xref: /freebsd/sys/riscv/conf/GENERIC (revision a573243370d3f4ffad81c740591004851f2beb45)
1#
2# GENERIC -- Generic kernel configuration file for FreeBSD/RISC-V
3#
4# For more information on this file, please read the config(5) manual page,
5# and/or the handbook section on Kernel Configuration Files:
6#
7#    https://docs.freebsd.org/en/books/handbook/kernelconfig/#kernelconfig-config
8#
9# The handbook is also available locally in /usr/share/doc/handbook
10# if you've installed the doc distribution, otherwise always see the
11# FreeBSD World Wide Web server (https://www.FreeBSD.org/) for the
12# latest information.
13#
14# An exhaustive list of options and more detailed explanations of the
15# device lines is also present in the ../../conf/NOTES and NOTES files.
16# If you are in doubt as to the purpose or necessity of a line, check first
17# in NOTES.
18#
19# $FreeBSD$
20
21cpu		RISCV
22ident		GENERIC
23
24makeoptions	DEBUG=-g		# Build kernel with gdb(1) debug symbols
25makeoptions	WITH_CTF=1		# Run ctfconvert(1) for DTrace support
26
27options 	SCHED_ULE		# ULE scheduler
28options 	PREEMPTION		# Enable kernel thread preemption
29options 	VIMAGE			# Subsystem virtualization, e.g. VNET
30options 	INET			# InterNETworking
31options 	INET6			# IPv6 communications protocols
32options 	TCP_HHOOK		# hhook(9) framework for TCP
33options 	IPSEC_SUPPORT		# Allow kldload of ipsec and tcpmd5
34options		ROUTE_MPATH		# Multipath routing support
35options 	TCP_OFFLOAD		# TCP offload
36options 	SCTP_SUPPORT		# Allow kldload of SCTP
37options 	FFS			# Berkeley Fast Filesystem
38options 	SOFTUPDATES		# Enable FFS soft updates support
39options 	UFS_ACL			# Support for access control lists
40options 	UFS_DIRHASH		# Improve performance on big directories
41options 	UFS_GJOURNAL		# Enable gjournal-based UFS journaling
42options 	QUOTA			# Enable disk quotas for UFS
43options 	NFSCL			# Network Filesystem Client
44options 	NFSD			# Network Filesystem Server
45options 	NFSLOCKD		# Network Lock Manager
46options 	NFS_ROOT		# NFS usable as /, requires NFSCL
47options 	MSDOSFS			# MSDOS Filesystem
48options 	CD9660			# ISO 9660 Filesystem
49options 	PROCFS			# Process filesystem (requires PSEUDOFS)
50options 	PSEUDOFS		# Pseudo-filesystem framework
51options 	TMPFS			# Efficient memory filesystem
52options 	GEOM_PART_GPT		# GUID Partition Tables.
53options 	GEOM_RAID		# Soft RAID functionality.
54options 	GEOM_LABEL		# Provides labelization
55options 	SCSI_DELAY=5000		# Delay (in ms) before probing SCSI
56options 	KTRACE			# ktrace(1) support
57options 	STACK			# stack(9) support
58options 	SYSVSHM			# SYSV-style shared memory
59options 	SYSVMSG			# SYSV-style message queues
60options 	SYSVSEM			# SYSV-style semaphores
61options 	_KPOSIX_PRIORITY_SCHEDULING # POSIX P1003_1B real-time extensions
62options 	PRINTF_BUFR_SIZE=128	# Prevent printf output being interspersed.
63options 	KBD_INSTALL_CDEV	# install a CDEV entry in /dev
64# options 	HWPMC_HOOKS		# Necessary kernel hooks for hwpmc(4)
65options 	AUDIT			# Security event auditing
66options 	CAPABILITY_MODE		# Capsicum capability mode
67options 	CAPABILITIES		# Capsicum capabilities
68options 	MAC			# TrustedBSD MAC Framework
69options 	KDTRACE_FRAME		# Ensure frames are compiled in
70options 	KDTRACE_HOOKS		# Kernel DTrace hooks
71options 	DDB_CTF			# Kernel ELF linker loads CTF data
72options 	FPE			# Floating-point extension support
73options 	RACCT			# Resource accounting framework
74options 	RACCT_DEFAULT_TO_DISABLED # Set kern.racct.enable=0 by default
75options 	RCTL			# Resource limits
76options 	SMP
77options 	INTRNG
78
79# RISC-V SBI console
80device		rcons
81
82# EXT_RESOURCES pseudo devices
83options 	EXT_RESOURCES
84device		clk
85device		syscon
86device		syscon_power
87device		riscv_syscon
88
89# Bus drivers
90device		pci
91
92# VirtIO support
93device		virtio			# Generic VirtIO bus (required)
94device		virtio_pci		# VirtIO PCI device
95device		vtnet			# VirtIO Ethernet device
96device		virtio_blk		# VirtIO Block device
97device		virtio_mmio		# VirtIO MMIO bus
98
99# DTrace support
100# device	dtrace
101# device	dtrace_profile
102# device	dtrace_sdt
103# device	dtrace_fbt
104# device	dtrace_systrace
105# device	dtrace_prototype
106# device	dtraceall
107
108# Serial (COM) ports
109device		uart		# Generic UART driver
110device		uart_lowrisc	# lowRISC UART driver
111device		uart_ns8250	# ns8250-type UART driver
112
113# RTC
114device		goldfish_rtc	# QEMU RTC
115
116# Ethernet drivers
117device		cgem		# Cadence GEM Gigabit Ethernet device
118device		miibus		# MII bus support
119device		xae		# Xilinx AXI Ethernet MAC
120
121# DMA support
122device		xdma		# DMA interface
123device		axidma		# Xilinx AXI DMA Controller
124
125# SPI
126device		spibus
127device		spigen
128
129# Uncomment for memory disk
130# options 	MD_ROOT
131# options 	MD_ROOT_SIZE=32768	# 32MB ram disk
132# makeoptions	MFS_IMAGE=/path/to/img
133# options 	ROOTDEVNAME=\"ufs:/dev/md0\"
134
135# Uncomment for virtio block device
136# options 	ROOTDEVNAME=\"ufs:/dev/vtbd0\"
137
138# Debugging support.  Always need this:
139options 	KDB			# Enable kernel debugger support.
140options 	KDB_TRACE		# Print a stack trace for a panic.
141# For full debugger support use (turn off in stable branch):
142options 	DDB			# Support DDB.
143# options 	GDB			# Support remote GDB.
144options 	DEADLKRES		# Enable the deadlock resolver
145options 	INVARIANTS		# Enable calls of extra sanity checking
146options 	INVARIANT_SUPPORT	# Extra sanity checks of internal structures, required by INVARIANTS
147options 	WITNESS			# Enable checks to detect deadlocks and cycles
148options 	WITNESS_SKIPSPIN	# Don't run witness on spinlocks for speed
149options 	MALLOC_DEBUG_MAXZONES=8	# Separate malloc(9) zones
150# options 	EARLY_PRINTF
151options 	VERBOSE_SYSINIT=0	# Support debug.verbose_sysinit, off by default
152
153# Kernel dump features.
154options		ZSTDIO			# zstd-compressed kernel and user dumps
155
156# Pseudo devices.
157device		crypto		# core crypto support
158device		loop		# Network loopback
159device		ether		# Ethernet support
160device		vlan		# 802.1Q VLAN support
161device		tuntap		# Packet tunnel.
162device		md		# Memory "disks"
163device		gif		# IPv6 and IPv4 tunneling
164device		firmware	# firmware assist module
165
166# The `bpf' device enables the Berkeley Packet Filter.
167# Be aware of the administrative consequences of enabling this!
168# Note that 'bpf' is required for DHCP.
169device		bpf		# Berkeley packet filter
170
171# Flattened Device Tree
172options 	FDT
173makeoptions	MODULES_EXTRA+="dtb/sifive"
174
175# SiFive device drivers
176device		fu540spi
177include		"../sifive/std.sifive"
178