1 /*- 2 * Copyright (c) 2001 Atsushi Onoe 3 * Copyright (c) 2002-2008 Sam Leffler, Errno Consulting 4 * All rights reserved. 5 * 6 * Redistribution and use in source and binary forms, with or without 7 * modification, are permitted provided that the following conditions 8 * are met: 9 * 1. Redistributions of source code must retain the above copyright 10 * notice, this list of conditions and the following disclaimer. 11 * 2. Redistributions in binary form must reproduce the above copyright 12 * notice, this list of conditions and the following disclaimer in the 13 * documentation and/or other materials provided with the distribution. 14 * 15 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR 16 * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES 17 * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. 18 * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, 19 * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT 20 * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, 21 * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY 22 * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT 23 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF 24 * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. 25 * 26 * $FreeBSD$ 27 */ 28 #ifndef _NET80211__IEEE80211_H_ 29 #define _NET80211__IEEE80211_H_ 30 31 /* 32 * 802.11 implementation definitions. 33 * 34 * NB: this file is used by applications. 35 */ 36 37 /* 38 * PHY type; mostly used to identify FH phys. 39 */ 40 enum ieee80211_phytype { 41 IEEE80211_T_DS, /* direct sequence spread spectrum */ 42 IEEE80211_T_FH, /* frequency hopping */ 43 IEEE80211_T_OFDM, /* frequency division multiplexing */ 44 IEEE80211_T_TURBO, /* high rate OFDM, aka turbo mode */ 45 IEEE80211_T_HT, /* high throughput */ 46 IEEE80211_T_OFDM_HALF, /* 1/2 rate OFDM */ 47 IEEE80211_T_OFDM_QUARTER, /* 1/4 rate OFDM */ 48 }; 49 #define IEEE80211_T_CCK IEEE80211_T_DS /* more common nomenclature */ 50 51 /* 52 * PHY mode; this is not really a mode as multi-mode devices 53 * have multiple PHY's. Mode is mostly used as a shorthand 54 * for constraining which channels to consider in setting up 55 * operation. Modes used to be used more extensively when 56 * channels were identified as IEEE channel numbers. 57 */ 58 enum ieee80211_phymode { 59 IEEE80211_MODE_AUTO = 0, /* autoselect */ 60 IEEE80211_MODE_11A = 1, /* 5GHz, OFDM */ 61 IEEE80211_MODE_11B = 2, /* 2GHz, CCK */ 62 IEEE80211_MODE_11G = 3, /* 2GHz, OFDM */ 63 IEEE80211_MODE_FH = 4, /* 2GHz, GFSK */ 64 IEEE80211_MODE_TURBO_A = 5, /* 5GHz, OFDM, 2x clock */ 65 IEEE80211_MODE_TURBO_G = 6, /* 2GHz, OFDM, 2x clock */ 66 IEEE80211_MODE_STURBO_A = 7, /* 5GHz, OFDM, 2x clock, static */ 67 IEEE80211_MODE_11NA = 8, /* 5GHz, w/ HT */ 68 IEEE80211_MODE_11NG = 9, /* 2GHz, w/ HT */ 69 IEEE80211_MODE_HALF = 10, /* OFDM, 1/2x clock */ 70 IEEE80211_MODE_QUARTER = 11, /* OFDM, 1/4x clock */ 71 }; 72 #define IEEE80211_MODE_MAX (IEEE80211_MODE_QUARTER+1) 73 74 /* 75 * Operating mode. Devices do not necessarily support 76 * all modes; they indicate which are supported in their 77 * capabilities. 78 */ 79 enum ieee80211_opmode { 80 IEEE80211_M_IBSS = 0, /* IBSS (adhoc) station */ 81 IEEE80211_M_STA = 1, /* infrastructure station */ 82 IEEE80211_M_WDS = 2, /* WDS link */ 83 IEEE80211_M_AHDEMO = 3, /* Old lucent compatible adhoc demo */ 84 IEEE80211_M_HOSTAP = 4, /* Software Access Point */ 85 IEEE80211_M_MONITOR = 5, /* Monitor mode */ 86 IEEE80211_M_MBSS = 6, /* MBSS (Mesh Point) link */ 87 }; 88 #define IEEE80211_OPMODE_MAX (IEEE80211_M_MBSS+1) 89 90 /* 91 * 802.11g/802.11n protection mode. 92 */ 93 enum ieee80211_protmode { 94 IEEE80211_PROT_NONE = 0, /* no protection */ 95 IEEE80211_PROT_CTSONLY = 1, /* CTS to self */ 96 IEEE80211_PROT_RTSCTS = 2, /* RTS-CTS */ 97 }; 98 99 /* 100 * Authentication mode. The open and shared key authentication 101 * modes are implemented within the 802.11 layer. 802.1x and 102 * WPA/802.11i are implemented in user mode by setting the 103 * 802.11 layer into IEEE80211_AUTH_8021X and deferring 104 * authentication to user space programs. 105 */ 106 enum ieee80211_authmode { 107 IEEE80211_AUTH_NONE = 0, 108 IEEE80211_AUTH_OPEN = 1, /* open */ 109 IEEE80211_AUTH_SHARED = 2, /* shared-key */ 110 IEEE80211_AUTH_8021X = 3, /* 802.1x */ 111 IEEE80211_AUTH_AUTO = 4, /* auto-select/accept */ 112 /* NB: these are used only for ioctls */ 113 IEEE80211_AUTH_WPA = 5, /* WPA/RSN w/ 802.1x/PSK */ 114 }; 115 116 /* 117 * Roaming mode is effectively who controls the operation 118 * of the 802.11 state machine when operating as a station. 119 * State transitions are controlled either by the driver 120 * (typically when management frames are processed by the 121 * hardware/firmware), the host (auto/normal operation of 122 * the 802.11 layer), or explicitly through ioctl requests 123 * when applications like wpa_supplicant want control. 124 */ 125 enum ieee80211_roamingmode { 126 IEEE80211_ROAMING_DEVICE= 0, /* driver/hardware control */ 127 IEEE80211_ROAMING_AUTO = 1, /* 802.11 layer control */ 128 IEEE80211_ROAMING_MANUAL= 2, /* application control */ 129 }; 130 131 /* 132 * Channels are specified by frequency and attributes. 133 */ 134 struct ieee80211_channel { 135 uint32_t ic_flags; /* see below */ 136 uint16_t ic_freq; /* setting in MHz */ 137 uint8_t ic_ieee; /* IEEE channel number */ 138 int8_t ic_maxregpower; /* maximum regulatory tx power in dBm */ 139 int8_t ic_maxpower; /* maximum tx power in .5 dBm */ 140 int8_t ic_minpower; /* minimum tx power in .5 dBm */ 141 uint8_t ic_state; /* dynamic state */ 142 uint8_t ic_extieee; /* HT40 extension channel number */ 143 int8_t ic_maxantgain; /* maximum antenna gain in .5 dBm */ 144 uint8_t ic_pad; 145 uint16_t ic_devdata; /* opaque device/driver data */ 146 }; 147 148 #define IEEE80211_CHAN_MAX 256 149 #define IEEE80211_CHAN_BYTES 32 /* howmany(IEEE80211_CHAN_MAX, NBBY) */ 150 #define IEEE80211_CHAN_ANY 0xffff /* token for ``any channel'' */ 151 #define IEEE80211_CHAN_ANYC \ 152 ((struct ieee80211_channel *) IEEE80211_CHAN_ANY) 153 154 /* channel attributes */ 155 #define IEEE80211_CHAN_PRIV0 0x00000001 /* driver private bit 0 */ 156 #define IEEE80211_CHAN_PRIV1 0x00000002 /* driver private bit 1 */ 157 #define IEEE80211_CHAN_PRIV2 0x00000004 /* driver private bit 2 */ 158 #define IEEE80211_CHAN_PRIV3 0x00000008 /* driver private bit 3 */ 159 #define IEEE80211_CHAN_TURBO 0x00000010 /* Turbo channel */ 160 #define IEEE80211_CHAN_CCK 0x00000020 /* CCK channel */ 161 #define IEEE80211_CHAN_OFDM 0x00000040 /* OFDM channel */ 162 #define IEEE80211_CHAN_2GHZ 0x00000080 /* 2 GHz spectrum channel. */ 163 #define IEEE80211_CHAN_5GHZ 0x00000100 /* 5 GHz spectrum channel */ 164 #define IEEE80211_CHAN_PASSIVE 0x00000200 /* Only passive scan allowed */ 165 #define IEEE80211_CHAN_DYN 0x00000400 /* Dynamic CCK-OFDM channel */ 166 #define IEEE80211_CHAN_GFSK 0x00000800 /* GFSK channel (FHSS PHY) */ 167 #define IEEE80211_CHAN_GSM 0x00001000 /* 900 MHz spectrum channel */ 168 #define IEEE80211_CHAN_STURBO 0x00002000 /* 11a static turbo channel only */ 169 #define IEEE80211_CHAN_HALF 0x00004000 /* Half rate channel */ 170 #define IEEE80211_CHAN_QUARTER 0x00008000 /* Quarter rate channel */ 171 #define IEEE80211_CHAN_HT20 0x00010000 /* HT 20 channel */ 172 #define IEEE80211_CHAN_HT40U 0x00020000 /* HT 40 channel w/ ext above */ 173 #define IEEE80211_CHAN_HT40D 0x00040000 /* HT 40 channel w/ ext below */ 174 #define IEEE80211_CHAN_DFS 0x00080000 /* DFS required */ 175 #define IEEE80211_CHAN_4MSXMIT 0x00100000 /* 4ms limit on frame length */ 176 #define IEEE80211_CHAN_NOADHOC 0x00200000 /* adhoc mode not allowed */ 177 #define IEEE80211_CHAN_NOHOSTAP 0x00400000 /* hostap mode not allowed */ 178 #define IEEE80211_CHAN_11D 0x00800000 /* 802.11d required */ 179 180 #define IEEE80211_CHAN_HT40 (IEEE80211_CHAN_HT40U | IEEE80211_CHAN_HT40D) 181 #define IEEE80211_CHAN_HT (IEEE80211_CHAN_HT20 | IEEE80211_CHAN_HT40) 182 183 #define IEEE80211_CHAN_BITS \ 184 "\20\1PRIV0\2PRIV2\3PRIV3\4PRIV4\5TURBO\6CCK\7OFDM\0102GHZ\0115GHZ" \ 185 "\12PASSIVE\13DYN\14GFSK\15GSM\16STURBO\17HALF\20QUARTER\21HT20" \ 186 "\22HT40U\23HT40D\24DFS\0254MSXMIT\26NOADHOC\27NOHOSTAP\03011D" 187 188 /* 189 * Useful combinations of channel characteristics. 190 */ 191 #define IEEE80211_CHAN_FHSS \ 192 (IEEE80211_CHAN_2GHZ | IEEE80211_CHAN_GFSK) 193 #define IEEE80211_CHAN_A \ 194 (IEEE80211_CHAN_5GHZ | IEEE80211_CHAN_OFDM) 195 #define IEEE80211_CHAN_B \ 196 (IEEE80211_CHAN_2GHZ | IEEE80211_CHAN_CCK) 197 #define IEEE80211_CHAN_PUREG \ 198 (IEEE80211_CHAN_2GHZ | IEEE80211_CHAN_OFDM) 199 #define IEEE80211_CHAN_G \ 200 (IEEE80211_CHAN_2GHZ | IEEE80211_CHAN_DYN) 201 #define IEEE80211_CHAN_108A \ 202 (IEEE80211_CHAN_A | IEEE80211_CHAN_TURBO) 203 #define IEEE80211_CHAN_108G \ 204 (IEEE80211_CHAN_PUREG | IEEE80211_CHAN_TURBO) 205 #define IEEE80211_CHAN_ST \ 206 (IEEE80211_CHAN_108A | IEEE80211_CHAN_STURBO) 207 208 #define IEEE80211_CHAN_ALL \ 209 (IEEE80211_CHAN_2GHZ | IEEE80211_CHAN_5GHZ | IEEE80211_CHAN_GFSK | \ 210 IEEE80211_CHAN_CCK | IEEE80211_CHAN_OFDM | IEEE80211_CHAN_DYN | \ 211 IEEE80211_CHAN_HALF | IEEE80211_CHAN_QUARTER | \ 212 IEEE80211_CHAN_HT) 213 #define IEEE80211_CHAN_ALLTURBO \ 214 (IEEE80211_CHAN_ALL | IEEE80211_CHAN_TURBO | IEEE80211_CHAN_STURBO) 215 216 #define IEEE80211_IS_CHAN_FHSS(_c) \ 217 (((_c)->ic_flags & IEEE80211_CHAN_FHSS) == IEEE80211_CHAN_FHSS) 218 #define IEEE80211_IS_CHAN_A(_c) \ 219 (((_c)->ic_flags & IEEE80211_CHAN_A) == IEEE80211_CHAN_A) 220 #define IEEE80211_IS_CHAN_B(_c) \ 221 (((_c)->ic_flags & IEEE80211_CHAN_B) == IEEE80211_CHAN_B) 222 #define IEEE80211_IS_CHAN_PUREG(_c) \ 223 (((_c)->ic_flags & IEEE80211_CHAN_PUREG) == IEEE80211_CHAN_PUREG) 224 #define IEEE80211_IS_CHAN_G(_c) \ 225 (((_c)->ic_flags & IEEE80211_CHAN_G) == IEEE80211_CHAN_G) 226 #define IEEE80211_IS_CHAN_ANYG(_c) \ 227 (IEEE80211_IS_CHAN_PUREG(_c) || IEEE80211_IS_CHAN_G(_c)) 228 #define IEEE80211_IS_CHAN_ST(_c) \ 229 (((_c)->ic_flags & IEEE80211_CHAN_ST) == IEEE80211_CHAN_ST) 230 #define IEEE80211_IS_CHAN_108A(_c) \ 231 (((_c)->ic_flags & IEEE80211_CHAN_108A) == IEEE80211_CHAN_108A) 232 #define IEEE80211_IS_CHAN_108G(_c) \ 233 (((_c)->ic_flags & IEEE80211_CHAN_108G) == IEEE80211_CHAN_108G) 234 235 #define IEEE80211_IS_CHAN_2GHZ(_c) \ 236 (((_c)->ic_flags & IEEE80211_CHAN_2GHZ) != 0) 237 #define IEEE80211_IS_CHAN_5GHZ(_c) \ 238 (((_c)->ic_flags & IEEE80211_CHAN_5GHZ) != 0) 239 #define IEEE80211_IS_CHAN_PASSIVE(_c) \ 240 (((_c)->ic_flags & IEEE80211_CHAN_PASSIVE) != 0) 241 #define IEEE80211_IS_CHAN_OFDM(_c) \ 242 (((_c)->ic_flags & (IEEE80211_CHAN_OFDM | IEEE80211_CHAN_DYN)) != 0) 243 #define IEEE80211_IS_CHAN_CCK(_c) \ 244 (((_c)->ic_flags & (IEEE80211_CHAN_CCK | IEEE80211_CHAN_DYN)) != 0) 245 #define IEEE80211_IS_CHAN_DYN(_c) \ 246 (((_c)->ic_flags & IEEE80211_CHAN_DYN) == IEEE80211_CHAN_DYN) 247 #define IEEE80211_IS_CHAN_GFSK(_c) \ 248 (((_c)->ic_flags & IEEE80211_CHAN_GFSK) != 0) 249 #define IEEE80211_IS_CHAN_TURBO(_c) \ 250 (((_c)->ic_flags & IEEE80211_CHAN_TURBO) != 0) 251 #define IEEE80211_IS_CHAN_STURBO(_c) \ 252 (((_c)->ic_flags & IEEE80211_CHAN_STURBO) != 0) 253 #define IEEE80211_IS_CHAN_DTURBO(_c) \ 254 (((_c)->ic_flags & \ 255 (IEEE80211_CHAN_TURBO | IEEE80211_CHAN_STURBO)) == IEEE80211_CHAN_TURBO) 256 #define IEEE80211_IS_CHAN_HALF(_c) \ 257 (((_c)->ic_flags & IEEE80211_CHAN_HALF) != 0) 258 #define IEEE80211_IS_CHAN_QUARTER(_c) \ 259 (((_c)->ic_flags & IEEE80211_CHAN_QUARTER) != 0) 260 #define IEEE80211_IS_CHAN_FULL(_c) \ 261 (((_c)->ic_flags & (IEEE80211_CHAN_QUARTER | IEEE80211_CHAN_HALF)) == 0) 262 #define IEEE80211_IS_CHAN_GSM(_c) \ 263 (((_c)->ic_flags & IEEE80211_CHAN_GSM) != 0) 264 #define IEEE80211_IS_CHAN_HT(_c) \ 265 (((_c)->ic_flags & IEEE80211_CHAN_HT) != 0) 266 #define IEEE80211_IS_CHAN_HT20(_c) \ 267 (((_c)->ic_flags & IEEE80211_CHAN_HT20) != 0) 268 #define IEEE80211_IS_CHAN_HT40(_c) \ 269 (((_c)->ic_flags & IEEE80211_CHAN_HT40) != 0) 270 #define IEEE80211_IS_CHAN_HT40U(_c) \ 271 (((_c)->ic_flags & IEEE80211_CHAN_HT40U) != 0) 272 #define IEEE80211_IS_CHAN_HT40D(_c) \ 273 (((_c)->ic_flags & IEEE80211_CHAN_HT40D) != 0) 274 #define IEEE80211_IS_CHAN_HTA(_c) \ 275 (IEEE80211_IS_CHAN_5GHZ(_c) && \ 276 ((_c)->ic_flags & IEEE80211_CHAN_HT) != 0) 277 #define IEEE80211_IS_CHAN_HTG(_c) \ 278 (IEEE80211_IS_CHAN_2GHZ(_c) && \ 279 ((_c)->ic_flags & IEEE80211_CHAN_HT) != 0) 280 #define IEEE80211_IS_CHAN_DFS(_c) \ 281 (((_c)->ic_flags & IEEE80211_CHAN_DFS) != 0) 282 #define IEEE80211_IS_CHAN_NOADHOC(_c) \ 283 (((_c)->ic_flags & IEEE80211_CHAN_NOADHOC) != 0) 284 #define IEEE80211_IS_CHAN_NOHOSTAP(_c) \ 285 (((_c)->ic_flags & IEEE80211_CHAN_NOHOSTAP) != 0) 286 #define IEEE80211_IS_CHAN_11D(_c) \ 287 (((_c)->ic_flags & IEEE80211_CHAN_11D) != 0) 288 289 #define IEEE80211_CHAN2IEEE(_c) (_c)->ic_ieee 290 291 /* dynamic state */ 292 #define IEEE80211_CHANSTATE_RADAR 0x01 /* radar detected */ 293 #define IEEE80211_CHANSTATE_CACDONE 0x02 /* CAC completed */ 294 #define IEEE80211_CHANSTATE_CWINT 0x04 /* interference detected */ 295 #define IEEE80211_CHANSTATE_NORADAR 0x10 /* post notify on radar clear */ 296 297 #define IEEE80211_IS_CHAN_RADAR(_c) \ 298 (((_c)->ic_state & IEEE80211_CHANSTATE_RADAR) != 0) 299 #define IEEE80211_IS_CHAN_CACDONE(_c) \ 300 (((_c)->ic_state & IEEE80211_CHANSTATE_CACDONE) != 0) 301 #define IEEE80211_IS_CHAN_CWINT(_c) \ 302 (((_c)->ic_state & IEEE80211_CHANSTATE_CWINT) != 0) 303 304 /* ni_chan encoding for FH phy */ 305 #define IEEE80211_FH_CHANMOD 80 306 #define IEEE80211_FH_CHAN(set,pat) (((set)-1)*IEEE80211_FH_CHANMOD+(pat)) 307 #define IEEE80211_FH_CHANSET(chan) ((chan)/IEEE80211_FH_CHANMOD+1) 308 #define IEEE80211_FH_CHANPAT(chan) ((chan)%IEEE80211_FH_CHANMOD) 309 310 #define IEEE80211_TID_SIZE (WME_NUM_TID+1) /* WME TID's +1 for non-QoS */ 311 #define IEEE80211_NONQOS_TID WME_NUM_TID /* index for non-QoS sta */ 312 313 /* 314 * The 802.11 spec says at most 2007 stations may be 315 * associated at once. For most AP's this is way more 316 * than is feasible so we use a default of 128. This 317 * number may be overridden by the driver and/or by 318 * user configuration but may not be less than IEEE80211_AID_MIN. 319 */ 320 #define IEEE80211_AID_DEF 128 321 #define IEEE80211_AID_MIN 16 322 323 /* 324 * 802.11 rate set. 325 */ 326 #define IEEE80211_RATE_SIZE 8 /* 802.11 standard */ 327 #define IEEE80211_RATE_MAXSIZE 15 /* max rates we'll handle */ 328 329 struct ieee80211_rateset { 330 uint8_t rs_nrates; 331 uint8_t rs_rates[IEEE80211_RATE_MAXSIZE]; 332 }; 333 334 /* 335 * 802.11n variant of ieee80211_rateset. Instead of 336 * legacy rates the entries are MCS rates. We define 337 * the structure such that it can be used interchangeably 338 * with an ieee80211_rateset (modulo structure size). 339 */ 340 #define IEEE80211_HTRATE_MAXSIZE 77 341 342 struct ieee80211_htrateset { 343 uint8_t rs_nrates; 344 uint8_t rs_rates[IEEE80211_HTRATE_MAXSIZE]; 345 }; 346 347 #define IEEE80211_RATE_MCS 0x80 348 349 /* 350 * Per-mode transmit parameters/controls visible to user space. 351 * These can be used to set fixed transmit rate for all operating 352 * modes or on a per-client basis according to the capabilities 353 * of the client (e.g. an 11b client associated to an 11g ap). 354 * 355 * MCS are distinguished from legacy rates by or'ing in 0x80. 356 */ 357 struct ieee80211_txparam { 358 uint8_t ucastrate; /* ucast data rate (legacy/MCS|0x80) */ 359 uint8_t mgmtrate; /* mgmt frame rate (legacy/MCS|0x80) */ 360 uint8_t mcastrate; /* multicast rate (legacy/MCS|0x80) */ 361 uint8_t maxretry; /* max unicast data retry count */ 362 }; 363 364 /* 365 * Per-mode roaming state visible to user space. There are two 366 * thresholds that control whether roaming is considered; when 367 * either is exceeded the 802.11 layer will check the scan cache 368 * for another AP. If the cache is stale then a scan may be 369 * triggered. 370 */ 371 struct ieee80211_roamparam { 372 int8_t rssi; /* rssi thresh (.5 dBm) */ 373 uint8_t rate; /* tx rate thresh (.5 Mb/s or MCS) */ 374 uint16_t pad; /* reserve */ 375 }; 376 377 /* 378 * Regulatory Information. 379 */ 380 struct ieee80211_regdomain { 381 uint16_t regdomain; /* SKU */ 382 uint16_t country; /* ISO country code */ 383 uint8_t location; /* I (indoor), O (outdoor), other */ 384 uint8_t ecm; /* Extended Channel Mode */ 385 char isocc[2]; /* country code string */ 386 short pad[2]; 387 }; 388 389 /* 390 * MIMO antenna/radio state. 391 */ 392 393 #define IEEE80211_MAX_CHAINS 3 394 #define IEEE80211_MAX_EVM_PILOTS 6 395 396 /* 397 * XXX This doesn't yet export both ctl/ext chain details 398 */ 399 struct ieee80211_mimo_info { 400 int8_t rssi[IEEE80211_MAX_CHAINS]; /* per-antenna rssi */ 401 int8_t noise[IEEE80211_MAX_CHAINS]; /* per-antenna noise floor */ 402 uint8_t pad[2]; 403 uint32_t evm[3]; /* EVM data */ 404 }; 405 #endif /* _NET80211__IEEE80211_H_ */ 406