1 /*- 2 * SPDX-License-Identifier: BSD-2-Clause 3 * 4 * Copyright (c) 2001 Atsushi Onoe 5 * Copyright (c) 2002-2009 Sam Leffler, Errno Consulting 6 * All rights reserved. 7 * 8 * Redistribution and use in source and binary forms, with or without 9 * modification, are permitted provided that the following conditions 10 * are met: 11 * 1. Redistributions of source code must retain the above copyright 12 * notice, this list of conditions and the following disclaimer. 13 * 2. Redistributions in binary form must reproduce the above copyright 14 * notice, this list of conditions and the following disclaimer in the 15 * documentation and/or other materials provided with the distribution. 16 * 17 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR 18 * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES 19 * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. 20 * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, 21 * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT 22 * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, 23 * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY 24 * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT 25 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF 26 * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. 27 */ 28 29 #include <sys/cdefs.h> 30 #include "opt_wlan.h" 31 32 #include <sys/param.h> 33 #include <sys/systm.h> 34 #include <sys/mbuf.h> 35 #include <sys/malloc.h> 36 #include <sys/kernel.h> 37 38 #include <sys/socket.h> 39 40 #include <net/if.h> 41 #include <net/if_var.h> 42 #include <net/if_media.h> 43 #include <net/ethernet.h> 44 45 #include <net80211/ieee80211_var.h> 46 #include <net80211/ieee80211_input.h> 47 #ifdef IEEE80211_SUPPORT_SUPERG 48 #include <net80211/ieee80211_superg.h> 49 #endif 50 #ifdef IEEE80211_SUPPORT_TDMA 51 #include <net80211/ieee80211_tdma.h> 52 #endif 53 #include <net80211/ieee80211_wds.h> 54 #include <net80211/ieee80211_mesh.h> 55 #include <net80211/ieee80211_ratectl.h> 56 #include <net80211/ieee80211_vht.h> 57 58 #include <net/bpf.h> 59 60 #ifdef IEEE80211_DEBUG_REFCNT 61 #define __debrefcnt_used 62 #else 63 #define __debrefcnt_used __unused 64 #endif 65 66 /* 67 * IEEE80211_NODE_HASHSIZE must be a power of 2. 68 */ 69 CTASSERT((IEEE80211_NODE_HASHSIZE & (IEEE80211_NODE_HASHSIZE-1)) == 0); 70 71 /* 72 * Association id's are managed with a bit vector. 73 */ 74 #define IEEE80211_AID_SET(_vap, b) \ 75 ((_vap)->iv_aid_bitmap[IEEE80211_AID(b) / 32] |= \ 76 (1 << (IEEE80211_AID(b) % 32))) 77 #define IEEE80211_AID_CLR(_vap, b) \ 78 ((_vap)->iv_aid_bitmap[IEEE80211_AID(b) / 32] &= \ 79 ~(1 << (IEEE80211_AID(b) % 32))) 80 #define IEEE80211_AID_ISSET(_vap, b) \ 81 ((_vap)->iv_aid_bitmap[IEEE80211_AID(b) / 32] & (1 << (IEEE80211_AID(b) % 32))) 82 83 static int ieee80211_sta_join1(struct ieee80211_node *); 84 85 static struct ieee80211_node *ieee80211_alloc_node( 86 struct ieee80211_node_table *, struct ieee80211vap *, 87 const uint8_t macaddr[IEEE80211_ADDR_LEN], const char *, int); 88 static struct ieee80211_node *node_alloc(struct ieee80211vap *, 89 const uint8_t [IEEE80211_ADDR_LEN]); 90 static int node_init(struct ieee80211_node *); 91 static void node_cleanup(struct ieee80211_node *); 92 static void node_free(struct ieee80211_node *); 93 static void node_age(struct ieee80211_node *); 94 static int8_t node_getrssi(const struct ieee80211_node *); 95 static void node_getsignal(const struct ieee80211_node *, int8_t *, int8_t *); 96 static void node_getmimoinfo(const struct ieee80211_node *, 97 struct ieee80211_mimo_info *); 98 99 static void __ieee80211_free_node(struct ieee80211_node *); 100 101 static void node_reclaim(struct ieee80211_node_table *nt, 102 struct ieee80211_node *ni); 103 static void ieee80211_node_table_init(struct ieee80211com *ic, 104 struct ieee80211_node_table *nt, const char *name, 105 int inact, int keymaxix); 106 static void ieee80211_node_table_reset(struct ieee80211_node_table *, 107 struct ieee80211vap *); 108 static void ieee80211_node_table_cleanup(struct ieee80211_node_table *nt); 109 static void ieee80211_vap_erp_timeout(struct ieee80211vap *); 110 111 MALLOC_DEFINE(M_80211_NODE, "80211node", "802.11 node state"); 112 MALLOC_DEFINE(M_80211_NODE_IE, "80211nodeie", "802.11 node ie"); 113 114 void 115 ieee80211_node_attach(struct ieee80211com *ic) 116 { 117 /* XXX really want maxlen enforced per-sta */ 118 ieee80211_ageq_init(&ic->ic_stageq, ic->ic_max_keyix * 8, 119 "802.11 staging q"); 120 ieee80211_node_table_init(ic, &ic->ic_sta, "station", 121 IEEE80211_INACT_INIT, ic->ic_max_keyix); 122 callout_init(&ic->ic_inact, 1); 123 callout_reset(&ic->ic_inact, IEEE80211_INACT_WAIT*hz, 124 ieee80211_node_timeout, ic); 125 126 ic->ic_node_alloc = node_alloc; 127 ic->ic_node_init = node_init; 128 ic->ic_node_free = node_free; 129 ic->ic_node_cleanup = node_cleanup; 130 ic->ic_node_age = node_age; 131 ic->ic_node_drain = node_age; /* NB: same as age */ 132 ic->ic_node_getrssi = node_getrssi; 133 ic->ic_node_getsignal = node_getsignal; 134 ic->ic_node_getmimoinfo = node_getmimoinfo; 135 136 /* 137 * Set flags to be propagated to all vap's; 138 * these define default behaviour/configuration. 139 */ 140 ic->ic_flags_ext |= IEEE80211_FEXT_INACT; /* inactivity processing */ 141 } 142 143 void 144 ieee80211_node_detach(struct ieee80211com *ic) 145 { 146 147 callout_drain(&ic->ic_inact); 148 ieee80211_node_table_cleanup(&ic->ic_sta); 149 ieee80211_ageq_drain(&ic->ic_stageq); 150 ieee80211_ageq_cleanup(&ic->ic_stageq); 151 } 152 153 void 154 ieee80211_node_vattach(struct ieee80211vap *vap) 155 { 156 /* NB: driver can override */ 157 vap->iv_max_aid = IEEE80211_AID_DEF; 158 159 /* default station inactivity timer settings */ 160 vap->iv_inact_init = IEEE80211_INACT_INIT; 161 vap->iv_inact_auth = IEEE80211_INACT_AUTH; 162 vap->iv_inact_run = IEEE80211_INACT_RUN; 163 vap->iv_inact_probe = IEEE80211_INACT_PROBE; 164 165 IEEE80211_DPRINTF(vap, IEEE80211_MSG_INACT, 166 "%s: init %u auth %u run %u probe %u\n", __func__, 167 vap->iv_inact_init, vap->iv_inact_auth, 168 vap->iv_inact_run, vap->iv_inact_probe); 169 } 170 171 void 172 ieee80211_node_latevattach(struct ieee80211vap *vap) 173 { 174 175 /* XXX should ieee80211_vap_attach(), our only caller hold the lock? */ 176 IEEE80211_UNLOCK_ASSERT(vap->iv_ic); 177 178 if (vap->iv_opmode == IEEE80211_M_HOSTAP) { 179 /* XXX should we allow max aid to be zero? */ 180 if (vap->iv_max_aid < IEEE80211_AID_MIN) { 181 vap->iv_max_aid = IEEE80211_AID_MIN; 182 if_printf(vap->iv_ifp, 183 "WARNING: max aid too small, changed to %d\n", 184 vap->iv_max_aid); 185 } 186 vap->iv_aid_bitmap = (uint32_t *) IEEE80211_MALLOC( 187 howmany(vap->iv_max_aid, 32) * sizeof(uint32_t), 188 M_80211_NODE, 189 IEEE80211_M_NOWAIT | IEEE80211_M_ZERO); 190 if (vap->iv_aid_bitmap == NULL) { 191 /* XXX no way to recover */ 192 printf("%s: no memory for AID bitmap, max aid %d!\n", 193 __func__, vap->iv_max_aid); 194 vap->iv_max_aid = 0; 195 } 196 } 197 198 IEEE80211_LOCK(vap->iv_ic); 199 ieee80211_reset_bss(vap); 200 IEEE80211_UNLOCK(vap->iv_ic); 201 202 vap->iv_auth = ieee80211_authenticator_get(vap->iv_bss->ni_authmode); 203 } 204 205 void 206 ieee80211_node_vdetach(struct ieee80211vap *vap) 207 { 208 struct ieee80211com *ic = vap->iv_ic; 209 210 /* XXX should ieee80211_vap_detach(), our only caller hold the lock? */ 211 IEEE80211_UNLOCK_ASSERT(vap->iv_ic); 212 213 ieee80211_node_table_reset(&ic->ic_sta, vap); 214 IEEE80211_LOCK(ic); 215 if (vap->iv_bss != NULL) { 216 ieee80211_free_node(vap->iv_bss); 217 vap->iv_update_bss(vap, NULL); 218 } 219 IEEE80211_UNLOCK(ic); 220 if (vap->iv_aid_bitmap != NULL) { 221 IEEE80211_FREE(vap->iv_aid_bitmap, M_80211_NODE); 222 vap->iv_aid_bitmap = NULL; 223 } 224 } 225 226 /* 227 * Port authorize/unauthorize interfaces for use by an authenticator. 228 */ 229 230 void 231 ieee80211_node_authorize(struct ieee80211_node *ni) 232 { 233 struct ieee80211vap *vap = ni->ni_vap; 234 235 ni->ni_flags |= IEEE80211_NODE_AUTH; 236 ni->ni_inact_reload = vap->iv_inact_run; 237 ni->ni_inact = ni->ni_inact_reload; 238 239 IEEE80211_NOTE(vap, IEEE80211_MSG_INACT, ni, 240 "%s: inact_reload %u", __func__, ni->ni_inact_reload); 241 } 242 243 void 244 ieee80211_node_unauthorize(struct ieee80211_node *ni) 245 { 246 struct ieee80211vap *vap = ni->ni_vap; 247 248 ni->ni_flags &= ~IEEE80211_NODE_AUTH; 249 ni->ni_inact_reload = vap->iv_inact_auth; 250 if (ni->ni_inact > ni->ni_inact_reload) 251 ni->ni_inact = ni->ni_inact_reload; 252 253 IEEE80211_NOTE(vap, IEEE80211_MSG_INACT, ni, 254 "%s: inact_reload %u inact %u", __func__, 255 ni->ni_inact_reload, ni->ni_inact); 256 } 257 258 /* 259 * Fix tx parameters for a node according to ``association state''. 260 */ 261 void 262 ieee80211_node_setuptxparms(struct ieee80211_node *ni) 263 { 264 struct ieee80211vap *vap = ni->ni_vap; 265 enum ieee80211_phymode mode; 266 267 if (ni->ni_flags & IEEE80211_NODE_VHT) { 268 if (IEEE80211_IS_CHAN_5GHZ(ni->ni_chan)) 269 mode = IEEE80211_MODE_VHT_5GHZ; 270 else 271 mode = IEEE80211_MODE_VHT_2GHZ; 272 } else if (ni->ni_flags & IEEE80211_NODE_HT) { 273 if (IEEE80211_IS_CHAN_5GHZ(ni->ni_chan)) 274 mode = IEEE80211_MODE_11NA; 275 else 276 mode = IEEE80211_MODE_11NG; 277 } else { /* legacy rate handling */ 278 if (IEEE80211_IS_CHAN_ST(ni->ni_chan)) 279 mode = IEEE80211_MODE_STURBO_A; 280 else if (IEEE80211_IS_CHAN_HALF(ni->ni_chan)) 281 mode = IEEE80211_MODE_HALF; 282 else if (IEEE80211_IS_CHAN_QUARTER(ni->ni_chan)) 283 mode = IEEE80211_MODE_QUARTER; 284 /* NB: 108A should be handled as 11a */ 285 else if (IEEE80211_IS_CHAN_A(ni->ni_chan)) 286 mode = IEEE80211_MODE_11A; 287 else if (IEEE80211_IS_CHAN_108G(ni->ni_chan) || 288 (ni->ni_flags & IEEE80211_NODE_ERP)) 289 mode = IEEE80211_MODE_11G; 290 else 291 mode = IEEE80211_MODE_11B; 292 } 293 ni->ni_txparms = &vap->iv_txparms[mode]; 294 } 295 296 /* 297 * Set/change the channel. The rate set is also updated as 298 * to insure a consistent view by drivers. 299 * XXX should be private but hostap needs it to deal with CSA 300 */ 301 void 302 ieee80211_node_set_chan(struct ieee80211_node *ni, 303 struct ieee80211_channel *chan) 304 { 305 struct ieee80211com *ic = ni->ni_ic; 306 struct ieee80211vap *vap = ni->ni_vap; 307 enum ieee80211_phymode mode; 308 309 KASSERT(chan != IEEE80211_CHAN_ANYC, ("no channel")); 310 311 ni->ni_chan = chan; 312 mode = ieee80211_chan2mode(chan); 313 if (IEEE80211_IS_CHAN_HT(chan)) { 314 /* 315 * We must install the legacy rate est in ni_rates and the 316 * HT rate set in ni_htrates. 317 */ 318 ni->ni_htrates = *ieee80211_get_suphtrates(ic, chan); 319 /* 320 * Setup bss tx parameters based on operating mode. We 321 * use legacy rates when operating in a mixed HT+non-HT bss 322 * and non-ERP rates in 11g for mixed ERP+non-ERP bss. 323 */ 324 if (mode == IEEE80211_MODE_11NA && 325 (vap->iv_flags_ht & IEEE80211_FHT_PUREN) == 0) 326 mode = IEEE80211_MODE_11A; 327 else if (mode == IEEE80211_MODE_11NG && 328 (vap->iv_flags_ht & IEEE80211_FHT_PUREN) == 0) 329 mode = IEEE80211_MODE_11G; 330 if (mode == IEEE80211_MODE_11G && 331 (vap->iv_flags & IEEE80211_F_PUREG) == 0) 332 mode = IEEE80211_MODE_11B; 333 } 334 ni->ni_txparms = &vap->iv_txparms[mode]; 335 ni->ni_rates = *ieee80211_get_suprates(ic, chan); 336 } 337 338 static __inline void 339 copy_bss(struct ieee80211_node *nbss, const struct ieee80211_node *obss) 340 { 341 /* propagate useful state */ 342 nbss->ni_authmode = obss->ni_authmode; 343 nbss->ni_txpower = obss->ni_txpower; 344 nbss->ni_vlan = obss->ni_vlan; 345 /* XXX statistics? */ 346 /* XXX legacy WDS bssid? */ 347 } 348 349 void 350 ieee80211_create_ibss(struct ieee80211vap* vap, struct ieee80211_channel *chan) 351 { 352 struct ieee80211com *ic = vap->iv_ic; 353 struct ieee80211_node *ni; 354 355 IEEE80211_DPRINTF(vap, IEEE80211_MSG_SCAN, 356 "%s: creating %s on channel %u%c flags 0x%08x\n", __func__, 357 ieee80211_opmode_name[vap->iv_opmode], 358 ieee80211_chan2ieee(ic, chan), 359 ieee80211_channel_type_char(chan), 360 chan->ic_flags); 361 362 ni = ieee80211_alloc_node(&ic->ic_sta, vap, vap->iv_myaddr, 363 __func__, __LINE__); 364 if (ni == NULL) { 365 /* XXX recovery? */ 366 return; 367 } 368 IEEE80211_ADDR_COPY(ni->ni_bssid, vap->iv_myaddr); 369 ni->ni_esslen = vap->iv_des_ssid[0].len; 370 memcpy(ni->ni_essid, vap->iv_des_ssid[0].ssid, ni->ni_esslen); 371 if (vap->iv_bss != NULL) 372 copy_bss(ni, vap->iv_bss); 373 ni->ni_intval = ic->ic_bintval; 374 if (vap->iv_flags & IEEE80211_F_PRIVACY) 375 ni->ni_capinfo |= IEEE80211_CAPINFO_PRIVACY; 376 if (ic->ic_phytype == IEEE80211_T_FH) { 377 ni->ni_fhdwell = 200; /* XXX */ 378 ni->ni_fhindex = 1; 379 } 380 if (vap->iv_opmode == IEEE80211_M_IBSS) { 381 ni->ni_capinfo |= IEEE80211_CAPINFO_IBSS; /* XXX */ 382 if (vap->iv_flags & IEEE80211_F_DESBSSID) 383 IEEE80211_ADDR_COPY(ni->ni_bssid, vap->iv_des_bssid); 384 else { 385 net80211_get_random_bytes(ni->ni_bssid, 386 IEEE80211_ADDR_LEN); 387 /* clear group bit, add local bit */ 388 ni->ni_bssid[0] = (ni->ni_bssid[0] &~ 0x01) | 0x02; 389 } 390 } else if (vap->iv_opmode == IEEE80211_M_AHDEMO) { 391 if (vap->iv_flags & IEEE80211_F_DESBSSID) 392 IEEE80211_ADDR_COPY(ni->ni_bssid, vap->iv_des_bssid); 393 else 394 #ifdef IEEE80211_SUPPORT_TDMA 395 if ((vap->iv_caps & IEEE80211_C_TDMA) == 0) 396 #endif 397 memset(ni->ni_bssid, 0, IEEE80211_ADDR_LEN); 398 #ifdef IEEE80211_SUPPORT_MESH 399 } else if (vap->iv_opmode == IEEE80211_M_MBSS) { 400 ni->ni_meshidlen = vap->iv_mesh->ms_idlen; 401 memcpy(ni->ni_meshid, vap->iv_mesh->ms_id, ni->ni_meshidlen); 402 #endif 403 } 404 /* 405 * Fix the channel and related attributes. 406 */ 407 /* clear DFS CAC state on previous channel */ 408 if (ic->ic_bsschan != IEEE80211_CHAN_ANYC && 409 ic->ic_bsschan->ic_freq != chan->ic_freq && 410 IEEE80211_IS_CHAN_CACDONE(ic->ic_bsschan)) 411 ieee80211_dfs_cac_clear(ic, ic->ic_bsschan); 412 ic->ic_bsschan = chan; 413 ieee80211_node_set_chan(ni, chan); 414 ic->ic_curmode = ieee80211_chan2mode(chan); 415 /* 416 * Do mode-specific setup. 417 */ 418 if (IEEE80211_IS_CHAN_FULL(chan)) { 419 if (IEEE80211_IS_CHAN_ANYG(chan)) { 420 /* 421 * Use a mixed 11b/11g basic rate set. 422 */ 423 ieee80211_setbasicrates(&ni->ni_rates, 424 IEEE80211_MODE_11G); 425 if (vap->iv_flags & IEEE80211_F_PUREG) { 426 /* 427 * Also mark OFDM rates basic so 11b 428 * stations do not join (WiFi compliance). 429 */ 430 ieee80211_addbasicrates(&ni->ni_rates, 431 IEEE80211_MODE_11A); 432 } 433 } else if (IEEE80211_IS_CHAN_B(chan)) { 434 /* 435 * Force pure 11b rate set. 436 */ 437 ieee80211_setbasicrates(&ni->ni_rates, 438 IEEE80211_MODE_11B); 439 } 440 } 441 442 /* XXX TODO: other bits and pieces - eg fast-frames? */ 443 444 /* If we're an 11n channel then initialise the 11n bits */ 445 if (IEEE80211_IS_CHAN_VHT(ni->ni_chan)) { 446 /* XXX what else? */ 447 ieee80211_ht_node_init(ni); 448 ieee80211_vht_node_init(ni); 449 } else if (IEEE80211_IS_CHAN_HT(ni->ni_chan)) { 450 /* XXX what else? */ 451 ieee80211_ht_node_init(ni); 452 } 453 454 (void) ieee80211_sta_join1(ieee80211_ref_node(ni)); 455 } 456 457 /* 458 * Reset bss state on transition to the INIT state. 459 * Clear any stations from the table (they have been 460 * deauth'd) and reset the bss node (clears key, rate 461 * etc. state). 462 */ 463 void 464 ieee80211_reset_bss(struct ieee80211vap *vap) 465 { 466 struct ieee80211com *ic = vap->iv_ic; 467 struct ieee80211_node *ni, *obss; 468 469 IEEE80211_LOCK_ASSERT(ic); 470 471 ieee80211_node_table_reset(&ic->ic_sta, vap); 472 /* XXX multi-bss: wrong */ 473 ieee80211_vap_reset_erp(vap); 474 475 ni = ieee80211_alloc_node(&ic->ic_sta, vap, vap->iv_myaddr, 476 __func__, __LINE__); 477 KASSERT(ni != NULL, ("unable to setup initial BSS node")); 478 obss = vap->iv_update_bss(vap, ieee80211_ref_node(ni)); 479 if (obss != NULL) { 480 copy_bss(ni, obss); 481 ni->ni_intval = ic->ic_bintval; 482 ieee80211_free_node(obss); 483 } else 484 IEEE80211_ADDR_COPY(ni->ni_bssid, vap->iv_myaddr); 485 } 486 487 static int 488 match_ssid(const struct ieee80211_node *ni, 489 int nssid, const struct ieee80211_scan_ssid ssids[]) 490 { 491 int i; 492 493 for (i = 0; i < nssid; i++) { 494 if (ni->ni_esslen == ssids[i].len && 495 memcmp(ni->ni_essid, ssids[i].ssid, ni->ni_esslen) == 0) 496 return 1; 497 } 498 return 0; 499 } 500 501 /* 502 * Test a node for suitability/compatibility. 503 */ 504 static int 505 check_bss(struct ieee80211vap *vap, struct ieee80211_node *ni) 506 { 507 struct ieee80211com *ic = ni->ni_ic; 508 uint8_t rate; 509 510 if (isclr(ic->ic_chan_active, ieee80211_chan2ieee(ic, ni->ni_chan))) 511 return 0; 512 if (vap->iv_opmode == IEEE80211_M_IBSS) { 513 if ((ni->ni_capinfo & IEEE80211_CAPINFO_IBSS) == 0) 514 return 0; 515 } else { 516 if ((ni->ni_capinfo & IEEE80211_CAPINFO_ESS) == 0) 517 return 0; 518 } 519 if (vap->iv_flags & IEEE80211_F_PRIVACY) { 520 if ((ni->ni_capinfo & IEEE80211_CAPINFO_PRIVACY) == 0) 521 return 0; 522 } else { 523 /* XXX does this mean privacy is supported or required? */ 524 if (ni->ni_capinfo & IEEE80211_CAPINFO_PRIVACY) 525 return 0; 526 } 527 rate = ieee80211_fix_rate(ni, &ni->ni_rates, 528 IEEE80211_F_JOIN | IEEE80211_F_DONEGO | IEEE80211_F_DOFRATE); 529 if (rate & IEEE80211_RATE_BASIC) 530 return 0; 531 if (vap->iv_des_nssid != 0 && 532 !match_ssid(ni, vap->iv_des_nssid, vap->iv_des_ssid)) 533 return 0; 534 if ((vap->iv_flags & IEEE80211_F_DESBSSID) && 535 !IEEE80211_ADDR_EQ(vap->iv_des_bssid, ni->ni_bssid)) 536 return 0; 537 return 1; 538 } 539 540 #ifdef IEEE80211_DEBUG 541 /* 542 * Display node suitability/compatibility. 543 */ 544 static void 545 check_bss_debug(struct ieee80211vap *vap, struct ieee80211_node *ni) 546 { 547 struct ieee80211com *ic = ni->ni_ic; 548 uint8_t rate; 549 int fail; 550 551 fail = 0; 552 if (isclr(ic->ic_chan_active, ieee80211_chan2ieee(ic, ni->ni_chan))) 553 fail |= 0x01; 554 if (vap->iv_opmode == IEEE80211_M_IBSS) { 555 if ((ni->ni_capinfo & IEEE80211_CAPINFO_IBSS) == 0) 556 fail |= 0x02; 557 } else { 558 if ((ni->ni_capinfo & IEEE80211_CAPINFO_ESS) == 0) 559 fail |= 0x02; 560 } 561 if (vap->iv_flags & IEEE80211_F_PRIVACY) { 562 if ((ni->ni_capinfo & IEEE80211_CAPINFO_PRIVACY) == 0) 563 fail |= 0x04; 564 } else { 565 /* XXX does this mean privacy is supported or required? */ 566 if (ni->ni_capinfo & IEEE80211_CAPINFO_PRIVACY) 567 fail |= 0x04; 568 } 569 rate = ieee80211_fix_rate(ni, &ni->ni_rates, 570 IEEE80211_F_JOIN | IEEE80211_F_DONEGO | IEEE80211_F_DOFRATE); 571 if (rate & IEEE80211_RATE_BASIC) 572 fail |= 0x08; 573 if (vap->iv_des_nssid != 0 && 574 !match_ssid(ni, vap->iv_des_nssid, vap->iv_des_ssid)) 575 fail |= 0x10; 576 if ((vap->iv_flags & IEEE80211_F_DESBSSID) && 577 !IEEE80211_ADDR_EQ(vap->iv_des_bssid, ni->ni_bssid)) 578 fail |= 0x20; 579 580 printf(" %c %s", fail ? '-' : '+', ether_sprintf(ni->ni_macaddr)); 581 printf(" %s%c", ether_sprintf(ni->ni_bssid), fail & 0x20 ? '!' : ' '); 582 printf(" %3d%c", 583 ieee80211_chan2ieee(ic, ni->ni_chan), fail & 0x01 ? '!' : ' '); 584 printf(" %2dM%c", (rate & IEEE80211_RATE_VAL) / 2, 585 fail & 0x08 ? '!' : ' '); 586 printf(" %4s%c", 587 (ni->ni_capinfo & IEEE80211_CAPINFO_ESS) ? "ess" : 588 (ni->ni_capinfo & IEEE80211_CAPINFO_IBSS) ? "ibss" : 589 "????", 590 fail & 0x02 ? '!' : ' '); 591 printf(" %3s%c ", 592 (ni->ni_capinfo & IEEE80211_CAPINFO_PRIVACY) ? "wep" : "no", 593 fail & 0x04 ? '!' : ' '); 594 ieee80211_print_essid(ni->ni_essid, ni->ni_esslen); 595 printf("%s\n", fail & 0x10 ? "!" : ""); 596 } 597 #endif /* IEEE80211_DEBUG */ 598 599 int 600 ieee80211_ibss_merge_check(struct ieee80211_node *ni) 601 { 602 struct ieee80211vap *vap = ni->ni_vap; 603 604 if (ni == vap->iv_bss || 605 IEEE80211_ADDR_EQ(ni->ni_bssid, vap->iv_bss->ni_bssid)) { 606 /* unchanged, nothing to do */ 607 return 0; 608 } 609 610 if (!check_bss(vap, ni)) { 611 /* capabilities mismatch */ 612 IEEE80211_DPRINTF(vap, IEEE80211_MSG_ASSOC, 613 "%s: merge failed, capabilities mismatch\n", __func__); 614 #ifdef IEEE80211_DEBUG 615 if (ieee80211_msg_assoc(vap)) 616 check_bss_debug(vap, ni); 617 #endif 618 vap->iv_stats.is_ibss_capmismatch++; 619 return 0; 620 } 621 622 return 1; 623 } 624 625 /* 626 * Check if the given node should populate the node table. 627 * 628 * We need to be in "see all beacons for all ssids" mode in order 629 * to do IBSS merges, however this means we will populate nodes for 630 * /all/ IBSS SSIDs, versus just the one we care about. 631 * 632 * So this check ensures the node can actually belong to our IBSS 633 * configuration. For now it simply checks the SSID. 634 */ 635 int 636 ieee80211_ibss_node_check_new(struct ieee80211_node *ni, 637 const struct ieee80211_scanparams *scan) 638 { 639 struct ieee80211vap *vap = ni->ni_vap; 640 int i; 641 642 /* 643 * If we have no SSID and no scan SSID, return OK. 644 */ 645 if (vap->iv_des_nssid == 0 && scan->ssid == NULL) 646 goto ok; 647 648 /* 649 * If we have one of (SSID, scan SSID) then return error. 650 */ 651 if (!! (vap->iv_des_nssid == 0) != !! (scan->ssid == NULL)) 652 goto mismatch; 653 654 /* 655 * Double-check - we need scan SSID. 656 */ 657 if (scan->ssid == NULL) 658 goto mismatch; 659 660 /* 661 * Check if the scan SSID matches the SSID list for the VAP. 662 */ 663 for (i = 0; i < vap->iv_des_nssid; i++) { 664 /* Sanity length check */ 665 if (vap->iv_des_ssid[i].len != scan->ssid[1]) 666 continue; 667 668 /* Note: SSID in the scan entry is the IE format */ 669 if (memcmp(vap->iv_des_ssid[i].ssid, scan->ssid + 2, 670 vap->iv_des_ssid[i].len) == 0) 671 goto ok; 672 } 673 674 mismatch: 675 return (0); 676 ok: 677 return (1); 678 } 679 680 /* 681 * Handle 802.11 ad hoc network merge. The 682 * convention, set by the Wireless Ethernet Compatibility Alliance 683 * (WECA), is that an 802.11 station will change its BSSID to match 684 * the "oldest" 802.11 ad hoc network, on the same channel, that 685 * has the station's desired SSID. The "oldest" 802.11 network 686 * sends beacons with the greatest TSF timestamp. 687 * 688 * The caller is assumed to validate TSF's before attempting a merge. 689 * 690 * Return !0 if the BSSID changed, 0 otherwise. 691 */ 692 int 693 ieee80211_ibss_merge(struct ieee80211_node *ni) 694 { 695 #ifdef IEEE80211_DEBUG 696 struct ieee80211vap *vap = ni->ni_vap; 697 #endif 698 699 if (! ieee80211_ibss_merge_check(ni)) 700 return 0; 701 702 IEEE80211_DPRINTF(vap, IEEE80211_MSG_ASSOC, 703 "%s: new bssid %s: %s preamble, %s slot time%s\n", __func__, 704 ether_sprintf(ni->ni_bssid), 705 vap->iv_flags&IEEE80211_F_SHPREAMBLE ? "short" : "long", 706 vap->iv_flags&IEEE80211_F_SHSLOT ? "short" : "long", 707 vap->iv_flags&IEEE80211_F_USEPROT ? ", protection" : "" 708 ); 709 return ieee80211_sta_join1(ieee80211_ref_node(ni)); 710 } 711 712 /* 713 * Calculate HT channel promotion flags for all vaps. 714 * This assumes ni_chan have been setup for each vap. 715 */ 716 static int 717 gethtadjustflags(struct ieee80211com *ic) 718 { 719 struct ieee80211vap *vap; 720 int flags; 721 722 flags = 0; 723 /* XXX locking */ 724 TAILQ_FOREACH(vap, &ic->ic_vaps, iv_next) { 725 if (vap->iv_state < IEEE80211_S_RUN) 726 continue; 727 switch (vap->iv_opmode) { 728 case IEEE80211_M_WDS: 729 case IEEE80211_M_STA: 730 case IEEE80211_M_AHDEMO: 731 case IEEE80211_M_HOSTAP: 732 case IEEE80211_M_IBSS: 733 case IEEE80211_M_MBSS: 734 flags |= ieee80211_htchanflags(vap->iv_bss->ni_chan); 735 break; 736 default: 737 break; 738 } 739 } 740 return flags; 741 } 742 743 /* 744 * Calculate VHT channel promotion flags for all vaps. 745 * This assumes ni_chan have been setup for each vap. 746 */ 747 static int 748 getvhtadjustflags(struct ieee80211com *ic) 749 { 750 struct ieee80211vap *vap; 751 int flags; 752 753 flags = 0; 754 /* XXX locking */ 755 TAILQ_FOREACH(vap, &ic->ic_vaps, iv_next) { 756 if (vap->iv_state < IEEE80211_S_RUN) 757 continue; 758 switch (vap->iv_opmode) { 759 case IEEE80211_M_WDS: 760 case IEEE80211_M_STA: 761 case IEEE80211_M_AHDEMO: 762 case IEEE80211_M_HOSTAP: 763 case IEEE80211_M_IBSS: 764 case IEEE80211_M_MBSS: 765 flags |= ieee80211_vhtchanflags(vap->iv_bss->ni_chan); 766 break; 767 default: 768 break; 769 } 770 } 771 return flags; 772 } 773 774 /* 775 * Check if the current channel needs to change based on whether 776 * any vap's are using HT20/HT40. This is used to sync the state 777 * of ic_curchan after a channel width change on a running vap. 778 * 779 * Same applies for VHT. 780 */ 781 void 782 ieee80211_sync_curchan(struct ieee80211com *ic) 783 { 784 struct ieee80211_channel *c; 785 786 c = ieee80211_ht_adjust_channel(ic, ic->ic_curchan, gethtadjustflags(ic)); 787 c = ieee80211_vht_adjust_channel(ic, c, getvhtadjustflags(ic)); 788 789 if (c != ic->ic_curchan) { 790 ic->ic_curchan = c; 791 ic->ic_curmode = ieee80211_chan2mode(ic->ic_curchan); 792 ic->ic_rt = ieee80211_get_ratetable(ic->ic_curchan); 793 IEEE80211_UNLOCK(ic); 794 ic->ic_set_channel(ic); 795 ieee80211_radiotap_chan_change(ic); 796 IEEE80211_LOCK(ic); 797 } 798 } 799 800 /* 801 * Setup the current channel. The request channel may be 802 * promoted if other vap's are operating with HT20/HT40. 803 */ 804 void 805 ieee80211_setupcurchan(struct ieee80211com *ic, struct ieee80211_channel *c) 806 { 807 if (ic->ic_htcaps & IEEE80211_HTC_HT) { 808 int flags = gethtadjustflags(ic); 809 /* 810 * Check for channel promotion required to support the 811 * set of running vap's. This assumes we are called 812 * after ni_chan is setup for each vap. 813 */ 814 /* XXX VHT? */ 815 /* NB: this assumes IEEE80211_FHT_USEHT40 > IEEE80211_FHT_HT */ 816 if (flags > ieee80211_htchanflags(c)) 817 c = ieee80211_ht_adjust_channel(ic, c, flags); 818 } 819 820 /* 821 * VHT promotion - this will at least promote to VHT20/40 822 * based on what HT has done; it may further promote the 823 * channel to VHT80 or above. 824 */ 825 if (ic->ic_vht_cap.vht_cap_info != 0) { 826 int flags = getvhtadjustflags(ic); 827 if (flags > ieee80211_vhtchanflags(c)) 828 c = ieee80211_vht_adjust_channel(ic, c, flags); 829 } 830 831 ic->ic_bsschan = ic->ic_curchan = c; 832 ic->ic_curmode = ieee80211_chan2mode(ic->ic_curchan); 833 ic->ic_rt = ieee80211_get_ratetable(ic->ic_curchan); 834 } 835 836 /* 837 * Change the current channel. The channel change is guaranteed to have 838 * happened before the next state change. 839 */ 840 void 841 ieee80211_setcurchan(struct ieee80211com *ic, struct ieee80211_channel *c) 842 { 843 ieee80211_setupcurchan(ic, c); 844 ieee80211_runtask(ic, &ic->ic_chan_task); 845 } 846 847 void 848 ieee80211_update_chw(struct ieee80211com *ic) 849 { 850 851 ieee80211_setupcurchan(ic, ic->ic_curchan); 852 ieee80211_runtask(ic, &ic->ic_chw_task); 853 } 854 855 /* 856 * Join the specified IBSS/BSS network. The node is assumed to 857 * be passed in with a held reference. 858 */ 859 static int 860 ieee80211_sta_join1(struct ieee80211_node *selbs) 861 { 862 struct ieee80211vap *vap = selbs->ni_vap; 863 struct ieee80211com *ic = selbs->ni_ic; 864 struct ieee80211_node *obss; 865 int canreassoc; 866 867 /* 868 * Committed to selbs, setup state. 869 */ 870 IEEE80211_LOCK(ic); /* XXX may recurse here, check callers. */ 871 obss = vap->iv_update_bss(vap, selbs); /* NB: caller assumed to bump refcnt */ 872 IEEE80211_UNLOCK(ic); 873 /* 874 * Check if old+new node have the same address in which 875 * case we can reassociate when operating in sta mode. 876 */ 877 /* XXX We'll not be in RUN anymore as iv_state got updated already? */ 878 canreassoc = (obss != NULL && 879 vap->iv_state == IEEE80211_S_RUN && 880 IEEE80211_ADDR_EQ(obss->ni_macaddr, selbs->ni_macaddr)); 881 if (obss != NULL) { 882 struct ieee80211_node_table *nt = obss->ni_table; 883 884 copy_bss(selbs, obss); 885 if (nt != NULL) { 886 ieee80211_node_decref(obss); /* iv_bss reference */ 887 IEEE80211_NODE_LOCK(nt); 888 node_reclaim(nt, obss); /* station table reference */ 889 IEEE80211_NODE_UNLOCK(nt); 890 } else { 891 ieee80211_free_node(obss); /* iv_bss reference */ 892 } 893 894 obss = NULL; /* NB: guard against later use */ 895 } 896 897 /* 898 * Delete unusable rates; we've already checked 899 * that the negotiated rate set is acceptable. 900 */ 901 ieee80211_fix_rate(vap->iv_bss, &vap->iv_bss->ni_rates, 902 IEEE80211_F_DODEL | IEEE80211_F_JOIN); 903 904 ieee80211_setcurchan(ic, selbs->ni_chan); 905 /* 906 * Set the erp state (mostly the slot time) to deal with 907 * the auto-select case; this should be redundant if the 908 * mode is locked. 909 */ 910 ieee80211_vap_reset_erp(vap); 911 ieee80211_wme_initparams(vap); 912 913 if (vap->iv_opmode == IEEE80211_M_STA) { 914 if (canreassoc) { 915 /* Reassociate */ 916 ieee80211_new_state(vap, IEEE80211_S_ASSOC, 1); 917 } else { 918 /* 919 * Act as if we received a DEAUTH frame in case we 920 * are invoked from the RUN state. This will cause 921 * us to try to re-authenticate if we are operating 922 * as a station. 923 */ 924 IEEE80211_DPRINTF(vap, IEEE80211_MSG_AUTH, 925 "%s %p<%s> %s -> AUTH, FC0_SUBTYPE_DEAUTH\n", 926 __func__, selbs, ether_sprintf(selbs->ni_macaddr), 927 ieee80211_state_name[vap->iv_state]); 928 ieee80211_new_state(vap, IEEE80211_S_AUTH, 929 IEEE80211_FC0_SUBTYPE_DEAUTH); 930 } 931 } else 932 ieee80211_new_state(vap, IEEE80211_S_RUN, -1); 933 return 1; 934 } 935 936 int 937 ieee80211_sta_join(struct ieee80211vap *vap, struct ieee80211_channel *chan, 938 const struct ieee80211_scan_entry *se) 939 { 940 struct ieee80211com *ic = vap->iv_ic; 941 struct ieee80211_node *ni; 942 int do_ht = 0; 943 944 ni = ieee80211_alloc_node(&ic->ic_sta, vap, se->se_macaddr, 945 __func__, __LINE__); 946 if (ni == NULL) { 947 /* XXX msg */ 948 return 0; 949 } 950 951 /* 952 * Expand scan state into node's format. 953 * XXX may not need all this stuff 954 */ 955 IEEE80211_ADDR_COPY(ni->ni_bssid, se->se_bssid); 956 ni->ni_esslen = se->se_ssid[1]; 957 memcpy(ni->ni_essid, se->se_ssid+2, ni->ni_esslen); 958 ni->ni_tstamp.tsf = se->se_tstamp.tsf; 959 ni->ni_intval = se->se_intval; 960 ni->ni_capinfo = se->se_capinfo; 961 ni->ni_chan = chan; 962 ni->ni_timoff = se->se_timoff; 963 ni->ni_fhdwell = se->se_fhdwell; 964 ni->ni_fhindex = se->se_fhindex; 965 ni->ni_erp = se->se_erp; 966 IEEE80211_RSSI_LPF(ni->ni_avgrssi, se->se_rssi); 967 ni->ni_noise = se->se_noise; 968 if (vap->iv_opmode == IEEE80211_M_STA) { 969 /* NB: only infrastructure mode requires an associd */ 970 ni->ni_flags |= IEEE80211_NODE_ASSOCID; 971 } 972 973 if (ieee80211_ies_init(&ni->ni_ies, se->se_ies.data, se->se_ies.len)) { 974 ieee80211_ies_expand(&ni->ni_ies); 975 #ifdef IEEE80211_SUPPORT_SUPERG 976 if (ni->ni_ies.ath_ie != NULL) 977 ieee80211_parse_ath(ni, ni->ni_ies.ath_ie); 978 #endif 979 if (ni->ni_ies.htcap_ie != NULL) 980 ieee80211_parse_htcap(ni, ni->ni_ies.htcap_ie); 981 if (ni->ni_ies.htinfo_ie != NULL) 982 ieee80211_parse_htinfo(ni, ni->ni_ies.htinfo_ie); 983 #ifdef IEEE80211_SUPPORT_MESH 984 if (ni->ni_ies.meshid_ie != NULL) 985 ieee80211_parse_meshid(ni, ni->ni_ies.meshid_ie); 986 #endif 987 #ifdef IEEE80211_SUPPORT_TDMA 988 if (ni->ni_ies.tdma_ie != NULL) 989 ieee80211_parse_tdma(ni, ni->ni_ies.tdma_ie); 990 #endif 991 if (ni->ni_ies.vhtcap_ie != NULL) 992 ieee80211_parse_vhtcap(ni, ni->ni_ies.vhtcap_ie); 993 if (ni->ni_ies.vhtopmode_ie != NULL) 994 ieee80211_parse_vhtopmode(ni, ni->ni_ies.vhtopmode_ie); 995 996 /* XXX parse BSSLOAD IE */ 997 /* XXX parse TXPWRENV IE */ 998 /* XXX parse APCHANREP IE */ 999 } 1000 1001 vap->iv_dtim_period = se->se_dtimperiod; 1002 vap->iv_dtim_count = 0; 1003 1004 /* NB: must be after ni_chan is setup */ 1005 ieee80211_setup_rates(ni, se->se_rates, se->se_xrates, 1006 IEEE80211_F_DOSORT); 1007 if (ieee80211_iserp_rateset(&ni->ni_rates)) 1008 ni->ni_flags |= IEEE80211_NODE_ERP; 1009 1010 /* 1011 * Setup HT state for this node if it's available, otherwise 1012 * non-STA modes won't pick this state up. 1013 * 1014 * For IBSS and related modes that don't go through an 1015 * association request/response, the only appropriate place 1016 * to setup the HT state is here. 1017 */ 1018 if (ni->ni_ies.htinfo_ie != NULL && 1019 ni->ni_ies.htcap_ie != NULL && 1020 vap->iv_flags_ht & IEEE80211_FHT_HT) { 1021 ieee80211_ht_node_init(ni); 1022 ieee80211_ht_updateparams(ni, 1023 ni->ni_ies.htcap_ie, 1024 ni->ni_ies.htinfo_ie); 1025 do_ht = 1; 1026 } 1027 1028 /* 1029 * Setup VHT state for this node if it's available. 1030 * Same as the above. 1031 * 1032 * For now, don't allow 2GHz VHT operation. 1033 */ 1034 if (ni->ni_ies.vhtopmode_ie != NULL && 1035 ni->ni_ies.vhtcap_ie != NULL && 1036 vap->iv_vht_flags & IEEE80211_FVHT_VHT) { 1037 if (IEEE80211_IS_CHAN_2GHZ(ni->ni_chan)) { 1038 printf("%s: BSS %6D: 2GHz channel, VHT info; ignoring\n", 1039 __func__, 1040 ni->ni_macaddr, 1041 ":"); 1042 } else { 1043 ieee80211_vht_node_init(ni); 1044 ieee80211_vht_updateparams(ni, 1045 ni->ni_ies.vhtcap_ie, 1046 ni->ni_ies.vhtopmode_ie); 1047 ieee80211_setup_vht_rates(ni); 1048 do_ht = 1; 1049 } 1050 } 1051 1052 /* Finally do the node channel change */ 1053 if (do_ht) { 1054 ieee80211_ht_updateparams_final(ni, ni->ni_ies.htcap_ie, 1055 ni->ni_ies.htinfo_ie); 1056 ieee80211_setup_htrates(ni, ni->ni_ies.htcap_ie, 1057 IEEE80211_F_JOIN | IEEE80211_F_DOBRS); 1058 ieee80211_setup_basic_htrates(ni, ni->ni_ies.htinfo_ie); 1059 } 1060 1061 /* XXX else check for ath FF? */ 1062 /* XXX QoS? Difficult given that WME config is specific to a master */ 1063 1064 ieee80211_node_setuptxparms(ni); 1065 ieee80211_ratectl_node_init(ni); 1066 1067 return ieee80211_sta_join1(ieee80211_ref_node(ni)); 1068 } 1069 1070 /* 1071 * Leave the specified IBSS/BSS network. The node is assumed to 1072 * be passed in with a held reference. 1073 */ 1074 void 1075 ieee80211_sta_leave(struct ieee80211_node *ni) 1076 { 1077 struct ieee80211com *ic = ni->ni_ic; 1078 1079 ic->ic_node_cleanup(ni); 1080 ieee80211_notify_node_leave(ni); 1081 } 1082 1083 /* 1084 * Send a deauthenticate frame and drop the station. 1085 */ 1086 void 1087 ieee80211_node_deauth(struct ieee80211_node *ni, int reason) 1088 { 1089 /* NB: bump the refcnt to be sure temporary nodes are not reclaimed */ 1090 ieee80211_ref_node(ni); 1091 if (ni->ni_associd != 0) 1092 IEEE80211_SEND_MGMT(ni, IEEE80211_FC0_SUBTYPE_DEAUTH, reason); 1093 ieee80211_node_leave(ni); 1094 ieee80211_free_node(ni); 1095 } 1096 1097 static struct ieee80211_node * 1098 node_alloc(struct ieee80211vap *vap, const uint8_t macaddr[IEEE80211_ADDR_LEN]) 1099 { 1100 struct ieee80211_node *ni; 1101 1102 ni = (struct ieee80211_node *) IEEE80211_MALLOC(sizeof(struct ieee80211_node), 1103 M_80211_NODE, IEEE80211_M_NOWAIT | IEEE80211_M_ZERO); 1104 return ni; 1105 } 1106 1107 static int 1108 node_init(struct ieee80211_node *ni) 1109 { 1110 return 0; 1111 } 1112 1113 /* 1114 * Initialize an ie blob with the specified data. If previous 1115 * data exists re-use the data block. As a side effect we clear 1116 * all references to specific ie's; the caller is required to 1117 * recalculate them. 1118 */ 1119 int 1120 ieee80211_ies_init(struct ieee80211_ies *ies, const uint8_t *data, int len) 1121 { 1122 /* NB: assumes data+len are the last fields */ 1123 memset(ies, 0, offsetof(struct ieee80211_ies, data)); 1124 if (ies->data != NULL && ies->len != len) { 1125 /* data size changed */ 1126 IEEE80211_FREE(ies->data, M_80211_NODE_IE); 1127 ies->data = NULL; 1128 } 1129 if (ies->data == NULL) { 1130 ies->data = (uint8_t *) IEEE80211_MALLOC(len, M_80211_NODE_IE, 1131 IEEE80211_M_NOWAIT | IEEE80211_M_ZERO); 1132 if (ies->data == NULL) { 1133 ies->len = 0; 1134 /* NB: pointers have already been zero'd above */ 1135 return 0; 1136 } 1137 } 1138 memcpy(ies->data, data, len); 1139 ies->len = len; 1140 return 1; 1141 } 1142 1143 /* 1144 * Reclaim storage for an ie blob. 1145 */ 1146 void 1147 ieee80211_ies_cleanup(struct ieee80211_ies *ies) 1148 { 1149 if (ies->data != NULL) 1150 IEEE80211_FREE(ies->data, M_80211_NODE_IE); 1151 } 1152 1153 /* 1154 * Expand an ie blob data contents and to fillin individual 1155 * ie pointers. The data blob is assumed to be well-formed; 1156 * we don't do any validity checking of ie lengths. 1157 */ 1158 void 1159 ieee80211_ies_expand(struct ieee80211_ies *ies) 1160 { 1161 uint8_t *ie; 1162 int ielen; 1163 1164 ie = ies->data; 1165 ielen = ies->len; 1166 while (ielen > 1) { 1167 /* Make sure the given IE length fits into the total length. */ 1168 if ((2 + ie[1]) > ielen) { 1169 printf("%s: malformed IEs! ies %p { data %p len %d }: " 1170 "ie %u len 2+%u > total len left %d\n", 1171 __func__, ies, ies->data, ies->len, 1172 ie[0], ie[1], ielen); 1173 return; 1174 } 1175 switch (ie[0]) { 1176 case IEEE80211_ELEMID_VENDOR: 1177 if (iswpaoui(ie)) 1178 ies->wpa_ie = ie; 1179 else if (iswmeoui(ie)) 1180 ies->wme_ie = ie; 1181 #ifdef IEEE80211_SUPPORT_SUPERG 1182 else if (isatherosoui(ie)) 1183 ies->ath_ie = ie; 1184 #endif 1185 #ifdef IEEE80211_SUPPORT_TDMA 1186 else if (istdmaoui(ie)) 1187 ies->tdma_ie = ie; 1188 #endif 1189 break; 1190 case IEEE80211_ELEMID_RSN: 1191 ies->rsn_ie = ie; 1192 break; 1193 case IEEE80211_ELEMID_HTCAP: 1194 ies->htcap_ie = ie; 1195 break; 1196 case IEEE80211_ELEMID_HTINFO: 1197 ies->htinfo_ie = ie; 1198 break; 1199 #ifdef IEEE80211_SUPPORT_MESH 1200 case IEEE80211_ELEMID_MESHID: 1201 ies->meshid_ie = ie; 1202 break; 1203 #endif 1204 case IEEE80211_ELEMID_VHT_CAP: 1205 ies->vhtcap_ie = ie; 1206 break; 1207 case IEEE80211_ELEMID_VHT_OPMODE: 1208 ies->vhtopmode_ie = ie; 1209 break; 1210 case IEEE80211_ELEMID_VHT_PWR_ENV: 1211 ies->vhtpwrenv_ie = ie; 1212 break; 1213 case IEEE80211_ELEMID_BSSLOAD: 1214 ies->bssload_ie = ie; 1215 break; 1216 case IEEE80211_ELEMID_APCHANREP: 1217 ies->apchanrep_ie = ie; 1218 break; 1219 } 1220 ielen -= 2 + ie[1]; 1221 ie += 2 + ie[1]; 1222 } 1223 } 1224 1225 /* 1226 * Reclaim any resources in a node and reset any critical 1227 * state. Typically nodes are free'd immediately after, 1228 * but in some cases the storage may be reused so we need 1229 * to insure consistent state (should probably fix that). 1230 */ 1231 static void 1232 node_cleanup(struct ieee80211_node *ni) 1233 { 1234 struct ieee80211vap *vap = ni->ni_vap; 1235 struct ieee80211com *ic = ni->ni_ic; 1236 int i; 1237 1238 /* NB: preserve ni_table */ 1239 if (ni->ni_flags & IEEE80211_NODE_PWR_MGT) { 1240 if (vap->iv_opmode != IEEE80211_M_STA) 1241 vap->iv_ps_sta--; 1242 ni->ni_flags &= ~IEEE80211_NODE_PWR_MGT; 1243 IEEE80211_NOTE(vap, IEEE80211_MSG_POWER, ni, 1244 "power save mode off, %u sta's in ps mode", vap->iv_ps_sta); 1245 } 1246 /* 1247 * Cleanup any VHT and HT-related state. 1248 */ 1249 if (ni->ni_flags & IEEE80211_NODE_VHT) 1250 ieee80211_vht_node_cleanup(ni); 1251 if (ni->ni_flags & IEEE80211_NODE_HT) 1252 ieee80211_ht_node_cleanup(ni); 1253 #ifdef IEEE80211_SUPPORT_SUPERG 1254 /* Always do FF node cleanup; for A-MSDU */ 1255 ieee80211_ff_node_cleanup(ni); 1256 #endif 1257 #ifdef IEEE80211_SUPPORT_MESH 1258 /* 1259 * Cleanup any mesh-related state. 1260 */ 1261 if (vap->iv_opmode == IEEE80211_M_MBSS) 1262 ieee80211_mesh_node_cleanup(ni); 1263 #endif 1264 /* 1265 * Clear any staging queue entries. 1266 */ 1267 ieee80211_ageq_drain_node(&ic->ic_stageq, ni); 1268 1269 /* 1270 * Clear AREF flag that marks the authorization refcnt bump 1271 * has happened. This is probably not needed as the node 1272 * should always be removed from the table so not found but 1273 * do it just in case. 1274 * Likewise clear the ASSOCID flag as these flags are intended 1275 * to be managed in tandem. 1276 */ 1277 ni->ni_flags &= ~(IEEE80211_NODE_AREF | IEEE80211_NODE_ASSOCID); 1278 1279 /* 1280 * Drain power save queue and, if needed, clear TIM. 1281 */ 1282 if (ieee80211_node_psq_drain(ni) != 0 && vap->iv_set_tim != NULL) 1283 vap->iv_set_tim(ni, 0); 1284 1285 ni->ni_associd = 0; 1286 if (ni->ni_challenge != NULL) { 1287 IEEE80211_FREE(ni->ni_challenge, M_80211_NODE); 1288 ni->ni_challenge = NULL; 1289 } 1290 /* 1291 * Preserve SSID, WPA, and WME ie's so the bss node is 1292 * reusable during a re-auth/re-assoc state transition. 1293 * If we remove these data they will not be recreated 1294 * because they come from a probe-response or beacon frame 1295 * which cannot be expected prior to the association-response. 1296 * This should not be an issue when operating in other modes 1297 * as stations leaving always go through a full state transition 1298 * which will rebuild this state. 1299 * 1300 * XXX does this leave us open to inheriting old state? 1301 */ 1302 for (i = 0; i < nitems(ni->ni_rxfrag); i++) 1303 if (ni->ni_rxfrag[i] != NULL) { 1304 m_freem(ni->ni_rxfrag[i]); 1305 ni->ni_rxfrag[i] = NULL; 1306 } 1307 /* 1308 * Must be careful here to remove any key map entry w/o a LOR. 1309 */ 1310 ieee80211_node_delucastkey(ni); 1311 } 1312 1313 static void 1314 node_free(struct ieee80211_node *ni) 1315 { 1316 struct ieee80211com *ic = ni->ni_ic; 1317 1318 ieee80211_ratectl_node_deinit(ni); 1319 ic->ic_node_cleanup(ni); 1320 ieee80211_ies_cleanup(&ni->ni_ies); 1321 ieee80211_psq_cleanup(&ni->ni_psq); 1322 IEEE80211_FREE(ni, M_80211_NODE); 1323 } 1324 1325 static void 1326 node_age(struct ieee80211_node *ni) 1327 { 1328 struct ieee80211vap *vap = ni->ni_vap; 1329 1330 /* 1331 * Age frames on the power save queue. 1332 */ 1333 if (ieee80211_node_psq_age(ni) != 0 && 1334 ni->ni_psq.psq_len == 0 && vap->iv_set_tim != NULL) 1335 vap->iv_set_tim(ni, 0); 1336 /* 1337 * Age out HT resources (e.g. frames on the 1338 * A-MPDU reorder queues). 1339 */ 1340 if (ni->ni_associd != 0 && (ni->ni_flags & IEEE80211_NODE_HT)) 1341 ieee80211_ht_node_age(ni); 1342 } 1343 1344 static int8_t 1345 node_getrssi(const struct ieee80211_node *ni) 1346 { 1347 uint32_t avgrssi = ni->ni_avgrssi; 1348 int32_t rssi; 1349 1350 if (avgrssi == IEEE80211_RSSI_DUMMY_MARKER) 1351 return 0; 1352 rssi = IEEE80211_RSSI_GET(avgrssi); 1353 return rssi < 0 ? 0 : rssi > 127 ? 127 : rssi; 1354 } 1355 1356 static void 1357 node_getsignal(const struct ieee80211_node *ni, int8_t *rssi, int8_t *noise) 1358 { 1359 *rssi = node_getrssi(ni); 1360 *noise = ni->ni_noise; 1361 } 1362 1363 static void 1364 node_getmimoinfo(const struct ieee80211_node *ni, 1365 struct ieee80211_mimo_info *info) 1366 { 1367 int i; 1368 uint32_t avgrssi; 1369 int32_t rssi; 1370 1371 bzero(info, sizeof(*info)); 1372 1373 for (i = 0; i < MIN(IEEE80211_MAX_CHAINS, ni->ni_mimo_chains); i++) { 1374 /* Note: for now, just pri20 channel info */ 1375 avgrssi = ni->ni_mimo_rssi_ctl[i]; 1376 if (avgrssi == IEEE80211_RSSI_DUMMY_MARKER) { 1377 info->ch[i].rssi[0] = 0; 1378 } else { 1379 rssi = IEEE80211_RSSI_GET(avgrssi); 1380 info->ch[i].rssi[0] = rssi < 0 ? 0 : rssi > 127 ? 127 : rssi; 1381 } 1382 info->ch[i].noise[0] = ni->ni_mimo_noise_ctl[i]; 1383 } 1384 1385 /* XXX ext radios? */ 1386 1387 /* XXX EVM? */ 1388 } 1389 1390 static void 1391 ieee80211_add_node_nt(struct ieee80211_node_table *nt, 1392 struct ieee80211_node *ni) 1393 { 1394 struct ieee80211com *ic = nt->nt_ic; 1395 int hash; 1396 1397 IEEE80211_NODE_LOCK_ASSERT(nt); 1398 1399 hash = IEEE80211_NODE_HASH(ic, ni->ni_macaddr); 1400 (void) ic; /* XXX IEEE80211_NODE_HASH */ 1401 TAILQ_INSERT_TAIL(&nt->nt_node, ni, ni_list); 1402 LIST_INSERT_HEAD(&nt->nt_hash[hash], ni, ni_hash); 1403 nt->nt_count++; 1404 ni->ni_table = nt; 1405 } 1406 1407 static void 1408 ieee80211_del_node_nt(struct ieee80211_node_table *nt, 1409 struct ieee80211_node *ni) 1410 { 1411 1412 IEEE80211_NODE_LOCK_ASSERT(nt); 1413 1414 TAILQ_REMOVE(&nt->nt_node, ni, ni_list); 1415 LIST_REMOVE(ni, ni_hash); 1416 nt->nt_count--; 1417 KASSERT(nt->nt_count >= 0, 1418 ("nt_count is negative (%d)!\n", nt->nt_count)); 1419 ni->ni_table = NULL; 1420 } 1421 1422 static struct ieee80211_node * 1423 ieee80211_alloc_node(struct ieee80211_node_table *nt, 1424 struct ieee80211vap *vap, const uint8_t macaddr[IEEE80211_ADDR_LEN], 1425 const char *func __debrefcnt_used, int line __debrefcnt_used) 1426 { 1427 struct ieee80211com *ic = nt->nt_ic; 1428 struct ieee80211_node *ni; 1429 1430 ni = ic->ic_node_alloc(vap, macaddr); 1431 if (ni == NULL) { 1432 vap->iv_stats.is_rx_nodealloc++; 1433 return NULL; 1434 } 1435 1436 IEEE80211_DPRINTF(vap, IEEE80211_MSG_NODE, 1437 "%s %p<%s> in %s table\n", __func__, ni, 1438 ether_sprintf(macaddr), nt->nt_name); 1439 1440 IEEE80211_ADDR_COPY(ni->ni_macaddr, macaddr); 1441 ieee80211_node_initref(ni); /* mark referenced */ 1442 #ifdef IEEE80211_DEBUG_REFCNT 1443 IEEE80211_DPRINTF(vap, IEEE80211_MSG_NODE, 1444 "%s (%s:%u) %p<%s> refcnt %d\n", __func__, func, line, ni, 1445 ether_sprintf(ni->ni_macaddr), ieee80211_node_refcnt(ni)); 1446 #endif 1447 ni->ni_chan = IEEE80211_CHAN_ANYC; 1448 ni->ni_authmode = IEEE80211_AUTH_OPEN; 1449 ni->ni_txpower = ic->ic_txpowlimit; /* max power */ 1450 ni->ni_txparms = &vap->iv_txparms[ieee80211_chan2mode(ic->ic_curchan)]; 1451 ieee80211_crypto_resetkey(vap, &ni->ni_ucastkey, IEEE80211_KEYIX_NONE); 1452 ni->ni_avgrssi = IEEE80211_RSSI_DUMMY_MARKER; 1453 ni->ni_inact_reload = nt->nt_inact_init; 1454 ni->ni_inact = ni->ni_inact_reload; 1455 ni->ni_ath_defkeyix = 0x7fff; 1456 ieee80211_psq_init(&ni->ni_psq, "unknown"); 1457 #ifdef IEEE80211_SUPPORT_MESH 1458 if (vap->iv_opmode == IEEE80211_M_MBSS) 1459 ieee80211_mesh_node_init(vap, ni); 1460 #endif 1461 IEEE80211_NODE_LOCK(nt); 1462 ieee80211_add_node_nt(nt, ni); 1463 ni->ni_vap = vap; 1464 ni->ni_ic = ic; 1465 IEEE80211_NODE_UNLOCK(nt); 1466 1467 /* handle failure; free node state */ 1468 if (ic->ic_node_init(ni) != 0) { 1469 vap->iv_stats.is_rx_nodealloc++; 1470 ieee80211_psq_cleanup(&ni->ni_psq); 1471 ieee80211_ratectl_node_deinit(ni); 1472 __ieee80211_free_node(ni); 1473 return NULL; 1474 } 1475 1476 IEEE80211_NOTE(vap, IEEE80211_MSG_INACT, ni, 1477 "%s: inact_reload %u", __func__, ni->ni_inact_reload); 1478 1479 return ni; 1480 } 1481 1482 /* 1483 * Craft a temporary node suitable for sending a management frame 1484 * to the specified station. We craft only as much state as we 1485 * need to do the work since the node will be immediately reclaimed 1486 * once the send completes. 1487 */ 1488 struct ieee80211_node * 1489 ieee80211_tmp_node(struct ieee80211vap *vap, 1490 const uint8_t macaddr[IEEE80211_ADDR_LEN]) 1491 { 1492 struct ieee80211com *ic = vap->iv_ic; 1493 struct ieee80211_node *ni; 1494 1495 ni = ic->ic_node_alloc(vap, macaddr); 1496 if (ni != NULL) { 1497 struct ieee80211_node *bss = vap->iv_bss; 1498 1499 IEEE80211_DPRINTF(vap, IEEE80211_MSG_NODE, 1500 "%s %p<%s>\n", __func__, ni, ether_sprintf(macaddr)); 1501 1502 ni->ni_table = NULL; /* NB: pedantic */ 1503 ni->ni_ic = ic; /* NB: needed to set channel */ 1504 ni->ni_vap = vap; 1505 1506 IEEE80211_ADDR_COPY(ni->ni_macaddr, macaddr); 1507 IEEE80211_ADDR_COPY(ni->ni_bssid, bss->ni_bssid); 1508 ieee80211_node_initref(ni); /* mark referenced */ 1509 #ifdef IEEE80211_DEBUG_REFCNT 1510 /* Only one caller so we skip func/line passing into the func. */ 1511 IEEE80211_DPRINTF(vap, IEEE80211_MSG_NODE, 1512 "%s (%s:%u) %p<%s> refcnt %d\n", __func__, "", -1, ni, 1513 ether_sprintf(ni->ni_macaddr), ieee80211_node_refcnt(ni)); 1514 #endif 1515 /* NB: required by ieee80211_fix_rate */ 1516 ieee80211_node_set_chan(ni, bss->ni_chan); 1517 ieee80211_crypto_resetkey(vap, &ni->ni_ucastkey, 1518 IEEE80211_KEYIX_NONE); 1519 ni->ni_txpower = bss->ni_txpower; 1520 /* XXX optimize away */ 1521 ieee80211_psq_init(&ni->ni_psq, "unknown"); 1522 1523 ieee80211_ratectl_node_init(ni); 1524 1525 /* handle failure; free node state */ 1526 if (ic->ic_node_init(ni) != 0) { 1527 vap->iv_stats.is_rx_nodealloc++; 1528 ieee80211_psq_cleanup(&ni->ni_psq); 1529 ieee80211_ratectl_node_deinit(ni); 1530 __ieee80211_free_node(ni); 1531 return NULL; 1532 } 1533 1534 } else { 1535 /* XXX msg */ 1536 vap->iv_stats.is_rx_nodealloc++; 1537 } 1538 return ni; 1539 } 1540 1541 struct ieee80211_node * 1542 ieee80211_dup_bss(struct ieee80211vap *vap, 1543 const uint8_t macaddr[IEEE80211_ADDR_LEN]) 1544 { 1545 struct ieee80211com *ic = vap->iv_ic; 1546 struct ieee80211_node *ni; 1547 1548 ni = ieee80211_alloc_node(&ic->ic_sta, vap, macaddr, __func__, __LINE__); 1549 if (ni != NULL) { 1550 struct ieee80211_node *bss = vap->iv_bss; 1551 /* 1552 * Inherit from iv_bss. 1553 */ 1554 copy_bss(ni, bss); 1555 IEEE80211_ADDR_COPY(ni->ni_bssid, bss->ni_bssid); 1556 ieee80211_node_set_chan(ni, bss->ni_chan); 1557 } 1558 return ni; 1559 } 1560 1561 /* 1562 * Create a bss node for a legacy WDS vap. The far end does 1563 * not associate so we just create create a new node and 1564 * simulate an association. The caller is responsible for 1565 * installing the node as the bss node and handling any further 1566 * setup work like authorizing the port. 1567 */ 1568 struct ieee80211_node * 1569 ieee80211_node_create_wds(struct ieee80211vap *vap, 1570 const uint8_t bssid[IEEE80211_ADDR_LEN], struct ieee80211_channel *chan) 1571 { 1572 struct ieee80211com *ic = vap->iv_ic; 1573 struct ieee80211_node *ni; 1574 1575 /* XXX check if node already in sta table? */ 1576 ni = ieee80211_alloc_node(&ic->ic_sta, vap, bssid, __func__, __LINE__); 1577 if (ni != NULL) { 1578 ni->ni_wdsvap = vap; 1579 IEEE80211_ADDR_COPY(ni->ni_bssid, bssid); 1580 /* 1581 * Inherit any manually configured settings. 1582 */ 1583 copy_bss(ni, vap->iv_bss); 1584 ieee80211_node_set_chan(ni, chan); 1585 /* NB: propagate ssid so available to WPA supplicant */ 1586 ni->ni_esslen = vap->iv_des_ssid[0].len; 1587 memcpy(ni->ni_essid, vap->iv_des_ssid[0].ssid, ni->ni_esslen); 1588 /* NB: no associd for peer */ 1589 /* 1590 * There are no management frames to use to 1591 * discover neighbor capabilities, so blindly 1592 * propagate the local configuration. 1593 */ 1594 if (vap->iv_flags & IEEE80211_F_WME) 1595 ni->ni_flags |= IEEE80211_NODE_QOS; 1596 #ifdef IEEE80211_SUPPORT_SUPERG 1597 if (vap->iv_flags & IEEE80211_F_FF) 1598 ni->ni_flags |= IEEE80211_NODE_FF; 1599 #endif 1600 /* XXX VHT */ 1601 if ((ic->ic_htcaps & IEEE80211_HTC_HT) && 1602 (vap->iv_flags_ht & IEEE80211_FHT_HT)) { 1603 /* 1604 * Device is HT-capable and HT is enabled for 1605 * the vap; setup HT operation. On return 1606 * ni_chan will be adjusted to an HT channel. 1607 */ 1608 ieee80211_ht_wds_init(ni); 1609 if (vap->iv_vht_flags & IEEE80211_FVHT_VHT) { 1610 printf("%s: TODO: vht_wds_init\n", __func__); 1611 } 1612 } else { 1613 struct ieee80211_channel *c = ni->ni_chan; 1614 /* 1615 * Force a legacy channel to be used. 1616 */ 1617 c = ieee80211_find_channel(ic, 1618 c->ic_freq, c->ic_flags &~ IEEE80211_CHAN_HT); 1619 KASSERT(c != NULL, ("no legacy channel, %u/%x", 1620 ni->ni_chan->ic_freq, ni->ni_chan->ic_flags)); 1621 ni->ni_chan = c; 1622 } 1623 } 1624 return ni; 1625 } 1626 1627 struct ieee80211_node * 1628 _ieee80211_find_node_locked(struct ieee80211_node_table *nt, 1629 const uint8_t macaddr[IEEE80211_ADDR_LEN], 1630 const char *func __debrefcnt_used, int line __debrefcnt_used) 1631 { 1632 struct ieee80211_node *ni; 1633 int hash; 1634 1635 IEEE80211_NODE_LOCK_ASSERT(nt); 1636 1637 hash = IEEE80211_NODE_HASH(nt->nt_ic, macaddr); 1638 LIST_FOREACH(ni, &nt->nt_hash[hash], ni_hash) { 1639 if (IEEE80211_ADDR_EQ(ni->ni_macaddr, macaddr)) { 1640 ieee80211_ref_node(ni); /* mark referenced */ 1641 #ifdef IEEE80211_DEBUG_REFCNT 1642 IEEE80211_DPRINTF(ni->ni_vap, IEEE80211_MSG_NODE, 1643 "%s (%s:%u) %p<%s> refcnt %d\n", __func__, 1644 func, line, 1645 ni, ether_sprintf(ni->ni_macaddr), 1646 ieee80211_node_refcnt(ni)); 1647 #endif 1648 return ni; 1649 } 1650 } 1651 return NULL; 1652 } 1653 1654 struct ieee80211_node * 1655 _ieee80211_find_node(struct ieee80211_node_table *nt, 1656 const uint8_t macaddr[IEEE80211_ADDR_LEN], 1657 const char *func __debrefcnt_used, int line __debrefcnt_used) 1658 { 1659 struct ieee80211_node *ni; 1660 1661 IEEE80211_NODE_LOCK(nt); 1662 ni = _ieee80211_find_node_locked(nt, macaddr, func, line); 1663 IEEE80211_NODE_UNLOCK(nt); 1664 return ni; 1665 } 1666 1667 struct ieee80211_node * 1668 _ieee80211_find_vap_node_locked(struct ieee80211_node_table *nt, 1669 const struct ieee80211vap *vap, const uint8_t macaddr[IEEE80211_ADDR_LEN], 1670 const char *func __debrefcnt_used, int line __debrefcnt_used) 1671 { 1672 struct ieee80211_node *ni; 1673 int hash; 1674 1675 IEEE80211_NODE_LOCK_ASSERT(nt); 1676 1677 hash = IEEE80211_NODE_HASH(nt->nt_ic, macaddr); 1678 LIST_FOREACH(ni, &nt->nt_hash[hash], ni_hash) { 1679 if (ni->ni_vap == vap && 1680 IEEE80211_ADDR_EQ(ni->ni_macaddr, macaddr)) { 1681 ieee80211_ref_node(ni); /* mark referenced */ 1682 #ifdef IEEE80211_DEBUG_REFCNT 1683 IEEE80211_DPRINTF(ni->ni_vap, IEEE80211_MSG_NODE, 1684 "%s (%s:%u) %p<%s> refcnt %d\n", __func__, 1685 func, line, 1686 ni, ether_sprintf(ni->ni_macaddr), 1687 ieee80211_node_refcnt(ni)); 1688 #endif 1689 return ni; 1690 } 1691 } 1692 return NULL; 1693 } 1694 1695 struct ieee80211_node * 1696 _ieee80211_find_vap_node(struct ieee80211_node_table *nt, 1697 const struct ieee80211vap *vap, const uint8_t macaddr[IEEE80211_ADDR_LEN], 1698 const char *func __debrefcnt_used, int line __debrefcnt_used) 1699 { 1700 struct ieee80211_node *ni; 1701 1702 IEEE80211_NODE_LOCK(nt); 1703 ni = _ieee80211_find_vap_node_locked(nt, vap, macaddr, func, line); 1704 IEEE80211_NODE_UNLOCK(nt); 1705 return ni; 1706 } 1707 1708 /* 1709 * Fake up a node; this handles node discovery in adhoc mode. 1710 * Note that for the driver's benefit we treat this like 1711 * an association so the driver has an opportunity to setup 1712 * it's private state. 1713 */ 1714 struct ieee80211_node * 1715 ieee80211_fakeup_adhoc_node(struct ieee80211vap *vap, 1716 const uint8_t macaddr[IEEE80211_ADDR_LEN]) 1717 { 1718 struct ieee80211_node *ni; 1719 1720 IEEE80211_DPRINTF(vap, IEEE80211_MSG_NODE | IEEE80211_MSG_ASSOC, 1721 "%s: mac<%s>\n", __func__, ether_sprintf(macaddr)); 1722 ni = ieee80211_dup_bss(vap, macaddr); 1723 if (ni != NULL) { 1724 struct ieee80211com *ic = vap->iv_ic; 1725 1726 /* XXX no rate negotiation; just dup */ 1727 ni->ni_rates = vap->iv_bss->ni_rates; 1728 if (ieee80211_iserp_rateset(&ni->ni_rates)) 1729 ni->ni_flags |= IEEE80211_NODE_ERP; 1730 if (vap->iv_opmode == IEEE80211_M_AHDEMO) { 1731 /* 1732 * In adhoc demo mode there are no management 1733 * frames to use to discover neighbor capabilities, 1734 * so blindly propagate the local configuration 1735 * so we can do interesting things (e.g. use 1736 * WME to disable ACK's). 1737 */ 1738 /* 1739 * XXX TODO: 11n? 1740 */ 1741 if (vap->iv_flags & IEEE80211_F_WME) 1742 ni->ni_flags |= IEEE80211_NODE_QOS; 1743 #ifdef IEEE80211_SUPPORT_SUPERG 1744 if (vap->iv_flags & IEEE80211_F_FF) 1745 ni->ni_flags |= IEEE80211_NODE_FF; 1746 #endif 1747 } 1748 ieee80211_node_setuptxparms(ni); 1749 ieee80211_ratectl_node_init(ni); 1750 1751 /* 1752 * XXX TODO: 11n? At least 20MHz, at least A-MPDU RX, 1753 * not A-MPDU TX; not 11n rates, etc. We'll cycle 1754 * that after we hear that we can indeed do 11n 1755 * (either by a beacon frame or by a probe response.) 1756 */ 1757 1758 /* 1759 * This is the first time we see the node. 1760 */ 1761 if (ic->ic_newassoc != NULL) 1762 ic->ic_newassoc(ni, 1); 1763 1764 /* 1765 * Kick off a probe request to the given node; 1766 * we will then use the probe response to update 1767 * 11n/etc configuration state. 1768 * 1769 * XXX TODO: this isn't guaranteed, and until we get 1770 * a probe response, we won't be able to actually 1771 * do anything 802.11n related to the node. 1772 * So if this does indeed work, maybe we should hold 1773 * off on sending responses until we get the probe 1774 * response, or just default to some sensible subset 1775 * of 802.11n behaviour (eg always allow aggregation 1776 * negotiation TO us, but not FROM us, etc) so we 1777 * aren't entirely busted. 1778 */ 1779 if (vap->iv_opmode == IEEE80211_M_IBSS) { 1780 ieee80211_send_probereq(ni, /* node */ 1781 vap->iv_myaddr, /* SA */ 1782 ni->ni_macaddr, /* DA */ 1783 vap->iv_bss->ni_bssid, /* BSSID */ 1784 vap->iv_bss->ni_essid, 1785 vap->iv_bss->ni_esslen); /* SSID */ 1786 } 1787 1788 /* XXX not right for 802.1x/WPA */ 1789 ieee80211_node_authorize(ni); 1790 } 1791 return ni; 1792 } 1793 1794 void 1795 ieee80211_init_neighbor(struct ieee80211_node *ni, 1796 const struct ieee80211_frame *wh, 1797 const struct ieee80211_scanparams *sp) 1798 { 1799 int do_ht_setup = 0, do_vht_setup = 0; 1800 1801 ni->ni_esslen = sp->ssid[1]; 1802 memcpy(ni->ni_essid, sp->ssid + 2, sp->ssid[1]); 1803 IEEE80211_ADDR_COPY(ni->ni_bssid, wh->i_addr3); 1804 memcpy(ni->ni_tstamp.data, sp->tstamp, sizeof(ni->ni_tstamp)); 1805 ni->ni_intval = sp->bintval; 1806 ni->ni_capinfo = sp->capinfo; 1807 ni->ni_chan = ni->ni_ic->ic_curchan; 1808 ni->ni_fhdwell = sp->fhdwell; 1809 ni->ni_fhindex = sp->fhindex; 1810 ni->ni_erp = sp->erp; 1811 ni->ni_timoff = sp->timoff; 1812 #ifdef IEEE80211_SUPPORT_MESH 1813 if (ni->ni_vap->iv_opmode == IEEE80211_M_MBSS) 1814 ieee80211_mesh_init_neighbor(ni, wh, sp); 1815 #endif 1816 if (ieee80211_ies_init(&ni->ni_ies, sp->ies, sp->ies_len)) { 1817 ieee80211_ies_expand(&ni->ni_ies); 1818 if (ni->ni_ies.wme_ie != NULL) 1819 ni->ni_flags |= IEEE80211_NODE_QOS; 1820 else 1821 ni->ni_flags &= ~IEEE80211_NODE_QOS; 1822 #ifdef IEEE80211_SUPPORT_SUPERG 1823 if (ni->ni_ies.ath_ie != NULL) 1824 ieee80211_parse_ath(ni, ni->ni_ies.ath_ie); 1825 #endif 1826 if (ni->ni_ies.htcap_ie != NULL) 1827 ieee80211_parse_htcap(ni, ni->ni_ies.htcap_ie); 1828 if (ni->ni_ies.htinfo_ie != NULL) 1829 ieee80211_parse_htinfo(ni, ni->ni_ies.htinfo_ie); 1830 1831 if (ni->ni_ies.vhtcap_ie != NULL) 1832 ieee80211_parse_vhtcap(ni, ni->ni_ies.vhtcap_ie); 1833 if (ni->ni_ies.vhtopmode_ie != NULL) 1834 ieee80211_parse_vhtopmode(ni, ni->ni_ies.vhtopmode_ie); 1835 1836 if ((ni->ni_ies.htcap_ie != NULL) && 1837 (ni->ni_ies.htinfo_ie != NULL) && 1838 (ni->ni_vap->iv_flags_ht & IEEE80211_FHT_HT)) { 1839 do_ht_setup = 1; 1840 } 1841 1842 if ((ni->ni_ies.vhtcap_ie != NULL) && 1843 (ni->ni_ies.vhtopmode_ie != NULL) && 1844 (ni->ni_vap->iv_vht_flags & IEEE80211_FVHT_VHT)) { 1845 do_vht_setup = 1; 1846 } 1847 } 1848 1849 /* NB: must be after ni_chan is setup */ 1850 ieee80211_setup_rates(ni, sp->rates, sp->xrates, 1851 IEEE80211_F_DOSORT | IEEE80211_F_DOFRATE | 1852 IEEE80211_F_DONEGO | IEEE80211_F_DODEL); 1853 1854 /* 1855 * If the neighbor is HT compatible, flip that on. 1856 */ 1857 if (do_ht_setup) { 1858 IEEE80211_DPRINTF(ni->ni_vap, IEEE80211_MSG_ASSOC, 1859 "%s: doing HT setup\n", __func__); 1860 ieee80211_ht_node_init(ni); 1861 ieee80211_ht_updateparams(ni, 1862 ni->ni_ies.htcap_ie, 1863 ni->ni_ies.htinfo_ie); 1864 1865 if (do_vht_setup) { 1866 if (IEEE80211_IS_CHAN_2GHZ(ni->ni_chan)) { 1867 printf("%s: BSS %6D: 2GHz channel, VHT info; ignoring\n", 1868 __func__, 1869 ni->ni_macaddr, 1870 ":"); 1871 } else { 1872 ieee80211_vht_node_init(ni); 1873 ieee80211_vht_updateparams(ni, 1874 ni->ni_ies.vhtcap_ie, 1875 ni->ni_ies.vhtopmode_ie); 1876 ieee80211_setup_vht_rates(ni); 1877 } 1878 } 1879 1880 /* 1881 * Finally do the channel upgrade/change based 1882 * on the HT/VHT configuration. 1883 */ 1884 ieee80211_ht_updateparams_final(ni, ni->ni_ies.htcap_ie, 1885 ni->ni_ies.htinfo_ie); 1886 ieee80211_setup_htrates(ni, 1887 ni->ni_ies.htcap_ie, 1888 IEEE80211_F_JOIN | IEEE80211_F_DOBRS); 1889 ieee80211_setup_basic_htrates(ni, 1890 ni->ni_ies.htinfo_ie); 1891 1892 ieee80211_node_setuptxparms(ni); 1893 ieee80211_ratectl_node_init(ni); 1894 1895 /* Reassociate; we're now 11n/11ac */ 1896 /* 1897 * XXX TODO: this is the wrong thing to do - 1898 * we're calling it with isnew=1 so the ath(4) 1899 * driver reinitialises the rate tables. 1900 * This "mostly" works for ath(4), but it won't 1901 * be right for firmware devices which allocate 1902 * node states. 1903 * 1904 * So, do we just create a new node and delete 1905 * the old one? Or? 1906 */ 1907 if (ni->ni_ic->ic_newassoc) 1908 ni->ni_ic->ic_newassoc(ni, 1); 1909 } 1910 } 1911 1912 /* 1913 * Do node discovery in adhoc mode on receipt of a beacon 1914 * or probe response frame. Note that for the driver's 1915 * benefit we treat this like an association so the 1916 * driver has an opportunity to setup it's private state. 1917 */ 1918 struct ieee80211_node * 1919 ieee80211_add_neighbor(struct ieee80211vap *vap, 1920 const struct ieee80211_frame *wh, 1921 const struct ieee80211_scanparams *sp) 1922 { 1923 struct ieee80211_node *ni; 1924 1925 IEEE80211_DPRINTF(vap, IEEE80211_MSG_ASSOC, 1926 "%s: mac<%s>\n", __func__, ether_sprintf(wh->i_addr2)); 1927 ni = ieee80211_dup_bss(vap, wh->i_addr2);/* XXX alloc_node? */ 1928 if (ni != NULL) { 1929 struct ieee80211com *ic = vap->iv_ic; 1930 1931 ieee80211_init_neighbor(ni, wh, sp); 1932 if (ieee80211_iserp_rateset(&ni->ni_rates)) 1933 ni->ni_flags |= IEEE80211_NODE_ERP; 1934 ieee80211_node_setuptxparms(ni); 1935 ieee80211_ratectl_node_init(ni); 1936 if (ic->ic_newassoc != NULL) 1937 ic->ic_newassoc(ni, 1); 1938 /* XXX not right for 802.1x/WPA */ 1939 ieee80211_node_authorize(ni); 1940 } 1941 return ni; 1942 } 1943 1944 #define IS_PROBEREQ(wh) \ 1945 ((wh->i_fc[0] & (IEEE80211_FC0_TYPE_MASK|IEEE80211_FC0_SUBTYPE_MASK)) \ 1946 == (IEEE80211_FC0_TYPE_MGT | IEEE80211_FC0_SUBTYPE_PROBE_REQ)) 1947 #define IS_BCAST_PROBEREQ(wh) \ 1948 (IS_PROBEREQ(wh) && IEEE80211_IS_MULTICAST( \ 1949 ((const struct ieee80211_frame *)(wh))->i_addr3)) 1950 1951 static __inline struct ieee80211_node * 1952 _find_rxnode(struct ieee80211_node_table *nt, 1953 const struct ieee80211_frame_min *wh, 1954 const char *func __debrefcnt_used, int line __debrefcnt_used) 1955 { 1956 if (IS_BCAST_PROBEREQ(wh)) 1957 return NULL; /* spam bcast probe req to all vap's */ 1958 return _ieee80211_find_node_locked(nt, wh->i_addr2, func, line); 1959 } 1960 1961 /* 1962 * Locate the node for sender, track state, and then pass the 1963 * (referenced) node up to the 802.11 layer for its use. Note 1964 * we can return NULL if the sender is not in the table. 1965 */ 1966 struct ieee80211_node * 1967 _ieee80211_find_rxnode(struct ieee80211com *ic, 1968 const struct ieee80211_frame_min *wh, 1969 const char *func __debrefcnt_used, int line __debrefcnt_used) 1970 { 1971 struct ieee80211_node_table *nt; 1972 struct ieee80211_node *ni; 1973 1974 nt = &ic->ic_sta; 1975 IEEE80211_NODE_LOCK(nt); 1976 ni = _find_rxnode(nt, wh, func, line); 1977 IEEE80211_NODE_UNLOCK(nt); 1978 1979 return ni; 1980 } 1981 1982 /* 1983 * Like ieee80211_find_rxnode but use the supplied h/w 1984 * key index as a hint to locate the node in the key 1985 * mapping table. If an entry is present at the key 1986 * index we return it; otherwise do a normal lookup and 1987 * update the mapping table if the station has a unicast 1988 * key assigned to it. 1989 */ 1990 struct ieee80211_node * 1991 _ieee80211_find_rxnode_withkey(struct ieee80211com *ic, 1992 const struct ieee80211_frame_min *wh, ieee80211_keyix keyix, 1993 const char *func __debrefcnt_used, int line __debrefcnt_used) 1994 { 1995 struct ieee80211_node_table *nt; 1996 struct ieee80211_node *ni; 1997 1998 nt = &ic->ic_sta; 1999 IEEE80211_NODE_LOCK(nt); 2000 if (nt->nt_keyixmap != NULL && keyix < nt->nt_keyixmax) 2001 ni = nt->nt_keyixmap[keyix]; 2002 else 2003 ni = NULL; 2004 if (ni == NULL) { 2005 ni = _find_rxnode(nt, wh, func, line); 2006 if (ni != NULL && nt->nt_keyixmap != NULL) { 2007 /* 2008 * If the station has a unicast key cache slot 2009 * assigned update the key->node mapping table. 2010 */ 2011 keyix = ni->ni_ucastkey.wk_rxkeyix; 2012 /* XXX can keyixmap[keyix] != NULL? */ 2013 if (keyix < nt->nt_keyixmax && 2014 nt->nt_keyixmap[keyix] == NULL) { 2015 IEEE80211_DPRINTF(ni->ni_vap, 2016 IEEE80211_MSG_NODE, 2017 "%s: add key map entry %p<%s> refcnt %d\n", 2018 __func__, ni, ether_sprintf(ni->ni_macaddr), 2019 ieee80211_node_refcnt(ni)+1); 2020 nt->nt_keyixmap[keyix] = ieee80211_ref_node(ni); 2021 } 2022 } 2023 } else { 2024 if (IS_BCAST_PROBEREQ(wh)) 2025 ni = NULL; /* spam bcast probe req to all vap's */ 2026 else 2027 ieee80211_ref_node(ni); 2028 } 2029 IEEE80211_NODE_UNLOCK(nt); 2030 2031 return ni; 2032 } 2033 #undef IS_BCAST_PROBEREQ 2034 #undef IS_PROBEREQ 2035 2036 /* 2037 * Return a reference to the appropriate node for sending 2038 * a data frame. This handles node discovery in adhoc networks. 2039 */ 2040 struct ieee80211_node * 2041 _ieee80211_find_txnode(struct ieee80211vap *vap, 2042 const uint8_t macaddr[IEEE80211_ADDR_LEN], 2043 const char *func __debrefcnt_used, int line __debrefcnt_used) 2044 { 2045 struct ieee80211_node_table *nt = &vap->iv_ic->ic_sta; 2046 struct ieee80211_node *ni; 2047 2048 /* 2049 * The destination address should be in the node table 2050 * unless this is a multicast/broadcast frame. We can 2051 * also optimize station mode operation, all frames go 2052 * to the bss node. 2053 */ 2054 /* XXX can't hold lock across dup_bss 'cuz of recursive locking */ 2055 IEEE80211_NODE_LOCK(nt); 2056 if (vap->iv_opmode == IEEE80211_M_STA || 2057 vap->iv_opmode == IEEE80211_M_WDS || 2058 IEEE80211_IS_MULTICAST(macaddr)) 2059 ni = ieee80211_ref_node(vap->iv_bss); 2060 else 2061 ni = _ieee80211_find_node_locked(nt, macaddr, func, line); 2062 IEEE80211_NODE_UNLOCK(nt); 2063 2064 if (ni == NULL) { 2065 if (vap->iv_opmode == IEEE80211_M_IBSS || 2066 vap->iv_opmode == IEEE80211_M_AHDEMO) { 2067 /* 2068 * In adhoc mode cons up a node for the destination. 2069 * Note that we need an additional reference for the 2070 * caller to be consistent with 2071 * ieee80211_find_node_locked. 2072 */ 2073 /* 2074 * XXX TODO: this doesn't fake up 11n state; we need 2075 * to find another way to get it upgraded. 2076 */ 2077 ni = ieee80211_fakeup_adhoc_node(vap, macaddr); 2078 if (ni != NULL) 2079 (void) ieee80211_ref_node(ni); 2080 } else { 2081 IEEE80211_NOTE_MAC(vap, IEEE80211_MSG_OUTPUT, macaddr, 2082 "no node, discard frame (%s)", __func__); 2083 vap->iv_stats.is_tx_nonode++; 2084 } 2085 } 2086 return ni; 2087 } 2088 2089 struct ieee80211_node * 2090 _ieee80211_ref_node(struct ieee80211_node *ni, 2091 const char *func __debrefcnt_used, int line __debrefcnt_used) 2092 { 2093 2094 #ifdef IEEE80211_DEBUG_REFCNT 2095 IEEE80211_DPRINTF(ni->ni_vap, IEEE80211_MSG_NODE, 2096 "%s (%s:%u) %p<%s> refcnt %d\n", __func__, func, line, ni, 2097 ether_sprintf(ni->ni_macaddr), ieee80211_node_refcnt(ni)+1); 2098 #endif 2099 ieee80211_node_incref(ni); 2100 return (ni); 2101 } 2102 2103 static void 2104 __ieee80211_free_node(struct ieee80211_node *ni) 2105 { 2106 struct ieee80211_node_table *nt = ni->ni_table; 2107 2108 /* 2109 * NB: careful about referencing the vap as it may be 2110 * gone if the last reference was held by a driver. 2111 * We know the com will always be present so it's safe 2112 * to use ni_ic below to reclaim resources. 2113 */ 2114 #if 0 2115 IEEE80211_DPRINTF(vap, IEEE80211_MSG_NODE, 2116 "%s %p<%s> in %s table\n", __func__, ni, 2117 ether_sprintf(ni->ni_macaddr), 2118 nt != NULL ? nt->nt_name : "<gone>"); 2119 #endif 2120 if (ni->ni_associd != 0) { 2121 struct ieee80211vap *vap = ni->ni_vap; 2122 if (vap->iv_aid_bitmap != NULL) 2123 IEEE80211_AID_CLR(vap, ni->ni_associd); 2124 } 2125 if (nt != NULL) 2126 ieee80211_del_node_nt(nt, ni); 2127 ni->ni_ic->ic_node_free(ni); 2128 } 2129 2130 /* 2131 * Clear any entry in the unicast key mapping table. 2132 */ 2133 static int 2134 node_clear_keyixmap(struct ieee80211_node_table *nt, struct ieee80211_node *ni) 2135 { 2136 ieee80211_keyix keyix; 2137 2138 keyix = ni->ni_ucastkey.wk_rxkeyix; 2139 if (nt->nt_keyixmap != NULL && keyix < nt->nt_keyixmax && 2140 nt->nt_keyixmap[keyix] == ni) { 2141 IEEE80211_DPRINTF(ni->ni_vap, IEEE80211_MSG_NODE, 2142 "%s: %p<%s> clear key map entry %u\n", 2143 __func__, ni, ether_sprintf(ni->ni_macaddr), keyix); 2144 nt->nt_keyixmap[keyix] = NULL; 2145 ieee80211_node_decref(ni); 2146 return 1; 2147 } 2148 2149 return 0; 2150 } 2151 2152 void 2153 _ieee80211_free_node(struct ieee80211_node *ni, 2154 const char *func __debrefcnt_used, int line __debrefcnt_used) 2155 { 2156 struct ieee80211_node_table *nt = ni->ni_table; 2157 2158 #ifdef IEEE80211_DEBUG_REFCNT 2159 IEEE80211_DPRINTF(ni->ni_vap, IEEE80211_MSG_NODE, 2160 "%s (%s:%u) %p<%s> refcnt %d\n", __func__, func, line, ni, 2161 ether_sprintf(ni->ni_macaddr), ieee80211_node_refcnt(ni)-1); 2162 #endif 2163 if (nt != NULL) { 2164 IEEE80211_NODE_LOCK(nt); 2165 if (ieee80211_node_dectestref(ni)) { 2166 /* 2167 * Last reference, reclaim state. 2168 */ 2169 __ieee80211_free_node(ni); 2170 } else if (ieee80211_node_refcnt(ni) == 1) 2171 if (node_clear_keyixmap(nt, ni)) 2172 __ieee80211_free_node(ni); 2173 IEEE80211_NODE_UNLOCK(nt); 2174 } else { 2175 if (ieee80211_node_dectestref(ni)) 2176 __ieee80211_free_node(ni); 2177 } 2178 } 2179 2180 /* 2181 * Reclaim a unicast key and clear any key cache state. 2182 */ 2183 int 2184 ieee80211_node_delucastkey(struct ieee80211_node *ni) 2185 { 2186 struct ieee80211com *ic = ni->ni_ic; 2187 struct ieee80211_node_table *nt = &ic->ic_sta; 2188 struct ieee80211_node *nikey; 2189 ieee80211_keyix keyix; 2190 int isowned, status; 2191 2192 /* 2193 * NB: We must beware of LOR here; deleting the key 2194 * can cause the crypto layer to block traffic updates 2195 * which can generate a LOR against the node table lock; 2196 * grab it here and stash the key index for our use below. 2197 * 2198 * Must also beware of recursion on the node table lock. 2199 * When called from node_cleanup we may already have 2200 * the node table lock held. Unfortunately there's no 2201 * way to separate out this path so we must do this 2202 * conditionally. 2203 */ 2204 isowned = IEEE80211_NODE_IS_LOCKED(nt); 2205 if (!isowned) 2206 IEEE80211_NODE_LOCK(nt); 2207 nikey = NULL; 2208 status = 1; /* NB: success */ 2209 if (!IEEE80211_KEY_UNDEFINED(&ni->ni_ucastkey)) { 2210 keyix = ni->ni_ucastkey.wk_rxkeyix; 2211 status = ieee80211_crypto_delkey(ni->ni_vap, &ni->ni_ucastkey); 2212 if (nt->nt_keyixmap != NULL && keyix < nt->nt_keyixmax) { 2213 nikey = nt->nt_keyixmap[keyix]; 2214 nt->nt_keyixmap[keyix] = NULL; 2215 } 2216 } 2217 if (!isowned) 2218 IEEE80211_NODE_UNLOCK(nt); 2219 2220 if (nikey != NULL) { 2221 KASSERT(nikey == ni, 2222 ("key map out of sync, ni %p nikey %p", ni, nikey)); 2223 IEEE80211_DPRINTF(ni->ni_vap, IEEE80211_MSG_NODE, 2224 "%s: delete key map entry %p<%s> refcnt %d\n", 2225 __func__, ni, ether_sprintf(ni->ni_macaddr), 2226 ieee80211_node_refcnt(ni)-1); 2227 ieee80211_free_node(ni); 2228 } 2229 return status; 2230 } 2231 2232 /* 2233 * Reclaim a node. If this is the last reference count then 2234 * do the normal free work. Otherwise remove it from the node 2235 * table and mark it gone by clearing the back-reference. 2236 */ 2237 static void 2238 node_reclaim(struct ieee80211_node_table *nt, struct ieee80211_node *ni) 2239 { 2240 2241 IEEE80211_NODE_LOCK_ASSERT(nt); 2242 2243 IEEE80211_DPRINTF(ni->ni_vap, IEEE80211_MSG_NODE, 2244 "%s: remove %p<%s> from %s table, refcnt %d\n", 2245 __func__, ni, ether_sprintf(ni->ni_macaddr), 2246 nt->nt_name, ieee80211_node_refcnt(ni)-1); 2247 /* 2248 * Clear any entry in the unicast key mapping table. 2249 * We need to do it here so rx lookups don't find it 2250 * in the mapping table even if it's not in the hash 2251 * table. We cannot depend on the mapping table entry 2252 * being cleared because the node may not be free'd. 2253 */ 2254 (void)node_clear_keyixmap(nt, ni); 2255 if (!ieee80211_node_dectestref(ni)) { 2256 /* 2257 * Other references are present, just remove the 2258 * node from the table so it cannot be found. When 2259 * the references are dropped storage will be 2260 * reclaimed. 2261 */ 2262 ieee80211_del_node_nt(nt, ni); 2263 } else 2264 __ieee80211_free_node(ni); 2265 } 2266 2267 /* 2268 * Node table support. 2269 */ 2270 2271 static void 2272 ieee80211_node_table_init(struct ieee80211com *ic, 2273 struct ieee80211_node_table *nt, 2274 const char *name, int inact, int keyixmax) 2275 { 2276 2277 nt->nt_ic = ic; 2278 IEEE80211_NODE_LOCK_INIT(nt, ic->ic_name); 2279 TAILQ_INIT(&nt->nt_node); 2280 nt->nt_count = 0; 2281 nt->nt_name = name; 2282 nt->nt_inact_init = inact; 2283 nt->nt_keyixmax = keyixmax; 2284 if (nt->nt_keyixmax > 0) { 2285 nt->nt_keyixmap = (struct ieee80211_node **) IEEE80211_MALLOC( 2286 keyixmax * sizeof(struct ieee80211_node *), 2287 M_80211_NODE, 2288 IEEE80211_M_NOWAIT | IEEE80211_M_ZERO); 2289 if (nt->nt_keyixmap == NULL) 2290 ic_printf(ic, 2291 "Cannot allocate key index map with %u entries\n", 2292 keyixmax); 2293 } else 2294 nt->nt_keyixmap = NULL; 2295 } 2296 2297 static void 2298 ieee80211_node_table_reset(struct ieee80211_node_table *nt, 2299 struct ieee80211vap *match) 2300 { 2301 struct ieee80211_node *ni, *next; 2302 2303 IEEE80211_NODE_LOCK(nt); 2304 TAILQ_FOREACH_SAFE(ni, &nt->nt_node, ni_list, next) { 2305 if (match != NULL && ni->ni_vap != match) 2306 continue; 2307 /* XXX can this happen? if so need's work */ 2308 if (ni->ni_associd != 0) { 2309 struct ieee80211vap *vap = ni->ni_vap; 2310 2311 if (vap->iv_auth->ia_node_leave != NULL) 2312 vap->iv_auth->ia_node_leave(ni); 2313 if (vap->iv_aid_bitmap != NULL) 2314 IEEE80211_AID_CLR(vap, ni->ni_associd); 2315 } 2316 ni->ni_wdsvap = NULL; /* clear reference */ 2317 node_reclaim(nt, ni); 2318 } 2319 if (match != NULL && match->iv_opmode == IEEE80211_M_WDS) { 2320 /* 2321 * Make a separate pass to clear references to this vap 2322 * held by DWDS entries. They will not be matched above 2323 * because ni_vap will point to the ap vap but we still 2324 * need to clear ni_wdsvap when the WDS vap is destroyed 2325 * and/or reset. 2326 */ 2327 TAILQ_FOREACH_SAFE(ni, &nt->nt_node, ni_list, next) 2328 if (ni->ni_wdsvap == match) 2329 ni->ni_wdsvap = NULL; 2330 } 2331 IEEE80211_NODE_UNLOCK(nt); 2332 } 2333 2334 static void 2335 ieee80211_node_table_cleanup(struct ieee80211_node_table *nt) 2336 { 2337 ieee80211_node_table_reset(nt, NULL); 2338 if (nt->nt_keyixmap != NULL) { 2339 #ifdef DIAGNOSTIC 2340 /* XXX verify all entries are NULL */ 2341 int i; 2342 for (i = 0; i < nt->nt_keyixmax; i++) 2343 if (nt->nt_keyixmap[i] != NULL) 2344 printf("%s: %s[%u] still active\n", __func__, 2345 nt->nt_name, i); 2346 #endif 2347 IEEE80211_FREE(nt->nt_keyixmap, M_80211_NODE); 2348 nt->nt_keyixmap = NULL; 2349 } 2350 IEEE80211_NODE_LOCK_DESTROY(nt); 2351 } 2352 2353 static void 2354 timeout_stations(void *arg __unused, struct ieee80211_node *ni) 2355 { 2356 struct ieee80211com *ic = ni->ni_ic; 2357 struct ieee80211vap *vap = ni->ni_vap; 2358 2359 /* 2360 * Only process stations when in RUN state. This 2361 * insures, for example, that we don't timeout an 2362 * inactive station during CAC. Note that CSA state 2363 * is actually handled in ieee80211_node_timeout as 2364 * it applies to more than timeout processing. 2365 */ 2366 if (vap->iv_state != IEEE80211_S_RUN) 2367 return; 2368 /* 2369 * Ignore entries for which have yet to receive an 2370 * authentication frame. These are transient and 2371 * will be reclaimed when the last reference to them 2372 * goes away (when frame xmits complete). 2373 */ 2374 if ((vap->iv_opmode == IEEE80211_M_HOSTAP || 2375 vap->iv_opmode == IEEE80211_M_STA) && 2376 (ni->ni_flags & IEEE80211_NODE_AREF) == 0) 2377 return; 2378 /* 2379 * Free fragment if not needed anymore 2380 * (last fragment older than 1s). 2381 * XXX doesn't belong here, move to node_age 2382 */ 2383 if (ni->ni_rxfrag[0] != NULL && 2384 ticks > ni->ni_rxfragstamp + hz) { 2385 m_freem(ni->ni_rxfrag[0]); 2386 ni->ni_rxfrag[0] = NULL; 2387 } 2388 if (ni->ni_inact > 0) { 2389 ni->ni_inact--; 2390 IEEE80211_NOTE(vap, IEEE80211_MSG_INACT, ni, 2391 "%s: inact %u inact_reload %u nrates %u", 2392 __func__, ni->ni_inact, ni->ni_inact_reload, 2393 ni->ni_rates.rs_nrates); 2394 } 2395 /* 2396 * Special case ourself; we may be idle for extended periods 2397 * of time and regardless reclaiming our state is wrong. 2398 * XXX run ic_node_age 2399 */ 2400 /* XXX before inact decrement? */ 2401 if (ni == vap->iv_bss) 2402 return; 2403 if (ni->ni_associd != 0 || 2404 (vap->iv_opmode == IEEE80211_M_IBSS || 2405 vap->iv_opmode == IEEE80211_M_AHDEMO)) { 2406 /* 2407 * Age/drain resources held by the station. 2408 */ 2409 ic->ic_node_age(ni); 2410 /* 2411 * Probe the station before time it out. We 2412 * send a null data frame which may not be 2413 * universally supported by drivers (need it 2414 * for ps-poll support so it should be...). 2415 * 2416 * XXX don't probe the station unless we've 2417 * received a frame from them (and have 2418 * some idea of the rates they are capable 2419 * of); this will get fixed more properly 2420 * soon with better handling of the rate set. 2421 */ 2422 if ((vap->iv_flags_ext & IEEE80211_FEXT_INACT) && 2423 (0 < ni->ni_inact && 2424 ni->ni_inact <= vap->iv_inact_probe) && 2425 ni->ni_rates.rs_nrates != 0) { 2426 IEEE80211_NOTE(vap, 2427 IEEE80211_MSG_INACT | IEEE80211_MSG_NODE, 2428 ni, "%s", 2429 "probe station due to inactivity"); 2430 /* 2431 * Grab a reference so the node cannot 2432 * be reclaimed before we send the frame. 2433 * ieee80211_send_nulldata understands 2434 * we've done this and reclaims the 2435 * ref for us as needed. 2436 */ 2437 /* XXX fix this (not required anymore). */ 2438 ieee80211_ref_node(ni); 2439 /* XXX useless */ 2440 ieee80211_send_nulldata(ni); 2441 /* XXX stat? */ 2442 return; 2443 } 2444 } 2445 if ((vap->iv_flags_ext & IEEE80211_FEXT_INACT) && 2446 ni->ni_inact <= 0) { 2447 IEEE80211_NOTE(vap, 2448 IEEE80211_MSG_INACT | IEEE80211_MSG_NODE, ni, 2449 "station timed out due to inactivity " 2450 "(refcnt %u)", ieee80211_node_refcnt(ni)); 2451 /* 2452 * Send a deauthenticate frame and drop the station. 2453 * This is somewhat complicated due to reference counts 2454 * and locking. At this point a station will typically 2455 * have a reference count of 2. ieee80211_node_leave 2456 * will do a "free" of the node which will drop the 2457 * reference count. But in the meantime a reference 2458 * wil be held by the deauth frame. The actual reclaim 2459 * of the node will happen either after the tx is 2460 * completed or by ieee80211_node_leave. 2461 */ 2462 if (ni->ni_associd != 0) { 2463 IEEE80211_SEND_MGMT(ni, 2464 IEEE80211_FC0_SUBTYPE_DEAUTH, 2465 IEEE80211_REASON_AUTH_EXPIRE); 2466 } 2467 ieee80211_node_leave(ni); 2468 vap->iv_stats.is_node_timeout++; 2469 } 2470 } 2471 2472 /* 2473 * Timeout inactive stations and do related housekeeping. 2474 */ 2475 static void 2476 ieee80211_timeout_stations(struct ieee80211com *ic) 2477 { 2478 struct ieee80211_node_table *nt = &ic->ic_sta; 2479 2480 ieee80211_iterate_nodes(nt, timeout_stations, NULL); 2481 } 2482 2483 /* 2484 * Aggressively reclaim resources. This should be used 2485 * only in a critical situation to reclaim mbuf resources. 2486 */ 2487 void 2488 ieee80211_drain(struct ieee80211com *ic) 2489 { 2490 struct ieee80211_node_table *nt = &ic->ic_sta; 2491 struct ieee80211vap *vap; 2492 struct ieee80211_node *ni; 2493 2494 IEEE80211_NODE_LOCK(nt); 2495 TAILQ_FOREACH(ni, &nt->nt_node, ni_list) { 2496 /* 2497 * Ignore entries for which have yet to receive an 2498 * authentication frame. These are transient and 2499 * will be reclaimed when the last reference to them 2500 * goes away (when frame xmits complete). 2501 */ 2502 vap = ni->ni_vap; 2503 /* 2504 * Only process stations when in RUN state. This 2505 * insures, for example, that we don't timeout an 2506 * inactive station during CAC. Note that CSA state 2507 * is actually handled in ieee80211_node_timeout as 2508 * it applies to more than timeout processing. 2509 */ 2510 if (vap->iv_state != IEEE80211_S_RUN) 2511 continue; 2512 /* XXX can vap be NULL? */ 2513 if ((vap->iv_opmode == IEEE80211_M_HOSTAP || 2514 vap->iv_opmode == IEEE80211_M_STA) && 2515 (ni->ni_flags & IEEE80211_NODE_AREF) == 0) 2516 continue; 2517 /* 2518 * Free fragments. 2519 * XXX doesn't belong here, move to node_drain 2520 */ 2521 if (ni->ni_rxfrag[0] != NULL) { 2522 m_freem(ni->ni_rxfrag[0]); 2523 ni->ni_rxfrag[0] = NULL; 2524 } 2525 /* 2526 * Drain resources held by the station. 2527 */ 2528 ic->ic_node_drain(ni); 2529 } 2530 IEEE80211_NODE_UNLOCK(nt); 2531 } 2532 2533 /* 2534 * Per-ieee80211vap inactivity timer callback. 2535 */ 2536 static void 2537 ieee80211_vap_timeout(struct ieee80211vap *vap) 2538 { 2539 2540 IEEE80211_LOCK_ASSERT(vap->iv_ic); 2541 2542 ieee80211_vap_erp_timeout(vap); 2543 ieee80211_ht_timeout(vap); 2544 ieee80211_vht_timeout(vap); 2545 } 2546 2547 /* 2548 * Per-ieee80211com inactivity timer callback. 2549 */ 2550 void 2551 ieee80211_node_timeout(void *arg) 2552 { 2553 struct ieee80211com *ic = arg; 2554 struct ieee80211vap *vap; 2555 2556 /* 2557 * Defer timeout processing if a channel switch is pending. 2558 * We typically need to be mute so not doing things that 2559 * might generate frames is good to handle in one place. 2560 * Suppressing the station timeout processing may extend the 2561 * lifetime of inactive stations (by not decrementing their 2562 * idle counters) but this should be ok unless the CSA is 2563 * active for an unusually long time. 2564 */ 2565 if ((ic->ic_flags & IEEE80211_F_CSAPENDING) == 0) { 2566 ieee80211_scan_timeout(ic); 2567 ieee80211_timeout_stations(ic); 2568 ieee80211_ageq_age(&ic->ic_stageq, IEEE80211_INACT_WAIT); 2569 2570 IEEE80211_LOCK(ic); 2571 TAILQ_FOREACH(vap, &ic->ic_vaps, iv_next) 2572 ieee80211_vap_timeout(vap); 2573 IEEE80211_UNLOCK(ic); 2574 } 2575 callout_reset(&ic->ic_inact, IEEE80211_INACT_WAIT*hz, 2576 ieee80211_node_timeout, ic); 2577 } 2578 2579 /* 2580 * The same as ieee80211_iterate_nodes(), but for one vap only. 2581 */ 2582 int 2583 ieee80211_iterate_nodes_vap(struct ieee80211_node_table *nt, 2584 struct ieee80211vap *vap, ieee80211_iter_func *f, void *arg) 2585 { 2586 struct ieee80211_node **ni_arr; 2587 struct ieee80211_node *ni; 2588 size_t size; 2589 int count, i; 2590 2591 /* 2592 * Iterate over the node table and save an array of ref'ed nodes. 2593 * 2594 * This is separated out from calling the actual node function so that 2595 * no LORs will occur. 2596 */ 2597 IEEE80211_NODE_LOCK(nt); 2598 count = nt->nt_count; 2599 size = count * sizeof(struct ieee80211_node *); 2600 ni_arr = (struct ieee80211_node **) IEEE80211_MALLOC(size, M_80211_NODE, 2601 IEEE80211_M_NOWAIT | IEEE80211_M_ZERO); 2602 if (ni_arr == NULL) { 2603 IEEE80211_NODE_UNLOCK(nt); 2604 return (ENOMEM); 2605 } 2606 2607 i = 0; 2608 TAILQ_FOREACH(ni, &nt->nt_node, ni_list) { 2609 if (vap != NULL && ni->ni_vap != vap) 2610 continue; 2611 KASSERT(i < count, 2612 ("node array overflow (vap %p, i %d, count %d)\n", 2613 vap, i, count)); 2614 ni_arr[i] = ieee80211_ref_node(ni); 2615 i++; 2616 } 2617 IEEE80211_NODE_UNLOCK(nt); 2618 2619 for (i = 0; i < count; i++) { 2620 if (ni_arr[i] == NULL) /* end of the list */ 2621 break; 2622 (*f)(arg, ni_arr[i]); 2623 /* ieee80211_free_node() locks by itself */ 2624 ieee80211_free_node(ni_arr[i]); 2625 } 2626 2627 IEEE80211_FREE(ni_arr, M_80211_NODE); 2628 2629 return (0); 2630 } 2631 2632 /* 2633 * Just a wrapper, so we don't have to change every ieee80211_iterate_nodes() 2634 * reference in the source. 2635 */ 2636 void 2637 ieee80211_iterate_nodes(struct ieee80211_node_table *nt, 2638 ieee80211_iter_func *f, void *arg) 2639 { 2640 /* XXX no way to pass error to the caller. */ 2641 (void) ieee80211_iterate_nodes_vap(nt, NULL, f, arg); 2642 } 2643 2644 void 2645 ieee80211_dump_node(struct ieee80211_node_table *nt __unused, 2646 struct ieee80211_node *ni) 2647 { 2648 printf("%p: mac %s refcnt %d\n", ni, 2649 ether_sprintf(ni->ni_macaddr), ieee80211_node_refcnt(ni)); 2650 printf("\tauthmode %u flags 0x%x\n", 2651 ni->ni_authmode, ni->ni_flags); 2652 printf("\tassocid 0x%x txpower %u vlan %u\n", 2653 ni->ni_associd, ni->ni_txpower, ni->ni_vlan); 2654 printf("\ttxseq %u rxseq %u fragno %u rxfragstamp %u\n", 2655 ni->ni_txseqs[IEEE80211_NONQOS_TID], 2656 ni->ni_rxseqs[IEEE80211_NONQOS_TID] >> IEEE80211_SEQ_SEQ_SHIFT, 2657 ni->ni_rxseqs[IEEE80211_NONQOS_TID] & IEEE80211_SEQ_FRAG_MASK, 2658 ni->ni_rxfragstamp); 2659 printf("\trssi %d noise %d intval %u capinfo 0x%x\n", 2660 node_getrssi(ni), ni->ni_noise, 2661 ni->ni_intval, ni->ni_capinfo); 2662 printf("\tbssid %s essid \"%.*s\" channel %u:0x%x\n", 2663 ether_sprintf(ni->ni_bssid), 2664 ni->ni_esslen, ni->ni_essid, 2665 (ni->ni_chan != IEEE80211_CHAN_ANYC) ? ni->ni_chan->ic_freq : 0, 2666 (ni->ni_chan != IEEE80211_CHAN_ANYC) ? ni->ni_chan->ic_flags : 0); 2667 printf("\tinact %u inact_reload %u txrate type %d dot11rate %u\n", 2668 ni->ni_inact, ni->ni_inact_reload, 2669 ni->ni_txrate.type, 2670 ni->ni_txrate.dot11rate); 2671 printf("\thtcap %x htparam %x htctlchan %u ht2ndchan %u\n", 2672 ni->ni_htcap, ni->ni_htparam, 2673 ni->ni_htctlchan, ni->ni_ht2ndchan); 2674 printf("\thtopmode %x htstbc %x htchw %d (%s)\n", 2675 ni->ni_htopmode, ni->ni_htstbc, 2676 ni->ni_chw, ieee80211_ni_chw_to_str(ni->ni_chw)); 2677 printf("\tvhtcap %x freq1 %d freq2 %d vhtbasicmcs %x\n", 2678 ni->ni_vhtcap, (int) ni->ni_vht_chan1, (int) ni->ni_vht_chan2, 2679 (int) ni->ni_vht_basicmcs); 2680 /* XXX VHT state */ 2681 } 2682 2683 void 2684 ieee80211_dump_nodes(struct ieee80211_node_table *nt) 2685 { 2686 ieee80211_iterate_nodes(nt, 2687 (ieee80211_iter_func *) ieee80211_dump_node, nt); 2688 } 2689 2690 /* 2691 * Iterate over the VAPs and update their ERP beacon IEs. 2692 * 2693 * Note this must be called from the deferred ERP update task paths. 2694 */ 2695 void 2696 ieee80211_notify_erp_locked(struct ieee80211com *ic) 2697 { 2698 struct ieee80211vap *vap; 2699 2700 IEEE80211_LOCK_ASSERT(ic); 2701 2702 TAILQ_FOREACH(vap, &ic->ic_vaps, iv_next) 2703 if (vap->iv_opmode == IEEE80211_M_HOSTAP) 2704 ieee80211_beacon_notify(vap, IEEE80211_BEACON_ERP); 2705 } 2706 2707 /* 2708 * Handle a station joining an 11g network. 2709 */ 2710 static void 2711 ieee80211_node_join_11g(struct ieee80211_node *ni) 2712 { 2713 struct ieee80211com *ic = ni->ni_ic; 2714 struct ieee80211vap *vap = ni->ni_vap; 2715 2716 IEEE80211_LOCK_ASSERT(ic); 2717 2718 /* 2719 * Station isn't capable of short slot time. Bump 2720 * the count of long slot time stations and disable 2721 * use of short slot time. Note that the actual switch 2722 * over to long slot time use may not occur until the 2723 * next beacon transmission (per sec. 7.3.1.4 of 11g). 2724 */ 2725 if ((ni->ni_capinfo & IEEE80211_CAPINFO_SHORT_SLOTTIME) == 0) { 2726 vap->iv_longslotsta++; 2727 IEEE80211_NOTE(ni->ni_vap, IEEE80211_MSG_ASSOC, ni, 2728 "station needs long slot time, count %d", 2729 vap->iv_longslotsta); 2730 /* 2731 * XXX TODO: this may need all VAPs checked! 2732 */ 2733 if (!IEEE80211_IS_CHAN_108G(ic->ic_bsschan)) { 2734 /* 2735 * Don't force slot time when switched to turbo 2736 * mode as non-ERP stations won't be present; this 2737 * need only be done when on the normal G channel. 2738 */ 2739 ieee80211_vap_set_shortslottime(vap, 0); 2740 } 2741 } 2742 /* 2743 * If the new station is not an ERP station 2744 * then bump the counter and enable protection 2745 * if configured. 2746 */ 2747 if (!ieee80211_iserp_rateset(&ni->ni_rates)) { 2748 vap->iv_nonerpsta++; 2749 IEEE80211_NOTE(ni->ni_vap, IEEE80211_MSG_ASSOC, ni, 2750 "station is !ERP, %d non-ERP stations associated", 2751 vap->iv_nonerpsta); 2752 /* 2753 * If station does not support short preamble 2754 * then we must enable use of Barker preamble. 2755 */ 2756 if ((ni->ni_capinfo & IEEE80211_CAPINFO_SHORT_PREAMBLE) == 0) { 2757 IEEE80211_NOTE(ni->ni_vap, IEEE80211_MSG_ASSOC, ni, 2758 "%s", "station needs long preamble"); 2759 vap->iv_flags |= IEEE80211_F_USEBARKER; 2760 vap->iv_flags &= ~IEEE80211_F_SHPREAMBLE; 2761 ieee80211_vap_update_preamble(vap); 2762 } 2763 /* 2764 * If protection is configured and this is the first 2765 * indication we should use protection, enable it. 2766 */ 2767 if (vap->iv_protmode != IEEE80211_PROT_NONE && 2768 vap->iv_nonerpsta == 1 && 2769 (vap->iv_flags_ext & IEEE80211_FEXT_NONERP_PR) == 0) { 2770 IEEE80211_DPRINTF(ni->ni_vap, IEEE80211_MSG_ASSOC, 2771 "%s: enable use of protection\n", __func__); 2772 vap->iv_flags |= IEEE80211_F_USEPROT; 2773 ieee80211_vap_update_erp_protmode(vap); 2774 } 2775 } else 2776 ni->ni_flags |= IEEE80211_NODE_ERP; 2777 } 2778 2779 void 2780 ieee80211_node_join(struct ieee80211_node *ni, int resp) 2781 { 2782 struct ieee80211com *ic = ni->ni_ic; 2783 struct ieee80211vap *vap = ni->ni_vap; 2784 int newassoc; 2785 2786 if (ni->ni_associd == 0) { 2787 uint16_t aid; 2788 2789 KASSERT(vap->iv_aid_bitmap != NULL, ("no aid bitmap")); 2790 /* 2791 * It would be good to search the bitmap 2792 * more efficiently, but this will do for now. 2793 */ 2794 for (aid = 1; aid < vap->iv_max_aid; aid++) { 2795 if (!IEEE80211_AID_ISSET(vap, aid)) 2796 break; 2797 } 2798 if (aid >= vap->iv_max_aid) { 2799 IEEE80211_SEND_MGMT(ni, resp, IEEE80211_STATUS_TOOMANY); 2800 ieee80211_node_leave(ni); 2801 return; 2802 } 2803 ni->ni_associd = aid | 0xc000; 2804 ni->ni_jointime = time_uptime; 2805 IEEE80211_LOCK(ic); 2806 IEEE80211_AID_SET(vap, ni->ni_associd); 2807 vap->iv_sta_assoc++; 2808 2809 if (IEEE80211_IS_CHAN_HT(ic->ic_bsschan)) 2810 ieee80211_ht_node_join(ni); 2811 if (IEEE80211_IS_CHAN_VHT(ic->ic_bsschan)) 2812 ieee80211_vht_node_join(ni); 2813 if (IEEE80211_IS_CHAN_ANYG(ic->ic_bsschan) && 2814 IEEE80211_IS_CHAN_FULL(ic->ic_bsschan)) 2815 ieee80211_node_join_11g(ni); 2816 IEEE80211_UNLOCK(ic); 2817 2818 newassoc = 1; 2819 } else 2820 newassoc = 0; 2821 2822 /* 2823 * XXX VHT - should log VHT channel width, etc 2824 */ 2825 IEEE80211_NOTE(vap, IEEE80211_MSG_ASSOC | IEEE80211_MSG_DEBUG, ni, 2826 "station associated at aid %d: %s preamble, %s slot time%s%s%s%s%s%s%s%s%s", 2827 IEEE80211_NODE_AID(ni), 2828 vap->iv_flags & IEEE80211_F_SHPREAMBLE ? "short" : "long", 2829 vap->iv_flags & IEEE80211_F_SHSLOT ? "short" : "long", 2830 vap->iv_flags & IEEE80211_F_USEPROT ? ", protection" : "", 2831 ni->ni_flags & IEEE80211_NODE_QOS ? ", QoS" : "", 2832 /* XXX update for VHT string */ 2833 ni->ni_flags & IEEE80211_NODE_HT ? 2834 (ni->ni_chw == IEEE80211_STA_RX_BW_40 ? ", HT40" : ", HT20") : "", 2835 ni->ni_flags & IEEE80211_NODE_AMPDU ? " (+AMPDU)" : "", 2836 ni->ni_flags & IEEE80211_NODE_AMSDU ? " (+AMSDU)" : "", 2837 ni->ni_flags & IEEE80211_NODE_MIMO_RTS ? " (+SMPS-DYN)" : 2838 ni->ni_flags & IEEE80211_NODE_MIMO_PS ? " (+SMPS)" : "", 2839 ni->ni_flags & IEEE80211_NODE_RIFS ? " (+RIFS)" : "", 2840 IEEE80211_ATH_CAP(vap, ni, IEEE80211_NODE_FF) ? 2841 ", fast-frames" : "", 2842 IEEE80211_ATH_CAP(vap, ni, IEEE80211_NODE_TURBOP) ? 2843 ", turbo" : "" 2844 ); 2845 2846 ieee80211_node_setuptxparms(ni); 2847 ieee80211_ratectl_node_init(ni); 2848 /* give driver a chance to setup state like ni_txrate */ 2849 if (ic->ic_newassoc != NULL) 2850 ic->ic_newassoc(ni, newassoc); 2851 IEEE80211_SEND_MGMT(ni, resp, IEEE80211_STATUS_SUCCESS); 2852 /* tell the authenticator about new station */ 2853 if (vap->iv_auth->ia_node_join != NULL) 2854 vap->iv_auth->ia_node_join(ni); 2855 ieee80211_notify_node_join(ni, 2856 resp == IEEE80211_FC0_SUBTYPE_ASSOC_RESP); 2857 } 2858 2859 static void 2860 disable_protection(struct ieee80211vap *vap) 2861 { 2862 struct ieee80211com *ic = vap->iv_ic; 2863 2864 KASSERT(vap->iv_nonerpsta == 0 && 2865 (vap->iv_flags_ext & IEEE80211_FEXT_NONERP_PR) == 0, 2866 ("%d non ERP stations, flags 0x%x", vap->iv_nonerpsta, 2867 vap->iv_flags_ext)); 2868 2869 vap->iv_flags &= ~IEEE80211_F_USEPROT; 2870 /* XXX verify mode? */ 2871 if (ic->ic_caps & IEEE80211_C_SHPREAMBLE) { 2872 vap->iv_flags |= IEEE80211_F_SHPREAMBLE; 2873 vap->iv_flags &= ~IEEE80211_F_USEBARKER; 2874 } 2875 ieee80211_vap_update_erp_protmode(vap); 2876 ieee80211_vap_update_preamble(vap); 2877 } 2878 2879 /* 2880 * Handle a station leaving an 11g network. 2881 */ 2882 static void 2883 ieee80211_node_leave_11g(struct ieee80211_node *ni) 2884 { 2885 struct ieee80211com *ic = ni->ni_ic; 2886 struct ieee80211vap *vap = ni->ni_vap; 2887 2888 IEEE80211_LOCK_ASSERT(ic); 2889 2890 KASSERT(IEEE80211_IS_CHAN_ANYG(ic->ic_bsschan), 2891 ("not in 11g, bss %u:0x%x", ic->ic_bsschan->ic_freq, 2892 ic->ic_bsschan->ic_flags)); 2893 2894 /* 2895 * If a long slot station do the slot time bookkeeping. 2896 */ 2897 if ((ni->ni_capinfo & IEEE80211_CAPINFO_SHORT_SLOTTIME) == 0) { 2898 KASSERT(vap->iv_longslotsta > 0, 2899 ("bogus long slot station count %d", vap->iv_longslotsta)); 2900 vap->iv_longslotsta--; 2901 IEEE80211_NOTE(ni->ni_vap, IEEE80211_MSG_ASSOC, ni, 2902 "long slot time station leaves, count now %d", 2903 vap->iv_longslotsta); 2904 /* 2905 * XXX TODO: this may need all VAPs checked! 2906 */ 2907 if (vap->iv_longslotsta == 0) { 2908 /* 2909 * Re-enable use of short slot time if supported 2910 * and not operating in IBSS mode (per spec). 2911 */ 2912 if ((ic->ic_caps & IEEE80211_C_SHSLOT) && 2913 ic->ic_opmode != IEEE80211_M_IBSS) { 2914 IEEE80211_DPRINTF(ni->ni_vap, 2915 IEEE80211_MSG_ASSOC, 2916 "%s: re-enable use of short slot time\n", 2917 __func__); 2918 ieee80211_vap_set_shortslottime(vap, 1); 2919 } 2920 } 2921 } 2922 /* 2923 * If a non-ERP station do the protection-related bookkeeping. 2924 */ 2925 if ((ni->ni_flags & IEEE80211_NODE_ERP) == 0) { 2926 KASSERT(vap->iv_nonerpsta > 0, 2927 ("bogus non-ERP station count %d", vap->iv_nonerpsta)); 2928 vap->iv_nonerpsta--; 2929 IEEE80211_NOTE(ni->ni_vap, IEEE80211_MSG_ASSOC, ni, 2930 "non-ERP station leaves, count now %d%s", vap->iv_nonerpsta, 2931 (vap->iv_flags_ext & IEEE80211_FEXT_NONERP_PR) ? 2932 " (non-ERP sta present)" : ""); 2933 if (vap->iv_nonerpsta == 0 && 2934 (vap->iv_flags_ext & IEEE80211_FEXT_NONERP_PR) == 0) { 2935 IEEE80211_DPRINTF(ni->ni_vap, IEEE80211_MSG_ASSOC, 2936 "%s: disable use of protection\n", __func__); 2937 disable_protection(vap); 2938 } 2939 } 2940 } 2941 2942 /* 2943 * Time out presence of an overlapping bss with non-ERP 2944 * stations. When operating in hostap mode we listen for 2945 * beacons from other stations and if we identify a non-ERP 2946 * station is present we enable protection. To identify 2947 * when all non-ERP stations are gone we time out this 2948 * condition. 2949 */ 2950 static void 2951 ieee80211_vap_erp_timeout(struct ieee80211vap *vap) 2952 { 2953 2954 IEEE80211_LOCK_ASSERT(vap->iv_ic); 2955 2956 if ((vap->iv_flags_ext & IEEE80211_FEXT_NONERP_PR) && 2957 ieee80211_time_after(ticks, vap->iv_lastnonerp + IEEE80211_NONERP_PRESENT_AGE)) { 2958 IEEE80211_DPRINTF(vap, IEEE80211_MSG_ASSOC, 2959 "%s", "age out non-ERP sta present on channel"); 2960 vap->iv_flags_ext &= ~IEEE80211_FEXT_NONERP_PR; 2961 if (vap->iv_nonerpsta == 0) 2962 disable_protection(vap); 2963 } 2964 } 2965 2966 /* 2967 * Handle bookkeeping for station deauthentication/disassociation 2968 * when operating as an ap. 2969 */ 2970 void 2971 ieee80211_node_leave(struct ieee80211_node *ni) 2972 { 2973 struct ieee80211com *ic = ni->ni_ic; 2974 struct ieee80211vap *vap = ni->ni_vap; 2975 struct ieee80211_node_table *nt = ni->ni_table; 2976 2977 IEEE80211_NOTE(vap, IEEE80211_MSG_ASSOC | IEEE80211_MSG_DEBUG, ni, 2978 "station with aid %d leaves", IEEE80211_NODE_AID(ni)); 2979 2980 KASSERT(vap->iv_opmode != IEEE80211_M_STA, 2981 ("unexpected operating mode %u", vap->iv_opmode)); 2982 /* 2983 * If node wasn't previously associated all 2984 * we need to do is reclaim the reference. 2985 */ 2986 /* XXX ibss mode bypasses 11g and notification */ 2987 if (ni->ni_associd == 0) 2988 goto done; 2989 /* 2990 * Tell the authenticator the station is leaving. 2991 * Note that we must do this before yanking the 2992 * association id as the authenticator uses the 2993 * associd to locate it's state block. 2994 */ 2995 if (vap->iv_auth->ia_node_leave != NULL) 2996 vap->iv_auth->ia_node_leave(ni); 2997 2998 IEEE80211_LOCK(ic); 2999 IEEE80211_AID_CLR(vap, ni->ni_associd); 3000 vap->iv_sta_assoc--; 3001 3002 if (IEEE80211_IS_CHAN_VHT(ic->ic_bsschan)) 3003 ieee80211_vht_node_leave(ni); 3004 if (IEEE80211_IS_CHAN_HT(ic->ic_bsschan)) 3005 ieee80211_ht_node_leave(ni); 3006 if (IEEE80211_IS_CHAN_ANYG(ic->ic_bsschan) && 3007 IEEE80211_IS_CHAN_FULL(ic->ic_bsschan)) 3008 ieee80211_node_leave_11g(ni); 3009 IEEE80211_UNLOCK(ic); 3010 /* 3011 * Cleanup station state. In particular clear various 3012 * state that might otherwise be reused if the node 3013 * is reused before the reference count goes to zero 3014 * (and memory is reclaimed). 3015 */ 3016 ieee80211_sta_leave(ni); 3017 done: 3018 /* 3019 * Remove the node from any table it's recorded in and 3020 * drop the caller's reference. Removal from the table 3021 * is important to insure the node is not reprocessed 3022 * for inactivity. 3023 */ 3024 if (nt != NULL) { 3025 IEEE80211_NODE_LOCK(nt); 3026 node_reclaim(nt, ni); 3027 IEEE80211_NODE_UNLOCK(nt); 3028 } else 3029 ieee80211_free_node(ni); 3030 } 3031 3032 struct rssiinfo { 3033 int rssi_samples; 3034 uint32_t rssi_total; 3035 }; 3036 3037 static void 3038 get_hostap_rssi(void *arg, struct ieee80211_node *ni) 3039 { 3040 struct rssiinfo *info = arg; 3041 struct ieee80211vap *vap = ni->ni_vap; 3042 int8_t rssi; 3043 3044 /* only associated stations */ 3045 if (ni->ni_associd == 0) 3046 return; 3047 rssi = vap->iv_ic->ic_node_getrssi(ni); 3048 if (rssi != 0) { 3049 info->rssi_samples++; 3050 info->rssi_total += rssi; 3051 } 3052 } 3053 3054 static void 3055 get_adhoc_rssi(void *arg, struct ieee80211_node *ni) 3056 { 3057 struct rssiinfo *info = arg; 3058 struct ieee80211vap *vap = ni->ni_vap; 3059 int8_t rssi; 3060 3061 /* only neighbors */ 3062 /* XXX check bssid */ 3063 if ((ni->ni_capinfo & IEEE80211_CAPINFO_IBSS) == 0) 3064 return; 3065 rssi = vap->iv_ic->ic_node_getrssi(ni); 3066 if (rssi != 0) { 3067 info->rssi_samples++; 3068 info->rssi_total += rssi; 3069 } 3070 } 3071 3072 #ifdef IEEE80211_SUPPORT_MESH 3073 static void 3074 get_mesh_rssi(void *arg, struct ieee80211_node *ni) 3075 { 3076 struct rssiinfo *info = arg; 3077 struct ieee80211vap *vap = ni->ni_vap; 3078 int8_t rssi; 3079 3080 /* only neighbors that peered successfully */ 3081 if (ni->ni_mlstate != IEEE80211_NODE_MESH_ESTABLISHED) 3082 return; 3083 rssi = vap->iv_ic->ic_node_getrssi(ni); 3084 if (rssi != 0) { 3085 info->rssi_samples++; 3086 info->rssi_total += rssi; 3087 } 3088 } 3089 #endif /* IEEE80211_SUPPORT_MESH */ 3090 3091 int8_t 3092 ieee80211_getrssi(struct ieee80211vap *vap) 3093 { 3094 #define NZ(x) ((x) == 0 ? 1 : (x)) 3095 struct ieee80211com *ic = vap->iv_ic; 3096 struct rssiinfo info; 3097 3098 info.rssi_total = 0; 3099 info.rssi_samples = 0; 3100 switch (vap->iv_opmode) { 3101 case IEEE80211_M_IBSS: /* average of all ibss neighbors */ 3102 case IEEE80211_M_AHDEMO: /* average of all neighbors */ 3103 ieee80211_iterate_nodes_vap(&ic->ic_sta, vap, get_adhoc_rssi, 3104 &info); 3105 break; 3106 case IEEE80211_M_HOSTAP: /* average of all associated stations */ 3107 ieee80211_iterate_nodes_vap(&ic->ic_sta, vap, get_hostap_rssi, 3108 &info); 3109 break; 3110 #ifdef IEEE80211_SUPPORT_MESH 3111 case IEEE80211_M_MBSS: /* average of all mesh neighbors */ 3112 ieee80211_iterate_nodes_vap(&ic->ic_sta, vap, get_mesh_rssi, 3113 &info); 3114 break; 3115 #endif 3116 case IEEE80211_M_MONITOR: /* XXX */ 3117 case IEEE80211_M_STA: /* use stats from associated ap */ 3118 default: 3119 if (vap->iv_bss != NULL) 3120 info.rssi_total = ic->ic_node_getrssi(vap->iv_bss); 3121 info.rssi_samples = 1; 3122 break; 3123 } 3124 return info.rssi_total / NZ(info.rssi_samples); 3125 #undef NZ 3126 } 3127 3128 void 3129 ieee80211_getsignal(struct ieee80211vap *vap, int8_t *rssi, int8_t *noise) 3130 { 3131 3132 if (vap->iv_bss == NULL) /* NB: shouldn't happen */ 3133 return; 3134 vap->iv_ic->ic_node_getsignal(vap->iv_bss, rssi, noise); 3135 /* for non-station mode return avg'd rssi accounting */ 3136 if (vap->iv_opmode != IEEE80211_M_STA) 3137 *rssi = ieee80211_getrssi(vap); 3138 } 3139 3140 /** 3141 * @brief return a dot11rate / ratecode representing the current transmit rate 3142 * 3143 * This is the API call for legacy / 802.11n drivers and rate control APIs 3144 * which expect a dot11rate / ratecode representation for legacy and HT MCS 3145 * rates. 3146 * 3147 * Drivers which support VHT should not use this API, as it will log an error 3148 * and return a low rate if a VHT rate is selected. 3149 * 3150 * @param ni the ieee80211_node to return the transmit rate for 3151 * @returns the dot11rate / ratecode for legacy/MCS, or the 3152 * lowest available dot11rate if it's VHT (and shouldn't 3153 * have been called.) 3154 */ 3155 uint8_t 3156 ieee80211_node_get_txrate_dot11rate(struct ieee80211_node *ni) 3157 { 3158 switch (ni->ni_txrate.type) { 3159 case IEEE80211_NODE_TXRATE_LEGACY: 3160 case IEEE80211_NODE_TXRATE_HT: 3161 return (ni->ni_txrate.dot11rate); 3162 break; 3163 case IEEE80211_NODE_TXRATE_VHT: 3164 default: 3165 printf("%s: called for VHT / unknown rate (type %d)!\n", 3166 __func__, ni->ni_txrate.type); 3167 return (12); /* OFDM6 for now */ 3168 } 3169 } 3170 3171 /** 3172 * @brief return the txrate representing the current transmit rate 3173 * 3174 * This is the API call for drivers and rate control APIs to fetch 3175 * rates. It will populate a struct ieee80211_node_txrate with the 3176 * current rate configuration to use. 3177 * 3178 * @param ni the ieee80211_node to return the transmit rate for 3179 * @param txrate the struct ieee80211_node_txrate to populate 3180 */ 3181 void 3182 ieee80211_node_get_txrate(struct ieee80211_node *ni, 3183 struct ieee80211_node_txrate *txr) 3184 { 3185 MPASS(ni != NULL); 3186 MPASS(txr != NULL); 3187 3188 *txr = ni->ni_txrate; 3189 } 3190 3191 /** 3192 * @brief Set the txrate representing the current transmit rate 3193 * 3194 * This is the API call for drivers and rate control APIs to set 3195 * rates. It will copy a struct ieee80211_node_txrate with the 3196 * current rate configuration to use. 3197 * 3198 * @param ni the ieee80211_node to return the transmit rate for 3199 * @param txrate the struct ieee80211_node_txrate to copy to the node 3200 */ 3201 void 3202 ieee80211_node_set_txrate(struct ieee80211_node *ni, 3203 const struct ieee80211_node_txrate *txr) 3204 { 3205 MPASS(ni != NULL); 3206 MPASS(txr != NULL); 3207 3208 ni->ni_txrate = *txr; 3209 } 3210 3211 /** 3212 * @brief set the dot11rate / ratecode representing the current transmit rate 3213 * 3214 * This is the API call for legacy / 802.11n drivers and rate control APIs 3215 * which expect a dot11rate / ratecode representation for legacy and HT MCS 3216 * rates. 3217 * 3218 * @param ni the ieee80211_node to return the transmit rate for 3219 * @param dot11rate the dot11rate rate code to use 3220 */ 3221 void 3222 ieee80211_node_set_txrate_dot11rate(struct ieee80211_node *ni, 3223 uint8_t dot11Rate) 3224 { 3225 if (dot11Rate & IEEE80211_RATE_MCS) { 3226 ni->ni_txrate.type = IEEE80211_NODE_TXRATE_HT; 3227 ni->ni_txrate.mcs = dot11Rate & IEEE80211_RATE_VAL; 3228 ni->ni_txrate.nss = 0; 3229 ni->ni_txrate.dot11rate = dot11Rate; 3230 } else { 3231 ni->ni_txrate.type = IEEE80211_NODE_TXRATE_LEGACY; 3232 ni->ni_txrate.mcs = ni->ni_txrate.nss = 0; 3233 ni->ni_txrate.dot11rate = dot11Rate; 3234 } 3235 } 3236 3237 /** 3238 * @brief set the dot11rate / ratecode representing the current HT transmit rate 3239 * 3240 * This is the API call for 802.11n drivers and rate control APIs 3241 * which expect a dot11rate / ratecode representation for legacy and HT MCS 3242 * rates. It expects an MCS rate code from 0 .. 76. 3243 * 3244 * @param ni the ieee80211_node to return the transmit rate for 3245 * @param mcs the MCS rate to select 3246 */ 3247 void 3248 ieee80211_node_set_txrate_ht_mcsrate(struct ieee80211_node *ni, 3249 uint8_t mcs) 3250 { 3251 KASSERT(mcs <= 76, ("%s: MCS is not 0..76 (%d)", __func__, mcs)); 3252 if (mcs > 76) { 3253 ic_printf(ni->ni_ic, "%s: invalid MCS (%d)\n", __func__, mcs); 3254 return; 3255 } 3256 3257 ni->ni_txrate.type = IEEE80211_NODE_TXRATE_HT; 3258 ni->ni_txrate.mcs = mcs; 3259 ni->ni_txrate.nss = 0; 3260 ni->ni_txrate.dot11rate = IEEE80211_RATE_MCS | mcs; 3261 } 3262 3263 /** 3264 * @brief set the rate to the given VHT transmission rate. 3265 * 3266 * This sets the current transmit rate to the given VHT NSS/MCS. 3267 * 3268 * @param ni the ieee80211_node to set the transmit rate for 3269 * @param nss the number of spatial streams 3270 * @param mcs the MCS rate to select 3271 */ 3272 void 3273 ieee80211_node_set_txrate_vht_rate(struct ieee80211_node *ni, 3274 uint8_t nss, uint8_t mcs) 3275 { 3276 MPASS(ni != NULL); 3277 3278 ni->ni_txrate.type = IEEE80211_NODE_TXRATE_VHT; 3279 ni->ni_txrate.mcs = mcs; 3280 ni->ni_txrate.nss = nss; 3281 ni->ni_txrate.dot11rate = 0; 3282 } 3283 3284 /* 3285 * @brief Fetch the transmit rate for the given node in kbit/s. 3286 * 3287 * This currently only works for CCK, OFDM and HT rates. 3288 * 3289 * @param ni struct ieee80211_node * to lookup 3290 * @returns current transmit rate in kbit/s 3291 */ 3292 uint32_t 3293 ieee80211_node_get_txrate_kbit(struct ieee80211_node *ni) 3294 { 3295 uint32_t kbps; 3296 3297 switch (ni->ni_txrate.type) { 3298 case IEEE80211_NODE_TXRATE_LEGACY: 3299 kbps = ni->ni_txrate.dot11rate * 500; 3300 break; 3301 case IEEE80211_NODE_TXRATE_HT: 3302 /* Note: Valid for MCS 0..76 */ 3303 { 3304 const struct ieee80211_mcs_rates *mcs = 3305 &ieee80211_htrates[ni->ni_txrate.dot11rate & 3306 ~IEEE80211_RATE_MCS]; 3307 3308 if (IEEE80211_IS_CHAN_HT40(ni->ni_chan)) { 3309 if (ni->ni_flags & IEEE80211_NODE_SGI40) 3310 kbps = mcs->ht40_rate_800ns * 500; 3311 else 3312 kbps = mcs->ht40_rate_400ns * 500; 3313 } else { 3314 if (ni->ni_flags & IEEE80211_NODE_SGI20) 3315 kbps = mcs->ht20_rate_800ns * 500; 3316 else 3317 kbps = mcs->ht20_rate_400ns * 500; 3318 } 3319 } 3320 break; 3321 case IEEE80211_NODE_TXRATE_VHT: 3322 /* Note: valid for VHT rates, assumes long-GI for now */ 3323 kbps = ieee80211_phy_vht_get_mcs_kbit(ni->ni_chw, 3324 ni->ni_txrate.nss, ni->ni_txrate.mcs, false); 3325 break; 3326 default: 3327 printf("%s: called for unknown rate (type %d)!\n", 3328 __func__, ni->ni_txrate.type); 3329 return (0); 3330 } 3331 3332 return (kbps); 3333 } 3334