1 /*- 2 * Copyright (c) 2017 Adrian Chadd <adrian@FreeBSD.org> 3 * All rights reserved. 4 * 5 * Redistribution and use in source and binary forms, with or without 6 * modification, are permitted provided that the following conditions 7 * are met: 8 * 1. Redistributions of source code must retain the above copyright 9 * notice, this list of conditions and the following disclaimer. 10 * 2. Redistributions in binary form must reproduce the above copyright 11 * notice, this list of conditions and the following disclaimer in the 12 * documentation and/or other materials provided with the distribution. 13 * 14 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR 15 * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES 16 * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. 17 * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, 18 * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT 19 * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, 20 * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY 21 * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT 22 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF 23 * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. 24 */ 25 26 /* 27 * IEEE 802.11ac-2013 protocol support. 28 */ 29 30 #include "opt_inet.h" 31 #include "opt_wlan.h" 32 33 #include <sys/param.h> 34 #include <sys/kernel.h> 35 #include <sys/malloc.h> 36 #include <sys/systm.h> 37 #include <sys/endian.h> 38 39 #include <sys/socket.h> 40 41 #include <net/if.h> 42 #include <net/if_var.h> 43 #include <net/if_media.h> 44 #include <net/ethernet.h> 45 46 #include <net80211/ieee80211_var.h> 47 #include <net80211/ieee80211_action.h> 48 #include <net80211/ieee80211_input.h> 49 #include <net80211/ieee80211_vht.h> 50 51 #define ADDSHORT(frm, v) do { \ 52 frm[0] = (v) & 0xff; \ 53 frm[1] = (v) >> 8; \ 54 frm += 2; \ 55 } while (0) 56 #define ADDWORD(frm, v) do { \ 57 frm[0] = (v) & 0xff; \ 58 frm[1] = ((v) >> 8) & 0xff; \ 59 frm[2] = ((v) >> 16) & 0xff; \ 60 frm[3] = ((v) >> 24) & 0xff; \ 61 frm += 4; \ 62 } while (0) 63 64 /* 65 * Immediate TODO: 66 * 67 * + handle WLAN_ACTION_VHT_OPMODE_NOTIF and other VHT action frames 68 * + ensure vhtinfo/vhtcap parameters correctly use the negotiated 69 * capabilities and ratesets 70 * + group ID management operation 71 */ 72 73 /* 74 * XXX TODO: handle WLAN_ACTION_VHT_OPMODE_NOTIF 75 * 76 * Look at mac80211/vht.c:ieee80211_vht_handle_opmode() for further details. 77 */ 78 79 static int 80 vht_recv_action_placeholder(struct ieee80211_node *ni, 81 const struct ieee80211_frame *wh, 82 const uint8_t *frm, const uint8_t *efrm) 83 { 84 85 #ifdef IEEE80211_DEBUG 86 ieee80211_note(ni->ni_vap, "%s: called; fc=0x%.2x/0x%.2x", 87 __func__, wh->i_fc[0], wh->i_fc[1]); 88 #endif 89 return (0); 90 } 91 92 static int 93 vht_send_action_placeholder(struct ieee80211_node *ni, 94 int category, int action, void *arg0) 95 { 96 97 #ifdef IEEE80211_DEBUG 98 ieee80211_note(ni->ni_vap, "%s: called; category=%d, action=%d", 99 __func__, category, action); 100 #endif 101 return (EINVAL); 102 } 103 104 static void 105 ieee80211_vht_init(void) 106 { 107 108 ieee80211_recv_action_register(IEEE80211_ACTION_CAT_VHT, 109 WLAN_ACTION_VHT_COMPRESSED_BF, vht_recv_action_placeholder); 110 ieee80211_recv_action_register(IEEE80211_ACTION_CAT_VHT, 111 WLAN_ACTION_VHT_GROUPID_MGMT, vht_recv_action_placeholder); 112 ieee80211_recv_action_register(IEEE80211_ACTION_CAT_VHT, 113 WLAN_ACTION_VHT_OPMODE_NOTIF, vht_recv_action_placeholder); 114 115 ieee80211_send_action_register(IEEE80211_ACTION_CAT_VHT, 116 WLAN_ACTION_VHT_COMPRESSED_BF, vht_send_action_placeholder); 117 ieee80211_send_action_register(IEEE80211_ACTION_CAT_VHT, 118 WLAN_ACTION_VHT_GROUPID_MGMT, vht_send_action_placeholder); 119 ieee80211_send_action_register(IEEE80211_ACTION_CAT_VHT, 120 WLAN_ACTION_VHT_OPMODE_NOTIF, vht_send_action_placeholder); 121 } 122 123 SYSINIT(wlan_vht, SI_SUB_DRIVERS, SI_ORDER_FIRST, ieee80211_vht_init, NULL); 124 125 void 126 ieee80211_vht_attach(struct ieee80211com *ic) 127 { 128 } 129 130 void 131 ieee80211_vht_detach(struct ieee80211com *ic) 132 { 133 } 134 135 void 136 ieee80211_vht_vattach(struct ieee80211vap *vap) 137 { 138 struct ieee80211com *ic = vap->iv_ic; 139 140 if (! IEEE80211_CONF_VHT(ic)) 141 return; 142 143 vap->iv_vht_cap.vht_cap_info = ic->ic_vht_cap.vht_cap_info; 144 vap->iv_vhtextcaps = ic->ic_vhtextcaps; 145 146 /* XXX assume VHT80 support; should really check vhtcaps */ 147 vap->iv_vht_flags = 148 IEEE80211_FVHT_VHT 149 | IEEE80211_FVHT_USEVHT40 150 | IEEE80211_FVHT_USEVHT80; 151 if (IEEE80211_VHTCAP_SUPP_CHAN_WIDTH_IS_160MHZ(vap->iv_vht_cap.vht_cap_info)) 152 vap->iv_vht_flags |= IEEE80211_FVHT_USEVHT160; 153 if (IEEE80211_VHTCAP_SUPP_CHAN_WIDTH_IS_160_80P80MHZ(vap->iv_vht_cap.vht_cap_info)) 154 vap->iv_vht_flags |= IEEE80211_FVHT_USEVHT80P80; 155 156 memcpy(&vap->iv_vht_cap.supp_mcs, &ic->ic_vht_cap.supp_mcs, 157 sizeof(struct ieee80211_vht_mcs_info)); 158 } 159 160 void 161 ieee80211_vht_vdetach(struct ieee80211vap *vap) 162 { 163 } 164 165 #if 0 166 static void 167 vht_announce(struct ieee80211com *ic, enum ieee80211_phymode mode) 168 { 169 } 170 #endif 171 172 static int 173 vht_mcs_to_num(int m) 174 { 175 176 switch (m) { 177 case IEEE80211_VHT_MCS_SUPPORT_0_7: 178 return (7); 179 case IEEE80211_VHT_MCS_SUPPORT_0_8: 180 return (8); 181 case IEEE80211_VHT_MCS_SUPPORT_0_9: 182 return (9); 183 default: 184 return (0); 185 } 186 } 187 188 void 189 ieee80211_vht_announce(struct ieee80211com *ic) 190 { 191 int i, tx, rx; 192 193 if (! IEEE80211_CONF_VHT(ic)) 194 return; 195 196 /* Channel width */ 197 ic_printf(ic, "[VHT] Channel Widths: 20MHz, 40MHz, 80MHz%s%s\n", 198 (IEEE80211_VHTCAP_SUPP_CHAN_WIDTH_IS_160MHZ(ic->ic_vht_cap.vht_cap_info)) ? 199 ", 160MHz" : "", 200 (IEEE80211_VHTCAP_SUPP_CHAN_WIDTH_IS_160_80P80MHZ(ic->ic_vht_cap.vht_cap_info)) ? 201 ", 80+80MHz" : ""); 202 /* Features */ 203 ic_printf(ic, "[VHT] Features: %b\n", ic->ic_vht_cap.vht_cap_info, 204 IEEE80211_VHTCAP_BITS); 205 206 /* For now, just 5GHz VHT. Worry about 2GHz VHT later */ 207 for (i = 0; i < 8; i++) { 208 /* Each stream is 2 bits */ 209 tx = (ic->ic_vht_cap.supp_mcs.tx_mcs_map >> (2*i)) & 0x3; 210 rx = (ic->ic_vht_cap.supp_mcs.rx_mcs_map >> (2*i)) & 0x3; 211 if (tx == 3 && rx == 3) 212 continue; 213 ic_printf(ic, "[VHT] NSS %d: TX MCS 0..%d, RX MCS 0..%d\n", 214 i + 1, vht_mcs_to_num(tx), vht_mcs_to_num(rx)); 215 } 216 } 217 218 void 219 ieee80211_vht_node_init(struct ieee80211_node *ni) 220 { 221 222 IEEE80211_NOTE(ni->ni_vap, IEEE80211_MSG_11N, ni, 223 "%s: called", __func__); 224 ni->ni_flags |= IEEE80211_NODE_VHT; 225 } 226 227 void 228 ieee80211_vht_node_cleanup(struct ieee80211_node *ni) 229 { 230 231 IEEE80211_NOTE(ni->ni_vap, IEEE80211_MSG_11N, ni, 232 "%s: called", __func__); 233 ni->ni_flags &= ~IEEE80211_NODE_VHT; 234 ni->ni_vhtcap = 0; 235 bzero(&ni->ni_vht_mcsinfo, sizeof(struct ieee80211_vht_mcs_info)); 236 } 237 238 /* 239 * Parse an 802.11ac VHT operation IE. 240 */ 241 void 242 ieee80211_parse_vhtopmode(struct ieee80211_node *ni, const uint8_t *ie) 243 { 244 /* vht operation */ 245 ni->ni_vht_chanwidth = ie[2]; 246 ni->ni_vht_chan1 = ie[3]; 247 ni->ni_vht_chan2 = ie[4]; 248 ni->ni_vht_basicmcs = le16dec(ie + 5); 249 250 #if 0 251 printf("%s: chan1=%d, chan2=%d, chanwidth=%d, basicmcs=0x%04x\n", 252 __func__, ni->ni_vht_chan1, ni->ni_vht_chan2, ni->ni_vht_chanwidth, 253 ni->ni_vht_basicmcs); 254 #endif 255 } 256 257 /* 258 * Parse an 802.11ac VHT capability IE. 259 */ 260 void 261 ieee80211_parse_vhtcap(struct ieee80211_node *ni, const uint8_t *ie) 262 { 263 264 /* vht capability */ 265 ni->ni_vhtcap = le32dec(ie + 2); 266 267 /* suppmcs */ 268 ni->ni_vht_mcsinfo.rx_mcs_map = le16dec(ie + 6); 269 ni->ni_vht_mcsinfo.rx_highest = le16dec(ie + 8); 270 ni->ni_vht_mcsinfo.tx_mcs_map = le16dec(ie + 10); 271 ni->ni_vht_mcsinfo.tx_highest = le16dec(ie + 12); 272 } 273 274 int 275 ieee80211_vht_updateparams(struct ieee80211_node *ni, 276 const uint8_t *vhtcap_ie, 277 const uint8_t *vhtop_ie) 278 { 279 280 //printf("%s: called\n", __func__); 281 282 ieee80211_parse_vhtcap(ni, vhtcap_ie); 283 ieee80211_parse_vhtopmode(ni, vhtop_ie); 284 return (0); 285 } 286 287 void 288 ieee80211_setup_vht_rates(struct ieee80211_node *ni, 289 const uint8_t *vhtcap_ie, 290 const uint8_t *vhtop_ie) 291 { 292 293 //printf("%s: called\n", __func__); 294 /* XXX TODO */ 295 } 296 297 void 298 ieee80211_vht_timeout(struct ieee80211vap *vap) 299 { 300 } 301 302 void 303 ieee80211_vht_node_join(struct ieee80211_node *ni) 304 { 305 306 IEEE80211_NOTE(ni->ni_vap, IEEE80211_MSG_11N, ni, 307 "%s: called", __func__); 308 } 309 310 void 311 ieee80211_vht_node_leave(struct ieee80211_node *ni) 312 { 313 314 IEEE80211_NOTE(ni->ni_vap, IEEE80211_MSG_11N, ni, 315 "%s: called", __func__); 316 } 317 318 /* 319 * Calculate the VHTCAP IE for a given node. 320 * 321 * This includes calculating the capability intersection based on the 322 * current operating mode and intersection of the TX/RX MCS maps. 323 * 324 * The standard only makes it clear about MCS rate negotiation 325 * and MCS basic rates (which must be a subset of the general 326 * negotiated rates). It doesn't make it clear that the AP should 327 * figure out the minimum functional overlap with the STA and 328 * support that. 329 * 330 * Note: this is in host order, not in 802.11 endian order. 331 * 332 * TODO: ensure I re-read 9.7.11 Rate Selection for VHT STAs. 333 * 334 * TODO: investigate what we should negotiate for MU-MIMO beamforming 335 * options. 336 * 337 * opmode is '1' for "vhtcap as if I'm a STA", 0 otherwise. 338 */ 339 void 340 ieee80211_vht_get_vhtcap_ie(struct ieee80211_node *ni, 341 struct ieee80211_vht_cap *vhtcap, int opmode) 342 { 343 struct ieee80211vap *vap = ni->ni_vap; 344 // struct ieee80211com *ic = vap->iv_ic; 345 uint32_t val, val1, val2; 346 uint32_t new_vhtcap; 347 int i; 348 349 /* 350 * Capabilities - it depends on whether we are a station 351 * or not. 352 */ 353 new_vhtcap = 0; 354 355 /* 356 * Station - use our desired configuration based on 357 * local config, local device bits and the already-learnt 358 * vhtcap/vhtinfo IE in the node. 359 */ 360 361 /* Limit MPDU size to the smaller of the two */ 362 val2 = val1 = _IEEE80211_MASKSHIFT(vap->iv_vht_cap.vht_cap_info, 363 IEEE80211_VHTCAP_MAX_MPDU_MASK); 364 if (opmode == 1) { 365 val2 = _IEEE80211_MASKSHIFT(ni->ni_vhtcap, 366 IEEE80211_VHTCAP_MAX_MPDU_MASK); 367 } 368 val = MIN(val1, val2); 369 new_vhtcap |= _IEEE80211_SHIFTMASK(val, IEEE80211_VHTCAP_MAX_MPDU_MASK); 370 371 /* Limit supp channel config */ 372 val2 = val1 = _IEEE80211_MASKSHIFT(vap->iv_vht_cap.vht_cap_info, 373 IEEE80211_VHTCAP_SUPP_CHAN_WIDTH_MASK); 374 if (opmode == 1) { 375 val2 = _IEEE80211_MASKSHIFT(ni->ni_vhtcap, 376 IEEE80211_VHTCAP_SUPP_CHAN_WIDTH_MASK); 377 } 378 if ((val2 == 2) && 379 ((vap->iv_vht_flags & IEEE80211_FVHT_USEVHT80P80) == 0)) 380 val2 = 1; 381 if ((val2 == 1) && 382 ((vap->iv_vht_flags & IEEE80211_FVHT_USEVHT160) == 0)) 383 val2 = 0; 384 val = MIN(val1, val2); 385 new_vhtcap |= _IEEE80211_SHIFTMASK(val, 386 IEEE80211_VHTCAP_SUPP_CHAN_WIDTH_MASK); 387 388 /* RX LDPC */ 389 val2 = val1 = _IEEE80211_MASKSHIFT(vap->iv_vht_cap.vht_cap_info, 390 IEEE80211_VHTCAP_RXLDPC); 391 if (opmode == 1) { 392 val2 = _IEEE80211_MASKSHIFT(ni->ni_vhtcap, 393 IEEE80211_VHTCAP_RXLDPC); 394 } 395 val = MIN(val1, val2); 396 new_vhtcap |= _IEEE80211_SHIFTMASK(val, IEEE80211_VHTCAP_RXLDPC); 397 398 /* Short-GI 80 */ 399 val2 = val1 = _IEEE80211_MASKSHIFT(vap->iv_vht_cap.vht_cap_info, 400 IEEE80211_VHTCAP_SHORT_GI_80); 401 if (opmode == 1) { 402 val2 = _IEEE80211_MASKSHIFT(ni->ni_vhtcap, 403 IEEE80211_VHTCAP_SHORT_GI_80); 404 } 405 val = MIN(val1, val2); 406 new_vhtcap |= _IEEE80211_SHIFTMASK(val, IEEE80211_VHTCAP_SHORT_GI_80); 407 408 /* Short-GI 160 */ 409 val2 = val1 = _IEEE80211_MASKSHIFT(vap->iv_vht_cap.vht_cap_info, 410 IEEE80211_VHTCAP_SHORT_GI_160); 411 if (opmode == 1) { 412 val2 = _IEEE80211_MASKSHIFT(ni->ni_vhtcap, 413 IEEE80211_VHTCAP_SHORT_GI_160); 414 } 415 val = MIN(val1, val2); 416 new_vhtcap |= _IEEE80211_SHIFTMASK(val, IEEE80211_VHTCAP_SHORT_GI_160); 417 418 /* 419 * STBC is slightly more complicated. 420 * 421 * In non-STA mode, we just announce our capabilities and that 422 * is that. 423 * 424 * In STA mode, we should calculate our capabilities based on 425 * local capabilities /and/ what the remote says. So: 426 * 427 * + Only TX STBC if we support it and the remote supports RX STBC; 428 * + Only announce RX STBC if we support it and the remote supports 429 * TX STBC; 430 * + RX STBC should be the minimum of local and remote RX STBC; 431 */ 432 433 /* TX STBC */ 434 val2 = val1 = _IEEE80211_MASKSHIFT(vap->iv_vht_cap.vht_cap_info, 435 IEEE80211_VHTCAP_TXSTBC); 436 if (opmode == 1) { 437 /* STA mode - enable it only if node RXSTBC is non-zero */ 438 val2 = !! _IEEE80211_MASKSHIFT(ni->ni_vhtcap, 439 IEEE80211_VHTCAP_RXSTBC_MASK); 440 } 441 val = MIN(val1, val2); 442 if ((vap->iv_vht_flags & IEEE80211_FVHT_STBC_TX) == 0) 443 val = 0; 444 new_vhtcap |= _IEEE80211_SHIFTMASK(val, IEEE80211_VHTCAP_TXSTBC); 445 446 /* RX STBC1..4 */ 447 val2 = val1 = _IEEE80211_MASKSHIFT(vap->iv_vht_cap.vht_cap_info, 448 IEEE80211_VHTCAP_RXSTBC_MASK); 449 if (opmode == 1) { 450 /* STA mode - enable it only if node TXSTBC is non-zero */ 451 val2 = _IEEE80211_MASKSHIFT(ni->ni_vhtcap, 452 IEEE80211_VHTCAP_TXSTBC); 453 } 454 val = MIN(val1, val2); 455 if ((vap->iv_vht_flags & IEEE80211_FVHT_STBC_RX) == 0) 456 val = 0; 457 new_vhtcap |= _IEEE80211_SHIFTMASK(val, IEEE80211_VHTCAP_RXSTBC_MASK); 458 459 /* 460 * Finally - if RXSTBC is 0, then don't enable TXSTBC. 461 * Strictly speaking a device can TXSTBC and not RXSTBC, but 462 * it would be silly. 463 */ 464 if (val == 0) 465 new_vhtcap &= ~IEEE80211_VHTCAP_TXSTBC; 466 467 /* 468 * Some of these fields require other fields to exist. 469 * So before using it, the parent field needs to be checked 470 * otherwise the overridden value may be wrong. 471 * 472 * For example, if SU beamformee is set to 0, then BF STS 473 * needs to be 0. 474 */ 475 476 /* SU Beamformer capable */ 477 val2 = val1 = _IEEE80211_MASKSHIFT(vap->iv_vht_cap.vht_cap_info, 478 IEEE80211_VHTCAP_SU_BEAMFORMER_CAPABLE); 479 if (opmode == 1) { 480 val2 = _IEEE80211_MASKSHIFT(ni->ni_vhtcap, 481 IEEE80211_VHTCAP_SU_BEAMFORMER_CAPABLE); 482 } 483 val = MIN(val1, val2); 484 new_vhtcap |= _IEEE80211_SHIFTMASK(val, 485 IEEE80211_VHTCAP_SU_BEAMFORMER_CAPABLE); 486 487 /* SU Beamformee capable */ 488 val2 = val1 = _IEEE80211_MASKSHIFT(vap->iv_vht_cap.vht_cap_info, 489 IEEE80211_VHTCAP_SU_BEAMFORMEE_CAPABLE); 490 if (opmode == 1) { 491 val2 = _IEEE80211_MASKSHIFT(ni->ni_vhtcap, 492 IEEE80211_VHTCAP_SU_BEAMFORMEE_CAPABLE); 493 } 494 val = MIN(val1, val2); 495 new_vhtcap |= _IEEE80211_SHIFTMASK(val, 496 IEEE80211_VHTCAP_SU_BEAMFORMEE_CAPABLE); 497 498 /* Beamformee STS capability - only if SU beamformee capable */ 499 val2 = val1 = _IEEE80211_MASKSHIFT(vap->iv_vht_cap.vht_cap_info, 500 IEEE80211_VHTCAP_BEAMFORMEE_STS_MASK); 501 if (opmode == 1) { 502 val2 = _IEEE80211_MASKSHIFT(ni->ni_vhtcap, 503 IEEE80211_VHTCAP_BEAMFORMEE_STS_MASK); 504 } 505 val = MIN(val1, val2); 506 if ((new_vhtcap & IEEE80211_VHTCAP_SU_BEAMFORMEE_CAPABLE) == 0) 507 val = 0; 508 new_vhtcap |= _IEEE80211_SHIFTMASK(val, 509 IEEE80211_VHTCAP_BEAMFORMEE_STS_MASK); 510 511 /* Sounding dimensions - only if SU beamformer capable */ 512 val2 = val1 = _IEEE80211_MASKSHIFT(vap->iv_vht_cap.vht_cap_info, 513 IEEE80211_VHTCAP_SOUNDING_DIMENSIONS_MASK); 514 if (opmode == 1) 515 val2 = _IEEE80211_MASKSHIFT(ni->ni_vhtcap, 516 IEEE80211_VHTCAP_SOUNDING_DIMENSIONS_MASK); 517 val = MIN(val1, val2); 518 if ((new_vhtcap & IEEE80211_VHTCAP_SU_BEAMFORMER_CAPABLE) == 0) 519 val = 0; 520 new_vhtcap |= _IEEE80211_SHIFTMASK(val, 521 IEEE80211_VHTCAP_SOUNDING_DIMENSIONS_MASK); 522 523 /* 524 * MU Beamformer capable - only if SU BFF capable, MU BFF capable 525 * and STA (not AP) 526 */ 527 val2 = val1 = _IEEE80211_MASKSHIFT(vap->iv_vht_cap.vht_cap_info, 528 IEEE80211_VHTCAP_MU_BEAMFORMER_CAPABLE); 529 if (opmode == 1) 530 val2 = _IEEE80211_MASKSHIFT(ni->ni_vhtcap, 531 IEEE80211_VHTCAP_MU_BEAMFORMER_CAPABLE); 532 val = MIN(val1, val2); 533 if ((new_vhtcap & IEEE80211_VHTCAP_SU_BEAMFORMER_CAPABLE) == 0) 534 val = 0; 535 if (opmode != 1) /* Only enable for STA mode */ 536 val = 0; 537 new_vhtcap |= _IEEE80211_SHIFTMASK(val, 538 IEEE80211_VHTCAP_SU_BEAMFORMER_CAPABLE); 539 540 /* 541 * MU Beamformee capable - only if SU BFE capable, MU BFE capable 542 * and AP (not STA) 543 */ 544 val2 = val1 = _IEEE80211_MASKSHIFT(vap->iv_vht_cap.vht_cap_info, 545 IEEE80211_VHTCAP_MU_BEAMFORMEE_CAPABLE); 546 if (opmode == 1) 547 val2 = _IEEE80211_MASKSHIFT(ni->ni_vhtcap, 548 IEEE80211_VHTCAP_MU_BEAMFORMEE_CAPABLE); 549 val = MIN(val1, val2); 550 if ((new_vhtcap & IEEE80211_VHTCAP_SU_BEAMFORMEE_CAPABLE) == 0) 551 val = 0; 552 if (opmode != 0) /* Only enable for AP mode */ 553 val = 0; 554 new_vhtcap |= _IEEE80211_SHIFTMASK(val, 555 IEEE80211_VHTCAP_SU_BEAMFORMEE_CAPABLE); 556 557 /* VHT TXOP PS */ 558 val2 = val1 = _IEEE80211_MASKSHIFT(vap->iv_vht_cap.vht_cap_info, 559 IEEE80211_VHTCAP_VHT_TXOP_PS); 560 if (opmode == 1) 561 val2 = _IEEE80211_MASKSHIFT(ni->ni_vhtcap, 562 IEEE80211_VHTCAP_VHT_TXOP_PS); 563 val = MIN(val1, val2); 564 new_vhtcap |= _IEEE80211_SHIFTMASK(val, IEEE80211_VHTCAP_VHT_TXOP_PS); 565 566 /* HTC_VHT */ 567 val2 = val1 = _IEEE80211_MASKSHIFT(vap->iv_vht_cap.vht_cap_info, 568 IEEE80211_VHTCAP_HTC_VHT); 569 if (opmode == 1) 570 val2 = _IEEE80211_MASKSHIFT(ni->ni_vhtcap, 571 IEEE80211_VHTCAP_HTC_VHT); 572 val = MIN(val1, val2); 573 new_vhtcap |= _IEEE80211_SHIFTMASK(val, IEEE80211_VHTCAP_HTC_VHT); 574 575 /* A-MPDU length max */ 576 /* XXX TODO: we need a userland config knob for this */ 577 val2 = val1 = _IEEE80211_MASKSHIFT(vap->iv_vht_cap.vht_cap_info, 578 IEEE80211_VHTCAP_MAX_A_MPDU_LENGTH_EXPONENT_MASK); 579 if (opmode == 1) 580 val2 = _IEEE80211_MASKSHIFT(ni->ni_vhtcap, 581 IEEE80211_VHTCAP_MAX_A_MPDU_LENGTH_EXPONENT_MASK); 582 val = MIN(val1, val2); 583 new_vhtcap |= _IEEE80211_SHIFTMASK(val, 584 IEEE80211_VHTCAP_MAX_A_MPDU_LENGTH_EXPONENT_MASK); 585 586 /* 587 * Link adaptation is only valid if HTC-VHT capable is 1. 588 * Otherwise, always set it to 0. 589 */ 590 val2 = val1 = _IEEE80211_MASKSHIFT(vap->iv_vht_cap.vht_cap_info, 591 IEEE80211_VHTCAP_VHT_LINK_ADAPTATION_VHT_MASK); 592 if (opmode == 1) 593 val2 = _IEEE80211_MASKSHIFT(ni->ni_vhtcap, 594 IEEE80211_VHTCAP_VHT_LINK_ADAPTATION_VHT_MASK); 595 val = MIN(val1, val2); 596 if ((new_vhtcap & IEEE80211_VHTCAP_HTC_VHT) == 0) 597 val = 0; 598 new_vhtcap |= _IEEE80211_SHIFTMASK(val, 599 IEEE80211_VHTCAP_VHT_LINK_ADAPTATION_VHT_MASK); 600 601 /* 602 * The following two options are 0 if the pattern may change, 1 if it 603 * does not change. So, downgrade to the higher value. 604 */ 605 606 /* RX antenna pattern */ 607 val2 = val1 = _IEEE80211_MASKSHIFT(vap->iv_vht_cap.vht_cap_info, 608 IEEE80211_VHTCAP_RX_ANTENNA_PATTERN); 609 if (opmode == 1) 610 val2 = _IEEE80211_MASKSHIFT(ni->ni_vhtcap, 611 IEEE80211_VHTCAP_RX_ANTENNA_PATTERN); 612 val = MAX(val1, val2); 613 new_vhtcap |= _IEEE80211_SHIFTMASK(val, 614 IEEE80211_VHTCAP_RX_ANTENNA_PATTERN); 615 616 /* TX antenna pattern */ 617 val2 = val1 = _IEEE80211_MASKSHIFT(vap->iv_vht_cap.vht_cap_info, 618 IEEE80211_VHTCAP_TX_ANTENNA_PATTERN); 619 if (opmode == 1) 620 val2 = _IEEE80211_MASKSHIFT(ni->ni_vhtcap, 621 IEEE80211_VHTCAP_TX_ANTENNA_PATTERN); 622 val = MAX(val1, val2); 623 new_vhtcap |= _IEEE80211_SHIFTMASK(val, 624 IEEE80211_VHTCAP_TX_ANTENNA_PATTERN); 625 626 /* 627 * MCS set - again, we announce what we want to use 628 * based on configuration, device capabilities and 629 * already-learnt vhtcap/vhtinfo IE information. 630 */ 631 632 /* MCS set - start with whatever the device supports */ 633 vhtcap->supp_mcs.rx_mcs_map = vap->iv_vht_cap.supp_mcs.rx_mcs_map; 634 vhtcap->supp_mcs.rx_highest = 0; 635 vhtcap->supp_mcs.tx_mcs_map = vap->iv_vht_cap.supp_mcs.tx_mcs_map; 636 vhtcap->supp_mcs.tx_highest = 0; 637 638 vhtcap->vht_cap_info = new_vhtcap; 639 640 /* 641 * Now, if we're a STA, mask off whatever the AP doesn't support. 642 * Ie, we continue to state we can receive whatever we can do, 643 * but we only announce that we will transmit rates that meet 644 * the AP requirement. 645 * 646 * Note: 0 - MCS0..7; 1 - MCS0..8; 2 - MCS0..9; 3 = not supported. 647 * We can't just use MIN() because '3' means "no", so special case it. 648 */ 649 if (opmode) { 650 for (i = 0; i < 8; i++) { 651 val1 = (vhtcap->supp_mcs.tx_mcs_map >> (i*2)) & 0x3; 652 val2 = (ni->ni_vht_mcsinfo.tx_mcs_map >> (i*2)) & 0x3; 653 val = MIN(val1, val2); 654 if (val1 == 3 || val2 == 3) 655 val = 3; 656 vhtcap->supp_mcs.tx_mcs_map &= ~(0x3 << (i*2)); 657 vhtcap->supp_mcs.tx_mcs_map |= (val << (i*2)); 658 } 659 } 660 } 661 662 /* 663 * Add a VHTCAP field. 664 * 665 * If in station mode, we announce what we would like our 666 * desired configuration to be. 667 * 668 * Else, we announce our capabilities based on our current 669 * configuration. 670 */ 671 uint8_t * 672 ieee80211_add_vhtcap(uint8_t *frm, struct ieee80211_node *ni) 673 { 674 struct ieee80211_vht_cap vhtcap; 675 676 ieee80211_vht_get_vhtcap_ie(ni, &vhtcap, 1); 677 678 frm[0] = IEEE80211_ELEMID_VHT_CAP; 679 frm[1] = sizeof(vhtcap); 680 frm += 2; 681 682 /* 32-bit VHT capability */ 683 ADDWORD(frm, vhtcap.vht_cap_info); 684 685 /* suppmcs */ 686 ADDSHORT(frm, vhtcap.supp_mcs.rx_mcs_map); 687 ADDSHORT(frm, vhtcap.supp_mcs.rx_highest); 688 ADDSHORT(frm, vhtcap.supp_mcs.tx_mcs_map); 689 ADDSHORT(frm, vhtcap.supp_mcs.tx_highest); 690 691 return (frm); 692 } 693 694 /* 695 * Non-associated probe requests. Add VHT capabilities based on 696 * the current channel configuration. No BSS yet. 697 */ 698 uint8_t * 699 ieee80211_add_vhtcap_ch(uint8_t *frm, struct ieee80211vap *vap, 700 struct ieee80211_channel *c) 701 { 702 struct ieee80211_vht_cap *vhtcap; 703 704 memset(frm, 0, 2 + sizeof(*vhtcap)); 705 frm[0] = IEEE80211_ELEMID_VHT_CAP; 706 frm[1] = sizeof(*vhtcap); 707 frm += 2; 708 709 /* 32-bit VHT capability */ 710 ADDWORD(frm, vap->iv_vht_cap.vht_cap_info); 711 712 /* supp_mcs */ 713 ADDSHORT(frm, vap->iv_vht_cap.supp_mcs.rx_mcs_map); 714 ADDSHORT(frm, vap->iv_vht_cap.supp_mcs.rx_highest); 715 ADDSHORT(frm, vap->iv_vht_cap.supp_mcs.tx_mcs_map); 716 ADDSHORT(frm, vap->iv_vht_cap.supp_mcs.tx_highest); 717 718 return (frm); 719 } 720 721 static uint8_t 722 ieee80211_vht_get_chwidth_ie(struct ieee80211_channel *c) 723 { 724 725 /* 726 * XXX TODO: look at the node configuration as 727 * well? 728 */ 729 730 if (IEEE80211_IS_CHAN_VHT80P80(c)) 731 return IEEE80211_VHT_CHANWIDTH_80P80MHZ; 732 if (IEEE80211_IS_CHAN_VHT160(c)) 733 return IEEE80211_VHT_CHANWIDTH_160MHZ; 734 if (IEEE80211_IS_CHAN_VHT80(c)) 735 return IEEE80211_VHT_CHANWIDTH_80MHZ; 736 if (IEEE80211_IS_CHAN_VHT40(c)) 737 return IEEE80211_VHT_CHANWIDTH_USE_HT; 738 if (IEEE80211_IS_CHAN_VHT20(c)) 739 return IEEE80211_VHT_CHANWIDTH_USE_HT; 740 741 /* We shouldn't get here */ 742 printf("%s: called on a non-VHT channel (freq=%d, flags=0x%08x\n", 743 __func__, (int) c->ic_freq, c->ic_flags); 744 return IEEE80211_VHT_CHANWIDTH_USE_HT; 745 } 746 747 /* 748 * Note: this just uses the current channel information; 749 * it doesn't use the node info after parsing. 750 * 751 * XXX TODO: need to make the basic MCS set configurable. 752 * XXX TODO: read 802.11-2013 to determine what to set 753 * chwidth to when scanning. I have a feeling 754 * it isn't involved in scanning and we shouldn't 755 * be sending it; and I don't yet know what to set 756 * it to for IBSS or hostap where the peer may be 757 * a completely different channel width to us. 758 */ 759 uint8_t * 760 ieee80211_add_vhtinfo(uint8_t *frm, struct ieee80211_node *ni) 761 { 762 763 frm[0] = IEEE80211_ELEMID_VHT_OPMODE; 764 frm[1] = sizeof(struct ieee80211_vht_operation); 765 frm += 2; 766 767 /* 8-bit chanwidth */ 768 *frm++ = ieee80211_vht_get_chwidth_ie(ni->ni_chan); 769 770 /* 8-bit freq1 */ 771 *frm++ = ni->ni_chan->ic_vht_ch_freq1; 772 773 /* 8-bit freq2 */ 774 *frm++ = ni->ni_chan->ic_vht_ch_freq2; 775 776 /* 16-bit basic MCS set - just MCS0..7 for NSS=1 for now */ 777 ADDSHORT(frm, 0xfffc); 778 779 return (frm); 780 } 781 782 void 783 ieee80211_vht_update_cap(struct ieee80211_node *ni, const uint8_t *vhtcap_ie, 784 const uint8_t *vhtop_ie) 785 { 786 787 ieee80211_parse_vhtcap(ni, vhtcap_ie); 788 ieee80211_parse_vhtopmode(ni, vhtop_ie); 789 } 790 791 static struct ieee80211_channel * 792 findvhtchan(struct ieee80211com *ic, struct ieee80211_channel *c, int vhtflags) 793 { 794 795 return (ieee80211_find_channel(ic, c->ic_freq, 796 (c->ic_flags & ~IEEE80211_CHAN_VHT) | vhtflags)); 797 } 798 799 /* 800 * Handle channel promotion to VHT, similar to ieee80211_ht_adjust_channel(). 801 */ 802 struct ieee80211_channel * 803 ieee80211_vht_adjust_channel(struct ieee80211com *ic, 804 struct ieee80211_channel *chan, int flags) 805 { 806 struct ieee80211_channel *c; 807 808 /* First case - handle channel demotion - if VHT isn't set */ 809 if ((flags & IEEE80211_FVHT_MASK) == 0) { 810 #if 0 811 printf("%s: demoting channel %d/0x%08x\n", __func__, 812 chan->ic_ieee, chan->ic_flags); 813 #endif 814 c = ieee80211_find_channel(ic, chan->ic_freq, 815 chan->ic_flags & ~IEEE80211_CHAN_VHT); 816 if (c == NULL) 817 c = chan; 818 #if 0 819 printf("%s: .. to %d/0x%08x\n", __func__, 820 c->ic_ieee, c->ic_flags); 821 #endif 822 return (c); 823 } 824 825 /* 826 * We can upgrade to VHT - attempt to do so 827 * 828 * Note: we don't clear the HT flags, these are the hints 829 * for HT40U/HT40D when selecting VHT40 or larger channels. 830 */ 831 c = NULL; 832 if ((c == NULL) && (flags & IEEE80211_FVHT_USEVHT160)) 833 c = findvhtchan(ic, chan, IEEE80211_CHAN_VHT160); 834 835 if ((c == NULL) && (flags & IEEE80211_FVHT_USEVHT80P80)) 836 c = findvhtchan(ic, chan, IEEE80211_CHAN_VHT80P80); 837 838 if ((c == NULL) && (flags & IEEE80211_FVHT_USEVHT80)) 839 c = findvhtchan(ic, chan, IEEE80211_CHAN_VHT80); 840 841 if ((c == NULL) && (flags & IEEE80211_FVHT_USEVHT40)) 842 c = findvhtchan(ic, chan, IEEE80211_CHAN_VHT40U); 843 if ((c == NULL) && (flags & IEEE80211_FVHT_USEVHT40)) 844 c = findvhtchan(ic, chan, IEEE80211_CHAN_VHT40D); 845 /* 846 * If we get here, VHT20 is always possible because we checked 847 * for IEEE80211_FVHT_VHT above. 848 */ 849 if (c == NULL) 850 c = findvhtchan(ic, chan, IEEE80211_CHAN_VHT20); 851 852 if (c != NULL) 853 chan = c; 854 855 #if 0 856 printf("%s: selected %d/0x%08x\n", __func__, c->ic_ieee, c->ic_flags); 857 #endif 858 return (chan); 859 } 860 861 /* 862 * Calculate the VHT operation IE for a given node. 863 * 864 * This includes calculating the suitable channel width/parameters 865 * and basic MCS set. 866 * 867 * TODO: ensure I read 9.7.11 Rate Selection for VHT STAs. 868 * TODO: ensure I read 10.39.7 - BSS Basic VHT-MCS and NSS set operation. 869 */ 870 void 871 ieee80211_vht_get_vhtinfo_ie(struct ieee80211_node *ni, 872 struct ieee80211_vht_operation *vhtop, int opmode) 873 { 874 printf("%s: called; TODO!\n", __func__); 875 } 876