1 /*- 2 * Copyright (c) 2016 Justin Hibbits 3 * All rights reserved. 4 * 5 * Redistribution and use in source and binary forms, with or without 6 * modification, are permitted provided that the following conditions 7 * are met: 8 * 1. Redistributions of source code must retain the above copyright 9 * notice, this list of conditions and the following disclaimer. 10 * 2. Redistributions in binary form must reproduce the above copyright 11 * notice, this list of conditions and the following disclaimer in the 12 * documentation and/or other materials provided with the distribution. 13 * 14 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND 15 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE 16 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE 17 * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE 18 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL 19 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS 20 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) 21 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT 22 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY 23 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF 24 * SUCH DAMAGE. 25 */ 26 27 #include <sys/cdefs.h> 28 __FBSDID("$FreeBSD$"); 29 30 #include <sys/param.h> 31 #include <sys/systm.h> 32 #include <sys/bus.h> 33 #include <sys/endian.h> 34 #include <sys/kernel.h> 35 #include <sys/module.h> 36 #include <sys/malloc.h> 37 #include <sys/rman.h> 38 #include <sys/timeet.h> 39 #include <sys/timetc.h> 40 #include <sys/watchdog.h> 41 #include <sys/fbio.h> 42 #include <sys/consio.h> 43 #include <sys/eventhandler.h> 44 #include <sys/gpio.h> 45 46 #include <vm/vm.h> 47 #include <vm/pmap.h> 48 49 #include <dev/fdt/fdt_common.h> 50 #include <dev/ofw/openfirm.h> 51 #include <dev/ofw/ofw_bus.h> 52 #include <dev/ofw/ofw_bus_subr.h> 53 54 #include <dev/videomode/videomode.h> 55 #include <dev/videomode/edidvar.h> 56 57 #include <dev/vt/vt.h> 58 #include <dev/vt/colors/vt_termcolors.h> 59 60 #include <powerpc/mpc85xx/mpc85xx.h> 61 62 #include "gpio_if.h" 63 64 #include <machine/bus.h> 65 #include <machine/cpu.h> 66 67 #include "fb_if.h" 68 69 #define DIU_DESC_1 0x000 /* Plane1 Area Descriptor Pointer Register */ 70 #define DIU_DESC_2 0x004 /* Plane2 Area Descriptor Pointer Register */ 71 #define DIU_DESC_3 0x008 /* Plane3 Area Descriptor Pointer Register */ 72 #define DIU_GAMMA 0x00C /* Gamma Register */ 73 #define DIU_PALETTE 0x010 /* Palette Register */ 74 #define DIU_CURSOR 0x014 /* Cursor Register */ 75 #define DIU_CURS_POS 0x018 /* Cursor Position Register */ 76 #define CURSOR_Y_SHIFT 16 77 #define CURSOR_X_SHIFT 0 78 #define DIU_DIU_MODE 0x01C /* DIU4 Mode */ 79 #define DIU_MODE_M 0x7 80 #define DIU_MODE_S 0 81 #define DIU_MODE_NORMAL 0x1 82 #define DIU_MODE_2 0x2 83 #define DIU_MODE_3 0x3 84 #define DIU_MODE_COLBAR 0x4 85 #define DIU_BGND 0x020 /* Background */ 86 #define DIU_BGND_WB 0x024 /* Background Color in write back Mode Register */ 87 #define DIU_DISP_SIZE 0x028 /* Display Size */ 88 #define DELTA_Y_S 16 89 #define DELTA_X_S 0 90 #define DIU_WB_SIZE 0x02C /* Write back Plane Size Register */ 91 #define DELTA_Y_WB_S 16 92 #define DELTA_X_WB_S 0 93 #define DIU_WB_MEM_ADDR 0x030 /* Address to Store the write back Plane Register */ 94 #define DIU_HSYN_PARA 0x034 /* Horizontal Sync Parameter */ 95 #define BP_H_SHIFT 22 96 #define PW_H_SHIFT 11 97 #define FP_H_SHIFT 0 98 #define DIU_VSYN_PARA 0x038 /* Vertical Sync Parameter */ 99 #define BP_V_SHIFT 22 100 #define PW_V_SHIFT 11 101 #define FP_V_SHIFT 0 102 #define DIU_SYNPOL 0x03C /* Synchronize Polarity */ 103 #define BP_VS (1 << 4) 104 #define BP_HS (1 << 3) 105 #define INV_CS (1 << 2) 106 #define INV_VS (1 << 1) 107 #define INV_HS (1 << 0) 108 #define INV_PDI_VS (1 << 8) /* Polarity of PDI input VSYNC. */ 109 #define INV_PDI_HS (1 << 9) /* Polarity of PDI input HSYNC. */ 110 #define INV_PDI_DE (1 << 10) /* Polarity of PDI input DE. */ 111 #define DIU_THRESHOLD 0x040 /* Threshold */ 112 #define LS_BF_VS_SHIFT 16 113 #define OUT_BUF_LOW_SHIFT 0 114 #define DIU_INT_STATUS 0x044 /* Interrupt Status */ 115 #define DIU_INT_MASK 0x048 /* Interrupt Mask */ 116 #define DIU_COLBAR_1 0x04C /* COLBAR_1 */ 117 #define DIU_COLORBARn_R(x) ((x & 0xff) << 16) 118 #define DIU_COLORBARn_G(x) ((x & 0xff) << 8) 119 #define DIU_COLORBARn_B(x) ((x & 0xff) << 0) 120 #define DIU_COLBAR_2 0x050 /* COLBAR_2 */ 121 #define DIU_COLBAR_3 0x054 /* COLBAR_3 */ 122 #define DIU_COLBAR_4 0x058 /* COLBAR_4 */ 123 #define DIU_COLBAR_5 0x05c /* COLBAR_5 */ 124 #define DIU_COLBAR_6 0x060 /* COLBAR_6 */ 125 #define DIU_COLBAR_7 0x064 /* COLBAR_7 */ 126 #define DIU_COLBAR_8 0x068 /* COLBAR_8 */ 127 #define DIU_FILLING 0x06C /* Filling Register */ 128 #define DIU_PLUT 0x070 /* Priority Look Up Table Register */ 129 130 /* Control Descriptor */ 131 #define DIU_CTRLDESCL(n, m) 0x200 + (0x40 * n) + 0x4 * (m - 1) 132 #define DIU_CTRLDESCLn_1(n) DIU_CTRLDESCL(n, 1) 133 #define DIU_CTRLDESCLn_2(n) DIU_CTRLDESCL(n, 2) 134 #define DIU_CTRLDESCLn_3(n) DIU_CTRLDESCL(n, 3) 135 #define TRANS_SHIFT 20 136 #define DIU_CTRLDESCLn_4(n) DIU_CTRLDESCL(n, 4) 137 #define BPP_MASK 0xf /* Bit per pixel Mask */ 138 #define BPP_SHIFT 16 /* Bit per pixel Shift */ 139 #define BPP24 0x5 140 #define EN_LAYER (1 << 31) /* Enable the layer */ 141 #define DIU_CTRLDESCLn_5(n) DIU_CTRLDESCL(n, 5) 142 #define DIU_CTRLDESCLn_6(n) DIU_CTRLDESCL(n, 6) 143 #define DIU_CTRLDESCLn_7(n) DIU_CTRLDESCL(n, 7) 144 #define DIU_CTRLDESCLn_8(n) DIU_CTRLDESCL(n, 8) 145 #define DIU_CTRLDESCLn_9(n) DIU_CTRLDESCL(n, 9) 146 147 #define NUM_LAYERS 1 148 149 struct panel_info { 150 uint32_t panel_width; 151 uint32_t panel_height; 152 uint32_t panel_hbp; 153 uint32_t panel_hpw; 154 uint32_t panel_hfp; 155 uint32_t panel_vbp; 156 uint32_t panel_vpw; 157 uint32_t panel_vfp; 158 uint32_t panel_freq; 159 uint32_t clk_div; 160 }; 161 162 struct diu_area_descriptor { 163 uint32_t pixel_format; 164 uint32_t bitmap_address; 165 uint32_t source_size; 166 uint32_t aoi_size; 167 uint32_t aoi_offset; 168 uint32_t display_offset; 169 uint32_t chroma_key_max; 170 uint32_t chroma_key_min; 171 uint32_t next_ad_addr; 172 } __aligned(32); 173 174 struct diu_softc { 175 struct resource *res[2]; 176 void *ih; 177 device_t sc_dev; 178 device_t sc_fbd; /* fbd child */ 179 struct fb_info sc_info; 180 struct panel_info sc_panel; 181 struct diu_area_descriptor *sc_planes[3]; 182 uint8_t *sc_gamma; 183 uint8_t *sc_cursor; 184 }; 185 186 static struct resource_spec diu_spec[] = { 187 { SYS_RES_MEMORY, 0, RF_ACTIVE }, 188 { SYS_RES_IRQ, 0, RF_ACTIVE }, 189 { -1, 0 } 190 }; 191 192 static int 193 diu_probe(device_t dev) 194 { 195 196 if (!ofw_bus_status_okay(dev)) 197 return (ENXIO); 198 199 if (!ofw_bus_is_compatible(dev, "fsl,diu")) 200 return (ENXIO); 201 202 device_set_desc(dev, "Freescale Display Interface Unit"); 203 return (BUS_PROBE_DEFAULT); 204 } 205 206 static void 207 diu_intr(void *arg) 208 { 209 struct diu_softc *sc; 210 int reg; 211 212 sc = arg; 213 214 /* Ack interrupts */ 215 reg = bus_read_4(sc->res[0], DIU_INT_STATUS); 216 bus_write_4(sc->res[0], DIU_INT_STATUS, reg); 217 218 /* TODO interrupt handler */ 219 } 220 221 static int 222 diu_set_pxclk(device_t dev, unsigned int freq) 223 { 224 phandle_t node; 225 unsigned long bus_freq; 226 uint32_t pxclk_set; 227 uint32_t clkdvd; 228 int res; 229 230 node = ofw_bus_get_node(device_get_parent(dev)); 231 if ((res = OF_getencprop(node, "bus-frequency", 232 (pcell_t *)&bus_freq, sizeof(bus_freq)) <= 0)) { 233 device_printf(dev, "Unable to get bus frequency\n"); 234 return (ENXIO); 235 } 236 237 /* freq is in kHz */ 238 freq *= 1000; 239 /* adding freq/2 to round-to-closest */ 240 pxclk_set = min(max((bus_freq + freq/2) / freq, 2), 255) << 16; 241 pxclk_set |= OCP85XX_CLKDVDR_PXCKEN; 242 clkdvd = ccsr_read4(OCP85XX_CLKDVDR); 243 clkdvd &= ~(OCP85XX_CLKDVDR_PXCKEN | OCP85XX_CLKDVDR_PXCKINV | 244 OCP85XX_CLKDVDR_PXCLK_MASK); 245 ccsr_write4(OCP85XX_CLKDVDR, clkdvd); 246 ccsr_write4(OCP85XX_CLKDVDR, clkdvd | pxclk_set); 247 248 return (0); 249 } 250 251 static int 252 diu_init(struct diu_softc *sc) 253 { 254 struct panel_info *panel; 255 int reg; 256 257 panel = &sc->sc_panel; 258 259 /* Temporarily disable the DIU while configuring */ 260 reg = bus_read_4(sc->res[0], DIU_DIU_MODE); 261 reg &= ~(DIU_MODE_M << DIU_MODE_S); 262 bus_write_4(sc->res[0], DIU_DIU_MODE, reg); 263 264 if (diu_set_pxclk(sc->sc_dev, panel->panel_freq) < 0) { 265 return (ENXIO); 266 } 267 268 /* Configure DIU */ 269 /* Need to set these somehow later... */ 270 bus_write_4(sc->res[0], DIU_GAMMA, vtophys(sc->sc_gamma)); 271 bus_write_4(sc->res[0], DIU_CURSOR, vtophys(sc->sc_cursor)); 272 bus_write_4(sc->res[0], DIU_CURS_POS, 0); 273 274 reg = ((sc->sc_info.fb_height) << DELTA_Y_S); 275 reg |= sc->sc_info.fb_width; 276 bus_write_4(sc->res[0], DIU_DISP_SIZE, reg); 277 278 reg = (panel->panel_hbp << BP_H_SHIFT); 279 reg |= (panel->panel_hpw << PW_H_SHIFT); 280 reg |= (panel->panel_hfp << FP_H_SHIFT); 281 bus_write_4(sc->res[0], DIU_HSYN_PARA, reg); 282 283 reg = (panel->panel_vbp << BP_V_SHIFT); 284 reg |= (panel->panel_vpw << PW_V_SHIFT); 285 reg |= (panel->panel_vfp << FP_V_SHIFT); 286 bus_write_4(sc->res[0], DIU_VSYN_PARA, reg); 287 288 bus_write_4(sc->res[0], DIU_BGND, 0); 289 290 /* Mask all the interrupts */ 291 bus_write_4(sc->res[0], DIU_INT_MASK, 0x3f); 292 293 /* Reset all layers */ 294 sc->sc_planes[0] = contigmalloc(sizeof(struct diu_area_descriptor), 295 M_DEVBUF, M_ZERO, 0, BUS_SPACE_MAXADDR_32BIT, 32, 0); 296 bus_write_4(sc->res[0], DIU_DESC_1, vtophys(sc->sc_planes[0])); 297 bus_write_4(sc->res[0], DIU_DESC_2, 0); 298 bus_write_4(sc->res[0], DIU_DESC_3, 0); 299 300 /* Setup first plane */ 301 /* Area descriptor fields are little endian, so byte swap. */ 302 /* Word 0: Pixel format */ 303 /* Set to 8:8:8:8 ARGB, 4 bytes per pixel, no flip. */ 304 #define MAKE_PXLFMT(as,rs,gs,bs,a,r,g,b,f,s) \ 305 htole32((as << (4 * a)) | (rs << 4 * r) | \ 306 (gs << 4 * g) | (bs << 4 * b) | \ 307 (f << 28) | (s << 16) | \ 308 (a << 25) | (r << 19) | \ 309 (g << 21) | (b << 24)) 310 reg = MAKE_PXLFMT(8, 8, 8, 8, 3, 2, 1, 0, 1, 3); 311 sc->sc_planes[0]->pixel_format = reg; 312 /* Word 1: Bitmap address */ 313 sc->sc_planes[0]->bitmap_address = htole32(sc->sc_info.fb_pbase); 314 /* Word 2: Source size/global alpha */ 315 reg = (sc->sc_info.fb_width | (sc->sc_info.fb_height << 12)); 316 sc->sc_planes[0]->source_size = htole32(reg); 317 /* Word 3: AOI Size */ 318 reg = (sc->sc_info.fb_width | (sc->sc_info.fb_height << 16)); 319 sc->sc_planes[0]->aoi_size = htole32(reg); 320 /* Word 4: AOI Offset */ 321 sc->sc_planes[0]->aoi_offset = 0; 322 /* Word 5: Display offset */ 323 sc->sc_planes[0]->display_offset = 0; 324 /* Word 6: Chroma key max */ 325 sc->sc_planes[0]->chroma_key_max = 0; 326 /* Word 7: Chroma key min */ 327 reg = 255 << 16 | 255 << 8 | 255; 328 sc->sc_planes[0]->chroma_key_min = htole32(reg); 329 /* Word 8: Next AD */ 330 sc->sc_planes[0]->next_ad_addr = 0; 331 332 /* TODO: derive this from the panel size */ 333 bus_write_4(sc->res[0], DIU_PLUT, 0x1f5f666); 334 335 /* Enable DIU in normal mode */ 336 reg = bus_read_4(sc->res[0], DIU_DIU_MODE); 337 reg &= ~(DIU_MODE_M << DIU_MODE_S); 338 reg |= (DIU_MODE_NORMAL << DIU_MODE_S); 339 bus_write_4(sc->res[0], DIU_DIU_MODE, reg); 340 341 return (0); 342 } 343 344 static int 345 diu_attach(device_t dev) 346 { 347 struct edid_info *edid; 348 struct diu_softc *sc; 349 const struct videomode *videomode; 350 void *edid_cells; 351 const char *vm_name; 352 phandle_t node; 353 int h, r, w; 354 int err, i; 355 356 sc = device_get_softc(dev); 357 sc->sc_dev = dev; 358 359 if (bus_alloc_resources(dev, diu_spec, sc->res)) { 360 device_printf(dev, "could not allocate resources\n"); 361 return (ENXIO); 362 } 363 364 node = ofw_bus_get_node(dev); 365 /* Setup interrupt handler */ 366 err = bus_setup_intr(dev, sc->res[1], INTR_TYPE_BIO | INTR_MPSAFE, 367 NULL, diu_intr, sc, &sc->ih); 368 if (err) { 369 device_printf(dev, "Unable to alloc interrupt resource.\n"); 370 return (ENXIO); 371 } 372 373 /* TODO: Eventually, allow EDID to be dynamically provided. */ 374 if (OF_getprop_alloc(node, "edid", 1, &edid_cells) <= 0) { 375 /* 376 * u-boot uses the environment variable name 'video-mode', so 377 * just use the same name here. Should allow another variable 378 * that better fits our design model, but this is fine. 379 */ 380 if ((vm_name = kern_getenv("video-mode")) == NULL) { 381 device_printf(dev, 382 "No EDID data and no video-mode env set\n"); 383 return (ENXIO); 384 } 385 } 386 if (edid_cells != NULL) { 387 if (edid_parse(edid_cells, edid) != 0) { 388 device_printf(dev, "Error parsing EDID\n"); 389 OF_prop_free(edid_cells); 390 return (ENXIO); 391 } 392 videomode = edid->edid_preferred_mode; 393 } else { 394 /* Parse video-mode kenv variable. */ 395 if ((err = sscanf(vm_name, "fslfb:%dx%d@%d", &w, &h, &r)) != 3) { 396 device_printf(dev, 397 "Cannot parse video mode: %s\n", vm_name); 398 return (ENXIO); 399 } 400 videomode = pick_mode_by_ref(w, h, r); 401 if (videomode == NULL) { 402 device_printf(dev, 403 "Cannot find mode for %dx%d@%d", w, h, r); 404 return (ENXIO); 405 } 406 } 407 408 sc->sc_panel.panel_width = videomode->hdisplay; 409 sc->sc_panel.panel_height = videomode->vdisplay; 410 sc->sc_panel.panel_hbp = videomode->hsync_start - videomode->hdisplay; 411 sc->sc_panel.panel_hfp = videomode->htotal - videomode->hsync_end; 412 sc->sc_panel.panel_hpw = videomode->hsync_end - videomode->hsync_start; 413 sc->sc_panel.panel_vbp = videomode->vsync_start - videomode->vdisplay; 414 sc->sc_panel.panel_vfp = videomode->vtotal - videomode->vsync_end; 415 sc->sc_panel.panel_vpw = videomode->vsync_end - videomode->vsync_start; 416 sc->sc_panel.panel_freq = videomode->dot_clock; 417 418 sc->sc_info.fb_width = sc->sc_panel.panel_width; 419 sc->sc_info.fb_height = sc->sc_panel.panel_height; 420 sc->sc_info.fb_stride = sc->sc_info.fb_width * 4; 421 sc->sc_info.fb_bpp = sc->sc_info.fb_depth = 32; 422 sc->sc_info.fb_size = sc->sc_info.fb_height * sc->sc_info.fb_stride; 423 sc->sc_info.fb_vbase = (intptr_t)contigmalloc(sc->sc_info.fb_size, 424 M_DEVBUF, M_ZERO, 0, BUS_SPACE_MAXADDR_32BIT, PAGE_SIZE, 0); 425 sc->sc_info.fb_pbase = (intptr_t)vtophys(sc->sc_info.fb_vbase); 426 427 /* Gamma table is 3 consecutive segments of 256 bytes. */ 428 sc->sc_gamma = contigmalloc(3 * 256, M_DEVBUF, 0, 0, 429 BUS_SPACE_MAXADDR_32BIT, PAGE_SIZE, 0); 430 /* Initialize gamma to default */ 431 for (i = 0; i < 3 * 256; i++) 432 sc->sc_gamma[i] = (i % 256); 433 434 /* Cursor format is 32x32x16bpp */ 435 sc->sc_cursor = contigmalloc(32 * 32 * 2, M_DEVBUF, M_ZERO, 0, 436 BUS_SPACE_MAXADDR_32BIT, PAGE_SIZE, 0); 437 438 diu_init(sc); 439 440 sc->sc_info.fb_name = device_get_nameunit(dev); 441 442 /* Ask newbus to attach framebuffer device to me. */ 443 sc->sc_fbd = device_add_child(dev, "fbd", device_get_unit(dev)); 444 if (sc->sc_fbd == NULL) 445 device_printf(dev, "Can't attach fbd device\n"); 446 447 if ((err = device_probe_and_attach(sc->sc_fbd)) != 0) { 448 device_printf(dev, "Failed to attach fbd device: %d\n", err); 449 } 450 451 return (0); 452 } 453 454 static struct fb_info * 455 diu_fb_getinfo(device_t dev) 456 { 457 struct diu_softc *sc = device_get_softc(dev); 458 459 return (&sc->sc_info); 460 } 461 462 static device_method_t diu_methods[] = { 463 DEVMETHOD(device_probe, diu_probe), 464 DEVMETHOD(device_attach, diu_attach), 465 466 /* Framebuffer service methods */ 467 DEVMETHOD(fb_getinfo, diu_fb_getinfo), 468 { 0, 0 } 469 }; 470 471 static driver_t diu_driver = { 472 "fb", 473 diu_methods, 474 sizeof(struct diu_softc), 475 }; 476 477 static devclass_t diu_devclass; 478 479 DRIVER_MODULE(fb, simplebus, diu_driver, diu_devclass, 0, 0); 480