1 /*- 2 * SPDX-License-Identifier: BSD-2-Clause-FreeBSD 3 * 4 * Copyright (c) 2007-2009 Sam Leffler, Errno Consulting 5 * All rights reserved. 6 * 7 * Redistribution and use in source and binary forms, with or without 8 * modification, are permitted provided that the following conditions 9 * are met: 10 * 1. Redistributions of source code must retain the above copyright 11 * notice, this list of conditions and the following disclaimer. 12 * 2. Redistributions in binary form must reproduce the above copyright 13 * notice, this list of conditions and the following disclaimer in the 14 * documentation and/or other materials provided with the distribution. 15 * 16 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR 17 * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES 18 * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. 19 * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, 20 * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT 21 * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, 22 * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY 23 * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT 24 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF 25 * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. 26 * 27 * $FreeBSD$ 28 */ 29 #ifndef _NET80211_IEEE80211_INPUT_H_ 30 #define _NET80211_IEEE80211_INPUT_H_ 31 32 /* Verify the existence and length of __elem or get out. */ 33 #define IEEE80211_VERIFY_ELEMENT(__elem, __maxlen, _action) do { \ 34 if ((__elem) == NULL) { \ 35 IEEE80211_DISCARD(vap, IEEE80211_MSG_ELEMID, \ 36 wh, NULL, "%s", "no " #__elem ); \ 37 vap->iv_stats.is_rx_elem_missing++; \ 38 _action; \ 39 } else if ((__elem)[1] > (__maxlen)) { \ 40 IEEE80211_DISCARD(vap, IEEE80211_MSG_ELEMID, \ 41 wh, NULL, "bad " #__elem " len %d", (__elem)[1]); \ 42 vap->iv_stats.is_rx_elem_toobig++; \ 43 _action; \ 44 } \ 45 } while (0) 46 47 #define IEEE80211_VERIFY_LENGTH(_len, _minlen, _action) do { \ 48 if ((_len) < (_minlen)) { \ 49 IEEE80211_DISCARD(vap, IEEE80211_MSG_ELEMID, \ 50 wh, NULL, "ie too short, got %d, expected %d", \ 51 (_len), (_minlen)); \ 52 vap->iv_stats.is_rx_elem_toosmall++; \ 53 _action; \ 54 } \ 55 } while (0) 56 57 #ifdef IEEE80211_DEBUG 58 void ieee80211_ssid_mismatch(struct ieee80211vap *, const char *tag, 59 uint8_t mac[IEEE80211_ADDR_LEN], uint8_t *ssid); 60 61 #define IEEE80211_VERIFY_SSID(_ni, _ssid, _action) do { \ 62 if ((_ssid)[1] != 0 && \ 63 ((_ssid)[1] != (_ni)->ni_esslen || \ 64 memcmp((_ssid) + 2, (_ni)->ni_essid, (_ssid)[1]) != 0)) { \ 65 if (ieee80211_msg_input(vap)) \ 66 ieee80211_ssid_mismatch(vap, \ 67 ieee80211_mgt_subtype_name(subtype), \ 68 wh->i_addr2, _ssid); \ 69 vap->iv_stats.is_rx_ssidmismatch++; \ 70 _action; \ 71 } \ 72 } while (0) 73 #else /* !IEEE80211_DEBUG */ 74 #define IEEE80211_VERIFY_SSID(_ni, _ssid, _action) do { \ 75 if ((_ssid)[1] != 0 && \ 76 ((_ssid)[1] != (_ni)->ni_esslen || \ 77 memcmp((_ssid) + 2, (_ni)->ni_essid, (_ssid)[1]) != 0)) { \ 78 vap->iv_stats.is_rx_ssidmismatch++; \ 79 _action; \ 80 } \ 81 } while (0) 82 #endif /* !IEEE80211_DEBUG */ 83 84 #include <sys/endian.h> /* For le16toh() / le32dec() */ 85 86 static __inline int 87 iswpaoui(const uint8_t *frm) 88 { 89 return frm[1] > 3 && le32dec(frm+2) == ((WPA_OUI_TYPE<<24)|WPA_OUI); 90 } 91 92 static __inline int 93 iswmeoui(const uint8_t *frm) 94 { 95 return frm[1] > 3 && le32dec(frm+2) == ((WME_OUI_TYPE<<24)|WME_OUI); 96 } 97 98 static __inline int 99 iswmeparam(const uint8_t *frm) 100 { 101 return frm[1] > 5 && le32dec(frm+2) == ((WME_OUI_TYPE<<24)|WME_OUI) && 102 frm[6] == WME_PARAM_OUI_SUBTYPE; 103 } 104 105 static __inline int 106 iswmeinfo(const uint8_t *frm) 107 { 108 return frm[1] > 5 && le32dec(frm+2) == ((WME_OUI_TYPE<<24)|WME_OUI) && 109 frm[6] == WME_INFO_OUI_SUBTYPE; 110 } 111 112 static __inline int 113 isatherosoui(const uint8_t *frm) 114 { 115 return frm[1] > 3 && le32dec(frm+2) == ((ATH_OUI_TYPE<<24)|ATH_OUI); 116 } 117 118 static __inline int 119 istdmaoui(const uint8_t *frm) 120 { 121 return frm[1] > 3 && le32dec(frm+2) == ((TDMA_OUI_TYPE<<24)|TDMA_OUI); 122 } 123 124 static __inline int 125 ishtcapoui(const uint8_t *frm) 126 { 127 return frm[1] > 3 && le32dec(frm+2) == ((BCM_OUI_HTCAP<<24)|BCM_OUI); 128 } 129 130 static __inline int 131 ishtinfooui(const uint8_t *frm) 132 { 133 return frm[1] > 3 && le32dec(frm+2) == ((BCM_OUI_HTINFO<<24)|BCM_OUI); 134 } 135 136 static __inline int 137 ieee80211_check_rxseq_amsdu(const struct ieee80211_rx_stats *rxs) 138 { 139 if (rxs == NULL) 140 return 0; 141 return (!! (rxs->c_pktflags & IEEE80211_RX_F_AMSDU)); 142 } 143 144 /* 145 * Return 1 if the rxseq check should increment the sequence 146 * number. Return 0 if it's part of an AMSDU batch and it isn't 147 * the final frame in the decap'ed burst. 148 */ 149 static __inline int 150 ieee80211_check_rxseq_amsdu_more(const struct ieee80211_rx_stats *rxs) 151 { 152 /* No state? ok */ 153 if (rxs == NULL) 154 return (1); 155 156 /* State but no AMSDU set? ok */ 157 if ((rxs->c_pktflags & IEEE80211_RX_F_AMSDU) == 0) 158 return (1); 159 160 /* State, AMSDU set, then _MORE means "don't inc yet" */ 161 if (rxs->c_pktflags & IEEE80211_RX_F_AMSDU_MORE) { 162 return (0); 163 } 164 165 /* Both are set, so return ok */ 166 return (1); 167 } 168 169 /* 170 * Check the current frame sequence number against the current TID 171 * state and return whether it's in sequence or should be dropped. 172 * 173 * Since out of order packet and duplicate packet eliminations should 174 * be done by the AMPDU RX code, this routine blindly accepts all 175 * frames from a HT station w/ a TID that is currently doing AMPDU-RX. 176 * HT stations without WME or where the TID is not doing AMPDU-RX 177 * are checked like non-HT stations. 178 * 179 * The routine only eliminates packets whose sequence/fragment 180 * match or are less than the last seen sequence/fragment number 181 * AND are retransmits. It doesn't try to eliminate out of order packets. 182 * 183 * Since all frames after sequence number 4095 will be less than 4095 184 * (as the seqnum wraps), handle that special case so packets aren't 185 * incorrectly dropped - ie, if the next packet is sequence number 0 186 * but a retransmit since the initial packet didn't make it. 187 * 188 * XXX TODO: handle sequence number space wrapping with dropped frames; 189 * especially in high interference conditions under high traffic load 190 * The RX AMPDU reorder code also needs it. 191 * 192 * XXX TODO: update for 802.11-2012 9.3.2.10 Duplicate Detection and Recovery. 193 */ 194 static __inline int 195 ieee80211_check_rxseq(struct ieee80211_node *ni, struct ieee80211_frame *wh, 196 uint8_t *bssid, const struct ieee80211_rx_stats *rxs) 197 { 198 #define SEQ_LEQ(a,b) ((int)((a)-(b)) <= 0) 199 #define SEQ_EQ(a,b) ((int)((a)-(b)) == 0) 200 #define SEQNO(a) ((a) >> IEEE80211_SEQ_SEQ_SHIFT) 201 #define FRAGNO(a) ((a) & IEEE80211_SEQ_FRAG_MASK) 202 struct ieee80211vap *vap = ni->ni_vap; 203 uint16_t rxseq; 204 uint8_t type, subtype; 205 uint8_t tid; 206 struct ieee80211_rx_ampdu *rap; 207 208 rxseq = le16toh(*(uint16_t *)wh->i_seq); 209 type = wh->i_fc[0] & IEEE80211_FC0_TYPE_MASK; 210 subtype = wh->i_fc[0] & IEEE80211_FC0_SUBTYPE_MASK; 211 212 /* 213 * Types with no sequence number (or QoS (+)Null frames) 214 * are always treated valid. 215 */ 216 if (! IEEE80211_HAS_SEQ(type, subtype)) 217 return 1; 218 219 /* 220 * Always allow multicast frames for now - QoS (any TID) 221 * or not. 222 */ 223 if (IEEE80211_IS_MULTICAST(wh->i_addr1)) 224 return 1; 225 226 tid = ieee80211_gettid(wh); 227 228 /* 229 * Only do the HT AMPDU check for WME stations; non-WME HT stations 230 * shouldn't exist outside of debugging. We should at least 231 * handle that. 232 */ 233 if (tid < WME_NUM_TID) { 234 rap = &ni->ni_rx_ampdu[tid]; 235 /* HT nodes currently doing RX AMPDU are always valid */ 236 if ((ni->ni_flags & IEEE80211_NODE_HT) && 237 (rap->rxa_flags & IEEE80211_AGGR_RUNNING)) 238 goto ok; 239 } 240 241 /* 242 * Otherwise, retries for packets below or equal to the last 243 * seen sequence number should be dropped. 244 */ 245 246 /* 247 * Treat frame seqnum 4095 as special due to boundary 248 * wrapping conditions. 249 */ 250 if (SEQNO(ni->ni_rxseqs[tid]) == 4095) { 251 /* 252 * Drop retransmits on seqnum 4095/current fragment for itself. 253 */ 254 if (SEQ_EQ(rxseq, ni->ni_rxseqs[tid]) && 255 (wh->i_fc[1] & IEEE80211_FC1_RETRY)) 256 goto fail; 257 /* 258 * Treat any subsequent frame as fine if the last seen frame 259 * is 4095 and it's not a retransmit for the same sequence 260 * number. However, this doesn't capture incorrectly ordered 261 * fragments w/ sequence number 4095. It shouldn't be seen 262 * in practice, but see the comment above for further info. 263 */ 264 goto ok; 265 } 266 267 /* 268 * At this point we assume that retransmitted seq/frag numbers below 269 * the current can simply be eliminated. 270 */ 271 if ((wh->i_fc[1] & IEEE80211_FC1_RETRY) && 272 SEQ_LEQ(rxseq, ni->ni_rxseqs[tid])) 273 goto fail; 274 275 ok: 276 /* 277 * Only bump the sequence number if it's the last frame 278 * in a batch. That way frames in the rest of the batch 279 * get included, and the last frame in the batch kicks 280 * it next. 281 */ 282 if (ieee80211_check_rxseq_amsdu_more(rxs)) { 283 ni->ni_rxseqs[tid] = rxseq; 284 if ((rxs != NULL) && ieee80211_check_rxseq_amsdu(rxs)) 285 IEEE80211_NODE_STAT(ni, rx_amsdu_more_end); 286 } else { 287 /* .. still waiting */ 288 IEEE80211_NODE_STAT(ni, rx_amsdu_more); 289 } 290 291 return 1; 292 293 fail: 294 /* duplicate, discard */ 295 IEEE80211_DISCARD_MAC(vap, IEEE80211_MSG_INPUT, bssid, "duplicate", 296 "seqno <%u,%u> fragno <%u,%u> tid %u", 297 SEQNO(rxseq), SEQNO(ni->ni_rxseqs[tid]), 298 FRAGNO(rxseq), FRAGNO(ni->ni_rxseqs[tid]), tid); 299 vap->iv_stats.is_rx_dup++; 300 IEEE80211_NODE_STAT(ni, rx_dup); 301 302 return 0; 303 #undef SEQ_LEQ 304 #undef SEQ_EQ 305 #undef SEQNO 306 #undef FRAGNO 307 } 308 309 void ieee80211_deliver_data(struct ieee80211vap *, 310 struct ieee80211_node *, struct mbuf *); 311 struct mbuf *ieee80211_defrag(struct ieee80211_node *, 312 struct mbuf *, int, int); 313 struct mbuf *ieee80211_realign(struct ieee80211vap *, struct mbuf *, size_t); 314 struct mbuf *ieee80211_decap(struct ieee80211vap *, struct mbuf *, int, 315 uint8_t); 316 struct mbuf *ieee80211_decap1(struct mbuf *, int *); 317 int ieee80211_setup_rates(struct ieee80211_node *ni, 318 const uint8_t *rates, const uint8_t *xrates, int flags); 319 void ieee80211_send_error(struct ieee80211_node *, 320 const uint8_t mac[IEEE80211_ADDR_LEN], int subtype, int arg); 321 int ieee80211_alloc_challenge(struct ieee80211_node *); 322 int ieee80211_parse_beacon(struct ieee80211_node *, struct mbuf *, 323 struct ieee80211_channel *, 324 struct ieee80211_scanparams *); 325 int ieee80211_parse_action(struct ieee80211_node *, struct mbuf *); 326 #endif /* _NET80211_IEEE80211_INPUT_H_ */ 327