1 /*- 2 * Copyright 2002 by Peter Grehan. All rights reserved. 3 * 4 * Redistribution and use in source and binary forms, with or without 5 * modification, are permitted provided that the following conditions 6 * are met: 7 * 1. Redistributions of source code must retain the above copyright 8 * notice, this list of conditions and the following disclaimer. 9 * 2. Redistributions in binary form must reproduce the above copyright 10 * notice, this list of conditions and the following disclaimer in the 11 * documentation and/or other materials provided with the distribution. 12 * 3. The name of the author may not be used to endorse or promote products 13 * derived from this software without specific prior written permission. 14 * 15 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR 16 * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES 17 * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. 18 * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, 19 * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, 20 * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; 21 * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED 22 * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, 23 * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY 24 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF 25 * SUCH DAMAGE. 26 * 27 * $FreeBSD$ 28 */ 29 30 /* 31 * PSIM local bus ATA controller 32 */ 33 #include "opt_ata.h" 34 #include <sys/param.h> 35 #include <sys/systm.h> 36 #include <sys/kernel.h> 37 #include <sys/module.h> 38 #include <sys/bus.h> 39 #include <sys/malloc.h> 40 #include <sys/sema.h> 41 #include <sys/taskqueue.h> 42 #include <machine/stdarg.h> 43 #include <vm/uma.h> 44 #include <machine/resource.h> 45 #include <machine/bus.h> 46 #include <sys/rman.h> 47 #include <sys/ata.h> 48 #include <dev/ata/ata-all.h> 49 #include <ata_if.h> 50 51 #include <dev/ofw/openfirm.h> 52 #include <powerpc/psim/iobusvar.h> 53 54 /* 55 * Define the iobus ata bus attachment. This creates a pseudo-bus that 56 * the ATA device can be attached to 57 */ 58 static int ata_iobus_attach(device_t dev); 59 static int ata_iobus_probe(device_t dev); 60 static int ata_iobus_print_child(device_t dev, device_t child); 61 struct resource *ata_iobus_alloc_resource(device_t, device_t, int, int *, 62 u_long, u_long, u_long, u_int); 63 static int ata_iobus_release_resource(device_t, device_t, int, int, 64 struct resource *); 65 66 static device_method_t ata_iobus_methods[] = { 67 /* Device interface */ 68 DEVMETHOD(device_probe, ata_iobus_probe), 69 DEVMETHOD(device_attach, ata_iobus_attach), 70 DEVMETHOD(device_shutdown, bus_generic_shutdown), 71 DEVMETHOD(device_suspend, bus_generic_suspend), 72 DEVMETHOD(device_resume, bus_generic_resume), 73 74 /* Bus methods */ 75 DEVMETHOD(bus_print_child, ata_iobus_print_child), 76 DEVMETHOD(bus_alloc_resource, ata_iobus_alloc_resource), 77 DEVMETHOD(bus_release_resource, ata_iobus_release_resource), 78 DEVMETHOD(bus_activate_resource, bus_generic_activate_resource), 79 DEVMETHOD(bus_deactivate_resource, bus_generic_deactivate_resource), 80 DEVMETHOD(bus_setup_intr, bus_generic_setup_intr), 81 DEVMETHOD(bus_teardown_intr, bus_generic_teardown_intr), 82 83 { 0, 0 } 84 }; 85 86 static driver_t ata_iobus_driver = { 87 "ataiobus", 88 ata_iobus_methods, 89 0, 90 }; 91 92 static devclass_t ata_iobus_devclass; 93 94 DRIVER_MODULE(ataiobus, iobus, ata_iobus_driver, ata_iobus_devclass, 0, 0); 95 MODULE_DEPEND(ata, ata, 1, 1, 1); 96 97 static int 98 ata_iobus_probe(device_t dev) 99 { 100 char *type = iobus_get_name(dev); 101 102 if (strncmp(type, "ata", 3) != 0) 103 return (ENXIO); 104 105 device_set_desc(dev, "PSIM ATA Controller"); 106 return (0); 107 } 108 109 110 static int 111 ata_iobus_attach(device_t dev) 112 { 113 /* 114 * Add a single child per controller. Should be able 115 * to add two 116 */ 117 device_add_child(dev, "ata", 118 devclass_find_free_unit(ata_devclass, 0)); 119 120 return (bus_generic_attach(dev)); 121 } 122 123 124 static int 125 ata_iobus_print_child(device_t dev, device_t child) 126 { 127 int retval = 0; 128 129 retval += bus_print_child_header(dev, child); 130 /* irq ? */ 131 retval += bus_print_child_footer(dev, child); 132 133 return (retval); 134 } 135 136 137 struct resource * 138 ata_iobus_alloc_resource(device_t dev, device_t child, int type, int *rid, 139 u_long start, u_long end, u_long count, u_int flags) 140 { 141 struct resource *res = NULL; 142 int myrid; 143 u_int *ofw_regs; 144 145 ofw_regs = iobus_get_regs(dev); 146 147 /* 148 * The reg array for the PSIM ata device has 6 start/size entries: 149 * 0 - unused 150 * 1/2/3 - unused 151 * 4/5/6 - primary command 152 * 7/8/9 - secondary command 153 * 10/11/12 - primary control 154 * 13/14/15 - secondary control 155 * 16/17/18 - primary/secondary dma registers, unimplemented 156 * 157 * The resource values are calculated from these registers 158 */ 159 if (type == SYS_RES_IOPORT) { 160 switch (*rid) { 161 case ATA_IOADDR_RID: 162 myrid = 0; 163 start = ofw_regs[4]; 164 end = start + ATA_IOSIZE - 1; 165 count = ATA_IOSIZE; 166 res = BUS_ALLOC_RESOURCE(device_get_parent(dev), child, 167 SYS_RES_MEMORY, &myrid, 168 start, end, count, flags); 169 break; 170 171 case ATA_CTLADDR_RID: 172 myrid = 0; 173 start = ofw_regs[10]; 174 end = start + ATA_CTLIOSIZE - 1; 175 count = ATA_CTLIOSIZE; 176 res = BUS_ALLOC_RESOURCE(device_get_parent(dev), child, 177 SYS_RES_MEMORY, &myrid, 178 start, end, count, flags); 179 break; 180 181 case ATA_BMADDR_RID: 182 /* DMA not properly supported by psim */ 183 break; 184 } 185 return (res); 186 187 } else if (type == SYS_RES_IRQ && *rid == ATA_IRQ_RID) { 188 /* 189 * Pass this on to the parent 190 */ 191 return (BUS_ALLOC_RESOURCE(device_get_parent(dev), dev, 192 SYS_RES_IRQ, rid, 0, ~0, 1, flags)); 193 194 } else { 195 return (NULL); 196 } 197 } 198 199 200 static int 201 ata_iobus_release_resource(device_t dev, device_t child, int type, int rid, 202 struct resource *r) 203 { 204 /* no hotplug... */ 205 return (0); 206 } 207 208 209 /* 210 * Define the actual ATA device. This is a sub-bus to the ata-iobus layer 211 * to allow the higher layer bus to massage the resource allocation. 212 */ 213 214 static int ata_iobus_sub_probe(device_t dev); 215 static void ata_iobus_sub_setmode(device_t parent, device_t dev); 216 217 static device_method_t ata_iobus_sub_methods[] = { 218 /* Device interface */ 219 DEVMETHOD(device_probe, ata_iobus_sub_probe), 220 DEVMETHOD(device_attach, ata_attach), 221 DEVMETHOD(device_detach, ata_detach), 222 DEVMETHOD(device_resume, ata_resume), 223 224 /* ATA interface */ 225 DEVMETHOD(ata_setmode, ata_iobus_sub_setmode), 226 { 0, 0 } 227 }; 228 229 static driver_t ata_iobus_sub_driver = { 230 "ata", 231 ata_iobus_sub_methods, 232 sizeof(struct ata_channel), 233 }; 234 235 DRIVER_MODULE(ata, ataiobus, ata_iobus_sub_driver, ata_devclass, 0, 0); 236 237 static int 238 ata_iobus_sub_probe(device_t dev) 239 { 240 struct ata_channel *ch = device_get_softc(dev); 241 242 /* Only a single unit per controller thus far */ 243 ch->unit = 0; 244 ch->flags = (ATA_USE_16BIT|ATA_NO_SLAVE); 245 ata_generic_hw(dev); 246 247 return ata_probe(dev); 248 } 249 250 static void 251 ata_iobus_sub_setmode(device_t parent, device_t dev) 252 { 253 struct ata_device *atadev = device_get_softc(dev); 254 255 /* Only ever PIO mode here... */ 256 atadev->mode = ATA_PIO; 257 } 258