1 /*- 2 * SPDX-License-Identifier: BSD-3-Clause 3 * 4 * Copyright (c) 2006-2007, by Cisco Systems, Inc. All rights reserved. 5 * Copyright (c) 2008-2012, by Randall Stewart. All rights reserved. 6 * Copyright (c) 2008-2012, by Michael Tuexen. All rights reserved. 7 * 8 * Redistribution and use in source and binary forms, with or without 9 * modification, are permitted provided that the following conditions are met: 10 * 11 * a) Redistributions of source code must retain the above copyright notice, 12 * this list of conditions and the following disclaimer. 13 * 14 * b) Redistributions in binary form must reproduce the above copyright 15 * notice, this list of conditions and the following disclaimer in 16 * the documentation and/or other materials provided with the distribution. 17 * 18 * c) Neither the name of Cisco Systems, Inc. nor the names of its 19 * contributors may be used to endorse or promote products derived 20 * from this software without specific prior written permission. 21 * 22 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS 23 * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, 24 * THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE 25 * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE 26 * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR 27 * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF 28 * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS 29 * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN 30 * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) 31 * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF 32 * THE POSSIBILITY OF SUCH DAMAGE. 33 */ 34 35 #include <sys/cdefs.h> 36 __FBSDID("$FreeBSD$"); 37 38 #ifndef _NETINET_SCTP_OS_BSD_H_ 39 #define _NETINET_SCTP_OS_BSD_H_ 40 /* 41 * includes 42 */ 43 #include "opt_inet6.h" 44 #include "opt_inet.h" 45 #include "opt_sctp.h" 46 47 #include <sys/param.h> 48 #include <sys/domain.h> 49 #include <sys/eventhandler.h> 50 #include <sys/ktr.h> 51 #include <sys/systm.h> 52 #include <sys/malloc.h> 53 #include <sys/module.h> 54 #include <sys/kernel.h> 55 #include <sys/sysctl.h> 56 #include <sys/mbuf.h> 57 #include <sys/protosw.h> 58 #include <sys/socket.h> 59 #include <sys/socketvar.h> 60 #include <sys/jail.h> 61 #include <sys/sysctl.h> 62 #include <sys/resourcevar.h> 63 #include <sys/uio.h> 64 #include <sys/lock.h> 65 #include <sys/rwlock.h> 66 #include <sys/kthread.h> 67 #include <sys/priv.h> 68 #include <sys/random.h> 69 #include <sys/limits.h> 70 #include <sys/queue.h> 71 #include <machine/cpu.h> 72 73 #include <net/if.h> 74 #include <net/if_types.h> 75 #include <net/if_var.h> 76 #include <net/route.h> 77 #include <net/route/nhop.h> 78 #include <net/vnet.h> 79 80 #include <netinet/in.h> 81 #include <netinet/in_systm.h> 82 #include <netinet/ip.h> 83 #include <netinet/in_fib.h> 84 #include <netinet/in_pcb.h> 85 #include <netinet/in_var.h> 86 #include <netinet/ip_var.h> 87 #include <netinet/ip_icmp.h> 88 #include <netinet/icmp_var.h> 89 90 #ifdef INET6 91 #include <netinet/ip6.h> 92 #include <netinet6/in6_fib.h> 93 #include <netinet6/ip6_var.h> 94 #include <netinet6/in6_pcb.h> 95 #include <netinet6/ip6protosw.h> 96 #include <netinet6/nd6.h> 97 #include <netinet6/scope6_var.h> 98 #endif /* INET6 */ 99 100 #include <netinet/ip_options.h> 101 102 #include <crypto/sha1.h> 103 #include <crypto/sha2/sha256.h> 104 105 /* Declare all the malloc names for all the various mallocs */ 106 MALLOC_DECLARE(SCTP_M_MAP); 107 MALLOC_DECLARE(SCTP_M_STRMI); 108 MALLOC_DECLARE(SCTP_M_STRMO); 109 MALLOC_DECLARE(SCTP_M_ASC_ADDR); 110 MALLOC_DECLARE(SCTP_M_ASC_IT); 111 MALLOC_DECLARE(SCTP_M_AUTH_CL); 112 MALLOC_DECLARE(SCTP_M_AUTH_KY); 113 MALLOC_DECLARE(SCTP_M_AUTH_HL); 114 MALLOC_DECLARE(SCTP_M_AUTH_IF); 115 MALLOC_DECLARE(SCTP_M_STRESET); 116 MALLOC_DECLARE(SCTP_M_CMSG); 117 MALLOC_DECLARE(SCTP_M_COPYAL); 118 MALLOC_DECLARE(SCTP_M_VRF); 119 MALLOC_DECLARE(SCTP_M_IFA); 120 MALLOC_DECLARE(SCTP_M_IFN); 121 MALLOC_DECLARE(SCTP_M_TIMW); 122 MALLOC_DECLARE(SCTP_M_MVRF); 123 MALLOC_DECLARE(SCTP_M_ITER); 124 MALLOC_DECLARE(SCTP_M_SOCKOPT); 125 MALLOC_DECLARE(SCTP_M_MCORE); 126 127 #if defined(SCTP_LOCAL_TRACE_BUF) 128 129 #define SCTP_GET_CYCLECOUNT get_cyclecount() 130 #define SCTP_CTR6 sctp_log_trace 131 132 #else 133 #define SCTP_CTR6 CTR6 134 #endif 135 136 /* 137 * Macros to expand out globals defined by various modules 138 * to either a real global or a virtualized instance of one, 139 * depending on whether VIMAGE is defined. 140 */ 141 /* then define the macro(s) that hook into the vimage macros */ 142 #define MODULE_GLOBAL(__SYMBOL) V_##__SYMBOL 143 144 #define V_system_base_info VNET(system_base_info) 145 #define SCTP_BASE_INFO(__m) V_system_base_info.sctppcbinfo.__m 146 #define SCTP_BASE_STATS V_system_base_info.sctpstat 147 #define SCTP_BASE_STAT(__m) V_system_base_info.sctpstat.__m 148 #define SCTP_BASE_SYSCTL(__m) V_system_base_info.sctpsysctl.__m 149 #define SCTP_BASE_VAR(__m) V_system_base_info.__m 150 151 #define SCTP_PRINTF(params...) printf(params) 152 #if defined(SCTP_DEBUG) 153 #define SCTPDBG(level, params...) \ 154 { \ 155 do { \ 156 if (SCTP_BASE_SYSCTL(sctp_debug_on) & level ) { \ 157 SCTP_PRINTF(params); \ 158 } \ 159 } while (0); \ 160 } 161 #define SCTPDBG_ADDR(level, addr) \ 162 { \ 163 do { \ 164 if (SCTP_BASE_SYSCTL(sctp_debug_on) & level ) { \ 165 sctp_print_address(addr); \ 166 } \ 167 } while (0); \ 168 } 169 #else 170 #define SCTPDBG(level, params...) 171 #define SCTPDBG_ADDR(level, addr) 172 #endif 173 174 #ifdef SCTP_LTRACE_CHUNKS 175 #define SCTP_LTRACE_CHK(a, b, c, d) if(SCTP_BASE_SYSCTL(sctp_logging_level) & SCTP_LTRACE_CHUNK_ENABLE) SCTP_CTR6(KTR_SUBSYS, "SCTP:%d[%d]:%x-%x-%x-%x", SCTP_LOG_CHUNK_PROC, 0, a, b, c, d) 176 #else 177 #define SCTP_LTRACE_CHK(a, b, c, d) 178 #endif 179 180 #ifdef SCTP_LTRACE_ERRORS 181 #define SCTP_LTRACE_ERR_RET_PKT(m, inp, stcb, net, file, err) \ 182 if (SCTP_BASE_SYSCTL(sctp_logging_level) & SCTP_LTRACE_ERROR_ENABLE) \ 183 SCTP_PRINTF("mbuf:%p inp:%p stcb:%p net:%p file:%x line:%d error:%d\n", \ 184 m, inp, stcb, net, file, __LINE__, err); 185 #define SCTP_LTRACE_ERR_RET(inp, stcb, net, file, err) \ 186 if (SCTP_BASE_SYSCTL(sctp_logging_level) & SCTP_LTRACE_ERROR_ENABLE) \ 187 SCTP_PRINTF("inp:%p stcb:%p net:%p file:%x line:%d error:%d\n", \ 188 inp, stcb, net, file, __LINE__, err); 189 #else 190 #define SCTP_LTRACE_ERR_RET_PKT(m, inp, stcb, net, file, err) 191 #define SCTP_LTRACE_ERR_RET(inp, stcb, net, file, err) 192 #endif 193 194 /* 195 * Local address and interface list handling 196 */ 197 #define SCTP_MAX_VRF_ID 0 198 #define SCTP_SIZE_OF_VRF_HASH 3 199 #define SCTP_IFNAMSIZ IFNAMSIZ 200 #define SCTP_DEFAULT_VRFID 0 201 #define SCTP_VRF_ADDR_HASH_SIZE 16 202 #define SCTP_VRF_IFN_HASH_SIZE 3 203 #define SCTP_INIT_VRF_TABLEID(vrf) 204 205 #define SCTP_IFN_IS_IFT_LOOP(ifn) ((ifn)->ifn_type == IFT_LOOP) 206 #define SCTP_ROUTE_IS_REAL_LOOP(ro) ((ro)->ro_nh && (ro)->ro_nh->nh_ifa && (ro)->ro_nh->nh_ifa->ifa_ifp && (ro)->ro_nh->nh_ifa->ifa_ifp->if_type == IFT_LOOP) 207 208 /* 209 * Access to IFN's to help with src-addr-selection 210 */ 211 /* This could return VOID if the index works but for BSD we provide both. */ 212 #define SCTP_GET_IFN_VOID_FROM_ROUTE(ro) (void *)ro->ro_nh->nh_ifp 213 #define SCTP_GET_IF_INDEX_FROM_ROUTE(ro) (ro)->ro_nh->nh_ifp->if_index 214 #define SCTP_ROUTE_HAS_VALID_IFN(ro) ((ro)->ro_nh && (ro)->ro_nh->nh_ifp) 215 216 /* 217 * general memory allocation 218 */ 219 #define SCTP_MALLOC(var, type, size, name) \ 220 do { \ 221 var = (type)malloc(size, name, M_NOWAIT); \ 222 } while (0) 223 224 #define SCTP_FREE(var, type) free(var, type) 225 226 #define SCTP_MALLOC_SONAME(var, type, size) \ 227 do { \ 228 var = (type)malloc(size, M_SONAME, M_WAITOK | M_ZERO); \ 229 } while (0) 230 231 #define SCTP_FREE_SONAME(var) free(var, M_SONAME) 232 233 #define SCTP_PROCESS_STRUCT struct proc * 234 235 /* 236 * zone allocation functions 237 */ 238 #include <vm/uma.h> 239 240 /* SCTP_ZONE_INIT: initialize the zone */ 241 typedef struct uma_zone *sctp_zone_t; 242 #define SCTP_ZONE_INIT(zone, name, size, number) { \ 243 zone = uma_zcreate(name, size, NULL, NULL, NULL, NULL, UMA_ALIGN_PTR,\ 244 0); \ 245 uma_zone_set_max(zone, number); \ 246 } 247 248 #define SCTP_ZONE_DESTROY(zone) uma_zdestroy(zone) 249 250 /* SCTP_ZONE_GET: allocate element from the zone */ 251 #define SCTP_ZONE_GET(zone, type) \ 252 (type *)uma_zalloc(zone, M_NOWAIT); 253 254 /* SCTP_ZONE_FREE: free element from the zone */ 255 #define SCTP_ZONE_FREE(zone, element) \ 256 uma_zfree(zone, element); 257 258 #define SCTP_HASH_INIT(size, hashmark) hashinit_flags(size, M_PCB, hashmark, HASH_NOWAIT) 259 #define SCTP_HASH_FREE(table, hashmark) hashdestroy(table, M_PCB, hashmark) 260 261 #define SCTP_M_COPYM m_copym 262 263 /* 264 * timers 265 */ 266 #include <sys/callout.h> 267 typedef struct callout sctp_os_timer_t; 268 269 #define SCTP_OS_TIMER_INIT(tmr) callout_init(tmr, 1) 270 /* 271 * NOTE: The next two shouldn't be called directly outside of sctp_timer_start() 272 * and sctp_timer_stop(), since they don't handle incrementing/decrementing 273 * relevant reference counts. 274 */ 275 #define SCTP_OS_TIMER_START callout_reset 276 #define SCTP_OS_TIMER_STOP callout_stop 277 #define SCTP_OS_TIMER_STOP_DRAIN callout_drain 278 #define SCTP_OS_TIMER_PENDING callout_pending 279 #define SCTP_OS_TIMER_ACTIVE callout_active 280 #define SCTP_OS_TIMER_DEACTIVATE callout_deactivate 281 282 #define sctp_get_tick_count() (ticks) 283 284 #define SCTP_UNUSED __attribute__((unused)) 285 286 /* 287 * Functions 288 */ 289 /* Mbuf manipulation and access macros */ 290 #define SCTP_BUF_LEN(m) (m->m_len) 291 #define SCTP_BUF_NEXT(m) (m->m_next) 292 #define SCTP_BUF_NEXT_PKT(m) (m->m_nextpkt) 293 #define SCTP_BUF_RESV_UF(m, size) m->m_data += size 294 #define SCTP_BUF_AT(m, size) m->m_data + size 295 #define SCTP_BUF_IS_EXTENDED(m) (m->m_flags & M_EXT) 296 #define SCTP_BUF_SIZE M_SIZE 297 #define SCTP_BUF_TYPE(m) (m->m_type) 298 #define SCTP_BUF_RECVIF(m) (m->m_pkthdr.rcvif) 299 #define SCTP_BUF_PREPEND M_PREPEND 300 301 #define SCTP_ALIGN_TO_END(m, len) M_ALIGN(m, len) 302 303 #define SCTP_SNPRINTF(...) snprintf(__VA_ARGS__) 304 305 /* We make it so if you have up to 4 threads 306 * writing based on the default size of 307 * the packet log 65 k, that would be 308 * 4 16k packets before we would hit 309 * a problem. 310 */ 311 #define SCTP_PKTLOG_WRITERS_NEED_LOCK 3 312 313 /*************************/ 314 /* MTU */ 315 /*************************/ 316 #define SCTP_GATHER_MTU_FROM_IFN_INFO(ifn, ifn_index) ((ifn != NULL) ? ((struct ifnet *)ifn)->if_mtu : 0) 317 #define SCTP_GATHER_MTU_FROM_ROUTE(sctp_ifa, sa, nh) ((uint32_t)((nh != NULL) ? nh->nh_mtu : 0)) 318 319 /*************************/ 320 /* These are for logging */ 321 /*************************/ 322 /* return the base ext data pointer */ 323 #define SCTP_BUF_EXTEND_BASE(m) (m->m_ext.ext_buf) 324 /* return the refcnt of the data pointer */ 325 #define SCTP_BUF_EXTEND_REFCNT(m) (*m->m_ext.ext_cnt) 326 /* return any buffer related flags, this is 327 * used beyond logging for apple only. 328 */ 329 #define SCTP_BUF_GET_FLAGS(m) (m->m_flags) 330 331 /* For BSD this just accesses the M_PKTHDR length 332 * so it operates on an mbuf with hdr flag. Other 333 * O/S's may have separate packet header and mbuf 334 * chain pointers.. thus the macro. 335 */ 336 #define SCTP_HEADER_TO_CHAIN(m) (m) 337 #define SCTP_DETACH_HEADER_FROM_CHAIN(m) 338 #define SCTP_HEADER_LEN(m) ((m)->m_pkthdr.len) 339 #define SCTP_GET_HEADER_FOR_OUTPUT(o_pak) 0 340 #define SCTP_RELEASE_HEADER(m) 341 #define SCTP_RELEASE_PKT(m) sctp_m_freem(m) 342 #define SCTP_ENABLE_UDP_CSUM(m) do { \ 343 m->m_pkthdr.csum_flags = CSUM_UDP; \ 344 m->m_pkthdr.csum_data = offsetof(struct udphdr, uh_sum); \ 345 } while (0) 346 347 #define SCTP_GET_PKT_VRFID(m, vrf_id) ((vrf_id = SCTP_DEFAULT_VRFID) != SCTP_DEFAULT_VRFID) 348 349 /* Attach the chain of data into the sendable packet. */ 350 #define SCTP_ATTACH_CHAIN(pak, m, packet_length) do { \ 351 pak = m; \ 352 pak->m_pkthdr.len = packet_length; \ 353 } while(0) 354 355 /* Other m_pkthdr type things */ 356 #define SCTP_IS_IT_BROADCAST(dst, m) ((m->m_flags & M_PKTHDR) ? in_broadcast(dst, m->m_pkthdr.rcvif) : 0) 357 #define SCTP_IS_IT_LOOPBACK(m) ((m->m_flags & M_PKTHDR) && ((m->m_pkthdr.rcvif == NULL) || (m->m_pkthdr.rcvif->if_type == IFT_LOOP))) 358 359 /* This converts any input packet header 360 * into the chain of data holders, for BSD 361 * its a NOP. 362 */ 363 364 /* get the v6 hop limit */ 365 #define SCTP_GET_HLIM(inp, ro) in6_selecthlim(&inp->ip_inp.inp, (ro ? (ro->ro_nh ? (ro->ro_nh->nh_ifp) : (NULL)) : (NULL))); 366 367 /* is the endpoint v6only? */ 368 #define SCTP_IPV6_V6ONLY(sctp_inpcb) ((sctp_inpcb)->ip_inp.inp.inp_flags & IN6P_IPV6_V6ONLY) 369 /* is the socket non-blocking? */ 370 #define SCTP_SO_IS_NBIO(so) ((so)->so_state & SS_NBIO) 371 #define SCTP_SET_SO_NBIO(so) ((so)->so_state |= SS_NBIO) 372 #define SCTP_CLEAR_SO_NBIO(so) ((so)->so_state &= ~SS_NBIO) 373 /* get the socket type */ 374 #define SCTP_SO_TYPE(so) ((so)->so_type) 375 /* Use a macro for renaming sb_cc to sb_acc. 376 * Initially sb_ccc was used, but this broke select() when used 377 * with SCTP sockets. 378 */ 379 #define sb_cc sb_acc 380 /* reserve sb space for a socket */ 381 #define SCTP_SORESERVE(so, send, recv) soreserve(so, send, recv) 382 /* wakeup a socket */ 383 #define SCTP_SOWAKEUP(so) wakeup(&(so)->so_timeo) 384 /* clear the socket buffer state */ 385 #define SCTP_SB_CLEAR(sb) \ 386 (sb).sb_cc = 0; \ 387 (sb).sb_mb = NULL; \ 388 (sb).sb_mbcnt = 0; 389 390 #define SCTP_SB_LIMIT_RCV(so) (SOLISTENING(so) ? so->sol_sbrcv_hiwat : so->so_rcv.sb_hiwat) 391 #define SCTP_SB_LIMIT_SND(so) (SOLISTENING(so) ? so->sol_sbsnd_hiwat : so->so_snd.sb_hiwat) 392 393 /* 394 * routes, output, etc. 395 */ 396 typedef struct route sctp_route_t; 397 398 #define SCTP_RTALLOC(ro, vrf_id, fibnum) \ 399 { \ 400 if ((ro)->ro_nh == NULL) { \ 401 (ro)->ro_nh = rib_lookup(fibnum, &(ro)->ro_dst, NHR_REF, 0); \ 402 } \ 403 } 404 405 /* 406 * SCTP protocol specific mbuf flags. 407 */ 408 #define M_NOTIFICATION M_PROTO1 /* SCTP notification */ 409 410 /* 411 * IP output routines 412 */ 413 #define SCTP_IP_OUTPUT(result, o_pak, ro, _inp, vrf_id) \ 414 { \ 415 struct sctp_inpcb *local_inp = _inp; \ 416 int o_flgs = IP_RAWOUTPUT; \ 417 \ 418 m_clrprotoflags(o_pak); \ 419 if ((local_inp != NULL) && (local_inp->sctp_socket != NULL)) { \ 420 o_flgs |= local_inp->sctp_socket->so_options & SO_DONTROUTE; \ 421 } \ 422 result = ip_output(o_pak, NULL, ro, o_flgs, 0, NULL); \ 423 } 424 425 #define SCTP_IP6_OUTPUT(result, o_pak, ro, ifp, _inp, vrf_id) \ 426 { \ 427 struct sctp_inpcb *local_inp = _inp; \ 428 \ 429 m_clrprotoflags(o_pak); \ 430 if (local_inp != NULL) { \ 431 INP_RLOCK(&local_inp->ip_inp.inp); \ 432 result = ip6_output(o_pak, \ 433 local_inp->ip_inp.inp.in6p_outputopts, \ 434 (ro), 0, 0, ifp, NULL); \ 435 INP_RUNLOCK(&local_inp->ip_inp.inp); \ 436 } else { \ 437 result = ip6_output(o_pak, NULL, (ro), 0, 0, ifp, NULL); \ 438 } \ 439 } 440 441 struct mbuf * 442 sctp_get_mbuf_for_msg(unsigned int space_needed, 443 int want_header, int how, int allonebuf, int type); 444 445 /* 446 * SCTP AUTH 447 */ 448 #define SCTP_READ_RANDOM(buf, len) arc4rand(buf, len, 0) 449 450 /* map standard crypto API names */ 451 #define SCTP_SHA1_CTX SHA1_CTX 452 #define SCTP_SHA1_INIT SHA1Init 453 #define SCTP_SHA1_UPDATE SHA1Update 454 #define SCTP_SHA1_FINAL(x,y) SHA1Final((caddr_t)x, y) 455 456 #define SCTP_SHA256_CTX SHA256_CTX 457 #define SCTP_SHA256_INIT SHA256_Init 458 #define SCTP_SHA256_UPDATE SHA256_Update 459 #define SCTP_SHA256_FINAL(x,y) SHA256_Final((caddr_t)x, y) 460 461 #define SCTP_DECREMENT_AND_CHECK_REFCOUNT(addr) (atomic_fetchadd_int(addr, -1) == 1) 462 #if defined(INVARIANTS) 463 #define SCTP_SAVE_ATOMIC_DECREMENT(addr, val) \ 464 { \ 465 int32_t oldval; \ 466 oldval = atomic_fetchadd_int(addr, -val); \ 467 if (oldval < val) { \ 468 panic("Counter goes negative"); \ 469 } \ 470 } 471 #else 472 #define SCTP_SAVE_ATOMIC_DECREMENT(addr, val) \ 473 { \ 474 int32_t oldval; \ 475 oldval = atomic_fetchadd_int(addr, -val); \ 476 if (oldval < val) { \ 477 *addr = 0; \ 478 } \ 479 } 480 #endif 481 482 #define SCTP_IS_LISTENING(inp) ((inp->sctp_flags & SCTP_PCB_FLAGS_ACCEPTING) != 0) 483 484 int sctp_syscalls_init(void); 485 int sctp_syscalls_uninit(void); 486 487 #endif 488