1 /* 2 * Copyright (c) 1994 John S. Dyson 3 * All rights reserved. 4 * 5 * Redistribution and use in source and binary forms, with or without 6 * modification, are permitted provided that the following conditions 7 * are met: 8 * 1. Redistributions of source code must retain the above copyright 9 * notice immediately at the beginning of the file, without modification, 10 * this list of conditions, and the following disclaimer. 11 * 2. Redistributions in binary form must reproduce the above copyright 12 * notice, this list of conditions and the following disclaimer in the 13 * documentation and/or other materials provided with the distribution. 14 * 3. Absolutely no warranty of function or purpose is made by the author 15 * John S. Dyson. 16 * 4. Modifications may be freely made to this file if the above conditions 17 * are met. 18 * 19 * $FreeBSD$ 20 */ 21 22 #include <sys/param.h> 23 #include <sys/systm.h> 24 #include <sys/bio.h> 25 #include <sys/buf.h> 26 #include <sys/conf.h> 27 #include <sys/proc.h> 28 #include <sys/uio.h> 29 30 #include <vm/vm.h> 31 #include <vm/vm_extern.h> 32 33 int 34 physio(dev_t dev, struct uio *uio, int ioflag) 35 { 36 int i; 37 int error; 38 int spl; 39 caddr_t sa; 40 u_int iolen; 41 struct buf *bp; 42 43 /* Keep the process UPAGES from being swapped. XXX: why ? */ 44 PHOLD(curproc); 45 46 bp = getpbuf(NULL); 47 sa = bp->b_data; 48 error = bp->b_error = 0; 49 50 /* XXX: sanity check */ 51 if(dev->si_iosize_max < PAGE_SIZE) { 52 printf("WARNING: %s si_iosize_max=%d, using DFLTPHYS.\n", 53 devtoname(dev), dev->si_iosize_max); 54 dev->si_iosize_max = DFLTPHYS; 55 } 56 57 for (i = 0; i < uio->uio_iovcnt; i++) { 58 while (uio->uio_iov[i].iov_len) { 59 bp->b_flags = B_PHYS; 60 if (uio->uio_rw == UIO_READ) 61 bp->b_iocmd = BIO_READ; 62 else 63 bp->b_iocmd = BIO_WRITE; 64 bp->b_dev = dev; 65 bp->b_iodone = bdone; 66 bp->b_data = uio->uio_iov[i].iov_base; 67 bp->b_bcount = uio->uio_iov[i].iov_len; 68 bp->b_offset = uio->uio_offset; 69 bp->b_saveaddr = sa; 70 71 /* Don't exceed drivers iosize limit */ 72 if (bp->b_bcount > dev->si_iosize_max) 73 bp->b_bcount = dev->si_iosize_max; 74 75 /* 76 * Make sure the pbuf can map the request 77 * XXX: The pbuf has kvasize = MAXPHYS so a request 78 * XXX: larger than MAXPHYS - PAGE_SIZE must be 79 * XXX: page aligned or it will be fragmented. 80 */ 81 iolen = ((vm_offset_t) bp->b_data) & PAGE_MASK; 82 if ((bp->b_bcount + iolen) > bp->b_kvasize) { 83 bp->b_bcount = bp->b_kvasize; 84 if (iolen != 0) 85 bp->b_bcount -= PAGE_SIZE; 86 } 87 bp->b_bufsize = bp->b_bcount; 88 89 bp->b_blkno = btodb(bp->b_offset); 90 91 if (uio->uio_segflg == UIO_USERSPACE) { 92 /* 93 * Note that useracc() alone is not a 94 * sufficient test. vmapbuf() can still fail 95 * due to a smaller file mapped into a larger 96 * area of VM, or if userland races against 97 * vmapbuf() after the useracc() check. 98 */ 99 if (!useracc(bp->b_data, bp->b_bufsize, 100 bp->b_iocmd == BIO_READ ? 101 VM_PROT_WRITE : VM_PROT_READ)) { 102 error = EFAULT; 103 goto doerror; 104 } 105 if (vmapbuf(bp) < 0) { 106 error = EFAULT; 107 goto doerror; 108 } 109 } 110 111 DEV_STRATEGY(bp); 112 spl = splbio(); 113 if (uio->uio_rw == UIO_READ) 114 bwait(bp, PRIBIO, "physrd"); 115 else 116 bwait(bp, PRIBIO, "physwr"); 117 splx(spl); 118 119 if (uio->uio_segflg == UIO_USERSPACE) 120 vunmapbuf(bp); 121 iolen = bp->b_bcount - bp->b_resid; 122 if (iolen == 0 && !(bp->b_ioflags & BIO_ERROR)) 123 goto doerror; /* EOF */ 124 uio->uio_iov[i].iov_len -= iolen; 125 uio->uio_iov[i].iov_base = 126 (char *)uio->uio_iov[i].iov_base + iolen; 127 uio->uio_resid -= iolen; 128 uio->uio_offset += iolen; 129 if( bp->b_ioflags & BIO_ERROR) { 130 error = bp->b_error; 131 goto doerror; 132 } 133 } 134 } 135 doerror: 136 relpbuf(bp, NULL); 137 PRELE(curproc); 138 return (error); 139 } 140