1 /*- 2 * SPDX-License-Identifier: BSD-2-Clause-FreeBSD 3 * 4 * Copyright (c) 2007-2008 Sam Leffler, Errno Consulting 5 * All rights reserved. 6 * 7 * Redistribution and use in source and binary forms, with or without 8 * modification, are permitted provided that the following conditions 9 * are met: 10 * 1. Redistributions of source code must retain the above copyright 11 * notice, this list of conditions and the following disclaimer. 12 * 2. Redistributions in binary form must reproduce the above copyright 13 * notice, this list of conditions and the following disclaimer in the 14 * documentation and/or other materials provided with the distribution. 15 * 16 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR 17 * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES 18 * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. 19 * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, 20 * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT 21 * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, 22 * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY 23 * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT 24 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF 25 * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. 26 * 27 * $FreeBSD$ 28 */ 29 30 #ifndef _NET80211_IEEE80211_PHY_H_ 31 #define _NET80211_IEEE80211_PHY_H_ 32 33 #ifdef _KERNEL 34 /* 35 * IEEE 802.11 PHY-related definitions. 36 */ 37 38 /* 39 * Contention window (slots). 40 */ 41 #define IEEE80211_CW_MAX 1023 /* aCWmax */ 42 #define IEEE80211_CW_MIN_0 31 /* DS/CCK aCWmin, ERP aCWmin(0) */ 43 #define IEEE80211_CW_MIN_1 15 /* OFDM aCWmin, ERP aCWmin(1) */ 44 45 /* 46 * SIFS (microseconds). 47 */ 48 #define IEEE80211_DUR_SIFS 10 /* DS/CCK/ERP SIFS */ 49 #define IEEE80211_DUR_OFDM_SIFS 16 /* OFDM SIFS */ 50 51 /* 52 * Slot time (microseconds). 53 */ 54 #define IEEE80211_DUR_SLOT 20 /* DS/CCK slottime, ERP long slottime */ 55 #define IEEE80211_DUR_SHSLOT 9 /* ERP short slottime */ 56 #define IEEE80211_DUR_OFDM_SLOT 9 /* OFDM slottime */ 57 58 /* 59 * For drivers that don't implement per-VAP slot time 60 * (ie, they rely on net80211 figuring out the union 61 * between VAPs to program a single radio) - return 62 * the current radio configured slot time. 63 */ 64 #define IEEE80211_GET_SLOTTIME(ic) \ 65 ((ic->ic_flags & IEEE80211_F_SHSLOT) ? \ 66 IEEE80211_DUR_SHSLOT : IEEE80211_DUR_SLOT) 67 68 /* 69 * For drivers that implement per-VAP slot time; look 70 * at the per-VAP flags to determine whether this VAP 71 * is in short or long slot time. 72 */ 73 #define IEEE80211_VAP_GET_SLOTTIME(vap) \ 74 ((vap->iv_flags & IEEE80211_F_SHSLOT) ? \ 75 IEEE80211_DUR_SHSLOT : IEEE80211_DUR_SLOT) 76 77 /* 78 * DIFS (microseconds). 79 */ 80 #define IEEE80211_DUR_DIFS(sifs, slot) ((sifs) + 2 * (slot)) 81 82 struct ieee80211_channel; 83 84 #define IEEE80211_RATE_TABLE_SIZE 128 85 86 struct ieee80211_rate_table { 87 int rateCount; /* NB: for proper padding */ 88 uint8_t rateCodeToIndex[256]; /* back mapping */ 89 struct { 90 uint8_t phy; /* CCK/OFDM/TURBO */ 91 uint32_t rateKbps; /* transfer rate in kbs */ 92 uint8_t shortPreamble; /* mask for enabling short 93 * preamble in CCK rate code */ 94 uint8_t dot11Rate; /* value for supported rates 95 * info element of MLME */ 96 uint8_t ctlRateIndex; /* index of next lower basic 97 * rate; used for dur. calcs */ 98 uint16_t lpAckDuration; /* long preamble ACK dur. */ 99 uint16_t spAckDuration; /* short preamble ACK dur. */ 100 } info[IEEE80211_RATE_TABLE_SIZE]; 101 }; 102 103 const struct ieee80211_rate_table *ieee80211_get_ratetable( 104 struct ieee80211_channel *); 105 106 static __inline__ uint8_t 107 ieee80211_ack_rate(const struct ieee80211_rate_table *rt, uint8_t rate) 108 { 109 /* 110 * XXX Assert this is for a legacy rate; not for an MCS rate. 111 * If the caller wishes to use it for a basic rate, they should 112 * clear the high bit first. 113 */ 114 KASSERT(! (rate & 0x80), ("rate %d is basic/mcs?", rate)); 115 116 uint8_t cix = rt->info[rt->rateCodeToIndex[rate & IEEE80211_RATE_VAL]].ctlRateIndex; 117 KASSERT(cix != (uint8_t)-1, ("rate %d has no info", rate)); 118 return rt->info[cix].dot11Rate; 119 } 120 121 static __inline__ uint8_t 122 ieee80211_ctl_rate(const struct ieee80211_rate_table *rt, uint8_t rate) 123 { 124 /* 125 * XXX Assert this is for a legacy rate; not for an MCS rate. 126 * If the caller wishes to use it for a basic rate, they should 127 * clear the high bit first. 128 */ 129 KASSERT(! (rate & 0x80), ("rate %d is basic/mcs?", rate)); 130 131 uint8_t cix = rt->info[rt->rateCodeToIndex[rate & IEEE80211_RATE_VAL]].ctlRateIndex; 132 KASSERT(cix != (uint8_t)-1, ("rate %d has no info", rate)); 133 return rt->info[cix].dot11Rate; 134 } 135 136 static __inline__ enum ieee80211_phytype 137 ieee80211_rate2phytype(const struct ieee80211_rate_table *rt, uint8_t rate) 138 { 139 /* 140 * XXX Assert this is for a legacy rate; not for an MCS rate. 141 * If the caller wishes to use it for a basic rate, they should 142 * clear the high bit first. 143 */ 144 KASSERT(! (rate & 0x80), ("rate %d is basic/mcs?", rate)); 145 146 uint8_t rix = rt->rateCodeToIndex[rate & IEEE80211_RATE_VAL]; 147 KASSERT(rix != (uint8_t)-1, ("rate %d has no info", rate)); 148 return rt->info[rix].phy; 149 } 150 151 static __inline__ int 152 ieee80211_isratevalid(const struct ieee80211_rate_table *rt, uint8_t rate) 153 { 154 /* 155 * XXX Assert this is for a legacy rate; not for an MCS rate. 156 * If the caller wishes to use it for a basic rate, they should 157 * clear the high bit first. 158 */ 159 KASSERT(! (rate & 0x80), ("rate %d is basic/mcs?", rate)); 160 161 return rt->rateCodeToIndex[rate] != (uint8_t)-1; 162 } 163 164 /* 165 * Calculate ACK field for 166 * o non-fragment data frames 167 * o management frames 168 * sent using rate, phy and short preamble setting. 169 */ 170 static __inline__ uint16_t 171 ieee80211_ack_duration(const struct ieee80211_rate_table *rt, 172 uint8_t rate, int isShortPreamble) 173 { 174 uint8_t rix = rt->rateCodeToIndex[rate]; 175 176 KASSERT(rix != (uint8_t)-1, ("rate %d has no info", rate)); 177 if (isShortPreamble) { 178 KASSERT(rt->info[rix].spAckDuration != 0, 179 ("shpreamble ack dur is not computed!\n")); 180 return rt->info[rix].spAckDuration; 181 } else { 182 KASSERT(rt->info[rix].lpAckDuration != 0, 183 ("lgpreamble ack dur is not computed!\n")); 184 return rt->info[rix].lpAckDuration; 185 } 186 } 187 188 static __inline__ uint8_t 189 ieee80211_legacy_rate_lookup(const struct ieee80211_rate_table *rt, 190 uint8_t rate) 191 { 192 193 return (rt->rateCodeToIndex[rate & IEEE80211_RATE_VAL]); 194 } 195 196 /* 197 * Compute the time to transmit a frame of length frameLen bytes 198 * using the specified 802.11 rate code, phy, and short preamble 199 * setting. 200 * 201 * NB: SIFS is included. 202 */ 203 uint16_t ieee80211_compute_duration(const struct ieee80211_rate_table *, 204 uint32_t frameLen, uint16_t rate, int isShortPreamble); 205 /* 206 * Convert PLCP signal/rate field to 802.11 rate code (.5Mbits/s) 207 */ 208 uint8_t ieee80211_plcp2rate(uint8_t, enum ieee80211_phytype); 209 /* 210 * Convert 802.11 rate code to PLCP signal. 211 */ 212 uint8_t ieee80211_rate2plcp(int, enum ieee80211_phytype); 213 214 /* 215 * 802.11n rate manipulation. 216 */ 217 218 #define IEEE80211_HT_RC_2_MCS(_rc) ((_rc) & 0x1f) 219 #define IEEE80211_HT_RC_2_STREAMS(_rc) ((((_rc) & 0x78) >> 3) + 1) 220 #define IEEE80211_IS_HT_RATE(_rc) ( (_rc) & IEEE80211_RATE_MCS) 221 222 uint32_t ieee80211_compute_duration_ht(uint32_t frameLen, 223 uint16_t rate, int streams, int isht40, 224 int isShortGI); 225 226 #endif /* _KERNEL */ 227 #endif /* !_NET80211_IEEE80211_PHY_H_ */ 228