xref: /freebsd/sys/netgraph/bluetooth/socket/ng_btsocket.c (revision 1e413cf93298b5b97441a21d9a50fdcd0ee9945e)
1 /*
2  * ng_btsocket.c
3  */
4 
5 /*-
6  * Copyright (c) 2001-2002 Maksim Yevmenkin <m_evmenkin@yahoo.com>
7  * All rights reserved.
8  *
9  * Redistribution and use in source and binary forms, with or without
10  * modification, are permitted provided that the following conditions
11  * are met:
12  * 1. Redistributions of source code must retain the above copyright
13  *    notice, this list of conditions and the following disclaimer.
14  * 2. Redistributions in binary form must reproduce the above copyright
15  *    notice, this list of conditions and the following disclaimer in the
16  *    documentation and/or other materials provided with the distribution.
17  *
18  * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
19  * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
20  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
21  * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
22  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
23  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
24  * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
25  * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
26  * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
27  * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
28  * SUCH DAMAGE.
29  *
30  * $Id: ng_btsocket.c,v 1.4 2003/09/14 23:29:06 max Exp $
31  * $FreeBSD$
32  */
33 
34 #include <sys/param.h>
35 #include <sys/systm.h>
36 #include <sys/bitstring.h>
37 #include <sys/errno.h>
38 #include <sys/domain.h>
39 #include <sys/kernel.h>
40 #include <sys/lock.h>
41 #include <sys/mbuf.h>
42 #include <sys/mutex.h>
43 #include <sys/protosw.h>
44 #include <sys/socket.h>
45 #include <sys/socketvar.h>
46 #include <sys/sysctl.h>
47 #include <sys/taskqueue.h>
48 #include <netgraph/ng_message.h>
49 #include <netgraph/netgraph.h>
50 #include <netgraph/bluetooth/include/ng_bluetooth.h>
51 #include <netgraph/bluetooth/include/ng_hci.h>
52 #include <netgraph/bluetooth/include/ng_l2cap.h>
53 #include <netgraph/bluetooth/include/ng_btsocket.h>
54 #include <netgraph/bluetooth/include/ng_btsocket_hci_raw.h>
55 #include <netgraph/bluetooth/include/ng_btsocket_l2cap.h>
56 #include <netgraph/bluetooth/include/ng_btsocket_rfcomm.h>
57 
58 static int			ng_btsocket_modevent (module_t, int, void *);
59 extern struct domain		ng_btsocket_domain;
60 
61 /*
62  * Bluetooth raw HCI sockets
63  */
64 
65 static struct pr_usrreqs	ng_btsocket_hci_raw_usrreqs = {
66 	.pru_abort =		ng_btsocket_hci_raw_abort,
67 	.pru_attach =		ng_btsocket_hci_raw_attach,
68 	.pru_bind =		ng_btsocket_hci_raw_bind,
69 	.pru_connect =		ng_btsocket_hci_raw_connect,
70 	.pru_control =		ng_btsocket_hci_raw_control,
71 	.pru_detach =		ng_btsocket_hci_raw_detach,
72 	.pru_disconnect =	ng_btsocket_hci_raw_disconnect,
73 	.pru_peeraddr =		ng_btsocket_hci_raw_peeraddr,
74 	.pru_send =		ng_btsocket_hci_raw_send,
75 	.pru_shutdown =		NULL,
76 	.pru_sockaddr =		ng_btsocket_hci_raw_sockaddr,
77 	.pru_close =		ng_btsocket_hci_raw_close,
78 };
79 
80 /*
81  * Bluetooth raw L2CAP sockets
82  */
83 
84 static struct pr_usrreqs	ng_btsocket_l2cap_raw_usrreqs = {
85 	.pru_abort =		ng_btsocket_l2cap_raw_abort,
86 	.pru_attach =		ng_btsocket_l2cap_raw_attach,
87 	.pru_bind =		ng_btsocket_l2cap_raw_bind,
88 	.pru_connect =		ng_btsocket_l2cap_raw_connect,
89 	.pru_control =		ng_btsocket_l2cap_raw_control,
90 	.pru_detach =		ng_btsocket_l2cap_raw_detach,
91 	.pru_disconnect =	ng_btsocket_l2cap_raw_disconnect,
92 	.pru_peeraddr =		ng_btsocket_l2cap_raw_peeraddr,
93 	.pru_send =		ng_btsocket_l2cap_raw_send,
94 	.pru_shutdown =		NULL,
95 	.pru_sockaddr =		ng_btsocket_l2cap_raw_sockaddr,
96 	.pru_close =		ng_btsocket_l2cap_raw_close,
97 };
98 
99 /*
100  * Bluetooth SEQPACKET L2CAP sockets
101  */
102 
103 static struct pr_usrreqs	ng_btsocket_l2cap_usrreqs = {
104 	.pru_abort =		ng_btsocket_l2cap_abort,
105 	.pru_accept =		ng_btsocket_l2cap_accept,
106 	.pru_attach =		ng_btsocket_l2cap_attach,
107 	.pru_bind =		ng_btsocket_l2cap_bind,
108 	.pru_connect =		ng_btsocket_l2cap_connect,
109 	.pru_control =		ng_btsocket_l2cap_control,
110 	.pru_detach =		ng_btsocket_l2cap_detach,
111 	.pru_disconnect =	ng_btsocket_l2cap_disconnect,
112         .pru_listen =		ng_btsocket_l2cap_listen,
113 	.pru_peeraddr =		ng_btsocket_l2cap_peeraddr,
114 	.pru_send =		ng_btsocket_l2cap_send,
115 	.pru_shutdown =		NULL,
116 	.pru_sockaddr =		ng_btsocket_l2cap_sockaddr,
117 	.pru_close =		ng_btsocket_l2cap_close,
118 };
119 
120 /*
121  * Bluetooth STREAM RFCOMM sockets
122  */
123 
124 static struct pr_usrreqs	ng_btsocket_rfcomm_usrreqs = {
125 	.pru_abort =		ng_btsocket_rfcomm_abort,
126 	.pru_accept =		ng_btsocket_rfcomm_accept,
127 	.pru_attach =		ng_btsocket_rfcomm_attach,
128 	.pru_bind =		ng_btsocket_rfcomm_bind,
129 	.pru_connect =		ng_btsocket_rfcomm_connect,
130 	.pru_control =		ng_btsocket_rfcomm_control,
131 	.pru_detach =		ng_btsocket_rfcomm_detach,
132 	.pru_disconnect =	ng_btsocket_rfcomm_disconnect,
133         .pru_listen =		ng_btsocket_rfcomm_listen,
134 	.pru_peeraddr =		ng_btsocket_rfcomm_peeraddr,
135 	.pru_send =		ng_btsocket_rfcomm_send,
136 	.pru_shutdown =		NULL,
137 	.pru_sockaddr =		ng_btsocket_rfcomm_sockaddr,
138 	.pru_close =		ng_btsocket_rfcomm_close,
139 };
140 
141 /*
142  * Definitions of protocols supported in the BLUETOOTH domain
143  */
144 
145 static struct protosw		ng_btsocket_protosw[] = {
146 {
147 	.pr_type =		SOCK_RAW,
148 	.pr_domain =		&ng_btsocket_domain,
149 	.pr_protocol =		BLUETOOTH_PROTO_HCI,
150 	.pr_flags =		PR_ATOMIC|PR_ADDR,
151 	.pr_ctloutput =		ng_btsocket_hci_raw_ctloutput,
152 	.pr_init =		ng_btsocket_hci_raw_init,
153 	.pr_usrreqs =		&ng_btsocket_hci_raw_usrreqs,
154 },
155 {
156 	.pr_type =		SOCK_RAW,
157 	.pr_domain =		&ng_btsocket_domain,
158 	.pr_protocol =		BLUETOOTH_PROTO_L2CAP,
159 	.pr_flags =		PR_ATOMIC|PR_ADDR,
160 	.pr_init =		ng_btsocket_l2cap_raw_init,
161 	.pr_usrreqs =		&ng_btsocket_l2cap_raw_usrreqs,
162 },
163 {
164 	.pr_type =		SOCK_SEQPACKET,
165 	.pr_domain =		&ng_btsocket_domain,
166 	.pr_protocol =		BLUETOOTH_PROTO_L2CAP,
167 	.pr_flags =		PR_ATOMIC|PR_CONNREQUIRED,
168 	.pr_ctloutput =		ng_btsocket_l2cap_ctloutput,
169 	.pr_init =		ng_btsocket_l2cap_init,
170 	.pr_usrreqs =		&ng_btsocket_l2cap_usrreqs,
171 },
172 {
173 	.pr_type =		SOCK_STREAM,
174 	.pr_domain =		&ng_btsocket_domain,
175 	.pr_protocol =		BLUETOOTH_PROTO_RFCOMM,
176 	.pr_flags =		PR_CONNREQUIRED,
177 	.pr_ctloutput =		ng_btsocket_rfcomm_ctloutput,
178 	.pr_init =		ng_btsocket_rfcomm_init,
179 	.pr_usrreqs =		&ng_btsocket_rfcomm_usrreqs,
180 }
181 };
182 #define ng_btsocket_protosw_size \
183 	(sizeof(ng_btsocket_protosw)/sizeof(ng_btsocket_protosw[0]))
184 #define ng_btsocket_protosw_end \
185 	&ng_btsocket_protosw[ng_btsocket_protosw_size]
186 
187 /*
188  * BLUETOOTH domain
189  */
190 
191 struct domain			ng_btsocket_domain = {
192 	.dom_family =		AF_BLUETOOTH,
193 	.dom_name =		"bluetooth",
194 	.dom_protosw =		ng_btsocket_protosw,
195 	.dom_protoswNPROTOSW =	ng_btsocket_protosw_end
196 };
197 
198 /*
199  * Socket sysctl tree
200  */
201 
202 SYSCTL_NODE(_net_bluetooth_hci, OID_AUTO, sockets, CTLFLAG_RW,
203 	0, "Bluetooth HCI sockets family");
204 SYSCTL_NODE(_net_bluetooth_l2cap, OID_AUTO, sockets, CTLFLAG_RW,
205 	0, "Bluetooth L2CAP sockets family");
206 SYSCTL_NODE(_net_bluetooth_rfcomm, OID_AUTO, sockets, CTLFLAG_RW,
207 	0, "Bluetooth RFCOMM sockets family");
208 
209 /*
210  * Module
211  */
212 
213 static moduledata_t	ng_btsocket_mod = {
214 	"ng_btsocket",
215 	ng_btsocket_modevent,
216 	NULL
217 };
218 
219 DECLARE_MODULE(ng_btsocket, ng_btsocket_mod, SI_SUB_PROTO_DOMAIN,
220 	SI_ORDER_ANY);
221 MODULE_VERSION(ng_btsocket, NG_BLUETOOTH_VERSION);
222 MODULE_DEPEND(ng_btsocket, ng_bluetooth, NG_BLUETOOTH_VERSION,
223 	NG_BLUETOOTH_VERSION, NG_BLUETOOTH_VERSION);
224 MODULE_DEPEND(ng_btsocket, netgraph, NG_ABI_VERSION,
225 	NG_ABI_VERSION, NG_ABI_VERSION);
226 
227 /*
228  * Handle loading and unloading for this node type.
229  * This is to handle auxiliary linkages (e.g protocol domain addition).
230  */
231 
232 static int
233 ng_btsocket_modevent(module_t mod, int event, void *data)
234 {
235 	int	error = 0;
236 
237 	switch (event) {
238 	case MOD_LOAD:
239 		net_add_domain(&ng_btsocket_domain);
240 		break;
241 
242 	case MOD_UNLOAD:
243 		/* XXX can't unload protocol domain yet */
244 		error = EBUSY;
245 		break;
246 
247 	default:
248 		error = EOPNOTSUPP;
249 		break;
250 	}
251 
252 	return (error);
253 } /* ng_btsocket_modevent */
254 
255