xref: /freebsd/sys/powerpc/amigaone/cpld_a1222.c (revision 7ef62cebc2f965b0f640263e179276928885e33d)
1 /*-
2  * Copyright (c) 2020 Justin Hibbits
3  *
4  * Redistribution and use in source and binary forms, with or without
5  * modification, are permitted provided that the following conditions
6  * are met:
7  *
8  * 1. Redistributions of source code must retain the above copyright
9  *    notice, this list of conditions and the following disclaimer.
10  * 2. Redistributions in binary form must reproduce the above copyright
11  *    notice, this list of conditions and the following disclaimer in the
12  *    documentation and/or other materials provided with the distribution.
13  *
14  * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
15  * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
16  * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
17  * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
18  * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
19  * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
20  * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
21  * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
22  * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
23  * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
24  */
25 
26 #include <sys/cdefs.h>
27 __FBSDID("$FreeBSD$");
28 
29 #include <sys/param.h>
30 #include <sys/systm.h>
31 #include <sys/conf.h>
32 #include <sys/kernel.h>
33 #include <sys/bus.h>
34 #include <sys/limits.h>
35 #include <sys/module.h>
36 #include <sys/malloc.h>
37 #include <sys/mutex.h>
38 #include <sys/rman.h>
39 #include <sys/sysctl.h>
40 
41 #include <machine/bus.h>
42 
43 #include <dev/ofw/ofw_bus.h>
44 #include <dev/ofw/ofw_bus_subr.h>
45 
46 #include <sys/kdb.h>
47 
48 #include "cpld.h"
49 
50 /*
51  * A driver for the AmigaOne A1222 "Tabor" Main CPLD.
52  *
53  * The main CPLD is the interface between the CPU and the GPIO CPLD.
54  * Communication with the GPIO CPLD is over the main CPLD's mailbox interface,
55  * along with the dual-port RAM on the CPLD.
56  *
57  * Only one process can open the CPLD character device at a time.  The driver
58  * enforces this to simplify the communication protocol.
59  */
60 
61 /* Resource access addresses. */
62 #define	CPLD_MEM_ADDR_H		0x00
63 #define	CPLD_MEM_ADDR_L		0x01
64 #define	CPLD_MEM_DATA		0x80
65 
66 #define	CPLD_MAX_DRAM_WORDS	0x800
67 
68 /* CPLD Registers. */
69 #define	CPLD_REG_SIG1		0x00
70 #define	CPLD_REG_SIG2		0x01
71 #define	CPLD_REG_HWREV		0x02
72 #define	CPLD_REG_CPLDREV	0x03
73 #define	CPLD_REG_MBC2X		0x04
74 #define	CPLD_REG_MBX2C		0x05
75 #define	CPLD_REG_FAN1_TACHO_U	0x10
76 #define	CPLD_REG_FAN1_TACHO_L	0x11
77 #define	CPLD_REG_FAN2_TACHO_U	0x12
78 #define	CPLD_REG_FAN2_TACHO_L	0x13
79 #define	CPLD_REG_FAN3_TACHO_U	0x14
80 #define	CPLD_REG_FAN3_TACHO_L	0x15
81 #define	CPLD_REG_DATE_UU	0x20
82 #define	CPLD_REG_DATE_UL	0x21
83 #define	CPLD_REG_DATE_LU	0x22
84 #define	CPLD_REG_DATE_LL	0x23
85 #define	CPLD_REG_TIME_UU	0x24
86 #define	CPLD_REG_TIME_UL	0x25
87 #define	CPLD_REG_TIME_LU	0x26
88 #define	CPLD_REG_TIME_LL	0x27
89 #define	CPLD_REG_SCR1		0x5c
90 #define	CPLD_REG_SCR2		0x6a
91 #define	CPLD_REG_RAM		0x80
92 
93 struct cpld_softc {
94 	device_t	 sc_dev;
95 	struct resource	*sc_mem;
96 	struct cdev	*sc_cdev;
97 	struct mtx	 sc_mutex;
98 	bool		 sc_isopen;
99 };
100 
101 static d_open_t		cpld_open;
102 static d_close_t	cpld_close;
103 static d_ioctl_t	cpld_ioctl;
104 
105 static struct cdevsw cpld_cdevsw = {
106 	.d_version =	D_VERSION,
107 	.d_open =	cpld_open,
108 	.d_close =	cpld_close,
109 	.d_ioctl =	cpld_ioctl,
110 	.d_name =	"nvram",
111 };
112 
113 static device_probe_t	cpld_probe;
114 static device_attach_t	cpld_attach;
115 static int		cpld_fan_sysctl(SYSCTL_HANDLER_ARGS);
116 
117 static device_method_t cpld_methods[] = {
118 	DEVMETHOD(device_probe,		cpld_probe),
119 	DEVMETHOD(device_attach,	cpld_attach),
120 
121 	DEVMETHOD_END
122 };
123 
124 static driver_t cpld_driver = {
125 	"cpld",
126 	cpld_methods,
127 	sizeof(struct cpld_softc)
128 };
129 
130 DRIVER_MODULE(cpld, lbc, cpld_driver, 0, 0);
131 
132 static void
133 cpld_write(struct cpld_softc *sc, int addr, int data)
134 {
135 	if (addr >= CPLD_REG_RAM) {
136 		bus_write_1(sc->sc_mem, CPLD_MEM_ADDR_H, addr);
137 		bus_write_1(sc->sc_mem, CPLD_MEM_ADDR_L, addr);
138 	} else
139 		bus_write_1(sc->sc_mem, CPLD_MEM_ADDR_H, addr);
140 	bus_write_1(sc->sc_mem, CPLD_MEM_DATA, data);
141 }
142 
143 static int
144 cpld_read(struct cpld_softc *sc, int addr)
145 {
146 	if (addr >= CPLD_REG_RAM) {
147 		bus_write_1(sc->sc_mem, CPLD_MEM_ADDR_H, addr);
148 		bus_write_1(sc->sc_mem, CPLD_MEM_ADDR_L, addr);
149 	} else
150 		bus_write_1(sc->sc_mem, CPLD_MEM_ADDR_H, addr);
151 
152 	return (bus_read_1(sc->sc_mem, CPLD_MEM_DATA));
153 }
154 
155 /*
156  * This is only to read a register that's split into two 8-bit registers.
157  * Dual-port RAM is not accepted for this purpose.
158  */
159 static int
160 cpld_read_pair(struct cpld_softc *sc, int addr)
161 {
162 	int tmp;
163 
164 	KASSERT(addr <= 0xff, ("Invalid register-pair base address %x.", addr));
165 	bus_write_1(sc->sc_mem, CPLD_MEM_ADDR_H, addr);
166 	tmp = bus_read_1(sc->sc_mem, CPLD_MEM_DATA) << 8;
167 
168 	bus_write_1(sc->sc_mem, CPLD_MEM_ADDR_H, addr + 1);
169 	tmp |= bus_read_1(sc->sc_mem, CPLD_MEM_DATA);
170 
171 	return (tmp);
172 }
173 
174 static int
175 cpld_probe(device_t dev)
176 {
177 	if (!ofw_bus_is_compatible(dev, "aeon,tabor-cpld"))
178 		return (ENXIO);
179 
180 	device_set_desc(dev, "AmigaOne Tabor CPLD");
181 
182 	return (BUS_PROBE_GENERIC);
183 }
184 
185 static int
186 cpld_attach(device_t dev)
187 {
188 	struct make_dev_args mda;
189 	struct cpld_softc *sc;
190 	int rid;
191 	int date, time, tmp;
192 	int err;
193 	struct sysctl_ctx_list *ctx;
194 	struct sysctl_oid *tree;
195 
196 	sc = device_get_softc(dev);
197 	sc->sc_dev = dev;
198 
199 	rid = 0;
200 	sc->sc_mem = bus_alloc_resource_any(dev, SYS_RES_MEMORY, &rid,
201 	    RF_ACTIVE|RF_SHAREABLE);
202 	if (sc->sc_mem == NULL) {
203 		device_printf(dev, "Unable to allocate memory resource.\n");
204 		return (ENXIO);
205 	}
206 	mtx_init(&sc->sc_mutex, "cpld", NULL, MTX_DEF);
207 
208 	if (bootverbose) {
209 		date = (cpld_read_pair(sc, CPLD_REG_DATE_UU) << 16) |
210 		    cpld_read_pair(sc, CPLD_REG_DATE_LU);
211 		time = (cpld_read_pair(sc, CPLD_REG_TIME_UU) << 16) |
212 		    cpld_read_pair(sc, CPLD_REG_TIME_LU);
213 
214 		device_printf(dev, "Build date: %04x-%02x-%02x\n",
215 		    (date >> 16) & 0xffff, (date >> 8) & 0xff, date & 0xff);
216 #if 0
217 		/* Build time is nonsense on tested system. */
218 		device_printf(dev, "Build time: %02x:%02x:%02x\n",
219 		    (time >> 16) & 0xff, (time >> 8) & 0xff, time & 0xff);
220 #endif
221 	}
222 
223 	tmp = cpld_read(sc, CPLD_REG_HWREV);
224 	device_printf(dev, "Hardware revision: %d\n", tmp);
225 
226 	ctx = device_get_sysctl_ctx(dev);
227 	tree = device_get_sysctl_tree(dev);
228 
229 	SYSCTL_ADD_PROC(ctx, SYSCTL_CHILDREN(tree), OID_AUTO,
230 	    "cpu_fan", CTLTYPE_INT | CTLFLAG_RD | CTLFLAG_MPSAFE, sc,
231 	    CPLD_REG_FAN1_TACHO_U, cpld_fan_sysctl, "I",
232 	    "CPU Fan speed in RPM");
233 
234 	SYSCTL_ADD_PROC(ctx, SYSCTL_CHILDREN(tree), OID_AUTO,
235 	    "case_1_fan", CTLTYPE_INT | CTLFLAG_RD | CTLFLAG_MPSAFE, sc,
236 	    CPLD_REG_FAN2_TACHO_U, cpld_fan_sysctl, "I",
237 	    "Case fan 1 speed in RPM");
238 
239 	SYSCTL_ADD_PROC(ctx, SYSCTL_CHILDREN(tree), OID_AUTO,
240 	    "case_2_fan", CTLTYPE_INT | CTLFLAG_RD | CTLFLAG_MPSAFE, sc,
241 	    CPLD_REG_FAN3_TACHO_U, cpld_fan_sysctl, "I",
242 	    "Case fan 2 speed in RPM");
243 
244 	make_dev_args_init(&mda);
245 	mda.mda_flags =  MAKEDEV_CHECKNAME;
246 	mda.mda_devsw = &cpld_cdevsw;
247 	mda.mda_uid = UID_ROOT;
248 	mda.mda_gid = GID_WHEEL;
249 	mda.mda_mode = 0660;
250 	err = make_dev_s(&mda, &sc->sc_cdev, "cpld");
251 	if (err != 0) {
252 		device_printf(dev, "Error creating character device: %d\n", err);
253 		device_printf(dev, "Only sysctl interfaces will be available.\n");
254 	}
255 
256 	return (0);
257 }
258 
259 static int
260 cpld_fan_sysctl(SYSCTL_HANDLER_ARGS)
261 {
262 	struct cpld_softc *sc;
263 	int error, old, rpm;
264 	int fan_reg;
265 
266 	sc = arg1;
267 	fan_reg = arg2;
268 	mtx_lock(&sc->sc_mutex);
269 	/* Read until we get some level of read stability. */
270 	rpm = cpld_read(sc, fan_reg);
271 	do {
272 		old = rpm;
273 		rpm = cpld_read_pair(sc, fan_reg);
274 	} while (abs(rpm - old) > 10);
275 	mtx_unlock(&sc->sc_mutex);
276 
277 	/* Convert RPS->RPM. */
278 	rpm *= 60;
279 	error = sysctl_handle_int(oidp, &rpm, 0, req);
280 
281 	return (error);
282 }
283 
284 static int
285 cpld_open(struct cdev *dev, int flags, int fmt, struct thread *td)
286 {
287 	struct cpld_softc *sc = dev->si_drv1;
288 
289 	if (sc->sc_isopen)
290 		return (EBUSY);
291 	sc->sc_isopen = 1;
292 	return (0);
293 }
294 
295 static int
296 cpld_close(struct cdev *dev, int fflag, int devtype, struct thread *td)
297 {
298 	struct cpld_softc *sc = dev->si_drv1;
299 
300 	sc->sc_isopen = 0;
301 	return (0);
302 }
303 
304 /*
305  * Send a command over the CPLD to the other side.
306  *
307  * This will first copy the data into the dual-port RAM, then signal the other
308  * side by writing to the mailbox.
309  */
310 static int
311 cpld_send(device_t dev, struct cpld_cmd_data *d)
312 {
313 	struct cpld_softc *sc;
314 	uint16_t *word;
315 	int i;
316 
317 	if (d->cmd > USHRT_MAX)
318 		return (EINVAL);
319 
320 	sc = device_get_softc(dev);
321 
322 	mtx_lock(&sc->sc_mutex);
323 	for (i = 0, word = d->words; i < d->len; i++, word++) {
324 		if (i == 0)
325 			cpld_write(sc, CPLD_REG_RAM + d->offset, *word);
326 		else
327 			bus_write_4(sc->sc_mem, CPLD_MEM_DATA, *word);
328 	}
329 
330 	cpld_write(sc, CPLD_REG_MBC2X, d->cmd);
331 	mtx_unlock(&sc->sc_mutex);
332 
333 	return (0);
334 }
335 
336 static int
337 cpld_recv(device_t dev, struct cpld_cmd_data *d)
338 {
339 	struct cpld_softc *sc;
340 	uint16_t *word;
341 	int i;
342 
343 	sc = device_get_softc(dev);
344 
345 	mtx_lock(&sc->sc_mutex);
346 	d->cmd = cpld_read(sc, CPLD_REG_MBX2C);
347 
348 	for (i = 0, word = d->words; i < d->len; i++, word++) {
349 		if (i == 0)
350 			*word = cpld_read(sc, CPLD_REG_RAM + d->offset);
351 		else
352 			*word = bus_read_4(sc->sc_mem, CPLD_MEM_DATA);
353 	}
354 	mtx_unlock(&sc->sc_mutex);
355 
356 	return (0);
357 }
358 
359 static int
360 cpld_ioctl(struct cdev *dev, u_long cmd, caddr_t data, int fflag,
361     struct thread *td)
362 {
363 	struct cpld_softc *sc;
364 	struct cpld_cmd_data *d;
365 	void *xfer_data, *tmp;
366 	int err;
367 
368 	sc = dev->si_drv1;
369 
370 	err = 0;
371 	d = (struct cpld_cmd_data *)data;
372 	if (d->len + d->offset > CPLD_MAX_DRAM_WORDS) {
373 		return (EINVAL);
374 	}
375 	xfer_data = malloc(d->len * sizeof(uint16_t), M_TEMP, M_WAITOK);
376 
377 	switch (cmd) {
378 	case IOCCPLDSEND:
379 		err = copyin(d->words, xfer_data, d->len * sizeof(uint16_t));
380 		d->words = xfer_data;
381 		if (err == 0)
382 			err = cpld_send(sc->sc_dev, d);
383 		break;
384 	case IOCCPLDRECV:
385 		tmp = d->words;
386 		d->words = xfer_data;
387 		err = cpld_recv(sc->sc_dev, d);
388 		d->words = tmp;
389 		if (err == 0)
390 			err = copyout(xfer_data, d->words,
391 			    d->len * sizeof(uint16_t));
392 		break;
393 	default:
394 		err = ENOTTY;
395 		break;
396 	}
397 	free(xfer_data, M_TEMP);
398 
399 	return (err);
400 }
401