xref: /freebsd/sys/powerpc/fpu/fpu_arith.h (revision 0b3105a37d7adcadcb720112fed4dc4e8040be99)
1 /*	$NetBSD: fpu_arith.h,v 1.4 2005/12/24 20:07:28 perry Exp $ */
2 /* $FreeBSD$ */
3 
4 /*
5  * Copyright (c) 1992, 1993
6  *	The Regents of the University of California.  All rights reserved.
7  *
8  * This software was developed by the Computer Systems Engineering group
9  * at Lawrence Berkeley Laboratory under DARPA contract BG 91-66 and
10  * contributed to Berkeley.
11  *
12  * All advertising materials mentioning features or use of this software
13  * must display the following acknowledgement:
14  *	This product includes software developed by the University of
15  *	California, Lawrence Berkeley Laboratory.
16  *
17  * Redistribution and use in source and binary forms, with or without
18  * modification, are permitted provided that the following conditions
19  * are met:
20  * 1. Redistributions of source code must retain the above copyright
21  *    notice, this list of conditions and the following disclaimer.
22  * 2. Redistributions in binary form must reproduce the above copyright
23  *    notice, this list of conditions and the following disclaimer in the
24  *    documentation and/or other materials provided with the distribution.
25  * 3. Neither the name of the University nor the names of its contributors
26  *    may be used to endorse or promote products derived from this software
27  *    without specific prior written permission.
28  *
29  * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
30  * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
31  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
32  * ARE DISCLAIMED.  IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
33  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
34  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
35  * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
36  * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
37  * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
38  * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
39  * SUCH DAMAGE.
40  *
41  *	@(#)fpu_arith.h	8.1 (Berkeley) 6/11/93
42  */
43 
44 /*
45  * Extended-precision arithmetic.
46  *
47  * We hold the notion of a `carry register', which may or may not be a
48  * machine carry bit or register.  On the SPARC, it is just the machine's
49  * carry bit.
50  *
51  * In the worst case, you can compute the carry from x+y as
52  *	(unsigned)(x + y) < (unsigned)x
53  * and from x+y+c as
54  *	((unsigned)(x + y + c) <= (unsigned)x && (y|c) != 0)
55  * for example.
56  */
57 
58 
59 #ifndef FPE_USE_ASM
60 
61 /* set up for extended-precision arithemtic */
62 #define	FPU_DECL_CARRY quad_t fpu_carry, fpu_tmp;
63 
64 /*
65  * We have three kinds of add:
66  *	add with carry:					  r = x + y + c
67  *	add (ignoring current carry) and set carry:	c'r = x + y + 0
68  *	add with carry and set carry:			c'r = x + y + c
69  * The macros use `C' for `use carry' and `S' for `set carry'.
70  * Note that the state of the carry is undefined after ADDC and SUBC,
71  * so if all you have for these is `add with carry and set carry',
72  * that is OK.
73  *
74  * The same goes for subtract, except that we compute x - y - c.
75  *
76  * Finally, we have a way to get the carry into a `regular' variable,
77  * or set it from a value.  SET_CARRY turns 0 into no-carry, nonzero
78  * into carry; GET_CARRY sets its argument to 0 or 1.
79  */
80 #define	FPU_ADDC(r, x, y) \
81 	(r) = (x) + (y) + (!!fpu_carry)
82 #define	FPU_ADDS(r, x, y) \
83 	{ \
84 		fpu_tmp = (quad_t)(x) + (quad_t)(y); \
85 		(r) = (u_int)fpu_tmp; \
86 		fpu_carry = ((fpu_tmp & 0xffffffff00000000LL) != 0); \
87 	}
88 #define	FPU_ADDCS(r, x, y) \
89 	{ \
90 		fpu_tmp = (quad_t)(x) + (quad_t)(y) + (!!fpu_carry); \
91 		(r) = (u_int)fpu_tmp; \
92 		fpu_carry = ((fpu_tmp & 0xffffffff00000000LL) != 0); \
93 	}
94 #define	FPU_SUBC(r, x, y) \
95 	(r) = (x) - (y) - (!!fpu_carry)
96 #define	FPU_SUBS(r, x, y) \
97 	{ \
98 		fpu_tmp = (quad_t)(x) - (quad_t)(y); \
99 		(r) = (u_int)fpu_tmp; \
100 		fpu_carry = ((fpu_tmp & 0xffffffff00000000LL) != 0); \
101 	}
102 #define	FPU_SUBCS(r, x, y) \
103 	{ \
104 		fpu_tmp = (quad_t)(x) - (quad_t)(y) - (!!fpu_carry); \
105 		(r) = (u_int)fpu_tmp; \
106 		fpu_carry = ((fpu_tmp & 0xffffffff00000000LL) != 0); \
107 	}
108 
109 #define	FPU_GET_CARRY(r) (r) = (!!fpu_carry)
110 #define	FPU_SET_CARRY(v) fpu_carry = ((v) != 0)
111 
112 #else
113 /* set up for extended-precision arithemtic */
114 #define	FPU_DECL_CARRY
115 
116 /*
117  * We have three kinds of add:
118  *	add with carry:					  r = x + y + c
119  *	add (ignoring current carry) and set carry:	c'r = x + y + 0
120  *	add with carry and set carry:			c'r = x + y + c
121  * The macros use `C' for `use carry' and `S' for `set carry'.
122  * Note that the state of the carry is undefined after ADDC and SUBC,
123  * so if all you have for these is `add with carry and set carry',
124  * that is OK.
125  *
126  * The same goes for subtract, except that we compute x - y - c.
127  *
128  * Finally, we have a way to get the carry into a `regular' variable,
129  * or set it from a value.  SET_CARRY turns 0 into no-carry, nonzero
130  * into carry; GET_CARRY sets its argument to 0 or 1.
131  */
132 #define	FPU_ADDC(r, x, y) \
133 	__asm volatile("adde %0,%1,%2" : "=r"(r) : "r"(x), "r"(y))
134 #define	FPU_ADDS(r, x, y) \
135 	__asm volatile("addc %0,%1,%2" : "=r"(r) : "r"(x), "r"(y))
136 #define	FPU_ADDCS(r, x, y) \
137 	__asm volatile("adde %0,%1,%2" : "=r"(r) : "r"(x), "r"(y))
138 #define	FPU_SUBC(r, x, y) \
139 	__asm volatile("subfe %0,%2,%1" : "=r"(r) : "r"(x), "r"(y))
140 #define	FPU_SUBS(r, x, y) \
141 	__asm volatile("subfc %0,%2,%1" : "=r"(r) : "r"(x), "r"(y))
142 #define	FPU_SUBCS(r, x, y) \
143 	__asm volatile("subfe %0,%2,%1" : "=r"(r) : "r"(x), "r"(y))
144 
145 #define	FPU_GET_CARRY(r) __asm volatile("li %0,0; addie %0,%0,0" : "=r"(r))
146 /* This one needs to destroy a temp register. */
147 #define	FPU_SET_CARRY(v) do { int __tmp;				\
148 		__asm volatile("addic %0,%0,-1" : "r"(__tmp) : "r"(v)); \
149 	} while (0)
150 
151 #define	FPU_SHL1_BY_ADD	/* shift left 1 faster by ADDC than (a<<1)|(b>>31) */
152 #endif
153