1 /*- 2 * Copyright (c) 2001 Atsushi Onoe 3 * Copyright (c) 2002-2005 Sam Leffler, Errno Consulting 4 * All rights reserved. 5 * 6 * Redistribution and use in source and binary forms, with or without 7 * modification, are permitted provided that the following conditions 8 * are met: 9 * 1. Redistributions of source code must retain the above copyright 10 * notice, this list of conditions and the following disclaimer. 11 * 2. Redistributions in binary form must reproduce the above copyright 12 * notice, this list of conditions and the following disclaimer in the 13 * documentation and/or other materials provided with the distribution. 14 * 3. The name of the author may not be used to endorse or promote products 15 * derived from this software without specific prior written permission. 16 * 17 * Alternatively, this software may be distributed under the terms of the 18 * GNU General Public License ("GPL") version 2 as published by the Free 19 * Software Foundation. 20 * 21 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR 22 * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES 23 * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. 24 * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, 25 * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT 26 * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, 27 * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY 28 * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT 29 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF 30 * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. 31 * 32 * $FreeBSD$ 33 */ 34 #ifndef _NET80211_IEEE80211_VAR_H_ 35 #define _NET80211_IEEE80211_VAR_H_ 36 37 /* 38 * Definitions for IEEE 802.11 drivers. 39 */ 40 #define IEEE80211_DEBUG 41 #undef IEEE80211_DEBUG_REFCNT /* node refcnt stuff */ 42 43 /* NB: portability glue must go first */ 44 #ifdef __NetBSD__ 45 #include <net80211/ieee80211_netbsd.h> 46 #elif __FreeBSD__ 47 #include <net80211/ieee80211_freebsd.h> 48 #elif __linux__ 49 #include <net80211/ieee80211_linux.h> 50 #else 51 #error "No support for your operating system!" 52 #endif 53 54 #include <net80211/_ieee80211.h> 55 #include <net80211/ieee80211.h> 56 #include <net80211/ieee80211_crypto.h> 57 #include <net80211/ieee80211_ioctl.h> /* for ieee80211_stats */ 58 #include <net80211/ieee80211_node.h> 59 #include <net80211/ieee80211_proto.h> 60 61 #define IEEE80211_TXPOWER_MAX 100 /* .5 dbM (XXX units?) */ 62 #define IEEE80211_TXPOWER_MIN 0 /* kill radio */ 63 64 #define IEEE80211_DTIM_DEFAULT 1 /* default DTIM period */ 65 #define IEEE80211_BINTVAL_DEFAULT 100 /* default beacon interval (TU's) */ 66 67 #define IEEE80211_BMISS_MAX 2 /* maximum consecutive bmiss allowed */ 68 #define IEEE80211_HWBMISS_DEFAULT 7 /* h/w bmiss threshold (beacons) */ 69 70 #define IEEE80211_PS_SLEEP 0x1 /* STA is in power saving mode */ 71 #define IEEE80211_PS_MAX_QUEUE 50 /* maximum saved packets */ 72 73 #define IEEE80211_FIXED_RATE_NONE -1 74 #define IEEE80211_MCAST_RATE_DEFAULT (2*1) /* default mcast rate (1M) */ 75 76 #define IEEE80211_RTS_DEFAULT IEEE80211_RTS_MAX 77 #define IEEE80211_FRAG_DEFAULT IEEE80211_FRAG_MAX 78 79 #define IEEE80211_MS_TO_TU(x) (((x) * 1024) / 1000) 80 #define IEEE80211_TU_TO_MS(x) (((x) * 1000) / 1024) 81 #define IEEE80211_TU_TO_TICKS(x)(((x) * hz) / 1024) 82 83 struct ieee80211_aclator; 84 struct sysctl_ctx_list; 85 86 struct ieee80211com { 87 SLIST_ENTRY(ieee80211com) ic_next; 88 struct ifnet *ic_ifp; /* associated device */ 89 struct ieee80211_stats ic_stats; /* statistics */ 90 struct sysctl_ctx_list *ic_sysctl; /* dynamic sysctl context */ 91 u_int32_t ic_debug; /* debug msg flags */ 92 int ic_vap; /* virtual AP index */ 93 ieee80211_beacon_lock_t ic_beaconlock; /* beacon update lock */ 94 95 int (*ic_reset)(struct ifnet *); 96 void (*ic_recv_mgmt)(struct ieee80211com *, 97 struct mbuf *, struct ieee80211_node *, 98 int, int, u_int32_t); 99 int (*ic_send_mgmt)(struct ieee80211com *, 100 struct ieee80211_node *, int, int); 101 int (*ic_newstate)(struct ieee80211com *, 102 enum ieee80211_state, int); 103 void (*ic_newassoc)(struct ieee80211_node *, int); 104 void (*ic_updateslot)(struct ifnet *); 105 void (*ic_set_tim)(struct ieee80211_node *, int); 106 int (*ic_raw_xmit)(struct ieee80211_node *, 107 struct mbuf *, 108 const struct ieee80211_bpf_params *); 109 u_int8_t ic_myaddr[IEEE80211_ADDR_LEN]; 110 struct ieee80211_rateset ic_sup_rates[IEEE80211_MODE_MAX]; 111 struct ieee80211_channel ic_channels[IEEE80211_CHAN_MAX+1]; 112 u_int8_t ic_chan_avail[IEEE80211_CHAN_BYTES]; 113 u_int8_t ic_chan_active[IEEE80211_CHAN_BYTES]; 114 u_int8_t ic_chan_scan[IEEE80211_CHAN_BYTES]; 115 struct ieee80211_node_table ic_scan; /* scan candidates */ 116 struct ifqueue ic_mgtq; 117 u_int32_t ic_flags; /* state flags */ 118 u_int32_t ic_flags_ext; /* extended state flags */ 119 u_int32_t ic_caps; /* capabilities */ 120 u_int16_t ic_modecaps; /* set of mode capabilities */ 121 u_int16_t ic_curmode; /* current mode */ 122 enum ieee80211_phytype ic_phytype; /* XXX wrong for multi-mode */ 123 enum ieee80211_opmode ic_opmode; /* operation mode */ 124 enum ieee80211_state ic_state; /* 802.11 state */ 125 enum ieee80211_protmode ic_protmode; /* 802.11g protection mode */ 126 enum ieee80211_roamingmode ic_roaming; /* roaming mode */ 127 struct ieee80211_node_table ic_sta; /* stations/neighbors */ 128 u_int32_t *ic_aid_bitmap; /* association id map */ 129 u_int16_t ic_max_aid; 130 u_int16_t ic_sta_assoc; /* stations associated */ 131 u_int16_t ic_ps_sta; /* stations in power save */ 132 u_int16_t ic_ps_pending; /* ps sta's w/ pending frames */ 133 u_int8_t *ic_tim_bitmap; /* power-save stations w/ data*/ 134 u_int16_t ic_tim_len; /* ic_tim_bitmap size (bytes) */ 135 u_int8_t ic_dtim_period; /* DTIM period */ 136 u_int8_t ic_dtim_count; /* DTIM count for last bcn */ 137 struct ifmedia ic_media; /* interface media config */ 138 struct bpf_if *ic_rawbpf; /* packet filter structure */ 139 struct ieee80211_node *ic_bss; /* information for this node */ 140 struct ieee80211_channel *ic_ibss_chan; 141 struct ieee80211_channel *ic_curchan; /* current channel */ 142 int ic_fixed_rate; /* index to ic_sup_rates[] */ 143 int ic_mcast_rate; /* rate for mcast frames */ 144 u_int16_t ic_rtsthreshold; 145 u_int16_t ic_fragthreshold; 146 u_int8_t ic_bmissthreshold; 147 u_int8_t ic_bmiss_count; /* current beacon miss count */ 148 int ic_bmiss_max; /* max bmiss before scan */ 149 u_int16_t ic_swbmiss_count;/* beacons in last period */ 150 u_int16_t ic_swbmiss_period;/* s/w bmiss period */ 151 struct callout ic_swbmiss; /* s/w beacon miss timer */ 152 struct ieee80211_node *(*ic_node_alloc)(struct ieee80211_node_table*); 153 void (*ic_node_free)(struct ieee80211_node *); 154 void (*ic_node_cleanup)(struct ieee80211_node *); 155 u_int8_t (*ic_node_getrssi)(const struct ieee80211_node*); 156 u_int16_t ic_lintval; /* listen interval */ 157 u_int16_t ic_bintval; /* beacon interval */ 158 u_int16_t ic_holdover; /* PM hold over duration */ 159 u_int16_t ic_txmin; /* min tx retry count */ 160 u_int16_t ic_txmax; /* max tx retry count */ 161 u_int16_t ic_txlifetime; /* tx lifetime */ 162 u_int16_t ic_txpowlimit; /* global tx power limit */ 163 u_int16_t ic_nonerpsta; /* # non-ERP stations */ 164 u_int16_t ic_longslotsta; /* # long slot time stations */ 165 int ic_mgt_timer; /* mgmt timeout */ 166 int ic_inact_timer; /* inactivity timer wait */ 167 int ic_des_esslen; 168 u_int8_t ic_des_essid[IEEE80211_NWID_LEN]; 169 struct ieee80211_channel *ic_des_chan; /* desired channel */ 170 u_int8_t ic_des_bssid[IEEE80211_ADDR_LEN]; 171 void *ic_opt_ie; /* user-specified IE's */ 172 u_int16_t ic_opt_ie_len; /* length of ni_opt_ie */ 173 /* 174 * Inactivity timer settings for nodes. 175 */ 176 int ic_inact_init; /* initial setting */ 177 int ic_inact_auth; /* auth but not assoc setting */ 178 int ic_inact_run; /* authorized setting */ 179 int ic_inact_probe; /* inactive probe time */ 180 181 /* 182 * WME/WMM state. 183 */ 184 struct ieee80211_wme_state ic_wme; 185 186 /* 187 * Cipher state/configuration. 188 */ 189 struct ieee80211_crypto_state ic_crypto; 190 #define ic_nw_keys ic_crypto.cs_nw_keys /* XXX compatibility */ 191 #define ic_def_txkey ic_crypto.cs_def_txkey /* XXX compatibility */ 192 193 /* 194 * 802.1x glue. When an authenticator attaches it 195 * fills in this section. We assume that when ic_ec 196 * is setup that the methods are safe to call. 197 */ 198 const struct ieee80211_authenticator *ic_auth; 199 struct eapolcom *ic_ec; 200 201 /* 202 * Access control glue. When a control agent attaches 203 * it fills in this section. We assume that when ic_ac 204 * is setup that the methods are safe to call. 205 */ 206 const struct ieee80211_aclator *ic_acl; 207 void *ic_as; 208 }; 209 210 #define IEEE80211_ADDR_EQ(a1,a2) (memcmp(a1,a2,IEEE80211_ADDR_LEN) == 0) 211 #define IEEE80211_ADDR_COPY(dst,src) memcpy(dst,src,IEEE80211_ADDR_LEN) 212 213 /* ic_flags */ 214 /* NB: bits 0x4c available */ 215 #define IEEE80211_F_FF 0x00000001 /* CONF: ATH FF enabled */ 216 #define IEEE80211_F_TURBOP 0x00000002 /* CONF: ATH Turbo enabled*/ 217 #define IEEE80211_F_BURST 0x00000004 /* CONF: bursting enabled */ 218 /* NB: this is intentionally setup to be IEEE80211_CAPINFO_PRIVACY */ 219 #define IEEE80211_F_PRIVACY 0x00000010 /* CONF: privacy enabled */ 220 #define IEEE80211_F_PUREG 0x00000020 /* CONF: 11g w/o 11b sta's */ 221 #define IEEE80211_F_SCAN 0x00000080 /* STATUS: scanning */ 222 #define IEEE80211_F_ASCAN 0x00000100 /* STATUS: active scan */ 223 #define IEEE80211_F_SIBSS 0x00000200 /* STATUS: start IBSS */ 224 /* NB: this is intentionally setup to be IEEE80211_CAPINFO_SHORT_SLOTTIME */ 225 #define IEEE80211_F_SHSLOT 0x00000400 /* STATUS: use short slot time*/ 226 #define IEEE80211_F_PMGTON 0x00000800 /* CONF: Power mgmt enable */ 227 #define IEEE80211_F_DESBSSID 0x00001000 /* CONF: des_bssid is set */ 228 #define IEEE80211_F_WME 0x00002000 /* CONF: enable WME use */ 229 #define IEEE80211_F_BGSCAN 0x00004000 /* CONF: bg scan enabled (???)*/ 230 #define IEEE80211_F_SWRETRY 0x00008000 /* CONF: sw tx retry enabled */ 231 #define IEEE80211_F_TXPOW_FIXED 0x00010000 /* TX Power: fixed rate */ 232 #define IEEE80211_F_IBSSON 0x00020000 /* CONF: IBSS creation enable */ 233 #define IEEE80211_F_SHPREAMBLE 0x00040000 /* STATUS: use short preamble */ 234 #define IEEE80211_F_DATAPAD 0x00080000 /* CONF: do alignment pad */ 235 #define IEEE80211_F_USEPROT 0x00100000 /* STATUS: protection enabled */ 236 #define IEEE80211_F_USEBARKER 0x00200000 /* STATUS: use barker preamble*/ 237 #define IEEE80211_F_TIMUPDATE 0x00400000 /* STATUS: update beacon tim */ 238 #define IEEE80211_F_WPA1 0x00800000 /* CONF: WPA enabled */ 239 #define IEEE80211_F_WPA2 0x01000000 /* CONF: WPA2 enabled */ 240 #define IEEE80211_F_WPA 0x01800000 /* CONF: WPA/WPA2 enabled */ 241 #define IEEE80211_F_DROPUNENC 0x02000000 /* CONF: drop unencrypted */ 242 #define IEEE80211_F_COUNTERM 0x04000000 /* CONF: TKIP countermeasures */ 243 #define IEEE80211_F_HIDESSID 0x08000000 /* CONF: hide SSID in beacon */ 244 #define IEEE80211_F_NOBRIDGE 0x10000000 /* CONF: dis. internal bridge */ 245 #define IEEE80211_F_WMEUPDATE 0x20000000 /* STATUS: update beacon wme */ 246 247 /* ic_flags_ext */ 248 #define IEEE80211_FEXT_WDS 0x00000001 /* CONF: 4 addr allowed */ 249 /* 0x00000006 reserved */ 250 #define IEEE80211_FEXT_BGSCAN 0x00000008 /* STATUS: enable full bgscan completion */ 251 #define IEEE80211_FEXT_ERPUPDATE 0x00000200 /* STATUS: update ERP element */ 252 #define IEEE80211_FEXT_SWBMISS 0x00000400 /* CONF: do bmiss in s/w */ 253 #define IEEE80211_FEXT_PROBECHAN 0x00020000 /* CONF: probe passive channel*/ 254 255 /* ic_caps */ 256 #define IEEE80211_C_WEP 0x00000001 /* CAPABILITY: WEP available */ 257 #define IEEE80211_C_TKIP 0x00000002 /* CAPABILITY: TKIP available */ 258 #define IEEE80211_C_AES 0x00000004 /* CAPABILITY: AES OCB avail */ 259 #define IEEE80211_C_AES_CCM 0x00000008 /* CAPABILITY: AES CCM avail */ 260 #define IEEE80211_C_CKIP 0x00000020 /* CAPABILITY: CKIP available */ 261 #define IEEE80211_C_FF 0x00000040 /* CAPABILITY: ATH FF avail */ 262 #define IEEE80211_C_TURBOP 0x00000080 /* CAPABILITY: ATH Turbo avail*/ 263 #define IEEE80211_C_IBSS 0x00000100 /* CAPABILITY: IBSS available */ 264 #define IEEE80211_C_PMGT 0x00000200 /* CAPABILITY: Power mgmt */ 265 #define IEEE80211_C_HOSTAP 0x00000400 /* CAPABILITY: HOSTAP avail */ 266 #define IEEE80211_C_AHDEMO 0x00000800 /* CAPABILITY: Old Adhoc Demo */ 267 #define IEEE80211_C_SWRETRY 0x00001000 /* CAPABILITY: sw tx retry */ 268 #define IEEE80211_C_TXPMGT 0x00002000 /* CAPABILITY: tx power mgmt */ 269 #define IEEE80211_C_SHSLOT 0x00004000 /* CAPABILITY: short slottime */ 270 #define IEEE80211_C_SHPREAMBLE 0x00008000 /* CAPABILITY: short preamble */ 271 #define IEEE80211_C_MONITOR 0x00010000 /* CAPABILITY: monitor mode */ 272 #define IEEE80211_C_TKIPMIC 0x00020000 /* CAPABILITY: TKIP MIC avail */ 273 #define IEEE80211_C_WPA1 0x00800000 /* CAPABILITY: WPA1 avail */ 274 #define IEEE80211_C_WPA2 0x01000000 /* CAPABILITY: WPA2 avail */ 275 #define IEEE80211_C_WPA 0x01800000 /* CAPABILITY: WPA1+WPA2 avail*/ 276 #define IEEE80211_C_BURST 0x02000000 /* CAPABILITY: frame bursting */ 277 #define IEEE80211_C_WME 0x04000000 /* CAPABILITY: WME avail */ 278 #define IEEE80211_C_WDS 0x08000000 /* CAPABILITY: 4-addr support */ 279 /* 0x10000000 reserved */ 280 #define IEEE80211_C_BGSCAN 0x20000000 /* CAPABILITY: bg scanning */ 281 #define IEEE80211_C_TXFRAG 0x40000000 /* CAPABILITY: tx fragments */ 282 /* XXX protection/barker? */ 283 284 #define IEEE80211_C_CRYPTO 0x0000002f /* CAPABILITY: crypto alg's */ 285 286 void ieee80211_ifattach(struct ieee80211com *); 287 void ieee80211_ifdetach(struct ieee80211com *); 288 void ieee80211_announce(struct ieee80211com *); 289 void ieee80211_media_init(struct ieee80211com *, 290 ifm_change_cb_t, ifm_stat_cb_t); 291 struct ieee80211com *ieee80211_find_vap(const u_int8_t mac[IEEE80211_ADDR_LEN]); 292 int ieee80211_media_change(struct ifnet *); 293 void ieee80211_media_status(struct ifnet *, struct ifmediareq *); 294 int ieee80211_ioctl(struct ieee80211com *, u_long, caddr_t); 295 int ieee80211_cfgget(struct ieee80211com *, u_long, caddr_t); 296 int ieee80211_cfgset(struct ieee80211com *, u_long, caddr_t); 297 void ieee80211_watchdog(struct ieee80211com *); 298 int ieee80211_rate2media(struct ieee80211com *, int, 299 enum ieee80211_phymode); 300 int ieee80211_media2rate(int); 301 int ieee80211_mhz2ieee(u_int, u_int); 302 int ieee80211_chan2ieee(struct ieee80211com *, struct ieee80211_channel *); 303 u_int ieee80211_ieee2mhz(u_int, u_int); 304 int ieee80211_setmode(struct ieee80211com *, enum ieee80211_phymode); 305 enum ieee80211_phymode ieee80211_chan2mode(struct ieee80211com *, 306 struct ieee80211_channel *); 307 308 /* 309 * Key update synchronization methods. XXX should not be visible. 310 */ 311 static __inline void 312 ieee80211_key_update_begin(struct ieee80211com *ic) 313 { 314 ic->ic_crypto.cs_key_update_begin(ic); 315 } 316 static __inline void 317 ieee80211_key_update_end(struct ieee80211com *ic) 318 { 319 ic->ic_crypto.cs_key_update_end(ic); 320 } 321 322 /* 323 * XXX these need to be here for IEEE80211_F_DATAPAD 324 */ 325 326 /* 327 * Return the space occupied by the 802.11 header and any 328 * padding required by the driver. This works for a 329 * management or data frame. 330 */ 331 static __inline int 332 ieee80211_hdrspace(struct ieee80211com *ic, const void *data) 333 { 334 int size = ieee80211_hdrsize(data); 335 if (ic->ic_flags & IEEE80211_F_DATAPAD) 336 size = roundup(size, sizeof(u_int32_t)); 337 return size; 338 } 339 340 /* 341 * Like ieee80211_hdrspace, but handles any type of frame. 342 */ 343 static __inline int 344 ieee80211_anyhdrspace(struct ieee80211com *ic, const void *data) 345 { 346 int size = ieee80211_anyhdrsize(data); 347 if (ic->ic_flags & IEEE80211_F_DATAPAD) 348 size = roundup(size, sizeof(u_int32_t)); 349 return size; 350 } 351 352 #define IEEE80211_MSG_DEBUG 0x40000000 /* IFF_DEBUG equivalent */ 353 #define IEEE80211_MSG_DUMPPKTS 0x20000000 /* IFF_LINK2 equivalant */ 354 #define IEEE80211_MSG_CRYPTO 0x10000000 /* crypto work */ 355 #define IEEE80211_MSG_INPUT 0x08000000 /* input handling */ 356 #define IEEE80211_MSG_XRATE 0x04000000 /* rate set handling */ 357 #define IEEE80211_MSG_ELEMID 0x02000000 /* element id parsing */ 358 #define IEEE80211_MSG_NODE 0x01000000 /* node handling */ 359 #define IEEE80211_MSG_ASSOC 0x00800000 /* association handling */ 360 #define IEEE80211_MSG_AUTH 0x00400000 /* authentication handling */ 361 #define IEEE80211_MSG_SCAN 0x00200000 /* scanning */ 362 #define IEEE80211_MSG_OUTPUT 0x00100000 /* output handling */ 363 #define IEEE80211_MSG_STATE 0x00080000 /* state machine */ 364 #define IEEE80211_MSG_POWER 0x00040000 /* power save handling */ 365 #define IEEE80211_MSG_DOT1X 0x00020000 /* 802.1x authenticator */ 366 #define IEEE80211_MSG_DOT1XSM 0x00010000 /* 802.1x state machine */ 367 #define IEEE80211_MSG_RADIUS 0x00008000 /* 802.1x radius client */ 368 #define IEEE80211_MSG_RADDUMP 0x00004000 /* dump 802.1x radius packets */ 369 #define IEEE80211_MSG_RADKEYS 0x00002000 /* dump 802.1x keys */ 370 #define IEEE80211_MSG_WPA 0x00001000 /* WPA/RSN protocol */ 371 #define IEEE80211_MSG_ACL 0x00000800 /* ACL handling */ 372 #define IEEE80211_MSG_WME 0x00000400 /* WME protocol */ 373 #define IEEE80211_MSG_SUPERG 0x00000200 /* Atheros SuperG protocol */ 374 #define IEEE80211_MSG_DOTH 0x00000100 /* 802.11h support */ 375 #define IEEE80211_MSG_INACT 0x00000080 /* inactivity handling */ 376 #define IEEE80211_MSG_ROAM 0x00000040 /* sta-mode roaming */ 377 378 #define IEEE80211_MSG_ANY 0xffffffff /* anything */ 379 380 #ifdef IEEE80211_DEBUG 381 #define ieee80211_msg(_ic, _m) ((_ic)->ic_debug & (_m)) 382 #define IEEE80211_DPRINTF(_ic, _m, _fmt, ...) do { \ 383 if (ieee80211_msg(_ic, _m)) \ 384 ieee80211_note(_ic, _fmt, __VA_ARGS__); \ 385 } while (0) 386 #define IEEE80211_NOTE(_ic, _m, _ni, _fmt, ...) do { \ 387 if (ieee80211_msg(_ic, _m)) \ 388 ieee80211_note_mac(_ic, (_ni)->ni_macaddr, _fmt, __VA_ARGS__);\ 389 } while (0) 390 #define IEEE80211_NOTE_MAC(_ic, _m, _mac, _fmt, ...) do { \ 391 if (ieee80211_msg(_ic, _m)) \ 392 ieee80211_note_mac(_ic, _mac, _fmt, __VA_ARGS__); \ 393 } while (0) 394 #define IEEE80211_NOTE_FRAME(_ic, _m, _wh, _fmt, ...) do { \ 395 if (ieee80211_msg(_ic, _m)) \ 396 ieee80211_note_frame(_ic, _wh, _fmt, __VA_ARGS__); \ 397 } while (0) 398 void ieee80211_note(struct ieee80211com *ic, const char *fmt, ...); 399 void ieee80211_note_mac(struct ieee80211com *ic, 400 const u_int8_t mac[IEEE80211_ADDR_LEN], const char *fmt, ...); 401 void ieee80211_note_frame(struct ieee80211com *ic, 402 const struct ieee80211_frame *wh, const char *fmt, ...); 403 #define ieee80211_msg_debug(_ic) \ 404 ((_ic)->ic_debug & IEEE80211_MSG_DEBUG) 405 #define ieee80211_msg_dumppkts(_ic) \ 406 ((_ic)->ic_debug & IEEE80211_MSG_DUMPPKTS) 407 #define ieee80211_msg_input(_ic) \ 408 ((_ic)->ic_debug & IEEE80211_MSG_INPUT) 409 #define ieee80211_msg_radius(_ic) \ 410 ((_ic)->ic_debug & IEEE80211_MSG_RADIUS) 411 #define ieee80211_msg_dumpradius(_ic) \ 412 ((_ic)->ic_debug & IEEE80211_MSG_RADDUMP) 413 #define ieee80211_msg_dumpradkeys(_ic) \ 414 ((_ic)->ic_debug & IEEE80211_MSG_RADKEYS) 415 #define ieee80211_msg_scan(_ic) \ 416 ((_ic)->ic_debug & IEEE80211_MSG_SCAN) 417 #define ieee80211_msg_assoc(_ic) \ 418 ((_ic)->ic_debug & IEEE80211_MSG_ASSOC) 419 #else 420 #define IEEE80211_DPRINTF(_ic, _m, _fmt, ...) 421 #define IEEE80211_NOTE_FRAME(_ic, _m, _wh, _fmt, ...) 422 #define IEEE80211_NOTE_MAC(_ic, _m, _mac, _fmt, ...) 423 #define ieee80211_msg_dumppkts(_ic) 0 424 #define ieee80211_msg(_ic, _m) 0 425 #endif 426 427 #endif /* _NET80211_IEEE80211_VAR_H_ */ 428