1 /*- 2 * SPDX-License-Identifier: BSD-2-Clause-FreeBSD 3 * 4 * Copyright (c) 2008 Marcel Moolenaar 5 * All rights reserved. 6 * 7 * Redistribution and use in source and binary forms, with or without 8 * modification, are permitted provided that the following conditions 9 * are met: 10 * 11 * 1. Redistributions of source code must retain the above copyright 12 * notice, this list of conditions and the following disclaimer. 13 * 2. Redistributions in binary form must reproduce the above copyright 14 * notice, this list of conditions and the following disclaimer in the 15 * documentation and/or other materials provided with the distribution. 16 * 17 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR 18 * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES 19 * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. 20 * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, 21 * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT 22 * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, 23 * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY 24 * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT 25 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF 26 * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. 27 */ 28 29 #include <sys/cdefs.h> 30 __FBSDID("$FreeBSD$"); 31 32 #include <sys/param.h> 33 #include <sys/systm.h> 34 #include <sys/kernel.h> 35 #include <sys/bus.h> 36 #include <sys/pcpu.h> 37 #include <sys/proc.h> 38 #include <sys/smp.h> 39 40 #include <machine/bus.h> 41 #include <machine/cpu.h> 42 #include <machine/hid.h> 43 #include <machine/intr_machdep.h> 44 #include <machine/pcb.h> 45 #include <machine/psl.h> 46 #include <machine/smp.h> 47 #include <machine/spr.h> 48 #include <machine/trap.h> 49 50 #include <dev/ofw/openfirm.h> 51 #include <machine/ofw_machdep.h> 52 53 void *ap_pcpu; 54 55 static register_t bsp_state[8] __aligned(8); 56 57 static void cpudep_save_config(void *dummy); 58 SYSINIT(cpu_save_config, SI_SUB_CPU, SI_ORDER_ANY, cpudep_save_config, NULL); 59 60 void 61 cpudep_ap_early_bootstrap(void) 62 { 63 #ifndef __powerpc64__ 64 register_t reg; 65 #endif 66 67 switch (mfpvr() >> 16) { 68 case IBM970: 69 case IBM970FX: 70 case IBM970MP: 71 /* Set HIOR to 0 */ 72 __asm __volatile("mtspr 311,%0" :: "r"(0)); 73 powerpc_sync(); 74 75 /* Restore HID4 and HID5, which are necessary for the MMU */ 76 77 #ifdef __powerpc64__ 78 mtspr(SPR_HID4, bsp_state[2]); powerpc_sync(); isync(); 79 mtspr(SPR_HID5, bsp_state[3]); powerpc_sync(); isync(); 80 #else 81 __asm __volatile("ld %0, 16(%2); sync; isync; \ 82 mtspr %1, %0; sync; isync;" 83 : "=r"(reg) : "K"(SPR_HID4), "b"(bsp_state)); 84 __asm __volatile("ld %0, 24(%2); sync; isync; \ 85 mtspr %1, %0; sync; isync;" 86 : "=r"(reg) : "K"(SPR_HID5), "b"(bsp_state)); 87 #endif 88 powerpc_sync(); 89 break; 90 case IBMPOWER8: 91 case IBMPOWER8E: 92 case IBMPOWER8NVL: 93 case IBMPOWER9: 94 #ifdef __powerpc64__ 95 if (mfmsr() & PSL_HV) { 96 isync(); 97 /* 98 * Direct interrupts to SRR instead of HSRR and 99 * reset LPCR otherwise 100 */ 101 mtspr(SPR_LPID, 0); 102 isync(); 103 104 mtspr(SPR_LPCR, lpcr); 105 isync(); 106 107 /* 108 * Nuke FSCR, to be managed on a per-process basis 109 * later. 110 */ 111 mtspr(SPR_FSCR, 0); 112 } 113 #endif 114 break; 115 } 116 117 __asm __volatile("mtsprg 0, %0" :: "r"(ap_pcpu)); 118 powerpc_sync(); 119 } 120 121 uintptr_t 122 cpudep_ap_bootstrap(void) 123 { 124 register_t msr, sp; 125 126 msr = psl_kernset & ~PSL_EE; 127 mtmsr(msr); 128 129 pcpup->pc_curthread = pcpup->pc_idlethread; 130 #ifdef __powerpc64__ 131 __asm __volatile("mr 13,%0" :: "r"(pcpup->pc_curthread)); 132 #else 133 __asm __volatile("mr 2,%0" :: "r"(pcpup->pc_curthread)); 134 #endif 135 pcpup->pc_curpcb = pcpup->pc_curthread->td_pcb; 136 sp = pcpup->pc_curpcb->pcb_sp; 137 138 return (sp); 139 } 140 141 static register_t 142 mpc74xx_l2_enable(register_t l2cr_config) 143 { 144 register_t ccr, bit; 145 uint16_t vers; 146 147 vers = mfpvr() >> 16; 148 switch (vers) { 149 case MPC7400: 150 case MPC7410: 151 bit = L2CR_L2IP; 152 break; 153 default: 154 bit = L2CR_L2I; 155 break; 156 } 157 158 ccr = mfspr(SPR_L2CR); 159 if (ccr & L2CR_L2E) 160 return (ccr); 161 162 /* Configure L2 cache. */ 163 ccr = l2cr_config & ~L2CR_L2E; 164 mtspr(SPR_L2CR, ccr | L2CR_L2I); 165 do { 166 ccr = mfspr(SPR_L2CR); 167 } while (ccr & bit); 168 powerpc_sync(); 169 mtspr(SPR_L2CR, l2cr_config); 170 powerpc_sync(); 171 172 return (l2cr_config); 173 } 174 175 static register_t 176 mpc745x_l3_enable(register_t l3cr_config) 177 { 178 register_t ccr; 179 180 ccr = mfspr(SPR_L3CR); 181 if (ccr & L3CR_L3E) 182 return (ccr); 183 184 /* Configure L3 cache. */ 185 ccr = l3cr_config & ~(L3CR_L3E | L3CR_L3I | L3CR_L3PE | L3CR_L3CLKEN); 186 mtspr(SPR_L3CR, ccr); 187 ccr |= 0x4000000; /* Magic, but documented. */ 188 mtspr(SPR_L3CR, ccr); 189 ccr |= L3CR_L3CLKEN; 190 mtspr(SPR_L3CR, ccr); 191 mtspr(SPR_L3CR, ccr | L3CR_L3I); 192 while (mfspr(SPR_L3CR) & L3CR_L3I) 193 ; 194 mtspr(SPR_L3CR, ccr & ~L3CR_L3CLKEN); 195 powerpc_sync(); 196 DELAY(100); 197 mtspr(SPR_L3CR, ccr); 198 powerpc_sync(); 199 DELAY(100); 200 ccr |= L3CR_L3E; 201 mtspr(SPR_L3CR, ccr); 202 powerpc_sync(); 203 204 return(ccr); 205 } 206 207 static register_t 208 mpc74xx_l1d_enable(void) 209 { 210 register_t hid; 211 212 hid = mfspr(SPR_HID0); 213 if (hid & HID0_DCE) 214 return (hid); 215 216 /* Enable L1 D-cache */ 217 hid |= HID0_DCE; 218 powerpc_sync(); 219 mtspr(SPR_HID0, hid | HID0_DCFI); 220 powerpc_sync(); 221 222 return (hid); 223 } 224 225 static register_t 226 mpc74xx_l1i_enable(void) 227 { 228 register_t hid; 229 230 hid = mfspr(SPR_HID0); 231 if (hid & HID0_ICE) 232 return (hid); 233 234 /* Enable L1 I-cache */ 235 hid |= HID0_ICE; 236 isync(); 237 mtspr(SPR_HID0, hid | HID0_ICFI); 238 isync(); 239 240 return (hid); 241 } 242 243 static void 244 cpudep_save_config(void *dummy) 245 { 246 uint16_t vers; 247 248 vers = mfpvr() >> 16; 249 250 switch(vers) { 251 case IBM970: 252 case IBM970FX: 253 case IBM970MP: 254 #ifdef __powerpc64__ 255 bsp_state[0] = mfspr(SPR_HID0); 256 bsp_state[1] = mfspr(SPR_HID1); 257 bsp_state[2] = mfspr(SPR_HID4); 258 bsp_state[3] = mfspr(SPR_HID5); 259 #else 260 __asm __volatile ("mfspr %0,%2; mr %1,%0; srdi %0,%0,32" 261 : "=r" (bsp_state[0]),"=r" (bsp_state[1]) : "K" (SPR_HID0)); 262 __asm __volatile ("mfspr %0,%2; mr %1,%0; srdi %0,%0,32" 263 : "=r" (bsp_state[2]),"=r" (bsp_state[3]) : "K" (SPR_HID1)); 264 __asm __volatile ("mfspr %0,%2; mr %1,%0; srdi %0,%0,32" 265 : "=r" (bsp_state[4]),"=r" (bsp_state[5]) : "K" (SPR_HID4)); 266 __asm __volatile ("mfspr %0,%2; mr %1,%0; srdi %0,%0,32" 267 : "=r" (bsp_state[6]),"=r" (bsp_state[7]) : "K" (SPR_HID5)); 268 #endif 269 270 powerpc_sync(); 271 272 break; 273 case IBMCELLBE: 274 #ifdef NOTYET /* Causes problems if in instruction stream on 970 */ 275 if (mfmsr() & PSL_HV) { 276 bsp_state[0] = mfspr(SPR_HID0); 277 bsp_state[1] = mfspr(SPR_HID1); 278 bsp_state[2] = mfspr(SPR_HID4); 279 bsp_state[3] = mfspr(SPR_HID6); 280 281 bsp_state[4] = mfspr(SPR_CELL_TSCR); 282 } 283 #endif 284 285 bsp_state[5] = mfspr(SPR_CELL_TSRL); 286 287 break; 288 case MPC7450: 289 case MPC7455: 290 case MPC7457: 291 /* Only MPC745x CPUs have an L3 cache. */ 292 bsp_state[3] = mfspr(SPR_L3CR); 293 294 /* Fallthrough */ 295 case MPC7400: 296 case MPC7410: 297 case MPC7447A: 298 case MPC7448: 299 bsp_state[2] = mfspr(SPR_L2CR); 300 bsp_state[1] = mfspr(SPR_HID1); 301 bsp_state[0] = mfspr(SPR_HID0); 302 break; 303 } 304 } 305 306 void 307 cpudep_ap_setup() 308 { 309 register_t reg; 310 uint16_t vers; 311 312 vers = mfpvr() >> 16; 313 314 /* The following is needed for restoring from sleep. */ 315 platform_smp_timebase_sync(0, 1); 316 317 switch(vers) { 318 case IBM970: 319 case IBM970FX: 320 case IBM970MP: 321 /* 322 * The 970 has strange rules about how to update HID registers. 323 * See Table 2-3, 970MP manual 324 * 325 * Note: HID4 and HID5 restored already in 326 * cpudep_ap_early_bootstrap() 327 */ 328 329 __asm __volatile("mtasr %0; sync" :: "r"(0)); 330 #ifdef __powerpc64__ 331 __asm __volatile(" \ 332 sync; isync; \ 333 mtspr %1, %0; \ 334 mfspr %0, %1; mfspr %0, %1; mfspr %0, %1; \ 335 mfspr %0, %1; mfspr %0, %1; mfspr %0, %1; \ 336 sync; isync" 337 :: "r"(bsp_state[0]), "K"(SPR_HID0)); 338 __asm __volatile("sync; isync; \ 339 mtspr %1, %0; mtspr %1, %0; sync; isync" 340 :: "r"(bsp_state[1]), "K"(SPR_HID1)); 341 #else 342 __asm __volatile(" \ 343 ld %0,0(%2); \ 344 sync; isync; \ 345 mtspr %1, %0; \ 346 mfspr %0, %1; mfspr %0, %1; mfspr %0, %1; \ 347 mfspr %0, %1; mfspr %0, %1; mfspr %0, %1; \ 348 sync; isync" 349 : "=r"(reg) : "K"(SPR_HID0), "b"(bsp_state)); 350 __asm __volatile("ld %0, 8(%2); sync; isync; \ 351 mtspr %1, %0; mtspr %1, %0; sync; isync" 352 : "=r"(reg) : "K"(SPR_HID1), "b"(bsp_state)); 353 #endif 354 355 powerpc_sync(); 356 break; 357 case IBMCELLBE: 358 #ifdef NOTYET /* Causes problems if in instruction stream on 970 */ 359 if (mfmsr() & PSL_HV) { 360 mtspr(SPR_HID0, bsp_state[0]); 361 mtspr(SPR_HID1, bsp_state[1]); 362 mtspr(SPR_HID4, bsp_state[2]); 363 mtspr(SPR_HID6, bsp_state[3]); 364 365 mtspr(SPR_CELL_TSCR, bsp_state[4]); 366 } 367 #endif 368 369 mtspr(SPR_CELL_TSRL, bsp_state[5]); 370 371 break; 372 case MPC7400: 373 case MPC7410: 374 case MPC7447A: 375 case MPC7448: 376 case MPC7450: 377 case MPC7455: 378 case MPC7457: 379 /* XXX: Program the CPU ID into PIR */ 380 __asm __volatile("mtspr 1023,%0" :: "r"(PCPU_GET(cpuid))); 381 382 powerpc_sync(); 383 isync(); 384 385 mtspr(SPR_HID0, bsp_state[0]); isync(); 386 mtspr(SPR_HID1, bsp_state[1]); isync(); 387 388 /* Now enable the L3 cache. */ 389 switch (vers) { 390 case MPC7450: 391 case MPC7455: 392 case MPC7457: 393 /* Only MPC745x CPUs have an L3 cache. */ 394 reg = mpc745x_l3_enable(bsp_state[3]); 395 default: 396 break; 397 } 398 399 reg = mpc74xx_l2_enable(bsp_state[2]); 400 reg = mpc74xx_l1d_enable(); 401 reg = mpc74xx_l1i_enable(); 402 403 break; 404 case IBMPOWER7: 405 case IBMPOWER7PLUS: 406 case IBMPOWER8: 407 case IBMPOWER8E: 408 case IBMPOWER8NVL: 409 case IBMPOWER9: 410 #ifdef __powerpc64__ 411 if (mfmsr() & PSL_HV) { 412 mtspr(SPR_LPCR, mfspr(SPR_LPCR) | lpcr | 413 LPCR_PECE_WAKESET); 414 isync(); 415 } 416 #endif 417 break; 418 default: 419 #ifdef __powerpc64__ 420 if (!(mfmsr() & PSL_HV)) /* Rely on HV to have set things up */ 421 break; 422 #endif 423 printf("WARNING: Unknown CPU type. Cache performace may be " 424 "suboptimal.\n"); 425 break; 426 } 427 } 428 429