1 /*- 2 * Copyright (c) 2017 Adrian Chadd <adrian@FreeBSD.org> 3 * All rights reserved. 4 * 5 * Redistribution and use in source and binary forms, with or without 6 * modification, are permitted provided that the following conditions 7 * are met: 8 * 1. Redistributions of source code must retain the above copyright 9 * notice, this list of conditions and the following disclaimer. 10 * 2. Redistributions in binary form must reproduce the above copyright 11 * notice, this list of conditions and the following disclaimer in the 12 * documentation and/or other materials provided with the distribution. 13 * 14 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR 15 * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES 16 * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. 17 * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, 18 * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT 19 * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, 20 * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY 21 * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT 22 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF 23 * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. 24 */ 25 26 #include <sys/cdefs.h> 27 #ifdef __FreeBSD__ 28 __FBSDID("$FreeBSD$"); 29 #endif 30 31 /* 32 * IEEE 802.11ac-2013 protocol support. 33 */ 34 35 #include "opt_inet.h" 36 #include "opt_wlan.h" 37 38 #include <sys/param.h> 39 #include <sys/kernel.h> 40 #include <sys/malloc.h> 41 #include <sys/systm.h> 42 #include <sys/endian.h> 43 44 #include <sys/socket.h> 45 46 #include <net/if.h> 47 #include <net/if_var.h> 48 #include <net/if_media.h> 49 #include <net/ethernet.h> 50 51 #include <net80211/ieee80211_var.h> 52 #include <net80211/ieee80211_action.h> 53 #include <net80211/ieee80211_input.h> 54 #include <net80211/ieee80211_vht.h> 55 56 #define ADDSHORT(frm, v) do { \ 57 frm[0] = (v) & 0xff; \ 58 frm[1] = (v) >> 8; \ 59 frm += 2; \ 60 } while (0) 61 #define ADDWORD(frm, v) do { \ 62 frm[0] = (v) & 0xff; \ 63 frm[1] = ((v) >> 8) & 0xff; \ 64 frm[2] = ((v) >> 16) & 0xff; \ 65 frm[3] = ((v) >> 24) & 0xff; \ 66 frm += 4; \ 67 } while (0) 68 69 /* 70 * Immediate TODO: 71 * 72 * + handle WLAN_ACTION_VHT_OPMODE_NOTIF and other VHT action frames 73 * + ensure vhtinfo/vhtcap parameters correctly use the negotiated 74 * capabilities and ratesets 75 * + group ID management operation 76 */ 77 78 /* 79 * XXX TODO: handle WLAN_ACTION_VHT_OPMODE_NOTIF 80 * 81 * Look at mac80211/vht.c:ieee80211_vht_handle_opmode() for further details. 82 */ 83 84 static int 85 vht_recv_action_placeholder(struct ieee80211_node *ni, 86 const struct ieee80211_frame *wh, 87 const uint8_t *frm, const uint8_t *efrm) 88 { 89 90 #ifdef IEEE80211_DEBUG 91 ieee80211_note(ni->ni_vap, "%s: called; fc=0x%.2x/0x%.2x", 92 __func__, wh->i_fc[0], wh->i_fc[1]); 93 #endif 94 return (0); 95 } 96 97 static int 98 vht_send_action_placeholder(struct ieee80211_node *ni, 99 int category, int action, void *arg0) 100 { 101 102 #ifdef IEEE80211_DEBUG 103 ieee80211_note(ni->ni_vap, "%s: called; category=%d, action=%d", 104 __func__, category, action); 105 #endif 106 return (EINVAL); 107 } 108 109 static void 110 ieee80211_vht_init(void) 111 { 112 113 ieee80211_recv_action_register(IEEE80211_ACTION_CAT_VHT, 114 WLAN_ACTION_VHT_COMPRESSED_BF, vht_recv_action_placeholder); 115 ieee80211_recv_action_register(IEEE80211_ACTION_CAT_VHT, 116 WLAN_ACTION_VHT_GROUPID_MGMT, vht_recv_action_placeholder); 117 ieee80211_recv_action_register(IEEE80211_ACTION_CAT_VHT, 118 WLAN_ACTION_VHT_OPMODE_NOTIF, vht_recv_action_placeholder); 119 120 ieee80211_send_action_register(IEEE80211_ACTION_CAT_VHT, 121 WLAN_ACTION_VHT_COMPRESSED_BF, vht_send_action_placeholder); 122 ieee80211_send_action_register(IEEE80211_ACTION_CAT_VHT, 123 WLAN_ACTION_VHT_GROUPID_MGMT, vht_send_action_placeholder); 124 ieee80211_send_action_register(IEEE80211_ACTION_CAT_VHT, 125 WLAN_ACTION_VHT_OPMODE_NOTIF, vht_send_action_placeholder); 126 } 127 128 SYSINIT(wlan_vht, SI_SUB_DRIVERS, SI_ORDER_FIRST, ieee80211_vht_init, NULL); 129 130 void 131 ieee80211_vht_attach(struct ieee80211com *ic) 132 { 133 } 134 135 void 136 ieee80211_vht_detach(struct ieee80211com *ic) 137 { 138 } 139 140 void 141 ieee80211_vht_vattach(struct ieee80211vap *vap) 142 { 143 struct ieee80211com *ic = vap->iv_ic; 144 145 if (! IEEE80211_CONF_VHT(ic)) 146 return; 147 148 vap->iv_vhtcaps = ic->ic_vhtcaps; 149 vap->iv_vhtextcaps = ic->ic_vhtextcaps; 150 151 /* XXX assume VHT80 support; should really check vhtcaps */ 152 vap->iv_flags_vht = 153 IEEE80211_FVHT_VHT 154 | IEEE80211_FVHT_USEVHT40 155 | IEEE80211_FVHT_USEVHT80; 156 if (IEEE80211_VHTCAP_SUPP_CHAN_WIDTH_IS_160MHZ(vap->iv_vhtcaps)) 157 vap->iv_flags_vht |= IEEE80211_FVHT_USEVHT160; 158 if (IEEE80211_VHTCAP_SUPP_CHAN_WIDTH_IS_160_80P80MHZ(vap->iv_vhtcaps)) 159 vap->iv_flags_vht |= IEEE80211_FVHT_USEVHT80P80; 160 161 memcpy(&vap->iv_vht_mcsinfo, &ic->ic_vht_mcsinfo, 162 sizeof(struct ieee80211_vht_mcs_info)); 163 } 164 165 void 166 ieee80211_vht_vdetach(struct ieee80211vap *vap) 167 { 168 } 169 170 #if 0 171 static void 172 vht_announce(struct ieee80211com *ic, enum ieee80211_phymode mode) 173 { 174 } 175 #endif 176 177 static int 178 vht_mcs_to_num(int m) 179 { 180 181 switch (m) { 182 case IEEE80211_VHT_MCS_SUPPORT_0_7: 183 return (7); 184 case IEEE80211_VHT_MCS_SUPPORT_0_8: 185 return (8); 186 case IEEE80211_VHT_MCS_SUPPORT_0_9: 187 return (9); 188 default: 189 return (0); 190 } 191 } 192 193 void 194 ieee80211_vht_announce(struct ieee80211com *ic) 195 { 196 int i, tx, rx; 197 198 if (! IEEE80211_CONF_VHT(ic)) 199 return; 200 201 /* Channel width */ 202 ic_printf(ic, "[VHT] Channel Widths: 20MHz, 40MHz, 80MHz%s%s\n", 203 (IEEE80211_VHTCAP_SUPP_CHAN_WIDTH_IS_160MHZ(ic->ic_vhtcaps)) ? 204 ", 160MHz" : "", 205 (IEEE80211_VHTCAP_SUPP_CHAN_WIDTH_IS_160_80P80MHZ(ic->ic_vhtcaps)) ? 206 ", 80+80MHz" : ""); 207 /* Features */ 208 ic_printf(ic, "[VHT] Features: %b\n", ic->ic_vhtcaps, 209 IEEE80211_VHTCAP_BITS); 210 211 /* For now, just 5GHz VHT. Worry about 2GHz VHT later */ 212 for (i = 0; i < 8; i++) { 213 /* Each stream is 2 bits */ 214 tx = (ic->ic_vht_mcsinfo.tx_mcs_map >> (2*i)) & 0x3; 215 rx = (ic->ic_vht_mcsinfo.rx_mcs_map >> (2*i)) & 0x3; 216 if (tx == 3 && rx == 3) 217 continue; 218 ic_printf(ic, "[VHT] NSS %d: TX MCS 0..%d, RX MCS 0..%d\n", 219 i + 1, vht_mcs_to_num(tx), vht_mcs_to_num(rx)); 220 } 221 } 222 223 void 224 ieee80211_vht_node_init(struct ieee80211_node *ni) 225 { 226 227 IEEE80211_NOTE(ni->ni_vap, IEEE80211_MSG_11N, ni, 228 "%s: called", __func__); 229 ni->ni_flags |= IEEE80211_NODE_VHT; 230 } 231 232 void 233 ieee80211_vht_node_cleanup(struct ieee80211_node *ni) 234 { 235 236 IEEE80211_NOTE(ni->ni_vap, IEEE80211_MSG_11N, ni, 237 "%s: called", __func__); 238 ni->ni_flags &= ~IEEE80211_NODE_VHT; 239 ni->ni_vhtcap = 0; 240 bzero(&ni->ni_vht_mcsinfo, sizeof(struct ieee80211_vht_mcs_info)); 241 } 242 243 /* 244 * Parse an 802.11ac VHT operation IE. 245 */ 246 void 247 ieee80211_parse_vhtopmode(struct ieee80211_node *ni, const uint8_t *ie) 248 { 249 /* vht operation */ 250 ni->ni_vht_chanwidth = ie[2]; 251 ni->ni_vht_chan1 = ie[3]; 252 ni->ni_vht_chan2 = ie[4]; 253 ni->ni_vht_basicmcs = le16dec(ie + 5); 254 255 #if 0 256 printf("%s: chan1=%d, chan2=%d, chanwidth=%d, basicmcs=0x%04x\n", 257 __func__, ni->ni_vht_chan1, ni->ni_vht_chan2, ni->ni_vht_chanwidth, 258 ni->ni_vht_basicmcs); 259 #endif 260 } 261 262 /* 263 * Parse an 802.11ac VHT capability IE. 264 */ 265 void 266 ieee80211_parse_vhtcap(struct ieee80211_node *ni, const uint8_t *ie) 267 { 268 269 /* vht capability */ 270 ni->ni_vhtcap = le32dec(ie + 2); 271 272 /* suppmcs */ 273 ni->ni_vht_mcsinfo.rx_mcs_map = le16dec(ie + 6); 274 ni->ni_vht_mcsinfo.rx_highest = le16dec(ie + 8); 275 ni->ni_vht_mcsinfo.tx_mcs_map = le16dec(ie + 10); 276 ni->ni_vht_mcsinfo.tx_highest = le16dec(ie + 12); 277 } 278 279 int 280 ieee80211_vht_updateparams(struct ieee80211_node *ni, 281 const uint8_t *vhtcap_ie, 282 const uint8_t *vhtop_ie) 283 { 284 285 //printf("%s: called\n", __func__); 286 287 ieee80211_parse_vhtcap(ni, vhtcap_ie); 288 ieee80211_parse_vhtopmode(ni, vhtop_ie); 289 return (0); 290 } 291 292 void 293 ieee80211_setup_vht_rates(struct ieee80211_node *ni, 294 const uint8_t *vhtcap_ie, 295 const uint8_t *vhtop_ie) 296 { 297 298 //printf("%s: called\n", __func__); 299 /* XXX TODO */ 300 } 301 302 void 303 ieee80211_vht_timeout(struct ieee80211vap *vap) 304 { 305 } 306 307 void 308 ieee80211_vht_node_join(struct ieee80211_node *ni) 309 { 310 311 IEEE80211_NOTE(ni->ni_vap, IEEE80211_MSG_11N, ni, 312 "%s: called", __func__); 313 } 314 315 void 316 ieee80211_vht_node_leave(struct ieee80211_node *ni) 317 { 318 319 IEEE80211_NOTE(ni->ni_vap, IEEE80211_MSG_11N, ni, 320 "%s: called", __func__); 321 } 322 323 /* 324 * Calculate the VHTCAP IE for a given node. 325 * 326 * This includes calculating the capability intersection based on the 327 * current operating mode and intersection of the TX/RX MCS maps. 328 * 329 * The standard only makes it clear about MCS rate negotiation 330 * and MCS basic rates (which must be a subset of the general 331 * negotiated rates). It doesn't make it clear that the AP should 332 * figure out the minimum functional overlap with the STA and 333 * support that. 334 * 335 * Note: this is in host order, not in 802.11 endian order. 336 * 337 * TODO: ensure I re-read 9.7.11 Rate Selection for VHT STAs. 338 * 339 * TODO: investigate what we should negotiate for MU-MIMO beamforming 340 * options. 341 * 342 * opmode is '1' for "vhtcap as if I'm a STA", 0 otherwise. 343 */ 344 void 345 ieee80211_vht_get_vhtcap_ie(struct ieee80211_node *ni, 346 struct ieee80211_ie_vhtcap *vhtcap, int opmode) 347 { 348 struct ieee80211vap *vap = ni->ni_vap; 349 // struct ieee80211com *ic = vap->iv_ic; 350 uint32_t val, val1, val2; 351 uint32_t new_vhtcap; 352 int i; 353 354 vhtcap->ie = IEEE80211_ELEMID_VHT_CAP; 355 vhtcap->len = sizeof(struct ieee80211_ie_vhtcap) - 2; 356 357 /* 358 * Capabilities - it depends on whether we are a station 359 * or not. 360 */ 361 new_vhtcap = 0; 362 363 /* 364 * Station - use our desired configuration based on 365 * local config, local device bits and the already-learnt 366 * vhtcap/vhtinfo IE in the node. 367 */ 368 369 /* Limit MPDU size to the smaller of the two */ 370 val2 = val1 = _IEEE80211_MASKSHIFT(vap->iv_vhtcaps, 371 IEEE80211_VHTCAP_MAX_MPDU_MASK); 372 if (opmode == 1) { 373 val2 = _IEEE80211_MASKSHIFT(ni->ni_vhtcap, 374 IEEE80211_VHTCAP_MAX_MPDU_MASK); 375 } 376 val = MIN(val1, val2); 377 new_vhtcap |= _IEEE80211_SHIFTMASK(val, IEEE80211_VHTCAP_MAX_MPDU_MASK); 378 379 /* Limit supp channel config */ 380 val2 = val1 = _IEEE80211_MASKSHIFT(vap->iv_vhtcaps, 381 IEEE80211_VHTCAP_SUPP_CHAN_WIDTH_MASK); 382 if (opmode == 1) { 383 val2 = _IEEE80211_MASKSHIFT(ni->ni_vhtcap, 384 IEEE80211_VHTCAP_SUPP_CHAN_WIDTH_MASK); 385 } 386 if ((val2 == 2) && 387 ((vap->iv_flags_vht & IEEE80211_FVHT_USEVHT80P80) == 0)) 388 val2 = 1; 389 if ((val2 == 1) && 390 ((vap->iv_flags_vht & IEEE80211_FVHT_USEVHT160) == 0)) 391 val2 = 0; 392 val = MIN(val1, val2); 393 new_vhtcap |= _IEEE80211_SHIFTMASK(val, 394 IEEE80211_VHTCAP_SUPP_CHAN_WIDTH_MASK); 395 396 /* RX LDPC */ 397 val2 = val1 = _IEEE80211_MASKSHIFT(vap->iv_vhtcaps, 398 IEEE80211_VHTCAP_RXLDPC); 399 if (opmode == 1) { 400 val2 = _IEEE80211_MASKSHIFT(ni->ni_vhtcap, 401 IEEE80211_VHTCAP_RXLDPC); 402 } 403 val = MIN(val1, val2); 404 new_vhtcap |= _IEEE80211_SHIFTMASK(val, IEEE80211_VHTCAP_RXLDPC); 405 406 /* Short-GI 80 */ 407 val2 = val1 = _IEEE80211_MASKSHIFT(vap->iv_vhtcaps, 408 IEEE80211_VHTCAP_SHORT_GI_80); 409 if (opmode == 1) { 410 val2 = _IEEE80211_MASKSHIFT(ni->ni_vhtcap, 411 IEEE80211_VHTCAP_SHORT_GI_80); 412 } 413 val = MIN(val1, val2); 414 new_vhtcap |= _IEEE80211_SHIFTMASK(val, IEEE80211_VHTCAP_SHORT_GI_80); 415 416 /* Short-GI 160 */ 417 val2 = val1 = _IEEE80211_MASKSHIFT(vap->iv_vhtcaps, 418 IEEE80211_VHTCAP_SHORT_GI_160); 419 if (opmode == 1) { 420 val2 = _IEEE80211_MASKSHIFT(ni->ni_vhtcap, 421 IEEE80211_VHTCAP_SHORT_GI_160); 422 } 423 val = MIN(val1, val2); 424 new_vhtcap |= _IEEE80211_SHIFTMASK(val, IEEE80211_VHTCAP_SHORT_GI_160); 425 426 /* 427 * STBC is slightly more complicated. 428 * 429 * In non-STA mode, we just announce our capabilities and that 430 * is that. 431 * 432 * In STA mode, we should calculate our capabilities based on 433 * local capabilities /and/ what the remote says. So: 434 * 435 * + Only TX STBC if we support it and the remote supports RX STBC; 436 * + Only announce RX STBC if we support it and the remote supports 437 * TX STBC; 438 * + RX STBC should be the minimum of local and remote RX STBC; 439 */ 440 441 /* TX STBC */ 442 val2 = val1 = _IEEE80211_MASKSHIFT(vap->iv_vhtcaps, 443 IEEE80211_VHTCAP_TXSTBC); 444 if (opmode == 1) { 445 /* STA mode - enable it only if node RXSTBC is non-zero */ 446 val2 = !! _IEEE80211_MASKSHIFT(ni->ni_vhtcap, 447 IEEE80211_VHTCAP_RXSTBC_MASK); 448 } 449 val = MIN(val1, val2); 450 /* XXX For now, use the 11n config flag */ 451 if ((vap->iv_flags_ht & IEEE80211_FHT_STBC_TX) == 0) 452 val = 0; 453 new_vhtcap |= _IEEE80211_SHIFTMASK(val, IEEE80211_VHTCAP_TXSTBC); 454 455 /* RX STBC1..4 */ 456 val2 = val1 = _IEEE80211_MASKSHIFT(vap->iv_vhtcaps, 457 IEEE80211_VHTCAP_RXSTBC_MASK); 458 if (opmode == 1) { 459 /* STA mode - enable it only if node TXSTBC is non-zero */ 460 val2 = _IEEE80211_MASKSHIFT(ni->ni_vhtcap, 461 IEEE80211_VHTCAP_TXSTBC); 462 } 463 val = MIN(val1, val2); 464 /* XXX For now, use the 11n config flag */ 465 if ((vap->iv_flags_ht & IEEE80211_FHT_STBC_RX) == 0) 466 val = 0; 467 new_vhtcap |= _IEEE80211_SHIFTMASK(val, IEEE80211_VHTCAP_RXSTBC_MASK); 468 469 /* 470 * Finally - if RXSTBC is 0, then don't enable TXSTBC. 471 * Strictly speaking a device can TXSTBC and not RXSTBC, but 472 * it would be silly. 473 */ 474 if (val == 0) 475 new_vhtcap &= ~IEEE80211_VHTCAP_TXSTBC; 476 477 /* 478 * Some of these fields require other fields to exist. 479 * So before using it, the parent field needs to be checked 480 * otherwise the overridden value may be wrong. 481 * 482 * For example, if SU beamformee is set to 0, then BF STS 483 * needs to be 0. 484 */ 485 486 /* SU Beamformer capable */ 487 val2 = val1 = _IEEE80211_MASKSHIFT(vap->iv_vhtcaps, 488 IEEE80211_VHTCAP_SU_BEAMFORMER_CAPABLE); 489 if (opmode == 1) { 490 val2 = _IEEE80211_MASKSHIFT(ni->ni_vhtcap, 491 IEEE80211_VHTCAP_SU_BEAMFORMER_CAPABLE); 492 } 493 val = MIN(val1, val2); 494 new_vhtcap |= _IEEE80211_SHIFTMASK(val, 495 IEEE80211_VHTCAP_SU_BEAMFORMER_CAPABLE); 496 497 /* SU Beamformee capable */ 498 val2 = val1 = _IEEE80211_MASKSHIFT(vap->iv_vhtcaps, 499 IEEE80211_VHTCAP_SU_BEAMFORMEE_CAPABLE); 500 if (opmode == 1) { 501 val2 = _IEEE80211_MASKSHIFT(ni->ni_vhtcap, 502 IEEE80211_VHTCAP_SU_BEAMFORMEE_CAPABLE); 503 } 504 val = MIN(val1, val2); 505 new_vhtcap |= _IEEE80211_SHIFTMASK(val, 506 IEEE80211_VHTCAP_SU_BEAMFORMEE_CAPABLE); 507 508 /* Beamformee STS capability - only if SU beamformee capable */ 509 val2 = val1 = _IEEE80211_MASKSHIFT(vap->iv_vhtcaps, 510 IEEE80211_VHTCAP_BEAMFORMEE_STS_MASK); 511 if (opmode == 1) { 512 val2 = _IEEE80211_MASKSHIFT(ni->ni_vhtcap, 513 IEEE80211_VHTCAP_BEAMFORMEE_STS_MASK); 514 } 515 val = MIN(val1, val2); 516 if ((new_vhtcap & IEEE80211_VHTCAP_SU_BEAMFORMEE_CAPABLE) == 0) 517 val = 0; 518 new_vhtcap |= _IEEE80211_SHIFTMASK(val, 519 IEEE80211_VHTCAP_BEAMFORMEE_STS_MASK); 520 521 /* Sounding dimensions - only if SU beamformer capable */ 522 val2 = val1 = _IEEE80211_MASKSHIFT(vap->iv_vhtcaps, 523 IEEE80211_VHTCAP_SOUNDING_DIMENSIONS_MASK); 524 if (opmode == 1) 525 val2 = _IEEE80211_MASKSHIFT(ni->ni_vhtcap, 526 IEEE80211_VHTCAP_SOUNDING_DIMENSIONS_MASK); 527 val = MIN(val1, val2); 528 if ((new_vhtcap & IEEE80211_VHTCAP_SU_BEAMFORMER_CAPABLE) == 0) 529 val = 0; 530 new_vhtcap |= _IEEE80211_SHIFTMASK(val, 531 IEEE80211_VHTCAP_SOUNDING_DIMENSIONS_MASK); 532 533 /* 534 * MU Beamformer capable - only if SU BFF capable, MU BFF capable 535 * and STA (not AP) 536 */ 537 val2 = val1 = _IEEE80211_MASKSHIFT(vap->iv_vhtcaps, 538 IEEE80211_VHTCAP_MU_BEAMFORMER_CAPABLE); 539 if (opmode == 1) 540 val2 = _IEEE80211_MASKSHIFT(ni->ni_vhtcap, 541 IEEE80211_VHTCAP_MU_BEAMFORMER_CAPABLE); 542 val = MIN(val1, val2); 543 if ((new_vhtcap & IEEE80211_VHTCAP_SU_BEAMFORMER_CAPABLE) == 0) 544 val = 0; 545 if (opmode != 1) /* Only enable for STA mode */ 546 val = 0; 547 new_vhtcap |= _IEEE80211_SHIFTMASK(val, 548 IEEE80211_VHTCAP_SU_BEAMFORMER_CAPABLE); 549 550 /* 551 * MU Beamformee capable - only if SU BFE capable, MU BFE capable 552 * and AP (not STA) 553 */ 554 val2 = val1 = _IEEE80211_MASKSHIFT(vap->iv_vhtcaps, 555 IEEE80211_VHTCAP_MU_BEAMFORMEE_CAPABLE); 556 if (opmode == 1) 557 val2 = _IEEE80211_MASKSHIFT(ni->ni_vhtcap, 558 IEEE80211_VHTCAP_MU_BEAMFORMEE_CAPABLE); 559 val = MIN(val1, val2); 560 if ((new_vhtcap & IEEE80211_VHTCAP_SU_BEAMFORMEE_CAPABLE) == 0) 561 val = 0; 562 if (opmode != 0) /* Only enable for AP mode */ 563 val = 0; 564 new_vhtcap |= _IEEE80211_SHIFTMASK(val, 565 IEEE80211_VHTCAP_SU_BEAMFORMEE_CAPABLE); 566 567 /* VHT TXOP PS */ 568 val2 = val1 = _IEEE80211_MASKSHIFT(vap->iv_vhtcaps, 569 IEEE80211_VHTCAP_VHT_TXOP_PS); 570 if (opmode == 1) 571 val2 = _IEEE80211_MASKSHIFT(ni->ni_vhtcap, 572 IEEE80211_VHTCAP_VHT_TXOP_PS); 573 val = MIN(val1, val2); 574 new_vhtcap |= _IEEE80211_SHIFTMASK(val, IEEE80211_VHTCAP_VHT_TXOP_PS); 575 576 /* HTC_VHT */ 577 val2 = val1 = _IEEE80211_MASKSHIFT(vap->iv_vhtcaps, 578 IEEE80211_VHTCAP_HTC_VHT); 579 if (opmode == 1) 580 val2 = _IEEE80211_MASKSHIFT(ni->ni_vhtcap, 581 IEEE80211_VHTCAP_HTC_VHT); 582 val = MIN(val1, val2); 583 new_vhtcap |= _IEEE80211_SHIFTMASK(val, IEEE80211_VHTCAP_HTC_VHT); 584 585 /* A-MPDU length max */ 586 /* XXX TODO: we need a userland config knob for this */ 587 val2 = val1 = _IEEE80211_MASKSHIFT(vap->iv_vhtcaps, 588 IEEE80211_VHTCAP_MAX_A_MPDU_LENGTH_EXPONENT_MASK); 589 if (opmode == 1) 590 val2 = _IEEE80211_MASKSHIFT(ni->ni_vhtcap, 591 IEEE80211_VHTCAP_MAX_A_MPDU_LENGTH_EXPONENT_MASK); 592 val = MIN(val1, val2); 593 new_vhtcap |= _IEEE80211_SHIFTMASK(val, 594 IEEE80211_VHTCAP_MAX_A_MPDU_LENGTH_EXPONENT_MASK); 595 596 /* 597 * Link adaptation is only valid if HTC-VHT capable is 1. 598 * Otherwise, always set it to 0. 599 */ 600 val2 = val1 = _IEEE80211_MASKSHIFT(vap->iv_vhtcaps, 601 IEEE80211_VHTCAP_VHT_LINK_ADAPTATION_VHT_MASK); 602 if (opmode == 1) 603 val2 = _IEEE80211_MASKSHIFT(ni->ni_vhtcap, 604 IEEE80211_VHTCAP_VHT_LINK_ADAPTATION_VHT_MASK); 605 val = MIN(val1, val2); 606 if ((new_vhtcap & IEEE80211_VHTCAP_HTC_VHT) == 0) 607 val = 0; 608 new_vhtcap |= _IEEE80211_SHIFTMASK(val, 609 IEEE80211_VHTCAP_VHT_LINK_ADAPTATION_VHT_MASK); 610 611 /* 612 * The following two options are 0 if the pattern may change, 1 if it 613 * does not change. So, downgrade to the higher value. 614 */ 615 616 /* RX antenna pattern */ 617 val2 = val1 = _IEEE80211_MASKSHIFT(vap->iv_vhtcaps, 618 IEEE80211_VHTCAP_RX_ANTENNA_PATTERN); 619 if (opmode == 1) 620 val2 = _IEEE80211_MASKSHIFT(ni->ni_vhtcap, 621 IEEE80211_VHTCAP_RX_ANTENNA_PATTERN); 622 val = MAX(val1, val2); 623 new_vhtcap |= _IEEE80211_SHIFTMASK(val, 624 IEEE80211_VHTCAP_RX_ANTENNA_PATTERN); 625 626 /* TX antenna pattern */ 627 val2 = val1 = _IEEE80211_MASKSHIFT(vap->iv_vhtcaps, 628 IEEE80211_VHTCAP_TX_ANTENNA_PATTERN); 629 if (opmode == 1) 630 val2 = _IEEE80211_MASKSHIFT(ni->ni_vhtcap, 631 IEEE80211_VHTCAP_TX_ANTENNA_PATTERN); 632 val = MAX(val1, val2); 633 new_vhtcap |= _IEEE80211_SHIFTMASK(val, 634 IEEE80211_VHTCAP_TX_ANTENNA_PATTERN); 635 636 /* 637 * MCS set - again, we announce what we want to use 638 * based on configuration, device capabilities and 639 * already-learnt vhtcap/vhtinfo IE information. 640 */ 641 642 /* MCS set - start with whatever the device supports */ 643 vhtcap->supp_mcs.rx_mcs_map = vap->iv_vht_mcsinfo.rx_mcs_map; 644 vhtcap->supp_mcs.rx_highest = 0; 645 vhtcap->supp_mcs.tx_mcs_map = vap->iv_vht_mcsinfo.tx_mcs_map; 646 vhtcap->supp_mcs.tx_highest = 0; 647 648 vhtcap->vht_cap_info = new_vhtcap; 649 650 /* 651 * Now, if we're a STA, mask off whatever the AP doesn't support. 652 * Ie, we continue to state we can receive whatever we can do, 653 * but we only announce that we will transmit rates that meet 654 * the AP requirement. 655 * 656 * Note: 0 - MCS0..7; 1 - MCS0..8; 2 - MCS0..9; 3 = not supported. 657 * We can't just use MIN() because '3' means "no", so special case it. 658 */ 659 if (opmode) { 660 for (i = 0; i < 8; i++) { 661 val1 = (vhtcap->supp_mcs.tx_mcs_map >> (i*2)) & 0x3; 662 val2 = (ni->ni_vht_mcsinfo.tx_mcs_map >> (i*2)) & 0x3; 663 val = MIN(val1, val2); 664 if (val1 == 3 || val2 == 3) 665 val = 3; 666 vhtcap->supp_mcs.tx_mcs_map &= ~(0x3 << (i*2)); 667 vhtcap->supp_mcs.tx_mcs_map |= (val << (i*2)); 668 } 669 } 670 } 671 672 /* 673 * Add a VHTCAP field. 674 * 675 * If in station mode, we announce what we would like our 676 * desired configuration to be. 677 * 678 * Else, we announce our capabilities based on our current 679 * configuration. 680 */ 681 uint8_t * 682 ieee80211_add_vhtcap(uint8_t *frm, struct ieee80211_node *ni) 683 { 684 struct ieee80211_ie_vhtcap vhtcap; 685 int opmode; 686 687 opmode = 0; 688 if (ni->ni_vap->iv_opmode == IEEE80211_M_STA) 689 opmode = 1; 690 691 ieee80211_vht_get_vhtcap_ie(ni, &vhtcap, opmode); 692 693 memset(frm, '\0', sizeof(struct ieee80211_ie_vhtcap)); 694 695 frm[0] = IEEE80211_ELEMID_VHT_CAP; 696 frm[1] = sizeof(struct ieee80211_ie_vhtcap) - 2; 697 frm += 2; 698 699 /* 32-bit VHT capability */ 700 ADDWORD(frm, vhtcap.vht_cap_info); 701 702 /* suppmcs */ 703 ADDSHORT(frm, vhtcap.supp_mcs.rx_mcs_map); 704 ADDSHORT(frm, vhtcap.supp_mcs.rx_highest); 705 ADDSHORT(frm, vhtcap.supp_mcs.tx_mcs_map); 706 ADDSHORT(frm, vhtcap.supp_mcs.tx_highest); 707 708 return (frm); 709 } 710 711 static uint8_t 712 ieee80211_vht_get_chwidth_ie(struct ieee80211_channel *c) 713 { 714 715 /* 716 * XXX TODO: look at the node configuration as 717 * well? 718 */ 719 720 if (IEEE80211_IS_CHAN_VHT80P80(c)) 721 return IEEE80211_VHT_CHANWIDTH_80P80MHZ; 722 if (IEEE80211_IS_CHAN_VHT160(c)) 723 return IEEE80211_VHT_CHANWIDTH_160MHZ; 724 if (IEEE80211_IS_CHAN_VHT80(c)) 725 return IEEE80211_VHT_CHANWIDTH_80MHZ; 726 if (IEEE80211_IS_CHAN_VHT40(c)) 727 return IEEE80211_VHT_CHANWIDTH_USE_HT; 728 if (IEEE80211_IS_CHAN_VHT20(c)) 729 return IEEE80211_VHT_CHANWIDTH_USE_HT; 730 731 /* We shouldn't get here */ 732 printf("%s: called on a non-VHT channel (freq=%d, flags=0x%08x\n", 733 __func__, (int) c->ic_freq, c->ic_flags); 734 return IEEE80211_VHT_CHANWIDTH_USE_HT; 735 } 736 737 /* 738 * Note: this just uses the current channel information; 739 * it doesn't use the node info after parsing. 740 * 741 * XXX TODO: need to make the basic MCS set configurable. 742 * XXX TODO: read 802.11-2013 to determine what to set 743 * chwidth to when scanning. I have a feeling 744 * it isn't involved in scanning and we shouldn't 745 * be sending it; and I don't yet know what to set 746 * it to for IBSS or hostap where the peer may be 747 * a completely different channel width to us. 748 */ 749 uint8_t * 750 ieee80211_add_vhtinfo(uint8_t *frm, struct ieee80211_node *ni) 751 { 752 memset(frm, '\0', sizeof(struct ieee80211_ie_vht_operation)); 753 754 frm[0] = IEEE80211_ELEMID_VHT_OPMODE; 755 frm[1] = sizeof(struct ieee80211_ie_vht_operation) - 2; 756 frm += 2; 757 758 /* 8-bit chanwidth */ 759 *frm++ = ieee80211_vht_get_chwidth_ie(ni->ni_chan); 760 761 /* 8-bit freq1 */ 762 *frm++ = ni->ni_chan->ic_vht_ch_freq1; 763 764 /* 8-bit freq2 */ 765 *frm++ = ni->ni_chan->ic_vht_ch_freq2; 766 767 /* 16-bit basic MCS set - just MCS0..7 for NSS=1 for now */ 768 ADDSHORT(frm, 0xfffc); 769 770 return (frm); 771 } 772 773 void 774 ieee80211_vht_update_cap(struct ieee80211_node *ni, const uint8_t *vhtcap_ie, 775 const uint8_t *vhtop_ie) 776 { 777 778 ieee80211_parse_vhtcap(ni, vhtcap_ie); 779 ieee80211_parse_vhtopmode(ni, vhtop_ie); 780 } 781 782 static struct ieee80211_channel * 783 findvhtchan(struct ieee80211com *ic, struct ieee80211_channel *c, int vhtflags) 784 { 785 786 return (ieee80211_find_channel(ic, c->ic_freq, 787 (c->ic_flags & ~IEEE80211_CHAN_VHT) | vhtflags)); 788 } 789 790 /* 791 * Handle channel promotion to VHT, similar to ieee80211_ht_adjust_channel(). 792 */ 793 struct ieee80211_channel * 794 ieee80211_vht_adjust_channel(struct ieee80211com *ic, 795 struct ieee80211_channel *chan, int flags) 796 { 797 struct ieee80211_channel *c; 798 799 /* First case - handle channel demotion - if VHT isn't set */ 800 if ((flags & IEEE80211_FVHT_VHT) == 0) { 801 #if 0 802 printf("%s: demoting channel %d/0x%08x\n", __func__, 803 chan->ic_ieee, chan->ic_flags); 804 #endif 805 c = ieee80211_find_channel(ic, chan->ic_freq, 806 chan->ic_flags & ~IEEE80211_CHAN_VHT); 807 if (c == NULL) 808 c = chan; 809 #if 0 810 printf("%s: .. to %d/0x%08x\n", __func__, 811 c->ic_ieee, c->ic_flags); 812 #endif 813 return (c); 814 } 815 816 /* 817 * We can upgrade to VHT - attempt to do so 818 * 819 * Note: we don't clear the HT flags, these are the hints 820 * for HT40U/HT40D when selecting VHT40 or larger channels. 821 */ 822 /* Start with VHT80 */ 823 c = NULL; 824 if ((c == NULL) && (flags & IEEE80211_FVHT_USEVHT160)) 825 c = findvhtchan(ic, chan, IEEE80211_CHAN_VHT80); 826 827 if ((c == NULL) && (flags & IEEE80211_FVHT_USEVHT80P80)) 828 c = findvhtchan(ic, chan, IEEE80211_CHAN_VHT80P80); 829 830 if ((c == NULL) && (flags & IEEE80211_FVHT_USEVHT80)) 831 c = findvhtchan(ic, chan, IEEE80211_CHAN_VHT80); 832 833 if ((c == NULL) && (flags & IEEE80211_FVHT_USEVHT40)) 834 c = findvhtchan(ic, chan, IEEE80211_CHAN_VHT40U); 835 if ((c == NULL) && (flags & IEEE80211_FVHT_USEVHT40)) 836 c = findvhtchan(ic, chan, IEEE80211_CHAN_VHT40D); 837 /* 838 * If we get here, VHT20 is always possible because we checked 839 * for IEEE80211_FVHT_VHT above. 840 */ 841 if (c == NULL) 842 c = findvhtchan(ic, chan, IEEE80211_CHAN_VHT20); 843 844 if (c != NULL) 845 chan = c; 846 847 #if 0 848 printf("%s: selected %d/0x%08x\n", __func__, c->ic_ieee, c->ic_flags); 849 #endif 850 return (chan); 851 } 852 853 /* 854 * Calculate the VHT operation IE for a given node. 855 * 856 * This includes calculating the suitable channel width/parameters 857 * and basic MCS set. 858 * 859 * TODO: ensure I read 9.7.11 Rate Selection for VHT STAs. 860 * TODO: ensure I read 10.39.7 - BSS Basic VHT-MCS and NSS set operation. 861 */ 862 void 863 ieee80211_vht_get_vhtinfo_ie(struct ieee80211_node *ni, 864 struct ieee80211_ie_vht_operation *vhtop, int opmode) 865 { 866 printf("%s: called; TODO!\n", __func__); 867 } 868