1 /* $FreeBSD$ */ 2 /* $KAME: mld6.c,v 1.27 2001/04/04 05:17:30 itojun Exp $ */ 3 4 /* 5 * Copyright (C) 1998 WIDE Project. 6 * All rights reserved. 7 * 8 * Redistribution and use in source and binary forms, with or without 9 * modification, are permitted provided that the following conditions 10 * are met: 11 * 1. Redistributions of source code must retain the above copyright 12 * notice, this list of conditions and the following disclaimer. 13 * 2. Redistributions in binary form must reproduce the above copyright 14 * notice, this list of conditions and the following disclaimer in the 15 * documentation and/or other materials provided with the distribution. 16 * 3. Neither the name of the project nor the names of its contributors 17 * may be used to endorse or promote products derived from this software 18 * without specific prior written permission. 19 * 20 * THIS SOFTWARE IS PROVIDED BY THE PROJECT AND CONTRIBUTORS ``AS IS'' AND 21 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE 22 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE 23 * ARE DISCLAIMED. IN NO EVENT SHALL THE PROJECT OR CONTRIBUTORS BE LIABLE 24 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL 25 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS 26 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) 27 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT 28 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY 29 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF 30 * SUCH DAMAGE. 31 */ 32 33 /* 34 * Copyright (c) 1988 Stephen Deering. 35 * Copyright (c) 1992, 1993 36 * The Regents of the University of California. All rights reserved. 37 * 38 * This code is derived from software contributed to Berkeley by 39 * Stephen Deering of Stanford University. 40 * 41 * Redistribution and use in source and binary forms, with or without 42 * modification, are permitted provided that the following conditions 43 * are met: 44 * 1. Redistributions of source code must retain the above copyright 45 * notice, this list of conditions and the following disclaimer. 46 * 2. Redistributions in binary form must reproduce the above copyright 47 * notice, this list of conditions and the following disclaimer in the 48 * documentation and/or other materials provided with the distribution. 49 * 3. All advertising materials mentioning features or use of this software 50 * must display the following acknowledgement: 51 * This product includes software developed by the University of 52 * California, Berkeley and its contributors. 53 * 4. Neither the name of the University nor the names of its contributors 54 * may be used to endorse or promote products derived from this software 55 * without specific prior written permission. 56 * 57 * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND 58 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE 59 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE 60 * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE 61 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL 62 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS 63 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) 64 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT 65 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY 66 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF 67 * SUCH DAMAGE. 68 * 69 * @(#)igmp.c 8.1 (Berkeley) 7/19/93 70 */ 71 72 #include "opt_inet.h" 73 #include "opt_inet6.h" 74 75 #include <sys/param.h> 76 #include <sys/systm.h> 77 #include <sys/mbuf.h> 78 #include <sys/socket.h> 79 #include <sys/protosw.h> 80 #include <sys/syslog.h> 81 82 #include <net/if.h> 83 84 #include <netinet/in.h> 85 #include <netinet/in_var.h> 86 #include <netinet/ip6.h> 87 #include <netinet6/ip6_var.h> 88 #include <netinet/icmp6.h> 89 #include <netinet6/mld6_var.h> 90 91 #include <net/net_osdep.h> 92 93 /* 94 * Protocol constants 95 */ 96 97 /* denotes that the MLD max response delay field specifies time in milliseconds */ 98 #define MLD6_TIMER_SCALE 1000 99 /* 100 * time between repetitions of a node's initial report of interest in a 101 * multicast address(in seconds) 102 */ 103 #define MLD6_UNSOLICITED_REPORT_INTERVAL 10 104 105 static struct ip6_pktopts ip6_opts; 106 static int mld6_timers_are_running; 107 /* XXX: These are necessary for KAME's link-local hack */ 108 static struct in6_addr mld6_all_nodes_linklocal = IN6ADDR_LINKLOCAL_ALLNODES_INIT; 109 static struct in6_addr mld6_all_routers_linklocal = IN6ADDR_LINKLOCAL_ALLROUTERS_INIT; 110 111 static void mld6_sendpkt __P((struct in6_multi *, int, const struct in6_addr *)); 112 113 void 114 mld6_init() 115 { 116 static u_int8_t hbh_buf[8]; 117 struct ip6_hbh *hbh = (struct ip6_hbh *)hbh_buf; 118 u_int16_t rtalert_code = htons((u_int16_t)IP6OPT_RTALERT_MLD); 119 120 mld6_timers_are_running = 0; 121 122 /* ip6h_nxt will be fill in later */ 123 hbh->ip6h_len = 0; /* (8 >> 3) - 1 */ 124 125 /* XXX: grotty hard coding... */ 126 hbh_buf[2] = IP6OPT_PADN; /* 2 byte padding */ 127 hbh_buf[3] = 0; 128 hbh_buf[4] = IP6OPT_RTALERT; 129 hbh_buf[5] = IP6OPT_RTALERT_LEN - 2; 130 bcopy((caddr_t)&rtalert_code, &hbh_buf[6], sizeof(u_int16_t)); 131 132 init_ip6pktopts(&ip6_opts); 133 ip6_opts.ip6po_hbh = hbh; 134 } 135 136 void 137 mld6_start_listening(in6m) 138 struct in6_multi *in6m; 139 { 140 int s = splnet(); 141 142 /* 143 * RFC2710 page 10: 144 * The node never sends a Report or Done for the link-scope all-nodes 145 * address. 146 * MLD messages are never sent for multicast addresses whose scope is 0 147 * (reserved) or 1 (node-local). 148 */ 149 mld6_all_nodes_linklocal.s6_addr16[1] = 150 htons(in6m->in6m_ifp->if_index); /* XXX */ 151 if (IN6_ARE_ADDR_EQUAL(&in6m->in6m_addr, &mld6_all_nodes_linklocal) || 152 IPV6_ADDR_MC_SCOPE(&in6m->in6m_addr) < IPV6_ADDR_SCOPE_LINKLOCAL) { 153 in6m->in6m_timer = 0; 154 in6m->in6m_state = MLD6_OTHERLISTENER; 155 } else { 156 mld6_sendpkt(in6m, MLD6_LISTENER_REPORT, NULL); 157 in6m->in6m_timer = MLD6_RANDOM_DELAY( 158 MLD6_UNSOLICITED_REPORT_INTERVAL * PR_FASTHZ); 159 in6m->in6m_state = MLD6_IREPORTEDLAST; 160 mld6_timers_are_running = 1; 161 } 162 splx(s); 163 } 164 165 void 166 mld6_stop_listening(in6m) 167 struct in6_multi *in6m; 168 { 169 mld6_all_nodes_linklocal.s6_addr16[1] = 170 htons(in6m->in6m_ifp->if_index); /* XXX */ 171 mld6_all_routers_linklocal.s6_addr16[1] = 172 htons(in6m->in6m_ifp->if_index); /* XXX: necessary when mrouting */ 173 174 if (in6m->in6m_state == MLD6_IREPORTEDLAST && 175 (!IN6_ARE_ADDR_EQUAL(&in6m->in6m_addr, &mld6_all_nodes_linklocal)) && 176 IPV6_ADDR_MC_SCOPE(&in6m->in6m_addr) > IPV6_ADDR_SCOPE_NODELOCAL) 177 mld6_sendpkt(in6m, MLD6_LISTENER_DONE, 178 &mld6_all_routers_linklocal); 179 } 180 181 void 182 mld6_input(m, off) 183 struct mbuf *m; 184 int off; 185 { 186 struct ip6_hdr *ip6 = mtod(m, struct ip6_hdr *); 187 struct mld6_hdr *mldh; 188 struct ifnet *ifp = m->m_pkthdr.rcvif; 189 struct in6_multi *in6m; 190 struct in6_ifaddr *ia; 191 struct ifmultiaddr *ifma; 192 int timer; /* timer value in the MLD query header */ 193 194 #ifndef PULLDOWN_TEST 195 IP6_EXTHDR_CHECK(m, off, sizeof(*mldh),); 196 mldh = (struct mld6_hdr *)(mtod(m, caddr_t) + off); 197 #else 198 IP6_EXTHDR_GET(mldh, struct mld6_hdr *, m, off, sizeof(*mldh)); 199 if (mldh == NULL) { 200 icmp6stat.icp6s_tooshort++; 201 return; 202 } 203 #endif 204 205 /* source address validation */ 206 ip6 = mtod(m, struct ip6_hdr *);/* in case mpullup */ 207 if (!IN6_IS_ADDR_LINKLOCAL(&ip6->ip6_src)) { 208 log(LOG_ERR, 209 "mld6_input: src %s is not link-local (grp=%s)\n", 210 ip6_sprintf(&ip6->ip6_src), 211 ip6_sprintf(&mldh->mld6_addr)); 212 /* 213 * spec (RFC2710) does not explicitly 214 * specify to discard the packet from a non link-local 215 * source address. But we believe it's expected to do so. 216 * XXX: do we have to allow :: as source? 217 */ 218 m_freem(m); 219 return; 220 } 221 222 /* 223 * In the MLD6 specification, there are 3 states and a flag. 224 * 225 * In Non-Listener state, we simply don't have a membership record. 226 * In Delaying Listener state, our timer is running (in6m->in6m_timer) 227 * In Idle Listener state, our timer is not running (in6m->in6m_timer==0) 228 * 229 * The flag is in6m->in6m_state, it is set to MLD6_OTHERLISTENER if 230 * we have heard a report from another member, or MLD6_IREPORTEDLAST 231 * if we sent the last report. 232 */ 233 switch(mldh->mld6_type) { 234 case MLD6_LISTENER_QUERY: 235 if (ifp->if_flags & IFF_LOOPBACK) 236 break; 237 238 if (!IN6_IS_ADDR_UNSPECIFIED(&mldh->mld6_addr) && 239 !IN6_IS_ADDR_MULTICAST(&mldh->mld6_addr)) 240 break; /* print error or log stat? */ 241 if (IN6_IS_ADDR_MC_LINKLOCAL(&mldh->mld6_addr)) 242 mldh->mld6_addr.s6_addr16[1] = 243 htons(ifp->if_index); /* XXX */ 244 245 /* 246 * - Start the timers in all of our membership records 247 * that the query applies to for the interface on 248 * which the query arrived excl. those that belong 249 * to the "all-nodes" group (ff02::1). 250 * - Restart any timer that is already running but has 251 * A value longer than the requested timeout. 252 * - Use the value specified in the query message as 253 * the maximum timeout. 254 */ 255 IFP_TO_IA6(ifp, ia); 256 if (ia == NULL) 257 break; 258 259 /* 260 * XXX: System timer resolution is too low to handle Max 261 * Response Delay, so set 1 to the internal timer even if 262 * the calculated value equals to zero when Max Response 263 * Delay is positive. 264 */ 265 timer = ntohs(mldh->mld6_maxdelay)*PR_FASTHZ/MLD6_TIMER_SCALE; 266 if (timer == 0 && mldh->mld6_maxdelay) 267 timer = 1; 268 mld6_all_nodes_linklocal.s6_addr16[1] = 269 htons(ifp->if_index); /* XXX */ 270 271 TAILQ_FOREACH(ifma, &ifp->if_multiaddrs, ifma_link) 272 { 273 if (ifma->ifma_addr->sa_family != AF_INET6) 274 continue; 275 in6m = (struct in6_multi *)ifma->ifma_protospec; 276 if (IN6_ARE_ADDR_EQUAL(&in6m->in6m_addr, 277 &mld6_all_nodes_linklocal) || 278 IPV6_ADDR_MC_SCOPE(&in6m->in6m_addr) < 279 IPV6_ADDR_SCOPE_LINKLOCAL) 280 continue; 281 282 if (IN6_IS_ADDR_UNSPECIFIED(&mldh->mld6_addr) || 283 IN6_ARE_ADDR_EQUAL(&mldh->mld6_addr, 284 &in6m->in6m_addr)) 285 { 286 if (timer == 0) { 287 /* send a report immediately */ 288 mld6_sendpkt(in6m, MLD6_LISTENER_REPORT, 289 NULL); 290 in6m->in6m_timer = 0; /* reset timer */ 291 in6m->in6m_state = MLD6_IREPORTEDLAST; 292 } 293 else if (in6m->in6m_timer == 0 || /*idle state*/ 294 in6m->in6m_timer > timer) { 295 in6m->in6m_timer = 296 MLD6_RANDOM_DELAY(timer); 297 mld6_timers_are_running = 1; 298 } 299 } 300 } 301 302 if (IN6_IS_ADDR_MC_LINKLOCAL(&mldh->mld6_addr)) 303 mldh->mld6_addr.s6_addr16[1] = 0; /* XXX */ 304 break; 305 case MLD6_LISTENER_REPORT: 306 /* 307 * For fast leave to work, we have to know that we are the 308 * last person to send a report for this group. Reports 309 * can potentially get looped back if we are a multicast 310 * router, so discard reports sourced by me. 311 * Note that it is impossible to check IFF_LOOPBACK flag of 312 * ifp for this purpose, since ip6_mloopback pass the physical 313 * interface to looutput. 314 */ 315 if (m->m_flags & M_LOOP) /* XXX: grotty flag, but efficient */ 316 break; 317 318 if (!IN6_IS_ADDR_MULTICAST(&mldh->mld6_addr)) 319 break; 320 321 if (IN6_IS_ADDR_MC_LINKLOCAL(&mldh->mld6_addr)) 322 mldh->mld6_addr.s6_addr16[1] = 323 htons(ifp->if_index); /* XXX */ 324 /* 325 * If we belong to the group being reported, stop 326 * our timer for that group. 327 */ 328 IN6_LOOKUP_MULTI(mldh->mld6_addr, ifp, in6m); 329 if (in6m) { 330 in6m->in6m_timer = 0; /* transit to idle state */ 331 in6m->in6m_state = MLD6_OTHERLISTENER; /* clear flag */ 332 } 333 334 if (IN6_IS_ADDR_MC_LINKLOCAL(&mldh->mld6_addr)) 335 mldh->mld6_addr.s6_addr16[1] = 0; /* XXX */ 336 break; 337 default: /* this is impossible */ 338 log(LOG_ERR, "mld6_input: illegal type(%d)", mldh->mld6_type); 339 break; 340 } 341 342 m_freem(m); 343 } 344 345 void 346 mld6_fasttimeo() 347 { 348 struct in6_multi *in6m; 349 struct in6_multistep step; 350 int s; 351 352 /* 353 * Quick check to see if any work needs to be done, in order 354 * to minimize the overhead of fasttimo processing. 355 */ 356 if (!mld6_timers_are_running) 357 return; 358 359 s = splnet(); 360 mld6_timers_are_running = 0; 361 IN6_FIRST_MULTI(step, in6m); 362 while (in6m != NULL) { 363 if (in6m->in6m_timer == 0) { 364 /* do nothing */ 365 } else if (--in6m->in6m_timer == 0) { 366 mld6_sendpkt(in6m, MLD6_LISTENER_REPORT, NULL); 367 in6m->in6m_state = MLD6_IREPORTEDLAST; 368 } else { 369 mld6_timers_are_running = 1; 370 } 371 IN6_NEXT_MULTI(step, in6m); 372 } 373 splx(s); 374 } 375 376 static void 377 mld6_sendpkt(in6m, type, dst) 378 struct in6_multi *in6m; 379 int type; 380 const struct in6_addr *dst; 381 { 382 struct mbuf *mh, *md; 383 struct mld6_hdr *mldh; 384 struct ip6_hdr *ip6; 385 struct ip6_moptions im6o; 386 struct in6_ifaddr *ia; 387 struct ifnet *ifp = in6m->in6m_ifp; 388 struct ifnet *outif = NULL; 389 390 /* 391 * At first, find a link local address on the outgoing interface 392 * to use as the source address of the MLD packet. 393 */ 394 if ((ia = in6ifa_ifpforlinklocal(ifp, IN6_IFF_NOTREADY|IN6_IFF_ANYCAST)) 395 == NULL) 396 return; 397 398 /* 399 * Allocate mbufs to store ip6 header and MLD header. 400 * We allocate 2 mbufs and make chain in advance because 401 * it is more convenient when inserting the hop-by-hop option later. 402 */ 403 MGETHDR(mh, M_DONTWAIT, MT_HEADER); 404 if (mh == NULL) 405 return; 406 MGET(md, M_DONTWAIT, MT_DATA); 407 if (md == NULL) { 408 m_free(mh); 409 return; 410 } 411 mh->m_next = md; 412 413 mh->m_pkthdr.rcvif = NULL; 414 mh->m_pkthdr.len = sizeof(struct ip6_hdr) + sizeof(struct mld6_hdr); 415 mh->m_len = sizeof(struct ip6_hdr); 416 MH_ALIGN(mh, sizeof(struct ip6_hdr)); 417 418 /* fill in the ip6 header */ 419 ip6 = mtod(mh, struct ip6_hdr *); 420 ip6->ip6_flow = 0; 421 ip6->ip6_vfc &= ~IPV6_VERSION_MASK; 422 ip6->ip6_vfc |= IPV6_VERSION; 423 /* ip6_plen will be set later */ 424 ip6->ip6_nxt = IPPROTO_ICMPV6; 425 /* ip6_hlim will be set by im6o.im6o_multicast_hlim */ 426 ip6->ip6_src = ia->ia_addr.sin6_addr; 427 ip6->ip6_dst = dst ? *dst : in6m->in6m_addr; 428 429 /* fill in the MLD header */ 430 md->m_len = sizeof(struct mld6_hdr); 431 mldh = mtod(md, struct mld6_hdr *); 432 mldh->mld6_type = type; 433 mldh->mld6_code = 0; 434 mldh->mld6_cksum = 0; 435 /* XXX: we assume the function will not be called for query messages */ 436 mldh->mld6_maxdelay = 0; 437 mldh->mld6_reserved = 0; 438 mldh->mld6_addr = in6m->in6m_addr; 439 if (IN6_IS_ADDR_MC_LINKLOCAL(&mldh->mld6_addr)) 440 mldh->mld6_addr.s6_addr16[1] = 0; /* XXX */ 441 mldh->mld6_cksum = in6_cksum(mh, IPPROTO_ICMPV6, sizeof(struct ip6_hdr), 442 sizeof(struct mld6_hdr)); 443 444 /* construct multicast option */ 445 bzero(&im6o, sizeof(im6o)); 446 im6o.im6o_multicast_ifp = ifp; 447 im6o.im6o_multicast_hlim = 1; 448 449 /* 450 * Request loopback of the report if we are acting as a multicast 451 * router, so that the process-level routing daemon can hear it. 452 */ 453 im6o.im6o_multicast_loop = (ip6_mrouter != NULL); 454 455 /* increment output statictics */ 456 icmp6stat.icp6s_outhist[type]++; 457 458 ip6_output(mh, &ip6_opts, NULL, 0, &im6o, &outif); 459 if (outif) { 460 icmp6_ifstat_inc(outif, ifs6_out_msg); 461 switch (type) { 462 case MLD6_LISTENER_QUERY: 463 icmp6_ifstat_inc(outif, ifs6_out_mldquery); 464 break; 465 case MLD6_LISTENER_REPORT: 466 icmp6_ifstat_inc(outif, ifs6_out_mldreport); 467 break; 468 case MLD6_LISTENER_DONE: 469 icmp6_ifstat_inc(outif, ifs6_out_mlddone); 470 break; 471 } 472 } 473 } 474