1 /*- 2 * Copyright (c) 1989 Stephen Deering. 3 * Copyright (c) 1992, 1993 4 * The Regents of the University of California. All rights reserved. 5 * 6 * This code is derived from software contributed to Berkeley by 7 * Stephen Deering of Stanford University. 8 * 9 * Redistribution and use in source and binary forms, with or without 10 * modification, are permitted provided that the following conditions 11 * are met: 12 * 1. Redistributions of source code must retain the above copyright 13 * notice, this list of conditions and the following disclaimer. 14 * 2. Redistributions in binary form must reproduce the above copyright 15 * notice, this list of conditions and the following disclaimer in the 16 * documentation and/or other materials provided with the distribution. 17 * 3. Neither the name of the University nor the names of its contributors 18 * may be used to endorse or promote products derived from this software 19 * without specific prior written permission. 20 * 21 * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND 22 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE 23 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE 24 * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE 25 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL 26 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS 27 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) 28 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT 29 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY 30 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF 31 * SUCH DAMAGE. 32 * 33 * @(#)ip_mroute.h 8.1 (Berkeley) 6/10/93 34 * $FreeBSD$ 35 */ 36 37 #ifndef _NETINET_IP_MROUTE_H_ 38 #define _NETINET_IP_MROUTE_H_ 39 40 /* 41 * Definitions for IP multicast forwarding. 42 * 43 * Written by David Waitzman, BBN Labs, August 1988. 44 * Modified by Steve Deering, Stanford, February 1989. 45 * Modified by Ajit Thyagarajan, PARC, August 1993. 46 * Modified by Ajit Thyagarajan, PARC, August 1994. 47 * Modified by Ahmed Helmy, SGI, June 1996. 48 * Modified by Pavlin Radoslavov, ICSI, October 2002. 49 * 50 * MROUTING Revision: 3.3.1.3 51 * and PIM-SMv2 and PIM-DM support, advanced API support, 52 * bandwidth metering and signaling. 53 */ 54 55 /* 56 * Multicast Routing set/getsockopt commands. 57 */ 58 #define MRT_INIT 100 /* initialize forwarder */ 59 #define MRT_DONE 101 /* shut down forwarder */ 60 #define MRT_ADD_VIF 102 /* create virtual interface */ 61 #define MRT_DEL_VIF 103 /* delete virtual interface */ 62 #define MRT_ADD_MFC 104 /* insert forwarding cache entry */ 63 #define MRT_DEL_MFC 105 /* delete forwarding cache entry */ 64 #define MRT_VERSION 106 /* get kernel version number */ 65 #define MRT_ASSERT 107 /* enable assert processing */ 66 #define MRT_PIM MRT_ASSERT /* enable PIM processing */ 67 #define MRT_API_SUPPORT 109 /* supported MRT API */ 68 #define MRT_API_CONFIG 110 /* config MRT API */ 69 #define MRT_ADD_BW_UPCALL 111 /* create bandwidth monitor */ 70 #define MRT_DEL_BW_UPCALL 112 /* delete bandwidth monitor */ 71 72 /* 73 * Types and macros for handling bitmaps with one bit per virtual interface. 74 */ 75 #define MAXVIFS 32 76 typedef u_long vifbitmap_t; 77 typedef u_short vifi_t; /* type of a vif index */ 78 #define ALL_VIFS (vifi_t)-1 79 80 #define VIFM_SET(n, m) ((m) |= (1 << (n))) 81 #define VIFM_CLR(n, m) ((m) &= ~(1 << (n))) 82 #define VIFM_ISSET(n, m) ((m) & (1 << (n))) 83 #define VIFM_CLRALL(m) ((m) = 0x00000000) 84 #define VIFM_COPY(mfrom, mto) ((mto) = (mfrom)) 85 #define VIFM_SAME(m1, m2) ((m1) == (m2)) 86 87 struct mfc; 88 89 /* 90 * Argument structure for MRT_ADD_VIF. 91 * (MRT_DEL_VIF takes a single vifi_t argument.) 92 */ 93 struct vifctl { 94 vifi_t vifc_vifi; /* the index of the vif to be added */ 95 u_char vifc_flags; /* VIFF_ flags defined below */ 96 u_char vifc_threshold; /* min ttl required to forward on vif */ 97 u_int vifc_rate_limit; /* max rate */ 98 struct in_addr vifc_lcl_addr; /* local interface address */ 99 struct in_addr vifc_rmt_addr; /* remote address (tunnels only) */ 100 }; 101 102 #define VIFF_TUNNEL 0x1 /* no-op; retained for old source */ 103 #define VIFF_SRCRT 0x2 /* no-op; retained for old source */ 104 #define VIFF_REGISTER 0x4 /* used for PIM Register encap/decap */ 105 106 /* 107 * Argument structure for MRT_ADD_MFC and MRT_DEL_MFC 108 * XXX if you change this, make sure to change struct mfcctl2 as well. 109 */ 110 struct mfcctl { 111 struct in_addr mfcc_origin; /* ip origin of mcasts */ 112 struct in_addr mfcc_mcastgrp; /* multicast group associated*/ 113 vifi_t mfcc_parent; /* incoming vif */ 114 u_char mfcc_ttls[MAXVIFS]; /* forwarding ttls on vifs */ 115 }; 116 117 /* 118 * The new argument structure for MRT_ADD_MFC and MRT_DEL_MFC overlays 119 * and extends the old struct mfcctl. 120 */ 121 struct mfcctl2 { 122 /* the mfcctl fields */ 123 struct in_addr mfcc_origin; /* ip origin of mcasts */ 124 struct in_addr mfcc_mcastgrp; /* multicast group associated*/ 125 vifi_t mfcc_parent; /* incoming vif */ 126 u_char mfcc_ttls[MAXVIFS]; /* forwarding ttls on vifs */ 127 128 /* extension fields */ 129 uint8_t mfcc_flags[MAXVIFS]; /* the MRT_MFC_FLAGS_* flags */ 130 struct in_addr mfcc_rp; /* the RP address */ 131 }; 132 /* 133 * The advanced-API flags. 134 * 135 * The MRT_MFC_FLAGS_XXX API flags are also used as flags 136 * for the mfcc_flags field. 137 */ 138 #define MRT_MFC_FLAGS_DISABLE_WRONGVIF (1 << 0) /* disable WRONGVIF signals */ 139 #define MRT_MFC_FLAGS_BORDER_VIF (1 << 1) /* border vif */ 140 #define MRT_MFC_RP (1 << 8) /* enable RP address */ 141 #define MRT_MFC_BW_UPCALL (1 << 9) /* enable bw upcalls */ 142 #define MRT_MFC_FLAGS_ALL (MRT_MFC_FLAGS_DISABLE_WRONGVIF | \ 143 MRT_MFC_FLAGS_BORDER_VIF) 144 #define MRT_API_FLAGS_ALL (MRT_MFC_FLAGS_ALL | \ 145 MRT_MFC_RP | \ 146 MRT_MFC_BW_UPCALL) 147 148 /* 149 * Structure for installing or delivering an upcall if the 150 * measured bandwidth is above or below a threshold. 151 * 152 * User programs (e.g. daemons) may have a need to know when the 153 * bandwidth used by some data flow is above or below some threshold. 154 * This interface allows the userland to specify the threshold (in 155 * bytes and/or packets) and the measurement interval. Flows are 156 * all packet with the same source and destination IP address. 157 * At the moment the code is only used for multicast destinations 158 * but there is nothing that prevents its use for unicast. 159 * 160 * The measurement interval cannot be shorter than some Tmin (currently, 3s). 161 * The threshold is set in packets and/or bytes per_interval. 162 * 163 * Measurement works as follows: 164 * 165 * For >= measurements: 166 * The first packet marks the start of a measurement interval. 167 * During an interval we count packets and bytes, and when we 168 * pass the threshold we deliver an upcall and we are done. 169 * The first packet after the end of the interval resets the 170 * count and restarts the measurement. 171 * 172 * For <= measurement: 173 * We start a timer to fire at the end of the interval, and 174 * then for each incoming packet we count packets and bytes. 175 * When the timer fires, we compare the value with the threshold, 176 * schedule an upcall if we are below, and restart the measurement 177 * (reschedule timer and zero counters). 178 */ 179 180 struct bw_data { 181 struct timeval b_time; 182 uint64_t b_packets; 183 uint64_t b_bytes; 184 }; 185 186 struct bw_upcall { 187 struct in_addr bu_src; /* source address */ 188 struct in_addr bu_dst; /* destination address */ 189 uint32_t bu_flags; /* misc flags (see below) */ 190 #define BW_UPCALL_UNIT_PACKETS (1 << 0) /* threshold (in packets) */ 191 #define BW_UPCALL_UNIT_BYTES (1 << 1) /* threshold (in bytes) */ 192 #define BW_UPCALL_GEQ (1 << 2) /* upcall if bw >= threshold */ 193 #define BW_UPCALL_LEQ (1 << 3) /* upcall if bw <= threshold */ 194 #define BW_UPCALL_DELETE_ALL (1 << 4) /* delete all upcalls for s,d*/ 195 struct bw_data bu_threshold; /* the bw threshold */ 196 struct bw_data bu_measured; /* the measured bw */ 197 }; 198 199 /* max. number of upcalls to deliver together */ 200 #define BW_UPCALLS_MAX 128 201 /* min. threshold time interval for bandwidth measurement */ 202 #define BW_UPCALL_THRESHOLD_INTERVAL_MIN_SEC 3 203 #define BW_UPCALL_THRESHOLD_INTERVAL_MIN_USEC 0 204 205 /* 206 * The kernel's multicast routing statistics. 207 */ 208 struct mrtstat { 209 uint64_t mrts_mfc_lookups; /* # forw. cache hash table hits */ 210 uint64_t mrts_mfc_misses; /* # forw. cache hash table misses */ 211 uint64_t mrts_upcalls; /* # calls to multicast routing daemon */ 212 uint64_t mrts_no_route; /* no route for packet's origin */ 213 uint64_t mrts_bad_tunnel; /* malformed tunnel options */ 214 uint64_t mrts_cant_tunnel; /* no room for tunnel options */ 215 uint64_t mrts_wrong_if; /* arrived on wrong interface */ 216 uint64_t mrts_upq_ovflw; /* upcall Q overflow */ 217 uint64_t mrts_cache_cleanups; /* # entries with no upcalls */ 218 uint64_t mrts_drop_sel; /* pkts dropped selectively */ 219 uint64_t mrts_q_overflow; /* pkts dropped - Q overflow */ 220 uint64_t mrts_pkt2large; /* pkts dropped - size > BKT SIZE */ 221 uint64_t mrts_upq_sockfull; /* upcalls dropped - socket full */ 222 }; 223 224 #ifdef _KERNEL 225 #define MRTSTAT_ADD(name, val) \ 226 VNET_PCPUSTAT_ADD(struct mrtstat, mrtstat, name, (val)) 227 #define MRTSTAT_INC(name) MRTSTAT_ADD(name, 1) 228 #endif 229 230 /* 231 * Argument structure used by mrouted to get src-grp pkt counts 232 */ 233 struct sioc_sg_req { 234 struct in_addr src; 235 struct in_addr grp; 236 u_long pktcnt; 237 u_long bytecnt; 238 u_long wrong_if; 239 }; 240 241 /* 242 * Argument structure used by mrouted to get vif pkt counts 243 */ 244 struct sioc_vif_req { 245 vifi_t vifi; /* vif number */ 246 u_long icount; /* Input packet count on vif */ 247 u_long ocount; /* Output packet count on vif */ 248 u_long ibytes; /* Input byte count on vif */ 249 u_long obytes; /* Output byte count on vif */ 250 }; 251 252 253 /* 254 * The kernel's virtual-interface structure. 255 */ 256 struct vif { 257 u_char v_flags; /* VIFF_ flags defined above */ 258 u_char v_threshold; /* min ttl required to forward on vif*/ 259 struct in_addr v_lcl_addr; /* local interface address */ 260 struct in_addr v_rmt_addr; /* remote address (tunnels only) */ 261 struct ifnet *v_ifp; /* pointer to interface */ 262 u_long v_pkt_in; /* # pkts in on interface */ 263 u_long v_pkt_out; /* # pkts out on interface */ 264 u_long v_bytes_in; /* # bytes in on interface */ 265 u_long v_bytes_out; /* # bytes out on interface */ 266 }; 267 268 #ifdef _KERNEL 269 /* 270 * The kernel's multicast forwarding cache entry structure 271 */ 272 struct mfc { 273 LIST_ENTRY(mfc) mfc_hash; 274 struct in_addr mfc_origin; /* IP origin of mcasts */ 275 struct in_addr mfc_mcastgrp; /* multicast group associated*/ 276 vifi_t mfc_parent; /* incoming vif */ 277 u_char mfc_ttls[MAXVIFS]; /* forwarding ttls on vifs */ 278 u_long mfc_pkt_cnt; /* pkt count for src-grp */ 279 u_long mfc_byte_cnt; /* byte count for src-grp */ 280 u_long mfc_wrong_if; /* wrong if for src-grp */ 281 int mfc_expire; /* time to clean entry up */ 282 struct timeval mfc_last_assert; /* last time I sent an assert*/ 283 uint8_t mfc_flags[MAXVIFS]; /* the MRT_MFC_FLAGS_* flags */ 284 struct in_addr mfc_rp; /* the RP address */ 285 struct bw_meter *mfc_bw_meter; /* list of bandwidth meters */ 286 u_long mfc_nstall; /* # of packets awaiting mfc */ 287 TAILQ_HEAD(, rtdetq) mfc_stall; /* q of packets awaiting mfc */ 288 }; 289 #endif /* _KERNEL */ 290 291 /* 292 * Struct used to communicate from kernel to multicast router 293 * note the convenient similarity to an IP packet 294 */ 295 struct igmpmsg { 296 uint32_t unused1; 297 uint32_t unused2; 298 u_char im_msgtype; /* what type of message */ 299 #define IGMPMSG_NOCACHE 1 /* no MFC in the kernel */ 300 #define IGMPMSG_WRONGVIF 2 /* packet came from wrong interface */ 301 #define IGMPMSG_WHOLEPKT 3 /* PIM pkt for user level encap. */ 302 #define IGMPMSG_BW_UPCALL 4 /* BW monitoring upcall */ 303 u_char im_mbz; /* must be zero */ 304 u_char im_vif; /* vif rec'd on */ 305 u_char unused3; 306 struct in_addr im_src, im_dst; 307 }; 308 309 #ifdef _KERNEL 310 /* 311 * Argument structure used for pkt info. while upcall is made 312 */ 313 struct rtdetq { 314 TAILQ_ENTRY(rtdetq) rte_link; 315 struct mbuf *m; /* A copy of the packet */ 316 struct ifnet *ifp; /* Interface pkt came in on */ 317 vifi_t xmt_vif; /* Saved copy of imo_multicast_vif */ 318 }; 319 #define MAX_UPQ 4 /* max. no of pkts in upcall Q */ 320 #endif /* _KERNEL */ 321 322 /* 323 * Structure for measuring the bandwidth and sending an upcall if the 324 * measured bandwidth is above or below a threshold. 325 */ 326 struct bw_meter { 327 struct bw_meter *bm_mfc_next; /* next bw meter (same mfc) */ 328 struct bw_meter *bm_time_next; /* next bw meter (same time) */ 329 uint32_t bm_time_hash; /* the time hash value */ 330 struct mfc *bm_mfc; /* the corresponding mfc */ 331 uint32_t bm_flags; /* misc flags (see below) */ 332 #define BW_METER_UNIT_PACKETS (1 << 0) /* threshold (in packets) */ 333 #define BW_METER_UNIT_BYTES (1 << 1) /* threshold (in bytes) */ 334 #define BW_METER_GEQ (1 << 2) /* upcall if bw >= threshold */ 335 #define BW_METER_LEQ (1 << 3) /* upcall if bw <= threshold */ 336 #define BW_METER_USER_FLAGS (BW_METER_UNIT_PACKETS | \ 337 BW_METER_UNIT_BYTES | \ 338 BW_METER_GEQ | \ 339 BW_METER_LEQ) 340 341 #define BW_METER_UPCALL_DELIVERED (1 << 24) /* upcall was delivered */ 342 343 struct bw_data bm_threshold; /* the upcall threshold */ 344 struct bw_data bm_measured; /* the measured bw */ 345 struct timeval bm_start_time; /* abs. time */ 346 }; 347 348 #ifdef _KERNEL 349 350 struct sockopt; 351 352 extern int (*ip_mrouter_set)(struct socket *, struct sockopt *); 353 extern int (*ip_mrouter_get)(struct socket *, struct sockopt *); 354 extern int (*ip_mrouter_done)(void); 355 extern int (*mrt_ioctl)(u_long, caddr_t, int); 356 357 #endif /* _KERNEL */ 358 359 #endif /* _NETINET_IP_MROUTE_H_ */ 360