1 /*- 2 * Copyright (c) 2001 Atsushi Onoe 3 * Copyright (c) 2002-2009 Sam Leffler, Errno Consulting 4 * All rights reserved. 5 * 6 * Redistribution and use in source and binary forms, with or without 7 * modification, are permitted provided that the following conditions 8 * are met: 9 * 1. Redistributions of source code must retain the above copyright 10 * notice, this list of conditions and the following disclaimer. 11 * 2. Redistributions in binary form must reproduce the above copyright 12 * notice, this list of conditions and the following disclaimer in the 13 * documentation and/or other materials provided with the distribution. 14 * 15 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR 16 * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES 17 * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. 18 * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, 19 * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT 20 * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, 21 * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY 22 * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT 23 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF 24 * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. 25 * 26 * $FreeBSD$ 27 */ 28 #ifndef _NET80211_IEEE80211_IOCTL_H_ 29 #define _NET80211_IEEE80211_IOCTL_H_ 30 31 /* 32 * IEEE 802.11 ioctls. 33 */ 34 #include <net80211/_ieee80211.h> 35 #include <net80211/ieee80211.h> 36 #include <net80211/ieee80211_crypto.h> 37 38 /* 39 * Per/node (station) statistics. 40 */ 41 struct ieee80211_nodestats { 42 uint32_t ns_rx_data; /* rx data frames */ 43 uint32_t ns_rx_mgmt; /* rx management frames */ 44 uint32_t ns_rx_ctrl; /* rx control frames */ 45 uint32_t ns_rx_ucast; /* rx unicast frames */ 46 uint32_t ns_rx_mcast; /* rx multi/broadcast frames */ 47 uint64_t ns_rx_bytes; /* rx data count (bytes) */ 48 uint64_t ns_rx_beacons; /* rx beacon frames */ 49 uint32_t ns_rx_proberesp; /* rx probe response frames */ 50 51 uint32_t ns_rx_dup; /* rx discard 'cuz dup */ 52 uint32_t ns_rx_noprivacy; /* rx w/ wep but privacy off */ 53 uint32_t ns_rx_wepfail; /* rx wep processing failed */ 54 uint32_t ns_rx_demicfail; /* rx demic failed */ 55 uint32_t ns_rx_decap; /* rx decapsulation failed */ 56 uint32_t ns_rx_defrag; /* rx defragmentation failed */ 57 uint32_t ns_rx_disassoc; /* rx disassociation */ 58 uint32_t ns_rx_deauth; /* rx deauthentication */ 59 uint32_t ns_rx_action; /* rx action */ 60 uint32_t ns_rx_decryptcrc; /* rx decrypt failed on crc */ 61 uint32_t ns_rx_unauth; /* rx on unauthorized port */ 62 uint32_t ns_rx_unencrypted; /* rx unecrypted w/ privacy */ 63 uint32_t ns_rx_drop; /* rx discard other reason */ 64 65 uint32_t ns_tx_data; /* tx data frames */ 66 uint32_t ns_tx_mgmt; /* tx management frames */ 67 uint32_t ns_tx_ctrl; /* tx control frames */ 68 uint32_t ns_tx_ucast; /* tx unicast frames */ 69 uint32_t ns_tx_mcast; /* tx multi/broadcast frames */ 70 uint64_t ns_tx_bytes; /* tx data count (bytes) */ 71 uint32_t ns_tx_probereq; /* tx probe request frames */ 72 73 uint32_t ns_tx_novlantag; /* tx discard 'cuz no tag */ 74 uint32_t ns_tx_vlanmismatch; /* tx discard 'cuz bad tag */ 75 76 uint32_t ns_ps_discard; /* ps discard 'cuz of age */ 77 78 /* MIB-related state */ 79 uint32_t ns_tx_assoc; /* [re]associations */ 80 uint32_t ns_tx_assoc_fail; /* [re]association failures */ 81 uint32_t ns_tx_auth; /* [re]authentications */ 82 uint32_t ns_tx_auth_fail; /* [re]authentication failures*/ 83 uint32_t ns_tx_deauth; /* deauthentications */ 84 uint32_t ns_tx_deauth_code; /* last deauth reason */ 85 uint32_t ns_tx_disassoc; /* disassociations */ 86 uint32_t ns_tx_disassoc_code; /* last disassociation reason */ 87 88 /* Hardware A-MSDU decode */ 89 uint32_t ns_rx_amsdu_more; /* RX decap A-MSDU, more coming from A-MSDU */ 90 uint32_t ns_rx_amsdu_more_end; /* RX decap A-MSDU (or any other frame), no more coming */ 91 uint32_t ns_spare[6]; 92 }; 93 94 /* 95 * Summary statistics. 96 */ 97 struct ieee80211_stats { 98 uint32_t is_rx_badversion; /* rx frame with bad version */ 99 uint32_t is_rx_tooshort; /* rx frame too short */ 100 uint32_t is_rx_wrongbss; /* rx from wrong bssid */ 101 uint32_t is_rx_dup; /* rx discard 'cuz dup */ 102 uint32_t is_rx_wrongdir; /* rx w/ wrong direction */ 103 uint32_t is_rx_mcastecho; /* rx discard 'cuz mcast echo */ 104 uint32_t is_rx_notassoc; /* rx discard 'cuz sta !assoc */ 105 uint32_t is_rx_noprivacy; /* rx w/ wep but privacy off */ 106 uint32_t is_rx_unencrypted; /* rx w/o wep and privacy on */ 107 uint32_t is_rx_wepfail; /* rx wep processing failed */ 108 uint32_t is_rx_decap; /* rx decapsulation failed */ 109 uint32_t is_rx_mgtdiscard; /* rx discard mgt frames */ 110 uint32_t is_rx_ctl; /* rx ctrl frames */ 111 uint32_t is_rx_beacon; /* rx beacon frames */ 112 uint32_t is_rx_rstoobig; /* rx rate set truncated */ 113 uint32_t is_rx_elem_missing; /* rx required element missing*/ 114 uint32_t is_rx_elem_toobig; /* rx element too big */ 115 uint32_t is_rx_elem_toosmall; /* rx element too small */ 116 uint32_t is_rx_elem_unknown; /* rx element unknown */ 117 uint32_t is_rx_badchan; /* rx frame w/ invalid chan */ 118 uint32_t is_rx_chanmismatch; /* rx frame chan mismatch */ 119 uint32_t is_rx_nodealloc; /* rx frame dropped */ 120 uint32_t is_rx_ssidmismatch; /* rx frame ssid mismatch */ 121 uint32_t is_rx_auth_unsupported; /* rx w/ unsupported auth alg */ 122 uint32_t is_rx_auth_fail; /* rx sta auth failure */ 123 uint32_t is_rx_auth_countermeasures;/* rx auth discard 'cuz CM */ 124 uint32_t is_rx_assoc_bss; /* rx assoc from wrong bssid */ 125 uint32_t is_rx_assoc_notauth; /* rx assoc w/o auth */ 126 uint32_t is_rx_assoc_capmismatch;/* rx assoc w/ cap mismatch */ 127 uint32_t is_rx_assoc_norate; /* rx assoc w/ no rate match */ 128 uint32_t is_rx_assoc_badwpaie; /* rx assoc w/ bad WPA IE */ 129 uint32_t is_rx_deauth; /* rx deauthentication */ 130 uint32_t is_rx_disassoc; /* rx disassociation */ 131 uint32_t is_rx_badsubtype; /* rx frame w/ unknown subtype*/ 132 uint32_t is_rx_nobuf; /* rx failed for lack of buf */ 133 uint32_t is_rx_decryptcrc; /* rx decrypt failed on crc */ 134 uint32_t is_rx_ahdemo_mgt; /* rx discard ahdemo mgt frame*/ 135 uint32_t is_rx_bad_auth; /* rx bad auth request */ 136 uint32_t is_rx_unauth; /* rx on unauthorized port */ 137 uint32_t is_rx_badkeyid; /* rx w/ incorrect keyid */ 138 uint32_t is_rx_ccmpreplay; /* rx seq# violation (CCMP) */ 139 uint32_t is_rx_ccmpformat; /* rx format bad (CCMP) */ 140 uint32_t is_rx_ccmpmic; /* rx MIC check failed (CCMP) */ 141 uint32_t is_rx_tkipreplay; /* rx seq# violation (TKIP) */ 142 uint32_t is_rx_tkipformat; /* rx format bad (TKIP) */ 143 uint32_t is_rx_tkipmic; /* rx MIC check failed (TKIP) */ 144 uint32_t is_rx_tkipicv; /* rx ICV check failed (TKIP) */ 145 uint32_t is_rx_badcipher; /* rx failed 'cuz key type */ 146 uint32_t is_rx_nocipherctx; /* rx failed 'cuz key !setup */ 147 uint32_t is_rx_acl; /* rx discard 'cuz acl policy */ 148 uint32_t is_tx_nobuf; /* tx failed for lack of buf */ 149 uint32_t is_tx_nonode; /* tx failed for no node */ 150 uint32_t is_tx_unknownmgt; /* tx of unknown mgt frame */ 151 uint32_t is_tx_badcipher; /* tx failed 'cuz key type */ 152 uint32_t is_tx_nodefkey; /* tx failed 'cuz no defkey */ 153 uint32_t is_tx_noheadroom; /* tx failed 'cuz no space */ 154 uint32_t is_tx_fragframes; /* tx frames fragmented */ 155 uint32_t is_tx_frags; /* tx fragments created */ 156 uint32_t is_scan_active; /* active scans started */ 157 uint32_t is_scan_passive; /* passive scans started */ 158 uint32_t is_node_timeout; /* nodes timed out inactivity */ 159 uint32_t is_crypto_nomem; /* no memory for crypto ctx */ 160 uint32_t is_crypto_tkip; /* tkip crypto done in s/w */ 161 uint32_t is_crypto_tkipenmic; /* tkip en-MIC done in s/w */ 162 uint32_t is_crypto_tkipdemic; /* tkip de-MIC done in s/w */ 163 uint32_t is_crypto_tkipcm; /* tkip counter measures */ 164 uint32_t is_crypto_ccmp; /* ccmp crypto done in s/w */ 165 uint32_t is_crypto_wep; /* wep crypto done in s/w */ 166 uint32_t is_crypto_setkey_cipher;/* cipher rejected key */ 167 uint32_t is_crypto_setkey_nokey; /* no key index for setkey */ 168 uint32_t is_crypto_delkey; /* driver key delete failed */ 169 uint32_t is_crypto_badcipher; /* unknown cipher */ 170 uint32_t is_crypto_nocipher; /* cipher not available */ 171 uint32_t is_crypto_attachfail; /* cipher attach failed */ 172 uint32_t is_crypto_swfallback; /* cipher fallback to s/w */ 173 uint32_t is_crypto_keyfail; /* driver key alloc failed */ 174 uint32_t is_crypto_enmicfail; /* en-MIC failed */ 175 uint32_t is_ibss_capmismatch; /* merge failed-cap mismatch */ 176 uint32_t is_ibss_norate; /* merge failed-rate mismatch */ 177 uint32_t is_ps_unassoc; /* ps-poll for unassoc. sta */ 178 uint32_t is_ps_badaid; /* ps-poll w/ incorrect aid */ 179 uint32_t is_ps_qempty; /* ps-poll w/ nothing to send */ 180 uint32_t is_ff_badhdr; /* fast frame rx'd w/ bad hdr */ 181 uint32_t is_ff_tooshort; /* fast frame rx decap error */ 182 uint32_t is_ff_split; /* fast frame rx split error */ 183 uint32_t is_ff_decap; /* fast frames decap'd */ 184 uint32_t is_ff_encap; /* fast frames encap'd for tx */ 185 uint32_t is_rx_badbintval; /* rx frame w/ bogus bintval */ 186 uint32_t is_rx_demicfail; /* rx demic failed */ 187 uint32_t is_rx_defrag; /* rx defragmentation failed */ 188 uint32_t is_rx_mgmt; /* rx management frames */ 189 uint32_t is_rx_action; /* rx action mgt frames */ 190 uint32_t is_amsdu_tooshort; /* A-MSDU rx decap error */ 191 uint32_t is_amsdu_split; /* A-MSDU rx split error */ 192 uint32_t is_amsdu_decap; /* A-MSDU decap'd */ 193 uint32_t is_amsdu_encap; /* A-MSDU encap'd for tx */ 194 uint32_t is_ampdu_bar_bad; /* A-MPDU BAR out of window */ 195 uint32_t is_ampdu_bar_oow; /* A-MPDU BAR before ADDBA */ 196 uint32_t is_ampdu_bar_move; /* A-MPDU BAR moved window */ 197 uint32_t is_ampdu_bar_rx; /* A-MPDU BAR frames handled */ 198 uint32_t is_ampdu_rx_flush; /* A-MPDU frames flushed */ 199 uint32_t is_ampdu_rx_oor; /* A-MPDU frames out-of-order */ 200 uint32_t is_ampdu_rx_copy; /* A-MPDU frames copied down */ 201 uint32_t is_ampdu_rx_drop; /* A-MPDU frames dropped */ 202 uint32_t is_tx_badstate; /* tx discard state != RUN */ 203 uint32_t is_tx_notassoc; /* tx failed, sta not assoc */ 204 uint32_t is_tx_classify; /* tx classification failed */ 205 uint32_t is_dwds_mcast; /* discard mcast over dwds */ 206 uint32_t is_dwds_qdrop; /* dwds pending frame q full */ 207 uint32_t is_ht_assoc_nohtcap; /* non-HT sta rejected */ 208 uint32_t is_ht_assoc_downgrade; /* HT sta forced to legacy */ 209 uint32_t is_ht_assoc_norate; /* HT assoc w/ rate mismatch */ 210 uint32_t is_ampdu_rx_age; /* A-MPDU sent up 'cuz of age */ 211 uint32_t is_ampdu_rx_move; /* A-MPDU MSDU moved window */ 212 uint32_t is_addba_reject; /* ADDBA reject 'cuz disabled */ 213 uint32_t is_addba_norequest; /* ADDBA response w/o ADDBA */ 214 uint32_t is_addba_badtoken; /* ADDBA response w/ wrong 215 dialogtoken */ 216 uint32_t is_addba_badpolicy; /* ADDBA resp w/ wrong policy */ 217 uint32_t is_ampdu_stop; /* A-MPDU stream stopped */ 218 uint32_t is_ampdu_stop_failed; /* A-MPDU stream not running */ 219 uint32_t is_ampdu_rx_reorder; /* A-MPDU held for rx reorder */ 220 uint32_t is_scan_bg; /* background scans started */ 221 uint8_t is_rx_deauth_code; /* last rx'd deauth reason */ 222 uint8_t is_rx_disassoc_code; /* last rx'd disassoc reason */ 223 uint8_t is_rx_authfail_code; /* last rx'd auth fail reason */ 224 uint32_t is_beacon_miss; /* beacon miss notification */ 225 uint32_t is_rx_badstate; /* rx discard state != RUN */ 226 uint32_t is_ff_flush; /* ff's flush'd from stageq */ 227 uint32_t is_tx_ctl; /* tx ctrl frames */ 228 uint32_t is_ampdu_rexmt; /* A-MPDU frames rexmt ok */ 229 uint32_t is_ampdu_rexmt_fail; /* A-MPDU frames rexmt fail */ 230 231 uint32_t is_mesh_wrongmesh; /* dropped 'cuz not mesh sta*/ 232 uint32_t is_mesh_nolink; /* dropped 'cuz link not estab*/ 233 uint32_t is_mesh_fwd_ttl; /* mesh not fwd'd 'cuz ttl 0 */ 234 uint32_t is_mesh_fwd_nobuf; /* mesh not fwd'd 'cuz no mbuf*/ 235 uint32_t is_mesh_fwd_tooshort; /* mesh not fwd'd 'cuz no hdr */ 236 uint32_t is_mesh_fwd_disabled; /* mesh not fwd'd 'cuz disabled */ 237 uint32_t is_mesh_fwd_nopath; /* mesh not fwd'd 'cuz path unknown */ 238 239 uint32_t is_hwmp_wrongseq; /* wrong hwmp seq no. */ 240 uint32_t is_hwmp_rootreqs; /* root PREQs sent */ 241 uint32_t is_hwmp_rootrann; /* root RANNs sent */ 242 243 uint32_t is_mesh_badae; /* dropped 'cuz invalid AE */ 244 uint32_t is_mesh_rtaddfailed; /* route add failed */ 245 uint32_t is_mesh_notproxy; /* dropped 'cuz not proxying */ 246 uint32_t is_rx_badalign; /* dropped 'cuz misaligned */ 247 uint32_t is_hwmp_proxy; /* PREP for proxy route */ 248 uint32_t is_beacon_bad; /* Number of bad beacons */ 249 uint32_t is_ampdu_bar_tx; /* A-MPDU BAR frames TXed */ 250 uint32_t is_ampdu_bar_tx_retry; /* A-MPDU BAR frames TX rtry */ 251 uint32_t is_ampdu_bar_tx_fail; /* A-MPDU BAR frames TX fail */ 252 253 uint32_t is_ff_encapfail; /* failed FF encap */ 254 uint32_t is_amsdu_encapfail; /* failed A-MSDU encap */ 255 256 uint32_t is_spare[5]; 257 }; 258 259 /* 260 * Max size of optional information elements. We artificially 261 * constrain this; it's limited only by the max frame size (and 262 * the max parameter size of the wireless extensions). 263 */ 264 #define IEEE80211_MAX_OPT_IE 256 265 266 /* 267 * WPA/RSN get/set key request. Specify the key/cipher 268 * type and whether the key is to be used for sending and/or 269 * receiving. The key index should be set only when working 270 * with global keys (use IEEE80211_KEYIX_NONE for ``no index''). 271 * Otherwise a unicast/pairwise key is specified by the bssid 272 * (on a station) or mac address (on an ap). They key length 273 * must include any MIC key data; otherwise it should be no 274 * more than IEEE80211_KEYBUF_SIZE. 275 */ 276 struct ieee80211req_key { 277 uint8_t ik_type; /* key/cipher type */ 278 uint8_t ik_pad; 279 uint16_t ik_keyix; /* key index */ 280 uint8_t ik_keylen; /* key length in bytes */ 281 uint8_t ik_flags; 282 /* NB: IEEE80211_KEY_XMIT and IEEE80211_KEY_RECV defined elsewhere */ 283 #define IEEE80211_KEY_DEFAULT 0x80 /* default xmit key */ 284 uint8_t ik_macaddr[IEEE80211_ADDR_LEN]; 285 uint64_t ik_keyrsc; /* key receive sequence counter */ 286 uint64_t ik_keytsc; /* key transmit sequence counter */ 287 uint8_t ik_keydata[IEEE80211_KEYBUF_SIZE+IEEE80211_MICBUF_SIZE]; 288 }; 289 290 /* 291 * Delete a key either by index or address. Set the index 292 * to IEEE80211_KEYIX_NONE when deleting a unicast key. 293 */ 294 struct ieee80211req_del_key { 295 uint8_t idk_keyix; /* key index */ 296 uint8_t idk_macaddr[IEEE80211_ADDR_LEN]; 297 }; 298 299 /* 300 * MLME state manipulation request. IEEE80211_MLME_ASSOC 301 * only makes sense when operating as a station. The other 302 * requests can be used when operating as a station or an 303 * ap (to effect a station). 304 */ 305 struct ieee80211req_mlme { 306 uint8_t im_op; /* operation to perform */ 307 #define IEEE80211_MLME_ASSOC 1 /* associate station */ 308 #define IEEE80211_MLME_DISASSOC 2 /* disassociate station */ 309 #define IEEE80211_MLME_DEAUTH 3 /* deauthenticate station */ 310 #define IEEE80211_MLME_AUTHORIZE 4 /* authorize station */ 311 #define IEEE80211_MLME_UNAUTHORIZE 5 /* unauthorize station */ 312 #define IEEE80211_MLME_AUTH 6 /* authenticate station */ 313 uint8_t im_ssid_len; /* length of optional ssid */ 314 uint16_t im_reason; /* 802.11 reason code */ 315 uint8_t im_macaddr[IEEE80211_ADDR_LEN]; 316 uint8_t im_ssid[IEEE80211_NWID_LEN]; 317 }; 318 319 /* 320 * MAC ACL operations. 321 */ 322 enum { 323 IEEE80211_MACCMD_POLICY_OPEN = 0, /* set policy: no ACL's */ 324 IEEE80211_MACCMD_POLICY_ALLOW = 1, /* set policy: allow traffic */ 325 IEEE80211_MACCMD_POLICY_DENY = 2, /* set policy: deny traffic */ 326 IEEE80211_MACCMD_FLUSH = 3, /* flush ACL database */ 327 IEEE80211_MACCMD_DETACH = 4, /* detach ACL policy */ 328 IEEE80211_MACCMD_POLICY = 5, /* get ACL policy */ 329 IEEE80211_MACCMD_LIST = 6, /* get ACL database */ 330 IEEE80211_MACCMD_POLICY_RADIUS = 7, /* set policy: RADIUS managed */ 331 }; 332 333 struct ieee80211req_maclist { 334 uint8_t ml_macaddr[IEEE80211_ADDR_LEN]; 335 } __packed; 336 337 /* 338 * Mesh Routing Table Operations. 339 */ 340 enum { 341 IEEE80211_MESH_RTCMD_LIST = 0, /* list HWMP routing table */ 342 IEEE80211_MESH_RTCMD_FLUSH = 1, /* flush HWMP routing table */ 343 IEEE80211_MESH_RTCMD_ADD = 2, /* add entry to the table */ 344 IEEE80211_MESH_RTCMD_DELETE = 3, /* delete an entry from the table */ 345 }; 346 347 struct ieee80211req_mesh_route { 348 uint8_t imr_flags; 349 #define IEEE80211_MESHRT_FLAGS_DISCOVER 0x01 350 #define IEEE80211_MESHRT_FLAGS_VALID 0x02 351 #define IEEE80211_MESHRT_FLAGS_PROXY 0x04 352 #define IEEE80211_MESHRT_FLAGS_GATE 0x08 353 uint8_t imr_dest[IEEE80211_ADDR_LEN]; 354 uint8_t imr_nexthop[IEEE80211_ADDR_LEN]; 355 uint16_t imr_nhops; 356 uint8_t imr_pad; 357 uint32_t imr_metric; 358 uint32_t imr_lifetime; 359 uint32_t imr_lastmseq; 360 }; 361 362 /* 363 * HWMP root modes 364 */ 365 enum { 366 IEEE80211_HWMP_ROOTMODE_DISABLED = 0, /* disabled */ 367 IEEE80211_HWMP_ROOTMODE_NORMAL = 1, /* normal PREPs */ 368 IEEE80211_HWMP_ROOTMODE_PROACTIVE = 2, /* proactive PREPS */ 369 IEEE80211_HWMP_ROOTMODE_RANN = 3, /* use RANN elemid */ 370 }; 371 372 373 /* 374 * Set the active channel list by IEEE channel #: each channel 375 * to be marked active is set in a bit vector. Note this list is 376 * intersected with the available channel list in calculating 377 * the set of channels actually used in scanning. 378 */ 379 struct ieee80211req_chanlist { 380 uint8_t ic_channels[32]; /* NB: can be variable length */ 381 }; 382 383 /* 384 * Get the active channel list info. 385 */ 386 struct ieee80211req_chaninfo { 387 u_int ic_nchans; 388 struct ieee80211_channel ic_chans[1]; /* NB: variable length */ 389 }; 390 #define IEEE80211_CHANINFO_SIZE(_nchan) \ 391 (sizeof(struct ieee80211req_chaninfo) + \ 392 (((_nchan)-1) * sizeof(struct ieee80211_channel))) 393 #define IEEE80211_CHANINFO_SPACE(_ci) \ 394 IEEE80211_CHANINFO_SIZE((_ci)->ic_nchans) 395 396 /* 397 * Retrieve the WPA/RSN information element for an associated station. 398 */ 399 struct ieee80211req_wpaie { /* old version w/ only one ie */ 400 uint8_t wpa_macaddr[IEEE80211_ADDR_LEN]; 401 uint8_t wpa_ie[IEEE80211_MAX_OPT_IE]; 402 }; 403 struct ieee80211req_wpaie2 { 404 uint8_t wpa_macaddr[IEEE80211_ADDR_LEN]; 405 uint8_t wpa_ie[IEEE80211_MAX_OPT_IE]; 406 uint8_t rsn_ie[IEEE80211_MAX_OPT_IE]; 407 }; 408 409 /* 410 * Retrieve per-node statistics. 411 */ 412 struct ieee80211req_sta_stats { 413 union { 414 /* NB: explicitly force 64-bit alignment */ 415 uint8_t macaddr[IEEE80211_ADDR_LEN]; 416 uint64_t pad; 417 } is_u; 418 struct ieee80211_nodestats is_stats; 419 }; 420 421 /* 422 * Station information block; the mac address is used 423 * to retrieve other data like stats, unicast key, etc. 424 */ 425 struct ieee80211req_sta_info { 426 uint16_t isi_len; /* total length (mult of 4) */ 427 uint16_t isi_ie_off; /* offset to IE data */ 428 uint16_t isi_ie_len; /* IE length */ 429 uint16_t isi_freq; /* MHz */ 430 uint32_t isi_flags; /* channel flags */ 431 uint32_t isi_state; /* state flags */ 432 uint8_t isi_authmode; /* authentication algorithm */ 433 int8_t isi_rssi; /* receive signal strength */ 434 int8_t isi_noise; /* noise floor */ 435 uint8_t isi_capinfo; /* capabilities */ 436 uint8_t isi_erp; /* ERP element */ 437 uint8_t isi_macaddr[IEEE80211_ADDR_LEN]; 438 uint8_t isi_nrates; 439 /* negotiated rates */ 440 uint8_t isi_rates[IEEE80211_RATE_MAXSIZE]; 441 uint8_t isi_txrate; /* legacy/IEEE rate or MCS */ 442 uint16_t isi_associd; /* assoc response */ 443 uint16_t isi_txpower; /* current tx power */ 444 uint16_t isi_vlan; /* vlan tag */ 445 /* NB: [IEEE80211_NONQOS_TID] holds seq#'s for non-QoS stations */ 446 uint16_t isi_txseqs[IEEE80211_TID_SIZE];/* tx seq #/TID */ 447 uint16_t isi_rxseqs[IEEE80211_TID_SIZE];/* rx seq#/TID */ 448 uint16_t isi_inact; /* inactivity timer */ 449 uint16_t isi_txmbps; /* current tx rate in .5 Mb/s */ 450 uint16_t isi_pad; 451 uint32_t isi_jointime; /* time of assoc/join */ 452 struct ieee80211_mimo_info isi_mimo; /* MIMO info for 11n sta's */ 453 /* 11s info */ 454 uint16_t isi_peerid; 455 uint16_t isi_localid; 456 uint8_t isi_peerstate; 457 /* XXX frag state? */ 458 /* variable length IE data */ 459 }; 460 461 /* 462 * Retrieve per-station information; to retrieve all 463 * specify a mac address of ff:ff:ff:ff:ff:ff. 464 */ 465 struct ieee80211req_sta_req { 466 union { 467 /* NB: explicitly force 64-bit alignment */ 468 uint8_t macaddr[IEEE80211_ADDR_LEN]; 469 uint64_t pad; 470 } is_u; 471 struct ieee80211req_sta_info info[1]; /* variable length */ 472 }; 473 474 /* 475 * Get/set per-station tx power cap. 476 */ 477 struct ieee80211req_sta_txpow { 478 uint8_t it_macaddr[IEEE80211_ADDR_LEN]; 479 uint8_t it_txpow; 480 }; 481 482 /* 483 * WME parameters manipulated with IEEE80211_IOC_WME_CWMIN 484 * through IEEE80211_IOC_WME_ACKPOLICY are set and return 485 * using i_val and i_len. i_val holds the value itself. 486 * i_len specifies the AC and, as appropriate, then high bit 487 * specifies whether the operation is to be applied to the 488 * BSS or ourself. 489 */ 490 #define IEEE80211_WMEPARAM_SELF 0x0000 /* parameter applies to self */ 491 #define IEEE80211_WMEPARAM_BSS 0x8000 /* parameter applies to BSS */ 492 #define IEEE80211_WMEPARAM_VAL 0x7fff /* parameter value */ 493 494 /* 495 * Application Information Elements can be appended to a variety 496 * of frames with the IEE80211_IOC_APPIE request. This request 497 * piggybacks on a normal ieee80211req; the frame type is passed 498 * in i_val as the 802.11 FC0 bytes and the length of the IE data 499 * is passed in i_len. The data is referenced in i_data. If i_len 500 * is zero then any previously configured IE data is removed. At 501 * most IEEE80211_MAX_APPIE data be appened. Note that multiple 502 * IE's can be supplied; the data is treated opaquely. 503 */ 504 #define IEEE80211_MAX_APPIE 1024 /* max app IE data */ 505 /* 506 * Hack: the WPA authenticator uses this mechanism to specify WPA 507 * ie's that are used instead of the ones normally constructed using 508 * the cipher state setup with separate ioctls. This avoids issues 509 * like the authenticator ordering ie data differently than the 510 * net80211 layer and needing to keep separate state for WPA and RSN. 511 */ 512 #define IEEE80211_APPIE_WPA \ 513 (IEEE80211_FC0_TYPE_MGT | IEEE80211_FC0_SUBTYPE_BEACON | \ 514 IEEE80211_FC0_SUBTYPE_PROBE_RESP) 515 516 /* 517 * Station mode roaming parameters. These are maintained 518 * per band/mode and control the roaming algorithm. 519 */ 520 struct ieee80211_roamparams_req { 521 struct ieee80211_roamparam params[IEEE80211_MODE_MAX]; 522 }; 523 524 /* 525 * Transmit parameters. These can be used to set fixed transmit 526 * rate for each operating mode when operating as client or on a 527 * per-client basis according to the capabilities of the client 528 * (e.g. an 11b client associated to an 11g ap) when operating as 529 * an ap. 530 * 531 * MCS are distinguished from legacy rates by or'ing in 0x80. 532 */ 533 struct ieee80211_txparams_req { 534 struct ieee80211_txparam params[IEEE80211_MODE_MAX]; 535 }; 536 537 /* 538 * Set regulatory domain state with IEEE80211_IOC_REGDOMAIN. 539 * Note this is both the regulatory description and the channel 540 * list. The get request for IEEE80211_IOC_REGDOMAIN returns 541 * only the regdomain info; the channel list is obtained 542 * separately with IEEE80211_IOC_CHANINFO. 543 */ 544 struct ieee80211_regdomain_req { 545 struct ieee80211_regdomain rd; 546 struct ieee80211req_chaninfo chaninfo; 547 }; 548 #define IEEE80211_REGDOMAIN_SIZE(_nchan) \ 549 (sizeof(struct ieee80211_regdomain_req) + \ 550 (((_nchan)-1) * sizeof(struct ieee80211_channel))) 551 #define IEEE80211_REGDOMAIN_SPACE(_req) \ 552 IEEE80211_REGDOMAIN_SIZE((_req)->chaninfo.ic_nchans) 553 554 /* 555 * Get driver capabilities. Driver, hardware crypto, and 556 * HT/802.11n capabilities, and a table that describes what 557 * the radio can do. 558 */ 559 struct ieee80211_devcaps_req { 560 uint32_t dc_drivercaps; /* general driver caps */ 561 uint32_t dc_cryptocaps; /* hardware crypto support */ 562 uint32_t dc_htcaps; /* HT/802.11n support */ 563 uint32_t dc_vhtcaps; /* VHT/802.11ac capabilities */ 564 struct ieee80211req_chaninfo dc_chaninfo; 565 }; 566 #define IEEE80211_DEVCAPS_SIZE(_nchan) \ 567 (sizeof(struct ieee80211_devcaps_req) + \ 568 (((_nchan)-1) * sizeof(struct ieee80211_channel))) 569 #define IEEE80211_DEVCAPS_SPACE(_dc) \ 570 IEEE80211_DEVCAPS_SIZE((_dc)->dc_chaninfo.ic_nchans) 571 572 struct ieee80211_chanswitch_req { 573 struct ieee80211_channel csa_chan; /* new channel */ 574 int csa_mode; /* CSA mode */ 575 int csa_count; /* beacon count to switch */ 576 }; 577 578 /* 579 * Get/set per-station vlan tag. 580 */ 581 struct ieee80211req_sta_vlan { 582 uint8_t sv_macaddr[IEEE80211_ADDR_LEN]; 583 uint16_t sv_vlan; 584 }; 585 586 #ifdef __FreeBSD__ 587 /* 588 * FreeBSD-style ioctls. 589 */ 590 /* the first member must be matched with struct ifreq */ 591 struct ieee80211req { 592 char i_name[IFNAMSIZ]; /* if_name, e.g. "wi0" */ 593 uint16_t i_type; /* req type */ 594 int16_t i_val; /* Index or simple value */ 595 uint16_t i_len; /* Index or simple value */ 596 void *i_data; /* Extra data */ 597 }; 598 #define SIOCS80211 _IOW('i', 234, struct ieee80211req) 599 #define SIOCG80211 _IOWR('i', 235, struct ieee80211req) 600 #define SIOCG80211STATS _IOWR('i', 236, struct ifreq) 601 602 #define IEEE80211_IOC_SSID 1 603 #define IEEE80211_IOC_NUMSSIDS 2 604 #define IEEE80211_IOC_WEP 3 605 #define IEEE80211_WEP_NOSUP -1 606 #define IEEE80211_WEP_OFF 0 607 #define IEEE80211_WEP_ON 1 608 #define IEEE80211_WEP_MIXED 2 609 #define IEEE80211_IOC_WEPKEY 4 610 #define IEEE80211_IOC_NUMWEPKEYS 5 611 #define IEEE80211_IOC_WEPTXKEY 6 612 #define IEEE80211_IOC_AUTHMODE 7 613 #define IEEE80211_IOC_STATIONNAME 8 614 #define IEEE80211_IOC_CHANNEL 9 615 #define IEEE80211_IOC_POWERSAVE 10 616 #define IEEE80211_POWERSAVE_NOSUP -1 617 #define IEEE80211_POWERSAVE_OFF 0 618 #define IEEE80211_POWERSAVE_CAM 1 619 #define IEEE80211_POWERSAVE_PSP 2 620 #define IEEE80211_POWERSAVE_PSP_CAM 3 621 #define IEEE80211_POWERSAVE_ON IEEE80211_POWERSAVE_CAM 622 #define IEEE80211_IOC_POWERSAVESLEEP 11 623 #define IEEE80211_IOC_RTSTHRESHOLD 12 624 #define IEEE80211_IOC_PROTMODE 13 625 #define IEEE80211_PROTMODE_OFF 0 626 #define IEEE80211_PROTMODE_CTS 1 627 #define IEEE80211_PROTMODE_RTSCTS 2 628 #define IEEE80211_IOC_TXPOWER 14 /* global tx power limit */ 629 #define IEEE80211_IOC_BSSID 15 630 #define IEEE80211_IOC_ROAMING 16 /* roaming mode */ 631 #define IEEE80211_IOC_PRIVACY 17 /* privacy invoked */ 632 #define IEEE80211_IOC_DROPUNENCRYPTED 18 /* discard unencrypted frames */ 633 #define IEEE80211_IOC_WPAKEY 19 634 #define IEEE80211_IOC_DELKEY 20 635 #define IEEE80211_IOC_MLME 21 636 /* 22 was IEEE80211_IOC_OPTIE, replaced by IEEE80211_IOC_APPIE */ 637 /* 23 was IEEE80211_IOC_SCAN_REQ */ 638 /* 24 was IEEE80211_IOC_SCAN_RESULTS */ 639 #define IEEE80211_IOC_COUNTERMEASURES 25 /* WPA/TKIP countermeasures */ 640 #define IEEE80211_IOC_WPA 26 /* WPA mode (0,1,2) */ 641 #define IEEE80211_IOC_CHANLIST 27 /* channel list */ 642 #define IEEE80211_IOC_WME 28 /* WME mode (on, off) */ 643 #define IEEE80211_IOC_HIDESSID 29 /* hide SSID mode (on, off) */ 644 #define IEEE80211_IOC_APBRIDGE 30 /* AP inter-sta bridging */ 645 /* 31-35,37-38 were for WPA authenticator settings */ 646 /* 36 was IEEE80211_IOC_DRIVER_CAPS */ 647 #define IEEE80211_IOC_WPAIE 39 /* WPA information element */ 648 #define IEEE80211_IOC_STA_STATS 40 /* per-station statistics */ 649 #define IEEE80211_IOC_MACCMD 41 /* MAC ACL operation */ 650 #define IEEE80211_IOC_CHANINFO 42 /* channel info list */ 651 #define IEEE80211_IOC_TXPOWMAX 43 /* max tx power for channel */ 652 #define IEEE80211_IOC_STA_TXPOW 44 /* per-station tx power limit */ 653 /* 45 was IEEE80211_IOC_STA_INFO */ 654 #define IEEE80211_IOC_WME_CWMIN 46 /* WME: ECWmin */ 655 #define IEEE80211_IOC_WME_CWMAX 47 /* WME: ECWmax */ 656 #define IEEE80211_IOC_WME_AIFS 48 /* WME: AIFSN */ 657 #define IEEE80211_IOC_WME_TXOPLIMIT 49 /* WME: txops limit */ 658 #define IEEE80211_IOC_WME_ACM 50 /* WME: ACM (bss only) */ 659 #define IEEE80211_IOC_WME_ACKPOLICY 51 /* WME: ACK policy (!bss only)*/ 660 #define IEEE80211_IOC_DTIM_PERIOD 52 /* DTIM period (beacons) */ 661 #define IEEE80211_IOC_BEACON_INTERVAL 53 /* beacon interval (ms) */ 662 #define IEEE80211_IOC_ADDMAC 54 /* add sta to MAC ACL table */ 663 #define IEEE80211_IOC_DELMAC 55 /* del sta from MAC ACL table */ 664 #define IEEE80211_IOC_PUREG 56 /* pure 11g (no 11b stations) */ 665 #define IEEE80211_IOC_FF 57 /* ATH fast frames (on, off) */ 666 #define IEEE80211_IOC_TURBOP 58 /* ATH turbo' (on, off) */ 667 #define IEEE80211_IOC_BGSCAN 59 /* bg scanning (on, off) */ 668 #define IEEE80211_IOC_BGSCAN_IDLE 60 /* bg scan idle threshold */ 669 #define IEEE80211_IOC_BGSCAN_INTERVAL 61 /* bg scan interval */ 670 #define IEEE80211_IOC_SCANVALID 65 /* scan cache valid threshold */ 671 /* 66-72 were IEEE80211_IOC_ROAM_* and IEEE80211_IOC_MCAST_RATE */ 672 #define IEEE80211_IOC_FRAGTHRESHOLD 73 /* tx fragmentation threshold */ 673 #define IEEE80211_IOC_BURST 75 /* packet bursting */ 674 #define IEEE80211_IOC_SCAN_RESULTS 76 /* get scan results */ 675 #define IEEE80211_IOC_BMISSTHRESHOLD 77 /* beacon miss threshold */ 676 #define IEEE80211_IOC_STA_INFO 78 /* station/neighbor info */ 677 #define IEEE80211_IOC_WPAIE2 79 /* WPA+RSN info elements */ 678 #define IEEE80211_IOC_CURCHAN 80 /* current channel */ 679 #define IEEE80211_IOC_SHORTGI 81 /* 802.11n half GI */ 680 #define IEEE80211_IOC_AMPDU 82 /* 802.11n A-MPDU (on, off) */ 681 #define IEEE80211_IOC_AMPDU_LIMIT 83 /* A-MPDU length limit */ 682 #define IEEE80211_IOC_AMPDU_DENSITY 84 /* A-MPDU density */ 683 #define IEEE80211_IOC_AMSDU 85 /* 802.11n A-MSDU (on, off) */ 684 #define IEEE80211_IOC_AMSDU_LIMIT 86 /* A-MSDU length limit */ 685 #define IEEE80211_IOC_PUREN 87 /* pure 11n (no legacy sta's) */ 686 #define IEEE80211_IOC_DOTH 88 /* 802.11h (on, off) */ 687 /* 89-91 were regulatory items */ 688 #define IEEE80211_IOC_HTCOMPAT 92 /* support pre-D1.10 HT ie's */ 689 #define IEEE80211_IOC_DWDS 93 /* DWDS/4-address handling */ 690 #define IEEE80211_IOC_INACTIVITY 94 /* sta inactivity handling */ 691 #define IEEE80211_IOC_APPIE 95 /* application IE's */ 692 #define IEEE80211_IOC_WPS 96 /* WPS operation */ 693 #define IEEE80211_IOC_TSN 97 /* TSN operation */ 694 #define IEEE80211_IOC_DEVCAPS 98 /* driver+device capabilities */ 695 #define IEEE80211_IOC_CHANSWITCH 99 /* start 11h channel switch */ 696 #define IEEE80211_IOC_DFS 100 /* DFS (on, off) */ 697 #define IEEE80211_IOC_DOTD 101 /* 802.11d (on, off) */ 698 #define IEEE80211_IOC_HTPROTMODE 102 /* HT protection (off, rts) */ 699 #define IEEE80211_IOC_SCAN_REQ 103 /* scan w/ specified params */ 700 #define IEEE80211_IOC_SCAN_CANCEL 104 /* cancel ongoing scan */ 701 #define IEEE80211_IOC_HTCONF 105 /* HT config (off, HT20, HT40)*/ 702 #define IEEE80211_IOC_REGDOMAIN 106 /* regulatory domain info */ 703 #define IEEE80211_IOC_ROAM 107 /* roaming params en masse */ 704 #define IEEE80211_IOC_TXPARAMS 108 /* tx parameters */ 705 #define IEEE80211_IOC_STA_VLAN 109 /* per-station vlan tag */ 706 #define IEEE80211_IOC_SMPS 110 /* MIMO power save */ 707 #define IEEE80211_IOC_RIFS 111 /* RIFS config (on, off) */ 708 #define IEEE80211_IOC_GREENFIELD 112 /* Greenfield (on, off) */ 709 #define IEEE80211_IOC_STBC 113 /* STBC Tx/RX (on, off) */ 710 #define IEEE80211_IOC_LDPC 114 /* LDPC Tx/RX (on, off) */ 711 712 /* VHT */ 713 #define IEEE80211_IOC_VHTCONF 130 /* VHT config (off, on; widths) */ 714 715 #define IEEE80211_IOC_MESH_ID 170 /* mesh identifier */ 716 #define IEEE80211_IOC_MESH_AP 171 /* accepting peerings */ 717 #define IEEE80211_IOC_MESH_FWRD 172 /* forward frames */ 718 #define IEEE80211_IOC_MESH_PROTO 173 /* mesh protocols */ 719 #define IEEE80211_IOC_MESH_TTL 174 /* mesh TTL */ 720 #define IEEE80211_IOC_MESH_RTCMD 175 /* mesh routing table commands*/ 721 #define IEEE80211_IOC_MESH_PR_METRIC 176 /* mesh metric protocol */ 722 #define IEEE80211_IOC_MESH_PR_PATH 177 /* mesh path protocol */ 723 #define IEEE80211_IOC_MESH_PR_SIG 178 /* mesh sig protocol */ 724 #define IEEE80211_IOC_MESH_PR_CC 179 /* mesh congestion protocol */ 725 #define IEEE80211_IOC_MESH_PR_AUTH 180 /* mesh auth protocol */ 726 #define IEEE80211_IOC_MESH_GATE 181 /* mesh gate XXX: 173? */ 727 728 #define IEEE80211_IOC_HWMP_ROOTMODE 190 /* HWMP root mode */ 729 #define IEEE80211_IOC_HWMP_MAXHOPS 191 /* number of hops before drop */ 730 #define IEEE80211_IOC_HWMP_TTL 192 /* HWMP TTL */ 731 732 #define IEEE80211_IOC_TDMA_SLOT 201 /* TDMA: assigned slot */ 733 #define IEEE80211_IOC_TDMA_SLOTCNT 202 /* TDMA: slots in bss */ 734 #define IEEE80211_IOC_TDMA_SLOTLEN 203 /* TDMA: slot length (usecs) */ 735 #define IEEE80211_IOC_TDMA_BINTERVAL 204 /* TDMA: beacon intvl (slots) */ 736 737 #define IEEE80211_IOC_QUIET 205 /* Quiet Enable/Disable */ 738 #define IEEE80211_IOC_QUIET_PERIOD 206 /* Quiet Period */ 739 #define IEEE80211_IOC_QUIET_OFFSET 207 /* Quiet Offset */ 740 #define IEEE80211_IOC_QUIET_DUR 208 /* Quiet Duration */ 741 #define IEEE80211_IOC_QUIET_COUNT 209 /* Quiet Count */ 742 /* 743 * Parameters for controlling a scan requested with 744 * IEEE80211_IOC_SCAN_REQ. 745 * 746 * Active scans cause ProbeRequest frames to be issued for each 747 * specified ssid and, by default, a broadcast ProbeRequest frame. 748 * The set of ssid's is specified in the request. 749 * 750 * By default the scan will cause a BSS to be joined (in station/adhoc 751 * mode) or a channel to be selected for operation (hostap mode). 752 * To disable that specify IEEE80211_IOC_SCAN_NOPICK and if the 753 * 754 * If the station is currently associated to an AP then a scan request 755 * will cause the station to leave the current channel and potentially 756 * miss frames from the AP. Alternatively the station may notify the 757 * AP that it is going into power save mode before it leaves the channel. 758 * This ensures frames for the station are buffered by the AP. This is 759 * termed a ``bg scan'' and is requested with the IEEE80211_IOC_SCAN_BGSCAN 760 * flag. Background scans may take longer than foreground scans and may 761 * be preempted by traffic. If a station is not associated to an AP 762 * then a request for a background scan is automatically done in the 763 * foreground. 764 * 765 * The results of the scan request are cached by the system. This 766 * information is aged out and/or invalidated based on events like not 767 * being able to associated to an AP. To flush the current cache 768 * contents before doing a scan the IEEE80211_IOC_SCAN_FLUSH flag may 769 * be specified. 770 * 771 * By default the scan will be done until a suitable AP is located 772 * or a channel is found for use. A scan can also be constrained 773 * to be done once (IEEE80211_IOC_SCAN_ONCE) or to last for no more 774 * than a specified duration. 775 */ 776 struct ieee80211_scan_req { 777 int sr_flags; 778 #define IEEE80211_IOC_SCAN_NOPICK 0x00001 /* scan only, no selection */ 779 #define IEEE80211_IOC_SCAN_ACTIVE 0x00002 /* active scan (probe req) */ 780 #define IEEE80211_IOC_SCAN_PICK1ST 0x00004 /* ``hey sailor'' mode */ 781 #define IEEE80211_IOC_SCAN_BGSCAN 0x00008 /* bg scan, exit ps at end */ 782 #define IEEE80211_IOC_SCAN_ONCE 0x00010 /* do one complete pass */ 783 #define IEEE80211_IOC_SCAN_NOBCAST 0x00020 /* don't send bcast probe req */ 784 #define IEEE80211_IOC_SCAN_NOJOIN 0x00040 /* no auto-sequencing */ 785 #define IEEE80211_IOC_SCAN_FLUSH 0x10000 /* flush scan cache first */ 786 #define IEEE80211_IOC_SCAN_CHECK 0x20000 /* check scan cache first */ 787 u_int sr_duration; /* duration (ms) */ 788 #define IEEE80211_IOC_SCAN_DURATION_MIN 1 789 #define IEEE80211_IOC_SCAN_DURATION_MAX 0x7fffffff 790 #define IEEE80211_IOC_SCAN_FOREVER IEEE80211_IOC_SCAN_DURATION_MAX 791 u_int sr_mindwell; /* min channel dwelltime (ms) */ 792 u_int sr_maxdwell; /* max channel dwelltime (ms) */ 793 int sr_nssid; 794 #define IEEE80211_IOC_SCAN_MAX_SSID 3 795 struct { 796 int len; /* length in bytes */ 797 uint8_t ssid[IEEE80211_NWID_LEN]; /* ssid contents */ 798 } sr_ssid[IEEE80211_IOC_SCAN_MAX_SSID]; 799 }; 800 801 /* 802 * Scan result data returned for IEEE80211_IOC_SCAN_RESULTS. 803 * Each result is a fixed size structure followed by a variable 804 * length SSID and one or more variable length information elements. 805 * The size of each variable length item is found in the fixed 806 * size structure and the entire length of the record is specified 807 * in isr_len. Result records are rounded to a multiple of 4 bytes. 808 */ 809 struct ieee80211req_scan_result { 810 uint16_t isr_len; /* total length (mult of 4) */ 811 uint16_t isr_ie_off; /* offset to SSID+IE data */ 812 uint16_t isr_ie_len; /* IE length */ 813 uint16_t isr_freq; /* MHz */ 814 uint16_t isr_flags; /* channel flags */ 815 int8_t isr_noise; 816 int8_t isr_rssi; 817 uint16_t isr_intval; /* beacon interval */ 818 uint8_t isr_capinfo; /* capabilities */ 819 uint8_t isr_erp; /* ERP element */ 820 uint8_t isr_bssid[IEEE80211_ADDR_LEN]; 821 uint8_t isr_nrates; 822 uint8_t isr_rates[IEEE80211_RATE_MAXSIZE]; 823 uint8_t isr_ssid_len; /* SSID length */ 824 uint8_t isr_meshid_len; /* MESH ID length */ 825 /* variable length SSID, followed by variable length MESH ID, 826 followed by IE data */ 827 }; 828 829 /* 830 * Virtual AP cloning parameters. The parent device must 831 * be a vap-capable device. All parameters specified with 832 * the clone request are fixed for the lifetime of the vap. 833 * 834 * There are two flavors of WDS vaps: legacy and dynamic. 835 * Legacy WDS operation implements a static binding between 836 * two stations encapsulating traffic in 4-address frames. 837 * Dynamic WDS vaps are created when a station associates to 838 * an AP and sends a 4-address frame. If the AP vap is 839 * configured to support WDS then this will generate an 840 * event to user programs listening on the routing socket 841 * and a Dynamic WDS vap will be created to handle traffic 842 * to/from that station. In both cases the bssid of the 843 * peer must be specified when creating the vap. 844 * 845 * By default a vap will inherit the mac address/bssid of 846 * the underlying device. To request a unique address the 847 * IEEE80211_CLONE_BSSID flag should be supplied. This is 848 * meaningless for WDS vaps as they share the bssid of an 849 * AP vap that must otherwise exist. Note that some devices 850 * may not be able to support multiple addresses. 851 * 852 * Station mode vap's normally depend on the device to notice 853 * when the AP stops sending beacon frames. If IEEE80211_CLONE_NOBEACONS 854 * is specified the net80211 layer will do this in s/w. This 855 * is mostly useful when setting up a WDS repeater/extender where 856 * an AP vap is combined with a sta vap and the device isn't able 857 * to track beacon frames in hardware. 858 */ 859 struct ieee80211_clone_params { 860 char icp_parent[IFNAMSIZ]; /* parent device */ 861 uint16_t icp_opmode; /* operating mode */ 862 uint16_t icp_flags; /* see below */ 863 uint8_t icp_bssid[IEEE80211_ADDR_LEN]; /* for WDS links */ 864 uint8_t icp_macaddr[IEEE80211_ADDR_LEN];/* local address */ 865 }; 866 #define IEEE80211_CLONE_BSSID 0x0001 /* allocate unique mac/bssid */ 867 #define IEEE80211_CLONE_NOBEACONS 0x0002 /* don't setup beacon timers */ 868 #define IEEE80211_CLONE_WDSLEGACY 0x0004 /* legacy WDS processing */ 869 #define IEEE80211_CLONE_MACADDR 0x0008 /* use specified mac addr */ 870 #define IEEE80211_CLONE_TDMA 0x0010 /* operate in TDMA mode */ 871 #endif /* __FreeBSD__ */ 872 873 #endif /* _NET80211_IEEE80211_IOCTL_H_ */ 874