1 /*- 2 * SPDX-License-Identifier: BSD-2-Clause 3 * 4 * Copyright (c) 2010 Andreas Tobler 5 * All rights reserved. 6 * 7 * Redistribution and use in source and binary forms, with or without 8 * modification, are permitted provided that the following conditions 9 * are met: 10 * 1. Redistributions of source code must retain the above copyright 11 * notice, this list of conditions and the following disclaimer. 12 * 2. Redistributions in binary form must reproduce the above copyright 13 * notice, this list of conditions and the following disclaimer in the 14 * documentation and/or other materials provided with the distribution. 15 * 16 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR 17 * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES 18 * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. 19 * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, 20 * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, 21 * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; 22 * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED 23 * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, 24 * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY 25 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF 26 * SUCH DAMAGE. 27 */ 28 29 #include <sys/param.h> 30 #include <sys/bus.h> 31 #include <sys/systm.h> 32 #include <sys/module.h> 33 #include <sys/callout.h> 34 #include <sys/conf.h> 35 #include <sys/cpu.h> 36 #include <sys/ctype.h> 37 #include <sys/kernel.h> 38 #include <sys/reboot.h> 39 #include <sys/rman.h> 40 #include <sys/sysctl.h> 41 #include <sys/limits.h> 42 43 #include <machine/bus.h> 44 #include <machine/md_var.h> 45 46 #include <dev/iicbus/iicbus.h> 47 #include <dev/iicbus/iiconf.h> 48 49 #include <dev/ofw/openfirm.h> 50 #include <dev/ofw/ofw_bus.h> 51 #include <powerpc/powermac/powermac_thermal.h> 52 53 /* FCU registers 54 * /u3@0,f8000000/i2c@f8001000/fan@15e 55 */ 56 #define FCU_RPM_FAIL 0x0b /* fans states in bits 0<1-6>7 */ 57 #define FCU_RPM_AVAILABLE 0x0c 58 #define FCU_RPM_ACTIVE 0x0d 59 #define FCU_RPM_READ(x) 0x11 + (x) * 2 60 #define FCU_RPM_SET(x) 0x10 + (x) * 2 61 62 #define FCU_PWM_FAIL 0x2b 63 #define FCU_PWM_AVAILABLE 0x2c 64 #define FCU_PWM_ACTIVE 0x2d 65 #define FCU_PWM_RPM(x) 0x31 + (x) * 2 /* Get RPM. */ 66 #define FCU_PWM_SGET(x) 0x30 + (x) * 2 /* Set or get PWM. */ 67 68 struct fcu_fan { 69 struct pmac_fan fan; 70 device_t dev; 71 72 int id; 73 enum { 74 FCU_FAN_RPM, 75 FCU_FAN_PWM 76 } type; 77 int setpoint; 78 int rpm; 79 }; 80 81 struct fcu_softc { 82 device_t sc_dev; 83 struct intr_config_hook enum_hook; 84 uint32_t sc_addr; 85 struct fcu_fan *sc_fans; 86 int sc_nfans; 87 }; 88 89 /* We can read the PWM and the RPM from a PWM controlled fan. 90 * Offer both values via sysctl. 91 */ 92 enum { 93 FCU_PWM_SYSCTL_PWM = 1 << 8, 94 FCU_PWM_SYSCTL_RPM = 2 << 8 95 }; 96 97 static int fcu_rpm_shift; 98 99 /* Regular bus attachment functions */ 100 static int fcu_probe(device_t); 101 static int fcu_attach(device_t); 102 103 /* Utility functions */ 104 static void fcu_attach_fans(device_t dev); 105 static int fcu_fill_fan_prop(device_t dev); 106 static int fcu_fan_set_rpm(struct fcu_fan *fan, int rpm); 107 static int fcu_fan_get_rpm(struct fcu_fan *fan); 108 static int fcu_fan_set_pwm(struct fcu_fan *fan, int pwm); 109 static int fcu_fan_get_pwm(device_t dev, struct fcu_fan *fan, int *pwm, 110 int *rpm); 111 static int fcu_fanrpm_sysctl(SYSCTL_HANDLER_ARGS); 112 static void fcu_start(void *xdev); 113 static int fcu_write(device_t dev, uint32_t addr, uint8_t reg, uint8_t *buf, 114 int len); 115 static int fcu_read_1(device_t dev, uint32_t addr, uint8_t reg, uint8_t *data); 116 117 static device_method_t fcu_methods[] = { 118 /* Device interface */ 119 DEVMETHOD(device_probe, fcu_probe), 120 DEVMETHOD(device_attach, fcu_attach), 121 { 0, 0 }, 122 }; 123 124 static driver_t fcu_driver = { 125 "fcu", 126 fcu_methods, 127 sizeof(struct fcu_softc) 128 }; 129 130 DRIVER_MODULE(fcu, iicbus, fcu_driver, 0, 0); 131 static MALLOC_DEFINE(M_FCU, "fcu", "FCU Sensor Information"); 132 133 static int 134 fcu_write(device_t dev, uint32_t addr, uint8_t reg, uint8_t *buff, 135 int len) 136 { 137 unsigned char buf[4]; 138 int try = 0; 139 140 struct iic_msg msg[] = { 141 { addr, IIC_M_WR, 0, buf } 142 }; 143 144 msg[0].len = len + 1; 145 buf[0] = reg; 146 memcpy(buf + 1, buff, len); 147 148 for (;;) 149 { 150 if (iicbus_transfer(dev, msg, 1) == 0) 151 return (0); 152 153 if (++try > 5) { 154 device_printf(dev, "iicbus write failed\n"); 155 return (-1); 156 } 157 pause("fcu_write", hz); 158 } 159 } 160 161 static int 162 fcu_read_1(device_t dev, uint32_t addr, uint8_t reg, uint8_t *data) 163 { 164 uint8_t buf[4]; 165 int err, try = 0; 166 167 struct iic_msg msg[2] = { 168 { addr, IIC_M_WR | IIC_M_NOSTOP, 1, ® }, 169 { addr, IIC_M_RD, 1, buf }, 170 }; 171 172 for (;;) 173 { 174 err = iicbus_transfer(dev, msg, 2); 175 if (err != 0) 176 goto retry; 177 178 *data = *((uint8_t*)buf); 179 return (0); 180 retry: 181 if (++try > 5) { 182 device_printf(dev, "iicbus read failed\n"); 183 return (-1); 184 } 185 pause("fcu_read_1", hz); 186 } 187 } 188 189 static int 190 fcu_probe(device_t dev) 191 { 192 const char *name, *compatible; 193 struct fcu_softc *sc; 194 195 name = ofw_bus_get_name(dev); 196 compatible = ofw_bus_get_compat(dev); 197 198 if (!name) 199 return (ENXIO); 200 201 if (strcmp(name, "fan") != 0 || strcmp(compatible, "fcu") != 0) 202 return (ENXIO); 203 204 sc = device_get_softc(dev); 205 sc->sc_dev = dev; 206 sc->sc_addr = iicbus_get_addr(dev); 207 208 device_set_desc(dev, "Apple Fan Control Unit"); 209 210 return (0); 211 } 212 213 static int 214 fcu_attach(device_t dev) 215 { 216 struct fcu_softc *sc; 217 218 sc = device_get_softc(dev); 219 220 sc->enum_hook.ich_func = fcu_start; 221 sc->enum_hook.ich_arg = dev; 222 223 /* We have to wait until interrupts are enabled. I2C read and write 224 * only works if the interrupts are available. 225 * The unin/i2c is controlled by the htpic on unin. But this is not 226 * the master. The openpic on mac-io is controlling the htpic. 227 * This one gets attached after the mac-io probing and then the 228 * interrupts will be available. 229 */ 230 231 if (config_intrhook_establish(&sc->enum_hook) != 0) 232 return (ENOMEM); 233 234 return (0); 235 } 236 237 static void 238 fcu_start(void *xdev) 239 { 240 unsigned char buf[1] = { 0xff }; 241 struct fcu_softc *sc; 242 243 device_t dev = (device_t)xdev; 244 245 sc = device_get_softc(dev); 246 247 /* Start the fcu device. */ 248 fcu_write(sc->sc_dev, sc->sc_addr, 0xe, buf, 1); 249 fcu_write(sc->sc_dev, sc->sc_addr, 0x2e, buf, 1); 250 fcu_read_1(sc->sc_dev, sc->sc_addr, 0, buf); 251 fcu_rpm_shift = (buf[0] == 1) ? 2 : 3; 252 253 device_printf(dev, "FCU initialized, RPM shift: %d\n", 254 fcu_rpm_shift); 255 256 /* Detect and attach child devices. */ 257 258 fcu_attach_fans(dev); 259 260 config_intrhook_disestablish(&sc->enum_hook); 261 262 } 263 264 static int 265 fcu_fan_set_rpm(struct fcu_fan *fan, int rpm) 266 { 267 uint8_t reg; 268 struct fcu_softc *sc; 269 unsigned char buf[2]; 270 271 sc = device_get_softc(fan->dev); 272 273 /* Clamp to allowed range */ 274 rpm = max(fan->fan.min_rpm, rpm); 275 rpm = min(fan->fan.max_rpm, rpm); 276 277 if (fan->type == FCU_FAN_RPM) { 278 reg = FCU_RPM_SET(fan->id); 279 fan->setpoint = rpm; 280 } else { 281 device_printf(fan->dev, "Unknown fan type: %d\n", fan->type); 282 return (ENXIO); 283 } 284 285 buf[0] = rpm >> (8 - fcu_rpm_shift); 286 buf[1] = rpm << fcu_rpm_shift; 287 288 if (fcu_write(sc->sc_dev, sc->sc_addr, reg, buf, 2) < 0) 289 return (EIO); 290 291 return (0); 292 } 293 294 static int 295 fcu_fan_get_rpm(struct fcu_fan *fan) 296 { 297 uint8_t reg; 298 struct fcu_softc *sc; 299 uint8_t buff[2] = { 0, 0 }; 300 uint8_t active = 0, avail = 0, fail = 0; 301 int rpm; 302 303 sc = device_get_softc(fan->dev); 304 305 if (fan->type == FCU_FAN_RPM) { 306 /* Check if the fan is available. */ 307 reg = FCU_RPM_AVAILABLE; 308 if (fcu_read_1(sc->sc_dev, sc->sc_addr, reg, &avail) < 0) 309 return (-1); 310 if ((avail & (1 << fan->id)) == 0) { 311 device_printf(fan->dev, 312 "RPM Fan not available ID: %d\n", fan->id); 313 return (-1); 314 } 315 /* Check if we have a failed fan. */ 316 reg = FCU_RPM_FAIL; 317 if (fcu_read_1(sc->sc_dev, sc->sc_addr, reg, &fail) < 0) 318 return (-1); 319 if ((fail & (1 << fan->id)) != 0) { 320 device_printf(fan->dev, 321 "RPM Fan failed ID: %d\n", fan->id); 322 return (-1); 323 } 324 /* Check if fan is active. */ 325 reg = FCU_RPM_ACTIVE; 326 if (fcu_read_1(sc->sc_dev, sc->sc_addr, reg, &active) < 0) 327 return (-1); 328 if ((active & (1 << fan->id)) == 0) { 329 device_printf(fan->dev, "RPM Fan not active ID: %d\n", 330 fan->id); 331 return (-1); 332 } 333 reg = FCU_RPM_READ(fan->id); 334 335 } else { 336 device_printf(fan->dev, "Unknown fan type: %d\n", fan->type); 337 return (-1); 338 } 339 340 /* It seems that we can read the fans rpm. */ 341 if (fcu_read_1(sc->sc_dev, sc->sc_addr, reg, buff) < 0) 342 return (-1); 343 344 rpm = (buff[0] << (8 - fcu_rpm_shift)) | buff[1] >> fcu_rpm_shift; 345 346 return (rpm); 347 } 348 349 static int 350 fcu_fan_set_pwm(struct fcu_fan *fan, int pwm) 351 { 352 uint8_t reg; 353 struct fcu_softc *sc; 354 uint8_t buf[2]; 355 356 sc = device_get_softc(fan->dev); 357 358 /* Clamp to allowed range */ 359 pwm = max(fan->fan.min_rpm, pwm); 360 pwm = min(fan->fan.max_rpm, pwm); 361 362 if (fan->type == FCU_FAN_PWM) { 363 reg = FCU_PWM_SGET(fan->id); 364 if (pwm > 100) 365 pwm = 100; 366 if (pwm < 30) 367 pwm = 30; 368 fan->setpoint = pwm; 369 } else { 370 device_printf(fan->dev, "Unknown fan type: %d\n", fan->type); 371 return (EIO); 372 } 373 374 buf[0] = (pwm * 2550) / 1000; 375 376 if (fcu_write(sc->sc_dev, sc->sc_addr, reg, buf, 1) < 0) 377 return (EIO); 378 return (0); 379 } 380 381 static int 382 fcu_fan_get_pwm(device_t dev, struct fcu_fan *fan, int *pwm, int *rpm) 383 { 384 uint8_t reg; 385 struct fcu_softc *sc; 386 uint8_t buf[2]; 387 uint8_t active = 0, avail = 0, fail = 0; 388 389 sc = device_get_softc(dev); 390 391 if (fan->type == FCU_FAN_PWM) { 392 /* Check if the fan is available. */ 393 reg = FCU_PWM_AVAILABLE; 394 if (fcu_read_1(sc->sc_dev, sc->sc_addr, reg, &avail) < 0) 395 return (-1); 396 if ((avail & (1 << fan->id)) == 0) { 397 device_printf(dev, "PWM Fan not available ID: %d\n", 398 fan->id); 399 return (-1); 400 } 401 /* Check if we have a failed fan. */ 402 reg = FCU_PWM_FAIL; 403 if (fcu_read_1(sc->sc_dev, sc->sc_addr, reg, &fail) < 0) 404 return (-1); 405 if ((fail & (1 << fan->id)) != 0) { 406 device_printf(dev, "PWM Fan failed ID: %d\n", fan->id); 407 return (-1); 408 } 409 /* Check if fan is active. */ 410 reg = FCU_PWM_ACTIVE; 411 if (fcu_read_1(sc->sc_dev, sc->sc_addr, reg, &active) < 0) 412 return (-1); 413 if ((active & (1 << fan->id)) == 0) { 414 device_printf(dev, "PWM Fan not active ID: %d\n", 415 fan->id); 416 return (-1); 417 } 418 reg = FCU_PWM_SGET(fan->id); 419 } else { 420 device_printf(dev, "Unknown fan type: %d\n", fan->type); 421 return (EIO); 422 } 423 424 /* It seems that we can read the fans pwm. */ 425 if (fcu_read_1(sc->sc_dev, sc->sc_addr, reg, buf) < 0) 426 return (-1); 427 428 *pwm = (buf[0] * 1000) / 2550; 429 430 /* Now read the rpm. */ 431 reg = FCU_PWM_RPM(fan->id); 432 if (fcu_read_1(sc->sc_dev, sc->sc_addr, reg, buf) < 0) 433 return (-1); 434 435 *rpm = (buf[0] << (8 - fcu_rpm_shift)) | buf[1] >> fcu_rpm_shift; 436 437 return (0); 438 } 439 440 /* 441 * This function returns the number of fans. If we call it the second time 442 * and we have allocated memory for sc->sc_fans, we fill in the properties. 443 */ 444 static int 445 fcu_fill_fan_prop(device_t dev) 446 { 447 phandle_t child; 448 struct fcu_softc *sc; 449 u_int id[12]; 450 char location[144]; 451 char type[96]; 452 int i = 0, j, len = 0, prop_len, prev_len = 0; 453 454 sc = device_get_softc(dev); 455 456 child = ofw_bus_get_node(dev); 457 458 /* Fill the fan location property. */ 459 prop_len = OF_getprop(child, "hwctrl-location", location, 460 sizeof(location)); 461 while (len < prop_len) { 462 if (sc->sc_fans != NULL) { 463 strcpy(sc->sc_fans[i].fan.name, location + len); 464 } 465 prev_len = strlen(location + len) + 1; 466 len += prev_len; 467 i++; 468 } 469 if (sc->sc_fans == NULL) 470 return (i); 471 472 /* Fill the fan type property. */ 473 len = 0; 474 i = 0; 475 prev_len = 0; 476 prop_len = OF_getprop(child, "hwctrl-type", type, sizeof(type)); 477 while (len < prop_len) { 478 if (strcmp(type + len, "fan-rpm") == 0) 479 sc->sc_fans[i].type = FCU_FAN_RPM; 480 else 481 sc->sc_fans[i].type = FCU_FAN_PWM; 482 prev_len = strlen(type + len) + 1; 483 len += prev_len; 484 i++; 485 } 486 487 /* Fill the fan ID property. */ 488 prop_len = OF_getprop(child, "hwctrl-id", id, sizeof(id)); 489 for (j = 0; j < i; j++) 490 sc->sc_fans[j].id = ((id[j] >> 8) & 0x0f) % 8; 491 492 /* Fill the fan zone property. */ 493 prop_len = OF_getprop(child, "hwctrl-zone", id, sizeof(id)); 494 for (j = 0; j < i; j++) 495 sc->sc_fans[j].fan.zone = id[j]; 496 497 /* Finish setting up fan properties */ 498 for (j = 0; j < i; j++) { 499 sc->sc_fans[j].dev = sc->sc_dev; 500 if (sc->sc_fans[j].type == FCU_FAN_RPM) { 501 sc->sc_fans[j].fan.min_rpm = 4800 >> fcu_rpm_shift; 502 sc->sc_fans[j].fan.max_rpm = 56000 >> fcu_rpm_shift; 503 sc->sc_fans[j].setpoint = 504 fcu_fan_get_rpm(&sc->sc_fans[j]); 505 sc->sc_fans[j].fan.read = 506 (int (*)(struct pmac_fan *))(fcu_fan_get_rpm); 507 sc->sc_fans[j].fan.set = 508 (int (*)(struct pmac_fan *, int))(fcu_fan_set_rpm); 509 } else { 510 sc->sc_fans[j].fan.min_rpm = 30; /* Percent */ 511 sc->sc_fans[j].fan.max_rpm = 100; 512 sc->sc_fans[j].fan.read = NULL; 513 sc->sc_fans[j].fan.set = 514 (int (*)(struct pmac_fan *, int))(fcu_fan_set_pwm); 515 } 516 sc->sc_fans[j].fan.default_rpm = sc->sc_fans[j].fan.max_rpm; 517 } 518 519 return (i); 520 } 521 522 static int 523 fcu_fanrpm_sysctl(SYSCTL_HANDLER_ARGS) 524 { 525 device_t fcu; 526 struct fcu_softc *sc; 527 struct fcu_fan *fan; 528 int rpm = 0, pwm = 0, error = 0; 529 530 fcu = arg1; 531 sc = device_get_softc(fcu); 532 fan = &sc->sc_fans[arg2 & 0x00ff]; 533 if (fan->type == FCU_FAN_RPM) { 534 rpm = fcu_fan_get_rpm(fan); 535 if (rpm < 0) 536 return (EIO); 537 error = sysctl_handle_int(oidp, &rpm, 0, req); 538 } else { 539 error = fcu_fan_get_pwm(fcu, fan, &pwm, &rpm); 540 if (error < 0) 541 return (EIO); 542 543 switch (arg2 & 0xff00) { 544 case FCU_PWM_SYSCTL_PWM: 545 error = sysctl_handle_int(oidp, &pwm, 0, req); 546 break; 547 case FCU_PWM_SYSCTL_RPM: 548 error = sysctl_handle_int(oidp, &rpm, 0, req); 549 break; 550 default: 551 /* This should never happen */ 552 return (EINVAL); 553 } 554 } 555 556 /* We can only read the RPM from a PWM controlled fan, so return. */ 557 if ((arg2 & 0xff00) == FCU_PWM_SYSCTL_RPM) 558 return (0); 559 560 if (error || !req->newptr) 561 return (error); 562 563 if (fan->type == FCU_FAN_RPM) 564 return (fcu_fan_set_rpm(fan, rpm)); 565 else 566 return (fcu_fan_set_pwm(fan, pwm)); 567 } 568 569 static void 570 fcu_attach_fans(device_t dev) 571 { 572 struct fcu_softc *sc; 573 struct sysctl_oid *oid, *fanroot_oid; 574 struct sysctl_ctx_list *ctx; 575 char sysctl_name[32]; 576 int i, j; 577 578 sc = device_get_softc(dev); 579 580 sc->sc_nfans = 0; 581 582 /* Count the actual number of fans. */ 583 sc->sc_nfans = fcu_fill_fan_prop(dev); 584 585 device_printf(dev, "%d fans detected!\n", sc->sc_nfans); 586 587 if (sc->sc_nfans == 0) { 588 device_printf(dev, "WARNING: No fans detected!\n"); 589 return; 590 } 591 592 sc->sc_fans = malloc(sc->sc_nfans * sizeof(struct fcu_fan), M_FCU, 593 M_WAITOK | M_ZERO); 594 595 ctx = device_get_sysctl_ctx(dev); 596 fanroot_oid = SYSCTL_ADD_NODE(ctx, 597 SYSCTL_CHILDREN(device_get_sysctl_tree(dev)), OID_AUTO, "fans", 598 CTLFLAG_RD | CTLFLAG_MPSAFE, 0, "FCU Fan Information"); 599 600 /* Now we can fill the properties into the allocated struct. */ 601 sc->sc_nfans = fcu_fill_fan_prop(dev); 602 603 /* Register fans with pmac_thermal */ 604 for (i = 0; i < sc->sc_nfans; i++) 605 pmac_thermal_fan_register(&sc->sc_fans[i].fan); 606 607 /* Add sysctls for the fans. */ 608 for (i = 0; i < sc->sc_nfans; i++) { 609 for (j = 0; j < strlen(sc->sc_fans[i].fan.name); j++) { 610 sysctl_name[j] = tolower(sc->sc_fans[i].fan.name[j]); 611 if (isspace(sysctl_name[j])) 612 sysctl_name[j] = '_'; 613 } 614 sysctl_name[j] = 0; 615 616 if (sc->sc_fans[i].type == FCU_FAN_RPM) { 617 oid = SYSCTL_ADD_NODE(ctx, SYSCTL_CHILDREN(fanroot_oid), 618 OID_AUTO, sysctl_name, CTLFLAG_RD | CTLFLAG_MPSAFE, 619 0, "Fan Information"); 620 SYSCTL_ADD_INT(ctx, SYSCTL_CHILDREN(oid), OID_AUTO, 621 "minrpm", CTLFLAG_RD, 622 &(sc->sc_fans[i].fan.min_rpm), 0, 623 "Minimum allowed RPM"); 624 SYSCTL_ADD_INT(ctx, SYSCTL_CHILDREN(oid), OID_AUTO, 625 "maxrpm", CTLFLAG_RD, 626 &(sc->sc_fans[i].fan.max_rpm), 0, 627 "Maximum allowed RPM"); 628 /* I use i to pass the fan id. */ 629 SYSCTL_ADD_PROC(ctx, SYSCTL_CHILDREN(oid), OID_AUTO, 630 "rpm", CTLTYPE_INT | CTLFLAG_RW | CTLFLAG_NEEDGIANT, 631 dev, i, fcu_fanrpm_sysctl, "I", "Fan RPM"); 632 } else { 633 fcu_fan_get_pwm(dev, &sc->sc_fans[i], 634 &sc->sc_fans[i].setpoint, 635 &sc->sc_fans[i].rpm); 636 637 oid = SYSCTL_ADD_NODE(ctx, SYSCTL_CHILDREN(fanroot_oid), 638 OID_AUTO, sysctl_name, CTLFLAG_RD | CTLFLAG_MPSAFE, 639 0, "Fan Information"); 640 SYSCTL_ADD_INT(ctx, SYSCTL_CHILDREN(oid), OID_AUTO, 641 "minpwm", CTLFLAG_RD, 642 &(sc->sc_fans[i].fan.min_rpm), 0, 643 "Minimum allowed PWM in %"); 644 SYSCTL_ADD_INT(ctx, SYSCTL_CHILDREN(oid), OID_AUTO, 645 "maxpwm", CTLFLAG_RD, 646 &(sc->sc_fans[i].fan.max_rpm), 0, 647 "Maximum allowed PWM in %"); 648 /* I use i to pass the fan id or'ed with the type 649 * of info I want to display/modify. 650 */ 651 SYSCTL_ADD_PROC(ctx, SYSCTL_CHILDREN(oid), OID_AUTO, 652 "pwm", CTLTYPE_INT | CTLFLAG_RW | CTLFLAG_NEEDGIANT, 653 dev, FCU_PWM_SYSCTL_PWM | i, fcu_fanrpm_sysctl, "I", 654 "Fan PWM in %"); 655 SYSCTL_ADD_PROC(ctx, SYSCTL_CHILDREN(oid), OID_AUTO, 656 "rpm", CTLTYPE_INT | CTLFLAG_RD | CTLFLAG_NEEDGIANT, 657 dev, FCU_PWM_SYSCTL_RPM | i, fcu_fanrpm_sysctl, "I", 658 "Fan RPM"); 659 } 660 } 661 662 /* Dump fan location, type & RPM. */ 663 if (bootverbose) { 664 device_printf(dev, "Fans\n"); 665 for (i = 0; i < sc->sc_nfans; i++) { 666 device_printf(dev, "Location: %s type: %d ID: %d " 667 "RPM: %d\n", sc->sc_fans[i].fan.name, 668 sc->sc_fans[i].type, sc->sc_fans[i].id, 669 (sc->sc_fans[i].type == FCU_FAN_RPM) ? 670 sc->sc_fans[i].setpoint : 671 sc->sc_fans[i].rpm ); 672 } 673 } 674 } 675