1 /*- 2 * Copyright (c) 2008 Marcel Moolenaar 3 * All rights reserved. 4 * 5 * Redistribution and use in source and binary forms, with or without 6 * modification, are permitted provided that the following conditions 7 * are met: 8 * 9 * 1. Redistributions of source code must retain the above copyright 10 * notice, this list of conditions and the following disclaimer. 11 * 2. Redistributions in binary form must reproduce the above copyright 12 * notice, this list of conditions and the following disclaimer in the 13 * documentation and/or other materials provided with the distribution. 14 * 15 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR 16 * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES 17 * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. 18 * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, 19 * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT 20 * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, 21 * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY 22 * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT 23 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF 24 * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. 25 */ 26 27 #include <sys/cdefs.h> 28 __FBSDID("$FreeBSD$"); 29 30 #include <sys/param.h> 31 #include <sys/systm.h> 32 #include <sys/kernel.h> 33 #include <sys/bus.h> 34 #include <sys/pcpu.h> 35 #include <sys/proc.h> 36 #include <sys/smp.h> 37 38 #include <machine/bus.h> 39 #include <machine/cpu.h> 40 #include <machine/hid.h> 41 #include <machine/intr_machdep.h> 42 #include <machine/pcb.h> 43 #include <machine/psl.h> 44 #include <machine/smp.h> 45 #include <machine/spr.h> 46 #include <machine/trap.h> 47 48 #include <dev/ofw/openfirm.h> 49 #include <machine/ofw_machdep.h> 50 51 void *ap_pcpu; 52 53 static register_t bsp_state[8] __aligned(8); 54 55 static void cpudep_save_config(void *dummy); 56 SYSINIT(cpu_save_config, SI_SUB_CPU, SI_ORDER_ANY, cpudep_save_config, NULL); 57 58 void 59 cpudep_ap_early_bootstrap(void) 60 { 61 register_t reg; 62 63 __asm __volatile("mtsprg 0, %0" :: "r"(ap_pcpu)); 64 powerpc_sync(); 65 66 switch (mfpvr() >> 16) { 67 case IBM970: 68 case IBM970FX: 69 case IBM970MP: 70 /* Restore HID4 and HID5, which are necessary for the MMU */ 71 72 __asm __volatile("ld %0, 16(%2); sync; isync; \ 73 mtspr %1, %0; sync; isync;" 74 : "=r"(reg) : "K"(SPR_HID4), "r"(bsp_state)); 75 __asm __volatile("ld %0, 24(%2); sync; isync; \ 76 mtspr %1, %0; sync; isync;" 77 : "=r"(reg) : "K"(SPR_HID5), "r"(bsp_state)); 78 powerpc_sync(); 79 break; 80 } 81 } 82 83 uintptr_t 84 cpudep_ap_bootstrap(void) 85 { 86 register_t msr, sp; 87 88 msr = PSL_KERNSET & ~PSL_EE; 89 mtmsr(msr); 90 91 pcpup->pc_curthread = pcpup->pc_idlethread; 92 #ifdef __powerpc64__ 93 __asm __volatile("mr 13,%0" :: "r"(pcpup->pc_curthread)); 94 #else 95 __asm __volatile("mr 2,%0" :: "r"(pcpup->pc_curthread)); 96 #endif 97 pcpup->pc_curpcb = pcpup->pc_curthread->td_pcb; 98 sp = pcpup->pc_curpcb->pcb_sp; 99 100 return (sp); 101 } 102 103 static register_t 104 mpc74xx_l2_enable(register_t l2cr_config) 105 { 106 register_t ccr, bit; 107 uint16_t vers; 108 109 vers = mfpvr() >> 16; 110 switch (vers) { 111 case MPC7400: 112 case MPC7410: 113 bit = L2CR_L2IP; 114 break; 115 default: 116 bit = L2CR_L2I; 117 break; 118 } 119 120 ccr = mfspr(SPR_L2CR); 121 if (ccr & L2CR_L2E) 122 return (ccr); 123 124 /* Configure L2 cache. */ 125 ccr = l2cr_config & ~L2CR_L2E; 126 mtspr(SPR_L2CR, ccr | L2CR_L2I); 127 do { 128 ccr = mfspr(SPR_L2CR); 129 } while (ccr & bit); 130 powerpc_sync(); 131 mtspr(SPR_L2CR, l2cr_config); 132 powerpc_sync(); 133 134 return (l2cr_config); 135 } 136 137 static register_t 138 mpc745x_l3_enable(register_t l3cr_config) 139 { 140 register_t ccr; 141 142 ccr = mfspr(SPR_L3CR); 143 if (ccr & L3CR_L3E) 144 return (ccr); 145 146 /* Configure L3 cache. */ 147 ccr = l3cr_config & ~(L3CR_L3E | L3CR_L3I | L3CR_L3PE | L3CR_L3CLKEN); 148 mtspr(SPR_L3CR, ccr); 149 ccr |= 0x4000000; /* Magic, but documented. */ 150 mtspr(SPR_L3CR, ccr); 151 ccr |= L3CR_L3CLKEN; 152 mtspr(SPR_L3CR, ccr); 153 mtspr(SPR_L3CR, ccr | L3CR_L3I); 154 while (mfspr(SPR_L3CR) & L3CR_L3I) 155 ; 156 mtspr(SPR_L3CR, ccr & ~L3CR_L3CLKEN); 157 powerpc_sync(); 158 DELAY(100); 159 mtspr(SPR_L3CR, ccr); 160 powerpc_sync(); 161 DELAY(100); 162 ccr |= L3CR_L3E; 163 mtspr(SPR_L3CR, ccr); 164 powerpc_sync(); 165 166 return(ccr); 167 } 168 169 static register_t 170 mpc74xx_l1d_enable(void) 171 { 172 register_t hid; 173 174 hid = mfspr(SPR_HID0); 175 if (hid & HID0_DCE) 176 return (hid); 177 178 /* Enable L1 D-cache */ 179 hid |= HID0_DCE; 180 powerpc_sync(); 181 mtspr(SPR_HID0, hid | HID0_DCFI); 182 powerpc_sync(); 183 184 return (hid); 185 } 186 187 static register_t 188 mpc74xx_l1i_enable(void) 189 { 190 register_t hid; 191 192 hid = mfspr(SPR_HID0); 193 if (hid & HID0_ICE) 194 return (hid); 195 196 /* Enable L1 I-cache */ 197 hid |= HID0_ICE; 198 isync(); 199 mtspr(SPR_HID0, hid | HID0_ICFI); 200 isync(); 201 202 return (hid); 203 } 204 205 static void 206 cpudep_save_config(void *dummy) 207 { 208 uint16_t vers; 209 210 vers = mfpvr() >> 16; 211 212 switch(vers) { 213 case IBM970: 214 case IBM970FX: 215 case IBM970MP: 216 #ifdef __powerpc64__ 217 bsp_state[0] = mfspr(SPR_HID0); 218 bsp_state[1] = mfspr(SPR_HID1); 219 bsp_state[2] = mfspr(SPR_HID4); 220 bsp_state[3] = mfspr(SPR_HID5); 221 #else 222 __asm __volatile ("mfspr %0,%2; mr %1,%0; srdi %0,%0,32" 223 : "=r" (bsp_state[0]),"=r" (bsp_state[1]) : "K" (SPR_HID0)); 224 __asm __volatile ("mfspr %0,%2; mr %1,%0; srdi %0,%0,32" 225 : "=r" (bsp_state[2]),"=r" (bsp_state[3]) : "K" (SPR_HID1)); 226 __asm __volatile ("mfspr %0,%2; mr %1,%0; srdi %0,%0,32" 227 : "=r" (bsp_state[4]),"=r" (bsp_state[5]) : "K" (SPR_HID4)); 228 __asm __volatile ("mfspr %0,%2; mr %1,%0; srdi %0,%0,32" 229 : "=r" (bsp_state[6]),"=r" (bsp_state[7]) : "K" (SPR_HID5)); 230 #endif 231 232 powerpc_sync(); 233 234 break; 235 case IBMCELLBE: 236 #ifdef NOTYET /* Causes problems if in instruction stream on 970 */ 237 if (mfmsr() & PSL_HV) { 238 bsp_state[0] = mfspr(SPR_HID0); 239 bsp_state[1] = mfspr(SPR_HID1); 240 bsp_state[2] = mfspr(SPR_HID4); 241 bsp_state[3] = mfspr(SPR_HID6); 242 243 bsp_state[4] = mfspr(SPR_CELL_TSCR); 244 } 245 #endif 246 247 bsp_state[5] = mfspr(SPR_CELL_TSRL); 248 249 break; 250 case MPC7450: 251 case MPC7455: 252 case MPC7457: 253 /* Only MPC745x CPUs have an L3 cache. */ 254 bsp_state[3] = mfspr(SPR_L3CR); 255 256 /* Fallthrough */ 257 case MPC7400: 258 case MPC7410: 259 case MPC7447A: 260 case MPC7448: 261 bsp_state[2] = mfspr(SPR_L2CR); 262 bsp_state[1] = mfspr(SPR_HID1); 263 bsp_state[0] = mfspr(SPR_HID0); 264 break; 265 } 266 } 267 268 void 269 cpudep_ap_setup() 270 { 271 register_t reg; 272 uint16_t vers; 273 274 vers = mfpvr() >> 16; 275 276 switch(vers) { 277 case IBM970: 278 case IBM970FX: 279 case IBM970MP: 280 /* Set HIOR to 0 */ 281 __asm __volatile("mtspr 311,%0" :: "r"(0)); 282 powerpc_sync(); 283 284 /* 285 * The 970 has strange rules about how to update HID registers. 286 * See Table 2-3, 970MP manual 287 */ 288 289 __asm __volatile("mtasr %0; sync" :: "r"(0)); 290 __asm __volatile(" \ 291 ld %0,0(%2); \ 292 sync; isync; \ 293 mtspr %1, %0; \ 294 mfspr %0, %1; mfspr %0, %1; mfspr %0, %1; \ 295 mfspr %0, %1; mfspr %0, %1; mfspr %0, %1; \ 296 sync; isync" 297 : "=r"(reg) : "K"(SPR_HID0), "r"(bsp_state)); 298 __asm __volatile("ld %0, 8(%2); sync; isync; \ 299 mtspr %1, %0; mtspr %1, %0; sync; isync" 300 : "=r"(reg) : "K"(SPR_HID1), "r"(bsp_state)); 301 __asm __volatile("ld %0, 16(%2); sync; isync; \ 302 mtspr %1, %0; sync; isync;" 303 : "=r"(reg) : "K"(SPR_HID4), "r"(bsp_state)); 304 __asm __volatile("ld %0, 24(%2); sync; isync; \ 305 mtspr %1, %0; sync; isync;" 306 : "=r"(reg) : "K"(SPR_HID5), "r"(bsp_state)); 307 308 powerpc_sync(); 309 break; 310 case IBMCELLBE: 311 #ifdef NOTYET /* Causes problems if in instruction stream on 970 */ 312 if (mfmsr() & PSL_HV) { 313 mtspr(SPR_HID0, bsp_state[0]); 314 mtspr(SPR_HID1, bsp_state[1]); 315 mtspr(SPR_HID4, bsp_state[2]); 316 mtspr(SPR_HID6, bsp_state[3]); 317 318 mtspr(SPR_CELL_TSCR, bsp_state[4]); 319 } 320 #endif 321 322 mtspr(SPR_CELL_TSRL, bsp_state[5]); 323 324 break; 325 case MPC7450: 326 case MPC7455: 327 case MPC7457: 328 /* Only MPC745x CPUs have an L3 cache. */ 329 reg = mpc745x_l3_enable(bsp_state[3]); 330 331 /* Fallthrough */ 332 case MPC7400: 333 case MPC7410: 334 case MPC7447A: 335 case MPC7448: 336 /* XXX: Program the CPU ID into PIR */ 337 __asm __volatile("mtspr 1023,%0" :: "r"(PCPU_GET(cpuid))); 338 339 powerpc_sync(); 340 isync(); 341 342 mtspr(SPR_HID0, bsp_state[0]); isync(); 343 mtspr(SPR_HID1, bsp_state[1]); isync(); 344 345 reg = mpc74xx_l2_enable(bsp_state[2]); 346 reg = mpc74xx_l1d_enable(); 347 reg = mpc74xx_l1i_enable(); 348 349 break; 350 default: 351 #ifdef __powerpc64__ 352 if (!(mfmsr() & PSL_HV)) /* Rely on HV to have set things up */ 353 break; 354 #endif 355 printf("WARNING: Unknown CPU type. Cache performace may be " 356 "suboptimal.\n"); 357 break; 358 } 359 } 360 361