1 /*- 2 * Copyright (c) 2005-2009 Sam Leffler, Errno Consulting 3 * All rights reserved. 4 * 5 * Redistribution and use in source and binary forms, with or without 6 * modification, are permitted provided that the following conditions 7 * are met: 8 * 1. Redistributions of source code must retain the above copyright 9 * notice, this list of conditions and the following disclaimer. 10 * 2. Redistributions in binary form must reproduce the above copyright 11 * notice, this list of conditions and the following disclaimer in the 12 * documentation and/or other materials provided with the distribution. 13 * 14 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR 15 * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES 16 * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. 17 * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, 18 * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT 19 * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, 20 * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY 21 * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT 22 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF 23 * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. 24 * 25 * $FreeBSD$ 26 */ 27 #ifndef _NET80211_IEEE80211_SCAN_H_ 28 #define _NET80211_IEEE80211_SCAN_H_ 29 30 /* 31 * 802.11 scanning support. 32 * 33 * Scanning is the procedure by which a station locates a bss to join 34 * (infrastructure/ibss mode), or a channel to use (when operating as 35 * an ap or ibss master). Scans are either "active" or "passive". An 36 * active scan causes one or more probe request frames to be sent on 37 * visiting each channel. A passive request causes each channel in the 38 * scan set to be visited but no frames to be transmitted; the station 39 * only listens for traffic. Note that active scanning may still need 40 * to listen for traffic before sending probe request frames depending 41 * on regulatory constraints; the 802.11 layer handles this by generating 42 * a callback when scanning on a ``passive channel'' when the 43 * IEEE80211_FEXT_PROBECHAN flag is set. 44 * 45 * A scan operation involves constructing a set of channels to inspect 46 * (the scan set), visiting each channel and collecting information 47 * (e.g. what bss are present), and then analyzing the results to make 48 * decisions like which bss to join. This process needs to be as fast 49 * as possible so we do things like intelligently construct scan sets 50 * and dwell on a channel only as long as necessary. The scan code also 51 * maintains a cache of recent scan results and uses it to bypass scanning 52 * whenever possible. The scan cache is also used to enable roaming 53 * between access points when operating in infrastructure mode. 54 * 55 * Scanning is handled with pluggable modules that implement "policy" 56 * per-operating mode. The core scanning support provides an 57 * instrastructure to support these modules and exports a common api 58 * to the rest of the 802.11 layer. Policy modules decide what 59 * channels to visit, what state to record to make decisions (e.g. ap 60 * mode scanning for auto channel selection keeps significantly less 61 * state than sta mode scanning for an ap to associate to), and selects 62 * the final station/channel to return as the result of a scan. 63 * 64 * Scanning is done synchronously when initially bringing a vap to an 65 * operational state and optionally in the background to maintain the 66 * scan cache for doing roaming and rogue ap monitoring. Scanning is 67 * not tied to the 802.11 state machine that governs vaps though there 68 * is linkage to the IEEE80211_SCAN state. Only one vap at a time may 69 * be scanning; this scheduling policy is handled in ieee80211_new_state 70 * and is invisible to the scanning code. 71 */ 72 #define IEEE80211_SCAN_MAX IEEE80211_CHAN_MAX 73 74 struct ieee80211_scanner; /* scan policy state */ 75 76 struct ieee80211_scan_ssid { 77 int len; /* length in bytes */ 78 uint8_t ssid[IEEE80211_NWID_LEN]; /* ssid contents */ 79 }; 80 #define IEEE80211_SCAN_MAX_SSID 1 /* max # ssid's to probe */ 81 82 /* 83 * Scan state visible to the 802.11 layer. Scan parameters and 84 * results are stored in this data structure. The ieee80211_scan_state 85 * structure is extended with space that is maintained private to 86 * the core scanning support. We allocate one instance and link it 87 * to the ieee80211com structure; then share it between all associated 88 * vaps. We could allocate multiple of these, e.g. to hold multiple 89 * scan results, but this is sufficient for current needs. 90 */ 91 struct ieee80211_scan_state { 92 struct ieee80211vap *ss_vap; 93 struct ieee80211com *ss_ic; 94 const struct ieee80211_scanner *ss_ops; /* policy hookup, see below */ 95 void *ss_priv; /* scanner private state */ 96 uint16_t ss_flags; 97 #define IEEE80211_SCAN_NOPICK 0x0001 /* scan only, no selection */ 98 #define IEEE80211_SCAN_ACTIVE 0x0002 /* active scan (probe req) */ 99 #define IEEE80211_SCAN_PICK1ST 0x0004 /* ``hey sailor'' mode */ 100 #define IEEE80211_SCAN_BGSCAN 0x0008 /* bg scan, exit ps at end */ 101 #define IEEE80211_SCAN_ONCE 0x0010 /* do one complete pass */ 102 #define IEEE80211_SCAN_NOBCAST 0x0020 /* no broadcast probe req */ 103 #define IEEE80211_SCAN_NOJOIN 0x0040 /* no auto-sequencing */ 104 #define IEEE80211_SCAN_GOTPICK 0x1000 /* got candidate, can stop */ 105 uint8_t ss_nssid; /* # ssid's to probe/match */ 106 struct ieee80211_scan_ssid ss_ssid[IEEE80211_SCAN_MAX_SSID]; 107 /* ssid's to probe/match */ 108 /* ordered channel set */ 109 struct ieee80211_channel *ss_chans[IEEE80211_SCAN_MAX]; 110 uint16_t ss_next; /* ix of next chan to scan */ 111 uint16_t ss_last; /* ix+1 of last chan to scan */ 112 unsigned long ss_mindwell; /* min dwell on channel */ 113 unsigned long ss_maxdwell; /* max dwell on channel */ 114 }; 115 116 /* 117 * The upper 16 bits of the flags word is used to communicate 118 * information to the scanning code that is NOT recorded in 119 * ss_flags. It might be better to split this stuff out into 120 * a separate variable to avoid confusion. 121 */ 122 #define IEEE80211_SCAN_FLUSH 0x00010000 /* flush candidate table */ 123 #define IEEE80211_SCAN_NOSSID 0x80000000 /* don't update ssid list */ 124 125 struct ieee80211com; 126 void ieee80211_scan_attach(struct ieee80211com *); 127 void ieee80211_scan_detach(struct ieee80211com *); 128 void ieee80211_scan_vattach(struct ieee80211vap *); 129 void ieee80211_scan_vdetach(struct ieee80211vap *); 130 131 void ieee80211_scan_dump_channels(const struct ieee80211_scan_state *); 132 133 #define IEEE80211_SCAN_FOREVER 0x7fffffff 134 int ieee80211_start_scan(struct ieee80211vap *, int flags, 135 u_int duration, u_int mindwell, u_int maxdwell, 136 u_int nssid, const struct ieee80211_scan_ssid ssids[]); 137 int ieee80211_check_scan(struct ieee80211vap *, int flags, 138 u_int duration, u_int mindwell, u_int maxdwell, 139 u_int nssid, const struct ieee80211_scan_ssid ssids[]); 140 int ieee80211_check_scan_current(struct ieee80211vap *); 141 int ieee80211_bg_scan(struct ieee80211vap *, int); 142 void ieee80211_cancel_scan(struct ieee80211vap *); 143 void ieee80211_cancel_anyscan(struct ieee80211vap *); 144 void ieee80211_scan_next(struct ieee80211vap *); 145 void ieee80211_scan_done(struct ieee80211vap *); 146 void ieee80211_probe_curchan(struct ieee80211vap *, int); 147 struct ieee80211_channel *ieee80211_scan_pickchannel(struct ieee80211com *, int); 148 149 struct ieee80211_scanparams; 150 void ieee80211_add_scan(struct ieee80211vap *, 151 const struct ieee80211_scanparams *, 152 const struct ieee80211_frame *, 153 int subtype, int rssi, int noise); 154 void ieee80211_scan_timeout(struct ieee80211com *); 155 156 void ieee80211_scan_assoc_success(struct ieee80211vap *, 157 const uint8_t mac[IEEE80211_ADDR_LEN]); 158 enum { 159 IEEE80211_SCAN_FAIL_TIMEOUT = 1, /* no response to mgmt frame */ 160 IEEE80211_SCAN_FAIL_STATUS = 2 /* negative response to " " */ 161 }; 162 void ieee80211_scan_assoc_fail(struct ieee80211vap *, 163 const uint8_t mac[IEEE80211_ADDR_LEN], int reason); 164 void ieee80211_scan_flush(struct ieee80211vap *); 165 166 struct ieee80211_scan_entry; 167 typedef void ieee80211_scan_iter_func(void *, 168 const struct ieee80211_scan_entry *); 169 void ieee80211_scan_iterate(struct ieee80211vap *, 170 ieee80211_scan_iter_func, void *); 171 enum { 172 IEEE80211_BPARSE_BADIELEN = 0x01, /* ie len past end of frame */ 173 IEEE80211_BPARSE_RATES_INVALID = 0x02, /* invalid RATES ie */ 174 IEEE80211_BPARSE_XRATES_INVALID = 0x04, /* invalid XRATES ie */ 175 IEEE80211_BPARSE_SSID_INVALID = 0x08, /* invalid SSID ie */ 176 IEEE80211_BPARSE_CHAN_INVALID = 0x10, /* invalid FH/DSPARMS chan */ 177 IEEE80211_BPARSE_OFFCHAN = 0x20, /* DSPARMS chan != curchan */ 178 IEEE80211_BPARSE_BINTVAL_INVALID= 0x40, /* invalid beacon interval */ 179 IEEE80211_BPARSE_CSA_INVALID = 0x80, /* invalid CSA ie */ 180 }; 181 182 /* 183 * Parameters supplied when adding/updating an entry in a 184 * scan cache. Pointer variables should be set to NULL 185 * if no data is available. Pointer references can be to 186 * local data; any information that is saved will be copied. 187 * All multi-byte values must be in host byte order. 188 */ 189 struct ieee80211_scanparams { 190 uint8_t status; /* bitmask of IEEE80211_BPARSE_* */ 191 uint8_t chan; /* channel # from FH/DSPARMS */ 192 uint8_t bchan; /* curchan's channel # */ 193 uint8_t fhindex; 194 uint16_t fhdwell; /* FHSS dwell interval */ 195 uint16_t capinfo; /* 802.11 capabilities */ 196 uint16_t erp; /* NB: 0x100 indicates ie present */ 197 uint16_t bintval; 198 uint8_t timoff; 199 uint8_t *ies; /* all captured ies */ 200 size_t ies_len; /* length of all captured ies */ 201 uint8_t *tim; 202 uint8_t *tstamp; 203 uint8_t *country; 204 uint8_t *ssid; 205 uint8_t *rates; 206 uint8_t *xrates; 207 uint8_t *doth; 208 uint8_t *wpa; 209 uint8_t *rsn; 210 uint8_t *wme; 211 uint8_t *htcap; 212 uint8_t *htinfo; 213 uint8_t *ath; 214 uint8_t *tdma; 215 uint8_t *csa; 216 uint8_t *quiet; 217 uint8_t *meshid; 218 uint8_t *meshconf; 219 uint8_t *spare[3]; 220 }; 221 222 /* 223 * Scan cache entry format used when exporting data from a policy 224 * module; this data may be represented some other way internally. 225 */ 226 struct ieee80211_scan_entry { 227 uint8_t se_macaddr[IEEE80211_ADDR_LEN]; 228 uint8_t se_bssid[IEEE80211_ADDR_LEN]; 229 /* XXX can point inside se_ies */ 230 uint8_t se_ssid[2+IEEE80211_NWID_LEN]; 231 uint8_t se_rates[2+IEEE80211_RATE_MAXSIZE]; 232 uint8_t se_xrates[2+IEEE80211_RATE_MAXSIZE]; 233 union { 234 uint8_t data[8]; 235 u_int64_t tsf; 236 } se_tstamp; /* from last rcv'd beacon */ 237 uint16_t se_intval; /* beacon interval (host byte order) */ 238 uint16_t se_capinfo; /* capabilities (host byte order) */ 239 struct ieee80211_channel *se_chan;/* channel where sta found */ 240 uint16_t se_timoff; /* byte offset to TIM ie */ 241 uint16_t se_fhdwell; /* FH only (host byte order) */ 242 uint8_t se_fhindex; /* FH only */ 243 uint8_t se_dtimperiod; /* DTIM period */ 244 uint16_t se_erp; /* ERP from beacon/probe resp */ 245 int8_t se_rssi; /* avg'd recv ssi */ 246 int8_t se_noise; /* noise floor */ 247 uint8_t se_cc[2]; /* captured country code */ 248 uint8_t se_meshid[2+IEEE80211_MESHID_LEN]; 249 struct ieee80211_ies se_ies; /* captured ie's */ 250 u_int se_age; /* age of entry (0 on create) */ 251 }; 252 MALLOC_DECLARE(M_80211_SCAN); 253 254 /* 255 * Template for an in-kernel scan policy module. 256 * Modules register with the scanning code and are 257 * typically loaded as needed. 258 */ 259 struct ieee80211_scanner { 260 const char *scan_name; /* printable name */ 261 int (*scan_attach)(struct ieee80211_scan_state *); 262 int (*scan_detach)(struct ieee80211_scan_state *); 263 int (*scan_start)(struct ieee80211_scan_state *, 264 struct ieee80211vap *); 265 int (*scan_restart)(struct ieee80211_scan_state *, 266 struct ieee80211vap *); 267 int (*scan_cancel)(struct ieee80211_scan_state *, 268 struct ieee80211vap *); 269 int (*scan_end)(struct ieee80211_scan_state *, 270 struct ieee80211vap *); 271 int (*scan_flush)(struct ieee80211_scan_state *); 272 struct ieee80211_channel *(*scan_pickchan)( 273 struct ieee80211_scan_state *, int); 274 /* add an entry to the cache */ 275 int (*scan_add)(struct ieee80211_scan_state *, 276 const struct ieee80211_scanparams *, 277 const struct ieee80211_frame *, 278 int subtype, int rssi, int noise); 279 /* age and/or purge entries in the cache */ 280 void (*scan_age)(struct ieee80211_scan_state *); 281 /* note that association failed for an entry */ 282 void (*scan_assoc_fail)(struct ieee80211_scan_state *, 283 const uint8_t macaddr[IEEE80211_ADDR_LEN], 284 int reason); 285 /* note that association succeed for an entry */ 286 void (*scan_assoc_success)(struct ieee80211_scan_state *, 287 const uint8_t macaddr[IEEE80211_ADDR_LEN]); 288 /* iterate over entries in the scan cache */ 289 void (*scan_iterate)(struct ieee80211_scan_state *, 290 ieee80211_scan_iter_func *, void *); 291 void (*scan_spare0)(void); 292 void (*scan_spare1)(void); 293 void (*scan_spare2)(void); 294 void (*scan_spare4)(void); 295 }; 296 void ieee80211_scanner_register(enum ieee80211_opmode, 297 const struct ieee80211_scanner *); 298 void ieee80211_scanner_unregister(enum ieee80211_opmode, 299 const struct ieee80211_scanner *); 300 void ieee80211_scanner_unregister_all(const struct ieee80211_scanner *); 301 const struct ieee80211_scanner *ieee80211_scanner_get(enum ieee80211_opmode); 302 void ieee80211_scan_update_locked(struct ieee80211vap *vap, 303 const struct ieee80211_scanner *scan); 304 void ieee80211_scan_copy_ssid(struct ieee80211vap *vap, 305 struct ieee80211_scan_state *ss, 306 int nssid, const struct ieee80211_scan_ssid ssids[]); 307 void ieee80211_scan_dump_probe_beacon(uint8_t subtype, int isnew, 308 const uint8_t mac[IEEE80211_ADDR_LEN], 309 const struct ieee80211_scanparams *sp, int rssi); 310 int ieee80211_start_scan_locked(const struct ieee80211_scanner *scan, 311 struct ieee80211vap *vap, int flags, u_int duration, 312 u_int mindwell, u_int maxdwell, 313 u_int nssid, const struct ieee80211_scan_ssid ssids[]); 314 void ieee80211_scan_dump(struct ieee80211_scan_state *ss); 315 316 #endif /* _NET80211_IEEE80211_SCAN_H_ */ 317