xref: /freebsd/sys/powerpc/mpc85xx/mpc85xx.c (revision 273c26a3c3bea87a241d6879abd4f991db180bf0)
1 /*-
2  * Copyright (C) 2008 Semihalf, Rafal Jaworowski
3  * All rights reserved.
4  *
5  * Redistribution and use in source and binary forms, with or without
6  * modification, are permitted provided that the following conditions
7  * are met:
8  * 1. Redistributions of source code must retain the above copyright
9  *    notice, this list of conditions and the following disclaimer.
10  * 2. Redistributions in binary form must reproduce the above copyright
11  *    notice, this list of conditions and the following disclaimer in the
12  *    documentation and/or other materials provided with the distribution.
13  *
14  * THIS SOFTWARE IS PROVIDED BY AUTHOR AND CONTRIBUTORS ``AS IS'' AND
15  * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
16  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
17  * ARE DISCLAIMED.  IN NO EVENT SHALL AUTHOR OR CONTRIBUTORS BE LIABLE
18  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
19  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
20  * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
21  * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
22  * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
23  * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
24  * SUCH DAMAGE.
25  */
26 
27 #include <sys/cdefs.h>
28 __FBSDID("$FreeBSD$");
29 
30 #include "opt_platform.h"
31 #include <sys/param.h>
32 #include <sys/systm.h>
33 #include <sys/lock.h>
34 #include <sys/mutex.h>
35 #include <sys/reboot.h>
36 #include <sys/rman.h>
37 
38 #include <vm/vm.h>
39 #include <vm/vm_param.h>
40 #include <vm/pmap.h>
41 
42 #include <machine/cpu.h>
43 #include <machine/cpufunc.h>
44 #include <machine/machdep.h>
45 #include <machine/pio.h>
46 #include <machine/spr.h>
47 
48 #include <dev/fdt/fdt_common.h>
49 
50 #include <dev/fdt/fdt_common.h>
51 #include <dev/ofw/ofw_bus.h>
52 #include <dev/ofw/ofw_bus_subr.h>
53 #include <dev/ofw/openfirm.h>
54 
55 #include <powerpc/mpc85xx/mpc85xx.h>
56 
57 
58 /*
59  * MPC85xx system specific routines
60  */
61 
62 uint32_t
63 ccsr_read4(uintptr_t addr)
64 {
65 	volatile uint32_t *ptr = (void *)addr;
66 
67 	return (*ptr);
68 }
69 
70 void
71 ccsr_write4(uintptr_t addr, uint32_t val)
72 {
73 	volatile uint32_t *ptr = (void *)addr;
74 
75 	*ptr = val;
76 	powerpc_iomb();
77 }
78 
79 int
80 law_getmax(void)
81 {
82 	uint32_t ver;
83 	int law_max;
84 
85 	ver = SVR_VER(mfspr(SPR_SVR));
86 	switch (ver) {
87 	case SVR_MPC8555:
88 	case SVR_MPC8555E:
89 		law_max = 8;
90 		break;
91 	case SVR_MPC8533:
92 	case SVR_MPC8533E:
93 	case SVR_MPC8548:
94 	case SVR_MPC8548E:
95 		law_max = 10;
96 		break;
97 	case SVR_P5020:
98 	case SVR_P5020E:
99 		law_max = 32;
100 		break;
101 	default:
102 		law_max = 8;
103 	}
104 
105 	return (law_max);
106 }
107 
108 static inline void
109 law_write(uint32_t n, uint64_t bar, uint32_t sr)
110 {
111 
112 	if (mpc85xx_is_qoriq()) {
113 		ccsr_write4(OCP85XX_LAWBARH(n), bar >> 32);
114 		ccsr_write4(OCP85XX_LAWBARL(n), bar);
115 		ccsr_write4(OCP85XX_LAWSR_QORIQ(n), sr);
116 		ccsr_read4(OCP85XX_LAWSR_QORIQ(n));
117 	} else {
118 		ccsr_write4(OCP85XX_LAWBAR(n), bar >> 12);
119 		ccsr_write4(OCP85XX_LAWSR_85XX(n), sr);
120 		ccsr_read4(OCP85XX_LAWSR_85XX(n));
121 	}
122 
123 	/*
124 	 * The last write to LAWAR should be followed by a read
125 	 * of LAWAR before any device try to use any of windows.
126 	 * What more the read of LAWAR should be followed by isync
127 	 * instruction.
128 	 */
129 
130 	isync();
131 }
132 
133 static inline void
134 law_read(uint32_t n, uint64_t *bar, uint32_t *sr)
135 {
136 
137 	if (mpc85xx_is_qoriq()) {
138 		*bar = (uint64_t)ccsr_read4(OCP85XX_LAWBARH(n)) << 32 |
139 		    ccsr_read4(OCP85XX_LAWBARL(n));
140 		*sr = ccsr_read4(OCP85XX_LAWSR_QORIQ(n));
141 	} else {
142 		*bar = (uint64_t)ccsr_read4(OCP85XX_LAWBAR(n)) << 12;
143 		*sr = ccsr_read4(OCP85XX_LAWSR_85XX(n));
144 	}
145 }
146 
147 static int
148 law_find_free(void)
149 {
150 	uint32_t i,sr;
151 	uint64_t bar;
152 	int law_max;
153 
154 	law_max = law_getmax();
155 	/* Find free LAW */
156 	for (i = 0; i < law_max; i++) {
157 		law_read(i, &bar, &sr);
158 		if ((sr & 0x80000000) == 0)
159 			break;
160 	}
161 
162 	return (i);
163 }
164 
165 #define	_LAW_SR(trgt,size)	(0x80000000 | (trgt << 20) | \
166 				(flsl(size + (size - 1)) - 2))
167 
168 int
169 law_enable(int trgt, uint64_t bar, uint32_t size)
170 {
171 	uint64_t bar_tmp;
172 	uint32_t sr, sr_tmp;
173 	int i, law_max;
174 
175 	if (size == 0)
176 		return (0);
177 
178 	law_max = law_getmax();
179 	sr = _LAW_SR(trgt, size);
180 
181 	/* Bail if already programmed. */
182 	for (i = 0; i < law_max; i++) {
183 		law_read(i, &bar_tmp, &sr_tmp);
184 		if (sr == sr_tmp && bar == bar_tmp)
185 			return (0);
186 	}
187 
188 	/* Find an unused access window. */
189 	i = law_find_free();
190 
191 	if (i == law_max)
192 		return (ENOSPC);
193 
194 	law_write(i, bar, sr);
195 	return (0);
196 }
197 
198 int
199 law_disable(int trgt, uint64_t bar, uint32_t size)
200 {
201 	uint64_t bar_tmp;
202 	uint32_t sr, sr_tmp;
203 	int i, law_max;
204 
205 	law_max = law_getmax();
206 	sr = _LAW_SR(trgt, size);
207 
208 	/* Find and disable requested LAW. */
209 	for (i = 0; i < law_max; i++) {
210 		law_read(i, &bar_tmp, &sr_tmp);
211 		if (sr == sr_tmp && bar == bar_tmp) {
212 			law_write(i, 0, 0);
213 			return (0);
214 		}
215 	}
216 
217 	return (ENOENT);
218 }
219 
220 int
221 law_pci_target(struct resource *res, int *trgt_mem, int *trgt_io)
222 {
223 	u_long start;
224 	uint32_t ver;
225 	int trgt, rv;
226 
227 	ver = SVR_VER(mfspr(SPR_SVR));
228 
229 	start = rman_get_start(res) & 0xf000;
230 
231 	rv = 0;
232 	trgt = -1;
233 	switch (start) {
234 	case 0x0000:
235 	case 0x8000:
236 		trgt = 0;
237 		break;
238 	case 0x1000:
239 	case 0x9000:
240 		trgt = 1;
241 		break;
242 	case 0x2000:
243 	case 0xa000:
244 		if (ver == SVR_MPC8548E || ver == SVR_MPC8548)
245 			trgt = 3;
246 		else
247 			trgt = 2;
248 		break;
249 	case 0x3000:
250 	case 0xb000:
251 		if (ver == SVR_MPC8548E || ver == SVR_MPC8548)
252 			rv = EINVAL;
253 		else
254 			trgt = 3;
255 		break;
256 	default:
257 		rv = ENXIO;
258 	}
259 	if (rv == 0) {
260 		*trgt_mem = trgt;
261 		*trgt_io = trgt;
262 	}
263 	return (rv);
264 }
265 
266 static void
267 l3cache_inval(void)
268 {
269 
270 	/* Flash invalidate the CPC and clear all the locks */
271 	ccsr_write4(OCP85XX_CPC_CSR0, OCP85XX_CPC_CSR0_FI |
272 	    OCP85XX_CPC_CSR0_LFC);
273 	while (ccsr_read4(OCP85XX_CPC_CSR0) & (OCP85XX_CPC_CSR0_FI |
274 	    OCP85XX_CPC_CSR0_LFC))
275 		;
276 }
277 
278 static void
279 l3cache_enable(void)
280 {
281 
282 	ccsr_write4(OCP85XX_CPC_CSR0, OCP85XX_CPC_CSR0_CE |
283 	    OCP85XX_CPC_CSR0_PE);
284 	/* Read back to sync write */
285 	ccsr_read4(OCP85XX_CPC_CSR0);
286 }
287 
288 void
289 mpc85xx_enable_l3_cache(void)
290 {
291 	uint32_t csr, size, ver;
292 
293 	/* Enable L3 CoreNet Platform Cache (CPC) */
294 	ver = SVR_VER(mfspr(SPR_SVR));
295 	if (ver == SVR_P2041 || ver == SVR_P2041E || ver == SVR_P3041 ||
296 	    ver == SVR_P3041E || ver == SVR_P5020 || ver == SVR_P5020E) {
297 		csr = ccsr_read4(OCP85XX_CPC_CSR0);
298 		if ((csr & OCP85XX_CPC_CSR0_CE) == 0) {
299 			l3cache_inval();
300 			l3cache_enable();
301 		}
302 
303 		csr = ccsr_read4(OCP85XX_CPC_CSR0);
304 		if ((boothowto & RB_VERBOSE) != 0 ||
305 		    (csr & OCP85XX_CPC_CSR0_CE) == 0) {
306 			size = OCP85XX_CPC_CFG0_SZ_K(ccsr_read4(OCP85XX_CPC_CFG0));
307 			printf("L3 Corenet Platform Cache: %d KB %sabled\n",
308 			    size, (csr & OCP85XX_CPC_CSR0_CE) == 0 ?
309 			    "dis" : "en");
310 		}
311 	}
312 }
313 
314 int
315 mpc85xx_is_qoriq(void)
316 {
317 	uint16_t pvr = mfpvr() >> 16;
318 
319 	/* QorIQ register set is only in e500mc and derivative core based SoCs. */
320 	if (pvr == FSL_E500mc || pvr == FSL_E5500 || pvr == FSL_E6500)
321 		return (1);
322 
323 	return (0);
324 }
325 
326 static void
327 mpc85xx_dataloss_erratum_spr976(void)
328 {
329 	uint32_t svr = SVR_VER(mfspr(SPR_SVR));
330 
331 	/* Ignore whether it's the E variant */
332 	svr &= ~0x8;
333 
334 	if (svr != SVR_P3041 && svr != SVR_P4040 &&
335 	    svr != SVR_P4080 && svr != SVR_P5020)
336 		return;
337 
338 	mb();
339 	isync();
340 	mtspr(976, (mfspr(976) & ~0x1f8) | 0x48);
341 	isync();
342 }
343 
344 static vm_offset_t
345 mpc85xx_map_dcsr(void)
346 {
347 	phandle_t node;
348 	u_long b, s;
349 	int err;
350 
351 	/*
352 	 * Try to access the dcsr node directly i.e. through /aliases/.
353 	 */
354 	if ((node = OF_finddevice("dcsr")) != -1)
355 		if (fdt_is_compatible_strict(node, "fsl,dcsr"))
356 			goto moveon;
357 	/*
358 	 * Find the node the long way.
359 	 */
360 	if ((node = OF_finddevice("/")) == -1)
361 		return (0);
362 
363 	if ((node = ofw_bus_find_compatible(node, "fsl,dcsr")) == 0)
364 		return (0);
365 
366 moveon:
367 	err = fdt_get_range(node, 0, &b, &s);
368 
369 	if (err != 0)
370 		return (0);
371 
372 	law_enable(OCP85XX_TGTIF_DCSR, b, 0x400000);
373 	return pmap_early_io_map(b, 0x400000);
374 }
375 
376 
377 
378 void
379 mpc85xx_fix_errata(vm_offset_t va_ccsr)
380 {
381 	uint32_t svr = SVR_VER(mfspr(SPR_SVR));
382 	vm_offset_t va_dcsr;
383 
384 	/* Ignore whether it's the E variant */
385 	svr &= ~0x8;
386 
387 	if (svr != SVR_P3041 && svr != SVR_P4040 &&
388 	    svr != SVR_P4080 && svr != SVR_P5020)
389 		return;
390 
391 	if (mfmsr() & PSL_EE)
392 		return;
393 
394 	/*
395 	 * dcsr region need to be mapped thus patch can refer to.
396 	 * Align dcsr right after ccsbar.
397 	 */
398 	va_dcsr = mpc85xx_map_dcsr();
399 	if (va_dcsr == 0)
400 		goto err;
401 
402 	/*
403 	 * As A004510 errata specify, special purpose register 976
404 	 * SPR976[56:60] = 6'b001001 must be set. e500mc core reference manual
405 	 * does not document SPR976 register.
406 	 */
407 	mpc85xx_dataloss_erratum_spr976();
408 
409 	/*
410 	 * Specific settings in the CCF and core platform cache (CPC)
411 	 * are required to reconfigure the CoreNet coherency fabric.
412 	 * The register settings that should be updated are described
413 	 * in errata and relay on base address, offset and updated value.
414 	 * Special conditions must be used to update these registers correctly.
415 	 */
416 	dataloss_erratum_access(va_dcsr + 0xb0e08, 0xe0201800);
417 	dataloss_erratum_access(va_dcsr + 0xb0e18, 0xe0201800);
418 	dataloss_erratum_access(va_dcsr + 0xb0e38, 0xe0400000);
419 	dataloss_erratum_access(va_dcsr + 0xb0008, 0x00900000);
420 	dataloss_erratum_access(va_dcsr + 0xb0e40, 0xe00a0000);
421 
422 	switch (svr) {
423 	case SVR_P5020:
424 		dataloss_erratum_access(va_ccsr + 0x18600, 0xc0000000);
425 		break;
426 	case SVR_P4040:
427 	case SVR_P4080:
428 		dataloss_erratum_access(va_ccsr + 0x18600, 0xff000000);
429 		break;
430 	case SVR_P3041:
431 		dataloss_erratum_access(va_ccsr + 0x18600, 0xf0000000);
432 	}
433 	dataloss_erratum_access(va_ccsr + 0x10f00, 0x415e5000);
434 	dataloss_erratum_access(va_ccsr + 0x11f00, 0x415e5000);
435 
436 err:
437 	return;
438 }
439