xref: /freebsd/sys/powerpc/powermac/hrowpicvar.h (revision f81cdf24ba5436367377f7c8e8f51f6df2a75ca7)
1 /*-
2  * SPDX-License-Identifier: BSD-3-Clause
3  *
4  * Copyright 2003 by Peter Grehan. All rights reserved.
5  *
6  * Redistribution and use in source and binary forms, with or without
7  * modification, are permitted provided that the following conditions
8  * are met:
9  * 1. Redistributions of source code must retain the above copyright
10  *    notice, this list of conditions and the following disclaimer.
11  * 2. Redistributions in binary form must reproduce the above copyright
12  *    notice, this list of conditions and the following disclaimer in the
13  *    documentation and/or other materials provided with the distribution.
14  * 3. The name of the author may not be used to endorse or promote products
15  *    derived from this software without specific prior written permission.
16  *
17  * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
18  * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
19  * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
20  * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
21  * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
22  * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
23  * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
24  * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
25  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
26  * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
27  * SUCH DAMAGE.
28  */
29 
30 #ifndef  _POWERPC_POWERMAC_HROWPICVAR_H_
31 #define  _POWERPC_POWERMAC_HROWPICVAR_H_
32 
33 #define HROWPIC_IRQMAX	64
34 #define HROWPIC_IRQ_REGNUM	32	/* irqs per register */
35 #define HROWPIC_IRQ_SHIFT	5	/* high or low irq word */
36 #define HROWPIC_IRQ_MASK ((HROWPIC_IRQMAX-1) >> 1)  /* irq bit pos in word */
37 
38 /*
39  * Register offsets within bank. There are two identical banks,
40  * separated by 16 bytes. Interrupts 0->31 are processed in the
41  * second bank, and 32->63 in the first bank.
42  */
43 #define  HPIC_STATUS	0x00		/* active interrupt sources */
44 #define  HPIC_ENABLE	0x04		/* interrupt asserts ppc EXTINT */
45 #define  HPIC_CLEAR	0x08		/* clear int source */
46 #define  HPIC_TRIGGER	0x0c		/* edge/level int trigger */
47 
48 #define HPIC_PRIMARY	1	/* primary register bank */
49 #define HPIC_SECONDARY  0       /* secondary register bank */
50 
51 /*
52  * Convert an interrupt into a prim/sec bank number
53  */
54 #define HPIC_INT_TO_BANK(x) \
55 	(((x) >> HROWPIC_IRQ_SHIFT) ^ 1)
56 
57 /*
58  * Convert an interrupt into the bit number within a bank register
59  */
60 #define HPIC_INT_TO_REGBIT(x) \
61 	((x) & HROWPIC_IRQ_MASK)
62 
63 #define  HPIC_1ST_OFFSET  0x10		/* offset to primary reg bank */
64 
65 struct hrowpic_softc {
66 	device_t	sc_dev;			/* macio device */
67 	struct resource *sc_rres;		/* macio bus resource */
68 	bus_space_tag_t sc_bt;			/* macio bus tag/handle */
69 	bus_space_handle_t sc_bh;
70 	int		sc_rrid;
71 	uint32_t	sc_softreg[2];		/* ENABLE reg copy */
72 	u_int		sc_vector[HROWPIC_IRQMAX];
73 };
74 
75 #endif  /* _POWERPC_POWERMAC_HROWPICVAR_H_ */
76