xref: /freebsd/sys/netinet/sctp_os_bsd.h (revision 20bd59416dcacbd2b776fe49dfa193900f303287)
1 /*-
2  * SPDX-License-Identifier: BSD-3-Clause
3  *
4  * Copyright (c) 2006-2007, by Cisco Systems, Inc. All rights reserved.
5  * Copyright (c) 2008-2012, by Randall Stewart. All rights reserved.
6  * Copyright (c) 2008-2012, by Michael Tuexen. All rights reserved.
7  *
8  * Redistribution and use in source and binary forms, with or without
9  * modification, are permitted provided that the following conditions are met:
10  *
11  * a) Redistributions of source code must retain the above copyright notice,
12  *   this list of conditions and the following disclaimer.
13  *
14  * b) Redistributions in binary form must reproduce the above copyright
15  *    notice, this list of conditions and the following disclaimer in
16  *   the documentation and/or other materials provided with the distribution.
17  *
18  * c) Neither the name of Cisco Systems, Inc. nor the names of its
19  *    contributors may be used to endorse or promote products derived
20  *    from this software without specific prior written permission.
21  *
22  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
23  * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO,
24  * THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
25  * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
26  * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
27  * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
28  * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
29  * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
30  * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
31  * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF
32  * THE POSSIBILITY OF SUCH DAMAGE.
33  */
34 
35 #include <sys/cdefs.h>
36 __FBSDID("$FreeBSD$");
37 
38 #ifndef _NETINET_SCTP_OS_BSD_H_
39 #define _NETINET_SCTP_OS_BSD_H_
40 /*
41  * includes
42  */
43 #include "opt_inet6.h"
44 #include "opt_inet.h"
45 #include "opt_sctp.h"
46 
47 #include <sys/param.h>
48 #include <sys/ktr.h>
49 #include <sys/systm.h>
50 #include <sys/malloc.h>
51 #include <sys/kernel.h>
52 #include <sys/sysctl.h>
53 #include <sys/mbuf.h>
54 #include <sys/protosw.h>
55 #include <sys/socket.h>
56 #include <sys/socketvar.h>
57 #include <sys/jail.h>
58 #include <sys/sysctl.h>
59 #include <sys/resourcevar.h>
60 #include <sys/uio.h>
61 #include <sys/lock.h>
62 #include <sys/rwlock.h>
63 #include <sys/kthread.h>
64 #include <sys/priv.h>
65 #include <sys/random.h>
66 #include <sys/limits.h>
67 #include <sys/queue.h>
68 #include <machine/cpu.h>
69 
70 #include <net/if.h>
71 #include <net/if_types.h>
72 #include <net/if_var.h>
73 #include <net/route.h>
74 #include <net/vnet.h>
75 
76 #include <netinet/in.h>
77 #include <netinet/in_systm.h>
78 #include <netinet/ip.h>
79 #include <netinet/in_pcb.h>
80 #include <netinet/in_var.h>
81 #include <netinet/ip_var.h>
82 #include <netinet/ip_icmp.h>
83 #include <netinet/icmp_var.h>
84 
85 #ifdef INET6
86 #include <sys/domain.h>
87 #include <netinet/ip6.h>
88 #include <netinet6/ip6_var.h>
89 #include <netinet6/in6_pcb.h>
90 #include <netinet6/ip6protosw.h>
91 #include <netinet6/nd6.h>
92 #include <netinet6/scope6_var.h>
93 #endif				/* INET6 */
94 
95 #include <netinet/ip_options.h>
96 
97 #include <crypto/sha1.h>
98 #include <crypto/sha2/sha256.h>
99 
100 /* Declare all the malloc names for all the various mallocs */
101 MALLOC_DECLARE(SCTP_M_MAP);
102 MALLOC_DECLARE(SCTP_M_STRMI);
103 MALLOC_DECLARE(SCTP_M_STRMO);
104 MALLOC_DECLARE(SCTP_M_ASC_ADDR);
105 MALLOC_DECLARE(SCTP_M_ASC_IT);
106 MALLOC_DECLARE(SCTP_M_AUTH_CL);
107 MALLOC_DECLARE(SCTP_M_AUTH_KY);
108 MALLOC_DECLARE(SCTP_M_AUTH_HL);
109 MALLOC_DECLARE(SCTP_M_AUTH_IF);
110 MALLOC_DECLARE(SCTP_M_STRESET);
111 MALLOC_DECLARE(SCTP_M_CMSG);
112 MALLOC_DECLARE(SCTP_M_COPYAL);
113 MALLOC_DECLARE(SCTP_M_VRF);
114 MALLOC_DECLARE(SCTP_M_IFA);
115 MALLOC_DECLARE(SCTP_M_IFN);
116 MALLOC_DECLARE(SCTP_M_TIMW);
117 MALLOC_DECLARE(SCTP_M_MVRF);
118 MALLOC_DECLARE(SCTP_M_ITER);
119 MALLOC_DECLARE(SCTP_M_SOCKOPT);
120 MALLOC_DECLARE(SCTP_M_MCORE);
121 
122 #if defined(SCTP_LOCAL_TRACE_BUF)
123 
124 #define SCTP_GET_CYCLECOUNT get_cyclecount()
125 #define SCTP_CTR6 sctp_log_trace
126 
127 #else
128 #define SCTP_CTR6 CTR6
129 #endif
130 
131 /*
132  * Macros to expand out globals defined by various modules
133  * to either a real global or a virtualized instance of one,
134  * depending on whether VIMAGE is defined.
135  */
136 /* then define the macro(s) that hook into the vimage macros */
137 #define MODULE_GLOBAL(__SYMBOL) V_##__SYMBOL
138 
139 #define V_system_base_info VNET(system_base_info)
140 #define SCTP_BASE_INFO(__m) V_system_base_info.sctppcbinfo.__m
141 #define SCTP_BASE_STATS V_system_base_info.sctpstat
142 #define SCTP_BASE_STAT(__m) V_system_base_info.sctpstat.__m
143 #define SCTP_BASE_SYSCTL(__m) V_system_base_info.sctpsysctl.__m
144 #define SCTP_BASE_VAR(__m) V_system_base_info.__m
145 
146 #define SCTP_PRINTF(params...)	printf(params)
147 #if defined(SCTP_DEBUG)
148 #define SCTPDBG(level, params...)					\
149 {									\
150 	do {								\
151 		if (SCTP_BASE_SYSCTL(sctp_debug_on) & level ) {		\
152 			SCTP_PRINTF(params);				\
153 		}							\
154 	} while (0);							\
155 }
156 #define SCTPDBG_ADDR(level, addr)					\
157 {									\
158 	do {								\
159 		if (SCTP_BASE_SYSCTL(sctp_debug_on) & level ) {		\
160 			sctp_print_address(addr);			\
161 		}							\
162 	} while (0);							\
163 }
164 #else
165 #define SCTPDBG(level, params...)
166 #define SCTPDBG_ADDR(level, addr)
167 #endif
168 
169 #ifdef SCTP_LTRACE_CHUNKS
170 #define SCTP_LTRACE_CHK(a, b, c, d) if(SCTP_BASE_SYSCTL(sctp_logging_level) & SCTP_LTRACE_CHUNK_ENABLE) SCTP_CTR6(KTR_SUBSYS, "SCTP:%d[%d]:%x-%x-%x-%x", SCTP_LOG_CHUNK_PROC, 0, a, b, c, d)
171 #else
172 #define SCTP_LTRACE_CHK(a, b, c, d)
173 #endif
174 
175 #ifdef SCTP_LTRACE_ERRORS
176 #define SCTP_LTRACE_ERR_RET_PKT(m, inp, stcb, net, file, err) \
177 	if (SCTP_BASE_SYSCTL(sctp_logging_level) & SCTP_LTRACE_ERROR_ENABLE) \
178 		SCTP_PRINTF("mbuf:%p inp:%p stcb:%p net:%p file:%x line:%d error:%d\n", \
179 		            m, inp, stcb, net, file, __LINE__, err);
180 #define SCTP_LTRACE_ERR_RET(inp, stcb, net, file, err) \
181 	if (SCTP_BASE_SYSCTL(sctp_logging_level) & SCTP_LTRACE_ERROR_ENABLE) \
182 		SCTP_PRINTF("inp:%p stcb:%p net:%p file:%x line:%d error:%d\n", \
183 		            inp, stcb, net, file, __LINE__, err);
184 #else
185 #define SCTP_LTRACE_ERR_RET_PKT(m, inp, stcb, net, file, err)
186 #define SCTP_LTRACE_ERR_RET(inp, stcb, net, file, err)
187 #endif
188 
189 
190 /*
191  * Local address and interface list handling
192  */
193 #define SCTP_MAX_VRF_ID		0
194 #define SCTP_SIZE_OF_VRF_HASH	3
195 #define SCTP_IFNAMSIZ		IFNAMSIZ
196 #define SCTP_DEFAULT_VRFID	0
197 #define SCTP_VRF_ADDR_HASH_SIZE	16
198 #define SCTP_VRF_IFN_HASH_SIZE	3
199 #define	SCTP_INIT_VRF_TABLEID(vrf)
200 
201 #define SCTP_IFN_IS_IFT_LOOP(ifn) ((ifn)->ifn_type == IFT_LOOP)
202 #define SCTP_ROUTE_IS_REAL_LOOP(ro) ((ro)->ro_rt && (ro)->ro_rt->rt_ifa && (ro)->ro_rt->rt_ifa->ifa_ifp && (ro)->ro_rt->rt_ifa->ifa_ifp->if_type == IFT_LOOP)
203 
204 /*
205  * Access to IFN's to help with src-addr-selection
206  */
207 /* This could return VOID if the index works but for BSD we provide both. */
208 #define SCTP_GET_IFN_VOID_FROM_ROUTE(ro) (void *)ro->ro_rt->rt_ifp
209 #define SCTP_GET_IF_INDEX_FROM_ROUTE(ro) (ro)->ro_rt->rt_ifp->if_index
210 #define SCTP_ROUTE_HAS_VALID_IFN(ro) ((ro)->ro_rt && (ro)->ro_rt->rt_ifp)
211 
212 /*
213  * general memory allocation
214  */
215 #define SCTP_MALLOC(var, type, size, name) \
216 	do { \
217 		var = (type)malloc(size, name, M_NOWAIT); \
218 	} while (0)
219 
220 #define SCTP_FREE(var, type)	free(var, type)
221 
222 #define SCTP_MALLOC_SONAME(var, type, size) \
223 	do { \
224 		var = (type)malloc(size, M_SONAME, M_WAITOK | M_ZERO); \
225 	} while (0)
226 
227 #define SCTP_FREE_SONAME(var)	free(var, M_SONAME)
228 
229 #define SCTP_PROCESS_STRUCT struct proc *
230 
231 /*
232  * zone allocation functions
233  */
234 #include <vm/uma.h>
235 
236 /* SCTP_ZONE_INIT: initialize the zone */
237 typedef struct uma_zone *sctp_zone_t;
238 #define SCTP_ZONE_INIT(zone, name, size, number) { \
239 	zone = uma_zcreate(name, size, NULL, NULL, NULL, NULL, UMA_ALIGN_PTR,\
240 		0); \
241 	uma_zone_set_max(zone, number); \
242 }
243 
244 #define SCTP_ZONE_DESTROY(zone) uma_zdestroy(zone)
245 
246 /* SCTP_ZONE_GET: allocate element from the zone */
247 #define SCTP_ZONE_GET(zone, type) \
248 	(type *)uma_zalloc(zone, M_NOWAIT);
249 
250 /* SCTP_ZONE_FREE: free element from the zone */
251 #define SCTP_ZONE_FREE(zone, element) \
252 	uma_zfree(zone, element);
253 
254 #define SCTP_HASH_INIT(size, hashmark) hashinit_flags(size, M_PCB, hashmark, HASH_NOWAIT)
255 #define SCTP_HASH_FREE(table, hashmark) hashdestroy(table, M_PCB, hashmark)
256 
257 #define SCTP_M_COPYM	m_copym
258 
259 /*
260  * timers
261  */
262 #include <sys/callout.h>
263 typedef struct callout sctp_os_timer_t;
264 
265 
266 #define SCTP_OS_TIMER_INIT(tmr)	callout_init(tmr, 1)
267 #define SCTP_OS_TIMER_START	callout_reset
268 #define SCTP_OS_TIMER_STOP	callout_stop
269 #define SCTP_OS_TIMER_STOP_DRAIN callout_drain
270 #define SCTP_OS_TIMER_PENDING	callout_pending
271 #define SCTP_OS_TIMER_ACTIVE	callout_active
272 #define SCTP_OS_TIMER_DEACTIVATE callout_deactivate
273 
274 #define sctp_get_tick_count() (ticks)
275 
276 #define SCTP_UNUSED __attribute__((unused))
277 
278 /*
279  * Functions
280  */
281 /* Mbuf manipulation and access macros  */
282 #define SCTP_BUF_LEN(m) (m->m_len)
283 #define SCTP_BUF_NEXT(m) (m->m_next)
284 #define SCTP_BUF_NEXT_PKT(m) (m->m_nextpkt)
285 #define SCTP_BUF_RESV_UF(m, size) m->m_data += size
286 #define SCTP_BUF_AT(m, size) m->m_data + size
287 #define SCTP_BUF_IS_EXTENDED(m) (m->m_flags & M_EXT)
288 #define SCTP_BUF_SIZE M_SIZE
289 #define SCTP_BUF_TYPE(m) (m->m_type)
290 #define SCTP_BUF_RECVIF(m) (m->m_pkthdr.rcvif)
291 #define SCTP_BUF_PREPEND	M_PREPEND
292 
293 #define SCTP_ALIGN_TO_END(m, len) M_ALIGN(m, len)
294 
295 /* We make it so if you have up to 4 threads
296  * writing based on the default size of
297  * the packet log 65 k, that would be
298  * 4 16k packets before we would hit
299  * a problem.
300  */
301 #define SCTP_PKTLOG_WRITERS_NEED_LOCK 3
302 
303 /*************************/
304 /*      MTU              */
305 /*************************/
306 #define SCTP_GATHER_MTU_FROM_IFN_INFO(ifn, ifn_index, af) ((struct ifnet *)ifn)->if_mtu
307 #define SCTP_GATHER_MTU_FROM_ROUTE(sctp_ifa, sa, rt) ((uint32_t)((rt != NULL) ? rt->rt_mtu : 0))
308 #define SCTP_GATHER_MTU_FROM_INTFC(sctp_ifn) ((sctp_ifn->ifn_p != NULL) ? ((struct ifnet *)(sctp_ifn->ifn_p))->if_mtu : 0)
309 #define SCTP_SET_MTU_OF_ROUTE(sa, rt, mtu) do { \
310                                               if (rt != NULL) \
311                                                  rt->rt_mtu = mtu; \
312                                            } while(0)
313 
314 /* (de-)register interface event notifications */
315 #define SCTP_REGISTER_INTERFACE(ifhandle, af)
316 #define SCTP_DEREGISTER_INTERFACE(ifhandle, af)
317 
318 
319 /*************************/
320 /* These are for logging */
321 /*************************/
322 /* return the base ext data pointer */
323 #define SCTP_BUF_EXTEND_BASE(m) (m->m_ext.ext_buf)
324  /* return the refcnt of the data pointer */
325 #define SCTP_BUF_EXTEND_REFCNT(m) (*m->m_ext.ext_cnt)
326 /* return any buffer related flags, this is
327  * used beyond logging for apple only.
328  */
329 #define SCTP_BUF_GET_FLAGS(m) (m->m_flags)
330 
331 /* For BSD this just accesses the M_PKTHDR length
332  * so it operates on an mbuf with hdr flag. Other
333  * O/S's may have separate packet header and mbuf
334  * chain pointers.. thus the macro.
335  */
336 #define SCTP_HEADER_TO_CHAIN(m) (m)
337 #define SCTP_DETACH_HEADER_FROM_CHAIN(m)
338 #define SCTP_HEADER_LEN(m) ((m)->m_pkthdr.len)
339 #define SCTP_GET_HEADER_FOR_OUTPUT(o_pak) 0
340 #define SCTP_RELEASE_HEADER(m)
341 #define SCTP_RELEASE_PKT(m)	sctp_m_freem(m)
342 #define SCTP_ENABLE_UDP_CSUM(m) do { \
343 					m->m_pkthdr.csum_flags = CSUM_UDP; \
344 					m->m_pkthdr.csum_data = offsetof(struct udphdr, uh_sum); \
345 				} while (0)
346 
347 #define SCTP_GET_PKT_VRFID(m, vrf_id)  ((vrf_id = SCTP_DEFAULT_VRFID) != SCTP_DEFAULT_VRFID)
348 
349 
350 
351 /* Attach the chain of data into the sendable packet. */
352 #define SCTP_ATTACH_CHAIN(pak, m, packet_length) do { \
353                                                  pak = m; \
354                                                  pak->m_pkthdr.len = packet_length; \
355                          } while(0)
356 
357 /* Other m_pkthdr type things */
358 #define SCTP_IS_IT_BROADCAST(dst, m) ((m->m_flags & M_PKTHDR) ? in_broadcast(dst, m->m_pkthdr.rcvif) : 0)
359 #define SCTP_IS_IT_LOOPBACK(m) ((m->m_flags & M_PKTHDR) && ((m->m_pkthdr.rcvif == NULL) || (m->m_pkthdr.rcvif->if_type == IFT_LOOP)))
360 
361 
362 /* This converts any input packet header
363  * into the chain of data holders, for BSD
364  * its a NOP.
365  */
366 
367 /* get the v6 hop limit */
368 #define SCTP_GET_HLIM(inp, ro)	in6_selecthlim(&inp->ip_inp.inp, (ro ? (ro->ro_rt ? (ro->ro_rt->rt_ifp) : (NULL)) : (NULL)));
369 
370 /* is the endpoint v6only? */
371 #define SCTP_IPV6_V6ONLY(sctp_inpcb)	((sctp_inpcb)->ip_inp.inp.inp_flags & IN6P_IPV6_V6ONLY)
372 /* is the socket non-blocking? */
373 #define SCTP_SO_IS_NBIO(so)	((so)->so_state & SS_NBIO)
374 #define SCTP_SET_SO_NBIO(so)	((so)->so_state |= SS_NBIO)
375 #define SCTP_CLEAR_SO_NBIO(so)	((so)->so_state &= ~SS_NBIO)
376 /* get the socket type */
377 #define SCTP_SO_TYPE(so)	((so)->so_type)
378 /* Use a macro for renaming sb_cc to sb_acc.
379  * Initially sb_ccc was used, but this broke select() when used
380  * with SCTP sockets.
381  */
382 #define sb_cc sb_acc
383 /* reserve sb space for a socket */
384 #define SCTP_SORESERVE(so, send, recv)	soreserve(so, send, recv)
385 /* wakeup a socket */
386 #define SCTP_SOWAKEUP(so)	wakeup(&(so)->so_timeo)
387 /* clear the socket buffer state */
388 #define SCTP_SB_CLEAR(sb)	\
389 	(sb).sb_cc = 0;		\
390 	(sb).sb_mb = NULL;	\
391 	(sb).sb_mbcnt = 0;
392 
393 #define SCTP_SB_LIMIT_RCV(so) (SOLISTENING(so) ? so->sol_sbrcv_hiwat : so->so_rcv.sb_hiwat)
394 #define SCTP_SB_LIMIT_SND(so) (SOLISTENING(so) ? so->sol_sbsnd_hiwat : so->so_snd.sb_hiwat)
395 
396 /*
397  * routes, output, etc.
398  */
399 typedef struct route sctp_route_t;
400 typedef struct rtentry sctp_rtentry_t;
401 
402 #define SCTP_RTALLOC(ro, vrf_id, fibnum) \
403 	rtalloc_ign_fib((struct route *)ro, 0UL, fibnum)
404 
405 /*
406  * SCTP protocol specific mbuf flags.
407  */
408 #define	M_NOTIFICATION		M_PROTO1	/* SCTP notification */
409 
410 /*
411  * IP output routines
412  */
413 #define SCTP_IP_OUTPUT(result, o_pak, ro, stcb, vrf_id) \
414 { \
415 	int o_flgs = IP_RAWOUTPUT; \
416 	struct sctp_tcb *local_stcb = stcb; \
417 	if (local_stcb && \
418 	    local_stcb->sctp_ep && \
419 	    local_stcb->sctp_ep->sctp_socket) \
420 		o_flgs |= local_stcb->sctp_ep->sctp_socket->so_options & SO_DONTROUTE; \
421 	m_clrprotoflags(o_pak); \
422 	result = ip_output(o_pak, NULL, ro, o_flgs, 0, NULL); \
423 }
424 
425 #define SCTP_IP6_OUTPUT(result, o_pak, ro, ifp, stcb, vrf_id) \
426 { \
427 	struct sctp_tcb *local_stcb = stcb; \
428 	m_clrprotoflags(o_pak); \
429 	if (local_stcb && local_stcb->sctp_ep) \
430 		result = ip6_output(o_pak, \
431 				    ((struct inpcb *)(local_stcb->sctp_ep))->in6p_outputopts, \
432 				    (ro), 0, 0, ifp, NULL); \
433 	else \
434 		result = ip6_output(o_pak, NULL, (ro), 0, 0, ifp, NULL); \
435 }
436 
437 struct mbuf *
438 sctp_get_mbuf_for_msg(unsigned int space_needed,
439     int want_header, int how, int allonebuf, int type);
440 
441 
442 /*
443  * SCTP AUTH
444  */
445 #define SCTP_READ_RANDOM(buf, len)	arc4rand(buf, len, 0)
446 
447 /* map standard crypto API names */
448 #define SCTP_SHA1_CTX		SHA1_CTX
449 #define SCTP_SHA1_INIT		SHA1Init
450 #define SCTP_SHA1_UPDATE	SHA1Update
451 #define SCTP_SHA1_FINAL(x,y)	SHA1Final((caddr_t)x, y)
452 
453 #define SCTP_SHA256_CTX		SHA256_CTX
454 #define SCTP_SHA256_INIT	SHA256_Init
455 #define SCTP_SHA256_UPDATE	SHA256_Update
456 #define SCTP_SHA256_FINAL(x,y)	SHA256_Final((caddr_t)x, y)
457 
458 #define SCTP_DECREMENT_AND_CHECK_REFCOUNT(addr) (atomic_fetchadd_int(addr, -1) == 1)
459 #if defined(INVARIANTS)
460 #define SCTP_SAVE_ATOMIC_DECREMENT(addr, val) \
461 { \
462 	int32_t oldval; \
463 	oldval = atomic_fetchadd_int(addr, -val); \
464 	if (oldval < val) { \
465 		panic("Counter goes negative"); \
466 	} \
467 }
468 #else
469 #define SCTP_SAVE_ATOMIC_DECREMENT(addr, val) \
470 { \
471 	int32_t oldval; \
472 	oldval = atomic_fetchadd_int(addr, -val); \
473 	if (oldval < val) { \
474 		*addr = 0; \
475 	} \
476 }
477 #endif
478 
479 #define SCTP_IS_LISTENING(inp) ((inp->sctp_flags & SCTP_PCB_FLAGS_ACCEPTING) != 0)
480 
481 #endif
482