1 /*- 2 * SPDX-License-Identifier: BSD-2-Clause-FreeBSD 3 * 4 * Copyright (c) 2019 Axiado Corporation 5 * All rights reserved. 6 * 7 * This software was developed in part by Kristof Provost under contract for 8 * Axiado Corporation. 9 * 10 * Redistribution and use in source and binary forms, with or without 11 * modification, are permitted provided that the following conditions 12 * are met: 13 * 1. Redistributions of source code must retain the above copyright 14 * notice, this list of conditions and the following disclaimer. 15 * 2. Redistributions in binary form must reproduce the above copyright 16 * notice, this list of conditions and the following disclaimer in the 17 * documentation and/or other materials provided with the distribution. 18 * 19 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND 20 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE 21 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE 22 * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE 23 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL 24 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS 25 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) 26 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT 27 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY 28 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF 29 * SUCH DAMAGE. 30 */ 31 32 #include <sys/cdefs.h> 33 __FBSDID("$FreeBSD$"); 34 35 #include <sys/param.h> 36 #include <sys/systm.h> 37 #include <sys/bus.h> 38 #include <sys/kernel.h> 39 #include <sys/lock.h> 40 #include <sys/module.h> 41 #include <sys/mutex.h> 42 #include <sys/rman.h> 43 44 #include <machine/bus.h> 45 #include <machine/cpu.h> 46 47 #include <dev/extres/clk/clk.h> 48 49 #include <dev/ofw/ofw_bus.h> 50 #include <dev/ofw/ofw_bus_subr.h> 51 #include <dev/ofw/openfirm.h> 52 53 #include <dev/uart/uart.h> 54 #include <dev/uart/uart_bus.h> 55 #include <dev/uart/uart_cpu.h> 56 #include <dev/uart/uart_cpu_fdt.h> 57 58 #include "uart_if.h" 59 60 #define SFUART_TXDATA 0x00 61 #define SFUART_TXDATA_FULL (1 << 31) 62 #define SFUART_RXDATA 0x04 63 #define SFUART_RXDATA_EMPTY (1 << 31) 64 #define SFUART_TXCTRL 0x08 65 #define SFUART_TXCTRL_ENABLE 0x01 66 #define SFUART_TXCTRL_NSTOP 0x02 67 #define SFUART_TXCTRL_TXCNT 0x70000 68 #define SFUART_TXCTRL_TXCNT_SHIFT 16 69 #define SFUART_RXCTRL 0x0c 70 #define SFUART_RXCTRL_ENABLE 0x01 71 #define SFUART_RXCTRL_RXCNT 0x70000 72 #define SFUART_RXCTRL_RXCNT_SHIFT 16 73 #define SFUART_IRQ_ENABLE 0x10 74 #define SFUART_IRQ_ENABLE_TXWM 0x01 75 #define SFUART_IRQ_ENABLE_RXWM 0x02 76 #define SFUART_IRQ_PENDING 0x14 77 #define SFUART_IRQ_PENDING_TXWM 0x01 78 #define SFUART_IRQ_PENDING_RXQM 0x02 79 #define SFUART_DIV 0x18 80 #define SFUART_REGS_SIZE 0x1c 81 82 #define SFUART_RX_FIFO_DEPTH 8 83 #define SFUART_TX_FIFO_DEPTH 8 84 85 struct sfuart_softc { 86 struct uart_softc uart_softc; 87 clk_t clk; 88 }; 89 90 static int 91 sfuart_probe(struct uart_bas *bas) 92 { 93 94 bas->regiowidth = 4; 95 96 return (0); 97 } 98 99 static void 100 sfuart_init(struct uart_bas *bas, int baudrate, int databits, int stopbits, 101 int parity) 102 { 103 uint32_t reg; 104 105 uart_setreg(bas, SFUART_IRQ_ENABLE, 0); 106 107 /* Enable RX and configure the watermark so that we get an interrupt 108 * when a single character arrives (if interrupts are enabled). */ 109 reg = SFUART_RXCTRL_ENABLE; 110 reg |= (0 << SFUART_RXCTRL_RXCNT_SHIFT); 111 uart_setreg(bas, SFUART_RXCTRL, reg); 112 113 /* Enable TX and configure the watermark so that we get an interrupt 114 * when there's room for one more character in the TX fifo (if 115 * interrupts are enabled). */ 116 reg = SFUART_TXCTRL_ENABLE; 117 reg |= (1 << SFUART_TXCTRL_TXCNT_SHIFT); 118 if (stopbits == 2) 119 reg |= SFUART_TXCTRL_NSTOP; 120 uart_setreg(bas, SFUART_TXCTRL, reg); 121 122 /* Don't touch DIV. Assume that's set correctly until we can 123 * reconfigure. */ 124 } 125 126 static void 127 sfuart_putc(struct uart_bas *bas, int c) 128 { 129 130 while ((uart_getreg(bas, SFUART_TXDATA) & SFUART_TXDATA_FULL) 131 != 0) 132 cpu_spinwait(); 133 134 uart_setreg(bas, SFUART_TXDATA, c); 135 } 136 137 static int 138 sfuart_rxready(struct uart_bas *bas) 139 { 140 141 return ((uart_getreg(bas, SFUART_RXDATA) & 142 SFUART_RXDATA_EMPTY) == 0); 143 } 144 145 static int 146 sfuart_getc(struct uart_bas *bas, struct mtx *hwmtx) 147 { 148 int c; 149 150 uart_lock(hwmtx); 151 152 while (((c = uart_getreg(bas, SFUART_RXDATA)) & 153 SFUART_RXDATA_EMPTY) != 0) { 154 uart_unlock(hwmtx); 155 DELAY(4); 156 uart_lock(hwmtx); 157 } 158 159 uart_unlock(hwmtx); 160 161 return (c & 0xff); 162 } 163 164 static int 165 sfuart_bus_probe(struct uart_softc *sc) 166 { 167 int error; 168 169 error = sfuart_probe(&sc->sc_bas); 170 if (error) 171 return (error); 172 173 sc->sc_rxfifosz = SFUART_RX_FIFO_DEPTH; 174 sc->sc_txfifosz = SFUART_TX_FIFO_DEPTH; 175 sc->sc_hwiflow = 0; 176 sc->sc_hwoflow = 0; 177 178 device_set_desc(sc->sc_dev, "SiFive UART"); 179 180 return (0); 181 } 182 183 static int 184 sfuart_bus_attach(struct uart_softc *sc) 185 { 186 struct uart_bas *bas; 187 struct sfuart_softc *sfsc; 188 uint64_t freq; 189 uint32_t reg; 190 int error; 191 192 sfsc = (struct sfuart_softc *)sc; 193 bas = &sc->sc_bas; 194 195 error = clk_get_by_ofw_index(sc->sc_dev, 0, 0, &sfsc->clk); 196 if (error) { 197 device_printf(sc->sc_dev, "couldn't allocate clock\n"); 198 return (ENXIO); 199 } 200 201 error = clk_enable(sfsc->clk); 202 if (error) { 203 device_printf(sc->sc_dev, "couldn't enable clock\n"); 204 return (ENXIO); 205 } 206 207 error = clk_get_freq(sfsc->clk, &freq); 208 if (error || freq == 0) { 209 clk_disable(sfsc->clk); 210 device_printf(sc->sc_dev, "couldn't get clock frequency\n"); 211 return (ENXIO); 212 } 213 214 bas->rclk = freq; 215 216 /* Enable RX/RX */ 217 reg = SFUART_RXCTRL_ENABLE; 218 reg |= (0 << SFUART_RXCTRL_RXCNT_SHIFT); 219 uart_setreg(bas, SFUART_RXCTRL, reg); 220 221 reg = SFUART_TXCTRL_ENABLE; 222 reg |= (1 << SFUART_TXCTRL_TXCNT_SHIFT); 223 uart_setreg(bas, SFUART_TXCTRL, reg); 224 225 /* Enable RX interrupt */ 226 uart_setreg(bas, SFUART_IRQ_ENABLE, SFUART_IRQ_ENABLE_RXWM); 227 228 return (0); 229 } 230 231 static int 232 sfuart_bus_detach(struct uart_softc *sc) 233 { 234 struct sfuart_softc *sfsc; 235 struct uart_bas *bas; 236 237 sfsc = (struct sfuart_softc *)sc; 238 bas = &sc->sc_bas; 239 240 /* Disable RX/TX */ 241 uart_setreg(bas, SFUART_RXCTRL, 0); 242 uart_setreg(bas, SFUART_TXCTRL, 0); 243 244 /* Disable interrupts */ 245 uart_setreg(bas, SFUART_IRQ_ENABLE, 0); 246 247 clk_disable(sfsc->clk); 248 249 return (0); 250 } 251 252 static int 253 sfuart_bus_flush(struct uart_softc *sc, int what) 254 { 255 struct uart_bas *bas; 256 uint32_t reg; 257 258 bas = &sc->sc_bas; 259 uart_lock(sc->sc_hwmtx); 260 261 if (what & UART_FLUSH_TRANSMITTER) { 262 do { 263 reg = uart_getreg(bas, SFUART_TXDATA); 264 } while ((reg & SFUART_TXDATA_FULL) != 0); 265 } 266 267 if (what & UART_FLUSH_RECEIVER) { 268 do { 269 reg = uart_getreg(bas, SFUART_RXDATA); 270 } while ((reg & SFUART_RXDATA_EMPTY) == 0); 271 } 272 uart_unlock(sc->sc_hwmtx); 273 274 return (0); 275 } 276 277 #define SIGCHG(c, i, s, d) \ 278 do { \ 279 if (c) \ 280 i |= ((i) & (s)) ? (s) : (s) | (d); \ 281 else \ 282 i = ((i) & (s)) ? ((i) & ~(s)) | (d) : (i); \ 283 } while (0) 284 285 static int 286 sfuart_bus_getsig(struct uart_softc *sc) 287 { 288 uint32_t new, old, sig; 289 290 do { 291 old = sc->sc_hwsig; 292 sig = old; 293 SIGCHG(1, sig, SER_DSR, SER_DDSR); 294 SIGCHG(1, sig, SER_DCD, SER_DDCD); 295 SIGCHG(1, sig, SER_CTS, SER_DCTS); 296 new = sig & ~SER_MASK_DELTA; 297 } while (!atomic_cmpset_32(&sc->sc_hwsig, old, new)); 298 299 return (sig); 300 } 301 302 static int 303 sfuart_bus_setsig(struct uart_softc *sc, int sig) 304 { 305 uint32_t new, old; 306 307 do { 308 old = sc->sc_hwsig; 309 new = old; 310 if (sig & SER_DDTR) { 311 SIGCHG(sig & SER_DTR, new, SER_DTR, SER_DDTR); 312 } 313 if (sig & SER_DRTS) { 314 SIGCHG(sig & SER_RTS, new, SER_RTS, SER_DRTS); 315 } 316 } while (!atomic_cmpset_32(&sc->sc_hwsig, old, new)); 317 318 return (0); 319 } 320 321 static int 322 sfuart_bus_ioctl(struct uart_softc *sc, int request, intptr_t data) 323 { 324 struct uart_bas *bas; 325 uint32_t reg; 326 int error; 327 328 bas = &sc->sc_bas; 329 330 uart_lock(sc->sc_hwmtx); 331 332 switch (request) { 333 case UART_IOCTL_BAUD: 334 reg = uart_getreg(bas, SFUART_DIV); 335 if (reg == 0) { 336 /* Possible if the divisor hasn't been set up yet. */ 337 error = ENXIO; 338 break; 339 } 340 *(int*)data = bas->rclk / (reg + 1); 341 error = 0; 342 break; 343 default: 344 error = EINVAL; 345 break; 346 } 347 348 uart_unlock(sc->sc_hwmtx); 349 350 return (error); 351 } 352 353 static int 354 sfuart_bus_ipend(struct uart_softc *sc) 355 { 356 struct uart_bas *bas; 357 int ipend; 358 uint32_t reg, ie; 359 360 bas = &sc->sc_bas; 361 uart_lock(sc->sc_hwmtx); 362 363 ipend = 0; 364 reg = uart_getreg(bas, SFUART_IRQ_PENDING); 365 ie = uart_getreg(bas, SFUART_IRQ_ENABLE); 366 367 if ((reg & SFUART_IRQ_PENDING_TXWM) != 0 && 368 (ie & SFUART_IRQ_ENABLE_TXWM) != 0) { 369 ipend |= SER_INT_TXIDLE; 370 371 /* Disable TX interrupt */ 372 ie &= ~(SFUART_IRQ_ENABLE_TXWM); 373 uart_setreg(bas, SFUART_IRQ_ENABLE, ie); 374 } 375 376 if ((reg & SFUART_IRQ_PENDING_RXQM) != 0) 377 ipend |= SER_INT_RXREADY; 378 379 uart_unlock(sc->sc_hwmtx); 380 381 return (ipend); 382 } 383 384 static int 385 sfuart_bus_param(struct uart_softc *sc, int baudrate, int databits, 386 int stopbits, int parity) 387 { 388 struct uart_bas *bas; 389 uint32_t reg; 390 391 bas = &sc->sc_bas; 392 393 if (databits != 8) 394 return (EINVAL); 395 396 if (parity != UART_PARITY_NONE) 397 return (EINVAL); 398 399 uart_lock(sc->sc_hwmtx); 400 401 reg = uart_getreg(bas, SFUART_TXCTRL); 402 if (stopbits == 2) { 403 reg |= SFUART_TXCTRL_NSTOP; 404 } else if (stopbits == 1) { 405 reg &= ~SFUART_TXCTRL_NSTOP; 406 } else { 407 uart_unlock(sc->sc_hwmtx); 408 return (EINVAL); 409 } 410 411 if (baudrate > 0 && bas->rclk != 0) { 412 reg = (bas->rclk / baudrate) - 1; 413 uart_setreg(bas, SFUART_DIV, reg); 414 } 415 416 uart_unlock(sc->sc_hwmtx); 417 return (0); 418 } 419 420 static int 421 sfuart_bus_receive(struct uart_softc *sc) 422 { 423 struct uart_bas *bas; 424 uint32_t reg; 425 426 bas = &sc->sc_bas; 427 uart_lock(sc->sc_hwmtx); 428 429 reg = uart_getreg(bas, SFUART_RXDATA); 430 while ((reg & SFUART_RXDATA_EMPTY) == 0) { 431 if (uart_rx_full(sc)) { 432 sc->sc_rxbuf[sc->sc_rxput] = UART_STAT_OVERRUN; 433 break; 434 } 435 436 uart_rx_put(sc, reg & 0xff); 437 438 reg = uart_getreg(bas, SFUART_RXDATA); 439 } 440 441 uart_unlock(sc->sc_hwmtx); 442 443 return (0); 444 } 445 446 static int 447 sfuart_bus_transmit(struct uart_softc *sc) 448 { 449 struct uart_bas *bas; 450 int i; 451 uint32_t reg; 452 453 bas = &sc->sc_bas; 454 uart_lock(sc->sc_hwmtx); 455 456 reg = uart_getreg(bas, SFUART_IRQ_ENABLE); 457 reg |= SFUART_IRQ_ENABLE_TXWM; 458 uart_setreg(bas, SFUART_IRQ_ENABLE, reg); 459 460 for (i = 0; i < sc->sc_txdatasz; i++) 461 sfuart_putc(bas, sc->sc_txbuf[i]); 462 463 sc->sc_txbusy = 1; 464 465 uart_unlock(sc->sc_hwmtx); 466 467 return (0); 468 } 469 470 static void 471 sfuart_bus_grab(struct uart_softc *sc) 472 { 473 struct uart_bas *bas; 474 uint32_t reg; 475 476 bas = &sc->sc_bas; 477 uart_lock(sc->sc_hwmtx); 478 479 reg = uart_getreg(bas, SFUART_IRQ_ENABLE); 480 reg &= ~(SFUART_IRQ_ENABLE_TXWM | SFUART_IRQ_PENDING_RXQM); 481 uart_setreg(bas, SFUART_IRQ_ENABLE, reg); 482 483 uart_unlock(sc->sc_hwmtx); 484 } 485 486 static void 487 sfuart_bus_ungrab(struct uart_softc *sc) 488 { 489 struct uart_bas *bas; 490 uint32_t reg; 491 492 bas = &sc->sc_bas; 493 uart_lock(sc->sc_hwmtx); 494 495 reg = uart_getreg(bas, SFUART_IRQ_ENABLE); 496 reg |= SFUART_IRQ_ENABLE_TXWM | SFUART_IRQ_PENDING_RXQM; 497 uart_setreg(bas, SFUART_IRQ_ENABLE, reg); 498 499 uart_unlock(sc->sc_hwmtx); 500 } 501 502 static kobj_method_t sfuart_methods[] = { 503 KOBJMETHOD(uart_probe, sfuart_bus_probe), 504 KOBJMETHOD(uart_attach, sfuart_bus_attach), 505 KOBJMETHOD(uart_detach, sfuart_bus_detach), 506 KOBJMETHOD(uart_flush, sfuart_bus_flush), 507 KOBJMETHOD(uart_getsig, sfuart_bus_getsig), 508 KOBJMETHOD(uart_setsig, sfuart_bus_setsig), 509 KOBJMETHOD(uart_ioctl, sfuart_bus_ioctl), 510 KOBJMETHOD(uart_ipend, sfuart_bus_ipend), 511 KOBJMETHOD(uart_param, sfuart_bus_param), 512 KOBJMETHOD(uart_receive, sfuart_bus_receive), 513 KOBJMETHOD(uart_transmit, sfuart_bus_transmit), 514 KOBJMETHOD(uart_grab, sfuart_bus_grab), 515 KOBJMETHOD(uart_ungrab, sfuart_bus_ungrab), 516 KOBJMETHOD_END 517 }; 518 519 static struct uart_ops sfuart_ops = { 520 .probe = sfuart_probe, 521 .init = sfuart_init, 522 .term = NULL, 523 .putc = sfuart_putc, 524 .rxready = sfuart_rxready, 525 .getc = sfuart_getc, 526 }; 527 528 struct uart_class sfuart_class = { 529 "sifiveuart", 530 sfuart_methods, 531 sizeof(struct sfuart_softc), 532 .uc_ops = &sfuart_ops, 533 .uc_range = SFUART_REGS_SIZE, 534 .uc_rclk = 0, 535 .uc_rshift = 0 536 }; 537 538 static struct ofw_compat_data compat_data[] = { 539 { "sifive,uart0", (uintptr_t)&sfuart_class }, 540 { NULL, (uintptr_t)NULL } 541 }; 542 543 UART_FDT_CLASS_AND_DEVICE(compat_data); 544