xref: /freebsd/sys/powerpc/powermac/pmu.c (revision 7661de35d15f582ab33e3bd6b8d909601557e436)
1 /*-
2  * Copyright (c) 2006 Michael Lorenz
3  * Copyright 2008 by Nathan Whitehorn
4  * All rights reserved.
5  *
6  * Redistribution and use in source and binary forms, with or without
7  * modification, are permitted provided that the following conditions
8  * are met:
9  * 1. Redistributions of source code must retain the above copyright
10  *    notice, this list of conditions and the following disclaimer.
11  * 2. Redistributions in binary form must reproduce the above copyright
12  *    notice, this list of conditions and the following disclaimer in the
13  *    documentation and/or other materials provided with the distribution.
14  *
15  * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
16  * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
17  * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
18  * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
19  * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
20  * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
21  * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
22  * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
23  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
24  * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
25  * SUCH DAMAGE.
26  *
27  */
28 
29 #include <sys/cdefs.h>
30 __FBSDID("$FreeBSD$");
31 
32 #include <sys/param.h>
33 #include <sys/systm.h>
34 #include <sys/module.h>
35 #include <sys/bus.h>
36 #include <sys/conf.h>
37 #include <sys/kernel.h>
38 #include <sys/clock.h>
39 #include <sys/proc.h>
40 #include <sys/reboot.h>
41 #include <sys/sysctl.h>
42 
43 #include <dev/ofw/ofw_bus.h>
44 #include <dev/ofw/openfirm.h>
45 #include <dev/led/led.h>
46 
47 #include <machine/_inttypes.h>
48 #include <machine/bus.h>
49 #include <machine/cpu.h>
50 #include <machine/hid.h>
51 #include <machine/intr_machdep.h>
52 #include <machine/md_var.h>
53 #include <machine/pcb.h>
54 #include <machine/pio.h>
55 #include <machine/resource.h>
56 
57 #include <vm/vm.h>
58 #include <vm/pmap.h>
59 
60 #include <sys/rman.h>
61 
62 #include <dev/adb/adb.h>
63 
64 #include "clock_if.h"
65 #include "pmuvar.h"
66 #include "viareg.h"
67 #include "uninorthvar.h"	/* For unin_chip_sleep()/unin_chip_wake() */
68 
69 #define PMU_DEFAULTS	PMU_INT_TICK | PMU_INT_ADB | \
70 	PMU_INT_PCEJECT | PMU_INT_SNDBRT | \
71 	PMU_INT_BATTERY | PMU_INT_ENVIRONMENT
72 
73 /*
74  * Bus interface
75  */
76 static int	pmu_probe(device_t);
77 static int	pmu_attach(device_t);
78 static int	pmu_detach(device_t);
79 
80 /*
81  * Clock interface
82  */
83 static int	pmu_gettime(device_t dev, struct timespec *ts);
84 static int	pmu_settime(device_t dev, struct timespec *ts);
85 
86 /*
87  * ADB Interface
88  */
89 
90 static u_int	pmu_adb_send(device_t dev, u_char command_byte, int len,
91 		    u_char *data, u_char poll);
92 static u_int	pmu_adb_autopoll(device_t dev, uint16_t mask);
93 static u_int	pmu_poll(device_t dev);
94 
95 /*
96  * Power interface
97  */
98 
99 static void	pmu_shutdown(void *xsc, int howto);
100 static void	pmu_set_sleepled(void *xsc, int onoff);
101 static int	pmu_server_mode(SYSCTL_HANDLER_ARGS);
102 static int	pmu_acline_state(SYSCTL_HANDLER_ARGS);
103 static int	pmu_query_battery(struct pmu_softc *sc, int batt,
104 		    struct pmu_battstate *info);
105 static int	pmu_battquery_sysctl(SYSCTL_HANDLER_ARGS);
106 
107 /*
108  * List of battery-related sysctls we might ask for
109  */
110 
111 enum {
112 	PMU_BATSYSCTL_PRESENT	= 1 << 8,
113 	PMU_BATSYSCTL_CHARGING	= 2 << 8,
114 	PMU_BATSYSCTL_CHARGE	= 3 << 8,
115 	PMU_BATSYSCTL_MAXCHARGE = 4 << 8,
116 	PMU_BATSYSCTL_CURRENT	= 5 << 8,
117 	PMU_BATSYSCTL_VOLTAGE	= 6 << 8,
118 	PMU_BATSYSCTL_TIME	= 7 << 8,
119 	PMU_BATSYSCTL_LIFE	= 8 << 8
120 };
121 
122 static device_method_t  pmu_methods[] = {
123 	/* Device interface */
124 	DEVMETHOD(device_probe,		pmu_probe),
125 	DEVMETHOD(device_attach,	pmu_attach),
126         DEVMETHOD(device_detach,        pmu_detach),
127         DEVMETHOD(device_shutdown,      bus_generic_shutdown),
128 
129 	/* ADB bus interface */
130 	DEVMETHOD(adb_hb_send_raw_packet,   pmu_adb_send),
131 	DEVMETHOD(adb_hb_controller_poll,   pmu_poll),
132 	DEVMETHOD(adb_hb_set_autopoll_mask, pmu_adb_autopoll),
133 
134 	/* Clock interface */
135 	DEVMETHOD(clock_gettime,	pmu_gettime),
136 	DEVMETHOD(clock_settime,	pmu_settime),
137 
138 	DEVMETHOD_END
139 };
140 
141 static driver_t pmu_driver = {
142 	"pmu",
143 	pmu_methods,
144 	sizeof(struct pmu_softc),
145 };
146 
147 static devclass_t pmu_devclass;
148 
149 DRIVER_MODULE(pmu, macio, pmu_driver, pmu_devclass, 0, 0);
150 DRIVER_MODULE(adb, pmu, adb_driver, adb_devclass, 0, 0);
151 
152 static int	pmuextint_probe(device_t);
153 static int	pmuextint_attach(device_t);
154 
155 static device_method_t  pmuextint_methods[] = {
156 	/* Device interface */
157 	DEVMETHOD(device_probe,		pmuextint_probe),
158 	DEVMETHOD(device_attach,	pmuextint_attach),
159 
160 	{0,0}
161 };
162 
163 static driver_t pmuextint_driver = {
164 	"pmuextint",
165 	pmuextint_methods,
166 	0
167 };
168 
169 static devclass_t pmuextint_devclass;
170 
171 DRIVER_MODULE(pmuextint, macgpio, pmuextint_driver, pmuextint_devclass, 0, 0);
172 
173 /* Make sure uhid is loaded, as it turns off some of the ADB emulation */
174 MODULE_DEPEND(pmu, usb, 1, 1, 1);
175 
176 static void pmu_intr(void *arg);
177 static void pmu_in(struct pmu_softc *sc);
178 static void pmu_out(struct pmu_softc *sc);
179 static void pmu_ack_on(struct pmu_softc *sc);
180 static void pmu_ack_off(struct pmu_softc *sc);
181 static int pmu_send(void *cookie, int cmd, int length, uint8_t *in_msg,
182 	int rlen, uint8_t *out_msg);
183 static uint8_t pmu_read_reg(struct pmu_softc *sc, u_int offset);
184 static void pmu_write_reg(struct pmu_softc *sc, u_int offset, uint8_t value);
185 static int pmu_intr_state(struct pmu_softc *);
186 
187 /* these values shows that number of data returned after 'send' cmd is sent */
188 static signed char pm_send_cmd_type[] = {
189 	  -1,   -1,   -1,   -1,   -1,   -1,   -1,   -1,
190 	  -1,   -1,   -1,   -1,   -1,   -1,   -1,   -1,
191 	0x01, 0x01,   -1,   -1,   -1,   -1,   -1,   -1,
192 	0x00, 0x00,   -1,   -1,   -1,   -1,   -1, 0x00,
193 	  -1, 0x00, 0x02, 0x01, 0x01,   -1,   -1,   -1,
194 	0x00,   -1,   -1,   -1,   -1,   -1,   -1,   -1,
195 	0x04, 0x14,   -1, 0x03,   -1,   -1,   -1,   -1,
196 	0x00, 0x00, 0x02, 0x02,   -1,   -1,   -1,   -1,
197 	0x01, 0x01,   -1,   -1,   -1,   -1,   -1,   -1,
198 	0x00, 0x00,   -1,   -1, 0x01,   -1,   -1,   -1,
199 	0x01, 0x00, 0x02, 0x02,   -1, 0x01, 0x03, 0x01,
200 	0x00, 0x01, 0x00, 0x00, 0x00,   -1,   -1,   -1,
201 	0x02,   -1,   -1,   -1,   -1,   -1,   -1,   -1,
202 	0x00, 0x00, 0x00, 0x00, 0x00, 0x00,   -1,   -1,
203 	0x01, 0x01, 0x01,   -1,   -1,   -1,   -1,   -1,
204 	0x00, 0x00,   -1,   -1,   -1, 0x05, 0x04, 0x04,
205 	0x04,   -1, 0x00,   -1,   -1,   -1,   -1,   -1,
206 	0x00,   -1,   -1,   -1,   -1,   -1,   -1,   -1,
207 	0x01, 0x02,   -1,   -1,   -1,   -1,   -1,   -1,
208 	0x00, 0x00,   -1,   -1,   -1,   -1,   -1,   -1,
209 	0x02, 0x02, 0x02, 0x04,   -1, 0x00,   -1,   -1,
210 	0x01, 0x01, 0x03, 0x02,   -1,   -1,   -1,   -1,
211 	  -1,   -1,   -1,   -1,   -1,   -1,   -1,   -1,
212 	  -1,   -1,   -1,   -1,   -1,   -1,   -1,   -1,
213 	  -1,   -1,   -1,   -1,   -1,   -1,   -1,   -1,
214 	  -1,   -1,   -1,   -1,   -1,   -1,   -1,   -1,
215 	0x00,   -1,   -1,   -1,   -1,   -1,   -1,   -1,
216 	0x01, 0x01,   -1,   -1, 0x00, 0x00,   -1,   -1,
217 	  -1, 0x04, 0x00,   -1,   -1,   -1,   -1,   -1,
218 	0x03,   -1, 0x00,   -1, 0x00,   -1,   -1, 0x00,
219 	  -1,   -1,   -1,   -1,   -1,   -1,   -1,   -1,
220 	  -1,   -1,   -1,   -1,   -1,   -1,   -1,   -1
221 };
222 
223 /* these values shows that number of data returned after 'receive' cmd is sent */
224 static signed char pm_receive_cmd_type[] = {
225 	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
226 	  -1,   -1,   -1,   -1,   -1,   -1,   -1,   -1,
227 	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
228 	0x02, 0x02,   -1,   -1,   -1,   -1,   -1, 0x00,
229 	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
230 	  -1,   -1,   -1,   -1,   -1,   -1,   -1,   -1,
231 	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
232 	0x05, 0x15,   -1, 0x02,   -1,   -1,   -1,   -1,
233 	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
234 	0x02, 0x02,   -1,   -1,   -1,   -1,   -1,   -1,
235 	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
236 	0x02, 0x00, 0x03, 0x03,   -1,   -1,   -1,   -1,
237 	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
238 	0x04, 0x04, 0x03, 0x09,   -1,   -1,   -1,   -1,
239 	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
240 	  -1,   -1,   -1,   -1,   -1, 0x01, 0x01, 0x01,
241 	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
242 	0x06,   -1,   -1,   -1,   -1,   -1,   -1,   -1,
243 	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
244 	0x02, 0x02,   -1,   -1,   -1,   -1,   -1,   -1,
245 	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
246 	0x02, 0x00, 0x00, 0x00,   -1,   -1,   -1,   -1,
247 	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
248 	  -1,   -1,   -1,   -1,   -1,   -1,   -1,   -1,
249 	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
250 	  -1,   -1,   -1,   -1,   -1,   -1,   -1,   -1,
251 	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
252 	0x02, 0x02,   -1,   -1, 0x02,   -1,   -1,   -1,
253 	0x00, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00,
254 	  -1,   -1, 0x02,   -1,   -1,   -1,   -1, 0x00,
255 	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
256 	  -1,   -1,   -1,   -1,   -1,   -1,   -1,   -1,
257 };
258 
259 /* We only have one of each device, so globals are safe */
260 static device_t pmu = NULL;
261 static device_t pmu_extint = NULL;
262 
263 static int
264 pmuextint_probe(device_t dev)
265 {
266 	const char *type = ofw_bus_get_type(dev);
267 
268 	if (strcmp(type, "extint-gpio1") != 0)
269                 return (ENXIO);
270 
271 	device_set_desc(dev, "Apple PMU99 External Interrupt");
272 	return (0);
273 }
274 
275 static int
276 pmu_probe(device_t dev)
277 {
278 	const char *type = ofw_bus_get_type(dev);
279 
280 	if (strcmp(type, "via-pmu") != 0)
281                 return (ENXIO);
282 
283 	device_set_desc(dev, "Apple PMU99 Controller");
284 	return (0);
285 }
286 
287 
288 static int
289 setup_pmu_intr(device_t dev, device_t extint)
290 {
291 	struct pmu_softc *sc;
292 	sc = device_get_softc(dev);
293 
294 	sc->sc_irqrid = 0;
295 	sc->sc_irq = bus_alloc_resource_any(extint, SYS_RES_IRQ, &sc->sc_irqrid,
296            	RF_ACTIVE);
297         if (sc->sc_irq == NULL) {
298                 device_printf(dev, "could not allocate interrupt\n");
299                 return (ENXIO);
300         }
301 
302 	if (bus_setup_intr(dev, sc->sc_irq, INTR_TYPE_MISC | INTR_MPSAFE
303 	    | INTR_ENTROPY, NULL, pmu_intr, dev, &sc->sc_ih) != 0) {
304                 device_printf(dev, "could not setup interrupt\n");
305                 bus_release_resource(dev, SYS_RES_IRQ, sc->sc_irqrid,
306                     sc->sc_irq);
307                 return (ENXIO);
308         }
309 
310 	return (0);
311 }
312 
313 static int
314 pmuextint_attach(device_t dev)
315 {
316 	pmu_extint = dev;
317 	if (pmu)
318 		return (setup_pmu_intr(pmu,dev));
319 
320 	return (0);
321 }
322 
323 static int
324 pmu_attach(device_t dev)
325 {
326 	struct pmu_softc *sc;
327 
328 	int i;
329 	uint8_t reg;
330 	uint8_t cmd[2] = {2, 0};
331 	uint8_t resp[16];
332 	phandle_t node,child;
333 	struct sysctl_ctx_list *ctx;
334 	struct sysctl_oid *tree;
335 
336 	sc = device_get_softc(dev);
337 	sc->sc_dev = dev;
338 
339 	sc->sc_memrid = 0;
340 	sc->sc_memr = bus_alloc_resource_any(dev, SYS_RES_MEMORY,
341 		          &sc->sc_memrid, RF_ACTIVE);
342 
343 	mtx_init(&sc->sc_mutex,"pmu",NULL,MTX_DEF | MTX_RECURSE);
344 
345 	if (sc->sc_memr == NULL) {
346 		device_printf(dev, "Could not alloc mem resource!\n");
347 		return (ENXIO);
348 	}
349 
350 	/*
351 	 * Our interrupt is attached to a GPIO pin. Depending on probe order,
352 	 * we may not have found it yet. If we haven't, it will find us, and
353 	 * attach our interrupt then.
354 	 */
355 	pmu = dev;
356 	if (pmu_extint != NULL) {
357 		if (setup_pmu_intr(dev,pmu_extint) != 0)
358 			return (ENXIO);
359 	}
360 
361 	sc->sc_autopoll = 0;
362 	sc->sc_batteries = 0;
363 	sc->adb_bus = NULL;
364 	sc->sc_leddev = NULL;
365 
366 	/* Init PMU */
367 
368 	pmu_write_reg(sc, vBufB, pmu_read_reg(sc, vBufB) | vPB4);
369 	pmu_write_reg(sc, vDirB, (pmu_read_reg(sc, vDirB) | vPB4) & ~vPB3);
370 
371 	reg = PMU_DEFAULTS;
372 	pmu_send(sc, PMU_SET_IMASK, 1, &reg, 16, resp);
373 
374 	pmu_write_reg(sc, vIER, 0x94); /* make sure VIA interrupts are on */
375 
376 	pmu_send(sc, PMU_SYSTEM_READY, 1, cmd, 16, resp);
377 	pmu_send(sc, PMU_GET_VERSION, 0, cmd, 16, resp);
378 
379 	/* Initialize child buses (ADB) */
380 	node = ofw_bus_get_node(dev);
381 
382 	for (child = OF_child(node); child != 0; child = OF_peer(child)) {
383 		char name[32];
384 
385 		memset(name, 0, sizeof(name));
386 		OF_getprop(child, "name", name, sizeof(name));
387 
388 		if (bootverbose)
389 			device_printf(dev, "PMU child <%s>\n",name);
390 
391 		if (strncmp(name, "adb", 4) == 0) {
392 			sc->adb_bus = device_add_child(dev,"adb",-1);
393 		}
394 
395 		if (strncmp(name, "power-mgt", 9) == 0) {
396 			uint32_t prim_info[9];
397 
398 			if (OF_getprop(child, "prim-info", prim_info,
399 			    sizeof(prim_info)) >= 7)
400 				sc->sc_batteries = (prim_info[6] >> 16) & 0xff;
401 
402 			if (bootverbose && sc->sc_batteries > 0)
403 				device_printf(dev, "%d batteries detected\n",
404 				    sc->sc_batteries);
405 		}
406 	}
407 
408 	/*
409 	 * Set up sysctls
410 	 */
411 
412 	ctx = device_get_sysctl_ctx(dev);
413 	tree = device_get_sysctl_tree(dev);
414 
415 	SYSCTL_ADD_PROC(ctx, SYSCTL_CHILDREN(tree), OID_AUTO,
416 	    "server_mode", CTLTYPE_INT | CTLFLAG_RW, sc, 0,
417 	    pmu_server_mode, "I", "Enable reboot after power failure");
418 
419 	if (sc->sc_batteries > 0) {
420 		struct sysctl_oid *oid, *battroot;
421 		char battnum[2];
422 
423 		SYSCTL_ADD_PROC(ctx, SYSCTL_CHILDREN(tree), OID_AUTO,
424 		    "acline", CTLTYPE_INT | CTLFLAG_RD, sc, 0,
425 		    pmu_acline_state, "I", "AC Line Status");
426 
427 		battroot = SYSCTL_ADD_NODE(ctx, SYSCTL_CHILDREN(tree), OID_AUTO,
428 		    "batteries", CTLFLAG_RD, 0, "Battery Information");
429 
430 		for (i = 0; i < sc->sc_batteries; i++) {
431 			battnum[0] = i + '0';
432 			battnum[1] = '\0';
433 
434 			oid = SYSCTL_ADD_NODE(ctx, SYSCTL_CHILDREN(battroot),
435 			    OID_AUTO, battnum, CTLFLAG_RD, 0,
436 			    "Battery Information");
437 
438 			SYSCTL_ADD_PROC(ctx, SYSCTL_CHILDREN(oid), OID_AUTO,
439 			    "present", CTLTYPE_INT | CTLFLAG_RD, sc,
440 			    PMU_BATSYSCTL_PRESENT | i, pmu_battquery_sysctl,
441 			    "I", "Battery present");
442 			SYSCTL_ADD_PROC(ctx, SYSCTL_CHILDREN(oid), OID_AUTO,
443 			    "charging", CTLTYPE_INT | CTLFLAG_RD, sc,
444 			    PMU_BATSYSCTL_CHARGING | i, pmu_battquery_sysctl,
445 			    "I", "Battery charging");
446 			SYSCTL_ADD_PROC(ctx, SYSCTL_CHILDREN(oid), OID_AUTO,
447 			    "charge", CTLTYPE_INT | CTLFLAG_RD, sc,
448 			    PMU_BATSYSCTL_CHARGE | i, pmu_battquery_sysctl,
449 			    "I", "Battery charge (mAh)");
450 			SYSCTL_ADD_PROC(ctx, SYSCTL_CHILDREN(oid), OID_AUTO,
451 			    "maxcharge", CTLTYPE_INT | CTLFLAG_RD, sc,
452 			    PMU_BATSYSCTL_MAXCHARGE | i, pmu_battquery_sysctl,
453 			    "I", "Maximum battery capacity (mAh)");
454 			SYSCTL_ADD_PROC(ctx, SYSCTL_CHILDREN(oid), OID_AUTO,
455 			    "rate", CTLTYPE_INT | CTLFLAG_RD, sc,
456 			    PMU_BATSYSCTL_CURRENT | i, pmu_battquery_sysctl,
457 			    "I", "Battery discharge rate (mA)");
458 			SYSCTL_ADD_PROC(ctx, SYSCTL_CHILDREN(oid), OID_AUTO,
459 			    "voltage", CTLTYPE_INT | CTLFLAG_RD, sc,
460 			    PMU_BATSYSCTL_VOLTAGE | i, pmu_battquery_sysctl,
461 			    "I", "Battery voltage (mV)");
462 
463 			/* Knobs for mental compatibility with ACPI */
464 
465 			SYSCTL_ADD_PROC(ctx, SYSCTL_CHILDREN(oid), OID_AUTO,
466 			    "time", CTLTYPE_INT | CTLFLAG_RD, sc,
467 			    PMU_BATSYSCTL_TIME | i, pmu_battquery_sysctl,
468 			    "I", "Time Remaining (minutes)");
469 			SYSCTL_ADD_PROC(ctx, SYSCTL_CHILDREN(oid), OID_AUTO,
470 			    "life", CTLTYPE_INT | CTLFLAG_RD, sc,
471 			    PMU_BATSYSCTL_LIFE | i, pmu_battquery_sysctl,
472 			    "I", "Capacity remaining (percent)");
473 		}
474 	}
475 
476 	/*
477 	 * Set up LED interface
478 	 */
479 
480 	sc->sc_leddev = led_create(pmu_set_sleepled, sc, "sleepled");
481 
482 	/*
483 	 * Register RTC
484 	 */
485 
486 	clock_register(dev, 1000);
487 
488 	/*
489 	 * Register power control handler
490 	 */
491 	EVENTHANDLER_REGISTER(shutdown_final, pmu_shutdown, sc,
492 	    SHUTDOWN_PRI_LAST);
493 
494 	return (bus_generic_attach(dev));
495 }
496 
497 static int
498 pmu_detach(device_t dev)
499 {
500 	struct pmu_softc *sc;
501 
502 	sc = device_get_softc(dev);
503 
504 	if (sc->sc_leddev != NULL)
505 		led_destroy(sc->sc_leddev);
506 
507 	bus_teardown_intr(dev, sc->sc_irq, sc->sc_ih);
508 	bus_release_resource(dev, SYS_RES_IRQ, sc->sc_irqrid, sc->sc_irq);
509 	bus_release_resource(dev, SYS_RES_MEMORY, sc->sc_memrid, sc->sc_memr);
510 	mtx_destroy(&sc->sc_mutex);
511 
512 	return (bus_generic_detach(dev));
513 }
514 
515 static uint8_t
516 pmu_read_reg(struct pmu_softc *sc, u_int offset)
517 {
518 	return (bus_read_1(sc->sc_memr, offset));
519 }
520 
521 static void
522 pmu_write_reg(struct pmu_softc *sc, u_int offset, uint8_t value)
523 {
524 	bus_write_1(sc->sc_memr, offset, value);
525 }
526 
527 static int
528 pmu_send_byte(struct pmu_softc *sc, uint8_t data)
529 {
530 
531 	pmu_out(sc);
532 	pmu_write_reg(sc, vSR, data);
533 	pmu_ack_off(sc);
534 	/* wait for intr to come up */
535 	/* XXX should add a timeout and bail if it expires */
536 	do {} while (pmu_intr_state(sc) == 0);
537 	pmu_ack_on(sc);
538 	do {} while (pmu_intr_state(sc));
539 	pmu_ack_on(sc);
540 	return 0;
541 }
542 
543 static inline int
544 pmu_read_byte(struct pmu_softc *sc, uint8_t *data)
545 {
546 	volatile uint8_t scratch;
547 	pmu_in(sc);
548 	scratch = pmu_read_reg(sc, vSR);
549 	pmu_ack_off(sc);
550 	/* wait for intr to come up */
551 	do {} while (pmu_intr_state(sc) == 0);
552 	pmu_ack_on(sc);
553 	do {} while (pmu_intr_state(sc));
554 	*data = pmu_read_reg(sc, vSR);
555 	return 0;
556 }
557 
558 static int
559 pmu_intr_state(struct pmu_softc *sc)
560 {
561 	return ((pmu_read_reg(sc, vBufB) & vPB3) == 0);
562 }
563 
564 static int
565 pmu_send(void *cookie, int cmd, int length, uint8_t *in_msg, int rlen,
566     uint8_t *out_msg)
567 {
568 	struct pmu_softc *sc = cookie;
569 	int i, rcv_len = -1;
570 	uint8_t out_len, intreg;
571 
572 	intreg = pmu_read_reg(sc, vIER);
573 	intreg &= 0x10;
574 	pmu_write_reg(sc, vIER, intreg);
575 
576 	/* wait idle */
577 	do {} while (pmu_intr_state(sc));
578 
579 	/* send command */
580 	pmu_send_byte(sc, cmd);
581 
582 	/* send length if necessary */
583 	if (pm_send_cmd_type[cmd] < 0) {
584 		pmu_send_byte(sc, length);
585 	}
586 
587 	for (i = 0; i < length; i++) {
588 		pmu_send_byte(sc, in_msg[i]);
589 	}
590 
591 	/* see if there's data to read */
592 	rcv_len = pm_receive_cmd_type[cmd];
593 	if (rcv_len == 0)
594 		goto done;
595 
596 	/* read command */
597 	if (rcv_len == 1) {
598 		pmu_read_byte(sc, out_msg);
599 		goto done;
600 	} else
601 		out_msg[0] = cmd;
602 	if (rcv_len < 0) {
603 		pmu_read_byte(sc, &out_len);
604 		rcv_len = out_len + 1;
605 	}
606 	for (i = 1; i < min(rcv_len, rlen); i++)
607 		pmu_read_byte(sc, &out_msg[i]);
608 
609 done:
610 	pmu_write_reg(sc, vIER, (intreg == 0) ? 0 : 0x90);
611 
612 	return rcv_len;
613 }
614 
615 
616 static u_int
617 pmu_poll(device_t dev)
618 {
619 	pmu_intr(dev);
620 	return (0);
621 }
622 
623 static void
624 pmu_in(struct pmu_softc *sc)
625 {
626 	uint8_t reg;
627 
628 	reg = pmu_read_reg(sc, vACR);
629 	reg &= ~vSR_OUT;
630 	reg |= 0x0c;
631 	pmu_write_reg(sc, vACR, reg);
632 }
633 
634 static void
635 pmu_out(struct pmu_softc *sc)
636 {
637 	uint8_t reg;
638 
639 	reg = pmu_read_reg(sc, vACR);
640 	reg |= vSR_OUT;
641 	reg |= 0x0c;
642 	pmu_write_reg(sc, vACR, reg);
643 }
644 
645 static void
646 pmu_ack_off(struct pmu_softc *sc)
647 {
648 	uint8_t reg;
649 
650 	reg = pmu_read_reg(sc, vBufB);
651 	reg &= ~vPB4;
652 	pmu_write_reg(sc, vBufB, reg);
653 }
654 
655 static void
656 pmu_ack_on(struct pmu_softc *sc)
657 {
658 	uint8_t reg;
659 
660 	reg = pmu_read_reg(sc, vBufB);
661 	reg |= vPB4;
662 	pmu_write_reg(sc, vBufB, reg);
663 }
664 
665 static void
666 pmu_intr(void *arg)
667 {
668 	device_t        dev;
669 	struct pmu_softc *sc;
670 
671 	unsigned int len;
672 	uint8_t resp[16];
673 	uint8_t junk[16];
674 
675         dev = (device_t)arg;
676 	sc = device_get_softc(dev);
677 
678 	mtx_lock(&sc->sc_mutex);
679 
680 	pmu_write_reg(sc, vIFR, 0x90);	/* Clear 'em */
681 	len = pmu_send(sc, PMU_INT_ACK, 0, NULL, 16, resp);
682 
683 	mtx_unlock(&sc->sc_mutex);
684 
685 	if ((len < 1) || (resp[1] == 0)) {
686 		return;
687 	}
688 
689 	if (resp[1] & PMU_INT_ADB) {
690 		/*
691 		 * the PMU will turn off autopolling after each command that
692 		 * it did not issue, so we assume any but TALK R0 is ours and
693 		 * re-enable autopoll here whenever we receive an ACK for a
694 		 * non TR0 command.
695 		 */
696 		mtx_lock(&sc->sc_mutex);
697 
698 		if ((resp[2] & 0x0f) != (ADB_COMMAND_TALK << 2)) {
699 			if (sc->sc_autopoll) {
700 				uint8_t cmd[] = {0, PMU_SET_POLL_MASK,
701 				    (sc->sc_autopoll >> 8) & 0xff,
702 				    sc->sc_autopoll & 0xff};
703 
704 				pmu_send(sc, PMU_ADB_CMD, 4, cmd, 16, junk);
705 			}
706 		}
707 
708 		mtx_unlock(&sc->sc_mutex);
709 
710 		adb_receive_raw_packet(sc->adb_bus,resp[1],resp[2],
711 			len - 3,&resp[3]);
712 	}
713 	if (resp[1] & PMU_INT_ENVIRONMENT) {
714 		/* if the lid was just closed, notify devd. */
715 		if ((resp[2] & PMU_ENV_LID_CLOSED) && (!sc->lid_closed)) {
716 			sc->lid_closed = 1;
717 			if (devctl_process_running())
718 				devctl_notify("PMU", "lid", "close", NULL);
719 		}
720 		else if (!(resp[2] & PMU_ENV_LID_CLOSED) && (sc->lid_closed)) {
721 			/* if the lid was just opened, notify devd. */
722 			if (devctl_process_running())
723 				devctl_notify("PMU", "lid", "open", NULL);
724 			sc->lid_closed = 0;
725 		}
726 	}
727 }
728 
729 static u_int
730 pmu_adb_send(device_t dev, u_char command_byte, int len, u_char *data,
731     u_char poll)
732 {
733 	struct pmu_softc *sc = device_get_softc(dev);
734 	int i,replen;
735 	uint8_t packet[16], resp[16];
736 
737 	/* construct an ADB command packet and send it */
738 
739 	packet[0] = command_byte;
740 
741 	packet[1] = 0;
742 	packet[2] = len;
743 	for (i = 0; i < len; i++)
744 		packet[i + 3] = data[i];
745 
746 	mtx_lock(&sc->sc_mutex);
747 	replen = pmu_send(sc, PMU_ADB_CMD, len + 3, packet, 16, resp);
748 	mtx_unlock(&sc->sc_mutex);
749 
750 	if (poll)
751 		pmu_poll(dev);
752 
753 	return 0;
754 }
755 
756 static u_int
757 pmu_adb_autopoll(device_t dev, uint16_t mask)
758 {
759 	struct pmu_softc *sc = device_get_softc(dev);
760 
761 	/* magical incantation to re-enable autopolling */
762 	uint8_t cmd[] = {0, PMU_SET_POLL_MASK, (mask >> 8) & 0xff, mask & 0xff};
763 	uint8_t resp[16];
764 
765 	mtx_lock(&sc->sc_mutex);
766 
767 	if (sc->sc_autopoll == mask) {
768 		mtx_unlock(&sc->sc_mutex);
769 		return 0;
770 	}
771 
772 	sc->sc_autopoll = mask & 0xffff;
773 
774 	if (mask)
775 		pmu_send(sc, PMU_ADB_CMD, 4, cmd, 16, resp);
776 	else
777 		pmu_send(sc, PMU_ADB_POLL_OFF, 0, NULL, 16, resp);
778 
779 	mtx_unlock(&sc->sc_mutex);
780 
781 	return 0;
782 }
783 
784 static void
785 pmu_shutdown(void *xsc, int howto)
786 {
787 	struct pmu_softc *sc = xsc;
788 	uint8_t cmd[] = {'M', 'A', 'T', 'T'};
789 
790 	if (howto & RB_HALT)
791 		pmu_send(sc, PMU_POWER_OFF, 4, cmd, 0, NULL);
792 	else
793 		pmu_send(sc, PMU_RESET_CPU, 0, NULL, 0, NULL);
794 
795 	for (;;);
796 }
797 
798 static void
799 pmu_set_sleepled(void *xsc, int onoff)
800 {
801 	struct pmu_softc *sc = xsc;
802 	uint8_t cmd[] = {4, 0, 0};
803 
804 	cmd[2] = onoff;
805 
806 	mtx_lock(&sc->sc_mutex);
807 	pmu_send(sc, PMU_SET_SLEEPLED, 3, cmd, 0, NULL);
808 	mtx_unlock(&sc->sc_mutex);
809 }
810 
811 static int
812 pmu_server_mode(SYSCTL_HANDLER_ARGS)
813 {
814 	struct pmu_softc *sc = arg1;
815 
816 	u_int server_mode = 0;
817 	uint8_t getcmd[] = {PMU_PWR_GET_POWERUP_EVENTS};
818 	uint8_t setcmd[] = {0, 0, PMU_PWR_WAKEUP_AC_INSERT};
819 	uint8_t resp[3];
820 	int error, len;
821 
822 	mtx_lock(&sc->sc_mutex);
823 	len = pmu_send(sc, PMU_POWER_EVENTS, 1, getcmd, 3, resp);
824 	mtx_unlock(&sc->sc_mutex);
825 
826 	if (len == 3)
827 		server_mode = (resp[2] & PMU_PWR_WAKEUP_AC_INSERT) ? 1 : 0;
828 
829 	error = sysctl_handle_int(oidp, &server_mode, 0, req);
830 
831 	if (len != 3)
832 		return (EINVAL);
833 
834 	if (error || !req->newptr)
835 		return (error);
836 
837 	if (server_mode == 1)
838 		setcmd[0] = PMU_PWR_SET_POWERUP_EVENTS;
839 	else if (server_mode == 0)
840 		setcmd[0] = PMU_PWR_CLR_POWERUP_EVENTS;
841 	else
842 		return (EINVAL);
843 
844 	setcmd[1] = resp[1];
845 
846 	mtx_lock(&sc->sc_mutex);
847 	pmu_send(sc, PMU_POWER_EVENTS, 3, setcmd, 2, resp);
848 	mtx_unlock(&sc->sc_mutex);
849 
850 	return (0);
851 }
852 
853 static int
854 pmu_query_battery(struct pmu_softc *sc, int batt, struct pmu_battstate *info)
855 {
856 	uint8_t reg;
857 	uint8_t resp[16];
858 	int len;
859 
860 	reg = batt + 1;
861 
862 	mtx_lock(&sc->sc_mutex);
863 	len = pmu_send(sc, PMU_SMART_BATTERY_STATE, 1, &reg, 16, resp);
864 	mtx_unlock(&sc->sc_mutex);
865 
866 	if (len < 3)
867 		return (-1);
868 
869 	/* All PMU battery info replies share a common header:
870 	 * Byte 1	Payload Format
871 	 * Byte 2	Battery Flags
872 	 */
873 
874 	info->state = resp[2];
875 
876 	switch (resp[1]) {
877 	case 3:
878 	case 4:
879 		/*
880 		 * Formats 3 and 4 appear to be the same:
881 		 * Byte 3	Charge
882 		 * Byte 4	Max Charge
883 		 * Byte 5	Current
884 		 * Byte 6	Voltage
885 		 */
886 
887 		info->charge = resp[3];
888 		info->maxcharge = resp[4];
889 		/* Current can be positive or negative */
890 		info->current = (int8_t)resp[5];
891 		info->voltage = resp[6];
892 		break;
893 	case 5:
894 		/*
895 		 * Formats 5 is a wider version of formats 3 and 4
896 		 * Byte 3-4	Charge
897 		 * Byte 5-6	Max Charge
898 		 * Byte 7-8	Current
899 		 * Byte 9-10	Voltage
900 		 */
901 
902 		info->charge = (resp[3] << 8) | resp[4];
903 		info->maxcharge = (resp[5] << 8) | resp[6];
904 		/* Current can be positive or negative */
905 		info->current = (int16_t)((resp[7] << 8) | resp[8]);
906 		info->voltage = (resp[9] << 8) | resp[10];
907 		break;
908 	default:
909 		device_printf(sc->sc_dev, "Unknown battery info format (%d)!\n",
910 		    resp[1]);
911 		return (-1);
912 	}
913 
914 	return (0);
915 }
916 
917 static int
918 pmu_acline_state(SYSCTL_HANDLER_ARGS)
919 {
920 	struct pmu_softc *sc;
921 	struct pmu_battstate batt;
922 	int error, result;
923 
924 	sc = arg1;
925 
926 	/* The PMU treats the AC line status as a property of the battery */
927 	error = pmu_query_battery(sc, 0, &batt);
928 
929 	if (error != 0)
930 		return (error);
931 
932 	result = (batt.state & PMU_PWR_AC_PRESENT) ? 1 : 0;
933 	error = sysctl_handle_int(oidp, &result, 0, req);
934 
935 	return (error);
936 }
937 
938 static int
939 pmu_battquery_sysctl(SYSCTL_HANDLER_ARGS)
940 {
941 	struct pmu_softc *sc;
942 	struct pmu_battstate batt;
943 	int error, result;
944 
945 	sc = arg1;
946 
947 	error = pmu_query_battery(sc, arg2 & 0x00ff, &batt);
948 
949 	if (error != 0)
950 		return (error);
951 
952 	switch (arg2 & 0xff00) {
953 	case PMU_BATSYSCTL_PRESENT:
954 		result = (batt.state & PMU_PWR_BATT_PRESENT) ? 1 : 0;
955 		break;
956 	case PMU_BATSYSCTL_CHARGING:
957 		result = (batt.state & PMU_PWR_BATT_CHARGING) ? 1 : 0;
958 		break;
959 	case PMU_BATSYSCTL_CHARGE:
960 		result = batt.charge;
961 		break;
962 	case PMU_BATSYSCTL_MAXCHARGE:
963 		result = batt.maxcharge;
964 		break;
965 	case PMU_BATSYSCTL_CURRENT:
966 		result = batt.current;
967 		break;
968 	case PMU_BATSYSCTL_VOLTAGE:
969 		result = batt.voltage;
970 		break;
971 	case PMU_BATSYSCTL_TIME:
972 		/* Time remaining until full charge/discharge, in minutes */
973 
974 		if (batt.current >= 0)
975 			result = (batt.maxcharge - batt.charge) /* mAh */ * 60
976 			    / batt.current /* mA */;
977 		else
978 			result = (batt.charge /* mAh */ * 60)
979 			    / (-batt.current /* mA */);
980 		break;
981 	case PMU_BATSYSCTL_LIFE:
982 		/* Battery charge fraction, in percent */
983 		result = (batt.charge * 100) / batt.maxcharge;
984 		break;
985 	default:
986 		/* This should never happen */
987 		result = -1;
988 	};
989 
990 	error = sysctl_handle_int(oidp, &result, 0, req);
991 
992 	return (error);
993 }
994 
995 #define DIFF19041970	2082844800
996 
997 static int
998 pmu_gettime(device_t dev, struct timespec *ts)
999 {
1000 	struct pmu_softc *sc = device_get_softc(dev);
1001 	uint8_t resp[16];
1002 	uint32_t sec;
1003 
1004 	mtx_lock(&sc->sc_mutex);
1005 	pmu_send(sc, PMU_READ_RTC, 0, NULL, 16, resp);
1006 	mtx_unlock(&sc->sc_mutex);
1007 
1008 	memcpy(&sec, &resp[1], 4);
1009 	ts->tv_sec = sec - DIFF19041970;
1010 	ts->tv_nsec = 0;
1011 
1012 	return (0);
1013 }
1014 
1015 static int
1016 pmu_settime(device_t dev, struct timespec *ts)
1017 {
1018 	struct pmu_softc *sc = device_get_softc(dev);
1019 	uint32_t sec;
1020 
1021 	sec = ts->tv_sec + DIFF19041970;
1022 
1023 	mtx_lock(&sc->sc_mutex);
1024 	pmu_send(sc, PMU_SET_RTC, sizeof(sec), (uint8_t *)&sec, 0, NULL);
1025 	mtx_unlock(&sc->sc_mutex);
1026 
1027 	return (0);
1028 }
1029 
1030 int
1031 pmu_set_speed(int low_speed)
1032 {
1033 	struct pmu_softc *sc;
1034 	uint8_t sleepcmd[] = {'W', 'O', 'O', 'F', 0};
1035 	uint8_t resp[16];
1036 
1037 	sc = device_get_softc(pmu);
1038 	pmu_write_reg(sc, vIER, 0x10);
1039 	spinlock_enter();
1040 	mtdec(0x7fffffff);
1041 	mb();
1042 	mtdec(0x7fffffff);
1043 
1044 	sleepcmd[4] = low_speed;
1045 	pmu_send(sc, PMU_CPU_SPEED, 5, sleepcmd, 16, resp);
1046 	unin_chip_sleep(NULL, 1);
1047 	platform_sleep();
1048 	unin_chip_wake(NULL);
1049 
1050 	mtdec(1);	/* Force a decrementer exception */
1051 	spinlock_exit();
1052 	pmu_write_reg(sc, vIER, 0x90);
1053 
1054 	return (0);
1055 }
1056