1#- 2# Copyright (c) 1998-2004 Doug Rabson 3# All rights reserved. 4# 5# Redistribution and use in source and binary forms, with or without 6# modification, are permitted provided that the following conditions 7# are met: 8# 1. Redistributions of source code must retain the above copyright 9# notice, this list of conditions and the following disclaimer. 10# 2. Redistributions in binary form must reproduce the above copyright 11# notice, this list of conditions and the following disclaimer in the 12# documentation and/or other materials provided with the distribution. 13# 14# THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND 15# ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE 16# IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE 17# ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE 18# FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL 19# DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS 20# OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) 21# HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT 22# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY 23# OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF 24# SUCH DAMAGE. 25# 26# $FreeBSD$ 27# 28 29#include <sys/bus.h> 30 31/** 32 * @defgroup DEVICE device - KObj methods for all device drivers 33 * @brief A basic set of methods required for all device drivers. 34 * 35 * The device interface is used to match devices to drivers during 36 * autoconfiguration and provides methods to allow drivers to handle 37 * system-wide events such as suspend, resume or shutdown. 38 * @{ 39 */ 40INTERFACE device; 41 42# 43# Default implementations of some methods. 44# 45CODE { 46 static int null_shutdown(device_t dev) 47 { 48 return 0; 49 } 50 51 static int null_suspend(device_t dev) 52 { 53 return 0; 54 } 55 56 static int null_resume(device_t dev) 57 { 58 return 0; 59 } 60 61 static int null_quiesce(device_t dev) 62 { 63 return 0; 64 } 65}; 66 67/** 68 * @brief Probe to see if a device matches a driver. 69 * 70 * Users should not call this method directly. Normally, this 71 * is called via device_probe_and_attach() to select a driver 72 * calling the DEVICE_PROBE() of all candidate drivers and attach 73 * the winning driver (if any) to the device. 74 * 75 * This function is used to match devices to device drivers. 76 * Typically, the driver will examine the device to see if 77 * it is suitable for this driver. This might include checking 78 * the values of various device instance variables or reading 79 * hardware registers. 80 * 81 * In some cases, there may be more than one driver available 82 * which can be used for a device (for instance there might 83 * be a generic driver which works for a set of many types of 84 * device and a more specific driver which works for a subset 85 * of devices). Because of this, a driver should not assume 86 * that it will be the driver that attaches to the device even 87 * if it returns a success status from DEVICE_PROBE(). In particular, 88 * a driver must free any resources which it allocated during 89 * the probe before returning. The return value of DEVICE_PROBE() 90 * is used to elect which driver is used - the driver which returns 91 * the largest non-error value wins the election and attaches to 92 * the device. Common non-error values are described in the 93 * DEVICE_PROBE(9) manual page. 94 * 95 * If a driver matches the hardware, it should set the device 96 * description string using device_set_desc() or 97 * device_set_desc_copy(). This string is used to generate an 98 * informative message when DEVICE_ATTACH() is called. 99 * 100 * As a special case, if a driver returns zero, the driver election 101 * is cut short and that driver will attach to the device 102 * immediately. This should rarely be used. 103 * 104 * For example, a probe method for a PCI device driver might look 105 * like this: 106 * 107 * @code 108 * int 109 * foo_probe(device_t dev) 110 * { 111 * if (pci_get_vendor(dev) == FOOVENDOR && 112 * pci_get_device(dev) == FOODEVICE) { 113 * device_set_desc(dev, "Foo device"); 114 * return (BUS_PROBE_DEFAULT); 115 * } 116 * return (ENXIO); 117 * } 118 * @endcode 119 * 120 * To include this method in a device driver, use a line like this 121 * in the driver's method list: 122 * 123 * @code 124 * KOBJMETHOD(device_probe, foo_probe) 125 * @endcode 126 * 127 * @param dev the device to probe 128 * 129 * @retval 0 if this is the only possible driver for this 130 * device 131 * @retval negative if the driver can match this device - the 132 * least negative value is used to select the 133 * driver 134 * @retval ENXIO if the driver does not match the device 135 * @retval positive if some kind of error was detected during 136 * the probe, a regular unix error code should 137 * be returned to indicate the type of error 138 * @see DEVICE_ATTACH(), pci_get_vendor(), pci_get_device() 139 */ 140METHOD int probe { 141 device_t dev; 142}; 143 144/** 145 * @brief Allow a device driver to detect devices not otherwise enumerated. 146 * 147 * The DEVICE_IDENTIFY() method is used by some drivers (e.g. the ISA 148 * bus driver) to help populate the bus device with a useful set of 149 * child devices, normally by calling the BUS_ADD_CHILD() method of 150 * the parent device. For instance, the ISA bus driver uses several 151 * special drivers, including the isahint driver and the pnp driver to 152 * create child devices based on configuration hints and PnP bus 153 * probes respectively. 154 * 155 * Many bus drivers which support true plug-and-play do not need to 156 * use this method at all since child devices can be discovered 157 * automatically without help from child drivers. 158 * 159 * To include this method in a device driver, use a line like this 160 * in the driver's method list: 161 * 162 * @code 163 * KOBJMETHOD(device_identify, foo_identify) 164 * @endcode 165 * 166 * @param driver the driver whose identify method is being called 167 * @param parent the parent device to use when adding new children 168 */ 169STATICMETHOD void identify { 170 driver_t *driver; 171 device_t parent; 172}; 173 174/** 175 * @brief Attach a device to a device driver 176 * 177 * Normally only called via device_probe_and_attach(), this is called 178 * when a driver has succeeded in probing against a device. 179 * This method should initialise the hardware and allocate other 180 * system resources (e.g. devfs entries) as required. 181 * 182 * To include this method in a device driver, use a line like this 183 * in the driver's method list: 184 * 185 * @code 186 * KOBJMETHOD(device_attach, foo_attach) 187 * @endcode 188 * 189 * @param dev the device to probe 190 * 191 * @retval 0 success 192 * @retval non-zero if some kind of error was detected during 193 * the attach, a regular unix error code should 194 * be returned to indicate the type of error 195 * @see DEVICE_PROBE() 196 */ 197METHOD int attach { 198 device_t dev; 199}; 200 201/** 202 * @brief Detach a driver from a device. 203 * 204 * This can be called if the user is replacing the 205 * driver software or if a device is about to be physically removed 206 * from the system (e.g. for removable hardware such as USB or PCCARD). 207 * 208 * To include this method in a device driver, use a line like this 209 * in the driver's method list: 210 * 211 * @code 212 * KOBJMETHOD(device_detach, foo_detach) 213 * @endcode 214 * 215 * @param dev the device to detach 216 * 217 * @retval 0 success 218 * @retval non-zero the detach could not be performed, e.g. if the 219 * driver does not support detaching. 220 * 221 * @see DEVICE_ATTACH() 222 */ 223METHOD int detach { 224 device_t dev; 225}; 226 227/** 228 * @brief Called during system shutdown. 229 * 230 * This method allows drivers to detect when the system is being shut down. 231 * Some drivers need to use this to place their hardware in a consistent 232 * state before rebooting the computer. 233 * 234 * To include this method in a device driver, use a line like this 235 * in the driver's method list: 236 * 237 * @code 238 * KOBJMETHOD(device_shutdown, foo_shutdown) 239 * @endcode 240 */ 241METHOD int shutdown { 242 device_t dev; 243} DEFAULT null_shutdown; 244 245/** 246 * @brief This is called by the power-management subsystem when a 247 * suspend has been requested by the user or by some automatic 248 * mechanism. 249 * 250 * This gives drivers a chance to veto the suspend or save their 251 * configuration before power is removed. 252 * 253 * To include this method in a device driver, use a line like this in 254 * the driver's method list: 255 * 256 * @code 257 * KOBJMETHOD(device_suspend, foo_suspend) 258 * @endcode 259 * 260 * @param dev the device being suspended 261 * 262 * @retval 0 success 263 * @retval non-zero an error occurred while attempting to prepare the 264 * device for suspension 265 * 266 * @see DEVICE_RESUME() 267 */ 268METHOD int suspend { 269 device_t dev; 270} DEFAULT null_suspend; 271 272/** 273 * @brief This is called when the system resumes after a suspend. 274 * 275 * To include this method in a device driver, use a line like this 276 * in the driver's method list: 277 * 278 * @code 279 * KOBJMETHOD(device_resume, foo_resume) 280 * @endcode 281 * 282 * @param dev the device being resumed 283 * 284 * @retval 0 success 285 * @retval non-zero an error occurred while attempting to restore the 286 * device from suspension 287 * 288 * @see DEVICE_SUSPEND() 289 */ 290METHOD int resume { 291 device_t dev; 292} DEFAULT null_resume; 293 294/** 295 * @brief This is called when the driver is asked to quiesce itself. 296 * 297 * The driver should arrange for the orderly shutdown of this device. 298 * All further access to the device should be curtailed. Soon there 299 * will be a request to detach, but there won't necessarily be one. 300 * 301 * To include this method in a device driver, use a line like this 302 * in the driver's method list: 303 * 304 * @code 305 * KOBJMETHOD(device_quiesce, foo_quiesce) 306 * @endcode 307 * 308 * @param dev the device being quiesced 309 * 310 * @retval 0 success 311 * @retval non-zero an error occurred while attempting to quiesce the 312 * device 313 * 314 * @see DEVICE_DETACH() 315 */ 316METHOD int quiesce { 317 device_t dev; 318} DEFAULT null_quiesce; 319