xref: /freebsd/sys/powerpc/conf/GENERIC (revision 195ebc7e9e4b129de810833791a19dfb4349d6a9)
1#
2# GENERIC -- Generic kernel configuration file for FreeBSD/powerpc
3#
4# For more information on this file, please read the handbook section on
5# Kernel Configuration Files:
6#
7#    http://www.FreeBSD.org/doc/en_US.ISO8859-1/books/handbook/kernelconfig-config.html
8#
9# The handbook is also available locally in /usr/share/doc/handbook
10# if you've installed the doc distribution, otherwise always see the
11# FreeBSD World Wide Web server (http://www.FreeBSD.org/) for the
12# latest information.
13#
14# An exhaustive list of options and more detailed explanations of the
15# device lines is also present in the ../../conf/NOTES and NOTES files.
16# If you are in doubt as to the purpose or necessity of a line, check first
17# in NOTES.
18#
19# $FreeBSD$
20
21cpu		AIM
22ident		GENERIC
23
24#To statically compile in device wiring instead of /boot/device.hints
25#hints		"GENERIC.hints"
26
27makeoptions	DEBUG=-g		#Build kernel with gdb(1) debug symbols
28
29# Platform support
30options 	POWERMAC		#NewWorld Apple PowerMacs
31options 	PSIM			#GDB PSIM ppc simulator
32
33options 	SCHED_ULE		#ULE scheduler
34options 	INET			#InterNETworking
35options 	INET6			#IPv6 communications protocols
36options 	SCTP			#Stream Control Transmission Protocol
37options 	FFS			#Berkeley Fast Filesystem
38options 	SOFTUPDATES		#Enable FFS soft updates support
39options 	UFS_ACL			#Support for access control lists
40options 	UFS_DIRHASH		#Improve performance on big directories
41options 	UFS_GJOURNAL		#Enable gjournal-based UFS journaling
42options 	MD_ROOT			#MD is a potential root device
43options 	NFSCLIENT		#Network Filesystem Client
44options 	NFSSERVER		#Network Filesystem Server
45options 	NFSLOCKD		#Network Lock Manager
46options 	NFS_ROOT		#NFS usable as root device
47options 	MSDOSFS			#MSDOS Filesystem
48options 	CD9660			#ISO 9660 Filesystem
49options 	PROCFS			#Process filesystem (requires PSEUDOFS)
50options 	PSEUDOFS		#Pseudo-filesystem framework
51options 	GEOM_PART_GPT		#GUID Partition Tables.
52options 	GEOM_LABEL		#Provides labelization
53options 	COMPAT_43TTY		#BSD 4.3 TTY compat (sgtty)
54options 	COMPAT_FREEBSD4		#Keep this for a while
55options 	COMPAT_FREEBSD5		#Compatible with FreeBSD5
56options 	COMPAT_FREEBSD6		#Compatible with FreeBSD6
57options 	COMPAT_FREEBSD7		#Compatible with FreeBSD7
58options 	SCSI_DELAY=5000		#Delay (in ms) before probing SCSI
59options 	KTRACE			#ktrace(1) syscall trace support
60options 	STACK			#stack(9) support
61options 	SYSVSHM			#SYSV-style shared memory
62options 	SYSVMSG			#SYSV-style message queues
63options 	SYSVSEM			#SYSV-style semaphores
64options 	_KPOSIX_PRIORITY_SCHEDULING #Posix P1003_1B real-time extensions
65options 	HWPMC_HOOKS		# Necessary kernel hooks for hwpmc(4)
66options 	AUDIT			# Security event auditing
67options 	MAC			# TrustedBSD MAC Framework
68
69# Debugging for use in -current
70options 	KDB			#Enable the kernel debugger
71options 	DDB			#Support DDB
72options 	INVARIANTS		#Enable calls of extra sanity checking
73options 	INVARIANT_SUPPORT	#Extra sanity checks of internal structures, required by INVARIANTS
74options 	WITNESS			#Enable checks to detect deadlocks and cycles
75options 	WITNESS_SKIPSPIN	#Don't run witness on spinlocks for speed
76
77# To make an SMP kernel, the next line is needed
78#options 	SMP			# Symmetric MultiProcessor Kernel
79
80# CPU frequency control
81device		cpufreq
82
83# Standard busses
84device		pci
85
86# ATA and ATAPI devices
87device		ata
88device		atadisk		# ATA disk drives
89device		atapicd		# ATAPI CDROM drives
90#device		atapifd		# ATAPI floppy drives
91#device		atapist		# ATAPI tape drives
92
93# SCSI peripherals
94device		scbus		# SCSI bus (required for SCSI)
95device		da		# Direct Access (disks)
96device		sa		# Sequential Access (tape etc)
97device		cd		# CD
98device		pass		# Passthrough device (direct SCSI access)
99
100# syscons is the default console driver, resembling an SCO console
101device		sc
102device		kbdmux
103options 	SC_OFWFB	# OFW frame buffer
104options 	SC_DFLT_FONT	# compile font in
105makeoptions	SC_DFLT_FONT=cp437
106
107# Serial (COM) ports
108device		scc
109device		uart
110
111# PCI Ethernet NICs that use the common MII bus controller code.
112device		miibus		# MII bus support
113device		bge		# Broadcom BCM570xx Gigabit Ethernet
114device		bm		# Apple BMAC Ethernet
115device		gem		# Sun GEM/Sun ERI/Apple GMAC
116device		dc		# DEC/Intel 21143 and various workalikes
117device		fxp		# Intel EtherExpress PRO/100B (82557, 82558)
118
119# Pseudo devices.
120device		loop		# Network loopback
121device		random		# Entropy device
122device		ether		# Ethernet support
123device		tun		# Packet tunnel.
124device		pty		# BSD-style compatibility pseudo ttys
125device		md		# Memory "disks"
126device		ofwd		# Open Firmware disks
127device		gif		# IPv6 and IPv4 tunneling
128device		faith		# IPv6-to-IPv4 relaying/(translation)
129
130# The `bpf' device enables the Berkeley Packet Filter.
131# Be aware of the administrative consequences of enabling this!
132# Note that 'bpf' is required for DHCP.
133device		bpf		#Berkeley packet filter
134
135# USB support
136device		uhci		# UHCI PCI->USB interface
137device		ohci		# OHCI PCI->USB interface
138device		ehci		# EHCI PCI->USB interface
139device		usb		# USB Bus (required)
140device		uhid		# "Human Interface Devices"
141device		ukbd		# Keyboard
142options 	KBD_INSTALL_CDEV # install a CDEV entry in /dev
143device		ulpt		# Printer
144device		umass		# Disks/Mass storage - Requires scbus and da0
145device		ums		# Mouse
146device		urio		# Diamond Rio 500 MP3 player
147# USB Ethernet
148device		aue		# ADMtek USB Ethernet
149device		axe		# ASIX Electronics USB Ethernet
150device		cdce		# Generic USB over Ethernet
151device		cue		# CATC USB Ethernet
152device		kue		# Kawasaki LSI USB Ethernet
153
154# FireWire support
155device		firewire	# FireWire bus code
156device		sbp		# SCSI over FireWire (Requires scbus and da)
157device		fwe		# Ethernet over FireWire (non-standard!)
158
159# Misc
160device		powermac_nvram	# Open Firmware configuration NVRAM
161
162# ADB support
163device		adb
164device		cuda
165device		pmu
166
167# Powermac I2C support
168device		iicbus		# I2C bus code
169device		kiic		# Keywest I2C
170
171options 	KTR
172options 	KTR_COMPILE=0xffffffff
173#options 	KTR_MASK=KTR_SIG
174options 	KTR_VERBOSE
175