 */ 901 extern SVCXPRT *svcunixfd_create(int, u_int, u_int); 902 903 /* 904 * Memory based rpc (for speed check and testing) 905 */ 906 extern SVCXPRT *svc_raw_create(void); 907 908 /* 909 * svc_dg_enable_cache() enables the cache on dg transports. 910 */ 911 int svc_dg_enablecache(SVCXPRT *, const u_int); 912 913 int __rpc_get_local_uid(SVCXPRT *_transp, uid_t *_uid); 914 915 #endif /* !_KERNEL */ 916 917 __END_DECLS 918 919 #ifndef _KERNEL 920 /* for backward compatibility */ 921 #include <rpc/svc_soc.h> 922 #endif 923 924 #endif /* !_RPC_SVC_H */ 925