xref: /freebsd/sys/powerpc/booke/locore.S (revision 7aa65846327fe5bc7e5961c2f7fd0c61f2ec0b01)
1/*-
2 * Copyright (C) 2007-2009 Semihalf, Rafal Jaworowski <raj@semihalf.com>
3 * Copyright (C) 2006 Semihalf, Marian Balakowicz <m8@semihalf.com>
4 * All rights reserved.
5 *
6 * Redistribution and use in source and binary forms, with or without
7 * modification, are permitted provided that the following conditions
8 * are met:
9 * 1. Redistributions of source code must retain the above copyright
10 *    notice, this list of conditions and the following disclaimer.
11 * 2. Redistributions in binary form must reproduce the above copyright
12 *    notice, this list of conditions and the following disclaimer in the
13 *    documentation and/or other materials provided with the distribution.
14 *
15 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
16 * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
17 * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
18 * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
19 * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED
20 * TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
21 * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
22 * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
23 * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
24 * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
25 *
26 * $FreeBSD$
27 */
28
29#include "assym.s"
30
31#include <machine/asm.h>
32#include <machine/hid.h>
33#include <machine/param.h>
34#include <machine/spr.h>
35#include <machine/pte.h>
36#include <machine/trap.h>
37#include <machine/vmparam.h>
38#include <machine/tlb.h>
39
40#define TMPSTACKSZ	16384
41
42	.text
43	.globl	btext
44btext:
45
46/*
47 * This symbol is here for the benefit of kvm_mkdb, and is supposed to
48 * mark the start of kernel text.
49 */
50	.globl	kernel_text
51kernel_text:
52
53/*
54 * Startup entry.  Note, this must be the first thing in the text segment!
55 */
56	.text
57	.globl	__start
58__start:
59
60/*
61 * Assumptions on the boot loader:
62 *  - system memory starts from physical address 0
63 *  - it's mapped by a single TBL1 entry
64 *  - TLB1 mapping is 1:1 pa to va
65 *  - kernel is loaded at 16MB boundary
66 *  - all PID registers are set to the same value
67 *  - CPU is running in AS=0
68 *
69 * Registers contents provided by the loader(8):
70 *	r1	: stack pointer
71 *	r3	: metadata pointer
72 *
73 * We rearrange the TLB1 layout as follows:
74 *  - find TLB1 entry we started in
75 *  - make sure it's protected, ivalidate other entries
76 *  - create temp entry in the second AS (make sure it's not TLB[1])
77 *  - switch to temp mapping
78 *  - map 16MB of RAM in TLB1[1]
79 *  - use AS=1, set EPN to KERNBASE and RPN to kernel load address
80 *  - switch to to TLB1[1] mapping
81 *  - invalidate temp mapping
82 *
83 * locore registers use:
84 *	r1	: stack pointer
85 *	r2	: trace pointer (AP only, for early diagnostics)
86 *	r3-r27	: scratch registers
87 *	r28	: temp TLB1 entry
88 *	r29	: initial TLB1 entry we started in
89 *	r30-r31	: arguments (metadata pointer)
90 */
91
92/*
93 * Keep arguments in r30 & r31 for later use.
94 */
95	mr	%r30, %r3
96	mr	%r31, %r4
97
98/*
99 * Initial cleanup
100 */
101	li	%r3, PSL_DE	/* Keep debug exceptions for CodeWarrior. */
102	mtmsr	%r3
103	isync
104
105	lis	%r3, HID0_E500_DEFAULT_SET@h
106	ori	%r3, %r3, HID0_E500_DEFAULT_SET@l
107	mtspr	SPR_HID0, %r3
108	isync
109	lis	%r3, HID1_E500_DEFAULT_SET@h
110	ori	%r3, %r3, HID1_E500_DEFAULT_SET@l
111	mtspr	SPR_HID1, %r3
112	isync
113
114	/* Invalidate all entries in TLB0 */
115	li	%r3, 0
116	bl	tlb_inval_all
117
118	cmpwi	%r30, 0
119	beq	done_mapping
120
121/*
122 * Locate the TLB1 entry that maps this code
123 */
124	bl	1f
1251:	mflr	%r3
126	bl	tlb1_find_current	/* the entry found is returned in r29 */
127
128	bl	tlb1_inval_all_but_current
129/*
130 * Create temporary mapping in AS=1 and switch to it
131 */
132	bl	tlb1_temp_mapping_as1
133
134	mfmsr	%r3
135	ori	%r3, %r3, (PSL_IS | PSL_DS)
136	bl	2f
1372:	mflr	%r4
138	addi	%r4, %r4, 20
139	mtspr	SPR_SRR0, %r4
140	mtspr	SPR_SRR1, %r3
141	rfi				/* Switch context */
142
143/*
144 * Invalidate initial entry
145 */
146	mr	%r3, %r29
147	bl	tlb1_inval_entry
148
149/*
150 * Setup final mapping in TLB1[1] and switch to it
151 */
152	/* Final kernel mapping, map in 16 MB of RAM */
153	lis	%r3, MAS0_TLBSEL1@h	/* Select TLB1 */
154	li	%r4, 0			/* Entry 0 */
155	rlwimi	%r3, %r4, 16, 12, 15
156	mtspr	SPR_MAS0, %r3
157	isync
158
159	li	%r3, (TLB_SIZE_16M << MAS1_TSIZE_SHIFT)@l
160	oris	%r3, %r3, (MAS1_VALID | MAS1_IPROT)@h
161	mtspr	SPR_MAS1, %r3		/* note TS was not filled, so it's TS=0 */
162	isync
163
164	lis	%r3, KERNBASE@h
165	ori	%r3, %r3, KERNBASE@l	/* EPN = KERNBASE */
166#ifdef SMP
167	ori	%r3, %r3, MAS2_M@l	/* WIMGE = 0b00100 */
168#endif
169	mtspr	SPR_MAS2, %r3
170	isync
171
172	/* Discover phys load address */
173	bl	3f
1743:	mflr	%r4			/* Use current address */
175	rlwinm	%r4, %r4, 0, 0, 7	/* 16MB alignment mask */
176	ori	%r4, %r4, (MAS3_SX | MAS3_SW | MAS3_SR)@l
177	mtspr	SPR_MAS3, %r4		/* Set RPN and protection */
178	isync
179	tlbwe
180	isync
181	msync
182
183	/* Switch to the above TLB1[1] mapping */
184	bl	4f
1854:	mflr	%r4
186	rlwinm	%r4, %r4, 0, 8, 31	/* Current offset from kernel load address */
187	rlwinm	%r3, %r3, 0, 0, 19
188	add	%r4, %r4, %r3		/* Convert to kernel virtual address */
189	addi	%r4, %r4, 36
190	li	%r3, PSL_DE		/* Note AS=0 */
191	mtspr   SPR_SRR0, %r4
192	mtspr   SPR_SRR1, %r3
193	rfi
194
195/*
196 * Invalidate temp mapping
197 */
198	mr	%r3, %r28
199	bl	tlb1_inval_entry
200
201done_mapping:
202
203/*
204 * Setup a temporary stack
205 */
206	lis	%r1, tmpstack@ha
207	addi	%r1, %r1, tmpstack@l
208	addi	%r1, %r1, (TMPSTACKSZ - 8)
209
210/*
211 * Initialise exception vector offsets
212 */
213	bl	ivor_setup
214
215/*
216 * Set up arguments and jump to system initialization code
217 */
218	mr	%r3, %r30
219	mr	%r4, %r31
220
221	/* Prepare e500 core */
222	bl	booke_init
223
224	/* Switch to thread0.td_kstack now */
225	mr	%r1, %r3
226	li	%r3, 0
227	stw	%r3, 0(%r1)
228
229	/* Machine independet part, does not return */
230	bl	mi_startup
231	/* NOT REACHED */
2325:	b	5b
233
234
235#ifdef SMP
236/************************************************************************/
237/* AP Boot page */
238/************************************************************************/
239	.text
240	.globl	__boot_page
241	.align	12
242__boot_page:
243	bl	1f
244
245	.globl	kernload_ap
246kernload_ap:
247	.long	0
248
249/*
250 * Initial configuration
251 */
2521:
253	/* Set HIDs */
254	lis	%r3, HID0_E500_DEFAULT_SET@h
255	ori	%r3, %r3, HID0_E500_DEFAULT_SET@l
256	mtspr	SPR_HID0, %r3
257	isync
258	lis	%r3, HID1_E500_DEFAULT_SET@h
259	ori	%r3, %r3, HID1_E500_DEFAULT_SET@l
260	mtspr	SPR_HID1, %r3
261	isync
262
263	/* Enable branch prediction */
264	li	%r3, BUCSR_BPEN
265	mtspr	SPR_BUCSR, %r3
266	isync
267
268	/* Invalidate all entries in TLB0 */
269	li	%r3, 0
270	bl	tlb_inval_all
271
272/*
273 * Find TLB1 entry which is translating us now
274 */
275	bl	2f
2762:	mflr	%r3
277	bl	tlb1_find_current	/* the entry number found is in r29 */
278
279	bl	tlb1_inval_all_but_current
280/*
281 * Create temporary translation in AS=1 and switch to it
282 */
283	bl	tlb1_temp_mapping_as1
284
285	mfmsr	%r3
286	ori	%r3, %r3, (PSL_IS | PSL_DS)
287	bl	3f
2883:	mflr	%r4
289	addi	%r4, %r4, 20
290	mtspr	SPR_SRR0, %r4
291	mtspr	SPR_SRR1, %r3
292	rfi				/* Switch context */
293
294/*
295 * Invalidate initial entry
296 */
297	mr	%r3, %r29
298	bl	tlb1_inval_entry
299
300/*
301 * Setup final mapping in TLB1[1] and switch to it
302 */
303	/* Final kernel mapping, map in 16 MB of RAM */
304	lis	%r3, MAS0_TLBSEL1@h	/* Select TLB1 */
305	li	%r4, 0			/* Entry 0 */
306	rlwimi	%r3, %r4, 16, 4, 15
307	mtspr	SPR_MAS0, %r3
308	isync
309
310	li	%r3, (TLB_SIZE_16M << MAS1_TSIZE_SHIFT)@l
311	oris	%r3, %r3, (MAS1_VALID | MAS1_IPROT)@h
312	mtspr	SPR_MAS1, %r3		/* note TS was not filled, so it's TS=0 */
313	isync
314
315	lis	%r3, KERNBASE@h
316	ori	%r3, %r3, KERNBASE@l	/* EPN = KERNBASE */
317	ori	%r3, %r3, MAS2_M@l	/* WIMGE = 0b00100 */
318	mtspr	SPR_MAS2, %r3
319	isync
320
321	/* Retrieve kernel load [physical] address from kernload_ap */
322	bl	4f
3234:	mflr	%r3
324	rlwinm	%r3, %r3, 0, 0, 19
325	lis	%r4, kernload_ap@h
326	ori	%r4, %r4, kernload_ap@l
327	lis	%r5, __boot_page@h
328	ori	%r5, %r5, __boot_page@l
329	sub	%r4, %r4, %r5	/* offset of kernload_ap within __boot_page */
330	lwzx	%r3, %r4, %r3
331
332	/* Set RPN and protection */
333	ori	%r3, %r3, (MAS3_SX | MAS3_SW | MAS3_SR)@l
334	mtspr	SPR_MAS3, %r3
335	isync
336	tlbwe
337	isync
338	msync
339
340	/* Switch to the final mapping */
341	bl	5f
3425:	mflr	%r3
343	rlwinm	%r3, %r3, 0, 0xfff	/* Offset from boot page start */
344	add	%r3, %r3, %r5		/* Make this virtual address */
345	addi	%r3, %r3, 32
346	li	%r4, 0			/* Note AS=0 */
347	mtspr	SPR_SRR0, %r3
348	mtspr	SPR_SRR1, %r4
349	rfi
350
351/*
352 * At this point we're running at virtual addresses KERNBASE and beyond so
353 * it's allowed to directly access all locations the kernel was linked
354 * against.
355 */
356
357/*
358 * Invalidate temp mapping
359 */
360	mr	%r3, %r28
361	bl	tlb1_inval_entry
362
363/*
364 * Setup a temporary stack
365 */
366	lis	%r1, tmpstack@ha
367	addi	%r1, %r1, tmpstack@l
368	addi	%r1, %r1, (TMPSTACKSZ - 8)
369
370/*
371 * Initialise exception vector offsets
372 */
373	bl	ivor_setup
374
375	/*
376	 * Assign our pcpu instance
377	 */
378	lis	%r3, ap_pcpu@h
379	ori	%r3, %r3, ap_pcpu@l
380	lwz	%r3, 0(%r3)
381	mtsprg0	%r3
382
383	bl	pmap_bootstrap_ap
384
385	bl	cpudep_ap_bootstrap
386	/* Switch to the idle thread's kstack */
387	mr	%r1, %r3
388
389	bl	machdep_ap_bootstrap
390
391	/* NOT REACHED */
3926:	b	6b
393#endif /* SMP */
394
395/*
396 * Invalidate all entries in the given TLB.
397 *
398 * r3	TLBSEL
399 */
400tlb_inval_all:
401	rlwinm	%r3, %r3, 3, 0x18	/* TLBSEL */
402	ori	%r3, %r3, 0x4		/* INVALL */
403	tlbivax	0, %r3
404	isync
405	msync
406
407	tlbsync
408	msync
409	blr
410
411/*
412 * expects address to look up in r3, returns entry number in r29
413 *
414 * FIXME: the hidden assumption is we are now running in AS=0, but we should
415 * retrieve actual AS from MSR[IS|DS] and put it in MAS6[SAS]
416 */
417tlb1_find_current:
418	mfspr	%r17, SPR_PID0
419	slwi	%r17, %r17, MAS6_SPID0_SHIFT
420	mtspr	SPR_MAS6, %r17
421	isync
422	tlbsx	0, %r3
423	mfspr	%r17, SPR_MAS0
424	rlwinm	%r29, %r17, 16, 20, 31		/* MAS0[ESEL] -> r29 */
425
426	/* Make sure we have IPROT set on the entry */
427	mfspr	%r17, SPR_MAS1
428	oris	%r17, %r17, MAS1_IPROT@h
429	mtspr	SPR_MAS1, %r17
430	isync
431	tlbwe
432	isync
433	msync
434	blr
435
436/*
437 * Invalidates a single entry in TLB1.
438 *
439 * r3		ESEL
440 * r4-r5	scratched
441 */
442tlb1_inval_entry:
443	lis	%r4, MAS0_TLBSEL1@h	/* Select TLB1 */
444	rlwimi	%r4, %r3, 16, 12, 15	/* Select our entry */
445	mtspr	SPR_MAS0, %r4
446	isync
447	tlbre
448	li	%r5, 0			/* MAS1[V] = 0 */
449	mtspr	SPR_MAS1, %r5
450	isync
451	tlbwe
452	isync
453	msync
454	blr
455
456/*
457 * r29		current entry number
458 * r28		returned temp entry
459 * r3-r5	scratched
460 */
461tlb1_temp_mapping_as1:
462	/* Read our current translation */
463	lis	%r3, MAS0_TLBSEL1@h	/* Select TLB1 */
464	rlwimi	%r3, %r29, 16, 12, 15	/* Select our current entry */
465	mtspr	SPR_MAS0, %r3
466	isync
467	tlbre
468
469	/*
470	 * Prepare and write temp entry
471	 *
472	 * FIXME this is not robust against overflow i.e. when the current
473	 * entry is the last in TLB1
474	 */
475	lis	%r3, MAS0_TLBSEL1@h	/* Select TLB1 */
476	addi	%r28, %r29, 1		/* Use next entry. */
477	rlwimi	%r3, %r28, 16, 12, 15	/* Select temp entry */
478	mtspr	SPR_MAS0, %r3
479	isync
480	mfspr	%r5, SPR_MAS1
481	li	%r4, 1			/* AS=1 */
482	rlwimi	%r5, %r4, 12, 19, 19
483	li	%r4, 0			/* Global mapping, TID=0 */
484	rlwimi	%r5, %r4, 16, 8, 15
485	oris	%r5, %r5, (MAS1_VALID | MAS1_IPROT)@h
486	mtspr	SPR_MAS1, %r5
487	isync
488	tlbwe
489	isync
490	msync
491	blr
492
493/*
494 * Loops over TLB1, invalidates all entries skipping the one which currently
495 * maps this code.
496 *
497 * r29		current entry
498 * r3-r5	scratched
499 */
500tlb1_inval_all_but_current:
501	mr	%r6, %r3
502	mfspr	%r3, SPR_TLB1CFG	/* Get number of entries */
503	andi.	%r3, %r3, TLBCFG_NENTRY_MASK@l
504	li	%r4, 0			/* Start from Entry 0 */
5051:	lis	%r5, MAS0_TLBSEL1@h
506	rlwimi	%r5, %r4, 16, 12, 15
507	mtspr	SPR_MAS0, %r5
508	isync
509	tlbre
510	mfspr	%r5, SPR_MAS1
511	cmpw	%r4, %r29		/* our current entry? */
512	beq	2f
513	rlwinm	%r5, %r5, 0, 2, 31	/* clear VALID and IPROT bits */
514	mtspr	SPR_MAS1, %r5
515	isync
516	tlbwe
517	isync
518	msync
5192:	addi	%r4, %r4, 1
520	cmpw	%r4, %r3		/* Check if this is the last entry */
521	bne	1b
522	blr
523
524#ifdef SMP
525__boot_page_padding:
526	/*
527	 * Boot page needs to be exactly 4K, with the last word of this page
528	 * acting as the reset vector, so we need to stuff the remainder.
529	 * Upon release from holdoff CPU fetches the last word of the boot
530	 * page.
531	 */
532	.space	4092 - (__boot_page_padding - __boot_page)
533	b	__boot_page
534#endif /* SMP */
535
536/************************************************************************/
537/* locore subroutines */
538/************************************************************************/
539
540ivor_setup:
541	/* Set base address of interrupt handler routines */
542	lis	%r3, interrupt_vector_base@h
543	mtspr	SPR_IVPR, %r3
544
545	/* Assign interrupt handler routines offsets */
546	li	%r3, int_critical_input@l
547	mtspr	SPR_IVOR0, %r3
548	li	%r3, int_machine_check@l
549	mtspr	SPR_IVOR1, %r3
550	li	%r3, int_data_storage@l
551	mtspr	SPR_IVOR2, %r3
552	li	%r3, int_instr_storage@l
553	mtspr	SPR_IVOR3, %r3
554	li	%r3, int_external_input@l
555	mtspr	SPR_IVOR4, %r3
556	li	%r3, int_alignment@l
557	mtspr	SPR_IVOR5, %r3
558	li	%r3, int_program@l
559	mtspr	SPR_IVOR6, %r3
560	li	%r3, int_syscall@l
561	mtspr	SPR_IVOR8, %r3
562	li	%r3, int_decrementer@l
563	mtspr	SPR_IVOR10, %r3
564	li	%r3, int_fixed_interval_timer@l
565	mtspr	SPR_IVOR11, %r3
566	li	%r3, int_watchdog@l
567	mtspr	SPR_IVOR12, %r3
568	li	%r3, int_data_tlb_error@l
569	mtspr	SPR_IVOR13, %r3
570	li	%r3, int_inst_tlb_error@l
571	mtspr	SPR_IVOR14, %r3
572	li	%r3, int_debug@l
573	mtspr	SPR_IVOR15, %r3
574	blr
575
576/*
577 * void tid_flush(tlbtid_t tid);
578 *
579 * Invalidate all TLB0 entries which match the given TID. Note this is
580 * dedicated for cases when invalidation(s) should NOT be propagated to other
581 * CPUs.
582 *
583 * Global vars tlb0_ways, tlb0_entries_per_way are assumed to have been set up
584 * correctly (by tlb0_get_tlbconf()).
585 *
586 */
587ENTRY(tid_flush)
588	cmpwi	%r3, TID_KERNEL
589	beq	tid_flush_end	/* don't evict kernel translations */
590
591	/* Number of TLB0 ways */
592	lis	%r4, tlb0_ways@h
593	ori	%r4, %r4, tlb0_ways@l
594	lwz	%r4, 0(%r4)
595
596	/* Number of entries / way */
597	lis	%r5, tlb0_entries_per_way@h
598	ori	%r5, %r5, tlb0_entries_per_way@l
599	lwz	%r5, 0(%r5)
600
601	/* Disable interrupts */
602	mfmsr	%r10
603	wrteei	0
604
605	li	%r6, 0		/* ways counter */
606loop_ways:
607	li	%r7, 0		/* entries [per way] counter */
608loop_entries:
609	/* Select TLB0 and ESEL (way) */
610	lis	%r8, MAS0_TLBSEL0@h
611	rlwimi	%r8, %r6, 16, 14, 15
612	mtspr	SPR_MAS0, %r8
613	isync
614
615	/* Select EPN (entry within the way) */
616	rlwinm	%r8, %r7, 12, 13, 19
617	mtspr	SPR_MAS2, %r8
618	isync
619	tlbre
620
621	/* Check if valid entry */
622	mfspr	%r8, SPR_MAS1
623	andis.	%r9, %r8, MAS1_VALID@h
624	beq	next_entry	/* invalid entry */
625
626	/* Check if this is our TID */
627	rlwinm	%r9, %r8, 16, 24, 31
628
629	cmplw	%r9, %r3
630	bne	next_entry	/* not our TID */
631
632	/* Clear VALID bit */
633	rlwinm	%r8, %r8, 0, 1, 31
634	mtspr	SPR_MAS1, %r8
635	isync
636	tlbwe
637	isync
638	msync
639
640next_entry:
641	addi	%r7, %r7, 1
642	cmpw	%r7, %r5
643	bne	loop_entries
644
645	/* Next way */
646	addi	%r6, %r6, 1
647	cmpw	%r6, %r4
648	bne	loop_ways
649
650	/* Restore MSR (possibly re-enable interrupts) */
651	mtmsr	%r10
652	isync
653
654tid_flush_end:
655	blr
656
657/*
658 * Cache disable/enable/inval sequences according
659 * to section 2.16 of E500CORE RM.
660 */
661ENTRY(dcache_inval)
662	/* Invalidate d-cache */
663	mfspr	%r3, SPR_L1CSR0
664	ori	%r3, %r3, (L1CSR0_DCFI | L1CSR0_DCLFR)@l
665	msync
666	isync
667	mtspr	SPR_L1CSR0, %r3
668	isync
6691:	mfspr	%r3, SPR_L1CSR0
670	andi.	%r3, %r3, L1CSR0_DCFI
671	bne	1b
672	blr
673
674ENTRY(dcache_disable)
675	/* Disable d-cache */
676	mfspr	%r3, SPR_L1CSR0
677	li	%r4, L1CSR0_DCE@l
678	not	%r4, %r4
679	and	%r3, %r3, %r4
680	msync
681	isync
682	mtspr	SPR_L1CSR0, %r3
683	isync
684	blr
685
686ENTRY(dcache_enable)
687	/* Enable d-cache */
688	mfspr	%r3, SPR_L1CSR0
689	oris	%r3, %r3, (L1CSR0_DCPE | L1CSR0_DCE)@h
690	ori	%r3, %r3, (L1CSR0_DCPE | L1CSR0_DCE)@l
691	msync
692	isync
693	mtspr	SPR_L1CSR0, %r3
694	isync
695	blr
696
697ENTRY(icache_inval)
698	/* Invalidate i-cache */
699	mfspr	%r3, SPR_L1CSR1
700	ori	%r3, %r3, (L1CSR1_ICFI | L1CSR1_ICLFR)@l
701	isync
702	mtspr	SPR_L1CSR1, %r3
703	isync
7041:	mfspr	%r3, SPR_L1CSR1
705	andi.	%r3, %r3, L1CSR1_ICFI
706	bne	1b
707	blr
708
709ENTRY(icache_disable)
710	/* Disable i-cache */
711	mfspr	%r3, SPR_L1CSR1
712	li	%r4, L1CSR1_ICE@l
713	not	%r4, %r4
714	and	%r3, %r3, %r4
715	isync
716	mtspr	SPR_L1CSR1, %r3
717	isync
718	blr
719
720ENTRY(icache_enable)
721	/* Enable i-cache */
722	mfspr	%r3, SPR_L1CSR1
723	oris	%r3, %r3, (L1CSR1_ICPE | L1CSR1_ICE)@h
724	ori	%r3, %r3, (L1CSR1_ICPE | L1CSR1_ICE)@l
725	isync
726	mtspr	SPR_L1CSR1, %r3
727	isync
728	blr
729
730/*
731 * int setfault()
732 *
733 * Similar to setjmp to setup for handling faults on accesses to user memory.
734 * Any routine using this may only call bcopy, either the form below,
735 * or the (currently used) C code optimized, so it doesn't use any non-volatile
736 * registers.
737 */
738	.globl	setfault
739setfault:
740	mflr	%r0
741	mfsprg0	%r4
742	lwz	%r4, PC_CURTHREAD(%r4)
743	lwz	%r4, TD_PCB(%r4)
744	stw	%r3, PCB_ONFAULT(%r4)
745	mfcr	%r10
746	mfctr	%r11
747	mfxer	%r12
748	stw	%r0, 0(%r3)
749	stw	%r1, 4(%r3)
750	stw	%r2, 8(%r3)
751	stmw	%r10, 12(%r3)		/* store CR, CTR, XER, [r13 .. r31] */
752	li	%r3, 0			/* return FALSE */
753	blr
754
755/************************************************************************/
756/* Data section								*/
757/************************************************************************/
758	.data
759	.align	4
760tmpstack:
761	.space	TMPSTACKSZ
762
763/*
764 * Compiled KERNBASE locations
765 */
766	.globl	kernbase
767	.set	kernbase, KERNBASE
768
769/*
770 * Globals
771 */
772#define	INTRCNT_COUNT	256		/* max(HROWPIC_IRQMAX,OPENPIC_IRQMAX) */
773
774GLOBAL(intrnames)
775	.space	INTRCNT_COUNT * (MAXCOMLEN + 1) * 2
776GLOBAL(sintrnames)
777	.long	INTRCNT_COUNT * (MAXCOMLEN + 1) * 2
778
779	.align 4
780GLOBAL(intrcnt)
781	.space	INTRCNT_COUNT * 4 * 2
782GLOBAL(sintrcnt)
783	.long	INTRCNT_COUNT * 4 * 2
784
785#include <powerpc/booke/trap_subr.S>
786