xref: /freebsd/sys/opencrypto/cryptodev.h (revision 590adc1bc22ba1dfc4e8df656a1ea90144925ac1)

/*	$FreeBSD$	*/
/*	$OpenBSD: cryptodev.h,v 1.31 2002/06/11 11:14:29 beck Exp $	*/

/*-
 * The author of this code is Angelos D. Keromytis (angelos@cis.upenn.edu)
 * Copyright (c) 2002-2006 Sam Leffler, Errno Consulting
 *
 * This code was written by Angelos D. Keromytis in Athens, Greece, in
 * February 2000. Network Security Technologies Inc. (NSTI) kindly
 * supported the development of this code.
 *
 * Copyright (c) 2000 Angelos D. Keromytis
 *
 * Permission to use, copy, and modify this software with or without fee
 * is hereby granted, provided that this entire notice is included in
 * all source code copies of any software which is or includes a copy or
 * modification of this software.
 *
 * THIS SOFTWARE IS BEING PROVIDED "AS IS", WITHOUT ANY EXPRESS OR
 * IMPLIED WARRANTY. IN PARTICULAR, NONE OF THE AUTHORS MAKES ANY
 * REPRESENTATION OR WARRANTY OF ANY KIND CONCERNING THE
 * MERCHANTABILITY OF THIS SOFTWARE OR ITS FITNESS FOR ANY PARTICULAR
 * PURPOSE.
 *
 * Copyright (c) 2001 Theo de Raadt
 * Copyright (c) 2014 The FreeBSD Foundation
 * All rights reserved.
 *
 * Portions of this software were developed by John-Mark Gurney
 * under sponsorship of the FreeBSD Foundation and
 * Rubicon Communications, LLC (Netgate).
 *
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions
 * are met:
 *
 * 1. Redistributions of source code must retain the above copyright
 *   notice, this list of conditions and the following disclaimer.
 * 2. Redistributions in binary form must reproduce the above copyright
 *   notice, this list of conditions and the following disclaimer in the
 *   documentation and/or other materials provided with the distribution.
 * 3. The name of the author may not be used to endorse or promote products
 *   derived from this software without specific prior written permission.
 *
 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
 * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
 * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
 * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
 * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
 * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
 * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
 * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
 * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
 *
 * Effort sponsored in part by the Defense Advanced Research Projects
 * Agency (DARPA) and Air Force Research Laboratory, Air Force
 * Materiel Command, USAF, under agreement number F30602-01-2-0537.
 *
 */

#ifndef _CRYPTO_CRYPTO_H_
#define _CRYPTO_CRYPTO_H_

#include <sys/ioccom.h>
#include <sys/_task.h>

/* Some initial values */
#define CRYPTO_DRIVERS_INITIAL	4
#define CRYPTO_SW_SESSIONS	32

/* Hash values */
#define	NULL_HASH_LEN		16
#define	MD5_HASH_LEN		16
#define	SHA1_HASH_LEN		20
#define	RIPEMD160_HASH_LEN	20
#define	SHA2_256_HASH_LEN	32
#define	SHA2_384_HASH_LEN	48
#define	SHA2_512_HASH_LEN	64
#define	MD5_KPDK_HASH_LEN	16
#define	SHA1_KPDK_HASH_LEN	20
#define	AES_GMAC_HASH_LEN	16
/* Maximum hash algorithm result length */
#define	HASH_MAX_LEN		SHA2_512_HASH_LEN /* Keep this updated */

#define	MD5_BLOCK_LEN		64
#define	SHA1_BLOCK_LEN		64
#define	RIPEMD160_BLOCK_LEN	64
#define	SHA2_256_BLOCK_LEN	64
#define	SHA2_384_BLOCK_LEN	128
#define	SHA2_512_BLOCK_LEN	128

/* HMAC values */
#define	NULL_HMAC_BLOCK_LEN		64
/* Maximum HMAC block length */
#define	HMAC_MAX_BLOCK_LEN	SHA2_512_BLOCK_LEN /* Keep this updated */
#define	HMAC_IPAD_VAL			0x36
#define	HMAC_OPAD_VAL			0x5C
/* HMAC Key Length */
#define	AES_128_GMAC_KEY_LEN		16
#define	AES_192_GMAC_KEY_LEN		24
#define	AES_256_GMAC_KEY_LEN		32

/* Encryption algorithm block sizes */
#define	NULL_BLOCK_LEN		4	/* IPsec to maintain alignment */
#define	DES_BLOCK_LEN		8
#define	DES3_BLOCK_LEN		8
#define	BLOWFISH_BLOCK_LEN	8
#define	SKIPJACK_BLOCK_LEN	8
#define	CAST128_BLOCK_LEN	8
#define	RIJNDAEL128_BLOCK_LEN	16
#define	AES_BLOCK_LEN		16
#define	AES_ICM_BLOCK_LEN	1
#define	ARC4_BLOCK_LEN		1
#define	CAMELLIA_BLOCK_LEN	16
#define	CHACHA20_NATIVE_BLOCK_LEN	64
#define	EALG_MAX_BLOCK_LEN	CHACHA20_NATIVE_BLOCK_LEN /* Keep this updated */

/* IV Lengths */

#define	ARC4_IV_LEN		1
#define	AES_GCM_IV_LEN		12
#define	AES_XTS_IV_LEN		8
#define	AES_XTS_ALPHA		0x87	/* GF(2^128) generator polynomial */

/* Min and Max Encryption Key Sizes */
#define	NULL_MIN_KEY		0
#define	NULL_MAX_KEY		256 /* 2048 bits, max key */
#define	DES_MIN_KEY		8
#define	DES_MAX_KEY		DES_MIN_KEY
#define	TRIPLE_DES_MIN_KEY	24
#define	TRIPLE_DES_MAX_KEY	TRIPLE_DES_MIN_KEY
#define	BLOWFISH_MIN_KEY	5
#define	BLOWFISH_MAX_KEY	56 /* 448 bits, max key */
#define	CAST_MIN_KEY		5
#define	CAST_MAX_KEY		16
#define	SKIPJACK_MIN_KEY	10
#define	SKIPJACK_MAX_KEY	SKIPJACK_MIN_KEY
#define	RIJNDAEL_MIN_KEY	16
#define	RIJNDAEL_MAX_KEY	32
#define	AES_MIN_KEY		RIJNDAEL_MIN_KEY
#define	AES_MAX_KEY		RIJNDAEL_MAX_KEY
#define	AES_XTS_MIN_KEY		(2 * AES_MIN_KEY)
#define	AES_XTS_MAX_KEY		(2 * AES_MAX_KEY)
#define	ARC4_MIN_KEY		1
#define	ARC4_MAX_KEY		32
#define	CAMELLIA_MIN_KEY	8
#define	CAMELLIA_MAX_KEY	32

/* Maximum hash algorithm result length */
#define	AALG_MAX_RESULT_LEN	64 /* Keep this updated */

#define	CRYPTO_ALGORITHM_MIN	1
#define	CRYPTO_DES_CBC		1
#define	CRYPTO_3DES_CBC		2
#define	CRYPTO_BLF_CBC		3
#define	CRYPTO_CAST_CBC		4
#define	CRYPTO_SKIPJACK_CBC	5
#define	CRYPTO_MD5_HMAC		6
#define	CRYPTO_SHA1_HMAC	7
#define	CRYPTO_RIPEMD160_HMAC	8
#define	CRYPTO_MD5_KPDK		9
#define	CRYPTO_SHA1_KPDK	10
#define	CRYPTO_RIJNDAEL128_CBC	11 /* 128 bit blocksize */
#define	CRYPTO_AES_CBC		11 /* 128 bit blocksize -- the same as above */
#define	CRYPTO_ARC4		12
#define	CRYPTO_MD5		13
#define	CRYPTO_SHA1		14
#define	CRYPTO_NULL_HMAC	15
#define	CRYPTO_NULL_CBC		16
#define	CRYPTO_DEFLATE_COMP	17 /* Deflate compression algorithm */
#define	CRYPTO_SHA2_256_HMAC	18
#define	CRYPTO_SHA2_384_HMAC	19
#define	CRYPTO_SHA2_512_HMAC	20
#define	CRYPTO_CAMELLIA_CBC	21
#define	CRYPTO_AES_XTS		22
#define	CRYPTO_AES_ICM		23 /* commonly known as CTR mode */
#define	CRYPTO_AES_NIST_GMAC	24 /* cipher side */
#define	CRYPTO_AES_NIST_GCM_16	25 /* 16 byte ICV */
#define	CRYPTO_AES_128_NIST_GMAC 26 /* auth side */
#define	CRYPTO_AES_192_NIST_GMAC 27 /* auth side */
#define	CRYPTO_AES_256_NIST_GMAC 28 /* auth side */
#define	CRYPTO_BLAKE2B		29 /* Blake2b hash */
#define	CRYPTO_BLAKE2S		30 /* Blake2s hash */
#define	CRYPTO_CHACHA20		31 /* Chacha20 stream cipher */
#define	CRYPTO_ALGORITHM_MAX	31 /* Keep updated - see below */

#define	CRYPTO_ALGO_VALID(x)	((x) >= CRYPTO_ALGORITHM_MIN && \
				 (x) <= CRYPTO_ALGORITHM_MAX)

/* Algorithm flags */
#define	CRYPTO_ALG_FLAG_SUPPORTED	0x01 /* Algorithm is supported */
#define	CRYPTO_ALG_FLAG_RNG_ENABLE	0x02 /* Has HW RNG for DH/DSA */
#define	CRYPTO_ALG_FLAG_DSA_SHA		0x04 /* Can do SHA on msg */

/*
 * Crypto driver/device flags.  They can set in the crid
 * parameter when creating a session or submitting a key
 * op to affect the device/driver assigned.  If neither
 * of these are specified then the crid is assumed to hold
 * the driver id of an existing (and suitable) device that
 * must be used to satisfy the request.
 */
#define CRYPTO_FLAG_HARDWARE	0x01000000	/* hardware accelerated */
#define CRYPTO_FLAG_SOFTWARE	0x02000000	/* software implementation */

/* NB: deprecated */
struct session_op {
	u_int32_t	cipher;		/* ie. CRYPTO_DES_CBC */
	u_int32_t	mac;		/* ie. CRYPTO_MD5_HMAC */

	u_int32_t	keylen;		/* cipher key */
	c_caddr_t	key;
	int		mackeylen;	/* mac key */
	c_caddr_t	mackey;

  	u_int32_t	ses;		/* returns: session # */
};

struct session2_op {
	u_int32_t	cipher;		/* ie. CRYPTO_DES_CBC */
	u_int32_t	mac;		/* ie. CRYPTO_MD5_HMAC */

	u_int32_t	keylen;		/* cipher key */
	c_caddr_t	key;
	int		mackeylen;	/* mac key */
	c_caddr_t	mackey;

  	u_int32_t	ses;		/* returns: session # */
	int		crid;		/* driver id + flags (rw) */
	int		pad[4];		/* for future expansion */
};

struct crypt_op {
	u_int32_t	ses;
	u_int16_t	op;		/* i.e. COP_ENCRYPT */
#define COP_ENCRYPT	1
#define COP_DECRYPT	2
	u_int16_t	flags;
#define	COP_F_CIPHER_FIRST	0x0001	/* Cipher before MAC. */
#define	COP_F_BATCH		0x0008	/* Batch op if possible */
	u_int		len;
	c_caddr_t	src;		/* become iov[] inside kernel */
	caddr_t		dst;
	caddr_t		mac;		/* must be big enough for chosen MAC */
	c_caddr_t	iv;
};

/* op and flags the same as crypt_op */
struct crypt_aead {
	u_int32_t	ses;
	u_int16_t	op;		/* i.e. COP_ENCRYPT */
	u_int16_t	flags;
	u_int		len;
	u_int		aadlen;
	u_int		ivlen;
	c_caddr_t	src;		/* become iov[] inside kernel */
	caddr_t		dst;
	c_caddr_t	aad;		/* additional authenticated data */
	caddr_t		tag;		/* must fit for chosen TAG length */
	c_caddr_t	iv;
};

/*
 * Parameters for looking up a crypto driver/device by
 * device name or by id.  The latter are returned for
 * created sessions (crid) and completed key operations.
 */
struct crypt_find_op {
	int		crid;		/* driver id + flags */
	char		name[32];	/* device/driver name */
};

/* bignum parameter, in packed bytes, ... */
struct crparam {
	caddr_t		crp_p;
	u_int		crp_nbits;
};

#define CRK_MAXPARAM	8

struct crypt_kop {
	u_int		crk_op;		/* ie. CRK_MOD_EXP or other */
	u_int		crk_status;	/* return status */
	u_short		crk_iparams;	/* # of input parameters */
	u_short		crk_oparams;	/* # of output parameters */
	u_int		crk_crid;	/* NB: only used by CIOCKEY2 (rw) */
	struct crparam	crk_param[CRK_MAXPARAM];
};
#define	CRK_ALGORITM_MIN	0
#define CRK_MOD_EXP		0
#define CRK_MOD_EXP_CRT		1
#define CRK_DSA_SIGN		2
#define CRK_DSA_VERIFY		3
#define CRK_DH_COMPUTE_KEY	4
#define CRK_ALGORITHM_MAX	4 /* Keep updated - see below */

#define CRF_MOD_EXP		(1 << CRK_MOD_EXP)
#define CRF_MOD_EXP_CRT		(1 << CRK_MOD_EXP_CRT)
#define CRF_DSA_SIGN		(1 << CRK_DSA_SIGN)
#define CRF_DSA_VERIFY		(1 << CRK_DSA_VERIFY)
#define CRF_DH_COMPUTE_KEY	(1 << CRK_DH_COMPUTE_KEY)

/*
 * done against open of /dev/crypto, to get a cloned descriptor.
 * Please use F_SETFD against the cloned descriptor.
 */
#define	CRIOGET		_IOWR('c', 100, u_int32_t)
#define	CRIOASYMFEAT	CIOCASYMFEAT
#define	CRIOFINDDEV	CIOCFINDDEV

/* the following are done against the cloned descriptor */
#define	CIOCGSESSION	_IOWR('c', 101, struct session_op)
#define	CIOCFSESSION	_IOW('c', 102, u_int32_t)
#define CIOCCRYPT	_IOWR('c', 103, struct crypt_op)
#define CIOCKEY		_IOWR('c', 104, struct crypt_kop)
#define CIOCASYMFEAT	_IOR('c', 105, u_int32_t)
#define	CIOCGSESSION2	_IOWR('c', 106, struct session2_op)
#define	CIOCKEY2	_IOWR('c', 107, struct crypt_kop)
#define	CIOCFINDDEV	_IOWR('c', 108, struct crypt_find_op)
#define	CIOCCRYPTAEAD	_IOWR('c', 109, struct crypt_aead)

struct cryptotstat {
	struct timespec	acc;		/* total accumulated time */
	struct timespec	min;		/* min time */
	struct timespec	max;		/* max time */
	u_int32_t	count;		/* number of observations */
};

struct cryptostats {
	u_int32_t	cs_ops;		/* symmetric crypto ops submitted */
	u_int32_t	cs_errs;	/* symmetric crypto ops that failed */
	u_int32_t	cs_kops;	/* asymetric/key ops submitted */
	u_int32_t	cs_kerrs;	/* asymetric/key ops that failed */
	u_int32_t	cs_intrs;	/* crypto swi thread activations */
	u_int32_t	cs_rets;	/* crypto return thread activations */
	u_int32_t	cs_blocks;	/* symmetric op driver block */
	u_int32_t	cs_kblocks;	/* symmetric op driver block */
	/*
	 * When CRYPTO_TIMING is defined at compile time and the
	 * sysctl debug.crypto is set to 1, the crypto system will
	 * accumulate statistics about how long it takes to process
	 * crypto requests at various points during processing.
	 */
	struct cryptotstat cs_invoke;	/* crypto_dipsatch -> crypto_invoke */
	struct cryptotstat cs_done;	/* crypto_invoke -> crypto_done */
	struct cryptotstat cs_cb;	/* crypto_done -> callback */
	struct cryptotstat cs_finis;	/* callback -> callback return */
};

#ifdef _KERNEL

#if 0
#define CRYPTDEB(s, ...) do {						\
	printf("%s:%d: " s "\n", __FILE__, __LINE__, ## __VA_ARGS__);	\
} while (0)
#else
#define CRYPTDEB(...)	do { } while (0)
#endif

/* Standard initialization structure beginning */
struct cryptoini {
	int		cri_alg;	/* Algorithm to use */
	int		cri_klen;	/* Key length, in bits */
	int		cri_mlen;	/* Number of bytes we want from the
					   entire hash. 0 means all. */
	caddr_t		cri_key;	/* key to use */
	u_int8_t	cri_iv[EALG_MAX_BLOCK_LEN];	/* IV to use */
	struct cryptoini *cri_next;
};

/* Describe boundaries of a single crypto operation */
struct cryptodesc {
	int		crd_skip;	/* How many bytes to ignore from start */
	int		crd_len;	/* How many bytes to process */
	int		crd_inject;	/* Where to inject results, if applicable */
	int		crd_flags;

#define	CRD_F_ENCRYPT		0x01	/* Set when doing encryption */
#define	CRD_F_IV_PRESENT	0x02	/* When encrypting, IV is already in
					   place, so don't copy. */
#define	CRD_F_IV_EXPLICIT	0x04	/* IV explicitly provided */
#define	CRD_F_DSA_SHA_NEEDED	0x08	/* Compute SHA-1 of buffer for DSA */
#define	CRD_F_COMP		0x0f    /* Set when doing compression */
#define	CRD_F_KEY_EXPLICIT	0x10	/* Key explicitly provided */

	struct cryptoini	CRD_INI; /* Initialization/context data */
#define	crd_esn		CRD_INI.cri_esn
#define	crd_iv		CRD_INI.cri_iv
#define	crd_key		CRD_INI.cri_key
#define	crd_alg		CRD_INI.cri_alg
#define	crd_klen	CRD_INI.cri_klen

	struct cryptodesc *crd_next;
};

/* Structure describing complete operation */
struct cryptop {
	TAILQ_ENTRY(cryptop) crp_next;

	struct task	crp_task;

	u_int64_t	crp_sid;	/* Session ID */
	int		crp_ilen;	/* Input data total length */
	int		crp_olen;	/* Result total length */

	int		crp_etype;	/*
					 * Error type (zero means no error).
					 * All error codes except EAGAIN
					 * indicate possible data corruption (as in,
					 * the data have been touched). On all
					 * errors, the crp_sid may have changed
					 * (reset to a new one), so the caller
					 * should always check and use the new
					 * value on future requests.
					 */
	int		crp_flags;

#define	CRYPTO_F_IMBUF		0x0001	/* Input/output are mbuf chains */
#define	CRYPTO_F_IOV		0x0002	/* Input/output are uio */
#define	CRYPTO_F_BATCH		0x0008	/* Batch op if possible */
#define	CRYPTO_F_CBIMM		0x0010	/* Do callback immediately */
#define	CRYPTO_F_DONE		0x0020	/* Operation completed */
#define	CRYPTO_F_CBIFSYNC	0x0040	/* Do CBIMM if op is synchronous */
#define	CRYPTO_F_ASYNC		0x0080	/* Dispatch crypto jobs on several threads
					 * if op is synchronous
					 */
#define	CRYPTO_F_ASYNC_KEEPORDER	0x0100	/*
					 * Dispatch the crypto jobs in the same
					 * order there are submitted. Applied only
					 * if CRYPTO_F_ASYNC flags is set
					 */

	union {
		caddr_t		crp_buf;	/* Data to be processed */
		struct mbuf	*crp_mbuf;
		struct uio	*crp_uio;
	};
	void *		crp_opaque;	/* Opaque pointer, passed along */
	struct cryptodesc *crp_desc;	/* Linked list of processing descriptors */

	int (*crp_callback)(struct cryptop *); /* Callback function */

	struct bintime	crp_tstamp;	/* performance time stamp */
	uint32_t	crp_seq;	/* used for ordered dispatch */
	uint32_t	crp_retw_id;	/*
					 * the return worker to be used,
					 *  used for ordered dispatch
					 */
};

#define	CRYPTOP_ASYNC(crp) \
	(((crp)->crp_flags & CRYPTO_F_ASYNC) && \
	CRYPTO_SESID2CAPS((crp)->crp_sid) & CRYPTOCAP_F_SYNC)
#define	CRYPTOP_ASYNC_KEEPORDER(crp) \
	(CRYPTOP_ASYNC(crp) && \
	(crp)->crp_flags & CRYPTO_F_ASYNC_KEEPORDER)

#define	CRYPTO_BUF_CONTIG	0x0
#define	CRYPTO_BUF_IOV		0x1
#define	CRYPTO_BUF_MBUF		0x2

#define	CRYPTO_OP_DECRYPT	0x0
#define	CRYPTO_OP_ENCRYPT	0x1

/*
 * Hints passed to process methods.
 */
#define	CRYPTO_HINT_MORE	0x1	/* more ops coming shortly */

struct cryptkop {
	TAILQ_ENTRY(cryptkop) krp_next;

	u_int		krp_op;		/* ie. CRK_MOD_EXP or other */
	u_int		krp_status;	/* return status */
	u_short		krp_iparams;	/* # of input parameters */
	u_short		krp_oparams;	/* # of output parameters */
	u_int		krp_crid;	/* desired device, etc. */
	u_int32_t	krp_hid;
	struct crparam	krp_param[CRK_MAXPARAM];	/* kvm */
	int		(*krp_callback)(struct cryptkop *);
};

/*
 * Session ids are 64 bits.  The lower 32 bits contain a "local id" which
 * is a driver-private session identifier.  The upper 32 bits contain a
 * "hardware id" used by the core crypto code to identify the driver and
 * a copy of the driver's capabilities that can be used by client code to
 * optimize operation.
 */
#define	CRYPTO_SESID2HID(_sid)	(((_sid) >> 32) & 0x00ffffff)
#define	CRYPTO_SESID2CAPS(_sid)	(((_sid) >> 32) & 0xff000000)
#define	CRYPTO_SESID2LID(_sid)	(((u_int32_t) (_sid)) & 0xffffffff)

MALLOC_DECLARE(M_CRYPTO_DATA);

extern	int crypto_newsession(u_int64_t *sid, struct cryptoini *cri, int hard);
extern	int crypto_freesession(u_int64_t sid);
#define	CRYPTOCAP_F_HARDWARE	CRYPTO_FLAG_HARDWARE
#define	CRYPTOCAP_F_SOFTWARE	CRYPTO_FLAG_SOFTWARE
#define	CRYPTOCAP_F_SYNC	0x04000000	/* operates synchronously */
extern	int32_t crypto_get_driverid(device_t dev, int flags);
extern	int crypto_find_driver(const char *);
extern	device_t crypto_find_device_byhid(int hid);
extern	int crypto_getcaps(int hid);
extern	int crypto_register(u_int32_t driverid, int alg, u_int16_t maxoplen,
	    u_int32_t flags);
extern	int crypto_kregister(u_int32_t, int, u_int32_t);
extern	int crypto_unregister(u_int32_t driverid, int alg);
extern	int crypto_unregister_all(u_int32_t driverid);
extern	int crypto_dispatch(struct cryptop *crp);
extern	int crypto_kdispatch(struct cryptkop *);
#define	CRYPTO_SYMQ	0x1
#define	CRYPTO_ASYMQ	0x2
extern	int crypto_unblock(u_int32_t, int);
extern	void crypto_done(struct cryptop *crp);
extern	void crypto_kdone(struct cryptkop *);
extern	int crypto_getfeat(int *);

extern	void crypto_freereq(struct cryptop *crp);
extern	struct cryptop *crypto_getreq(int num);

extern	int crypto_usercrypto;		/* userland may do crypto requests */
extern	int crypto_userasymcrypto;	/* userland may do asym crypto reqs */
extern	int crypto_devallowsoft;	/* only use hardware crypto */

/*
 * Crypto-related utility routines used mainly by drivers.
 *
 * XXX these don't really belong here; but for now they're
 *     kept apart from the rest of the system.
 */
struct uio;
extern	void cuio_copydata(struct uio* uio, int off, int len, caddr_t cp);
extern	void cuio_copyback(struct uio* uio, int off, int len, c_caddr_t cp);
extern	int cuio_getptr(struct uio *uio, int loc, int *off);
extern	int cuio_apply(struct uio *uio, int off, int len,
	    int (*f)(void *, void *, u_int), void *arg);

struct mbuf;
struct iovec;
extern	int crypto_mbuftoiov(struct mbuf *mbuf, struct iovec **iovptr,
	    int *cnt, int *allocated);

extern	void crypto_copyback(int flags, caddr_t buf, int off, int size,
	    c_caddr_t in);
extern	void crypto_copydata(int flags, caddr_t buf, int off, int size,
	    caddr_t out);
extern	int crypto_apply(int flags, caddr_t buf, int off, int len,
	    int (*f)(void *, void *, u_int), void *arg);

#endif /* _KERNEL */
#endif /* _CRYPTO_CRYPTO_H_ */