1 /*- 2 * SPDX-License-Identifier: BSD-2-Clause-FreeBSD 3 * 4 * Copyright (c) 2001-2002 Luigi Rizzo 5 * 6 * Supported by: the Xorp Project (www.xorp.org) 7 * 8 * Redistribution and use in source and binary forms, with or without 9 * modification, are permitted provided that the following conditions 10 * are met: 11 * 1. Redistributions of source code must retain the above copyright 12 * notice, this list of conditions and the following disclaimer. 13 * 2. Redistributions in binary form must reproduce the above copyright 14 * notice, this list of conditions and the following disclaimer in the 15 * documentation and/or other materials provided with the distribution. 16 * 17 * THIS SOFTWARE IS PROVIDED BY THE AUTHORS AND CONTRIBUTORS ``AS IS'' AND 18 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE 19 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE 20 * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHORS OR CONTRIBUTORS BE LIABLE 21 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL 22 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS 23 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) 24 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT 25 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY 26 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF 27 * SUCH DAMAGE. 28 */ 29 30 #include <sys/cdefs.h> 31 __FBSDID("$FreeBSD$"); 32 33 #include "opt_device_polling.h" 34 35 #include <sys/param.h> 36 #include <sys/systm.h> 37 #include <sys/kernel.h> 38 #include <sys/kthread.h> 39 #include <sys/proc.h> 40 #include <sys/epoch.h> 41 #include <sys/eventhandler.h> 42 #include <sys/resourcevar.h> 43 #include <sys/socket.h> /* needed by net/if.h */ 44 #include <sys/sockio.h> 45 #include <sys/sysctl.h> 46 #include <sys/syslog.h> 47 48 #include <net/if.h> 49 #include <net/if_var.h> 50 #include <net/netisr.h> /* for NETISR_POLL */ 51 #include <net/vnet.h> 52 53 void hardclock_device_poll(void); /* hook from hardclock */ 54 55 static struct mtx poll_mtx; 56 57 /* 58 * Polling support for [network] device drivers. 59 * 60 * Drivers which support this feature can register with the 61 * polling code. 62 * 63 * If registration is successful, the driver must disable interrupts, 64 * and further I/O is performed through the handler, which is invoked 65 * (at least once per clock tick) with 3 arguments: the "arg" passed at 66 * register time (a struct ifnet pointer), a command, and a "count" limit. 67 * 68 * The command can be one of the following: 69 * POLL_ONLY: quick move of "count" packets from input/output queues. 70 * POLL_AND_CHECK_STATUS: as above, plus check status registers or do 71 * other more expensive operations. This command is issued periodically 72 * but less frequently than POLL_ONLY. 73 * 74 * The count limit specifies how much work the handler can do during the 75 * call -- typically this is the number of packets to be received, or 76 * transmitted, etc. (drivers are free to interpret this number, as long 77 * as the max time spent in the function grows roughly linearly with the 78 * count). 79 * 80 * Polling is enabled and disabled via setting IFCAP_POLLING flag on 81 * the interface. The driver ioctl handler should register interface 82 * with polling and disable interrupts, if registration was successful. 83 * 84 * A second variable controls the sharing of CPU between polling/kernel 85 * network processing, and other activities (typically userlevel tasks): 86 * kern.polling.user_frac (between 0 and 100, default 50) sets the share 87 * of CPU allocated to user tasks. CPU is allocated proportionally to the 88 * shares, by dynamically adjusting the "count" (poll_burst). 89 * 90 * Other parameters can should be left to their default values. 91 * The following constraints hold 92 * 93 * 1 <= poll_each_burst <= poll_burst <= poll_burst_max 94 * MIN_POLL_BURST_MAX <= poll_burst_max <= MAX_POLL_BURST_MAX 95 */ 96 97 #define MIN_POLL_BURST_MAX 10 98 #define MAX_POLL_BURST_MAX 20000 99 100 static uint32_t poll_burst = 5; 101 static uint32_t poll_burst_max = 150; /* good for 100Mbit net and HZ=1000 */ 102 static uint32_t poll_each_burst = 5; 103 104 static SYSCTL_NODE(_kern, OID_AUTO, polling, CTLFLAG_RW | CTLFLAG_MPSAFE, 0, 105 "Device polling parameters"); 106 107 SYSCTL_UINT(_kern_polling, OID_AUTO, burst, CTLFLAG_RD, 108 &poll_burst, 0, "Current polling burst size"); 109 110 static int netisr_poll_scheduled; 111 static int netisr_pollmore_scheduled; 112 static int poll_shutting_down; 113 114 static int poll_burst_max_sysctl(SYSCTL_HANDLER_ARGS) 115 { 116 uint32_t val = poll_burst_max; 117 int error; 118 119 error = sysctl_handle_int(oidp, &val, 0, req); 120 if (error || !req->newptr ) 121 return (error); 122 if (val < MIN_POLL_BURST_MAX || val > MAX_POLL_BURST_MAX) 123 return (EINVAL); 124 125 mtx_lock(&poll_mtx); 126 poll_burst_max = val; 127 if (poll_burst > poll_burst_max) 128 poll_burst = poll_burst_max; 129 if (poll_each_burst > poll_burst_max) 130 poll_each_burst = MIN_POLL_BURST_MAX; 131 mtx_unlock(&poll_mtx); 132 133 return (0); 134 } 135 SYSCTL_PROC(_kern_polling, OID_AUTO, burst_max, 136 CTLTYPE_UINT | CTLFLAG_RW | CTLFLAG_MPSAFE, 0, sizeof(uint32_t), 137 poll_burst_max_sysctl, "I", 138 "Max Polling burst size"); 139 140 static int poll_each_burst_sysctl(SYSCTL_HANDLER_ARGS) 141 { 142 uint32_t val = poll_each_burst; 143 int error; 144 145 error = sysctl_handle_int(oidp, &val, 0, req); 146 if (error || !req->newptr ) 147 return (error); 148 if (val < 1) 149 return (EINVAL); 150 151 mtx_lock(&poll_mtx); 152 if (val > poll_burst_max) { 153 mtx_unlock(&poll_mtx); 154 return (EINVAL); 155 } 156 poll_each_burst = val; 157 mtx_unlock(&poll_mtx); 158 159 return (0); 160 } 161 SYSCTL_PROC(_kern_polling, OID_AUTO, each_burst, 162 CTLTYPE_UINT | CTLFLAG_RW | CTLFLAG_MPSAFE, 0, sizeof(uint32_t), 163 poll_each_burst_sysctl, "I", 164 "Max size of each burst"); 165 166 static uint32_t poll_in_idle_loop=0; /* do we poll in idle loop ? */ 167 SYSCTL_UINT(_kern_polling, OID_AUTO, idle_poll, CTLFLAG_RW, 168 &poll_in_idle_loop, 0, "Enable device polling in idle loop"); 169 170 static uint32_t user_frac = 50; 171 static int user_frac_sysctl(SYSCTL_HANDLER_ARGS) 172 { 173 uint32_t val = user_frac; 174 int error; 175 176 error = sysctl_handle_int(oidp, &val, 0, req); 177 if (error || !req->newptr ) 178 return (error); 179 if (val > 99) 180 return (EINVAL); 181 182 mtx_lock(&poll_mtx); 183 user_frac = val; 184 mtx_unlock(&poll_mtx); 185 186 return (0); 187 } 188 SYSCTL_PROC(_kern_polling, OID_AUTO, user_frac, 189 CTLTYPE_UINT | CTLFLAG_RW | CTLFLAG_MPSAFE, 0, sizeof(uint32_t), 190 user_frac_sysctl, "I", 191 "Desired user fraction of cpu time"); 192 193 static uint32_t reg_frac_count = 0; 194 static uint32_t reg_frac = 20 ; 195 static int reg_frac_sysctl(SYSCTL_HANDLER_ARGS) 196 { 197 uint32_t val = reg_frac; 198 int error; 199 200 error = sysctl_handle_int(oidp, &val, 0, req); 201 if (error || !req->newptr ) 202 return (error); 203 if (val < 1 || val > hz) 204 return (EINVAL); 205 206 mtx_lock(&poll_mtx); 207 reg_frac = val; 208 if (reg_frac_count >= reg_frac) 209 reg_frac_count = 0; 210 mtx_unlock(&poll_mtx); 211 212 return (0); 213 } 214 SYSCTL_PROC(_kern_polling, OID_AUTO, reg_frac, 215 CTLTYPE_UINT | CTLFLAG_RW | CTLFLAG_MPSAFE, 0, sizeof(uint32_t), 216 reg_frac_sysctl, "I", 217 "Every this many cycles check registers"); 218 219 static uint32_t short_ticks; 220 SYSCTL_UINT(_kern_polling, OID_AUTO, short_ticks, CTLFLAG_RD, 221 &short_ticks, 0, "Hardclock ticks shorter than they should be"); 222 223 static uint32_t lost_polls; 224 SYSCTL_UINT(_kern_polling, OID_AUTO, lost_polls, CTLFLAG_RD, 225 &lost_polls, 0, "How many times we would have lost a poll tick"); 226 227 static uint32_t pending_polls; 228 SYSCTL_UINT(_kern_polling, OID_AUTO, pending_polls, CTLFLAG_RD, 229 &pending_polls, 0, "Do we need to poll again"); 230 231 static int residual_burst = 0; 232 SYSCTL_INT(_kern_polling, OID_AUTO, residual_burst, CTLFLAG_RD, 233 &residual_burst, 0, "# of residual cycles in burst"); 234 235 static uint32_t poll_handlers; /* next free entry in pr[]. */ 236 SYSCTL_UINT(_kern_polling, OID_AUTO, handlers, CTLFLAG_RD, 237 &poll_handlers, 0, "Number of registered poll handlers"); 238 239 static uint32_t phase; 240 SYSCTL_UINT(_kern_polling, OID_AUTO, phase, CTLFLAG_RD, 241 &phase, 0, "Polling phase"); 242 243 static uint32_t suspect; 244 SYSCTL_UINT(_kern_polling, OID_AUTO, suspect, CTLFLAG_RD, 245 &suspect, 0, "suspect event"); 246 247 static uint32_t stalled; 248 SYSCTL_UINT(_kern_polling, OID_AUTO, stalled, CTLFLAG_RD, 249 &stalled, 0, "potential stalls"); 250 251 static uint32_t idlepoll_sleeping; /* idlepoll is sleeping */ 252 SYSCTL_UINT(_kern_polling, OID_AUTO, idlepoll_sleeping, CTLFLAG_RD, 253 &idlepoll_sleeping, 0, "idlepoll is sleeping"); 254 255 #define POLL_LIST_LEN 128 256 struct pollrec { 257 poll_handler_t *handler; 258 struct ifnet *ifp; 259 }; 260 261 static struct pollrec pr[POLL_LIST_LEN]; 262 263 static void 264 poll_shutdown(void *arg, int howto) 265 { 266 267 poll_shutting_down = 1; 268 } 269 270 static void 271 init_device_poll(void) 272 { 273 274 mtx_init(&poll_mtx, "polling", NULL, MTX_DEF); 275 EVENTHANDLER_REGISTER(shutdown_post_sync, poll_shutdown, NULL, 276 SHUTDOWN_PRI_LAST); 277 } 278 SYSINIT(device_poll, SI_SUB_SOFTINTR, SI_ORDER_MIDDLE, init_device_poll, NULL); 279 280 /* 281 * Hook from hardclock. Tries to schedule a netisr, but keeps track 282 * of lost ticks due to the previous handler taking too long. 283 * Normally, this should not happen, because polling handler should 284 * run for a short time. However, in some cases (e.g. when there are 285 * changes in link status etc.) the drivers take a very long time 286 * (even in the order of milliseconds) to reset and reconfigure the 287 * device, causing apparent lost polls. 288 * 289 * The first part of the code is just for debugging purposes, and tries 290 * to count how often hardclock ticks are shorter than they should, 291 * meaning either stray interrupts or delayed events. 292 */ 293 void 294 hardclock_device_poll(void) 295 { 296 static struct timeval prev_t, t; 297 int delta; 298 299 if (poll_handlers == 0 || poll_shutting_down) 300 return; 301 302 microuptime(&t); 303 delta = (t.tv_usec - prev_t.tv_usec) + 304 (t.tv_sec - prev_t.tv_sec)*1000000; 305 if (delta * hz < 500000) 306 short_ticks++; 307 else 308 prev_t = t; 309 310 if (pending_polls > 100) { 311 /* 312 * Too much, assume it has stalled (not always true 313 * see comment above). 314 */ 315 stalled++; 316 pending_polls = 0; 317 phase = 0; 318 } 319 320 if (phase <= 2) { 321 if (phase != 0) 322 suspect++; 323 phase = 1; 324 netisr_poll_scheduled = 1; 325 netisr_pollmore_scheduled = 1; 326 netisr_sched_poll(); 327 phase = 2; 328 } 329 if (pending_polls++ > 0) 330 lost_polls++; 331 } 332 333 /* 334 * ether_poll is called from the idle loop. 335 */ 336 static void 337 ether_poll(int count) 338 { 339 struct epoch_tracker et; 340 int i; 341 342 mtx_lock(&poll_mtx); 343 344 if (count > poll_each_burst) 345 count = poll_each_burst; 346 347 NET_EPOCH_ENTER(et); 348 for (i = 0 ; i < poll_handlers ; i++) 349 pr[i].handler(pr[i].ifp, POLL_ONLY, count); 350 NET_EPOCH_EXIT(et); 351 352 mtx_unlock(&poll_mtx); 353 } 354 355 /* 356 * netisr_pollmore is called after other netisr's, possibly scheduling 357 * another NETISR_POLL call, or adapting the burst size for the next cycle. 358 * 359 * It is very bad to fetch large bursts of packets from a single card at once, 360 * because the burst could take a long time to be completely processed, or 361 * could saturate the intermediate queue (ipintrq or similar) leading to 362 * losses or unfairness. To reduce the problem, and also to account better for 363 * time spent in network-related processing, we split the burst in smaller 364 * chunks of fixed size, giving control to the other netisr's between chunks. 365 * This helps in improving the fairness, reducing livelock (because we 366 * emulate more closely the "process to completion" that we have with 367 * fastforwarding) and accounting for the work performed in low level 368 * handling and forwarding. 369 */ 370 371 static struct timeval poll_start_t; 372 373 void 374 netisr_pollmore(void) 375 { 376 struct timeval t; 377 int kern_load; 378 379 if (poll_handlers == 0) 380 return; 381 382 mtx_lock(&poll_mtx); 383 if (!netisr_pollmore_scheduled) { 384 mtx_unlock(&poll_mtx); 385 return; 386 } 387 netisr_pollmore_scheduled = 0; 388 phase = 5; 389 if (residual_burst > 0) { 390 netisr_poll_scheduled = 1; 391 netisr_pollmore_scheduled = 1; 392 netisr_sched_poll(); 393 mtx_unlock(&poll_mtx); 394 /* will run immediately on return, followed by netisrs */ 395 return; 396 } 397 /* here we can account time spent in netisr's in this tick */ 398 microuptime(&t); 399 kern_load = (t.tv_usec - poll_start_t.tv_usec) + 400 (t.tv_sec - poll_start_t.tv_sec)*1000000; /* us */ 401 kern_load = (kern_load * hz) / 10000; /* 0..100 */ 402 if (kern_load > (100 - user_frac)) { /* try decrease ticks */ 403 if (poll_burst > 1) 404 poll_burst--; 405 } else { 406 if (poll_burst < poll_burst_max) 407 poll_burst++; 408 } 409 410 pending_polls--; 411 if (pending_polls == 0) /* we are done */ 412 phase = 0; 413 else { 414 /* 415 * Last cycle was long and caused us to miss one or more 416 * hardclock ticks. Restart processing again, but slightly 417 * reduce the burst size to prevent that this happens again. 418 */ 419 poll_burst -= (poll_burst / 8); 420 if (poll_burst < 1) 421 poll_burst = 1; 422 netisr_poll_scheduled = 1; 423 netisr_pollmore_scheduled = 1; 424 netisr_sched_poll(); 425 phase = 6; 426 } 427 mtx_unlock(&poll_mtx); 428 } 429 430 /* 431 * netisr_poll is typically scheduled once per tick. 432 */ 433 void 434 netisr_poll(void) 435 { 436 int i, cycles; 437 enum poll_cmd arg = POLL_ONLY; 438 439 NET_EPOCH_ASSERT(); 440 441 if (poll_handlers == 0) 442 return; 443 444 mtx_lock(&poll_mtx); 445 if (!netisr_poll_scheduled) { 446 mtx_unlock(&poll_mtx); 447 return; 448 } 449 netisr_poll_scheduled = 0; 450 phase = 3; 451 if (residual_burst == 0) { /* first call in this tick */ 452 microuptime(&poll_start_t); 453 if (++reg_frac_count == reg_frac) { 454 arg = POLL_AND_CHECK_STATUS; 455 reg_frac_count = 0; 456 } 457 458 residual_burst = poll_burst; 459 } 460 cycles = (residual_burst < poll_each_burst) ? 461 residual_burst : poll_each_burst; 462 residual_burst -= cycles; 463 464 for (i = 0 ; i < poll_handlers ; i++) 465 pr[i].handler(pr[i].ifp, arg, cycles); 466 467 phase = 4; 468 mtx_unlock(&poll_mtx); 469 } 470 471 /* 472 * Try to register routine for polling. Returns 0 if successful 473 * (and polling should be enabled), error code otherwise. 474 * A device is not supposed to register itself multiple times. 475 * 476 * This is called from within the *_ioctl() functions. 477 */ 478 int 479 ether_poll_register(poll_handler_t *h, if_t ifp) 480 { 481 int i; 482 483 KASSERT(h != NULL, ("%s: handler is NULL", __func__)); 484 KASSERT(ifp != NULL, ("%s: ifp is NULL", __func__)); 485 486 mtx_lock(&poll_mtx); 487 if (poll_handlers >= POLL_LIST_LEN) { 488 /* 489 * List full, cannot register more entries. 490 * This should never happen; if it does, it is probably a 491 * broken driver trying to register multiple times. Checking 492 * this at runtime is expensive, and won't solve the problem 493 * anyways, so just report a few times and then give up. 494 */ 495 static int verbose = 10 ; 496 if (verbose >0) { 497 log(LOG_ERR, "poll handlers list full, " 498 "maybe a broken driver ?\n"); 499 verbose--; 500 } 501 mtx_unlock(&poll_mtx); 502 return (ENOMEM); /* no polling for you */ 503 } 504 505 for (i = 0 ; i < poll_handlers ; i++) 506 if (pr[i].ifp == ifp && pr[i].handler != NULL) { 507 mtx_unlock(&poll_mtx); 508 log(LOG_DEBUG, "ether_poll_register: %s: handler" 509 " already registered\n", ifp->if_xname); 510 return (EEXIST); 511 } 512 513 pr[poll_handlers].handler = h; 514 pr[poll_handlers].ifp = ifp; 515 poll_handlers++; 516 mtx_unlock(&poll_mtx); 517 if (idlepoll_sleeping) 518 wakeup(&idlepoll_sleeping); 519 return (0); 520 } 521 522 /* 523 * Remove interface from the polling list. Called from *_ioctl(), too. 524 */ 525 int 526 ether_poll_deregister(if_t ifp) 527 { 528 int i; 529 530 KASSERT(ifp != NULL, ("%s: ifp is NULL", __func__)); 531 532 mtx_lock(&poll_mtx); 533 534 for (i = 0 ; i < poll_handlers ; i++) 535 if (pr[i].ifp == ifp) /* found it */ 536 break; 537 if (i == poll_handlers) { 538 log(LOG_DEBUG, "ether_poll_deregister: %s: not found!\n", 539 ifp->if_xname); 540 mtx_unlock(&poll_mtx); 541 return (ENOENT); 542 } 543 poll_handlers--; 544 if (i < poll_handlers) { /* Last entry replaces this one. */ 545 pr[i].handler = pr[poll_handlers].handler; 546 pr[i].ifp = pr[poll_handlers].ifp; 547 } 548 mtx_unlock(&poll_mtx); 549 return (0); 550 } 551 552 static void 553 poll_idle(void) 554 { 555 struct thread *td = curthread; 556 struct rtprio rtp; 557 558 rtp.prio = RTP_PRIO_MAX; /* lowest priority */ 559 rtp.type = RTP_PRIO_IDLE; 560 PROC_SLOCK(td->td_proc); 561 rtp_to_pri(&rtp, td); 562 PROC_SUNLOCK(td->td_proc); 563 564 for (;;) { 565 if (poll_in_idle_loop && poll_handlers > 0) { 566 idlepoll_sleeping = 0; 567 ether_poll(poll_each_burst); 568 thread_lock(td); 569 mi_switch(SW_VOL); 570 } else { 571 idlepoll_sleeping = 1; 572 tsleep(&idlepoll_sleeping, 0, "pollid", hz * 3); 573 } 574 } 575 } 576 577 static struct proc *idlepoll; 578 static struct kproc_desc idlepoll_kp = { 579 "idlepoll", 580 poll_idle, 581 &idlepoll 582 }; 583 SYSINIT(idlepoll, SI_SUB_KTHREAD_VM, SI_ORDER_ANY, kproc_start, 584 &idlepoll_kp); 585