xref: /freebsd/sys/powerpc/aim/mp_cpudep.c (revision 1631382cf2820245cc72965498ff174bb548dd63)
1 /*-
2  * SPDX-License-Identifier: BSD-2-Clause
3  *
4  * Copyright (c) 2008 Marcel Moolenaar
5  * All rights reserved.
6  *
7  * Redistribution and use in source and binary forms, with or without
8  * modification, are permitted provided that the following conditions
9  * are met:
10  *
11  * 1. Redistributions of source code must retain the above copyright
12  *    notice, this list of conditions and the following disclaimer.
13  * 2. Redistributions in binary form must reproduce the above copyright
14  *    notice, this list of conditions and the following disclaimer in the
15  *    documentation and/or other materials provided with the distribution.
16  *
17  * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
18  * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
19  * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
20  * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
21  * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
22  * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
23  * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
24  * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
25  * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
26  * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
27  */
28 
29 #include <sys/param.h>
30 #include <sys/systm.h>
31 #include <sys/kernel.h>
32 #include <sys/bus.h>
33 #include <sys/pcpu.h>
34 #include <sys/proc.h>
35 #include <sys/sched.h>
36 #include <sys/smp.h>
37 
38 #include <machine/bus.h>
39 #include <machine/cpu.h>
40 #include <machine/hid.h>
41 #include <machine/intr_machdep.h>
42 #include <machine/pcb.h>
43 #include <machine/psl.h>
44 #include <machine/smp.h>
45 #include <machine/spr.h>
46 #include <machine/trap.h>
47 
48 #include <dev/ofw/openfirm.h>
49 #include <machine/ofw_machdep.h>
50 
51 void *ap_pcpu;
52 
53 static register_t bsp_state[8] __aligned(8);
54 
55 static void cpudep_save_config(void *dummy);
56 SYSINIT(cpu_save_config, SI_SUB_CPU, SI_ORDER_ANY, cpudep_save_config, NULL);
57 
58 void
59 cpudep_ap_early_bootstrap(void)
60 {
61 #ifndef __powerpc64__
62 	register_t reg;
63 #endif
64 
65 	switch (mfpvr() >> 16) {
66 	case IBM970:
67 	case IBM970FX:
68 	case IBM970MP:
69 		/* Set HIOR to 0 */
70 		__asm __volatile("mtspr 311,%0" :: "r"(0));
71 		powerpc_sync();
72 
73 		/* Restore HID4 and HID5, which are necessary for the MMU */
74 
75 #ifdef __powerpc64__
76 		mtspr(SPR_HID4, bsp_state[2]); powerpc_sync(); isync();
77 		mtspr(SPR_HID5, bsp_state[3]); powerpc_sync(); isync();
78 #else
79 		__asm __volatile("ld %0, 16(%2); sync; isync;	\
80 		    mtspr %1, %0; sync; isync;"
81 		    : "=r"(reg) : "K"(SPR_HID4), "b"(bsp_state));
82 		__asm __volatile("ld %0, 24(%2); sync; isync;	\
83 		    mtspr %1, %0; sync; isync;"
84 		    : "=r"(reg) : "K"(SPR_HID5), "b"(bsp_state));
85 #endif
86 		powerpc_sync();
87 		break;
88 	case IBMPOWER8:
89 	case IBMPOWER8E:
90 	case IBMPOWER8NVL:
91 	case IBMPOWER9:
92 #ifdef __powerpc64__
93 		if (mfmsr() & PSL_HV) {
94 			isync();
95 			/*
96 			 * Direct interrupts to SRR instead of HSRR and
97 			 * reset LPCR otherwise
98 			 */
99 			mtspr(SPR_LPID, 0);
100 			isync();
101 
102 			mtspr(SPR_LPCR, lpcr);
103 			isync();
104 
105 			/*
106 			 * Nuke FSCR, to be managed on a per-process basis
107 			 * later.
108 			 */
109 			mtspr(SPR_FSCR, 0);
110 		}
111 #endif
112 		break;
113 	}
114 
115 	__asm __volatile("mtsprg 0, %0" :: "r"(ap_pcpu));
116 	powerpc_sync();
117 }
118 
119 uintptr_t
120 cpudep_ap_bootstrap(void)
121 {
122 	register_t msr, sp;
123 
124 	msr = psl_kernset & ~PSL_EE;
125 	mtmsr(msr);
126 
127 	pcpup->pc_curthread = pcpup->pc_idlethread;
128 #ifdef __powerpc64__
129 	__asm __volatile("mr 13,%0" :: "r"(pcpup->pc_curthread));
130 #else
131 	__asm __volatile("mr 2,%0" :: "r"(pcpup->pc_curthread));
132 #endif
133 	pcpup->pc_curpcb = pcpup->pc_curthread->td_pcb;
134 	sp = pcpup->pc_curpcb->pcb_sp;
135 	schedinit_ap();
136 
137 	return (sp);
138 }
139 
140 static register_t
141 mpc74xx_l2_enable(register_t l2cr_config)
142 {
143 	register_t ccr, bit;
144 	uint16_t	vers;
145 
146 	vers = mfpvr() >> 16;
147 	switch (vers) {
148 	case MPC7400:
149 	case MPC7410:
150 		bit = L2CR_L2IP;
151 		break;
152 	default:
153 		bit = L2CR_L2I;
154 		break;
155 	}
156 
157 	ccr = mfspr(SPR_L2CR);
158 	if (ccr & L2CR_L2E)
159 		return (ccr);
160 
161 	/* Configure L2 cache. */
162 	ccr = l2cr_config & ~L2CR_L2E;
163 	mtspr(SPR_L2CR, ccr | L2CR_L2I);
164 	do {
165 		ccr = mfspr(SPR_L2CR);
166 	} while (ccr & bit);
167 	powerpc_sync();
168 	mtspr(SPR_L2CR, l2cr_config);
169 	powerpc_sync();
170 
171 	return (l2cr_config);
172 }
173 
174 static register_t
175 mpc745x_l3_enable(register_t l3cr_config)
176 {
177 	register_t ccr;
178 
179 	ccr = mfspr(SPR_L3CR);
180 	if (ccr & L3CR_L3E)
181 		return (ccr);
182 
183 	/* Configure L3 cache. */
184 	ccr = l3cr_config & ~(L3CR_L3E | L3CR_L3I | L3CR_L3PE | L3CR_L3CLKEN);
185 	mtspr(SPR_L3CR, ccr);
186 	ccr |= 0x4000000;       /* Magic, but documented. */
187 	mtspr(SPR_L3CR, ccr);
188 	ccr |= L3CR_L3CLKEN;
189 	mtspr(SPR_L3CR, ccr);
190 	mtspr(SPR_L3CR, ccr | L3CR_L3I);
191 	while (mfspr(SPR_L3CR) & L3CR_L3I)
192 		;
193 	mtspr(SPR_L3CR, ccr & ~L3CR_L3CLKEN);
194 	powerpc_sync();
195 	DELAY(100);
196 	mtspr(SPR_L3CR, ccr);
197 	powerpc_sync();
198 	DELAY(100);
199 	ccr |= L3CR_L3E;
200 	mtspr(SPR_L3CR, ccr);
201 	powerpc_sync();
202 
203 	return(ccr);
204 }
205 
206 static register_t
207 mpc74xx_l1d_enable(void)
208 {
209 	register_t hid;
210 
211 	hid = mfspr(SPR_HID0);
212 	if (hid & HID0_DCE)
213 		return (hid);
214 
215 	/* Enable L1 D-cache */
216 	hid |= HID0_DCE;
217 	powerpc_sync();
218 	mtspr(SPR_HID0, hid | HID0_DCFI);
219 	powerpc_sync();
220 
221 	return (hid);
222 }
223 
224 static register_t
225 mpc74xx_l1i_enable(void)
226 {
227 	register_t hid;
228 
229 	hid = mfspr(SPR_HID0);
230 	if (hid & HID0_ICE)
231 		return (hid);
232 
233 	/* Enable L1 I-cache */
234 	hid |= HID0_ICE;
235 	isync();
236 	mtspr(SPR_HID0, hid | HID0_ICFI);
237 	isync();
238 
239 	return (hid);
240 }
241 
242 static void
243 cpudep_save_config(void *dummy)
244 {
245 	uint16_t	vers;
246 
247 	vers = mfpvr() >> 16;
248 
249 	switch(vers) {
250 	case IBM970:
251 	case IBM970FX:
252 	case IBM970MP:
253 		#ifdef __powerpc64__
254 		bsp_state[0] = mfspr(SPR_HID0);
255 		bsp_state[1] = mfspr(SPR_HID1);
256 		bsp_state[2] = mfspr(SPR_HID4);
257 		bsp_state[3] = mfspr(SPR_HID5);
258 		#else
259 		__asm __volatile ("mfspr %0,%2; mr %1,%0; srdi %0,%0,32"
260 		    : "=r" (bsp_state[0]),"=r" (bsp_state[1]) : "K" (SPR_HID0));
261 		__asm __volatile ("mfspr %0,%2; mr %1,%0; srdi %0,%0,32"
262 		    : "=r" (bsp_state[2]),"=r" (bsp_state[3]) : "K" (SPR_HID1));
263 		__asm __volatile ("mfspr %0,%2; mr %1,%0; srdi %0,%0,32"
264 		    : "=r" (bsp_state[4]),"=r" (bsp_state[5]) : "K" (SPR_HID4));
265 		__asm __volatile ("mfspr %0,%2; mr %1,%0; srdi %0,%0,32"
266 		    : "=r" (bsp_state[6]),"=r" (bsp_state[7]) : "K" (SPR_HID5));
267 		#endif
268 
269 		powerpc_sync();
270 
271 		break;
272 	case IBMCELLBE:
273 		#ifdef NOTYET /* Causes problems if in instruction stream on 970 */
274 		if (mfmsr() & PSL_HV) {
275 			bsp_state[0] = mfspr(SPR_HID0);
276 			bsp_state[1] = mfspr(SPR_HID1);
277 			bsp_state[2] = mfspr(SPR_HID4);
278 			bsp_state[3] = mfspr(SPR_HID6);
279 
280 			bsp_state[4] = mfspr(SPR_CELL_TSCR);
281 		}
282 		#endif
283 
284 		bsp_state[5] = mfspr(SPR_CELL_TSRL);
285 
286 		break;
287 	case MPC7450:
288 	case MPC7455:
289 	case MPC7457:
290 		/* Only MPC745x CPUs have an L3 cache. */
291 		bsp_state[3] = mfspr(SPR_L3CR);
292 
293 		/* Fallthrough */
294 	case MPC7400:
295 	case MPC7410:
296 	case MPC7447A:
297 	case MPC7448:
298 		bsp_state[2] = mfspr(SPR_L2CR);
299 		bsp_state[1] = mfspr(SPR_HID1);
300 		bsp_state[0] = mfspr(SPR_HID0);
301 		break;
302 	}
303 }
304 
305 void
306 cpudep_ap_setup(void)
307 {
308 #ifndef __powerpc64__
309 	register_t	reg;
310 #endif
311 	uint16_t	vers;
312 
313 	vers = mfpvr() >> 16;
314 
315 	switch(vers) {
316 	case IBM970:
317 	case IBM970FX:
318 	case IBM970MP:
319 		/*
320 		 * The 970 has strange rules about how to update HID registers.
321 		 * See Table 2-3, 970MP manual
322 		 *
323 		 * Note: HID4 and HID5 restored already in
324 		 * cpudep_ap_early_bootstrap()
325 		 */
326 
327 		__asm __volatile("mtasr %0; sync" :: "r"(0));
328 	#ifdef __powerpc64__
329 		__asm __volatile(" \
330 			sync; isync;					\
331 			mtspr	%1, %0;					\
332 			mfspr	%0, %1;	mfspr	%0, %1;	mfspr	%0, %1;	\
333 			mfspr	%0, %1;	mfspr	%0, %1;	mfspr	%0, %1; \
334 			sync; isync"
335 		    :: "r"(bsp_state[0]), "K"(SPR_HID0));
336 		__asm __volatile("sync; isync;	\
337 		    mtspr %1, %0; mtspr %1, %0; sync; isync"
338 		    :: "r"(bsp_state[1]), "K"(SPR_HID1));
339 	#else
340 		__asm __volatile(" \
341 			ld	%0,0(%2);				\
342 			sync; isync;					\
343 			mtspr	%1, %0;					\
344 			mfspr	%0, %1;	mfspr	%0, %1;	mfspr	%0, %1;	\
345 			mfspr	%0, %1;	mfspr	%0, %1;	mfspr	%0, %1; \
346 			sync; isync"
347 		    : "=r"(reg) : "K"(SPR_HID0), "b"(bsp_state));
348 		__asm __volatile("ld %0, 8(%2); sync; isync;	\
349 		    mtspr %1, %0; mtspr %1, %0; sync; isync"
350 		    : "=r"(reg) : "K"(SPR_HID1), "b"(bsp_state));
351 	#endif
352 
353 		powerpc_sync();
354 		break;
355 	case IBMCELLBE:
356 		#ifdef NOTYET /* Causes problems if in instruction stream on 970 */
357 		if (mfmsr() & PSL_HV) {
358 			mtspr(SPR_HID0, bsp_state[0]);
359 			mtspr(SPR_HID1, bsp_state[1]);
360 			mtspr(SPR_HID4, bsp_state[2]);
361 			mtspr(SPR_HID6, bsp_state[3]);
362 
363 			mtspr(SPR_CELL_TSCR, bsp_state[4]);
364 		}
365 		#endif
366 
367 		mtspr(SPR_CELL_TSRL, bsp_state[5]);
368 
369 		break;
370 	case MPC7400:
371 	case MPC7410:
372 	case MPC7447A:
373 	case MPC7448:
374 	case MPC7450:
375 	case MPC7455:
376 	case MPC7457:
377 		/* XXX: Program the CPU ID into PIR */
378 		__asm __volatile("mtspr 1023,%0" :: "r"(PCPU_GET(cpuid)));
379 
380 		powerpc_sync();
381 		isync();
382 
383 		mtspr(SPR_HID0, bsp_state[0]); isync();
384 		mtspr(SPR_HID1, bsp_state[1]); isync();
385 
386 		/* Now enable the L3 cache. */
387 		switch (vers) {
388 		case MPC7450:
389 		case MPC7455:
390 		case MPC7457:
391 			/* Only MPC745x CPUs have an L3 cache. */
392 			mpc745x_l3_enable(bsp_state[3]);
393 		default:
394 			break;
395 		}
396 
397 		mpc74xx_l2_enable(bsp_state[2]);
398 		mpc74xx_l1d_enable();
399 		mpc74xx_l1i_enable();
400 
401 		break;
402 	case IBMPOWER7:
403 	case IBMPOWER7PLUS:
404 	case IBMPOWER8:
405 	case IBMPOWER8E:
406 	case IBMPOWER8NVL:
407 	case IBMPOWER9:
408 #ifdef __powerpc64__
409 		if (mfmsr() & PSL_HV) {
410 			mtspr(SPR_LPCR, mfspr(SPR_LPCR) | lpcr |
411 			    LPCR_PECE_WAKESET);
412 			isync();
413 		}
414 #endif
415 		break;
416 	default:
417 #ifdef __powerpc64__
418 		if (!(mfmsr() & PSL_HV)) /* Rely on HV to have set things up */
419 			break;
420 #endif
421 		printf("WARNING: Unknown CPU type. Cache performace may be "
422 		    "suboptimal.\n");
423 		break;
424 	}
425 }
426