1 /*- 2 * Copyright (c) 2001 Atsushi Onoe 3 * Copyright (c) 2002-2009 Sam Leffler, Errno Consulting 4 * All rights reserved. 5 * 6 * Redistribution and use in source and binary forms, with or without 7 * modification, are permitted provided that the following conditions 8 * are met: 9 * 1. Redistributions of source code must retain the above copyright 10 * notice, this list of conditions and the following disclaimer. 11 * 2. Redistributions in binary form must reproduce the above copyright 12 * notice, this list of conditions and the following disclaimer in the 13 * documentation and/or other materials provided with the distribution. 14 * 15 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR 16 * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES 17 * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. 18 * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, 19 * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT 20 * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, 21 * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY 22 * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT 23 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF 24 * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. 25 */ 26 27 #include <sys/cdefs.h> 28 __FBSDID("$FreeBSD$"); 29 30 #include "opt_inet.h" 31 #include "opt_inet6.h" 32 #include "opt_wlan.h" 33 34 #include <sys/param.h> 35 #include <sys/systm.h> 36 #include <sys/mbuf.h> 37 #include <sys/kernel.h> 38 #include <sys/endian.h> 39 40 #include <sys/socket.h> 41 42 #include <net/bpf.h> 43 #include <net/ethernet.h> 44 #include <net/if.h> 45 #include <net/if_llc.h> 46 #include <net/if_media.h> 47 #include <net/if_vlan_var.h> 48 49 #include <net80211/ieee80211_var.h> 50 #include <net80211/ieee80211_regdomain.h> 51 #ifdef IEEE80211_SUPPORT_SUPERG 52 #include <net80211/ieee80211_superg.h> 53 #endif 54 #ifdef IEEE80211_SUPPORT_TDMA 55 #include <net80211/ieee80211_tdma.h> 56 #endif 57 #include <net80211/ieee80211_wds.h> 58 #include <net80211/ieee80211_mesh.h> 59 60 #if defined(INET) || defined(INET6) 61 #include <netinet/in.h> 62 #endif 63 64 #ifdef INET 65 #include <netinet/if_ether.h> 66 #include <netinet/in_systm.h> 67 #include <netinet/ip.h> 68 #endif 69 #ifdef INET6 70 #include <netinet/ip6.h> 71 #endif 72 73 #include <security/mac/mac_framework.h> 74 75 #define ETHER_HEADER_COPY(dst, src) \ 76 memcpy(dst, src, sizeof(struct ether_header)) 77 78 /* unalligned little endian access */ 79 #define LE_WRITE_2(p, v) do { \ 80 ((uint8_t *)(p))[0] = (v) & 0xff; \ 81 ((uint8_t *)(p))[1] = ((v) >> 8) & 0xff; \ 82 } while (0) 83 #define LE_WRITE_4(p, v) do { \ 84 ((uint8_t *)(p))[0] = (v) & 0xff; \ 85 ((uint8_t *)(p))[1] = ((v) >> 8) & 0xff; \ 86 ((uint8_t *)(p))[2] = ((v) >> 16) & 0xff; \ 87 ((uint8_t *)(p))[3] = ((v) >> 24) & 0xff; \ 88 } while (0) 89 90 static int ieee80211_fragment(struct ieee80211vap *, struct mbuf *, 91 u_int hdrsize, u_int ciphdrsize, u_int mtu); 92 static void ieee80211_tx_mgt_cb(struct ieee80211_node *, void *, int); 93 94 #ifdef IEEE80211_DEBUG 95 /* 96 * Decide if an outbound management frame should be 97 * printed when debugging is enabled. This filters some 98 * of the less interesting frames that come frequently 99 * (e.g. beacons). 100 */ 101 static __inline int 102 doprint(struct ieee80211vap *vap, int subtype) 103 { 104 switch (subtype) { 105 case IEEE80211_FC0_SUBTYPE_PROBE_RESP: 106 return (vap->iv_opmode == IEEE80211_M_IBSS); 107 } 108 return 1; 109 } 110 #endif 111 112 /* 113 * Start method for vap's. All packets from the stack come 114 * through here. We handle common processing of the packets 115 * before dispatching them to the underlying device. 116 */ 117 void 118 ieee80211_start(struct ifnet *ifp) 119 { 120 #define IS_DWDS(vap) \ 121 (vap->iv_opmode == IEEE80211_M_WDS && \ 122 (vap->iv_flags_ext & IEEE80211_FEXT_WDSLEGACY) == 0) 123 struct ieee80211vap *vap = ifp->if_softc; 124 struct ieee80211com *ic = vap->iv_ic; 125 struct ifnet *parent = ic->ic_ifp; 126 struct ieee80211_node *ni; 127 struct mbuf *m; 128 struct ether_header *eh; 129 int error; 130 131 /* NB: parent must be up and running */ 132 if (!IFNET_IS_UP_RUNNING(parent)) { 133 IEEE80211_DPRINTF(vap, IEEE80211_MSG_OUTPUT, 134 "%s: ignore queue, parent %s not up+running\n", 135 __func__, parent->if_xname); 136 /* XXX stat */ 137 return; 138 } 139 if (vap->iv_state == IEEE80211_S_SLEEP) { 140 /* 141 * In power save, wakeup device for transmit. 142 */ 143 ieee80211_new_state(vap, IEEE80211_S_RUN, 0); 144 return; 145 } 146 /* 147 * No data frames go out unless we're running. 148 * Note in particular this covers CAC and CSA 149 * states (though maybe we should check muting 150 * for CSA). 151 */ 152 if (vap->iv_state != IEEE80211_S_RUN) { 153 IEEE80211_LOCK(ic); 154 /* re-check under the com lock to avoid races */ 155 if (vap->iv_state != IEEE80211_S_RUN) { 156 IEEE80211_DPRINTF(vap, IEEE80211_MSG_OUTPUT, 157 "%s: ignore queue, in %s state\n", 158 __func__, ieee80211_state_name[vap->iv_state]); 159 vap->iv_stats.is_tx_badstate++; 160 IEEE80211_UNLOCK(ic); 161 IFQ_LOCK(&ifp->if_snd); 162 ifp->if_drv_flags |= IFF_DRV_OACTIVE; 163 IFQ_UNLOCK(&ifp->if_snd); 164 return; 165 } 166 IEEE80211_UNLOCK(ic); 167 } 168 for (;;) { 169 IFQ_DEQUEUE(&ifp->if_snd, m); 170 if (m == NULL) 171 break; 172 /* 173 * Sanitize mbuf flags for net80211 use. We cannot 174 * clear M_PWR_SAV or M_MORE_DATA because these may 175 * be set for frames that are re-submitted from the 176 * power save queue. 177 * 178 * NB: This must be done before ieee80211_classify as 179 * it marks EAPOL in frames with M_EAPOL. 180 */ 181 m->m_flags &= ~(M_80211_TX - M_PWR_SAV - M_MORE_DATA); 182 /* 183 * Cancel any background scan. 184 */ 185 if (ic->ic_flags & IEEE80211_F_SCAN) 186 ieee80211_cancel_anyscan(vap); 187 /* 188 * Find the node for the destination so we can do 189 * things like power save and fast frames aggregation. 190 * 191 * NB: past this point various code assumes the first 192 * mbuf has the 802.3 header present (and contiguous). 193 */ 194 ni = NULL; 195 if (m->m_len < sizeof(struct ether_header) && 196 (m = m_pullup(m, sizeof(struct ether_header))) == NULL) { 197 IEEE80211_DPRINTF(vap, IEEE80211_MSG_OUTPUT, 198 "discard frame, %s\n", "m_pullup failed"); 199 vap->iv_stats.is_tx_nobuf++; /* XXX */ 200 ifp->if_oerrors++; 201 continue; 202 } 203 eh = mtod(m, struct ether_header *); 204 if (ETHER_IS_MULTICAST(eh->ether_dhost)) { 205 if (IS_DWDS(vap)) { 206 /* 207 * Only unicast frames from the above go out 208 * DWDS vaps; multicast frames are handled by 209 * dispatching the frame as it comes through 210 * the AP vap (see below). 211 */ 212 IEEE80211_DISCARD_MAC(vap, IEEE80211_MSG_WDS, 213 eh->ether_dhost, "mcast", "%s", "on DWDS"); 214 vap->iv_stats.is_dwds_mcast++; 215 m_freem(m); 216 continue; 217 } 218 if (vap->iv_opmode == IEEE80211_M_HOSTAP) { 219 /* 220 * Spam DWDS vap's w/ multicast traffic. 221 */ 222 /* XXX only if dwds in use? */ 223 ieee80211_dwds_mcast(vap, m); 224 } 225 } 226 #ifdef IEEE80211_SUPPORT_MESH 227 if (vap->iv_opmode != IEEE80211_M_MBSS) { 228 #endif 229 ni = ieee80211_find_txnode(vap, eh->ether_dhost); 230 if (ni == NULL) { 231 /* NB: ieee80211_find_txnode does stat+msg */ 232 ifp->if_oerrors++; 233 m_freem(m); 234 continue; 235 } 236 if (ni->ni_associd == 0 && 237 (ni->ni_flags & IEEE80211_NODE_ASSOCID)) { 238 IEEE80211_DISCARD_MAC(vap, IEEE80211_MSG_OUTPUT, 239 eh->ether_dhost, NULL, 240 "sta not associated (type 0x%04x)", 241 htons(eh->ether_type)); 242 vap->iv_stats.is_tx_notassoc++; 243 ifp->if_oerrors++; 244 m_freem(m); 245 ieee80211_free_node(ni); 246 continue; 247 } 248 #ifdef IEEE80211_SUPPORT_MESH 249 } else { 250 if (!IEEE80211_ADDR_EQ(eh->ether_shost, vap->iv_myaddr)) { 251 /* 252 * Proxy station only if configured. 253 */ 254 if (!ieee80211_mesh_isproxyena(vap)) { 255 IEEE80211_DISCARD_MAC(vap, 256 IEEE80211_MSG_OUTPUT | 257 IEEE80211_MSG_MESH, 258 eh->ether_dhost, NULL, 259 "%s", "proxy not enabled"); 260 vap->iv_stats.is_mesh_notproxy++; 261 ifp->if_oerrors++; 262 m_freem(m); 263 continue; 264 } 265 IEEE80211_DPRINTF(vap, IEEE80211_MSG_OUTPUT, 266 "forward frame from DS SA(%6D), DA(%6D)\n", 267 eh->ether_shost, ":", 268 eh->ether_dhost, ":"); 269 ieee80211_mesh_proxy_check(vap, eh->ether_shost); 270 } 271 ni = ieee80211_mesh_discover(vap, eh->ether_dhost, m); 272 if (ni == NULL) { 273 /* 274 * NB: ieee80211_mesh_discover holds/disposes 275 * frame (e.g. queueing on path discovery). 276 */ 277 ifp->if_oerrors++; 278 continue; 279 } 280 } 281 #endif 282 if ((ni->ni_flags & IEEE80211_NODE_PWR_MGT) && 283 (m->m_flags & M_PWR_SAV) == 0) { 284 /* 285 * Station in power save mode; pass the frame 286 * to the 802.11 layer and continue. We'll get 287 * the frame back when the time is right. 288 * XXX lose WDS vap linkage? 289 */ 290 (void) ieee80211_pwrsave(ni, m); 291 ieee80211_free_node(ni); 292 continue; 293 } 294 /* calculate priority so drivers can find the tx queue */ 295 if (ieee80211_classify(ni, m)) { 296 IEEE80211_DISCARD_MAC(vap, IEEE80211_MSG_OUTPUT, 297 eh->ether_dhost, NULL, 298 "%s", "classification failure"); 299 vap->iv_stats.is_tx_classify++; 300 ifp->if_oerrors++; 301 m_freem(m); 302 ieee80211_free_node(ni); 303 continue; 304 } 305 /* 306 * Stash the node pointer. Note that we do this after 307 * any call to ieee80211_dwds_mcast because that code 308 * uses any existing value for rcvif to identify the 309 * interface it (might have been) received on. 310 */ 311 m->m_pkthdr.rcvif = (void *)ni; 312 313 BPF_MTAP(ifp, m); /* 802.3 tx */ 314 315 /* 316 * Check if A-MPDU tx aggregation is setup or if we 317 * should try to enable it. The sta must be associated 318 * with HT and A-MPDU enabled for use. When the policy 319 * routine decides we should enable A-MPDU we issue an 320 * ADDBA request and wait for a reply. The frame being 321 * encapsulated will go out w/o using A-MPDU, or possibly 322 * it might be collected by the driver and held/retransmit. 323 * The default ic_ampdu_enable routine handles staggering 324 * ADDBA requests in case the receiver NAK's us or we are 325 * otherwise unable to establish a BA stream. 326 */ 327 if ((ni->ni_flags & IEEE80211_NODE_AMPDU_TX) && 328 (vap->iv_flags_ht & IEEE80211_FHT_AMPDU_TX) && 329 (m->m_flags & M_EAPOL) == 0) { 330 int tid = WME_AC_TO_TID(M_WME_GETAC(m)); 331 struct ieee80211_tx_ampdu *tap = &ni->ni_tx_ampdu[tid]; 332 333 ieee80211_txampdu_count_packet(tap); 334 if (IEEE80211_AMPDU_RUNNING(tap)) { 335 /* 336 * Operational, mark frame for aggregation. 337 * 338 * XXX do tx aggregation here 339 */ 340 m->m_flags |= M_AMPDU_MPDU; 341 } else if (!IEEE80211_AMPDU_REQUESTED(tap) && 342 ic->ic_ampdu_enable(ni, tap)) { 343 /* 344 * Not negotiated yet, request service. 345 */ 346 ieee80211_ampdu_request(ni, tap); 347 /* XXX hold frame for reply? */ 348 } 349 } 350 #ifdef IEEE80211_SUPPORT_SUPERG 351 else if (IEEE80211_ATH_CAP(vap, ni, IEEE80211_NODE_FF)) { 352 m = ieee80211_ff_check(ni, m); 353 if (m == NULL) { 354 /* NB: any ni ref held on stageq */ 355 continue; 356 } 357 } 358 #endif /* IEEE80211_SUPPORT_SUPERG */ 359 if (__predict_true((vap->iv_caps & IEEE80211_C_8023ENCAP) == 0)) { 360 /* 361 * Encapsulate the packet in prep for transmission. 362 */ 363 m = ieee80211_encap(vap, ni, m); 364 if (m == NULL) { 365 /* NB: stat+msg handled in ieee80211_encap */ 366 ieee80211_free_node(ni); 367 continue; 368 } 369 } 370 error = parent->if_transmit(parent, m); 371 if (error != 0) { 372 /* NB: IFQ_HANDOFF reclaims mbuf */ 373 ieee80211_free_node(ni); 374 } else { 375 ifp->if_opackets++; 376 } 377 ic->ic_lastdata = ticks; 378 } 379 #undef IS_DWDS 380 } 381 382 /* 383 * 802.11 output routine. This is (currently) used only to 384 * connect bpf write calls to the 802.11 layer for injecting 385 * raw 802.11 frames. 386 */ 387 int 388 ieee80211_output(struct ifnet *ifp, struct mbuf *m, 389 struct sockaddr *dst, struct route *ro) 390 { 391 #define senderr(e) do { error = (e); goto bad;} while (0) 392 struct ieee80211_node *ni = NULL; 393 struct ieee80211vap *vap; 394 struct ieee80211_frame *wh; 395 int error; 396 397 IFQ_LOCK(&ifp->if_snd); 398 if (ifp->if_drv_flags & IFF_DRV_OACTIVE) { 399 IFQ_UNLOCK(&ifp->if_snd); 400 /* 401 * Short-circuit requests if the vap is marked OACTIVE 402 * as this can happen because a packet came down through 403 * ieee80211_start before the vap entered RUN state in 404 * which case it's ok to just drop the frame. This 405 * should not be necessary but callers of if_output don't 406 * check OACTIVE. 407 */ 408 senderr(ENETDOWN); 409 } 410 IFQ_UNLOCK(&ifp->if_snd); 411 vap = ifp->if_softc; 412 /* 413 * Hand to the 802.3 code if not tagged as 414 * a raw 802.11 frame. 415 */ 416 if (dst->sa_family != AF_IEEE80211) 417 return vap->iv_output(ifp, m, dst, ro); 418 #ifdef MAC 419 error = mac_ifnet_check_transmit(ifp, m); 420 if (error) 421 senderr(error); 422 #endif 423 if (ifp->if_flags & IFF_MONITOR) 424 senderr(ENETDOWN); 425 if (!IFNET_IS_UP_RUNNING(ifp)) 426 senderr(ENETDOWN); 427 if (vap->iv_state == IEEE80211_S_CAC) { 428 IEEE80211_DPRINTF(vap, 429 IEEE80211_MSG_OUTPUT | IEEE80211_MSG_DOTH, 430 "block %s frame in CAC state\n", "raw data"); 431 vap->iv_stats.is_tx_badstate++; 432 senderr(EIO); /* XXX */ 433 } else if (vap->iv_state == IEEE80211_S_SCAN) 434 senderr(EIO); 435 /* XXX bypass bridge, pfil, carp, etc. */ 436 437 if (m->m_pkthdr.len < sizeof(struct ieee80211_frame_ack)) 438 senderr(EIO); /* XXX */ 439 wh = mtod(m, struct ieee80211_frame *); 440 if ((wh->i_fc[0] & IEEE80211_FC0_VERSION_MASK) != 441 IEEE80211_FC0_VERSION_0) 442 senderr(EIO); /* XXX */ 443 444 /* locate destination node */ 445 switch (wh->i_fc[1] & IEEE80211_FC1_DIR_MASK) { 446 case IEEE80211_FC1_DIR_NODS: 447 case IEEE80211_FC1_DIR_FROMDS: 448 ni = ieee80211_find_txnode(vap, wh->i_addr1); 449 break; 450 case IEEE80211_FC1_DIR_TODS: 451 case IEEE80211_FC1_DIR_DSTODS: 452 if (m->m_pkthdr.len < sizeof(struct ieee80211_frame)) 453 senderr(EIO); /* XXX */ 454 ni = ieee80211_find_txnode(vap, wh->i_addr3); 455 break; 456 default: 457 senderr(EIO); /* XXX */ 458 } 459 if (ni == NULL) { 460 /* 461 * Permit packets w/ bpf params through regardless 462 * (see below about sa_len). 463 */ 464 if (dst->sa_len == 0) 465 senderr(EHOSTUNREACH); 466 ni = ieee80211_ref_node(vap->iv_bss); 467 } 468 469 /* 470 * Sanitize mbuf for net80211 flags leaked from above. 471 * 472 * NB: This must be done before ieee80211_classify as 473 * it marks EAPOL in frames with M_EAPOL. 474 */ 475 m->m_flags &= ~M_80211_TX; 476 477 /* calculate priority so drivers can find the tx queue */ 478 /* XXX assumes an 802.3 frame */ 479 if (ieee80211_classify(ni, m)) 480 senderr(EIO); /* XXX */ 481 482 ifp->if_opackets++; 483 IEEE80211_NODE_STAT(ni, tx_data); 484 if (IEEE80211_IS_MULTICAST(wh->i_addr1)) { 485 IEEE80211_NODE_STAT(ni, tx_mcast); 486 m->m_flags |= M_MCAST; 487 } else 488 IEEE80211_NODE_STAT(ni, tx_ucast); 489 /* NB: ieee80211_encap does not include 802.11 header */ 490 IEEE80211_NODE_STAT_ADD(ni, tx_bytes, m->m_pkthdr.len); 491 492 /* 493 * NB: DLT_IEEE802_11_RADIO identifies the parameters are 494 * present by setting the sa_len field of the sockaddr (yes, 495 * this is a hack). 496 * NB: we assume sa_data is suitably aligned to cast. 497 */ 498 return vap->iv_ic->ic_raw_xmit(ni, m, 499 (const struct ieee80211_bpf_params *)(dst->sa_len ? 500 dst->sa_data : NULL)); 501 bad: 502 if (m != NULL) 503 m_freem(m); 504 if (ni != NULL) 505 ieee80211_free_node(ni); 506 ifp->if_oerrors++; 507 return error; 508 #undef senderr 509 } 510 511 /* 512 * Set the direction field and address fields of an outgoing 513 * frame. Note this should be called early on in constructing 514 * a frame as it sets i_fc[1]; other bits can then be or'd in. 515 */ 516 void 517 ieee80211_send_setup( 518 struct ieee80211_node *ni, 519 struct mbuf *m, 520 int type, int tid, 521 const uint8_t sa[IEEE80211_ADDR_LEN], 522 const uint8_t da[IEEE80211_ADDR_LEN], 523 const uint8_t bssid[IEEE80211_ADDR_LEN]) 524 { 525 #define WH4(wh) ((struct ieee80211_frame_addr4 *)wh) 526 struct ieee80211vap *vap = ni->ni_vap; 527 struct ieee80211_tx_ampdu *tap; 528 struct ieee80211_frame *wh = mtod(m, struct ieee80211_frame *); 529 ieee80211_seq seqno; 530 531 wh->i_fc[0] = IEEE80211_FC0_VERSION_0 | type; 532 if ((type & IEEE80211_FC0_TYPE_MASK) == IEEE80211_FC0_TYPE_DATA) { 533 switch (vap->iv_opmode) { 534 case IEEE80211_M_STA: 535 wh->i_fc[1] = IEEE80211_FC1_DIR_TODS; 536 IEEE80211_ADDR_COPY(wh->i_addr1, bssid); 537 IEEE80211_ADDR_COPY(wh->i_addr2, sa); 538 IEEE80211_ADDR_COPY(wh->i_addr3, da); 539 break; 540 case IEEE80211_M_IBSS: 541 case IEEE80211_M_AHDEMO: 542 wh->i_fc[1] = IEEE80211_FC1_DIR_NODS; 543 IEEE80211_ADDR_COPY(wh->i_addr1, da); 544 IEEE80211_ADDR_COPY(wh->i_addr2, sa); 545 IEEE80211_ADDR_COPY(wh->i_addr3, bssid); 546 break; 547 case IEEE80211_M_HOSTAP: 548 wh->i_fc[1] = IEEE80211_FC1_DIR_FROMDS; 549 IEEE80211_ADDR_COPY(wh->i_addr1, da); 550 IEEE80211_ADDR_COPY(wh->i_addr2, bssid); 551 IEEE80211_ADDR_COPY(wh->i_addr3, sa); 552 break; 553 case IEEE80211_M_WDS: 554 wh->i_fc[1] = IEEE80211_FC1_DIR_DSTODS; 555 IEEE80211_ADDR_COPY(wh->i_addr1, da); 556 IEEE80211_ADDR_COPY(wh->i_addr2, vap->iv_myaddr); 557 IEEE80211_ADDR_COPY(wh->i_addr3, da); 558 IEEE80211_ADDR_COPY(WH4(wh)->i_addr4, sa); 559 break; 560 case IEEE80211_M_MBSS: 561 #ifdef IEEE80211_SUPPORT_MESH 562 if (IEEE80211_IS_MULTICAST(da)) { 563 wh->i_fc[1] = IEEE80211_FC1_DIR_FROMDS; 564 /* XXX next hop */ 565 IEEE80211_ADDR_COPY(wh->i_addr1, da); 566 IEEE80211_ADDR_COPY(wh->i_addr2, 567 vap->iv_myaddr); 568 } else { 569 wh->i_fc[1] = IEEE80211_FC1_DIR_DSTODS; 570 IEEE80211_ADDR_COPY(wh->i_addr1, da); 571 IEEE80211_ADDR_COPY(wh->i_addr2, 572 vap->iv_myaddr); 573 IEEE80211_ADDR_COPY(wh->i_addr3, da); 574 IEEE80211_ADDR_COPY(WH4(wh)->i_addr4, sa); 575 } 576 #endif 577 break; 578 case IEEE80211_M_MONITOR: /* NB: to quiet compiler */ 579 break; 580 } 581 } else { 582 wh->i_fc[1] = IEEE80211_FC1_DIR_NODS; 583 IEEE80211_ADDR_COPY(wh->i_addr1, da); 584 IEEE80211_ADDR_COPY(wh->i_addr2, sa); 585 #ifdef IEEE80211_SUPPORT_MESH 586 if (vap->iv_opmode == IEEE80211_M_MBSS) 587 IEEE80211_ADDR_COPY(wh->i_addr3, sa); 588 else 589 #endif 590 IEEE80211_ADDR_COPY(wh->i_addr3, bssid); 591 } 592 *(uint16_t *)&wh->i_dur[0] = 0; 593 594 tap = &ni->ni_tx_ampdu[tid]; 595 if (tid != IEEE80211_NONQOS_TID && IEEE80211_AMPDU_RUNNING(tap)) 596 m->m_flags |= M_AMPDU_MPDU; 597 else { 598 seqno = ni->ni_txseqs[tid]++; 599 *(uint16_t *)&wh->i_seq[0] = 600 htole16(seqno << IEEE80211_SEQ_SEQ_SHIFT); 601 M_SEQNO_SET(m, seqno); 602 } 603 604 if (IEEE80211_IS_MULTICAST(wh->i_addr1)) 605 m->m_flags |= M_MCAST; 606 #undef WH4 607 } 608 609 /* 610 * Send a management frame to the specified node. The node pointer 611 * must have a reference as the pointer will be passed to the driver 612 * and potentially held for a long time. If the frame is successfully 613 * dispatched to the driver, then it is responsible for freeing the 614 * reference (and potentially free'ing up any associated storage); 615 * otherwise deal with reclaiming any reference (on error). 616 */ 617 int 618 ieee80211_mgmt_output(struct ieee80211_node *ni, struct mbuf *m, int type, 619 struct ieee80211_bpf_params *params) 620 { 621 struct ieee80211vap *vap = ni->ni_vap; 622 struct ieee80211com *ic = ni->ni_ic; 623 struct ieee80211_frame *wh; 624 625 KASSERT(ni != NULL, ("null node")); 626 627 if (vap->iv_state == IEEE80211_S_CAC) { 628 IEEE80211_NOTE(vap, IEEE80211_MSG_OUTPUT | IEEE80211_MSG_DOTH, 629 ni, "block %s frame in CAC state", 630 ieee80211_mgt_subtype_name[ 631 (type & IEEE80211_FC0_SUBTYPE_MASK) >> 632 IEEE80211_FC0_SUBTYPE_SHIFT]); 633 vap->iv_stats.is_tx_badstate++; 634 ieee80211_free_node(ni); 635 m_freem(m); 636 return EIO; /* XXX */ 637 } 638 639 M_PREPEND(m, sizeof(struct ieee80211_frame), M_NOWAIT); 640 if (m == NULL) { 641 ieee80211_free_node(ni); 642 return ENOMEM; 643 } 644 645 wh = mtod(m, struct ieee80211_frame *); 646 ieee80211_send_setup(ni, m, 647 IEEE80211_FC0_TYPE_MGT | type, IEEE80211_NONQOS_TID, 648 vap->iv_myaddr, ni->ni_macaddr, ni->ni_bssid); 649 if (params->ibp_flags & IEEE80211_BPF_CRYPTO) { 650 IEEE80211_NOTE_MAC(vap, IEEE80211_MSG_AUTH, wh->i_addr1, 651 "encrypting frame (%s)", __func__); 652 wh->i_fc[1] |= IEEE80211_FC1_WEP; 653 } 654 m->m_flags |= M_ENCAP; /* mark encapsulated */ 655 656 KASSERT(type != IEEE80211_FC0_SUBTYPE_PROBE_RESP, ("probe response?")); 657 M_WME_SETAC(m, params->ibp_pri); 658 659 #ifdef IEEE80211_DEBUG 660 /* avoid printing too many frames */ 661 if ((ieee80211_msg_debug(vap) && doprint(vap, type)) || 662 ieee80211_msg_dumppkts(vap)) { 663 printf("[%s] send %s on channel %u\n", 664 ether_sprintf(wh->i_addr1), 665 ieee80211_mgt_subtype_name[ 666 (type & IEEE80211_FC0_SUBTYPE_MASK) >> 667 IEEE80211_FC0_SUBTYPE_SHIFT], 668 ieee80211_chan2ieee(ic, ic->ic_curchan)); 669 } 670 #endif 671 IEEE80211_NODE_STAT(ni, tx_mgmt); 672 673 return ic->ic_raw_xmit(ni, m, params); 674 } 675 676 /* 677 * Send a null data frame to the specified node. If the station 678 * is setup for QoS then a QoS Null Data frame is constructed. 679 * If this is a WDS station then a 4-address frame is constructed. 680 * 681 * NB: the caller is assumed to have setup a node reference 682 * for use; this is necessary to deal with a race condition 683 * when probing for inactive stations. Like ieee80211_mgmt_output 684 * we must cleanup any node reference on error; however we 685 * can safely just unref it as we know it will never be the 686 * last reference to the node. 687 */ 688 int 689 ieee80211_send_nulldata(struct ieee80211_node *ni) 690 { 691 struct ieee80211vap *vap = ni->ni_vap; 692 struct ieee80211com *ic = ni->ni_ic; 693 struct mbuf *m; 694 struct ieee80211_frame *wh; 695 int hdrlen; 696 uint8_t *frm; 697 698 if (vap->iv_state == IEEE80211_S_CAC) { 699 IEEE80211_NOTE(vap, IEEE80211_MSG_OUTPUT | IEEE80211_MSG_DOTH, 700 ni, "block %s frame in CAC state", "null data"); 701 ieee80211_unref_node(&ni); 702 vap->iv_stats.is_tx_badstate++; 703 return EIO; /* XXX */ 704 } 705 706 if (ni->ni_flags & (IEEE80211_NODE_QOS|IEEE80211_NODE_HT)) 707 hdrlen = sizeof(struct ieee80211_qosframe); 708 else 709 hdrlen = sizeof(struct ieee80211_frame); 710 /* NB: only WDS vap's get 4-address frames */ 711 if (vap->iv_opmode == IEEE80211_M_WDS) 712 hdrlen += IEEE80211_ADDR_LEN; 713 if (ic->ic_flags & IEEE80211_F_DATAPAD) 714 hdrlen = roundup(hdrlen, sizeof(uint32_t)); 715 716 m = ieee80211_getmgtframe(&frm, ic->ic_headroom + hdrlen, 0); 717 if (m == NULL) { 718 /* XXX debug msg */ 719 ieee80211_unref_node(&ni); 720 vap->iv_stats.is_tx_nobuf++; 721 return ENOMEM; 722 } 723 KASSERT(M_LEADINGSPACE(m) >= hdrlen, 724 ("leading space %zd", M_LEADINGSPACE(m))); 725 M_PREPEND(m, hdrlen, M_NOWAIT); 726 if (m == NULL) { 727 /* NB: cannot happen */ 728 ieee80211_free_node(ni); 729 return ENOMEM; 730 } 731 732 wh = mtod(m, struct ieee80211_frame *); /* NB: a little lie */ 733 if (ni->ni_flags & IEEE80211_NODE_QOS) { 734 const int tid = WME_AC_TO_TID(WME_AC_BE); 735 uint8_t *qos; 736 737 ieee80211_send_setup(ni, m, 738 IEEE80211_FC0_TYPE_DATA | IEEE80211_FC0_SUBTYPE_QOS_NULL, 739 tid, vap->iv_myaddr, ni->ni_macaddr, ni->ni_bssid); 740 741 if (vap->iv_opmode == IEEE80211_M_WDS) 742 qos = ((struct ieee80211_qosframe_addr4 *) wh)->i_qos; 743 else 744 qos = ((struct ieee80211_qosframe *) wh)->i_qos; 745 qos[0] = tid & IEEE80211_QOS_TID; 746 if (ic->ic_wme.wme_wmeChanParams.cap_wmeParams[WME_AC_BE].wmep_noackPolicy) 747 qos[0] |= IEEE80211_QOS_ACKPOLICY_NOACK; 748 qos[1] = 0; 749 } else { 750 ieee80211_send_setup(ni, m, 751 IEEE80211_FC0_TYPE_DATA | IEEE80211_FC0_SUBTYPE_NODATA, 752 IEEE80211_NONQOS_TID, 753 vap->iv_myaddr, ni->ni_macaddr, ni->ni_bssid); 754 } 755 if (vap->iv_opmode != IEEE80211_M_WDS) { 756 /* NB: power management bit is never sent by an AP */ 757 if ((ni->ni_flags & IEEE80211_NODE_PWR_MGT) && 758 vap->iv_opmode != IEEE80211_M_HOSTAP) 759 wh->i_fc[1] |= IEEE80211_FC1_PWR_MGT; 760 } 761 m->m_len = m->m_pkthdr.len = hdrlen; 762 m->m_flags |= M_ENCAP; /* mark encapsulated */ 763 764 M_WME_SETAC(m, WME_AC_BE); 765 766 IEEE80211_NODE_STAT(ni, tx_data); 767 768 IEEE80211_NOTE(vap, IEEE80211_MSG_DEBUG | IEEE80211_MSG_DUMPPKTS, ni, 769 "send %snull data frame on channel %u, pwr mgt %s", 770 ni->ni_flags & IEEE80211_NODE_QOS ? "QoS " : "", 771 ieee80211_chan2ieee(ic, ic->ic_curchan), 772 wh->i_fc[1] & IEEE80211_FC1_PWR_MGT ? "ena" : "dis"); 773 774 return ic->ic_raw_xmit(ni, m, NULL); 775 } 776 777 /* 778 * Assign priority to a frame based on any vlan tag assigned 779 * to the station and/or any Diffserv setting in an IP header. 780 * Finally, if an ACM policy is setup (in station mode) it's 781 * applied. 782 */ 783 int 784 ieee80211_classify(struct ieee80211_node *ni, struct mbuf *m) 785 { 786 const struct ether_header *eh = mtod(m, struct ether_header *); 787 int v_wme_ac, d_wme_ac, ac; 788 789 /* 790 * Always promote PAE/EAPOL frames to high priority. 791 */ 792 if (eh->ether_type == htons(ETHERTYPE_PAE)) { 793 /* NB: mark so others don't need to check header */ 794 m->m_flags |= M_EAPOL; 795 ac = WME_AC_VO; 796 goto done; 797 } 798 /* 799 * Non-qos traffic goes to BE. 800 */ 801 if ((ni->ni_flags & IEEE80211_NODE_QOS) == 0) { 802 ac = WME_AC_BE; 803 goto done; 804 } 805 806 /* 807 * If node has a vlan tag then all traffic 808 * to it must have a matching tag. 809 */ 810 v_wme_ac = 0; 811 if (ni->ni_vlan != 0) { 812 if ((m->m_flags & M_VLANTAG) == 0) { 813 IEEE80211_NODE_STAT(ni, tx_novlantag); 814 return 1; 815 } 816 if (EVL_VLANOFTAG(m->m_pkthdr.ether_vtag) != 817 EVL_VLANOFTAG(ni->ni_vlan)) { 818 IEEE80211_NODE_STAT(ni, tx_vlanmismatch); 819 return 1; 820 } 821 /* map vlan priority to AC */ 822 v_wme_ac = TID_TO_WME_AC(EVL_PRIOFTAG(ni->ni_vlan)); 823 } 824 825 /* XXX m_copydata may be too slow for fast path */ 826 #ifdef INET 827 if (eh->ether_type == htons(ETHERTYPE_IP)) { 828 uint8_t tos; 829 /* 830 * IP frame, map the DSCP bits from the TOS field. 831 */ 832 /* NB: ip header may not be in first mbuf */ 833 m_copydata(m, sizeof(struct ether_header) + 834 offsetof(struct ip, ip_tos), sizeof(tos), &tos); 835 tos >>= 5; /* NB: ECN + low 3 bits of DSCP */ 836 d_wme_ac = TID_TO_WME_AC(tos); 837 } else { 838 #endif /* INET */ 839 #ifdef INET6 840 if (eh->ether_type == htons(ETHERTYPE_IPV6)) { 841 uint32_t flow; 842 uint8_t tos; 843 /* 844 * IPv6 frame, map the DSCP bits from the traffic class field. 845 */ 846 m_copydata(m, sizeof(struct ether_header) + 847 offsetof(struct ip6_hdr, ip6_flow), sizeof(flow), 848 (caddr_t) &flow); 849 tos = (uint8_t)(ntohl(flow) >> 20); 850 tos >>= 5; /* NB: ECN + low 3 bits of DSCP */ 851 d_wme_ac = TID_TO_WME_AC(tos); 852 } else { 853 #endif /* INET6 */ 854 d_wme_ac = WME_AC_BE; 855 #ifdef INET6 856 } 857 #endif 858 #ifdef INET 859 } 860 #endif 861 /* 862 * Use highest priority AC. 863 */ 864 if (v_wme_ac > d_wme_ac) 865 ac = v_wme_ac; 866 else 867 ac = d_wme_ac; 868 869 /* 870 * Apply ACM policy. 871 */ 872 if (ni->ni_vap->iv_opmode == IEEE80211_M_STA) { 873 static const int acmap[4] = { 874 WME_AC_BK, /* WME_AC_BE */ 875 WME_AC_BK, /* WME_AC_BK */ 876 WME_AC_BE, /* WME_AC_VI */ 877 WME_AC_VI, /* WME_AC_VO */ 878 }; 879 struct ieee80211com *ic = ni->ni_ic; 880 881 while (ac != WME_AC_BK && 882 ic->ic_wme.wme_wmeBssChanParams.cap_wmeParams[ac].wmep_acm) 883 ac = acmap[ac]; 884 } 885 done: 886 M_WME_SETAC(m, ac); 887 return 0; 888 } 889 890 /* 891 * Insure there is sufficient contiguous space to encapsulate the 892 * 802.11 data frame. If room isn't already there, arrange for it. 893 * Drivers and cipher modules assume we have done the necessary work 894 * and fail rudely if they don't find the space they need. 895 */ 896 struct mbuf * 897 ieee80211_mbuf_adjust(struct ieee80211vap *vap, int hdrsize, 898 struct ieee80211_key *key, struct mbuf *m) 899 { 900 #define TO_BE_RECLAIMED (sizeof(struct ether_header) - sizeof(struct llc)) 901 int needed_space = vap->iv_ic->ic_headroom + hdrsize; 902 903 if (key != NULL) { 904 /* XXX belongs in crypto code? */ 905 needed_space += key->wk_cipher->ic_header; 906 /* XXX frags */ 907 /* 908 * When crypto is being done in the host we must insure 909 * the data are writable for the cipher routines; clone 910 * a writable mbuf chain. 911 * XXX handle SWMIC specially 912 */ 913 if (key->wk_flags & (IEEE80211_KEY_SWENCRYPT|IEEE80211_KEY_SWENMIC)) { 914 m = m_unshare(m, M_NOWAIT); 915 if (m == NULL) { 916 IEEE80211_DPRINTF(vap, IEEE80211_MSG_OUTPUT, 917 "%s: cannot get writable mbuf\n", __func__); 918 vap->iv_stats.is_tx_nobuf++; /* XXX new stat */ 919 return NULL; 920 } 921 } 922 } 923 /* 924 * We know we are called just before stripping an Ethernet 925 * header and prepending an LLC header. This means we know 926 * there will be 927 * sizeof(struct ether_header) - sizeof(struct llc) 928 * bytes recovered to which we need additional space for the 929 * 802.11 header and any crypto header. 930 */ 931 /* XXX check trailing space and copy instead? */ 932 if (M_LEADINGSPACE(m) < needed_space - TO_BE_RECLAIMED) { 933 struct mbuf *n = m_gethdr(M_NOWAIT, m->m_type); 934 if (n == NULL) { 935 IEEE80211_DPRINTF(vap, IEEE80211_MSG_OUTPUT, 936 "%s: cannot expand storage\n", __func__); 937 vap->iv_stats.is_tx_nobuf++; 938 m_freem(m); 939 return NULL; 940 } 941 KASSERT(needed_space <= MHLEN, 942 ("not enough room, need %u got %zu\n", needed_space, MHLEN)); 943 /* 944 * Setup new mbuf to have leading space to prepend the 945 * 802.11 header and any crypto header bits that are 946 * required (the latter are added when the driver calls 947 * back to ieee80211_crypto_encap to do crypto encapsulation). 948 */ 949 /* NB: must be first 'cuz it clobbers m_data */ 950 m_move_pkthdr(n, m); 951 n->m_len = 0; /* NB: m_gethdr does not set */ 952 n->m_data += needed_space; 953 /* 954 * Pull up Ethernet header to create the expected layout. 955 * We could use m_pullup but that's overkill (i.e. we don't 956 * need the actual data) and it cannot fail so do it inline 957 * for speed. 958 */ 959 /* NB: struct ether_header is known to be contiguous */ 960 n->m_len += sizeof(struct ether_header); 961 m->m_len -= sizeof(struct ether_header); 962 m->m_data += sizeof(struct ether_header); 963 /* 964 * Replace the head of the chain. 965 */ 966 n->m_next = m; 967 m = n; 968 } 969 return m; 970 #undef TO_BE_RECLAIMED 971 } 972 973 /* 974 * Return the transmit key to use in sending a unicast frame. 975 * If a unicast key is set we use that. When no unicast key is set 976 * we fall back to the default transmit key. 977 */ 978 static __inline struct ieee80211_key * 979 ieee80211_crypto_getucastkey(struct ieee80211vap *vap, 980 struct ieee80211_node *ni) 981 { 982 if (IEEE80211_KEY_UNDEFINED(&ni->ni_ucastkey)) { 983 if (vap->iv_def_txkey == IEEE80211_KEYIX_NONE || 984 IEEE80211_KEY_UNDEFINED(&vap->iv_nw_keys[vap->iv_def_txkey])) 985 return NULL; 986 return &vap->iv_nw_keys[vap->iv_def_txkey]; 987 } else { 988 return &ni->ni_ucastkey; 989 } 990 } 991 992 /* 993 * Return the transmit key to use in sending a multicast frame. 994 * Multicast traffic always uses the group key which is installed as 995 * the default tx key. 996 */ 997 static __inline struct ieee80211_key * 998 ieee80211_crypto_getmcastkey(struct ieee80211vap *vap, 999 struct ieee80211_node *ni) 1000 { 1001 if (vap->iv_def_txkey == IEEE80211_KEYIX_NONE || 1002 IEEE80211_KEY_UNDEFINED(&vap->iv_nw_keys[vap->iv_def_txkey])) 1003 return NULL; 1004 return &vap->iv_nw_keys[vap->iv_def_txkey]; 1005 } 1006 1007 /* 1008 * Encapsulate an outbound data frame. The mbuf chain is updated. 1009 * If an error is encountered NULL is returned. The caller is required 1010 * to provide a node reference and pullup the ethernet header in the 1011 * first mbuf. 1012 * 1013 * NB: Packet is assumed to be processed by ieee80211_classify which 1014 * marked EAPOL frames w/ M_EAPOL. 1015 */ 1016 struct mbuf * 1017 ieee80211_encap(struct ieee80211vap *vap, struct ieee80211_node *ni, 1018 struct mbuf *m) 1019 { 1020 #define WH4(wh) ((struct ieee80211_frame_addr4 *)(wh)) 1021 #define MC01(mc) ((struct ieee80211_meshcntl_ae01 *)mc) 1022 struct ieee80211com *ic = ni->ni_ic; 1023 #ifdef IEEE80211_SUPPORT_MESH 1024 struct ieee80211_mesh_state *ms = vap->iv_mesh; 1025 struct ieee80211_meshcntl_ae10 *mc; 1026 struct ieee80211_mesh_route *rt = NULL; 1027 int dir = -1; 1028 #endif 1029 struct ether_header eh; 1030 struct ieee80211_frame *wh; 1031 struct ieee80211_key *key; 1032 struct llc *llc; 1033 int hdrsize, hdrspace, datalen, addqos, txfrag, is4addr; 1034 ieee80211_seq seqno; 1035 int meshhdrsize, meshae; 1036 uint8_t *qos; 1037 1038 /* 1039 * Copy existing Ethernet header to a safe place. The 1040 * rest of the code assumes it's ok to strip it when 1041 * reorganizing state for the final encapsulation. 1042 */ 1043 KASSERT(m->m_len >= sizeof(eh), ("no ethernet header!")); 1044 ETHER_HEADER_COPY(&eh, mtod(m, caddr_t)); 1045 1046 /* 1047 * Insure space for additional headers. First identify 1048 * transmit key to use in calculating any buffer adjustments 1049 * required. This is also used below to do privacy 1050 * encapsulation work. Then calculate the 802.11 header 1051 * size and any padding required by the driver. 1052 * 1053 * Note key may be NULL if we fall back to the default 1054 * transmit key and that is not set. In that case the 1055 * buffer may not be expanded as needed by the cipher 1056 * routines, but they will/should discard it. 1057 */ 1058 if (vap->iv_flags & IEEE80211_F_PRIVACY) { 1059 if (vap->iv_opmode == IEEE80211_M_STA || 1060 !IEEE80211_IS_MULTICAST(eh.ether_dhost) || 1061 (vap->iv_opmode == IEEE80211_M_WDS && 1062 (vap->iv_flags_ext & IEEE80211_FEXT_WDSLEGACY))) 1063 key = ieee80211_crypto_getucastkey(vap, ni); 1064 else 1065 key = ieee80211_crypto_getmcastkey(vap, ni); 1066 if (key == NULL && (m->m_flags & M_EAPOL) == 0) { 1067 IEEE80211_NOTE_MAC(vap, IEEE80211_MSG_CRYPTO, 1068 eh.ether_dhost, 1069 "no default transmit key (%s) deftxkey %u", 1070 __func__, vap->iv_def_txkey); 1071 vap->iv_stats.is_tx_nodefkey++; 1072 goto bad; 1073 } 1074 } else 1075 key = NULL; 1076 /* 1077 * XXX Some ap's don't handle QoS-encapsulated EAPOL 1078 * frames so suppress use. This may be an issue if other 1079 * ap's require all data frames to be QoS-encapsulated 1080 * once negotiated in which case we'll need to make this 1081 * configurable. 1082 * NB: mesh data frames are QoS. 1083 */ 1084 addqos = ((ni->ni_flags & (IEEE80211_NODE_QOS|IEEE80211_NODE_HT)) || 1085 (vap->iv_opmode == IEEE80211_M_MBSS)) && 1086 (m->m_flags & M_EAPOL) == 0; 1087 if (addqos) 1088 hdrsize = sizeof(struct ieee80211_qosframe); 1089 else 1090 hdrsize = sizeof(struct ieee80211_frame); 1091 #ifdef IEEE80211_SUPPORT_MESH 1092 if (vap->iv_opmode == IEEE80211_M_MBSS) { 1093 /* 1094 * Mesh data frames are encapsulated according to the 1095 * rules of Section 11B.8.5 (p.139 of D3.0 spec). 1096 * o Group Addressed data (aka multicast) originating 1097 * at the local sta are sent w/ 3-address format and 1098 * address extension mode 00 1099 * o Individually Addressed data (aka unicast) originating 1100 * at the local sta are sent w/ 4-address format and 1101 * address extension mode 00 1102 * o Group Addressed data forwarded from a non-mesh sta are 1103 * sent w/ 3-address format and address extension mode 01 1104 * o Individually Address data from another sta are sent 1105 * w/ 4-address format and address extension mode 10 1106 */ 1107 is4addr = 0; /* NB: don't use, disable */ 1108 if (!IEEE80211_IS_MULTICAST(eh.ether_dhost)) { 1109 rt = ieee80211_mesh_rt_find(vap, eh.ether_dhost); 1110 KASSERT(rt != NULL, ("route is NULL")); 1111 dir = IEEE80211_FC1_DIR_DSTODS; 1112 hdrsize += IEEE80211_ADDR_LEN; 1113 if (rt->rt_flags & IEEE80211_MESHRT_FLAGS_PROXY) { 1114 if (IEEE80211_ADDR_EQ(rt->rt_mesh_gate, 1115 vap->iv_myaddr)) { 1116 IEEE80211_NOTE_MAC(vap, 1117 IEEE80211_MSG_MESH, 1118 eh.ether_dhost, 1119 "%s", "trying to send to ourself"); 1120 goto bad; 1121 } 1122 meshae = IEEE80211_MESH_AE_10; 1123 meshhdrsize = 1124 sizeof(struct ieee80211_meshcntl_ae10); 1125 } else { 1126 meshae = IEEE80211_MESH_AE_00; 1127 meshhdrsize = 1128 sizeof(struct ieee80211_meshcntl); 1129 } 1130 } else { 1131 dir = IEEE80211_FC1_DIR_FROMDS; 1132 if (!IEEE80211_ADDR_EQ(eh.ether_shost, vap->iv_myaddr)) { 1133 /* proxy group */ 1134 meshae = IEEE80211_MESH_AE_01; 1135 meshhdrsize = 1136 sizeof(struct ieee80211_meshcntl_ae01); 1137 } else { 1138 /* group */ 1139 meshae = IEEE80211_MESH_AE_00; 1140 meshhdrsize = sizeof(struct ieee80211_meshcntl); 1141 } 1142 } 1143 } else { 1144 #endif 1145 /* 1146 * 4-address frames need to be generated for: 1147 * o packets sent through a WDS vap (IEEE80211_M_WDS) 1148 * o packets sent through a vap marked for relaying 1149 * (e.g. a station operating with dynamic WDS) 1150 */ 1151 is4addr = vap->iv_opmode == IEEE80211_M_WDS || 1152 ((vap->iv_flags_ext & IEEE80211_FEXT_4ADDR) && 1153 !IEEE80211_ADDR_EQ(eh.ether_shost, vap->iv_myaddr)); 1154 if (is4addr) 1155 hdrsize += IEEE80211_ADDR_LEN; 1156 meshhdrsize = meshae = 0; 1157 #ifdef IEEE80211_SUPPORT_MESH 1158 } 1159 #endif 1160 /* 1161 * Honor driver DATAPAD requirement. 1162 */ 1163 if (ic->ic_flags & IEEE80211_F_DATAPAD) 1164 hdrspace = roundup(hdrsize, sizeof(uint32_t)); 1165 else 1166 hdrspace = hdrsize; 1167 1168 if (__predict_true((m->m_flags & M_FF) == 0)) { 1169 /* 1170 * Normal frame. 1171 */ 1172 m = ieee80211_mbuf_adjust(vap, hdrspace + meshhdrsize, key, m); 1173 if (m == NULL) { 1174 /* NB: ieee80211_mbuf_adjust handles msgs+statistics */ 1175 goto bad; 1176 } 1177 /* NB: this could be optimized 'cuz of ieee80211_mbuf_adjust */ 1178 m_adj(m, sizeof(struct ether_header) - sizeof(struct llc)); 1179 llc = mtod(m, struct llc *); 1180 llc->llc_dsap = llc->llc_ssap = LLC_SNAP_LSAP; 1181 llc->llc_control = LLC_UI; 1182 llc->llc_snap.org_code[0] = 0; 1183 llc->llc_snap.org_code[1] = 0; 1184 llc->llc_snap.org_code[2] = 0; 1185 llc->llc_snap.ether_type = eh.ether_type; 1186 } else { 1187 #ifdef IEEE80211_SUPPORT_SUPERG 1188 /* 1189 * Aggregated frame. 1190 */ 1191 m = ieee80211_ff_encap(vap, m, hdrspace + meshhdrsize, key); 1192 if (m == NULL) 1193 #endif 1194 goto bad; 1195 } 1196 datalen = m->m_pkthdr.len; /* NB: w/o 802.11 header */ 1197 1198 M_PREPEND(m, hdrspace + meshhdrsize, M_NOWAIT); 1199 if (m == NULL) { 1200 vap->iv_stats.is_tx_nobuf++; 1201 goto bad; 1202 } 1203 wh = mtod(m, struct ieee80211_frame *); 1204 wh->i_fc[0] = IEEE80211_FC0_VERSION_0 | IEEE80211_FC0_TYPE_DATA; 1205 *(uint16_t *)wh->i_dur = 0; 1206 qos = NULL; /* NB: quiet compiler */ 1207 if (is4addr) { 1208 wh->i_fc[1] = IEEE80211_FC1_DIR_DSTODS; 1209 IEEE80211_ADDR_COPY(wh->i_addr1, ni->ni_macaddr); 1210 IEEE80211_ADDR_COPY(wh->i_addr2, vap->iv_myaddr); 1211 IEEE80211_ADDR_COPY(wh->i_addr3, eh.ether_dhost); 1212 IEEE80211_ADDR_COPY(WH4(wh)->i_addr4, eh.ether_shost); 1213 } else switch (vap->iv_opmode) { 1214 case IEEE80211_M_STA: 1215 wh->i_fc[1] = IEEE80211_FC1_DIR_TODS; 1216 IEEE80211_ADDR_COPY(wh->i_addr1, ni->ni_bssid); 1217 IEEE80211_ADDR_COPY(wh->i_addr2, eh.ether_shost); 1218 IEEE80211_ADDR_COPY(wh->i_addr3, eh.ether_dhost); 1219 break; 1220 case IEEE80211_M_IBSS: 1221 case IEEE80211_M_AHDEMO: 1222 wh->i_fc[1] = IEEE80211_FC1_DIR_NODS; 1223 IEEE80211_ADDR_COPY(wh->i_addr1, eh.ether_dhost); 1224 IEEE80211_ADDR_COPY(wh->i_addr2, eh.ether_shost); 1225 /* 1226 * NB: always use the bssid from iv_bss as the 1227 * neighbor's may be stale after an ibss merge 1228 */ 1229 IEEE80211_ADDR_COPY(wh->i_addr3, vap->iv_bss->ni_bssid); 1230 break; 1231 case IEEE80211_M_HOSTAP: 1232 wh->i_fc[1] = IEEE80211_FC1_DIR_FROMDS; 1233 IEEE80211_ADDR_COPY(wh->i_addr1, eh.ether_dhost); 1234 IEEE80211_ADDR_COPY(wh->i_addr2, ni->ni_bssid); 1235 IEEE80211_ADDR_COPY(wh->i_addr3, eh.ether_shost); 1236 break; 1237 #ifdef IEEE80211_SUPPORT_MESH 1238 case IEEE80211_M_MBSS: 1239 /* NB: offset by hdrspace to deal with DATAPAD */ 1240 mc = (struct ieee80211_meshcntl_ae10 *) 1241 (mtod(m, uint8_t *) + hdrspace); 1242 wh->i_fc[1] = dir; 1243 switch (meshae) { 1244 case IEEE80211_MESH_AE_00: /* no proxy */ 1245 mc->mc_flags = 0; 1246 if (dir == IEEE80211_FC1_DIR_DSTODS) { /* ucast */ 1247 IEEE80211_ADDR_COPY(wh->i_addr1, 1248 ni->ni_macaddr); 1249 IEEE80211_ADDR_COPY(wh->i_addr2, 1250 vap->iv_myaddr); 1251 IEEE80211_ADDR_COPY(wh->i_addr3, 1252 eh.ether_dhost); 1253 IEEE80211_ADDR_COPY(WH4(wh)->i_addr4, 1254 eh.ether_shost); 1255 qos =((struct ieee80211_qosframe_addr4 *) 1256 wh)->i_qos; 1257 } else if (dir == IEEE80211_FC1_DIR_FROMDS) { 1258 /* mcast */ 1259 IEEE80211_ADDR_COPY(wh->i_addr1, 1260 eh.ether_dhost); 1261 IEEE80211_ADDR_COPY(wh->i_addr2, 1262 vap->iv_myaddr); 1263 IEEE80211_ADDR_COPY(wh->i_addr3, 1264 eh.ether_shost); 1265 qos = ((struct ieee80211_qosframe *) 1266 wh)->i_qos; 1267 } 1268 break; 1269 case IEEE80211_MESH_AE_01: /* mcast, proxy */ 1270 wh->i_fc[1] = IEEE80211_FC1_DIR_FROMDS; 1271 IEEE80211_ADDR_COPY(wh->i_addr1, eh.ether_dhost); 1272 IEEE80211_ADDR_COPY(wh->i_addr2, vap->iv_myaddr); 1273 IEEE80211_ADDR_COPY(wh->i_addr3, vap->iv_myaddr); 1274 mc->mc_flags = 1; 1275 IEEE80211_ADDR_COPY(MC01(mc)->mc_addr4, 1276 eh.ether_shost); 1277 qos = ((struct ieee80211_qosframe *) wh)->i_qos; 1278 break; 1279 case IEEE80211_MESH_AE_10: /* ucast, proxy */ 1280 KASSERT(rt != NULL, ("route is NULL")); 1281 IEEE80211_ADDR_COPY(wh->i_addr1, rt->rt_nexthop); 1282 IEEE80211_ADDR_COPY(wh->i_addr2, vap->iv_myaddr); 1283 IEEE80211_ADDR_COPY(wh->i_addr3, rt->rt_mesh_gate); 1284 IEEE80211_ADDR_COPY(WH4(wh)->i_addr4, vap->iv_myaddr); 1285 mc->mc_flags = IEEE80211_MESH_AE_10; 1286 IEEE80211_ADDR_COPY(mc->mc_addr5, eh.ether_dhost); 1287 IEEE80211_ADDR_COPY(mc->mc_addr6, eh.ether_shost); 1288 qos = ((struct ieee80211_qosframe_addr4 *) wh)->i_qos; 1289 break; 1290 default: 1291 KASSERT(0, ("meshae %d", meshae)); 1292 break; 1293 } 1294 mc->mc_ttl = ms->ms_ttl; 1295 ms->ms_seq++; 1296 LE_WRITE_4(mc->mc_seq, ms->ms_seq); 1297 break; 1298 #endif 1299 case IEEE80211_M_WDS: /* NB: is4addr should always be true */ 1300 default: 1301 goto bad; 1302 } 1303 if (m->m_flags & M_MORE_DATA) 1304 wh->i_fc[1] |= IEEE80211_FC1_MORE_DATA; 1305 if (addqos) { 1306 int ac, tid; 1307 1308 if (is4addr) { 1309 qos = ((struct ieee80211_qosframe_addr4 *) wh)->i_qos; 1310 /* NB: mesh case handled earlier */ 1311 } else if (vap->iv_opmode != IEEE80211_M_MBSS) 1312 qos = ((struct ieee80211_qosframe *) wh)->i_qos; 1313 ac = M_WME_GETAC(m); 1314 /* map from access class/queue to 11e header priorty value */ 1315 tid = WME_AC_TO_TID(ac); 1316 qos[0] = tid & IEEE80211_QOS_TID; 1317 if (ic->ic_wme.wme_wmeChanParams.cap_wmeParams[ac].wmep_noackPolicy) 1318 qos[0] |= IEEE80211_QOS_ACKPOLICY_NOACK; 1319 #ifdef IEEE80211_SUPPORT_MESH 1320 if (vap->iv_opmode == IEEE80211_M_MBSS) 1321 qos[1] = IEEE80211_QOS_MC; 1322 else 1323 #endif 1324 qos[1] = 0; 1325 wh->i_fc[0] |= IEEE80211_FC0_SUBTYPE_QOS; 1326 1327 if ((m->m_flags & M_AMPDU_MPDU) == 0) { 1328 /* 1329 * NB: don't assign a sequence # to potential 1330 * aggregates; we expect this happens at the 1331 * point the frame comes off any aggregation q 1332 * as otherwise we may introduce holes in the 1333 * BA sequence space and/or make window accouting 1334 * more difficult. 1335 * 1336 * XXX may want to control this with a driver 1337 * capability; this may also change when we pull 1338 * aggregation up into net80211 1339 */ 1340 seqno = ni->ni_txseqs[tid]++; 1341 *(uint16_t *)wh->i_seq = 1342 htole16(seqno << IEEE80211_SEQ_SEQ_SHIFT); 1343 M_SEQNO_SET(m, seqno); 1344 } 1345 } else { 1346 seqno = ni->ni_txseqs[IEEE80211_NONQOS_TID]++; 1347 *(uint16_t *)wh->i_seq = 1348 htole16(seqno << IEEE80211_SEQ_SEQ_SHIFT); 1349 M_SEQNO_SET(m, seqno); 1350 } 1351 1352 1353 /* check if xmit fragmentation is required */ 1354 txfrag = (m->m_pkthdr.len > vap->iv_fragthreshold && 1355 !IEEE80211_IS_MULTICAST(wh->i_addr1) && 1356 (vap->iv_caps & IEEE80211_C_TXFRAG) && 1357 (m->m_flags & (M_FF | M_AMPDU_MPDU)) == 0); 1358 if (key != NULL) { 1359 /* 1360 * IEEE 802.1X: send EAPOL frames always in the clear. 1361 * WPA/WPA2: encrypt EAPOL keys when pairwise keys are set. 1362 */ 1363 if ((m->m_flags & M_EAPOL) == 0 || 1364 ((vap->iv_flags & IEEE80211_F_WPA) && 1365 (vap->iv_opmode == IEEE80211_M_STA ? 1366 !IEEE80211_KEY_UNDEFINED(key) : 1367 !IEEE80211_KEY_UNDEFINED(&ni->ni_ucastkey)))) { 1368 wh->i_fc[1] |= IEEE80211_FC1_WEP; 1369 if (!ieee80211_crypto_enmic(vap, key, m, txfrag)) { 1370 IEEE80211_NOTE_MAC(vap, IEEE80211_MSG_OUTPUT, 1371 eh.ether_dhost, 1372 "%s", "enmic failed, discard frame"); 1373 vap->iv_stats.is_crypto_enmicfail++; 1374 goto bad; 1375 } 1376 } 1377 } 1378 if (txfrag && !ieee80211_fragment(vap, m, hdrsize, 1379 key != NULL ? key->wk_cipher->ic_header : 0, vap->iv_fragthreshold)) 1380 goto bad; 1381 1382 m->m_flags |= M_ENCAP; /* mark encapsulated */ 1383 1384 IEEE80211_NODE_STAT(ni, tx_data); 1385 if (IEEE80211_IS_MULTICAST(wh->i_addr1)) { 1386 IEEE80211_NODE_STAT(ni, tx_mcast); 1387 m->m_flags |= M_MCAST; 1388 } else 1389 IEEE80211_NODE_STAT(ni, tx_ucast); 1390 IEEE80211_NODE_STAT_ADD(ni, tx_bytes, datalen); 1391 1392 return m; 1393 bad: 1394 if (m != NULL) 1395 m_freem(m); 1396 return NULL; 1397 #undef WH4 1398 #undef MC01 1399 } 1400 1401 /* 1402 * Fragment the frame according to the specified mtu. 1403 * The size of the 802.11 header (w/o padding) is provided 1404 * so we don't need to recalculate it. We create a new 1405 * mbuf for each fragment and chain it through m_nextpkt; 1406 * we might be able to optimize this by reusing the original 1407 * packet's mbufs but that is significantly more complicated. 1408 */ 1409 static int 1410 ieee80211_fragment(struct ieee80211vap *vap, struct mbuf *m0, 1411 u_int hdrsize, u_int ciphdrsize, u_int mtu) 1412 { 1413 struct ieee80211_frame *wh, *whf; 1414 struct mbuf *m, *prev, *next; 1415 u_int totalhdrsize, fragno, fragsize, off, remainder, payload; 1416 1417 KASSERT(m0->m_nextpkt == NULL, ("mbuf already chained?")); 1418 KASSERT(m0->m_pkthdr.len > mtu, 1419 ("pktlen %u mtu %u", m0->m_pkthdr.len, mtu)); 1420 1421 wh = mtod(m0, struct ieee80211_frame *); 1422 /* NB: mark the first frag; it will be propagated below */ 1423 wh->i_fc[1] |= IEEE80211_FC1_MORE_FRAG; 1424 totalhdrsize = hdrsize + ciphdrsize; 1425 fragno = 1; 1426 off = mtu - ciphdrsize; 1427 remainder = m0->m_pkthdr.len - off; 1428 prev = m0; 1429 do { 1430 fragsize = totalhdrsize + remainder; 1431 if (fragsize > mtu) 1432 fragsize = mtu; 1433 /* XXX fragsize can be >2048! */ 1434 KASSERT(fragsize < MCLBYTES, 1435 ("fragment size %u too big!", fragsize)); 1436 if (fragsize > MHLEN) 1437 m = m_getcl(M_NOWAIT, MT_DATA, M_PKTHDR); 1438 else 1439 m = m_gethdr(M_NOWAIT, MT_DATA); 1440 if (m == NULL) 1441 goto bad; 1442 /* leave room to prepend any cipher header */ 1443 m_align(m, fragsize - ciphdrsize); 1444 1445 /* 1446 * Form the header in the fragment. Note that since 1447 * we mark the first fragment with the MORE_FRAG bit 1448 * it automatically is propagated to each fragment; we 1449 * need only clear it on the last fragment (done below). 1450 * NB: frag 1+ dont have Mesh Control field present. 1451 */ 1452 whf = mtod(m, struct ieee80211_frame *); 1453 memcpy(whf, wh, hdrsize); 1454 #ifdef IEEE80211_SUPPORT_MESH 1455 if (vap->iv_opmode == IEEE80211_M_MBSS) { 1456 if (IEEE80211_IS_DSTODS(wh)) 1457 ((struct ieee80211_qosframe_addr4 *) 1458 whf)->i_qos[1] &= ~IEEE80211_QOS_MC; 1459 else 1460 ((struct ieee80211_qosframe *) 1461 whf)->i_qos[1] &= ~IEEE80211_QOS_MC; 1462 } 1463 #endif 1464 *(uint16_t *)&whf->i_seq[0] |= htole16( 1465 (fragno & IEEE80211_SEQ_FRAG_MASK) << 1466 IEEE80211_SEQ_FRAG_SHIFT); 1467 fragno++; 1468 1469 payload = fragsize - totalhdrsize; 1470 /* NB: destination is known to be contiguous */ 1471 m_copydata(m0, off, payload, mtod(m, uint8_t *) + hdrsize); 1472 m->m_len = hdrsize + payload; 1473 m->m_pkthdr.len = hdrsize + payload; 1474 m->m_flags |= M_FRAG; 1475 1476 /* chain up the fragment */ 1477 prev->m_nextpkt = m; 1478 prev = m; 1479 1480 /* deduct fragment just formed */ 1481 remainder -= payload; 1482 off += payload; 1483 } while (remainder != 0); 1484 1485 /* set the last fragment */ 1486 m->m_flags |= M_LASTFRAG; 1487 whf->i_fc[1] &= ~IEEE80211_FC1_MORE_FRAG; 1488 1489 /* strip first mbuf now that everything has been copied */ 1490 m_adj(m0, -(m0->m_pkthdr.len - (mtu - ciphdrsize))); 1491 m0->m_flags |= M_FIRSTFRAG | M_FRAG; 1492 1493 vap->iv_stats.is_tx_fragframes++; 1494 vap->iv_stats.is_tx_frags += fragno-1; 1495 1496 return 1; 1497 bad: 1498 /* reclaim fragments but leave original frame for caller to free */ 1499 for (m = m0->m_nextpkt; m != NULL; m = next) { 1500 next = m->m_nextpkt; 1501 m->m_nextpkt = NULL; /* XXX paranoid */ 1502 m_freem(m); 1503 } 1504 m0->m_nextpkt = NULL; 1505 return 0; 1506 } 1507 1508 /* 1509 * Add a supported rates element id to a frame. 1510 */ 1511 uint8_t * 1512 ieee80211_add_rates(uint8_t *frm, const struct ieee80211_rateset *rs) 1513 { 1514 int nrates; 1515 1516 *frm++ = IEEE80211_ELEMID_RATES; 1517 nrates = rs->rs_nrates; 1518 if (nrates > IEEE80211_RATE_SIZE) 1519 nrates = IEEE80211_RATE_SIZE; 1520 *frm++ = nrates; 1521 memcpy(frm, rs->rs_rates, nrates); 1522 return frm + nrates; 1523 } 1524 1525 /* 1526 * Add an extended supported rates element id to a frame. 1527 */ 1528 uint8_t * 1529 ieee80211_add_xrates(uint8_t *frm, const struct ieee80211_rateset *rs) 1530 { 1531 /* 1532 * Add an extended supported rates element if operating in 11g mode. 1533 */ 1534 if (rs->rs_nrates > IEEE80211_RATE_SIZE) { 1535 int nrates = rs->rs_nrates - IEEE80211_RATE_SIZE; 1536 *frm++ = IEEE80211_ELEMID_XRATES; 1537 *frm++ = nrates; 1538 memcpy(frm, rs->rs_rates + IEEE80211_RATE_SIZE, nrates); 1539 frm += nrates; 1540 } 1541 return frm; 1542 } 1543 1544 /* 1545 * Add an ssid element to a frame. 1546 */ 1547 static uint8_t * 1548 ieee80211_add_ssid(uint8_t *frm, const uint8_t *ssid, u_int len) 1549 { 1550 *frm++ = IEEE80211_ELEMID_SSID; 1551 *frm++ = len; 1552 memcpy(frm, ssid, len); 1553 return frm + len; 1554 } 1555 1556 /* 1557 * Add an erp element to a frame. 1558 */ 1559 static uint8_t * 1560 ieee80211_add_erp(uint8_t *frm, struct ieee80211com *ic) 1561 { 1562 uint8_t erp; 1563 1564 *frm++ = IEEE80211_ELEMID_ERP; 1565 *frm++ = 1; 1566 erp = 0; 1567 if (ic->ic_nonerpsta != 0) 1568 erp |= IEEE80211_ERP_NON_ERP_PRESENT; 1569 if (ic->ic_flags & IEEE80211_F_USEPROT) 1570 erp |= IEEE80211_ERP_USE_PROTECTION; 1571 if (ic->ic_flags & IEEE80211_F_USEBARKER) 1572 erp |= IEEE80211_ERP_LONG_PREAMBLE; 1573 *frm++ = erp; 1574 return frm; 1575 } 1576 1577 /* 1578 * Add a CFParams element to a frame. 1579 */ 1580 static uint8_t * 1581 ieee80211_add_cfparms(uint8_t *frm, struct ieee80211com *ic) 1582 { 1583 #define ADDSHORT(frm, v) do { \ 1584 LE_WRITE_2(frm, v); \ 1585 frm += 2; \ 1586 } while (0) 1587 *frm++ = IEEE80211_ELEMID_CFPARMS; 1588 *frm++ = 6; 1589 *frm++ = 0; /* CFP count */ 1590 *frm++ = 2; /* CFP period */ 1591 ADDSHORT(frm, 0); /* CFP MaxDuration (TU) */ 1592 ADDSHORT(frm, 0); /* CFP CurRemaining (TU) */ 1593 return frm; 1594 #undef ADDSHORT 1595 } 1596 1597 static __inline uint8_t * 1598 add_appie(uint8_t *frm, const struct ieee80211_appie *ie) 1599 { 1600 memcpy(frm, ie->ie_data, ie->ie_len); 1601 return frm + ie->ie_len; 1602 } 1603 1604 static __inline uint8_t * 1605 add_ie(uint8_t *frm, const uint8_t *ie) 1606 { 1607 memcpy(frm, ie, 2 + ie[1]); 1608 return frm + 2 + ie[1]; 1609 } 1610 1611 #define WME_OUI_BYTES 0x00, 0x50, 0xf2 1612 /* 1613 * Add a WME information element to a frame. 1614 */ 1615 static uint8_t * 1616 ieee80211_add_wme_info(uint8_t *frm, struct ieee80211_wme_state *wme) 1617 { 1618 static const struct ieee80211_wme_info info = { 1619 .wme_id = IEEE80211_ELEMID_VENDOR, 1620 .wme_len = sizeof(struct ieee80211_wme_info) - 2, 1621 .wme_oui = { WME_OUI_BYTES }, 1622 .wme_type = WME_OUI_TYPE, 1623 .wme_subtype = WME_INFO_OUI_SUBTYPE, 1624 .wme_version = WME_VERSION, 1625 .wme_info = 0, 1626 }; 1627 memcpy(frm, &info, sizeof(info)); 1628 return frm + sizeof(info); 1629 } 1630 1631 /* 1632 * Add a WME parameters element to a frame. 1633 */ 1634 static uint8_t * 1635 ieee80211_add_wme_param(uint8_t *frm, struct ieee80211_wme_state *wme) 1636 { 1637 #define SM(_v, _f) (((_v) << _f##_S) & _f) 1638 #define ADDSHORT(frm, v) do { \ 1639 LE_WRITE_2(frm, v); \ 1640 frm += 2; \ 1641 } while (0) 1642 /* NB: this works 'cuz a param has an info at the front */ 1643 static const struct ieee80211_wme_info param = { 1644 .wme_id = IEEE80211_ELEMID_VENDOR, 1645 .wme_len = sizeof(struct ieee80211_wme_param) - 2, 1646 .wme_oui = { WME_OUI_BYTES }, 1647 .wme_type = WME_OUI_TYPE, 1648 .wme_subtype = WME_PARAM_OUI_SUBTYPE, 1649 .wme_version = WME_VERSION, 1650 }; 1651 int i; 1652 1653 memcpy(frm, ¶m, sizeof(param)); 1654 frm += __offsetof(struct ieee80211_wme_info, wme_info); 1655 *frm++ = wme->wme_bssChanParams.cap_info; /* AC info */ 1656 *frm++ = 0; /* reserved field */ 1657 for (i = 0; i < WME_NUM_AC; i++) { 1658 const struct wmeParams *ac = 1659 &wme->wme_bssChanParams.cap_wmeParams[i]; 1660 *frm++ = SM(i, WME_PARAM_ACI) 1661 | SM(ac->wmep_acm, WME_PARAM_ACM) 1662 | SM(ac->wmep_aifsn, WME_PARAM_AIFSN) 1663 ; 1664 *frm++ = SM(ac->wmep_logcwmax, WME_PARAM_LOGCWMAX) 1665 | SM(ac->wmep_logcwmin, WME_PARAM_LOGCWMIN) 1666 ; 1667 ADDSHORT(frm, ac->wmep_txopLimit); 1668 } 1669 return frm; 1670 #undef SM 1671 #undef ADDSHORT 1672 } 1673 #undef WME_OUI_BYTES 1674 1675 /* 1676 * Add an 11h Power Constraint element to a frame. 1677 */ 1678 static uint8_t * 1679 ieee80211_add_powerconstraint(uint8_t *frm, struct ieee80211vap *vap) 1680 { 1681 const struct ieee80211_channel *c = vap->iv_bss->ni_chan; 1682 /* XXX per-vap tx power limit? */ 1683 int8_t limit = vap->iv_ic->ic_txpowlimit / 2; 1684 1685 frm[0] = IEEE80211_ELEMID_PWRCNSTR; 1686 frm[1] = 1; 1687 frm[2] = c->ic_maxregpower > limit ? c->ic_maxregpower - limit : 0; 1688 return frm + 3; 1689 } 1690 1691 /* 1692 * Add an 11h Power Capability element to a frame. 1693 */ 1694 static uint8_t * 1695 ieee80211_add_powercapability(uint8_t *frm, const struct ieee80211_channel *c) 1696 { 1697 frm[0] = IEEE80211_ELEMID_PWRCAP; 1698 frm[1] = 2; 1699 frm[2] = c->ic_minpower; 1700 frm[3] = c->ic_maxpower; 1701 return frm + 4; 1702 } 1703 1704 /* 1705 * Add an 11h Supported Channels element to a frame. 1706 */ 1707 static uint8_t * 1708 ieee80211_add_supportedchannels(uint8_t *frm, struct ieee80211com *ic) 1709 { 1710 static const int ielen = 26; 1711 1712 frm[0] = IEEE80211_ELEMID_SUPPCHAN; 1713 frm[1] = ielen; 1714 /* XXX not correct */ 1715 memcpy(frm+2, ic->ic_chan_avail, ielen); 1716 return frm + 2 + ielen; 1717 } 1718 1719 /* 1720 * Add an 11h Quiet time element to a frame. 1721 */ 1722 static uint8_t * 1723 ieee80211_add_quiet(uint8_t *frm, struct ieee80211vap *vap) 1724 { 1725 struct ieee80211_quiet_ie *quiet = (struct ieee80211_quiet_ie *) frm; 1726 1727 quiet->quiet_ie = IEEE80211_ELEMID_QUIET; 1728 quiet->len = 6; 1729 if (vap->iv_quiet_count_value == 1) 1730 vap->iv_quiet_count_value = vap->iv_quiet_count; 1731 else if (vap->iv_quiet_count_value > 1) 1732 vap->iv_quiet_count_value--; 1733 1734 if (vap->iv_quiet_count_value == 0) { 1735 /* value 0 is reserved as per 802.11h standerd */ 1736 vap->iv_quiet_count_value = 1; 1737 } 1738 1739 quiet->tbttcount = vap->iv_quiet_count_value; 1740 quiet->period = vap->iv_quiet_period; 1741 quiet->duration = htole16(vap->iv_quiet_duration); 1742 quiet->offset = htole16(vap->iv_quiet_offset); 1743 return frm + sizeof(*quiet); 1744 } 1745 1746 /* 1747 * Add an 11h Channel Switch Announcement element to a frame. 1748 * Note that we use the per-vap CSA count to adjust the global 1749 * counter so we can use this routine to form probe response 1750 * frames and get the current count. 1751 */ 1752 static uint8_t * 1753 ieee80211_add_csa(uint8_t *frm, struct ieee80211vap *vap) 1754 { 1755 struct ieee80211com *ic = vap->iv_ic; 1756 struct ieee80211_csa_ie *csa = (struct ieee80211_csa_ie *) frm; 1757 1758 csa->csa_ie = IEEE80211_ELEMID_CSA; 1759 csa->csa_len = 3; 1760 csa->csa_mode = 1; /* XXX force quiet on channel */ 1761 csa->csa_newchan = ieee80211_chan2ieee(ic, ic->ic_csa_newchan); 1762 csa->csa_count = ic->ic_csa_count - vap->iv_csa_count; 1763 return frm + sizeof(*csa); 1764 } 1765 1766 /* 1767 * Add an 11h country information element to a frame. 1768 */ 1769 static uint8_t * 1770 ieee80211_add_countryie(uint8_t *frm, struct ieee80211com *ic) 1771 { 1772 1773 if (ic->ic_countryie == NULL || 1774 ic->ic_countryie_chan != ic->ic_bsschan) { 1775 /* 1776 * Handle lazy construction of ie. This is done on 1777 * first use and after a channel change that requires 1778 * re-calculation. 1779 */ 1780 if (ic->ic_countryie != NULL) 1781 free(ic->ic_countryie, M_80211_NODE_IE); 1782 ic->ic_countryie = ieee80211_alloc_countryie(ic); 1783 if (ic->ic_countryie == NULL) 1784 return frm; 1785 ic->ic_countryie_chan = ic->ic_bsschan; 1786 } 1787 return add_appie(frm, ic->ic_countryie); 1788 } 1789 1790 /* 1791 * Send a probe request frame with the specified ssid 1792 * and any optional information element data. 1793 */ 1794 int 1795 ieee80211_send_probereq(struct ieee80211_node *ni, 1796 const uint8_t sa[IEEE80211_ADDR_LEN], 1797 const uint8_t da[IEEE80211_ADDR_LEN], 1798 const uint8_t bssid[IEEE80211_ADDR_LEN], 1799 const uint8_t *ssid, size_t ssidlen) 1800 { 1801 struct ieee80211vap *vap = ni->ni_vap; 1802 struct ieee80211com *ic = ni->ni_ic; 1803 const struct ieee80211_txparam *tp; 1804 struct ieee80211_bpf_params params; 1805 struct ieee80211_frame *wh; 1806 const struct ieee80211_rateset *rs; 1807 struct mbuf *m; 1808 uint8_t *frm; 1809 1810 if (vap->iv_state == IEEE80211_S_CAC) { 1811 IEEE80211_NOTE(vap, IEEE80211_MSG_OUTPUT, ni, 1812 "block %s frame in CAC state", "probe request"); 1813 vap->iv_stats.is_tx_badstate++; 1814 return EIO; /* XXX */ 1815 } 1816 1817 /* 1818 * Hold a reference on the node so it doesn't go away until after 1819 * the xmit is complete all the way in the driver. On error we 1820 * will remove our reference. 1821 */ 1822 IEEE80211_DPRINTF(vap, IEEE80211_MSG_NODE, 1823 "ieee80211_ref_node (%s:%u) %p<%s> refcnt %d\n", 1824 __func__, __LINE__, 1825 ni, ether_sprintf(ni->ni_macaddr), 1826 ieee80211_node_refcnt(ni)+1); 1827 ieee80211_ref_node(ni); 1828 1829 /* 1830 * prreq frame format 1831 * [tlv] ssid 1832 * [tlv] supported rates 1833 * [tlv] RSN (optional) 1834 * [tlv] extended supported rates 1835 * [tlv] WPA (optional) 1836 * [tlv] user-specified ie's 1837 */ 1838 m = ieee80211_getmgtframe(&frm, 1839 ic->ic_headroom + sizeof(struct ieee80211_frame), 1840 2 + IEEE80211_NWID_LEN 1841 + 2 + IEEE80211_RATE_SIZE 1842 + sizeof(struct ieee80211_ie_wpa) 1843 + 2 + (IEEE80211_RATE_MAXSIZE - IEEE80211_RATE_SIZE) 1844 + sizeof(struct ieee80211_ie_wpa) 1845 + (vap->iv_appie_probereq != NULL ? 1846 vap->iv_appie_probereq->ie_len : 0) 1847 ); 1848 if (m == NULL) { 1849 vap->iv_stats.is_tx_nobuf++; 1850 ieee80211_free_node(ni); 1851 return ENOMEM; 1852 } 1853 1854 frm = ieee80211_add_ssid(frm, ssid, ssidlen); 1855 rs = ieee80211_get_suprates(ic, ic->ic_curchan); 1856 frm = ieee80211_add_rates(frm, rs); 1857 if (vap->iv_flags & IEEE80211_F_WPA2) { 1858 if (vap->iv_rsn_ie != NULL) 1859 frm = add_ie(frm, vap->iv_rsn_ie); 1860 /* XXX else complain? */ 1861 } 1862 frm = ieee80211_add_xrates(frm, rs); 1863 if (vap->iv_flags & IEEE80211_F_WPA1) { 1864 if (vap->iv_wpa_ie != NULL) 1865 frm = add_ie(frm, vap->iv_wpa_ie); 1866 /* XXX else complain? */ 1867 } 1868 if (vap->iv_appie_probereq != NULL) 1869 frm = add_appie(frm, vap->iv_appie_probereq); 1870 m->m_pkthdr.len = m->m_len = frm - mtod(m, uint8_t *); 1871 1872 KASSERT(M_LEADINGSPACE(m) >= sizeof(struct ieee80211_frame), 1873 ("leading space %zd", M_LEADINGSPACE(m))); 1874 M_PREPEND(m, sizeof(struct ieee80211_frame), M_NOWAIT); 1875 if (m == NULL) { 1876 /* NB: cannot happen */ 1877 ieee80211_free_node(ni); 1878 return ENOMEM; 1879 } 1880 1881 wh = mtod(m, struct ieee80211_frame *); 1882 ieee80211_send_setup(ni, m, 1883 IEEE80211_FC0_TYPE_MGT | IEEE80211_FC0_SUBTYPE_PROBE_REQ, 1884 IEEE80211_NONQOS_TID, sa, da, bssid); 1885 /* XXX power management? */ 1886 m->m_flags |= M_ENCAP; /* mark encapsulated */ 1887 1888 M_WME_SETAC(m, WME_AC_BE); 1889 1890 IEEE80211_NODE_STAT(ni, tx_probereq); 1891 IEEE80211_NODE_STAT(ni, tx_mgmt); 1892 1893 IEEE80211_DPRINTF(vap, IEEE80211_MSG_DEBUG | IEEE80211_MSG_DUMPPKTS, 1894 "send probe req on channel %u bssid %s ssid \"%.*s\"\n", 1895 ieee80211_chan2ieee(ic, ic->ic_curchan), ether_sprintf(bssid), 1896 ssidlen, ssid); 1897 1898 memset(¶ms, 0, sizeof(params)); 1899 params.ibp_pri = M_WME_GETAC(m); 1900 tp = &vap->iv_txparms[ieee80211_chan2mode(ic->ic_curchan)]; 1901 params.ibp_rate0 = tp->mgmtrate; 1902 if (IEEE80211_IS_MULTICAST(da)) { 1903 params.ibp_flags |= IEEE80211_BPF_NOACK; 1904 params.ibp_try0 = 1; 1905 } else 1906 params.ibp_try0 = tp->maxretry; 1907 params.ibp_power = ni->ni_txpower; 1908 return ic->ic_raw_xmit(ni, m, ¶ms); 1909 } 1910 1911 /* 1912 * Calculate capability information for mgt frames. 1913 */ 1914 uint16_t 1915 ieee80211_getcapinfo(struct ieee80211vap *vap, struct ieee80211_channel *chan) 1916 { 1917 struct ieee80211com *ic = vap->iv_ic; 1918 uint16_t capinfo; 1919 1920 KASSERT(vap->iv_opmode != IEEE80211_M_STA, ("station mode")); 1921 1922 if (vap->iv_opmode == IEEE80211_M_HOSTAP) 1923 capinfo = IEEE80211_CAPINFO_ESS; 1924 else if (vap->iv_opmode == IEEE80211_M_IBSS) 1925 capinfo = IEEE80211_CAPINFO_IBSS; 1926 else 1927 capinfo = 0; 1928 if (vap->iv_flags & IEEE80211_F_PRIVACY) 1929 capinfo |= IEEE80211_CAPINFO_PRIVACY; 1930 if ((ic->ic_flags & IEEE80211_F_SHPREAMBLE) && 1931 IEEE80211_IS_CHAN_2GHZ(chan)) 1932 capinfo |= IEEE80211_CAPINFO_SHORT_PREAMBLE; 1933 if (ic->ic_flags & IEEE80211_F_SHSLOT) 1934 capinfo |= IEEE80211_CAPINFO_SHORT_SLOTTIME; 1935 if (IEEE80211_IS_CHAN_5GHZ(chan) && (vap->iv_flags & IEEE80211_F_DOTH)) 1936 capinfo |= IEEE80211_CAPINFO_SPECTRUM_MGMT; 1937 return capinfo; 1938 } 1939 1940 /* 1941 * Send a management frame. The node is for the destination (or ic_bss 1942 * when in station mode). Nodes other than ic_bss have their reference 1943 * count bumped to reflect our use for an indeterminant time. 1944 */ 1945 int 1946 ieee80211_send_mgmt(struct ieee80211_node *ni, int type, int arg) 1947 { 1948 #define HTFLAGS (IEEE80211_NODE_HT | IEEE80211_NODE_HTCOMPAT) 1949 #define senderr(_x, _v) do { vap->iv_stats._v++; ret = _x; goto bad; } while (0) 1950 struct ieee80211vap *vap = ni->ni_vap; 1951 struct ieee80211com *ic = ni->ni_ic; 1952 struct ieee80211_node *bss = vap->iv_bss; 1953 struct ieee80211_bpf_params params; 1954 struct mbuf *m; 1955 uint8_t *frm; 1956 uint16_t capinfo; 1957 int has_challenge, is_shared_key, ret, status; 1958 1959 KASSERT(ni != NULL, ("null node")); 1960 1961 /* 1962 * Hold a reference on the node so it doesn't go away until after 1963 * the xmit is complete all the way in the driver. On error we 1964 * will remove our reference. 1965 */ 1966 IEEE80211_DPRINTF(vap, IEEE80211_MSG_NODE, 1967 "ieee80211_ref_node (%s:%u) %p<%s> refcnt %d\n", 1968 __func__, __LINE__, 1969 ni, ether_sprintf(ni->ni_macaddr), 1970 ieee80211_node_refcnt(ni)+1); 1971 ieee80211_ref_node(ni); 1972 1973 memset(¶ms, 0, sizeof(params)); 1974 switch (type) { 1975 1976 case IEEE80211_FC0_SUBTYPE_AUTH: 1977 status = arg >> 16; 1978 arg &= 0xffff; 1979 has_challenge = ((arg == IEEE80211_AUTH_SHARED_CHALLENGE || 1980 arg == IEEE80211_AUTH_SHARED_RESPONSE) && 1981 ni->ni_challenge != NULL); 1982 1983 /* 1984 * Deduce whether we're doing open authentication or 1985 * shared key authentication. We do the latter if 1986 * we're in the middle of a shared key authentication 1987 * handshake or if we're initiating an authentication 1988 * request and configured to use shared key. 1989 */ 1990 is_shared_key = has_challenge || 1991 arg >= IEEE80211_AUTH_SHARED_RESPONSE || 1992 (arg == IEEE80211_AUTH_SHARED_REQUEST && 1993 bss->ni_authmode == IEEE80211_AUTH_SHARED); 1994 1995 m = ieee80211_getmgtframe(&frm, 1996 ic->ic_headroom + sizeof(struct ieee80211_frame), 1997 3 * sizeof(uint16_t) 1998 + (has_challenge && status == IEEE80211_STATUS_SUCCESS ? 1999 sizeof(uint16_t)+IEEE80211_CHALLENGE_LEN : 0) 2000 ); 2001 if (m == NULL) 2002 senderr(ENOMEM, is_tx_nobuf); 2003 2004 ((uint16_t *)frm)[0] = 2005 (is_shared_key) ? htole16(IEEE80211_AUTH_ALG_SHARED) 2006 : htole16(IEEE80211_AUTH_ALG_OPEN); 2007 ((uint16_t *)frm)[1] = htole16(arg); /* sequence number */ 2008 ((uint16_t *)frm)[2] = htole16(status);/* status */ 2009 2010 if (has_challenge && status == IEEE80211_STATUS_SUCCESS) { 2011 ((uint16_t *)frm)[3] = 2012 htole16((IEEE80211_CHALLENGE_LEN << 8) | 2013 IEEE80211_ELEMID_CHALLENGE); 2014 memcpy(&((uint16_t *)frm)[4], ni->ni_challenge, 2015 IEEE80211_CHALLENGE_LEN); 2016 m->m_pkthdr.len = m->m_len = 2017 4 * sizeof(uint16_t) + IEEE80211_CHALLENGE_LEN; 2018 if (arg == IEEE80211_AUTH_SHARED_RESPONSE) { 2019 IEEE80211_NOTE(vap, IEEE80211_MSG_AUTH, ni, 2020 "request encrypt frame (%s)", __func__); 2021 /* mark frame for encryption */ 2022 params.ibp_flags |= IEEE80211_BPF_CRYPTO; 2023 } 2024 } else 2025 m->m_pkthdr.len = m->m_len = 3 * sizeof(uint16_t); 2026 2027 /* XXX not right for shared key */ 2028 if (status == IEEE80211_STATUS_SUCCESS) 2029 IEEE80211_NODE_STAT(ni, tx_auth); 2030 else 2031 IEEE80211_NODE_STAT(ni, tx_auth_fail); 2032 2033 if (vap->iv_opmode == IEEE80211_M_STA) 2034 ieee80211_add_callback(m, ieee80211_tx_mgt_cb, 2035 (void *) vap->iv_state); 2036 break; 2037 2038 case IEEE80211_FC0_SUBTYPE_DEAUTH: 2039 IEEE80211_NOTE(vap, IEEE80211_MSG_AUTH, ni, 2040 "send station deauthenticate (reason %d)", arg); 2041 m = ieee80211_getmgtframe(&frm, 2042 ic->ic_headroom + sizeof(struct ieee80211_frame), 2043 sizeof(uint16_t)); 2044 if (m == NULL) 2045 senderr(ENOMEM, is_tx_nobuf); 2046 *(uint16_t *)frm = htole16(arg); /* reason */ 2047 m->m_pkthdr.len = m->m_len = sizeof(uint16_t); 2048 2049 IEEE80211_NODE_STAT(ni, tx_deauth); 2050 IEEE80211_NODE_STAT_SET(ni, tx_deauth_code, arg); 2051 2052 ieee80211_node_unauthorize(ni); /* port closed */ 2053 break; 2054 2055 case IEEE80211_FC0_SUBTYPE_ASSOC_REQ: 2056 case IEEE80211_FC0_SUBTYPE_REASSOC_REQ: 2057 /* 2058 * asreq frame format 2059 * [2] capability information 2060 * [2] listen interval 2061 * [6*] current AP address (reassoc only) 2062 * [tlv] ssid 2063 * [tlv] supported rates 2064 * [tlv] extended supported rates 2065 * [4] power capability (optional) 2066 * [28] supported channels (optional) 2067 * [tlv] HT capabilities 2068 * [tlv] WME (optional) 2069 * [tlv] Vendor OUI HT capabilities (optional) 2070 * [tlv] Atheros capabilities (if negotiated) 2071 * [tlv] AppIE's (optional) 2072 */ 2073 m = ieee80211_getmgtframe(&frm, 2074 ic->ic_headroom + sizeof(struct ieee80211_frame), 2075 sizeof(uint16_t) 2076 + sizeof(uint16_t) 2077 + IEEE80211_ADDR_LEN 2078 + 2 + IEEE80211_NWID_LEN 2079 + 2 + IEEE80211_RATE_SIZE 2080 + 2 + (IEEE80211_RATE_MAXSIZE - IEEE80211_RATE_SIZE) 2081 + 4 2082 + 2 + 26 2083 + sizeof(struct ieee80211_wme_info) 2084 + sizeof(struct ieee80211_ie_htcap) 2085 + 4 + sizeof(struct ieee80211_ie_htcap) 2086 #ifdef IEEE80211_SUPPORT_SUPERG 2087 + sizeof(struct ieee80211_ath_ie) 2088 #endif 2089 + (vap->iv_appie_wpa != NULL ? 2090 vap->iv_appie_wpa->ie_len : 0) 2091 + (vap->iv_appie_assocreq != NULL ? 2092 vap->iv_appie_assocreq->ie_len : 0) 2093 ); 2094 if (m == NULL) 2095 senderr(ENOMEM, is_tx_nobuf); 2096 2097 KASSERT(vap->iv_opmode == IEEE80211_M_STA, 2098 ("wrong mode %u", vap->iv_opmode)); 2099 capinfo = IEEE80211_CAPINFO_ESS; 2100 if (vap->iv_flags & IEEE80211_F_PRIVACY) 2101 capinfo |= IEEE80211_CAPINFO_PRIVACY; 2102 /* 2103 * NB: Some 11a AP's reject the request when 2104 * short premable is set. 2105 */ 2106 if ((ic->ic_flags & IEEE80211_F_SHPREAMBLE) && 2107 IEEE80211_IS_CHAN_2GHZ(ic->ic_curchan)) 2108 capinfo |= IEEE80211_CAPINFO_SHORT_PREAMBLE; 2109 if (IEEE80211_IS_CHAN_ANYG(ic->ic_curchan) && 2110 (ic->ic_caps & IEEE80211_C_SHSLOT)) 2111 capinfo |= IEEE80211_CAPINFO_SHORT_SLOTTIME; 2112 if ((ni->ni_capinfo & IEEE80211_CAPINFO_SPECTRUM_MGMT) && 2113 (vap->iv_flags & IEEE80211_F_DOTH)) 2114 capinfo |= IEEE80211_CAPINFO_SPECTRUM_MGMT; 2115 *(uint16_t *)frm = htole16(capinfo); 2116 frm += 2; 2117 2118 KASSERT(bss->ni_intval != 0, ("beacon interval is zero!")); 2119 *(uint16_t *)frm = htole16(howmany(ic->ic_lintval, 2120 bss->ni_intval)); 2121 frm += 2; 2122 2123 if (type == IEEE80211_FC0_SUBTYPE_REASSOC_REQ) { 2124 IEEE80211_ADDR_COPY(frm, bss->ni_bssid); 2125 frm += IEEE80211_ADDR_LEN; 2126 } 2127 2128 frm = ieee80211_add_ssid(frm, ni->ni_essid, ni->ni_esslen); 2129 frm = ieee80211_add_rates(frm, &ni->ni_rates); 2130 if (vap->iv_flags & IEEE80211_F_WPA2) { 2131 if (vap->iv_rsn_ie != NULL) 2132 frm = add_ie(frm, vap->iv_rsn_ie); 2133 /* XXX else complain? */ 2134 } 2135 frm = ieee80211_add_xrates(frm, &ni->ni_rates); 2136 if (capinfo & IEEE80211_CAPINFO_SPECTRUM_MGMT) { 2137 frm = ieee80211_add_powercapability(frm, 2138 ic->ic_curchan); 2139 frm = ieee80211_add_supportedchannels(frm, ic); 2140 } 2141 if ((vap->iv_flags_ht & IEEE80211_FHT_HT) && 2142 ni->ni_ies.htcap_ie != NULL && 2143 ni->ni_ies.htcap_ie[0] == IEEE80211_ELEMID_HTCAP) 2144 frm = ieee80211_add_htcap(frm, ni); 2145 if (vap->iv_flags & IEEE80211_F_WPA1) { 2146 if (vap->iv_wpa_ie != NULL) 2147 frm = add_ie(frm, vap->iv_wpa_ie); 2148 /* XXX else complain */ 2149 } 2150 if ((ic->ic_flags & IEEE80211_F_WME) && 2151 ni->ni_ies.wme_ie != NULL) 2152 frm = ieee80211_add_wme_info(frm, &ic->ic_wme); 2153 if ((vap->iv_flags_ht & IEEE80211_FHT_HT) && 2154 ni->ni_ies.htcap_ie != NULL && 2155 ni->ni_ies.htcap_ie[0] == IEEE80211_ELEMID_VENDOR) 2156 frm = ieee80211_add_htcap_vendor(frm, ni); 2157 #ifdef IEEE80211_SUPPORT_SUPERG 2158 if (IEEE80211_ATH_CAP(vap, ni, IEEE80211_F_ATHEROS)) { 2159 frm = ieee80211_add_ath(frm, 2160 IEEE80211_ATH_CAP(vap, ni, IEEE80211_F_ATHEROS), 2161 ((vap->iv_flags & IEEE80211_F_WPA) == 0 && 2162 ni->ni_authmode != IEEE80211_AUTH_8021X) ? 2163 vap->iv_def_txkey : IEEE80211_KEYIX_NONE); 2164 } 2165 #endif /* IEEE80211_SUPPORT_SUPERG */ 2166 if (vap->iv_appie_assocreq != NULL) 2167 frm = add_appie(frm, vap->iv_appie_assocreq); 2168 m->m_pkthdr.len = m->m_len = frm - mtod(m, uint8_t *); 2169 2170 ieee80211_add_callback(m, ieee80211_tx_mgt_cb, 2171 (void *) vap->iv_state); 2172 break; 2173 2174 case IEEE80211_FC0_SUBTYPE_ASSOC_RESP: 2175 case IEEE80211_FC0_SUBTYPE_REASSOC_RESP: 2176 /* 2177 * asresp frame format 2178 * [2] capability information 2179 * [2] status 2180 * [2] association ID 2181 * [tlv] supported rates 2182 * [tlv] extended supported rates 2183 * [tlv] HT capabilities (standard, if STA enabled) 2184 * [tlv] HT information (standard, if STA enabled) 2185 * [tlv] WME (if configured and STA enabled) 2186 * [tlv] HT capabilities (vendor OUI, if STA enabled) 2187 * [tlv] HT information (vendor OUI, if STA enabled) 2188 * [tlv] Atheros capabilities (if STA enabled) 2189 * [tlv] AppIE's (optional) 2190 */ 2191 m = ieee80211_getmgtframe(&frm, 2192 ic->ic_headroom + sizeof(struct ieee80211_frame), 2193 sizeof(uint16_t) 2194 + sizeof(uint16_t) 2195 + sizeof(uint16_t) 2196 + 2 + IEEE80211_RATE_SIZE 2197 + 2 + (IEEE80211_RATE_MAXSIZE - IEEE80211_RATE_SIZE) 2198 + sizeof(struct ieee80211_ie_htcap) + 4 2199 + sizeof(struct ieee80211_ie_htinfo) + 4 2200 + sizeof(struct ieee80211_wme_param) 2201 #ifdef IEEE80211_SUPPORT_SUPERG 2202 + sizeof(struct ieee80211_ath_ie) 2203 #endif 2204 + (vap->iv_appie_assocresp != NULL ? 2205 vap->iv_appie_assocresp->ie_len : 0) 2206 ); 2207 if (m == NULL) 2208 senderr(ENOMEM, is_tx_nobuf); 2209 2210 capinfo = ieee80211_getcapinfo(vap, bss->ni_chan); 2211 *(uint16_t *)frm = htole16(capinfo); 2212 frm += 2; 2213 2214 *(uint16_t *)frm = htole16(arg); /* status */ 2215 frm += 2; 2216 2217 if (arg == IEEE80211_STATUS_SUCCESS) { 2218 *(uint16_t *)frm = htole16(ni->ni_associd); 2219 IEEE80211_NODE_STAT(ni, tx_assoc); 2220 } else 2221 IEEE80211_NODE_STAT(ni, tx_assoc_fail); 2222 frm += 2; 2223 2224 frm = ieee80211_add_rates(frm, &ni->ni_rates); 2225 frm = ieee80211_add_xrates(frm, &ni->ni_rates); 2226 /* NB: respond according to what we received */ 2227 if ((ni->ni_flags & HTFLAGS) == IEEE80211_NODE_HT) { 2228 frm = ieee80211_add_htcap(frm, ni); 2229 frm = ieee80211_add_htinfo(frm, ni); 2230 } 2231 if ((vap->iv_flags & IEEE80211_F_WME) && 2232 ni->ni_ies.wme_ie != NULL) 2233 frm = ieee80211_add_wme_param(frm, &ic->ic_wme); 2234 if ((ni->ni_flags & HTFLAGS) == HTFLAGS) { 2235 frm = ieee80211_add_htcap_vendor(frm, ni); 2236 frm = ieee80211_add_htinfo_vendor(frm, ni); 2237 } 2238 #ifdef IEEE80211_SUPPORT_SUPERG 2239 if (IEEE80211_ATH_CAP(vap, ni, IEEE80211_F_ATHEROS)) 2240 frm = ieee80211_add_ath(frm, 2241 IEEE80211_ATH_CAP(vap, ni, IEEE80211_F_ATHEROS), 2242 ((vap->iv_flags & IEEE80211_F_WPA) == 0 && 2243 ni->ni_authmode != IEEE80211_AUTH_8021X) ? 2244 vap->iv_def_txkey : IEEE80211_KEYIX_NONE); 2245 #endif /* IEEE80211_SUPPORT_SUPERG */ 2246 if (vap->iv_appie_assocresp != NULL) 2247 frm = add_appie(frm, vap->iv_appie_assocresp); 2248 m->m_pkthdr.len = m->m_len = frm - mtod(m, uint8_t *); 2249 break; 2250 2251 case IEEE80211_FC0_SUBTYPE_DISASSOC: 2252 IEEE80211_NOTE(vap, IEEE80211_MSG_ASSOC, ni, 2253 "send station disassociate (reason %d)", arg); 2254 m = ieee80211_getmgtframe(&frm, 2255 ic->ic_headroom + sizeof(struct ieee80211_frame), 2256 sizeof(uint16_t)); 2257 if (m == NULL) 2258 senderr(ENOMEM, is_tx_nobuf); 2259 *(uint16_t *)frm = htole16(arg); /* reason */ 2260 m->m_pkthdr.len = m->m_len = sizeof(uint16_t); 2261 2262 IEEE80211_NODE_STAT(ni, tx_disassoc); 2263 IEEE80211_NODE_STAT_SET(ni, tx_disassoc_code, arg); 2264 break; 2265 2266 default: 2267 IEEE80211_NOTE(vap, IEEE80211_MSG_ANY, ni, 2268 "invalid mgmt frame type %u", type); 2269 senderr(EINVAL, is_tx_unknownmgt); 2270 /* NOTREACHED */ 2271 } 2272 2273 /* NB: force non-ProbeResp frames to the highest queue */ 2274 params.ibp_pri = WME_AC_VO; 2275 params.ibp_rate0 = bss->ni_txparms->mgmtrate; 2276 /* NB: we know all frames are unicast */ 2277 params.ibp_try0 = bss->ni_txparms->maxretry; 2278 params.ibp_power = bss->ni_txpower; 2279 return ieee80211_mgmt_output(ni, m, type, ¶ms); 2280 bad: 2281 ieee80211_free_node(ni); 2282 return ret; 2283 #undef senderr 2284 #undef HTFLAGS 2285 } 2286 2287 /* 2288 * Return an mbuf with a probe response frame in it. 2289 * Space is left to prepend and 802.11 header at the 2290 * front but it's left to the caller to fill in. 2291 */ 2292 struct mbuf * 2293 ieee80211_alloc_proberesp(struct ieee80211_node *bss, int legacy) 2294 { 2295 struct ieee80211vap *vap = bss->ni_vap; 2296 struct ieee80211com *ic = bss->ni_ic; 2297 const struct ieee80211_rateset *rs; 2298 struct mbuf *m; 2299 uint16_t capinfo; 2300 uint8_t *frm; 2301 2302 /* 2303 * probe response frame format 2304 * [8] time stamp 2305 * [2] beacon interval 2306 * [2] cabability information 2307 * [tlv] ssid 2308 * [tlv] supported rates 2309 * [tlv] parameter set (FH/DS) 2310 * [tlv] parameter set (IBSS) 2311 * [tlv] country (optional) 2312 * [3] power control (optional) 2313 * [5] channel switch announcement (CSA) (optional) 2314 * [tlv] extended rate phy (ERP) 2315 * [tlv] extended supported rates 2316 * [tlv] RSN (optional) 2317 * [tlv] HT capabilities 2318 * [tlv] HT information 2319 * [tlv] WPA (optional) 2320 * [tlv] WME (optional) 2321 * [tlv] Vendor OUI HT capabilities (optional) 2322 * [tlv] Vendor OUI HT information (optional) 2323 * [tlv] Atheros capabilities 2324 * [tlv] AppIE's (optional) 2325 * [tlv] Mesh ID (MBSS) 2326 * [tlv] Mesh Conf (MBSS) 2327 */ 2328 m = ieee80211_getmgtframe(&frm, 2329 ic->ic_headroom + sizeof(struct ieee80211_frame), 2330 8 2331 + sizeof(uint16_t) 2332 + sizeof(uint16_t) 2333 + 2 + IEEE80211_NWID_LEN 2334 + 2 + IEEE80211_RATE_SIZE 2335 + 7 /* max(7,3) */ 2336 + IEEE80211_COUNTRY_MAX_SIZE 2337 + 3 2338 + sizeof(struct ieee80211_csa_ie) 2339 + sizeof(struct ieee80211_quiet_ie) 2340 + 3 2341 + 2 + (IEEE80211_RATE_MAXSIZE - IEEE80211_RATE_SIZE) 2342 + sizeof(struct ieee80211_ie_wpa) 2343 + sizeof(struct ieee80211_ie_htcap) 2344 + sizeof(struct ieee80211_ie_htinfo) 2345 + sizeof(struct ieee80211_ie_wpa) 2346 + sizeof(struct ieee80211_wme_param) 2347 + 4 + sizeof(struct ieee80211_ie_htcap) 2348 + 4 + sizeof(struct ieee80211_ie_htinfo) 2349 #ifdef IEEE80211_SUPPORT_SUPERG 2350 + sizeof(struct ieee80211_ath_ie) 2351 #endif 2352 #ifdef IEEE80211_SUPPORT_MESH 2353 + 2 + IEEE80211_MESHID_LEN 2354 + sizeof(struct ieee80211_meshconf_ie) 2355 #endif 2356 + (vap->iv_appie_proberesp != NULL ? 2357 vap->iv_appie_proberesp->ie_len : 0) 2358 ); 2359 if (m == NULL) { 2360 vap->iv_stats.is_tx_nobuf++; 2361 return NULL; 2362 } 2363 2364 memset(frm, 0, 8); /* timestamp should be filled later */ 2365 frm += 8; 2366 *(uint16_t *)frm = htole16(bss->ni_intval); 2367 frm += 2; 2368 capinfo = ieee80211_getcapinfo(vap, bss->ni_chan); 2369 *(uint16_t *)frm = htole16(capinfo); 2370 frm += 2; 2371 2372 frm = ieee80211_add_ssid(frm, bss->ni_essid, bss->ni_esslen); 2373 rs = ieee80211_get_suprates(ic, bss->ni_chan); 2374 frm = ieee80211_add_rates(frm, rs); 2375 2376 if (IEEE80211_IS_CHAN_FHSS(bss->ni_chan)) { 2377 *frm++ = IEEE80211_ELEMID_FHPARMS; 2378 *frm++ = 5; 2379 *frm++ = bss->ni_fhdwell & 0x00ff; 2380 *frm++ = (bss->ni_fhdwell >> 8) & 0x00ff; 2381 *frm++ = IEEE80211_FH_CHANSET( 2382 ieee80211_chan2ieee(ic, bss->ni_chan)); 2383 *frm++ = IEEE80211_FH_CHANPAT( 2384 ieee80211_chan2ieee(ic, bss->ni_chan)); 2385 *frm++ = bss->ni_fhindex; 2386 } else { 2387 *frm++ = IEEE80211_ELEMID_DSPARMS; 2388 *frm++ = 1; 2389 *frm++ = ieee80211_chan2ieee(ic, bss->ni_chan); 2390 } 2391 2392 if (vap->iv_opmode == IEEE80211_M_IBSS) { 2393 *frm++ = IEEE80211_ELEMID_IBSSPARMS; 2394 *frm++ = 2; 2395 *frm++ = 0; *frm++ = 0; /* TODO: ATIM window */ 2396 } 2397 if ((vap->iv_flags & IEEE80211_F_DOTH) || 2398 (vap->iv_flags_ext & IEEE80211_FEXT_DOTD)) 2399 frm = ieee80211_add_countryie(frm, ic); 2400 if (vap->iv_flags & IEEE80211_F_DOTH) { 2401 if (IEEE80211_IS_CHAN_5GHZ(bss->ni_chan)) 2402 frm = ieee80211_add_powerconstraint(frm, vap); 2403 if (ic->ic_flags & IEEE80211_F_CSAPENDING) 2404 frm = ieee80211_add_csa(frm, vap); 2405 } 2406 if (vap->iv_flags & IEEE80211_F_DOTH) { 2407 if (IEEE80211_IS_CHAN_DFS(ic->ic_bsschan) && 2408 (vap->iv_flags_ext & IEEE80211_FEXT_DFS)) { 2409 if (vap->iv_quiet) 2410 frm = ieee80211_add_quiet(frm, vap); 2411 } 2412 } 2413 if (IEEE80211_IS_CHAN_ANYG(bss->ni_chan)) 2414 frm = ieee80211_add_erp(frm, ic); 2415 frm = ieee80211_add_xrates(frm, rs); 2416 if (vap->iv_flags & IEEE80211_F_WPA2) { 2417 if (vap->iv_rsn_ie != NULL) 2418 frm = add_ie(frm, vap->iv_rsn_ie); 2419 /* XXX else complain? */ 2420 } 2421 /* 2422 * NB: legacy 11b clients do not get certain ie's. 2423 * The caller identifies such clients by passing 2424 * a token in legacy to us. Could expand this to be 2425 * any legacy client for stuff like HT ie's. 2426 */ 2427 if (IEEE80211_IS_CHAN_HT(bss->ni_chan) && 2428 legacy != IEEE80211_SEND_LEGACY_11B) { 2429 frm = ieee80211_add_htcap(frm, bss); 2430 frm = ieee80211_add_htinfo(frm, bss); 2431 } 2432 if (vap->iv_flags & IEEE80211_F_WPA1) { 2433 if (vap->iv_wpa_ie != NULL) 2434 frm = add_ie(frm, vap->iv_wpa_ie); 2435 /* XXX else complain? */ 2436 } 2437 if (vap->iv_flags & IEEE80211_F_WME) 2438 frm = ieee80211_add_wme_param(frm, &ic->ic_wme); 2439 if (IEEE80211_IS_CHAN_HT(bss->ni_chan) && 2440 (vap->iv_flags_ht & IEEE80211_FHT_HTCOMPAT) && 2441 legacy != IEEE80211_SEND_LEGACY_11B) { 2442 frm = ieee80211_add_htcap_vendor(frm, bss); 2443 frm = ieee80211_add_htinfo_vendor(frm, bss); 2444 } 2445 #ifdef IEEE80211_SUPPORT_SUPERG 2446 if ((vap->iv_flags & IEEE80211_F_ATHEROS) && 2447 legacy != IEEE80211_SEND_LEGACY_11B) 2448 frm = ieee80211_add_athcaps(frm, bss); 2449 #endif 2450 if (vap->iv_appie_proberesp != NULL) 2451 frm = add_appie(frm, vap->iv_appie_proberesp); 2452 #ifdef IEEE80211_SUPPORT_MESH 2453 if (vap->iv_opmode == IEEE80211_M_MBSS) { 2454 frm = ieee80211_add_meshid(frm, vap); 2455 frm = ieee80211_add_meshconf(frm, vap); 2456 } 2457 #endif 2458 m->m_pkthdr.len = m->m_len = frm - mtod(m, uint8_t *); 2459 2460 return m; 2461 } 2462 2463 /* 2464 * Send a probe response frame to the specified mac address. 2465 * This does not go through the normal mgt frame api so we 2466 * can specify the destination address and re-use the bss node 2467 * for the sta reference. 2468 */ 2469 int 2470 ieee80211_send_proberesp(struct ieee80211vap *vap, 2471 const uint8_t da[IEEE80211_ADDR_LEN], int legacy) 2472 { 2473 struct ieee80211_node *bss = vap->iv_bss; 2474 struct ieee80211com *ic = vap->iv_ic; 2475 struct ieee80211_frame *wh; 2476 struct mbuf *m; 2477 2478 if (vap->iv_state == IEEE80211_S_CAC) { 2479 IEEE80211_NOTE(vap, IEEE80211_MSG_OUTPUT, bss, 2480 "block %s frame in CAC state", "probe response"); 2481 vap->iv_stats.is_tx_badstate++; 2482 return EIO; /* XXX */ 2483 } 2484 2485 /* 2486 * Hold a reference on the node so it doesn't go away until after 2487 * the xmit is complete all the way in the driver. On error we 2488 * will remove our reference. 2489 */ 2490 IEEE80211_DPRINTF(vap, IEEE80211_MSG_NODE, 2491 "ieee80211_ref_node (%s:%u) %p<%s> refcnt %d\n", 2492 __func__, __LINE__, bss, ether_sprintf(bss->ni_macaddr), 2493 ieee80211_node_refcnt(bss)+1); 2494 ieee80211_ref_node(bss); 2495 2496 m = ieee80211_alloc_proberesp(bss, legacy); 2497 if (m == NULL) { 2498 ieee80211_free_node(bss); 2499 return ENOMEM; 2500 } 2501 2502 M_PREPEND(m, sizeof(struct ieee80211_frame), M_NOWAIT); 2503 KASSERT(m != NULL, ("no room for header")); 2504 2505 wh = mtod(m, struct ieee80211_frame *); 2506 ieee80211_send_setup(bss, m, 2507 IEEE80211_FC0_TYPE_MGT | IEEE80211_FC0_SUBTYPE_PROBE_RESP, 2508 IEEE80211_NONQOS_TID, vap->iv_myaddr, da, bss->ni_bssid); 2509 /* XXX power management? */ 2510 m->m_flags |= M_ENCAP; /* mark encapsulated */ 2511 2512 M_WME_SETAC(m, WME_AC_BE); 2513 2514 IEEE80211_DPRINTF(vap, IEEE80211_MSG_DEBUG | IEEE80211_MSG_DUMPPKTS, 2515 "send probe resp on channel %u to %s%s\n", 2516 ieee80211_chan2ieee(ic, ic->ic_curchan), ether_sprintf(da), 2517 legacy ? " <legacy>" : ""); 2518 IEEE80211_NODE_STAT(bss, tx_mgmt); 2519 2520 return ic->ic_raw_xmit(bss, m, NULL); 2521 } 2522 2523 /* 2524 * Allocate and build a RTS (Request To Send) control frame. 2525 */ 2526 struct mbuf * 2527 ieee80211_alloc_rts(struct ieee80211com *ic, 2528 const uint8_t ra[IEEE80211_ADDR_LEN], 2529 const uint8_t ta[IEEE80211_ADDR_LEN], 2530 uint16_t dur) 2531 { 2532 struct ieee80211_frame_rts *rts; 2533 struct mbuf *m; 2534 2535 /* XXX honor ic_headroom */ 2536 m = m_gethdr(M_NOWAIT, MT_DATA); 2537 if (m != NULL) { 2538 rts = mtod(m, struct ieee80211_frame_rts *); 2539 rts->i_fc[0] = IEEE80211_FC0_VERSION_0 | 2540 IEEE80211_FC0_TYPE_CTL | IEEE80211_FC0_SUBTYPE_RTS; 2541 rts->i_fc[1] = IEEE80211_FC1_DIR_NODS; 2542 *(u_int16_t *)rts->i_dur = htole16(dur); 2543 IEEE80211_ADDR_COPY(rts->i_ra, ra); 2544 IEEE80211_ADDR_COPY(rts->i_ta, ta); 2545 2546 m->m_pkthdr.len = m->m_len = sizeof(struct ieee80211_frame_rts); 2547 } 2548 return m; 2549 } 2550 2551 /* 2552 * Allocate and build a CTS (Clear To Send) control frame. 2553 */ 2554 struct mbuf * 2555 ieee80211_alloc_cts(struct ieee80211com *ic, 2556 const uint8_t ra[IEEE80211_ADDR_LEN], uint16_t dur) 2557 { 2558 struct ieee80211_frame_cts *cts; 2559 struct mbuf *m; 2560 2561 /* XXX honor ic_headroom */ 2562 m = m_gethdr(M_NOWAIT, MT_DATA); 2563 if (m != NULL) { 2564 cts = mtod(m, struct ieee80211_frame_cts *); 2565 cts->i_fc[0] = IEEE80211_FC0_VERSION_0 | 2566 IEEE80211_FC0_TYPE_CTL | IEEE80211_FC0_SUBTYPE_CTS; 2567 cts->i_fc[1] = IEEE80211_FC1_DIR_NODS; 2568 *(u_int16_t *)cts->i_dur = htole16(dur); 2569 IEEE80211_ADDR_COPY(cts->i_ra, ra); 2570 2571 m->m_pkthdr.len = m->m_len = sizeof(struct ieee80211_frame_cts); 2572 } 2573 return m; 2574 } 2575 2576 static void 2577 ieee80211_tx_mgt_timeout(void *arg) 2578 { 2579 struct ieee80211_node *ni = arg; 2580 struct ieee80211vap *vap = ni->ni_vap; 2581 2582 if (vap->iv_state != IEEE80211_S_INIT && 2583 (vap->iv_ic->ic_flags & IEEE80211_F_SCAN) == 0) { 2584 /* 2585 * NB: it's safe to specify a timeout as the reason here; 2586 * it'll only be used in the right state. 2587 */ 2588 ieee80211_new_state(vap, IEEE80211_S_SCAN, 2589 IEEE80211_SCAN_FAIL_TIMEOUT); 2590 } 2591 } 2592 2593 static void 2594 ieee80211_tx_mgt_cb(struct ieee80211_node *ni, void *arg, int status) 2595 { 2596 struct ieee80211vap *vap = ni->ni_vap; 2597 enum ieee80211_state ostate = (enum ieee80211_state) arg; 2598 2599 /* 2600 * Frame transmit completed; arrange timer callback. If 2601 * transmit was successfuly we wait for response. Otherwise 2602 * we arrange an immediate callback instead of doing the 2603 * callback directly since we don't know what state the driver 2604 * is in (e.g. what locks it is holding). This work should 2605 * not be too time-critical and not happen too often so the 2606 * added overhead is acceptable. 2607 * 2608 * XXX what happens if !acked but response shows up before callback? 2609 */ 2610 if (vap->iv_state == ostate) 2611 callout_reset(&vap->iv_mgtsend, 2612 status == 0 ? IEEE80211_TRANS_WAIT*hz : 0, 2613 ieee80211_tx_mgt_timeout, ni); 2614 } 2615 2616 static void 2617 ieee80211_beacon_construct(struct mbuf *m, uint8_t *frm, 2618 struct ieee80211_beacon_offsets *bo, struct ieee80211_node *ni) 2619 { 2620 struct ieee80211vap *vap = ni->ni_vap; 2621 struct ieee80211com *ic = ni->ni_ic; 2622 struct ieee80211_rateset *rs = &ni->ni_rates; 2623 uint16_t capinfo; 2624 2625 /* 2626 * beacon frame format 2627 * [8] time stamp 2628 * [2] beacon interval 2629 * [2] cabability information 2630 * [tlv] ssid 2631 * [tlv] supported rates 2632 * [3] parameter set (DS) 2633 * [8] CF parameter set (optional) 2634 * [tlv] parameter set (IBSS/TIM) 2635 * [tlv] country (optional) 2636 * [3] power control (optional) 2637 * [5] channel switch announcement (CSA) (optional) 2638 * [tlv] extended rate phy (ERP) 2639 * [tlv] extended supported rates 2640 * [tlv] RSN parameters 2641 * [tlv] HT capabilities 2642 * [tlv] HT information 2643 * XXX Vendor-specific OIDs (e.g. Atheros) 2644 * [tlv] WPA parameters 2645 * [tlv] WME parameters 2646 * [tlv] Vendor OUI HT capabilities (optional) 2647 * [tlv] Vendor OUI HT information (optional) 2648 * [tlv] Atheros capabilities (optional) 2649 * [tlv] TDMA parameters (optional) 2650 * [tlv] Mesh ID (MBSS) 2651 * [tlv] Mesh Conf (MBSS) 2652 * [tlv] application data (optional) 2653 */ 2654 2655 memset(bo, 0, sizeof(*bo)); 2656 2657 memset(frm, 0, 8); /* XXX timestamp is set by hardware/driver */ 2658 frm += 8; 2659 *(uint16_t *)frm = htole16(ni->ni_intval); 2660 frm += 2; 2661 capinfo = ieee80211_getcapinfo(vap, ni->ni_chan); 2662 bo->bo_caps = (uint16_t *)frm; 2663 *(uint16_t *)frm = htole16(capinfo); 2664 frm += 2; 2665 *frm++ = IEEE80211_ELEMID_SSID; 2666 if ((vap->iv_flags & IEEE80211_F_HIDESSID) == 0) { 2667 *frm++ = ni->ni_esslen; 2668 memcpy(frm, ni->ni_essid, ni->ni_esslen); 2669 frm += ni->ni_esslen; 2670 } else 2671 *frm++ = 0; 2672 frm = ieee80211_add_rates(frm, rs); 2673 if (!IEEE80211_IS_CHAN_FHSS(ni->ni_chan)) { 2674 *frm++ = IEEE80211_ELEMID_DSPARMS; 2675 *frm++ = 1; 2676 *frm++ = ieee80211_chan2ieee(ic, ni->ni_chan); 2677 } 2678 if (ic->ic_flags & IEEE80211_F_PCF) { 2679 bo->bo_cfp = frm; 2680 frm = ieee80211_add_cfparms(frm, ic); 2681 } 2682 bo->bo_tim = frm; 2683 if (vap->iv_opmode == IEEE80211_M_IBSS) { 2684 *frm++ = IEEE80211_ELEMID_IBSSPARMS; 2685 *frm++ = 2; 2686 *frm++ = 0; *frm++ = 0; /* TODO: ATIM window */ 2687 bo->bo_tim_len = 0; 2688 } else if (vap->iv_opmode == IEEE80211_M_HOSTAP || 2689 vap->iv_opmode == IEEE80211_M_MBSS) { 2690 /* TIM IE is the same for Mesh and Hostap */ 2691 struct ieee80211_tim_ie *tie = (struct ieee80211_tim_ie *) frm; 2692 2693 tie->tim_ie = IEEE80211_ELEMID_TIM; 2694 tie->tim_len = 4; /* length */ 2695 tie->tim_count = 0; /* DTIM count */ 2696 tie->tim_period = vap->iv_dtim_period; /* DTIM period */ 2697 tie->tim_bitctl = 0; /* bitmap control */ 2698 tie->tim_bitmap[0] = 0; /* Partial Virtual Bitmap */ 2699 frm += sizeof(struct ieee80211_tim_ie); 2700 bo->bo_tim_len = 1; 2701 } 2702 bo->bo_tim_trailer = frm; 2703 if ((vap->iv_flags & IEEE80211_F_DOTH) || 2704 (vap->iv_flags_ext & IEEE80211_FEXT_DOTD)) 2705 frm = ieee80211_add_countryie(frm, ic); 2706 if (vap->iv_flags & IEEE80211_F_DOTH) { 2707 if (IEEE80211_IS_CHAN_5GHZ(ni->ni_chan)) 2708 frm = ieee80211_add_powerconstraint(frm, vap); 2709 bo->bo_csa = frm; 2710 if (ic->ic_flags & IEEE80211_F_CSAPENDING) 2711 frm = ieee80211_add_csa(frm, vap); 2712 } else 2713 bo->bo_csa = frm; 2714 2715 if (vap->iv_flags & IEEE80211_F_DOTH) { 2716 bo->bo_quiet = frm; 2717 if (IEEE80211_IS_CHAN_DFS(ic->ic_bsschan) && 2718 (vap->iv_flags_ext & IEEE80211_FEXT_DFS)) { 2719 if (vap->iv_quiet) 2720 frm = ieee80211_add_quiet(frm,vap); 2721 } 2722 } else 2723 bo->bo_quiet = frm; 2724 2725 if (IEEE80211_IS_CHAN_ANYG(ni->ni_chan)) { 2726 bo->bo_erp = frm; 2727 frm = ieee80211_add_erp(frm, ic); 2728 } 2729 frm = ieee80211_add_xrates(frm, rs); 2730 if (vap->iv_flags & IEEE80211_F_WPA2) { 2731 if (vap->iv_rsn_ie != NULL) 2732 frm = add_ie(frm, vap->iv_rsn_ie); 2733 /* XXX else complain */ 2734 } 2735 if (IEEE80211_IS_CHAN_HT(ni->ni_chan)) { 2736 frm = ieee80211_add_htcap(frm, ni); 2737 bo->bo_htinfo = frm; 2738 frm = ieee80211_add_htinfo(frm, ni); 2739 } 2740 if (vap->iv_flags & IEEE80211_F_WPA1) { 2741 if (vap->iv_wpa_ie != NULL) 2742 frm = add_ie(frm, vap->iv_wpa_ie); 2743 /* XXX else complain */ 2744 } 2745 if (vap->iv_flags & IEEE80211_F_WME) { 2746 bo->bo_wme = frm; 2747 frm = ieee80211_add_wme_param(frm, &ic->ic_wme); 2748 } 2749 if (IEEE80211_IS_CHAN_HT(ni->ni_chan) && 2750 (vap->iv_flags_ht & IEEE80211_FHT_HTCOMPAT)) { 2751 frm = ieee80211_add_htcap_vendor(frm, ni); 2752 frm = ieee80211_add_htinfo_vendor(frm, ni); 2753 } 2754 #ifdef IEEE80211_SUPPORT_SUPERG 2755 if (vap->iv_flags & IEEE80211_F_ATHEROS) { 2756 bo->bo_ath = frm; 2757 frm = ieee80211_add_athcaps(frm, ni); 2758 } 2759 #endif 2760 #ifdef IEEE80211_SUPPORT_TDMA 2761 if (vap->iv_caps & IEEE80211_C_TDMA) { 2762 bo->bo_tdma = frm; 2763 frm = ieee80211_add_tdma(frm, vap); 2764 } 2765 #endif 2766 if (vap->iv_appie_beacon != NULL) { 2767 bo->bo_appie = frm; 2768 bo->bo_appie_len = vap->iv_appie_beacon->ie_len; 2769 frm = add_appie(frm, vap->iv_appie_beacon); 2770 } 2771 #ifdef IEEE80211_SUPPORT_MESH 2772 if (vap->iv_opmode == IEEE80211_M_MBSS) { 2773 frm = ieee80211_add_meshid(frm, vap); 2774 bo->bo_meshconf = frm; 2775 frm = ieee80211_add_meshconf(frm, vap); 2776 } 2777 #endif 2778 bo->bo_tim_trailer_len = frm - bo->bo_tim_trailer; 2779 bo->bo_csa_trailer_len = frm - bo->bo_csa; 2780 m->m_pkthdr.len = m->m_len = frm - mtod(m, uint8_t *); 2781 } 2782 2783 /* 2784 * Allocate a beacon frame and fillin the appropriate bits. 2785 */ 2786 struct mbuf * 2787 ieee80211_beacon_alloc(struct ieee80211_node *ni, 2788 struct ieee80211_beacon_offsets *bo) 2789 { 2790 struct ieee80211vap *vap = ni->ni_vap; 2791 struct ieee80211com *ic = ni->ni_ic; 2792 struct ifnet *ifp = vap->iv_ifp; 2793 struct ieee80211_frame *wh; 2794 struct mbuf *m; 2795 int pktlen; 2796 uint8_t *frm; 2797 2798 /* 2799 * beacon frame format 2800 * [8] time stamp 2801 * [2] beacon interval 2802 * [2] cabability information 2803 * [tlv] ssid 2804 * [tlv] supported rates 2805 * [3] parameter set (DS) 2806 * [8] CF parameter set (optional) 2807 * [tlv] parameter set (IBSS/TIM) 2808 * [tlv] country (optional) 2809 * [3] power control (optional) 2810 * [5] channel switch announcement (CSA) (optional) 2811 * [tlv] extended rate phy (ERP) 2812 * [tlv] extended supported rates 2813 * [tlv] RSN parameters 2814 * [tlv] HT capabilities 2815 * [tlv] HT information 2816 * [tlv] Vendor OUI HT capabilities (optional) 2817 * [tlv] Vendor OUI HT information (optional) 2818 * XXX Vendor-specific OIDs (e.g. Atheros) 2819 * [tlv] WPA parameters 2820 * [tlv] WME parameters 2821 * [tlv] TDMA parameters (optional) 2822 * [tlv] Mesh ID (MBSS) 2823 * [tlv] Mesh Conf (MBSS) 2824 * [tlv] application data (optional) 2825 * NB: we allocate the max space required for the TIM bitmap. 2826 * XXX how big is this? 2827 */ 2828 pktlen = 8 /* time stamp */ 2829 + sizeof(uint16_t) /* beacon interval */ 2830 + sizeof(uint16_t) /* capabilities */ 2831 + 2 + ni->ni_esslen /* ssid */ 2832 + 2 + IEEE80211_RATE_SIZE /* supported rates */ 2833 + 2 + 1 /* DS parameters */ 2834 + 2 + 6 /* CF parameters */ 2835 + 2 + 4 + vap->iv_tim_len /* DTIM/IBSSPARMS */ 2836 + IEEE80211_COUNTRY_MAX_SIZE /* country */ 2837 + 2 + 1 /* power control */ 2838 + sizeof(struct ieee80211_csa_ie) /* CSA */ 2839 + sizeof(struct ieee80211_quiet_ie) /* Quiet */ 2840 + 2 + 1 /* ERP */ 2841 + 2 + (IEEE80211_RATE_MAXSIZE - IEEE80211_RATE_SIZE) 2842 + (vap->iv_caps & IEEE80211_C_WPA ? /* WPA 1+2 */ 2843 2*sizeof(struct ieee80211_ie_wpa) : 0) 2844 /* XXX conditional? */ 2845 + 4+2*sizeof(struct ieee80211_ie_htcap)/* HT caps */ 2846 + 4+2*sizeof(struct ieee80211_ie_htinfo)/* HT info */ 2847 + (vap->iv_caps & IEEE80211_C_WME ? /* WME */ 2848 sizeof(struct ieee80211_wme_param) : 0) 2849 #ifdef IEEE80211_SUPPORT_SUPERG 2850 + sizeof(struct ieee80211_ath_ie) /* ATH */ 2851 #endif 2852 #ifdef IEEE80211_SUPPORT_TDMA 2853 + (vap->iv_caps & IEEE80211_C_TDMA ? /* TDMA */ 2854 sizeof(struct ieee80211_tdma_param) : 0) 2855 #endif 2856 #ifdef IEEE80211_SUPPORT_MESH 2857 + 2 + ni->ni_meshidlen 2858 + sizeof(struct ieee80211_meshconf_ie) 2859 #endif 2860 + IEEE80211_MAX_APPIE 2861 ; 2862 m = ieee80211_getmgtframe(&frm, 2863 ic->ic_headroom + sizeof(struct ieee80211_frame), pktlen); 2864 if (m == NULL) { 2865 IEEE80211_DPRINTF(vap, IEEE80211_MSG_ANY, 2866 "%s: cannot get buf; size %u\n", __func__, pktlen); 2867 vap->iv_stats.is_tx_nobuf++; 2868 return NULL; 2869 } 2870 ieee80211_beacon_construct(m, frm, bo, ni); 2871 2872 M_PREPEND(m, sizeof(struct ieee80211_frame), M_NOWAIT); 2873 KASSERT(m != NULL, ("no space for 802.11 header?")); 2874 wh = mtod(m, struct ieee80211_frame *); 2875 wh->i_fc[0] = IEEE80211_FC0_VERSION_0 | IEEE80211_FC0_TYPE_MGT | 2876 IEEE80211_FC0_SUBTYPE_BEACON; 2877 wh->i_fc[1] = IEEE80211_FC1_DIR_NODS; 2878 *(uint16_t *)wh->i_dur = 0; 2879 IEEE80211_ADDR_COPY(wh->i_addr1, ifp->if_broadcastaddr); 2880 IEEE80211_ADDR_COPY(wh->i_addr2, vap->iv_myaddr); 2881 IEEE80211_ADDR_COPY(wh->i_addr3, ni->ni_bssid); 2882 *(uint16_t *)wh->i_seq = 0; 2883 2884 return m; 2885 } 2886 2887 /* 2888 * Update the dynamic parts of a beacon frame based on the current state. 2889 */ 2890 int 2891 ieee80211_beacon_update(struct ieee80211_node *ni, 2892 struct ieee80211_beacon_offsets *bo, struct mbuf *m, int mcast) 2893 { 2894 struct ieee80211vap *vap = ni->ni_vap; 2895 struct ieee80211com *ic = ni->ni_ic; 2896 int len_changed = 0; 2897 uint16_t capinfo; 2898 struct ieee80211_frame *wh; 2899 ieee80211_seq seqno; 2900 2901 IEEE80211_LOCK(ic); 2902 /* 2903 * Handle 11h channel change when we've reached the count. 2904 * We must recalculate the beacon frame contents to account 2905 * for the new channel. Note we do this only for the first 2906 * vap that reaches this point; subsequent vaps just update 2907 * their beacon state to reflect the recalculated channel. 2908 */ 2909 if (isset(bo->bo_flags, IEEE80211_BEACON_CSA) && 2910 vap->iv_csa_count == ic->ic_csa_count) { 2911 vap->iv_csa_count = 0; 2912 /* 2913 * Effect channel change before reconstructing the beacon 2914 * frame contents as many places reference ni_chan. 2915 */ 2916 if (ic->ic_csa_newchan != NULL) 2917 ieee80211_csa_completeswitch(ic); 2918 /* 2919 * NB: ieee80211_beacon_construct clears all pending 2920 * updates in bo_flags so we don't need to explicitly 2921 * clear IEEE80211_BEACON_CSA. 2922 */ 2923 ieee80211_beacon_construct(m, 2924 mtod(m, uint8_t*) + sizeof(struct ieee80211_frame), bo, ni); 2925 2926 /* XXX do WME aggressive mode processing? */ 2927 IEEE80211_UNLOCK(ic); 2928 return 1; /* just assume length changed */ 2929 } 2930 2931 wh = mtod(m, struct ieee80211_frame *); 2932 seqno = ni->ni_txseqs[IEEE80211_NONQOS_TID]++; 2933 *(uint16_t *)&wh->i_seq[0] = 2934 htole16(seqno << IEEE80211_SEQ_SEQ_SHIFT); 2935 M_SEQNO_SET(m, seqno); 2936 2937 /* XXX faster to recalculate entirely or just changes? */ 2938 capinfo = ieee80211_getcapinfo(vap, ni->ni_chan); 2939 *bo->bo_caps = htole16(capinfo); 2940 2941 if (vap->iv_flags & IEEE80211_F_WME) { 2942 struct ieee80211_wme_state *wme = &ic->ic_wme; 2943 2944 /* 2945 * Check for agressive mode change. When there is 2946 * significant high priority traffic in the BSS 2947 * throttle back BE traffic by using conservative 2948 * parameters. Otherwise BE uses agressive params 2949 * to optimize performance of legacy/non-QoS traffic. 2950 */ 2951 if (wme->wme_flags & WME_F_AGGRMODE) { 2952 if (wme->wme_hipri_traffic > 2953 wme->wme_hipri_switch_thresh) { 2954 IEEE80211_DPRINTF(vap, IEEE80211_MSG_WME, 2955 "%s: traffic %u, disable aggressive mode\n", 2956 __func__, wme->wme_hipri_traffic); 2957 wme->wme_flags &= ~WME_F_AGGRMODE; 2958 ieee80211_wme_updateparams_locked(vap); 2959 wme->wme_hipri_traffic = 2960 wme->wme_hipri_switch_hysteresis; 2961 } else 2962 wme->wme_hipri_traffic = 0; 2963 } else { 2964 if (wme->wme_hipri_traffic <= 2965 wme->wme_hipri_switch_thresh) { 2966 IEEE80211_DPRINTF(vap, IEEE80211_MSG_WME, 2967 "%s: traffic %u, enable aggressive mode\n", 2968 __func__, wme->wme_hipri_traffic); 2969 wme->wme_flags |= WME_F_AGGRMODE; 2970 ieee80211_wme_updateparams_locked(vap); 2971 wme->wme_hipri_traffic = 0; 2972 } else 2973 wme->wme_hipri_traffic = 2974 wme->wme_hipri_switch_hysteresis; 2975 } 2976 if (isset(bo->bo_flags, IEEE80211_BEACON_WME)) { 2977 (void) ieee80211_add_wme_param(bo->bo_wme, wme); 2978 clrbit(bo->bo_flags, IEEE80211_BEACON_WME); 2979 } 2980 } 2981 2982 if (isset(bo->bo_flags, IEEE80211_BEACON_HTINFO)) { 2983 ieee80211_ht_update_beacon(vap, bo); 2984 clrbit(bo->bo_flags, IEEE80211_BEACON_HTINFO); 2985 } 2986 #ifdef IEEE80211_SUPPORT_TDMA 2987 if (vap->iv_caps & IEEE80211_C_TDMA) { 2988 /* 2989 * NB: the beacon is potentially updated every TBTT. 2990 */ 2991 ieee80211_tdma_update_beacon(vap, bo); 2992 } 2993 #endif 2994 #ifdef IEEE80211_SUPPORT_MESH 2995 if (vap->iv_opmode == IEEE80211_M_MBSS) 2996 ieee80211_mesh_update_beacon(vap, bo); 2997 #endif 2998 2999 if (vap->iv_opmode == IEEE80211_M_HOSTAP || 3000 vap->iv_opmode == IEEE80211_M_MBSS) { /* NB: no IBSS support*/ 3001 struct ieee80211_tim_ie *tie = 3002 (struct ieee80211_tim_ie *) bo->bo_tim; 3003 if (isset(bo->bo_flags, IEEE80211_BEACON_TIM)) { 3004 u_int timlen, timoff, i; 3005 /* 3006 * ATIM/DTIM needs updating. If it fits in the 3007 * current space allocated then just copy in the 3008 * new bits. Otherwise we need to move any trailing 3009 * data to make room. Note that we know there is 3010 * contiguous space because ieee80211_beacon_allocate 3011 * insures there is space in the mbuf to write a 3012 * maximal-size virtual bitmap (based on iv_max_aid). 3013 */ 3014 /* 3015 * Calculate the bitmap size and offset, copy any 3016 * trailer out of the way, and then copy in the 3017 * new bitmap and update the information element. 3018 * Note that the tim bitmap must contain at least 3019 * one byte and any offset must be even. 3020 */ 3021 if (vap->iv_ps_pending != 0) { 3022 timoff = 128; /* impossibly large */ 3023 for (i = 0; i < vap->iv_tim_len; i++) 3024 if (vap->iv_tim_bitmap[i]) { 3025 timoff = i &~ 1; 3026 break; 3027 } 3028 KASSERT(timoff != 128, ("tim bitmap empty!")); 3029 for (i = vap->iv_tim_len-1; i >= timoff; i--) 3030 if (vap->iv_tim_bitmap[i]) 3031 break; 3032 timlen = 1 + (i - timoff); 3033 } else { 3034 timoff = 0; 3035 timlen = 1; 3036 } 3037 if (timlen != bo->bo_tim_len) { 3038 /* copy up/down trailer */ 3039 int adjust = tie->tim_bitmap+timlen 3040 - bo->bo_tim_trailer; 3041 ovbcopy(bo->bo_tim_trailer, 3042 bo->bo_tim_trailer+adjust, 3043 bo->bo_tim_trailer_len); 3044 bo->bo_tim_trailer += adjust; 3045 bo->bo_erp += adjust; 3046 bo->bo_htinfo += adjust; 3047 #ifdef IEEE80211_SUPPORT_SUPERG 3048 bo->bo_ath += adjust; 3049 #endif 3050 #ifdef IEEE80211_SUPPORT_TDMA 3051 bo->bo_tdma += adjust; 3052 #endif 3053 #ifdef IEEE80211_SUPPORT_MESH 3054 bo->bo_meshconf += adjust; 3055 #endif 3056 bo->bo_appie += adjust; 3057 bo->bo_wme += adjust; 3058 bo->bo_csa += adjust; 3059 bo->bo_quiet += adjust; 3060 bo->bo_tim_len = timlen; 3061 3062 /* update information element */ 3063 tie->tim_len = 3 + timlen; 3064 tie->tim_bitctl = timoff; 3065 len_changed = 1; 3066 } 3067 memcpy(tie->tim_bitmap, vap->iv_tim_bitmap + timoff, 3068 bo->bo_tim_len); 3069 3070 clrbit(bo->bo_flags, IEEE80211_BEACON_TIM); 3071 3072 IEEE80211_DPRINTF(vap, IEEE80211_MSG_POWER, 3073 "%s: TIM updated, pending %u, off %u, len %u\n", 3074 __func__, vap->iv_ps_pending, timoff, timlen); 3075 } 3076 /* count down DTIM period */ 3077 if (tie->tim_count == 0) 3078 tie->tim_count = tie->tim_period - 1; 3079 else 3080 tie->tim_count--; 3081 /* update state for buffered multicast frames on DTIM */ 3082 if (mcast && tie->tim_count == 0) 3083 tie->tim_bitctl |= 1; 3084 else 3085 tie->tim_bitctl &= ~1; 3086 if (isset(bo->bo_flags, IEEE80211_BEACON_CSA)) { 3087 struct ieee80211_csa_ie *csa = 3088 (struct ieee80211_csa_ie *) bo->bo_csa; 3089 3090 /* 3091 * Insert or update CSA ie. If we're just starting 3092 * to count down to the channel switch then we need 3093 * to insert the CSA ie. Otherwise we just need to 3094 * drop the count. The actual change happens above 3095 * when the vap's count reaches the target count. 3096 */ 3097 if (vap->iv_csa_count == 0) { 3098 memmove(&csa[1], csa, bo->bo_csa_trailer_len); 3099 bo->bo_erp += sizeof(*csa); 3100 bo->bo_htinfo += sizeof(*csa); 3101 bo->bo_wme += sizeof(*csa); 3102 #ifdef IEEE80211_SUPPORT_SUPERG 3103 bo->bo_ath += sizeof(*csa); 3104 #endif 3105 #ifdef IEEE80211_SUPPORT_TDMA 3106 bo->bo_tdma += sizeof(*csa); 3107 #endif 3108 #ifdef IEEE80211_SUPPORT_MESH 3109 bo->bo_meshconf += sizeof(*csa); 3110 #endif 3111 bo->bo_appie += sizeof(*csa); 3112 bo->bo_csa_trailer_len += sizeof(*csa); 3113 bo->bo_quiet += sizeof(*csa); 3114 bo->bo_tim_trailer_len += sizeof(*csa); 3115 m->m_len += sizeof(*csa); 3116 m->m_pkthdr.len += sizeof(*csa); 3117 3118 ieee80211_add_csa(bo->bo_csa, vap); 3119 } else 3120 csa->csa_count--; 3121 vap->iv_csa_count++; 3122 /* NB: don't clear IEEE80211_BEACON_CSA */ 3123 } 3124 if (IEEE80211_IS_CHAN_DFS(ic->ic_bsschan) && 3125 (vap->iv_flags_ext & IEEE80211_FEXT_DFS) ){ 3126 if (vap->iv_quiet) 3127 ieee80211_add_quiet(bo->bo_quiet, vap); 3128 } 3129 if (isset(bo->bo_flags, IEEE80211_BEACON_ERP)) { 3130 /* 3131 * ERP element needs updating. 3132 */ 3133 (void) ieee80211_add_erp(bo->bo_erp, ic); 3134 clrbit(bo->bo_flags, IEEE80211_BEACON_ERP); 3135 } 3136 #ifdef IEEE80211_SUPPORT_SUPERG 3137 if (isset(bo->bo_flags, IEEE80211_BEACON_ATH)) { 3138 ieee80211_add_athcaps(bo->bo_ath, ni); 3139 clrbit(bo->bo_flags, IEEE80211_BEACON_ATH); 3140 } 3141 #endif 3142 } 3143 if (isset(bo->bo_flags, IEEE80211_BEACON_APPIE)) { 3144 const struct ieee80211_appie *aie = vap->iv_appie_beacon; 3145 int aielen; 3146 uint8_t *frm; 3147 3148 aielen = 0; 3149 if (aie != NULL) 3150 aielen += aie->ie_len; 3151 if (aielen != bo->bo_appie_len) { 3152 /* copy up/down trailer */ 3153 int adjust = aielen - bo->bo_appie_len; 3154 ovbcopy(bo->bo_tim_trailer, bo->bo_tim_trailer+adjust, 3155 bo->bo_tim_trailer_len); 3156 bo->bo_tim_trailer += adjust; 3157 bo->bo_appie += adjust; 3158 bo->bo_appie_len = aielen; 3159 3160 len_changed = 1; 3161 } 3162 frm = bo->bo_appie; 3163 if (aie != NULL) 3164 frm = add_appie(frm, aie); 3165 clrbit(bo->bo_flags, IEEE80211_BEACON_APPIE); 3166 } 3167 IEEE80211_UNLOCK(ic); 3168 3169 return len_changed; 3170 } 3171