1 /* 2 * ubtbcmfw.c 3 */ 4 5 /*- 6 * SPDX-License-Identifier: BSD-2-Clause-FreeBSD 7 * 8 * Copyright (c) 2003-2009 Maksim Yevmenkin <m_evmenkin@yahoo.com> 9 * All rights reserved. 10 * 11 * Redistribution and use in source and binary forms, with or without 12 * modification, are permitted provided that the following conditions 13 * are met: 14 * 1. Redistributions of source code must retain the above copyright 15 * notice, this list of conditions and the following disclaimer. 16 * 2. Redistributions in binary form must reproduce the above copyright 17 * notice, this list of conditions and the following disclaimer in the 18 * documentation and/or other materials provided with the distribution. 19 * 20 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND 21 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE 22 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE 23 * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE 24 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL 25 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS 26 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) 27 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT 28 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY 29 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF 30 * SUCH DAMAGE. 31 * 32 * $Id: ubtbcmfw.c,v 1.3 2003/10/10 19:15:08 max Exp $ 33 * $FreeBSD$ 34 */ 35 36 #include <sys/stdint.h> 37 #include <sys/stddef.h> 38 #include <sys/param.h> 39 #include <sys/queue.h> 40 #include <sys/types.h> 41 #include <sys/systm.h> 42 #include <sys/kernel.h> 43 #include <sys/bus.h> 44 #include <sys/module.h> 45 #include <sys/lock.h> 46 #include <sys/mutex.h> 47 #include <sys/condvar.h> 48 #include <sys/sysctl.h> 49 #include <sys/sx.h> 50 #include <sys/unistd.h> 51 #include <sys/callout.h> 52 #include <sys/malloc.h> 53 #include <sys/priv.h> 54 #include <sys/conf.h> 55 #include <sys/fcntl.h> 56 57 #include "usbdevs.h" 58 #include <dev/usb/usb.h> 59 #include <dev/usb/usbdi.h> 60 #include <dev/usb/usb_ioctl.h> 61 62 #define USB_DEBUG_VAR usb_debug 63 #include <dev/usb/usb_debug.h> 64 #include <dev/usb/usb_dev.h> 65 66 /* 67 * Download firmware to BCM2033. 68 */ 69 70 #define UBTBCMFW_CONFIG_NO 1 /* Config number */ 71 #define UBTBCMFW_IFACE_IDX 0 /* Control interface */ 72 73 #define UBTBCMFW_BSIZE 1024 74 #define UBTBCMFW_IFQ_MAXLEN 2 75 76 enum { 77 UBTBCMFW_BULK_DT_WR = 0, 78 UBTBCMFW_INTR_DT_RD, 79 UBTBCMFW_N_TRANSFER, 80 }; 81 82 struct ubtbcmfw_softc { 83 struct usb_device *sc_udev; 84 struct mtx sc_mtx; 85 struct usb_xfer *sc_xfer[UBTBCMFW_N_TRANSFER]; 86 struct usb_fifo_sc sc_fifo; 87 }; 88 89 /* 90 * Prototypes 91 */ 92 93 static device_probe_t ubtbcmfw_probe; 94 static device_attach_t ubtbcmfw_attach; 95 static device_detach_t ubtbcmfw_detach; 96 97 static usb_callback_t ubtbcmfw_write_callback; 98 static usb_callback_t ubtbcmfw_read_callback; 99 100 static usb_fifo_close_t ubtbcmfw_close; 101 static usb_fifo_cmd_t ubtbcmfw_start_read; 102 static usb_fifo_cmd_t ubtbcmfw_start_write; 103 static usb_fifo_cmd_t ubtbcmfw_stop_read; 104 static usb_fifo_cmd_t ubtbcmfw_stop_write; 105 static usb_fifo_ioctl_t ubtbcmfw_ioctl; 106 static usb_fifo_open_t ubtbcmfw_open; 107 108 static struct usb_fifo_methods ubtbcmfw_fifo_methods = 109 { 110 .f_close = &ubtbcmfw_close, 111 .f_ioctl = &ubtbcmfw_ioctl, 112 .f_open = &ubtbcmfw_open, 113 .f_start_read = &ubtbcmfw_start_read, 114 .f_start_write = &ubtbcmfw_start_write, 115 .f_stop_read = &ubtbcmfw_stop_read, 116 .f_stop_write = &ubtbcmfw_stop_write, 117 .basename[0] = "ubtbcmfw", 118 .basename[1] = "ubtbcmfw", 119 .basename[2] = "ubtbcmfw", 120 .postfix[0] = "", 121 .postfix[1] = ".1", 122 .postfix[2] = ".2", 123 }; 124 125 /* 126 * Device's config structure 127 */ 128 129 static const struct usb_config ubtbcmfw_config[UBTBCMFW_N_TRANSFER] = 130 { 131 [UBTBCMFW_BULK_DT_WR] = { 132 .type = UE_BULK, 133 .endpoint = 0x02, /* fixed */ 134 .direction = UE_DIR_OUT, 135 .if_index = UBTBCMFW_IFACE_IDX, 136 .bufsize = UBTBCMFW_BSIZE, 137 .flags = { .pipe_bof = 1, .force_short_xfer = 1, 138 .proxy_buffer = 1, }, 139 .callback = &ubtbcmfw_write_callback, 140 }, 141 142 [UBTBCMFW_INTR_DT_RD] = { 143 .type = UE_INTERRUPT, 144 .endpoint = 0x01, /* fixed */ 145 .direction = UE_DIR_IN, 146 .if_index = UBTBCMFW_IFACE_IDX, 147 .bufsize = UBTBCMFW_BSIZE, 148 .flags = { .pipe_bof = 1, .short_xfer_ok = 1, 149 .proxy_buffer = 1, }, 150 .callback = &ubtbcmfw_read_callback, 151 }, 152 }; 153 154 /* 155 * Module 156 */ 157 158 static devclass_t ubtbcmfw_devclass; 159 160 static device_method_t ubtbcmfw_methods[] = 161 { 162 DEVMETHOD(device_probe, ubtbcmfw_probe), 163 DEVMETHOD(device_attach, ubtbcmfw_attach), 164 DEVMETHOD(device_detach, ubtbcmfw_detach), 165 {0, 0} 166 }; 167 168 static driver_t ubtbcmfw_driver = 169 { 170 .name = "ubtbcmfw", 171 .methods = ubtbcmfw_methods, 172 .size = sizeof(struct ubtbcmfw_softc), 173 }; 174 175 static const STRUCT_USB_HOST_ID ubtbcmfw_devs[] = { 176 /* Broadcom BCM2033 devices only */ 177 { USB_VPI(USB_VENDOR_BROADCOM, USB_PRODUCT_BROADCOM_BCM2033, 0) }, 178 }; 179 180 DRIVER_MODULE(ubtbcmfw, uhub, ubtbcmfw_driver, ubtbcmfw_devclass, NULL, 0); 181 MODULE_DEPEND(ubtbcmfw, usb, 1, 1, 1); 182 USB_PNP_HOST_INFO(ubtbcmfw_devs); 183 184 /* 185 * Probe for a USB Bluetooth device 186 */ 187 188 static int 189 ubtbcmfw_probe(device_t dev) 190 { 191 struct usb_attach_arg *uaa = device_get_ivars(dev); 192 193 if (uaa->usb_mode != USB_MODE_HOST) 194 return (ENXIO); 195 196 if (uaa->info.bIfaceIndex != 0) 197 return (ENXIO); 198 199 return (usbd_lookup_id_by_uaa(ubtbcmfw_devs, sizeof(ubtbcmfw_devs), uaa)); 200 } /* ubtbcmfw_probe */ 201 202 /* 203 * Attach the device 204 */ 205 206 static int 207 ubtbcmfw_attach(device_t dev) 208 { 209 struct usb_attach_arg *uaa = device_get_ivars(dev); 210 struct ubtbcmfw_softc *sc = device_get_softc(dev); 211 uint8_t iface_index; 212 int error; 213 214 sc->sc_udev = uaa->device; 215 216 device_set_usb_desc(dev); 217 218 mtx_init(&sc->sc_mtx, "ubtbcmfw lock", NULL, MTX_DEF | MTX_RECURSE); 219 220 iface_index = UBTBCMFW_IFACE_IDX; 221 error = usbd_transfer_setup(uaa->device, &iface_index, sc->sc_xfer, 222 ubtbcmfw_config, UBTBCMFW_N_TRANSFER, 223 sc, &sc->sc_mtx); 224 if (error != 0) { 225 device_printf(dev, "allocating USB transfers failed. %s\n", 226 usbd_errstr(error)); 227 goto detach; 228 } 229 230 error = usb_fifo_attach(uaa->device, sc, &sc->sc_mtx, 231 &ubtbcmfw_fifo_methods, &sc->sc_fifo, 232 device_get_unit(dev), 0 - 1, uaa->info.bIfaceIndex, 233 UID_ROOT, GID_OPERATOR, 0644); 234 if (error != 0) { 235 device_printf(dev, "could not attach fifo. %s\n", 236 usbd_errstr(error)); 237 goto detach; 238 } 239 240 return (0); /* success */ 241 242 detach: 243 ubtbcmfw_detach(dev); 244 245 return (ENXIO); /* failure */ 246 } /* ubtbcmfw_attach */ 247 248 /* 249 * Detach the device 250 */ 251 252 static int 253 ubtbcmfw_detach(device_t dev) 254 { 255 struct ubtbcmfw_softc *sc = device_get_softc(dev); 256 257 usb_fifo_detach(&sc->sc_fifo); 258 259 usbd_transfer_unsetup(sc->sc_xfer, UBTBCMFW_N_TRANSFER); 260 261 mtx_destroy(&sc->sc_mtx); 262 263 return (0); 264 } /* ubtbcmfw_detach */ 265 266 /* 267 * USB write callback 268 */ 269 270 static void 271 ubtbcmfw_write_callback(struct usb_xfer *xfer, usb_error_t error) 272 { 273 struct ubtbcmfw_softc *sc = usbd_xfer_softc(xfer); 274 struct usb_fifo *f = sc->sc_fifo.fp[USB_FIFO_TX]; 275 struct usb_page_cache *pc; 276 uint32_t actlen; 277 278 switch (USB_GET_STATE(xfer)) { 279 case USB_ST_SETUP: 280 case USB_ST_TRANSFERRED: 281 setup_next: 282 pc = usbd_xfer_get_frame(xfer, 0); 283 if (usb_fifo_get_data(f, pc, 0, usbd_xfer_max_len(xfer), 284 &actlen, 0)) { 285 usbd_xfer_set_frame_len(xfer, 0, actlen); 286 usbd_transfer_submit(xfer); 287 } 288 break; 289 290 default: /* Error */ 291 if (error != USB_ERR_CANCELLED) { 292 /* try to clear stall first */ 293 usbd_xfer_set_stall(xfer); 294 goto setup_next; 295 } 296 break; 297 } 298 } /* ubtbcmfw_write_callback */ 299 300 /* 301 * USB read callback 302 */ 303 304 static void 305 ubtbcmfw_read_callback(struct usb_xfer *xfer, usb_error_t error) 306 { 307 struct ubtbcmfw_softc *sc = usbd_xfer_softc(xfer); 308 struct usb_fifo *fifo = sc->sc_fifo.fp[USB_FIFO_RX]; 309 struct usb_page_cache *pc; 310 int actlen; 311 312 usbd_xfer_status(xfer, &actlen, NULL, NULL, NULL); 313 314 switch (USB_GET_STATE(xfer)) { 315 case USB_ST_TRANSFERRED: 316 pc = usbd_xfer_get_frame(xfer, 0); 317 usb_fifo_put_data(fifo, pc, 0, actlen, 1); 318 /* FALLTHROUGH */ 319 320 case USB_ST_SETUP: 321 setup_next: 322 if (usb_fifo_put_bytes_max(fifo) > 0) { 323 usbd_xfer_set_frame_len(xfer, 0, usbd_xfer_max_len(xfer)); 324 usbd_transfer_submit(xfer); 325 } 326 break; 327 328 default: /* Error */ 329 if (error != USB_ERR_CANCELLED) { 330 /* try to clear stall first */ 331 usbd_xfer_set_stall(xfer); 332 goto setup_next; 333 } 334 break; 335 } 336 } /* ubtbcmfw_read_callback */ 337 338 /* 339 * Called when we about to start read()ing from the device 340 */ 341 342 static void 343 ubtbcmfw_start_read(struct usb_fifo *fifo) 344 { 345 struct ubtbcmfw_softc *sc = usb_fifo_softc(fifo); 346 347 usbd_transfer_start(sc->sc_xfer[UBTBCMFW_INTR_DT_RD]); 348 } /* ubtbcmfw_start_read */ 349 350 /* 351 * Called when we about to stop reading (i.e. closing fifo) 352 */ 353 354 static void 355 ubtbcmfw_stop_read(struct usb_fifo *fifo) 356 { 357 struct ubtbcmfw_softc *sc = usb_fifo_softc(fifo); 358 359 usbd_transfer_stop(sc->sc_xfer[UBTBCMFW_INTR_DT_RD]); 360 } /* ubtbcmfw_stop_read */ 361 362 /* 363 * Called when we about to start write()ing to the device, poll()ing 364 * for write or flushing fifo 365 */ 366 367 static void 368 ubtbcmfw_start_write(struct usb_fifo *fifo) 369 { 370 struct ubtbcmfw_softc *sc = usb_fifo_softc(fifo); 371 372 usbd_transfer_start(sc->sc_xfer[UBTBCMFW_BULK_DT_WR]); 373 } /* ubtbcmfw_start_write */ 374 375 /* 376 * Called when we about to stop writing (i.e. closing fifo) 377 */ 378 379 static void 380 ubtbcmfw_stop_write(struct usb_fifo *fifo) 381 { 382 struct ubtbcmfw_softc *sc = usb_fifo_softc(fifo); 383 384 usbd_transfer_stop(sc->sc_xfer[UBTBCMFW_BULK_DT_WR]); 385 } /* ubtbcmfw_stop_write */ 386 387 /* 388 * Called when fifo is open 389 */ 390 391 static int 392 ubtbcmfw_open(struct usb_fifo *fifo, int fflags) 393 { 394 struct ubtbcmfw_softc *sc = usb_fifo_softc(fifo); 395 struct usb_xfer *xfer; 396 397 /* 398 * f_open fifo method can only be called with either FREAD 399 * or FWRITE flag set at one time. 400 */ 401 402 if (fflags & FREAD) 403 xfer = sc->sc_xfer[UBTBCMFW_INTR_DT_RD]; 404 else if (fflags & FWRITE) 405 xfer = sc->sc_xfer[UBTBCMFW_BULK_DT_WR]; 406 else 407 return (EINVAL); /* should not happen */ 408 409 if (usb_fifo_alloc_buffer(fifo, usbd_xfer_max_len(xfer), 410 UBTBCMFW_IFQ_MAXLEN) != 0) 411 return (ENOMEM); 412 413 return (0); 414 } /* ubtbcmfw_open */ 415 416 /* 417 * Called when fifo is closed 418 */ 419 420 static void 421 ubtbcmfw_close(struct usb_fifo *fifo, int fflags) 422 { 423 if (fflags & (FREAD | FWRITE)) 424 usb_fifo_free_buffer(fifo); 425 } /* ubtbcmfw_close */ 426 427 /* 428 * Process ioctl() on USB device 429 */ 430 431 static int 432 ubtbcmfw_ioctl(struct usb_fifo *fifo, u_long cmd, void *data, 433 int fflags) 434 { 435 struct ubtbcmfw_softc *sc = usb_fifo_softc(fifo); 436 int error = 0; 437 438 switch (cmd) { 439 case USB_GET_DEVICE_DESC: 440 memcpy(data, usbd_get_device_descriptor(sc->sc_udev), 441 sizeof(struct usb_device_descriptor)); 442 break; 443 444 default: 445 error = EINVAL; 446 break; 447 } 448 449 return (error); 450 } /* ubtbcmfw_ioctl */ 451