xref: /freebsd/sys/i386/include/specialreg.h (revision 3ff369fed2a08f32dda232c10470b949bef9489f)
1 /*-
2  * Copyright (c) 1991 The Regents of the University of California.
3  * All rights reserved.
4  *
5  * Redistribution and use in source and binary forms, with or without
6  * modification, are permitted provided that the following conditions
7  * are met:
8  * 1. Redistributions of source code must retain the above copyright
9  *    notice, this list of conditions and the following disclaimer.
10  * 2. Redistributions in binary form must reproduce the above copyright
11  *    notice, this list of conditions and the following disclaimer in the
12  *    documentation and/or other materials provided with the distribution.
13  * 3. All advertising materials mentioning features or use of this software
14  *    must display the following acknowledgement:
15  *	This product includes software developed by the University of
16  *	California, Berkeley and its contributors.
17  * 4. Neither the name of the University nor the names of its contributors
18  *    may be used to endorse or promote products derived from this software
19  *    without specific prior written permission.
20  *
21  * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
22  * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
23  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
24  * ARE DISCLAIMED.  IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
25  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
26  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
27  * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
28  * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
29  * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
30  * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
31  * SUCH DAMAGE.
32  *
33  *	from: @(#)specialreg.h	7.1 (Berkeley) 5/9/91
34  * $FreeBSD$
35  */
36 
37 #ifndef _MACHINE_SPECIALREG_H_
38 #define	_MACHINE_SPECIALREG_H_
39 
40 /*
41  * Bits in 386 special registers:
42  */
43 #define	CR0_PE	0x00000001	/* Protected mode Enable */
44 #define	CR0_MP	0x00000002	/* "Math" Present (NPX or NPX emulator) */
45 #define	CR0_EM	0x00000004	/* EMulate non-NPX coproc. (trap ESC only) */
46 #define	CR0_TS	0x00000008	/* Task Switched (if MP, trap ESC and WAIT) */
47 #ifdef notused
48 #define	CR0_ET	0x00000010	/* Extension Type (387 (if set) vs 287) */
49 #endif
50 #define	CR0_PG	0x80000000	/* PaGing enable */
51 
52 /*
53  * Bits in 486 special registers:
54  */
55 #define	CR0_NE	0x00000020	/* Numeric Error enable (EX16 vs IRQ13) */
56 #define	CR0_WP	0x00010000	/* Write Protect (honor page protect in
57 							   all modes) */
58 #define	CR0_AM	0x00040000	/* Alignment Mask (set to enable AC flag) */
59 #define	CR0_NW  0x20000000	/* Not Write-through */
60 #define	CR0_CD  0x40000000	/* Cache Disable */
61 
62 /*
63  * Bits in PPro special registers
64  */
65 #define	CR4_VME	0x00000001	/* Virtual 8086 mode extensions */
66 #define	CR4_PVI	0x00000002	/* Protected-mode virtual interrupts */
67 #define	CR4_TSD	0x00000004	/* Time stamp disable */
68 #define	CR4_DE	0x00000008	/* Debugging extensions */
69 #define	CR4_PSE	0x00000010	/* Page size extensions */
70 #define	CR4_PAE	0x00000020	/* Physical address extension */
71 #define	CR4_MCE	0x00000040	/* Machine check enable */
72 #define	CR4_PGE	0x00000080	/* Page global enable */
73 #define	CR4_PCE	0x00000100	/* Performance monitoring counter enable */
74 #define	CR4_FXSR 0x00000200	/* Fast FPU save/restore used by OS */
75 #define	CR4_XMM	0x00000400	/* enable SIMD/MMX2 to use except 16 */
76 
77 /*
78  * CPUID instruction features register
79  */
80 #define	CPUID_FPU	0x0001
81 #define	CPUID_VME	0x0002
82 #define	CPUID_DE	0x0004
83 #define	CPUID_PSE	0x0008
84 #define	CPUID_TSC	0x0010
85 #define	CPUID_MSR	0x0020
86 #define	CPUID_PAE	0x0040
87 #define	CPUID_MCE	0x0080
88 #define	CPUID_CX8	0x0100
89 #define	CPUID_APIC	0x0200
90 #define	CPUID_B10	0x0400
91 #define	CPUID_B11	0x0800
92 #define	CPUID_MTRR	0x1000
93 #define	CPUID_PGE	0x2000
94 #define	CPUID_MCA	0x4000
95 #define	CPUID_CMOV	0x8000
96 #define	CPUID_FXSR  0x01000000
97 #define	CPUID_XMM   0x02000000
98 
99 /*
100  * Model-specific registers for the i386 family
101  */
102 #define MSR_P5_MC_ADDR		0x000
103 #define MSR_P5_MC_TYPE		0x001
104 #define MSR_TSC			0x010
105 #define MSR_APICBASE		0x01b
106 #define MSR_EBL_CR_POWERON	0x02a
107 #define MSR_BIOS_UPDT_TRIG	0x079
108 #define MSR_BIOS_SIGN		0x08b
109 #define MSR_PERFCTR0		0x0c1
110 #define MSR_PERFCTR1		0x0c2
111 #define MSR_MTRRcap		0x0fe
112 #define MSR_MCG_CAP		0x179
113 #define MSR_MCG_STATUS		0x17a
114 #define MSR_MCG_CTL		0x17b
115 #define MSR_EVNTSEL0		0x186
116 #define MSR_EVNTSEL1		0x187
117 #define MSR_DEBUGCTLMSR		0x1d9
118 #define MSR_LASTBRANCHFROMIP	0x1db
119 #define MSR_LASTBRANCHTOIP	0x1dc
120 #define MSR_LASTINTFROMIP	0x1dd
121 #define MSR_LASTINTTOIP		0x1de
122 #define MSR_ROB_CR_BKUPTMPDR6	0x1e0
123 #define MSR_MTRRVarBase		0x200
124 #define MSR_MTRR64kBase		0x250
125 #define MSR_MTRR16kBase		0x258
126 #define MSR_MTRR4kBase		0x268
127 #define MSR_MTRRdefType		0x2ff
128 #define MSR_MC0_CTL		0x400
129 #define MSR_MC0_STATUS		0x401
130 #define MSR_MC0_ADDR		0x402
131 #define MSR_MC0_MISC		0x403
132 #define MSR_MC1_CTL		0x404
133 #define MSR_MC1_STATUS		0x405
134 #define MSR_MC1_ADDR		0x406
135 #define MSR_MC1_MISC		0x407
136 #define MSR_MC2_CTL		0x408
137 #define MSR_MC2_STATUS		0x409
138 #define MSR_MC2_ADDR		0x40a
139 #define MSR_MC2_MISC		0x40b
140 #define MSR_MC4_CTL		0x40c
141 #define MSR_MC4_STATUS		0x40d
142 #define MSR_MC4_ADDR		0x40e
143 #define MSR_MC4_MISC		0x40f
144 #define MSR_MC3_CTL		0x410
145 #define MSR_MC3_STATUS		0x411
146 #define MSR_MC3_ADDR		0x412
147 #define MSR_MC3_MISC		0x413
148 
149 /*
150  * Constants related to MTRRs
151  */
152 #define MTRR_N64K		8	/* numbers of fixed-size entries */
153 #define MTRR_N16K		16
154 #define MTRR_N4K		64
155 
156 /*
157  * Cyrix configuration registers, accessible as IO ports.
158  */
159 #define	CCR0			0xc0	/* Configuration control register 0 */
160 #define	CCR0_NC0		0x01	/* First 64K of each 1M memory region is
161 								   non-cacheable */
162 #define	CCR0_NC1		0x02	/* 640K-1M region is non-cacheable */
163 #define	CCR0_A20M		0x04	/* Enables A20M# input pin */
164 #define	CCR0_KEN		0x08	/* Enables KEN# input pin */
165 #define	CCR0_FLUSH		0x10	/* Enables FLUSH# input pin */
166 #define	CCR0_BARB		0x20	/* Flushes internal cache when entering hold
167 								   state */
168 #define	CCR0_CO			0x40	/* Cache org: 1=direct mapped, 0=2x set
169 								   assoc */
170 #define	CCR0_SUSPEND	0x80	/* Enables SUSP# and SUSPA# pins */
171 
172 #define	CCR1			0xc1	/* Configuration control register 1 */
173 #define	CCR1_RPL		0x01	/* Enables RPLSET and RPLVAL# pins */
174 #define	CCR1_SMI		0x02	/* Enables SMM pins */
175 #define	CCR1_SMAC		0x04	/* System management memory access */
176 #define	CCR1_MMAC		0x08	/* Main memory access */
177 #define	CCR1_NO_LOCK	0x10	/* Negate LOCK# */
178 #define	CCR1_SM3		0x80	/* SMM address space address region 3 */
179 
180 #define	CCR2			0xc2
181 #define	CCR2_WB			0x02	/* Enables WB cache interface pins */
182 #define	CCR2_SADS		0x02	/* Slow ADS */
183 #define	CCR2_LOCK_NW	0x04	/* LOCK NW Bit */
184 #define	CCR2_SUSP_HLT	0x08	/* Suspend on HALT */
185 #define	CCR2_WT1		0x10	/* WT region 1 */
186 #define	CCR2_WPR1		0x10	/* Write-protect region 1 */
187 #define CCR2_BARB		0x20	/* Flushes write-back cache when entering
188 								   hold state. */
189 #define	CCR2_BWRT		0x40	/* Enables burst write cycles */
190 #define	CCR2_USE_SUSP	0x80	/* Enables suspend pins */
191 
192 #define	CCR3			0xc3
193 #define	CCR3_SMILOCK	0x01	/* SMM register lock */
194 #define	CCR3_NMI		0x02	/* Enables NMI during SMM */
195 #define	CCR3_LINBRST	0x04	/* Linear address burst cycles */
196 #define	CCR3_SMMMODE	0x08	/* SMM Mode */
197 #define	CCR3_MAPEN0		0x10	/* Enables Map0 */
198 #define	CCR3_MAPEN1		0x20	/* Enables Map1 */
199 #define	CCR3_MAPEN2		0x40	/* Enables Map2 */
200 #define	CCR3_MAPEN3		0x80	/* Enables Map3 */
201 
202 #define	CCR4			0xe8
203 #define	CCR4_IOMASK		0x07
204 #define	CCR4_MEM		0x08	/* Enables momory bypassing */
205 #define	CCR4_DTE		0x10	/* Enables directory table entry cache */
206 #define	CCR4_FASTFPE	0x20	/* Fast FPU exception */
207 #define	CCR4_CPUID		0x80	/* Enables CPUID instruction */
208 
209 #define	CCR5			0xe9
210 #define	CCR5_WT_ALLOC	0x01	/* Write-through allocate */
211 #define	CCR5_SLOP		0x02	/* LOOP instruction slowed down */
212 #define	CCR5_LBR1		0x10	/* Local bus region 1 */
213 #define	CCR5_ARREN		0x20	/* Enables ARR region */
214 
215 #define	CCR6			0xea
216 
217 #define	CCR7			0xeb
218 
219 /* Performance Control Register (5x86 only). */
220 #define	PCR0			0x20
221 #define	PCR0_RSTK		0x01	/* Enables return stack */
222 #define	PCR0_BTB		0x02	/* Enables branch target buffer */
223 #define	PCR0_LOOP		0x04	/* Enables loop */
224 #define	PCR0_AIS		0x08	/* Enables all instrcutions stalled to
225 								   serialize pipe. */
226 #define	PCR0_MLR		0x10	/* Enables reordering of misaligned loads */
227 #define	PCR0_BTBRT		0x40	/* Enables BTB test register. */
228 #define	PCR0_LSSER		0x80	/* Disable reorder */
229 
230 /* Device Identification Registers */
231 #define	DIR0			0xfe
232 #define	DIR1			0xff
233 
234 /*
235  * The following four 3-byte registers control the non-cacheable regions.
236  * These registers must be written as three separate bytes.
237  *
238  * NCRx+0: A31-A24 of starting address
239  * NCRx+1: A23-A16 of starting address
240  * NCRx+2: A15-A12 of starting address | NCR_SIZE_xx.
241  *
242  * The non-cacheable region's starting address must be aligned to the
243  * size indicated by the NCR_SIZE_xx field.
244  */
245 #define	NCR1	0xc4
246 #define	NCR2	0xc7
247 #define	NCR3	0xca
248 #define	NCR4	0xcd
249 
250 #define	NCR_SIZE_0K	0
251 #define	NCR_SIZE_4K	1
252 #define	NCR_SIZE_8K	2
253 #define	NCR_SIZE_16K	3
254 #define	NCR_SIZE_32K	4
255 #define	NCR_SIZE_64K	5
256 #define	NCR_SIZE_128K	6
257 #define	NCR_SIZE_256K	7
258 #define	NCR_SIZE_512K	8
259 #define	NCR_SIZE_1M	9
260 #define	NCR_SIZE_2M	10
261 #define	NCR_SIZE_4M	11
262 #define	NCR_SIZE_8M	12
263 #define	NCR_SIZE_16M	13
264 #define	NCR_SIZE_32M	14
265 #define	NCR_SIZE_4G	15
266 
267 /*
268  * The address region registers are used to specify the location and
269  * size for the eight address regions.
270  *
271  * ARRx + 0: A31-A24 of start address
272  * ARRx + 1: A23-A16 of start address
273  * ARRx + 2: A15-A12 of start address | ARR_SIZE_xx
274  */
275 #define	ARR0	0xc4
276 #define	ARR1	0xc7
277 #define	ARR2	0xca
278 #define	ARR3	0xcd
279 #define	ARR4	0xd0
280 #define	ARR5	0xd3
281 #define	ARR6	0xd6
282 #define	ARR7	0xd9
283 
284 #define	ARR_SIZE_0K		0
285 #define	ARR_SIZE_4K		1
286 #define	ARR_SIZE_8K		2
287 #define	ARR_SIZE_16K	3
288 #define	ARR_SIZE_32K	4
289 #define	ARR_SIZE_64K	5
290 #define	ARR_SIZE_128K	6
291 #define	ARR_SIZE_256K	7
292 #define	ARR_SIZE_512K	8
293 #define	ARR_SIZE_1M		9
294 #define	ARR_SIZE_2M		10
295 #define	ARR_SIZE_4M		11
296 #define	ARR_SIZE_8M		12
297 #define	ARR_SIZE_16M	13
298 #define	ARR_SIZE_32M	14
299 #define	ARR_SIZE_4G		15
300 
301 /*
302  * The region control registers specify the attributes associated with
303  * the ARRx addres regions.
304  */
305 #define	RCR0	0xdc
306 #define	RCR1	0xdd
307 #define	RCR2	0xde
308 #define	RCR3	0xdf
309 #define	RCR4	0xe0
310 #define	RCR5	0xe1
311 #define	RCR6	0xe2
312 #define	RCR7	0xe3
313 
314 #define RCR_RCD	0x01	/* Disables caching for ARRx (x = 0-6). */
315 #define RCR_RCE	0x01	/* Enables caching for ARR7. */
316 #define RCR_WWO	0x02	/* Weak write ordering. */
317 #define	RCR_WL	0x04	/* Weak locking. */
318 #define RCR_WG	0x08	/* Write gathering. */
319 #define	RCR_WT	0x10	/* Write-through. */
320 #define	RCR_NLB	0x20	/* LBA# pin is not asserted. */
321 
322 /* AMD Write Allocate Top-Of-Memory and Control Register */
323 #define	AMD_WT_ALLOC_TME	0x40000	/* top-of-memory enable */
324 #define	AMD_WT_ALLOC_PRE	0x20000	/* programmable range enable */
325 #define	AMD_WT_ALLOC_FRE	0x10000	/* fixed (A0000-FFFFF) range enable */
326 
327 
328 #ifndef LOCORE
329 static __inline u_char
330 read_cyrix_reg(u_char reg)
331 {
332 	outb(0x22, reg);
333 	return inb(0x23);
334 }
335 
336 static __inline void
337 write_cyrix_reg(u_char reg, u_char data)
338 {
339 	outb(0x22, reg);
340 	outb(0x23, data);
341 }
342 #endif
343 
344 #endif /* !_MACHINE_SPECIALREG_H_ */
345