xref: /freebsd/sys/netinet/sctp_os_bsd.h (revision 1e413cf93298b5b97441a21d9a50fdcd0ee9945e)
1 /*-
2  * Copyright (c) 2006-2007, by Cisco Systems, Inc. All rights reserved.
3  *
4  * Redistribution and use in source and binary forms, with or without
5  * modification, are permitted provided that the following conditions are met:
6  *
7  * a) Redistributions of source code must retain the above copyright notice,
8  *   this list of conditions and the following disclaimer.
9  *
10  * b) Redistributions in binary form must reproduce the above copyright
11  *    notice, this list of conditions and the following disclaimer in
12  *   the documentation and/or other materials provided with the distribution.
13  *
14  * c) Neither the name of Cisco Systems, Inc. nor the names of its
15  *    contributors may be used to endorse or promote products derived
16  *    from this software without specific prior written permission.
17  *
18  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
19  * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO,
20  * THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
21  * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
22  * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
23  * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
24  * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
25  * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
26  * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
27  * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF
28  * THE POSSIBILITY OF SUCH DAMAGE.
29  */
30 #include <sys/cdefs.h>
31 __FBSDID("$FreeBSD$");
32 #ifndef __sctp_os_bsd_h__
33 #define __sctp_os_bsd_h__
34 /*
35  * includes
36  */
37 #include "opt_ipsec.h"
38 #include "opt_compat.h"
39 #include "opt_inet6.h"
40 #include "opt_inet.h"
41 #include "opt_sctp.h"
42 #include <sys/param.h>
43 #include <sys/ktr.h>
44 #include <sys/systm.h>
45 #include <sys/malloc.h>
46 #include <sys/kernel.h>
47 #include <sys/sysctl.h>
48 #include <sys/mbuf.h>
49 #include <sys/protosw.h>
50 #include <sys/socket.h>
51 #include <sys/socketvar.h>
52 #include <sys/jail.h>
53 #include <sys/sysctl.h>
54 #include <sys/resourcevar.h>
55 #include <sys/uio.h>
56 #include <sys/lock.h>
57 #include <sys/rwlock.h>
58 #include <sys/kthread.h>
59 #include <sys/priv.h>
60 #include <sys/random.h>
61 #include <sys/limits.h>
62 #include <sys/queue.h>
63 #include <machine/cpu.h>
64 
65 #include <net/if.h>
66 #include <net/if_types.h>
67 #include <net/if_var.h>
68 #include <net/route.h>
69 
70 #include <netinet/in.h>
71 #include <netinet/in_systm.h>
72 #include <netinet/ip.h>
73 #include <netinet/in_pcb.h>
74 #include <netinet/in_var.h>
75 #include <netinet/ip_var.h>
76 #include <netinet/ip_icmp.h>
77 #include <netinet/icmp_var.h>
78 
79 
80 #ifdef IPSEC
81 #include <netipsec/ipsec.h>
82 #include <netipsec/key.h>
83 #endif				/* IPSEC */
84 
85 #ifdef INET6
86 #include <sys/domain.h>
87 #ifdef IPSEC
88 #include <netipsec/ipsec6.h>
89 #endif
90 #include <netinet/ip6.h>
91 #include <netinet6/ip6_var.h>
92 #include <netinet6/in6_pcb.h>
93 #include <netinet/icmp6.h>
94 #include <netinet6/ip6protosw.h>
95 #include <netinet6/nd6.h>
96 #include <netinet6/scope6_var.h>
97 #endif				/* INET6 */
98 
99 
100 #include <netinet/ip_options.h>
101 
102 #ifndef in6pcb
103 #define in6pcb		inpcb
104 #endif
105 /* Declare all the malloc names for all the various mallocs */
106 MALLOC_DECLARE(SCTP_M_MAP);
107 MALLOC_DECLARE(SCTP_M_STRMI);
108 MALLOC_DECLARE(SCTP_M_STRMO);
109 MALLOC_DECLARE(SCTP_M_ASC_ADDR);
110 MALLOC_DECLARE(SCTP_M_ASC_IT);
111 MALLOC_DECLARE(SCTP_M_AUTH_CL);
112 MALLOC_DECLARE(SCTP_M_AUTH_KY);
113 MALLOC_DECLARE(SCTP_M_AUTH_HL);
114 MALLOC_DECLARE(SCTP_M_AUTH_IF);
115 MALLOC_DECLARE(SCTP_M_STRESET);
116 MALLOC_DECLARE(SCTP_M_CMSG);
117 MALLOC_DECLARE(SCTP_M_COPYAL);
118 MALLOC_DECLARE(SCTP_M_VRF);
119 MALLOC_DECLARE(SCTP_M_IFA);
120 MALLOC_DECLARE(SCTP_M_IFN);
121 MALLOC_DECLARE(SCTP_M_TIMW);
122 MALLOC_DECLARE(SCTP_M_MVRF);
123 MALLOC_DECLARE(SCTP_M_ITER);
124 MALLOC_DECLARE(SCTP_M_SOCKOPT);
125 
126 #if defined(SCTP_LOCAL_TRACE_BUF)
127 
128 #define SCTP_GET_CYCLECOUNT get_cyclecount()
129 #define SCTP_CTR6 sctp_log_trace
130 
131 #else
132 #define SCTP_CTR6 CTR6
133 #endif
134 
135 
136 /*
137  *
138  */
139 #define USER_ADDR_NULL	(NULL)	/* FIX ME: temp */
140 #define SCTP_LIST_EMPTY(list)	LIST_EMPTY(list)
141 
142 #if defined(SCTP_DEBUG)
143 #define SCTPDBG(level, params...)					\
144 {									\
145     do {								\
146 	if (sctp_debug_on & level ) {					\
147 	    printf(params);						\
148 	}								\
149     } while (0);							\
150 }
151 #define SCTPDBG_ADDR(level, addr)					\
152 {									\
153     do {								\
154 	if (sctp_debug_on & level ) {					\
155 	    sctp_print_address(addr);					\
156 	}								\
157     } while (0);							\
158 }
159 #define SCTPDBG_PKT(level, iph, sh)					\
160 {									\
161     do {								\
162 	    if (sctp_debug_on & level) {				\
163 		    sctp_print_address_pkt(iph, sh);			\
164 	    }								\
165     } while (0);							\
166 }
167 #else
168 #define SCTPDBG(level, params...)
169 #define SCTPDBG_ADDR(level, addr)
170 #define SCTPDBG_PKT(level, iph, sh)
171 #endif
172 #define SCTP_PRINTF(params...)	printf(params)
173 
174 #ifdef SCTP_LTRACE_CHUNKS
175 #define SCTP_LTRACE_CHK(a, b, c, d) if(sctp_logging_level & SCTP_LTRACE_CHUNK_ENABLE) CTR6(KTR_SUBSYS, "SCTP:%d[%d]:%x-%x-%x-%x", SCTP_LOG_CHUNK_PROC, 0, a, b, c, d)
176 #else
177 #define SCTP_LTRACE_CHK(a, b, c, d)
178 #endif
179 
180 #ifdef SCTP_LTRACE_ERRORS
181 #define SCTP_LTRACE_ERR_RET_PKT(m, inp, stcb, net, file, err) if(sctp_logging_level & SCTP_LTRACE_ERROR_ENABLE) \
182                                                          printf("mbuf:%p inp:%p stcb:%p net:%p file:%x line:%d error:%d\n", \
183 								     m, inp, stcb, net, file, __LINE__, err);
184 #define SCTP_LTRACE_ERR_RET(inp, stcb, net, file, err) if(sctp_logging_level & SCTP_LTRACE_ERROR_ENABLE) \
185                                                           printf("inp:%p stcb:%p net:%p file:%x line:%d error:%d\n", \
186 								     inp, stcb, net, file, __LINE__, err);
187 #else
188 #define SCTP_LTRACE_ERR_RET_PKT(m, inp, stcb, net, file, err)
189 #define SCTP_LTRACE_ERR_RET(inp, stcb, net, file, err)
190 #endif
191 
192 
193 /*
194  * Local address and interface list handling
195  */
196 #define SCTP_MAX_VRF_ID		0
197 #define SCTP_SIZE_OF_VRF_HASH	3
198 #define SCTP_IFNAMSIZ		IFNAMSIZ
199 #define SCTP_DEFAULT_VRFID	0
200 #define SCTP_VRF_ADDR_HASH_SIZE	16
201 #define SCTP_VRF_IFN_HASH_SIZE	3
202 #define	SCTP_INIT_VRF_TABLEID(vrf)
203 
204 #define SCTP_IFN_IS_IFT_LOOP(ifn) ((ifn)->ifn_type == IFT_LOOP)
205 
206 /*
207  * Access to IFN's to help with src-addr-selection
208  */
209 /* This could return VOID if the index works but for BSD we provide both. */
210 #define SCTP_GET_IFN_VOID_FROM_ROUTE(ro) (void *)ro->ro_rt->rt_ifp
211 #define SCTP_GET_IF_INDEX_FROM_ROUTE(ro) (ro)->ro_rt->rt_ifp->if_index
212 #define SCTP_ROUTE_HAS_VALID_IFN(ro) ((ro)->ro_rt && (ro)->ro_rt->rt_ifp)
213 
214 /*
215  * general memory allocation
216  */
217 #define SCTP_MALLOC(var, type, size, name) \
218     do { \
219 	MALLOC(var, type, size, name, M_NOWAIT); \
220     } while (0)
221 
222 #define SCTP_FREE(var, type)	FREE(var, type)
223 
224 #define SCTP_MALLOC_SONAME(var, type, size) \
225     do { \
226 	MALLOC(var, type, size, M_SONAME, M_WAITOK | M_ZERO); \
227     } while (0)
228 
229 #define SCTP_FREE_SONAME(var)	FREE(var, M_SONAME)
230 
231 #define SCTP_PROCESS_STRUCT struct proc *
232 
233 /*
234  * zone allocation functions
235  */
236 #include <vm/uma.h>
237 /* SCTP_ZONE_INIT: initialize the zone */
238 typedef struct uma_zone *sctp_zone_t;
239 
240 #define UMA_ZFLAG_FULL	0x0020
241 #define SCTP_ZONE_INIT(zone, name, size, number) { \
242 	zone = uma_zcreate(name, size, NULL, NULL, NULL, NULL, UMA_ALIGN_PTR,\
243 		UMA_ZFLAG_FULL); \
244 	uma_zone_set_max(zone, number); \
245 }
246 
247 /* SCTP_ZONE_GET: allocate element from the zone */
248 #define SCTP_ZONE_GET(zone, type) \
249 	(type *)uma_zalloc(zone, M_NOWAIT);
250 
251 /* SCTP_ZONE_FREE: free element from the zone */
252 #define SCTP_ZONE_FREE(zone, element) \
253 	uma_zfree(zone, element);
254 #define SCTP_HASH_INIT(size, hashmark) hashinit_flags(size, M_PCB, hashmark, HASH_NOWAIT)
255 #define SCTP_HASH_FREE(table, hashmark) hashdestroy(table, M_PCB, hashmark)
256 
257 #define SCTP_M_COPYM	m_copym
258 
259 /*
260  * timers
261  */
262 #include <sys/callout.h>
263 typedef struct callout sctp_os_timer_t;
264 
265 #define SCTP_OS_TIMER_INIT(tmr)	callout_init(tmr, 1)
266 #define SCTP_OS_TIMER_START	callout_reset
267 #define SCTP_OS_TIMER_STOP	callout_stop
268 #define SCTP_OS_TIMER_STOP_DRAIN callout_drain
269 #define SCTP_OS_TIMER_PENDING	callout_pending
270 #define SCTP_OS_TIMER_ACTIVE	callout_active
271 #define SCTP_OS_TIMER_DEACTIVATE callout_deactivate
272 
273 #define sctp_get_tick_count() (ticks)
274 
275 /* The packed define for 64 bit platforms */
276 #define SCTP_PACKED __attribute__((packed))
277 #define SCTP_UNUSED __attribute__((unused))
278 
279 /*
280  * Functions
281  */
282 /* Mbuf manipulation and access macros  */
283 #define SCTP_BUF_LEN(m) (m->m_len)
284 #define SCTP_BUF_NEXT(m) (m->m_next)
285 #define SCTP_BUF_NEXT_PKT(m) (m->m_nextpkt)
286 #define SCTP_BUF_RESV_UF(m, size) m->m_data += size
287 #define SCTP_BUF_AT(m, size) m->m_data + size
288 #define SCTP_BUF_IS_EXTENDED(m) (m->m_flags & M_EXT)
289 #define SCTP_BUF_EXTEND_SIZE(m) (m->m_ext.ext_size)
290 #define SCTP_BUF_TYPE(m) (m->m_type)
291 #define SCTP_BUF_RECVIF(m) (m->m_pkthdr.rcvif)
292 #define SCTP_BUF_PREPEND	M_PREPEND
293 
294 #define SCTP_ALIGN_TO_END(m, len) if(m->m_flags & M_PKTHDR) { \
295                                      MH_ALIGN(m, len); \
296                                   } else if ((m->m_flags & M_EXT) == 0) { \
297                                      M_ALIGN(m, len); \
298                                   }
299 
300 /* We make it so if you have up to 4 threads
301  * writting based on the default size of
302  * the packet log 65 k, that would be
303  * 4 16k packets before we would hit
304  * a problem.
305  */
306 #define SCTP_PKTLOG_WRITERS_NEED_LOCK 3
307 
308 /*************************/
309 /*      MTU              */
310 /*************************/
311 #define SCTP_GATHER_MTU_FROM_IFN_INFO(ifn, ifn_index, af) ((struct ifnet *)ifn)->if_mtu
312 #define SCTP_GATHER_MTU_FROM_ROUTE(sctp_ifa, sa, rt) ((rt != NULL) ? rt->rt_rmx.rmx_mtu : 0)
313 #define SCTP_GATHER_MTU_FROM_INTFC(sctp_ifn) ((sctp_ifn->ifn_p != NULL) ? ((struct ifnet *)(sctp_ifn->ifn_p))->if_mtu : 0)
314 #define SCTP_SET_MTU_OF_ROUTE(sa, rt, mtu) do { \
315                                               if (rt != NULL) \
316                                                  rt->rt_rmx.rmx_mtu = mtu; \
317                                            } while(0)
318 
319 /* (de-)register interface event notifications */
320 #define SCTP_REGISTER_INTERFACE(ifhandle, af)
321 #define SCTP_DEREGISTER_INTERFACE(ifhandle, af)
322 
323 
324 /*************************/
325 /* These are for logging */
326 /*************************/
327 /* return the base ext data pointer */
328 #define SCTP_BUF_EXTEND_BASE(m) (m->m_ext.ext_buf)
329  /* return the refcnt of the data pointer */
330 #define SCTP_BUF_EXTEND_REFCNT(m) (*m->m_ext.ref_cnt)
331 /* return any buffer related flags, this is
332  * used beyond logging for apple only.
333  */
334 #define SCTP_BUF_GET_FLAGS(m) (m->m_flags)
335 
336 /* For BSD this just accesses the M_PKTHDR length
337  * so it operates on an mbuf with hdr flag. Other
338  * O/S's may have seperate packet header and mbuf
339  * chain pointers.. thus the macro.
340  */
341 #define SCTP_HEADER_TO_CHAIN(m) (m)
342 #define SCTP_DETACH_HEADER_FROM_CHAIN(m)
343 #define SCTP_HEADER_LEN(m) (m->m_pkthdr.len)
344 #define SCTP_GET_HEADER_FOR_OUTPUT(o_pak) 0
345 #define SCTP_RELEASE_HEADER(m)
346 #define SCTP_RELEASE_PKT(m)	sctp_m_freem(m)
347 
348 #define SCTP_GET_PKT_VRFID(m, vrf_id)  ((vrf_id = SCTP_DEFAULT_VRFID) != SCTP_DEFAULT_VRFID)
349 
350 
351 
352 /* Attach the chain of data into the sendable packet. */
353 #define SCTP_ATTACH_CHAIN(pak, m, packet_length) do { \
354                                                  pak = m; \
355                                                  pak->m_pkthdr.len = packet_length; \
356                          } while(0)
357 
358 /* Other m_pkthdr type things */
359 #define SCTP_IS_IT_BROADCAST(dst, m) ((m->m_flags & M_PKTHDR) ? in_broadcast(dst, m->m_pkthdr.rcvif) : 0)
360 #define SCTP_IS_IT_LOOPBACK(m) ((m->m_flags & M_PKTHDR) && ((m->m_pkthdr.rcvif == NULL) || (m->m_pkthdr.rcvif->if_type == IFT_LOOP)))
361 
362 
363 /* This converts any input packet header
364  * into the chain of data holders, for BSD
365  * its a NOP.
366  */
367 
368 /* Macro's for getting length from V6/V4 header */
369 #define SCTP_GET_IPV4_LENGTH(iph) (iph->ip_len)
370 #define SCTP_GET_IPV6_LENGTH(ip6) (ntohs(ip6->ip6_plen))
371 
372 /* get the v6 hop limit */
373 #define SCTP_GET_HLIM(inp, ro)	in6_selecthlim((struct in6pcb *)&inp->ip_inp.inp, (ro ? (ro->ro_rt ? (ro->ro_rt->rt_ifp) : (NULL)) : (NULL)));
374 
375 /* is the endpoint v6only? */
376 #define SCTP_IPV6_V6ONLY(inp)	(((struct inpcb *)inp)->inp_flags & IN6P_IPV6_V6ONLY)
377 /* is the socket non-blocking? */
378 #define SCTP_SO_IS_NBIO(so)	((so)->so_state & SS_NBIO)
379 #define SCTP_SET_SO_NBIO(so)	((so)->so_state |= SS_NBIO)
380 #define SCTP_CLEAR_SO_NBIO(so)	((so)->so_state &= ~SS_NBIO)
381 /* get the socket type */
382 #define SCTP_SO_TYPE(so)	((so)->so_type)
383 /* reserve sb space for a socket */
384 #define SCTP_SORESERVE(so, send, recv)	soreserve(so, send, recv)
385 /* wakeup a socket */
386 #define SCTP_SOWAKEUP(so)	wakeup(&(so)->so_timeo)
387 /* clear the socket buffer state */
388 #define SCTP_SB_CLEAR(sb)	\
389 	(sb).sb_cc = 0;		\
390 	(sb).sb_mb = NULL;	\
391 	(sb).sb_mbcnt = 0;
392 
393 #define SCTP_SB_LIMIT_RCV(so) so->so_rcv.sb_hiwat
394 #define SCTP_SB_LIMIT_SND(so) so->so_snd.sb_hiwat
395 
396 /*
397  * routes, output, etc.
398  */
399 typedef struct route sctp_route_t;
400 typedef struct rtentry sctp_rtentry_t;
401 
402 #define SCTP_RTALLOC(ro, vrf_id) rtalloc_ign((struct route *)ro, 0UL)
403 
404 /* Future zero copy wakeup/send  function */
405 #define SCTP_ZERO_COPY_EVENT(inp, so)
406 /* This is re-pulse ourselves for sendbuf */
407 #define SCTP_ZERO_COPY_SENDQ_EVENT(inp, so)
408 
409 /*
410  * IP output routines
411  */
412 #define SCTP_IP_OUTPUT(result, o_pak, ro, stcb, vrf_id) \
413 { \
414 	int o_flgs = 0; \
415 	if (stcb && stcb->sctp_ep && stcb->sctp_ep->sctp_socket) { \
416 		o_flgs = IP_RAWOUTPUT | (stcb->sctp_ep->sctp_socket->so_options & SO_DONTROUTE); \
417 	} else { \
418 		o_flgs = IP_RAWOUTPUT; \
419 	} \
420 	result = ip_output(o_pak, NULL, ro, o_flgs, 0, NULL); \
421 }
422 
423 #define SCTP_IP6_OUTPUT(result, o_pak, ro, ifp, stcb, vrf_id) \
424 { \
425  	if (stcb && stcb->sctp_ep) \
426 		result = ip6_output(o_pak, \
427 				    ((struct in6pcb *)(stcb->sctp_ep))->in6p_outputopts, \
428 				    (ro), 0, 0, ifp, NULL); \
429 	else \
430 		result = ip6_output(o_pak, NULL, (ro), 0, 0, ifp, NULL); \
431 }
432 
433 struct mbuf *
434 sctp_get_mbuf_for_msg(unsigned int space_needed,
435     int want_header, int how, int allonebuf, int type);
436 
437 
438 /*
439  * SCTP AUTH
440  */
441 #define HAVE_SHA2
442 
443 #define SCTP_READ_RANDOM(buf, len)	read_random(buf, len)
444 
445 #ifdef USE_SCTP_SHA1
446 #include <netinet/sctp_sha1.h>
447 #else
448 #include <crypto/sha1.h>
449 /* map standard crypto API names */
450 #define SHA1_Init	SHA1Init
451 #define SHA1_Update	SHA1Update
452 #define SHA1_Final(x,y)	SHA1Final((caddr_t)x, y)
453 #endif
454 
455 #if defined(HAVE_SHA2)
456 #include <crypto/sha2/sha2.h>
457 #endif
458 
459 #include <sys/md5.h>
460 /* map standard crypto API names */
461 #define MD5_Init	MD5Init
462 #define MD5_Update	MD5Update
463 #define MD5_Final	MD5Final
464 
465 #endif
466