1 /* 2 * Copyright (C) 1995, 1996 Wolfgang Solfrank. 3 * Copyright (C) 1995, 1996 TooLs GmbH. 4 * All rights reserved. 5 * 6 * Redistribution and use in source and binary forms, with or without 7 * modification, are permitted provided that the following conditions 8 * are met: 9 * 1. Redistributions of source code must retain the above copyright 10 * notice, this list of conditions and the following disclaimer. 11 * 2. Redistributions in binary form must reproduce the above copyright 12 * notice, this list of conditions and the following disclaimer in the 13 * documentation and/or other materials provided with the distribution. 14 * 3. All advertising materials mentioning features or use of this software 15 * must display the following acknowledgement: 16 * This product includes software developed by TooLs GmbH. 17 * 4. The name of TooLs GmbH may not be used to endorse or promote products 18 * derived from this software without specific prior written permission. 19 * 20 * THIS SOFTWARE IS PROVIDED BY TOOLS GMBH ``AS IS'' AND ANY EXPRESS OR 21 * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES 22 * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. 23 * IN NO EVENT SHALL TOOLS GMBH BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, 24 * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, 25 * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; 26 * OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, 27 * WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR 28 * OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF 29 * ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. 30 * 31 * $NetBSD: trap.h,v 1.7 2002/02/22 13:51:40 kleink Exp $ 32 * $FreeBSD$ 33 */ 34 35 #ifndef _POWERPC_TRAP_H_ 36 #define _POWERPC_TRAP_H_ 37 38 #define EXC_RSVD 0x0000 /* Reserved */ 39 #define EXC_RST 0x0100 /* Reset; all but IBM4xx */ 40 #define EXC_MCHK 0x0200 /* Machine Check */ 41 #define EXC_DSI 0x0300 /* Data Storage Interrupt */ 42 #define EXC_ISI 0x0400 /* Instruction Storage Interrupt */ 43 #define EXC_EXI 0x0500 /* External Interrupt */ 44 #define EXC_ALI 0x0600 /* Alignment Interrupt */ 45 #define EXC_PGM 0x0700 /* Program Interrupt */ 46 #define EXC_FPU 0x0800 /* Floating-point Unavailable */ 47 #define EXC_DECR 0x0900 /* Decrementer Interrupt */ 48 #define EXC_SC 0x0c00 /* System Call */ 49 #define EXC_TRC 0x0d00 /* Trace */ 50 #define EXC_FPA 0x0e00 /* Floating-point Assist */ 51 52 /* The following is only available on the 601: */ 53 #define EXC_RUNMODETRC 0x2000 /* Run Mode/Trace Exception */ 54 55 /* The following are only available on 7400(G4): */ 56 #define EXC_VEC 0x0f20 /* AltiVec Unavailable */ 57 #define EXC_VECAST 0x1600 /* AltiVec Assist */ 58 59 /* The following are only available on 604/750/7400: */ 60 #define EXC_PERF 0x0f00 /* Performance Monitoring */ 61 #define EXC_BPT 0x1300 /* Instruction Breakpoint */ 62 #define EXC_SMI 0x1400 /* System Managment Interrupt */ 63 64 /* The following are only available on 750/7400: */ 65 #define EXC_THRM 0x1700 /* Thermal Management Interrupt */ 66 67 /* And these are only on the 603: */ 68 #define EXC_IMISS 0x1000 /* Instruction translation miss */ 69 #define EXC_DLMISS 0x1100 /* Data load translation miss */ 70 #define EXC_DSMISS 0x1200 /* Data store translation miss */ 71 72 /* The following are only available on 405 (and 403?) */ 73 #define EXC_CII 0x0100 /* Critical Input Interrupt */ 74 #define EXC_PIT 0x1000 /* Programmable Interval Timer */ 75 #define EXC_FIT 0x1010 /* Fixed Interval Timer */ 76 #define EXC_WDOG 0x1020 /* Watchdog Timer */ 77 #define EXC_DTMISS 0x1100 /* Data TLB Miss */ 78 #define EXC_ITMISS 0x1200 /* Instruction TLB Miss */ 79 #define EXC_DEBUG 0x2000 /* Debug trap */ 80 81 #define EXC_LAST 0x2f00 /* Last possible exception vector */ 82 83 #define EXC_AST 0x3000 /* Fake AST vector */ 84 85 /* Trap was in user mode */ 86 #define EXC_USER 0x10000 87 88 89 /* 90 * EXC_ALI sets bits in the DSISR and DAR to provide enough 91 * information to recover from the unaligned access without needing to 92 * parse the offending instruction. This includes certain bits of the 93 * opcode, and information about what registers are used. The opcode 94 * indicator values below come from Appendix F of Book III of "The 95 * PowerPC Architecture". 96 */ 97 98 #define EXC_ALI_OPCODE_INDICATOR(dsisr) ((dsisr >> 10) & 0x7f) 99 #define EXC_ALI_LFD 0x09 100 #define EXC_ALI_STFD 0x0b 101 102 /* Macros to extract register information */ 103 #define EXC_ALI_RST(dsisr) ((dsisr >> 5) & 0x1f) /* source or target */ 104 #define EXC_ALI_RA(dsisr) (dsisr & 0x1f) 105 106 #endif /* _POWERPC_TRAP_H_ */ 107