xref: /freebsd/sys/powerpc/fpu/fpu_arith.h (revision 77a1348b3c1cfe8547be49a121b56299a1e18b69)
1 /*	$NetBSD: fpu_arith.h,v 1.4 2005/12/24 20:07:28 perry Exp $ */
2 /* $FreeBSD$ */
3 
4 /*-
5  * SPDX-License-Identifier: BSD-3-Clause
6  *
7  * Copyright (c) 1992, 1993
8  *	The Regents of the University of California.  All rights reserved.
9  *
10  * This software was developed by the Computer Systems Engineering group
11  * at Lawrence Berkeley Laboratory under DARPA contract BG 91-66 and
12  * contributed to Berkeley.
13  *
14  * All advertising materials mentioning features or use of this software
15  * must display the following acknowledgement:
16  *	This product includes software developed by the University of
17  *	California, Lawrence Berkeley Laboratory.
18  *
19  * Redistribution and use in source and binary forms, with or without
20  * modification, are permitted provided that the following conditions
21  * are met:
22  * 1. Redistributions of source code must retain the above copyright
23  *    notice, this list of conditions and the following disclaimer.
24  * 2. Redistributions in binary form must reproduce the above copyright
25  *    notice, this list of conditions and the following disclaimer in the
26  *    documentation and/or other materials provided with the distribution.
27  * 3. Neither the name of the University nor the names of its contributors
28  *    may be used to endorse or promote products derived from this software
29  *    without specific prior written permission.
30  *
31  * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
32  * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
33  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
34  * ARE DISCLAIMED.  IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
35  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
36  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
37  * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
38  * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
39  * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
40  * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
41  * SUCH DAMAGE.
42  *
43  *	@(#)fpu_arith.h	8.1 (Berkeley) 6/11/93
44  */
45 
46 /*
47  * Extended-precision arithmetic.
48  *
49  * We hold the notion of a `carry register', which may or may not be a
50  * machine carry bit or register.  On the SPARC, it is just the machine's
51  * carry bit.
52  *
53  * In the worst case, you can compute the carry from x+y as
54  *	(unsigned)(x + y) < (unsigned)x
55  * and from x+y+c as
56  *	((unsigned)(x + y + c) <= (unsigned)x && (y|c) != 0)
57  * for example.
58  */
59 
60 
61 #ifndef FPE_USE_ASM
62 
63 /* set up for extended-precision arithemtic */
64 #define	FPU_DECL_CARRY quad_t fpu_carry, fpu_tmp;
65 
66 /*
67  * We have three kinds of add:
68  *	add with carry:					  r = x + y + c
69  *	add (ignoring current carry) and set carry:	c'r = x + y + 0
70  *	add with carry and set carry:			c'r = x + y + c
71  * The macros use `C' for `use carry' and `S' for `set carry'.
72  * Note that the state of the carry is undefined after ADDC and SUBC,
73  * so if all you have for these is `add with carry and set carry',
74  * that is OK.
75  *
76  * The same goes for subtract, except that we compute x - y - c.
77  *
78  * Finally, we have a way to get the carry into a `regular' variable,
79  * or set it from a value.  SET_CARRY turns 0 into no-carry, nonzero
80  * into carry; GET_CARRY sets its argument to 0 or 1.
81  */
82 #define	FPU_ADDC(r, x, y) \
83 	(r) = (x) + (y) + (!!fpu_carry)
84 #define	FPU_ADDS(r, x, y) \
85 	{ \
86 		fpu_tmp = (quad_t)(x) + (quad_t)(y); \
87 		(r) = (u_int)fpu_tmp; \
88 		fpu_carry = ((fpu_tmp & 0xffffffff00000000LL) != 0); \
89 	}
90 #define	FPU_ADDCS(r, x, y) \
91 	{ \
92 		fpu_tmp = (quad_t)(x) + (quad_t)(y) + (!!fpu_carry); \
93 		(r) = (u_int)fpu_tmp; \
94 		fpu_carry = ((fpu_tmp & 0xffffffff00000000LL) != 0); \
95 	}
96 #define	FPU_SUBC(r, x, y) \
97 	(r) = (x) - (y) - (!!fpu_carry)
98 #define	FPU_SUBS(r, x, y) \
99 	{ \
100 		fpu_tmp = (quad_t)(x) - (quad_t)(y); \
101 		(r) = (u_int)fpu_tmp; \
102 		fpu_carry = ((fpu_tmp & 0xffffffff00000000LL) != 0); \
103 	}
104 #define	FPU_SUBCS(r, x, y) \
105 	{ \
106 		fpu_tmp = (quad_t)(x) - (quad_t)(y) - (!!fpu_carry); \
107 		(r) = (u_int)fpu_tmp; \
108 		fpu_carry = ((fpu_tmp & 0xffffffff00000000LL) != 0); \
109 	}
110 
111 #define	FPU_GET_CARRY(r) (r) = (!!fpu_carry)
112 #define	FPU_SET_CARRY(v) fpu_carry = ((v) != 0)
113 
114 #else
115 /* set up for extended-precision arithemtic */
116 #define	FPU_DECL_CARRY
117 
118 /*
119  * We have three kinds of add:
120  *	add with carry:					  r = x + y + c
121  *	add (ignoring current carry) and set carry:	c'r = x + y + 0
122  *	add with carry and set carry:			c'r = x + y + c
123  * The macros use `C' for `use carry' and `S' for `set carry'.
124  * Note that the state of the carry is undefined after ADDC and SUBC,
125  * so if all you have for these is `add with carry and set carry',
126  * that is OK.
127  *
128  * The same goes for subtract, except that we compute x - y - c.
129  *
130  * Finally, we have a way to get the carry into a `regular' variable,
131  * or set it from a value.  SET_CARRY turns 0 into no-carry, nonzero
132  * into carry; GET_CARRY sets its argument to 0 or 1.
133  */
134 #define	FPU_ADDC(r, x, y) \
135 	__asm volatile("adde %0,%1,%2" : "=r"(r) : "r"(x), "r"(y))
136 #define	FPU_ADDS(r, x, y) \
137 	__asm volatile("addc %0,%1,%2" : "=r"(r) : "r"(x), "r"(y))
138 #define	FPU_ADDCS(r, x, y) \
139 	__asm volatile("adde %0,%1,%2" : "=r"(r) : "r"(x), "r"(y))
140 #define	FPU_SUBC(r, x, y) \
141 	__asm volatile("subfe %0,%2,%1" : "=r"(r) : "r"(x), "r"(y))
142 #define	FPU_SUBS(r, x, y) \
143 	__asm volatile("subfc %0,%2,%1" : "=r"(r) : "r"(x), "r"(y))
144 #define	FPU_SUBCS(r, x, y) \
145 	__asm volatile("subfe %0,%2,%1" : "=r"(r) : "r"(x), "r"(y))
146 
147 #define	FPU_GET_CARRY(r) __asm volatile("li %0,0; addie %0,%0,0" : "=r"(r))
148 /* This one needs to destroy a temp register. */
149 #define	FPU_SET_CARRY(v) do { int __tmp;				\
150 		__asm volatile("addic %0,%0,-1" : "r"(__tmp) : "r"(v)); \
151 	} while (0)
152 
153 #define	FPU_SHL1_BY_ADD	/* shift left 1 faster by ADDC than (a<<1)|(b>>31) */
154 #endif
155