1 /*- 2 * Copyright (c) 1982, 1986 The Regents of the University of California. 3 * Copyright (c) 1989, 1990 William Jolitz 4 * Copyright (c) 1994 John Dyson 5 * All rights reserved. 6 * 7 * This code is derived from software contributed to Berkeley by 8 * the Systems Programming Group of the University of Utah Computer 9 * Science Department, and William Jolitz. 10 * 11 * Redistribution and use in source and binary forms, with or without 12 * modification, are permitted provided that the following conditions 13 * are met: 14 * 1. Redistributions of source code must retain the above copyright 15 * notice, this list of conditions and the following disclaimer. 16 * 2. Redistributions in binary form must reproduce the above copyright 17 * notice, this list of conditions and the following disclaimer in the 18 * documentation and/or other materials provided with the distribution. 19 * 3. All advertising materials mentioning features or use of this software 20 * must display the following acknowledgement: 21 * This product includes software developed by the University of 22 * California, Berkeley and its contributors. 23 * 4. Neither the name of the University nor the names of its contributors 24 * may be used to endorse or promote products derived from this software 25 * without specific prior written permission. 26 * 27 * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND 28 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE 29 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE 30 * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE 31 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL 32 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS 33 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) 34 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT 35 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY 36 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF 37 * SUCH DAMAGE. 38 * 39 * from: @(#)vm_machdep.c 7.3 (Berkeley) 5/13/91 40 * Utah $Hdr: vm_machdep.c 1.16.1.1 89/06/23$ 41 */ 42 43 #include <sys/cdefs.h> 44 __FBSDID("$FreeBSD$"); 45 46 #include "opt_isa.h" 47 #include "opt_npx.h" 48 #include "opt_reset.h" 49 #include "opt_cpu.h" 50 #include "opt_xbox.h" 51 52 #include <sys/param.h> 53 #include <sys/systm.h> 54 #include <sys/bio.h> 55 #include <sys/buf.h> 56 #include <sys/kernel.h> 57 #include <sys/ktr.h> 58 #include <sys/lock.h> 59 #include <sys/malloc.h> 60 #include <sys/mbuf.h> 61 #include <sys/mutex.h> 62 #include <sys/pioctl.h> 63 #include <sys/proc.h> 64 #include <sys/sf_buf.h> 65 #include <sys/smp.h> 66 #include <sys/sched.h> 67 #include <sys/sysctl.h> 68 #include <sys/unistd.h> 69 #include <sys/vnode.h> 70 #include <sys/vmmeter.h> 71 72 #include <machine/cpu.h> 73 #include <machine/cputypes.h> 74 #include <machine/md_var.h> 75 #include <machine/pcb.h> 76 #include <machine/pcb_ext.h> 77 #include <machine/smp.h> 78 #include <machine/vm86.h> 79 80 #ifdef CPU_ELAN 81 #include <machine/elan_mmcr.h> 82 #endif 83 84 #include <vm/vm.h> 85 #include <vm/vm_extern.h> 86 #include <vm/vm_kern.h> 87 #include <vm/vm_page.h> 88 #include <vm/vm_map.h> 89 #include <vm/vm_param.h> 90 91 #ifdef XEN 92 #include <xen/hypervisor.h> 93 #endif 94 #ifdef PC98 95 #include <pc98/cbus/cbus.h> 96 #else 97 #include <i386/isa/isa.h> 98 #endif 99 100 #ifdef XBOX 101 #include <machine/xbox.h> 102 #endif 103 104 #ifndef NSFBUFS 105 #define NSFBUFS (512 + maxusers * 16) 106 #endif 107 108 static void cpu_reset_real(void); 109 #ifdef SMP 110 static void cpu_reset_proxy(void); 111 static u_int cpu_reset_proxyid; 112 static volatile u_int cpu_reset_proxy_active; 113 #endif 114 static void sf_buf_init(void *arg); 115 SYSINIT(sock_sf, SI_SUB_MBUF, SI_ORDER_ANY, sf_buf_init, NULL); 116 117 LIST_HEAD(sf_head, sf_buf); 118 119 /* 120 * A hash table of active sendfile(2) buffers 121 */ 122 static struct sf_head *sf_buf_active; 123 static u_long sf_buf_hashmask; 124 125 #define SF_BUF_HASH(m) (((m) - vm_page_array) & sf_buf_hashmask) 126 127 static TAILQ_HEAD(, sf_buf) sf_buf_freelist; 128 static u_int sf_buf_alloc_want; 129 130 /* 131 * A lock used to synchronize access to the hash table and free list 132 */ 133 static struct mtx sf_buf_lock; 134 135 extern int _ucodesel, _udatasel; 136 137 /* 138 * Finish a fork operation, with process p2 nearly set up. 139 * Copy and update the pcb, set up the stack so that the child 140 * ready to run and return to user mode. 141 */ 142 void 143 cpu_fork(td1, p2, td2, flags) 144 register struct thread *td1; 145 register struct proc *p2; 146 struct thread *td2; 147 int flags; 148 { 149 register struct proc *p1; 150 struct pcb *pcb2; 151 struct mdproc *mdp2; 152 #ifdef DEV_NPX 153 register_t savecrit; 154 #endif 155 156 p1 = td1->td_proc; 157 if ((flags & RFPROC) == 0) { 158 if ((flags & RFMEM) == 0) { 159 /* unshare user LDT */ 160 struct mdproc *mdp1 = &p1->p_md; 161 struct proc_ldt *pldt, *pldt1; 162 163 mtx_lock_spin(&dt_lock); 164 if ((pldt1 = mdp1->md_ldt) != NULL && 165 pldt1->ldt_refcnt > 1) { 166 pldt = user_ldt_alloc(mdp1, pldt1->ldt_len); 167 if (pldt == NULL) 168 panic("could not copy LDT"); 169 mdp1->md_ldt = pldt; 170 set_user_ldt(mdp1); 171 user_ldt_deref(pldt1); 172 } else 173 mtx_unlock_spin(&dt_lock); 174 } 175 return; 176 } 177 178 /* Ensure that p1's pcb is up to date. */ 179 if (td1 == curthread) 180 td1->td_pcb->pcb_gs = rgs(); 181 #ifdef DEV_NPX 182 savecrit = intr_disable(); 183 if (PCPU_GET(fpcurthread) == td1) 184 npxsave(&td1->td_pcb->pcb_save); 185 intr_restore(savecrit); 186 #endif 187 188 /* Point the pcb to the top of the stack */ 189 pcb2 = (struct pcb *)(td2->td_kstack + 190 td2->td_kstack_pages * PAGE_SIZE) - 1; 191 td2->td_pcb = pcb2; 192 193 /* Copy p1's pcb */ 194 bcopy(td1->td_pcb, pcb2, sizeof(*pcb2)); 195 196 /* Point mdproc and then copy over td1's contents */ 197 mdp2 = &p2->p_md; 198 bcopy(&p1->p_md, mdp2, sizeof(*mdp2)); 199 200 /* 201 * Create a new fresh stack for the new process. 202 * Copy the trap frame for the return to user mode as if from a 203 * syscall. This copies most of the user mode register values. 204 * The -16 is so we can expand the trapframe if we go to vm86. 205 */ 206 td2->td_frame = (struct trapframe *)((caddr_t)td2->td_pcb - 16) - 1; 207 bcopy(td1->td_frame, td2->td_frame, sizeof(struct trapframe)); 208 209 td2->td_frame->tf_eax = 0; /* Child returns zero */ 210 td2->td_frame->tf_eflags &= ~PSL_C; /* success */ 211 td2->td_frame->tf_edx = 1; 212 213 /* 214 * If the parent process has the trap bit set (i.e. a debugger had 215 * single stepped the process to the system call), we need to clear 216 * the trap flag from the new frame unless the debugger had set PF_FORK 217 * on the parent. Otherwise, the child will receive a (likely 218 * unexpected) SIGTRAP when it executes the first instruction after 219 * returning to userland. 220 */ 221 if ((p1->p_pfsflags & PF_FORK) == 0) 222 td2->td_frame->tf_eflags &= ~PSL_T; 223 224 /* 225 * Set registers for trampoline to user mode. Leave space for the 226 * return address on stack. These are the kernel mode register values. 227 */ 228 #ifdef PAE 229 pcb2->pcb_cr3 = vtophys(vmspace_pmap(p2->p_vmspace)->pm_pdpt); 230 #else 231 pcb2->pcb_cr3 = vtophys(vmspace_pmap(p2->p_vmspace)->pm_pdir); 232 #endif 233 pcb2->pcb_edi = 0; 234 pcb2->pcb_esi = (int)fork_return; /* fork_trampoline argument */ 235 pcb2->pcb_ebp = 0; 236 pcb2->pcb_esp = (int)td2->td_frame - sizeof(void *); 237 pcb2->pcb_ebx = (int)td2; /* fork_trampoline argument */ 238 pcb2->pcb_eip = (int)fork_trampoline; 239 pcb2->pcb_psl = PSL_KERNEL; /* ints disabled */ 240 /*- 241 * pcb2->pcb_dr*: cloned above. 242 * pcb2->pcb_savefpu: cloned above. 243 * pcb2->pcb_flags: cloned above. 244 * pcb2->pcb_onfault: cloned above (always NULL here?). 245 * pcb2->pcb_gs: cloned above. 246 * pcb2->pcb_ext: cleared below. 247 */ 248 249 /* 250 * XXX don't copy the i/o pages. this should probably be fixed. 251 */ 252 pcb2->pcb_ext = 0; 253 254 /* Copy the LDT, if necessary. */ 255 mtx_lock_spin(&dt_lock); 256 if (mdp2->md_ldt != NULL) { 257 if (flags & RFMEM) { 258 mdp2->md_ldt->ldt_refcnt++; 259 } else { 260 mdp2->md_ldt = user_ldt_alloc(mdp2, 261 mdp2->md_ldt->ldt_len); 262 if (mdp2->md_ldt == NULL) 263 panic("could not copy LDT"); 264 } 265 } 266 mtx_unlock_spin(&dt_lock); 267 268 /* Setup to release spin count in fork_exit(). */ 269 td2->td_md.md_spinlock_count = 1; 270 /* 271 * XXX XEN need to check on PSL_USER is handled 272 */ 273 #ifdef XEN 274 td2->td_md.md_saved_flags = 0; 275 #else 276 td2->td_md.md_saved_flags = PSL_KERNEL | PSL_I; 277 #endif 278 /* 279 * Now, cpu_switch() can schedule the new process. 280 * pcb_esp is loaded pointing to the cpu_switch() stack frame 281 * containing the return address when exiting cpu_switch. 282 * This will normally be to fork_trampoline(), which will have 283 * %ebx loaded with the new proc's pointer. fork_trampoline() 284 * will set up a stack to call fork_return(p, frame); to complete 285 * the return to user-mode. 286 */ 287 } 288 289 /* 290 * Intercept the return address from a freshly forked process that has NOT 291 * been scheduled yet. 292 * 293 * This is needed to make kernel threads stay in kernel mode. 294 */ 295 void 296 cpu_set_fork_handler(td, func, arg) 297 struct thread *td; 298 void (*func)(void *); 299 void *arg; 300 { 301 /* 302 * Note that the trap frame follows the args, so the function 303 * is really called like this: func(arg, frame); 304 */ 305 td->td_pcb->pcb_esi = (int) func; /* function */ 306 td->td_pcb->pcb_ebx = (int) arg; /* first arg */ 307 } 308 309 void 310 cpu_exit(struct thread *td) 311 { 312 313 /* 314 * If this process has a custom LDT, release it. Reset pc->pcb_gs 315 * and %gs before we free it in case they refer to an LDT entry. 316 */ 317 mtx_lock_spin(&dt_lock); 318 if (td->td_proc->p_md.md_ldt) { 319 td->td_pcb->pcb_gs = _udatasel; 320 load_gs(_udatasel); 321 user_ldt_free(td); 322 } else 323 mtx_unlock_spin(&dt_lock); 324 } 325 326 void 327 cpu_thread_exit(struct thread *td) 328 { 329 330 #ifdef DEV_NPX 331 if (td == PCPU_GET(fpcurthread)) 332 npxdrop(); 333 #endif 334 335 /* Disable any hardware breakpoints. */ 336 if (td->td_pcb->pcb_flags & PCB_DBREGS) { 337 reset_dbregs(); 338 td->td_pcb->pcb_flags &= ~PCB_DBREGS; 339 } 340 } 341 342 void 343 cpu_thread_clean(struct thread *td) 344 { 345 struct pcb *pcb; 346 347 pcb = td->td_pcb; 348 if (pcb->pcb_ext != NULL) { 349 /* if (pcb->pcb_ext->ext_refcount-- == 1) ?? */ 350 /* 351 * XXX do we need to move the TSS off the allocated pages 352 * before freeing them? (not done here) 353 */ 354 kmem_free(kernel_map, (vm_offset_t)pcb->pcb_ext, 355 ctob(IOPAGES + 1)); 356 pcb->pcb_ext = NULL; 357 } 358 } 359 360 void 361 cpu_thread_swapin(struct thread *td) 362 { 363 } 364 365 void 366 cpu_thread_swapout(struct thread *td) 367 { 368 } 369 370 void 371 cpu_thread_alloc(struct thread *td) 372 { 373 374 td->td_pcb = (struct pcb *)(td->td_kstack + 375 td->td_kstack_pages * PAGE_SIZE) - 1; 376 td->td_frame = (struct trapframe *)((caddr_t)td->td_pcb - 16) - 1; 377 td->td_pcb->pcb_ext = NULL; 378 } 379 380 void 381 cpu_thread_free(struct thread *td) 382 { 383 384 cpu_thread_clean(td); 385 } 386 387 /* 388 * Initialize machine state (pcb and trap frame) for a new thread about to 389 * upcall. Put enough state in the new thread's PCB to get it to go back 390 * userret(), where we can intercept it again to set the return (upcall) 391 * Address and stack, along with those from upcals that are from other sources 392 * such as those generated in thread_userret() itself. 393 */ 394 void 395 cpu_set_upcall(struct thread *td, struct thread *td0) 396 { 397 struct pcb *pcb2; 398 399 /* Point the pcb to the top of the stack. */ 400 pcb2 = td->td_pcb; 401 402 /* 403 * Copy the upcall pcb. This loads kernel regs. 404 * Those not loaded individually below get their default 405 * values here. 406 */ 407 bcopy(td0->td_pcb, pcb2, sizeof(*pcb2)); 408 pcb2->pcb_flags &= ~(PCB_NPXTRAP|PCB_NPXINITDONE); 409 410 /* 411 * Create a new fresh stack for the new thread. 412 */ 413 bcopy(td0->td_frame, td->td_frame, sizeof(struct trapframe)); 414 415 /* If the current thread has the trap bit set (i.e. a debugger had 416 * single stepped the process to the system call), we need to clear 417 * the trap flag from the new frame. Otherwise, the new thread will 418 * receive a (likely unexpected) SIGTRAP when it executes the first 419 * instruction after returning to userland. 420 */ 421 td->td_frame->tf_eflags &= ~PSL_T; 422 423 /* 424 * Set registers for trampoline to user mode. Leave space for the 425 * return address on stack. These are the kernel mode register values. 426 */ 427 #ifdef PAE 428 pcb2->pcb_cr3 = vtophys(vmspace_pmap(td->td_proc->p_vmspace)->pm_pdpt); 429 #else 430 pcb2->pcb_cr3 = vtophys(vmspace_pmap(td->td_proc->p_vmspace)->pm_pdir); 431 #endif 432 pcb2->pcb_edi = 0; 433 pcb2->pcb_esi = (int)fork_return; /* trampoline arg */ 434 pcb2->pcb_ebp = 0; 435 pcb2->pcb_esp = (int)td->td_frame - sizeof(void *); /* trampoline arg */ 436 pcb2->pcb_ebx = (int)td; /* trampoline arg */ 437 pcb2->pcb_eip = (int)fork_trampoline; 438 pcb2->pcb_psl &= ~(PSL_I); /* interrupts must be disabled */ 439 pcb2->pcb_gs = rgs(); 440 /* 441 * If we didn't copy the pcb, we'd need to do the following registers: 442 * pcb2->pcb_dr*: cloned above. 443 * pcb2->pcb_savefpu: cloned above. 444 * pcb2->pcb_flags: cloned above. 445 * pcb2->pcb_onfault: cloned above (always NULL here?). 446 * pcb2->pcb_gs: cloned above. 447 * pcb2->pcb_ext: cleared below. 448 */ 449 pcb2->pcb_ext = NULL; 450 451 /* Setup to release spin count in fork_exit(). */ 452 td->td_md.md_spinlock_count = 1; 453 #ifdef XEN 454 td->td_md.md_saved_flags = 0; 455 #else 456 td->td_md.md_saved_flags = PSL_KERNEL | PSL_I; 457 #endif 458 } 459 460 /* 461 * Set that machine state for performing an upcall that has to 462 * be done in thread_userret() so that those upcalls generated 463 * in thread_userret() itself can be done as well. 464 */ 465 void 466 cpu_set_upcall_kse(struct thread *td, void (*entry)(void *), void *arg, 467 stack_t *stack) 468 { 469 470 /* 471 * Do any extra cleaning that needs to be done. 472 * The thread may have optional components 473 * that are not present in a fresh thread. 474 * This may be a recycled thread so make it look 475 * as though it's newly allocated. 476 */ 477 cpu_thread_clean(td); 478 479 /* 480 * Set the trap frame to point at the beginning of the uts 481 * function. 482 */ 483 td->td_frame->tf_ebp = 0; 484 td->td_frame->tf_esp = 485 (((int)stack->ss_sp + stack->ss_size - 4) & ~0x0f) - 4; 486 td->td_frame->tf_eip = (int)entry; 487 488 /* 489 * Pass the address of the mailbox for this kse to the uts 490 * function as a parameter on the stack. 491 */ 492 suword((void *)(td->td_frame->tf_esp + sizeof(void *)), 493 (int)arg); 494 } 495 496 int 497 cpu_set_user_tls(struct thread *td, void *tls_base) 498 { 499 struct segment_descriptor sd; 500 uint32_t base; 501 502 /* 503 * Construct a descriptor and store it in the pcb for 504 * the next context switch. Also store it in the gdt 505 * so that the load of tf_fs into %fs will activate it 506 * at return to userland. 507 */ 508 base = (uint32_t)tls_base; 509 sd.sd_lobase = base & 0xffffff; 510 sd.sd_hibase = (base >> 24) & 0xff; 511 sd.sd_lolimit = 0xffff; /* 4GB limit, wraps around */ 512 sd.sd_hilimit = 0xf; 513 sd.sd_type = SDT_MEMRWA; 514 sd.sd_dpl = SEL_UPL; 515 sd.sd_p = 1; 516 sd.sd_xx = 0; 517 sd.sd_def32 = 1; 518 sd.sd_gran = 1; 519 critical_enter(); 520 /* set %gs */ 521 td->td_pcb->pcb_gsd = sd; 522 if (td == curthread) { 523 PCPU_GET(fsgs_gdt)[1] = sd; 524 load_gs(GSEL(GUGS_SEL, SEL_UPL)); 525 } 526 critical_exit(); 527 return (0); 528 } 529 530 /* 531 * Convert kernel VA to physical address 532 */ 533 vm_paddr_t 534 kvtop(void *addr) 535 { 536 vm_paddr_t pa; 537 538 pa = pmap_kextract((vm_offset_t)addr); 539 if (pa == 0) 540 panic("kvtop: zero page frame"); 541 return (pa); 542 } 543 544 #ifdef SMP 545 static void 546 cpu_reset_proxy() 547 { 548 549 cpu_reset_proxy_active = 1; 550 while (cpu_reset_proxy_active == 1) 551 ; /* Wait for other cpu to see that we've started */ 552 stop_cpus((1<<cpu_reset_proxyid)); 553 printf("cpu_reset_proxy: Stopped CPU %d\n", cpu_reset_proxyid); 554 DELAY(1000000); 555 cpu_reset_real(); 556 } 557 #endif 558 559 void 560 cpu_reset() 561 { 562 #ifdef XBOX 563 if (arch_i386_is_xbox) { 564 /* Kick the PIC16L, it can reboot the box */ 565 pic16l_reboot(); 566 for (;;); 567 } 568 #endif 569 570 #ifdef SMP 571 u_int cnt, map; 572 573 if (smp_active) { 574 map = PCPU_GET(other_cpus) & ~stopped_cpus; 575 if (map != 0) { 576 printf("cpu_reset: Stopping other CPUs\n"); 577 stop_cpus(map); 578 } 579 580 if (PCPU_GET(cpuid) != 0) { 581 cpu_reset_proxyid = PCPU_GET(cpuid); 582 cpustop_restartfunc = cpu_reset_proxy; 583 cpu_reset_proxy_active = 0; 584 printf("cpu_reset: Restarting BSP\n"); 585 586 /* Restart CPU #0. */ 587 /* XXX: restart_cpus(1 << 0); */ 588 atomic_store_rel_int(&started_cpus, (1 << 0)); 589 590 cnt = 0; 591 while (cpu_reset_proxy_active == 0 && cnt < 10000000) 592 cnt++; /* Wait for BSP to announce restart */ 593 if (cpu_reset_proxy_active == 0) 594 printf("cpu_reset: Failed to restart BSP\n"); 595 enable_intr(); 596 cpu_reset_proxy_active = 2; 597 598 while (1); 599 /* NOTREACHED */ 600 } 601 602 DELAY(1000000); 603 } 604 #endif 605 cpu_reset_real(); 606 /* NOTREACHED */ 607 } 608 609 static void 610 cpu_reset_real() 611 { 612 struct region_descriptor null_idt; 613 #ifndef PC98 614 int b; 615 #endif 616 617 disable_intr(); 618 #ifdef XEN 619 if (smp_processor_id() == 0) 620 HYPERVISOR_shutdown(SHUTDOWN_reboot); 621 else 622 HYPERVISOR_shutdown(SHUTDOWN_poweroff); 623 #endif 624 #ifdef CPU_ELAN 625 if (elan_mmcr != NULL) 626 elan_mmcr->RESCFG = 1; 627 #endif 628 629 if (cpu == CPU_GEODE1100) { 630 /* Attempt Geode's own reset */ 631 outl(0xcf8, 0x80009044ul); 632 outl(0xcfc, 0xf); 633 } 634 635 #ifdef PC98 636 /* 637 * Attempt to do a CPU reset via CPU reset port. 638 */ 639 if ((inb(0x35) & 0xa0) != 0xa0) { 640 outb(0x37, 0x0f); /* SHUT0 = 0. */ 641 outb(0x37, 0x0b); /* SHUT1 = 0. */ 642 } 643 outb(0xf0, 0x00); /* Reset. */ 644 #else 645 #if !defined(BROKEN_KEYBOARD_RESET) 646 /* 647 * Attempt to do a CPU reset via the keyboard controller, 648 * do not turn off GateA20, as any machine that fails 649 * to do the reset here would then end up in no man's land. 650 */ 651 outb(IO_KBD + 4, 0xFE); 652 DELAY(500000); /* wait 0.5 sec to see if that did it */ 653 #endif 654 655 /* 656 * Attempt to force a reset via the Reset Control register at 657 * I/O port 0xcf9. Bit 2 forces a system reset when it 658 * transitions from 0 to 1. Bit 1 selects the type of reset 659 * to attempt: 0 selects a "soft" reset, and 1 selects a 660 * "hard" reset. We try a "hard" reset. The first write sets 661 * bit 1 to select a "hard" reset and clears bit 2. The 662 * second write forces a 0 -> 1 transition in bit 2 to trigger 663 * a reset. 664 */ 665 outb(0xcf9, 0x2); 666 outb(0xcf9, 0x6); 667 DELAY(500000); /* wait 0.5 sec to see if that did it */ 668 669 /* 670 * Attempt to force a reset via the Fast A20 and Init register 671 * at I/O port 0x92. Bit 1 serves as an alternate A20 gate. 672 * Bit 0 asserts INIT# when set to 1. We are careful to only 673 * preserve bit 1 while setting bit 0. We also must clear bit 674 * 0 before setting it if it isn't already clear. 675 */ 676 b = inb(0x92); 677 if (b != 0xff) { 678 if ((b & 0x1) != 0) 679 outb(0x92, b & 0xfe); 680 outb(0x92, b | 0x1); 681 DELAY(500000); /* wait 0.5 sec to see if that did it */ 682 } 683 #endif /* PC98 */ 684 685 printf("No known reset method worked, attempting CPU shutdown\n"); 686 DELAY(1000000); /* wait 1 sec for printf to complete */ 687 688 /* Wipe the IDT. */ 689 null_idt.rd_limit = 0; 690 null_idt.rd_base = 0; 691 lidt(&null_idt); 692 693 /* "good night, sweet prince .... <THUNK!>" */ 694 breakpoint(); 695 696 /* NOTREACHED */ 697 while(1); 698 } 699 700 /* 701 * Allocate a pool of sf_bufs (sendfile(2) or "super-fast" if you prefer. :-)) 702 */ 703 static void 704 sf_buf_init(void *arg) 705 { 706 struct sf_buf *sf_bufs; 707 vm_offset_t sf_base; 708 int i; 709 710 nsfbufs = NSFBUFS; 711 TUNABLE_INT_FETCH("kern.ipc.nsfbufs", &nsfbufs); 712 713 sf_buf_active = hashinit(nsfbufs, M_TEMP, &sf_buf_hashmask); 714 TAILQ_INIT(&sf_buf_freelist); 715 sf_base = kmem_alloc_nofault(kernel_map, nsfbufs * PAGE_SIZE); 716 sf_bufs = malloc(nsfbufs * sizeof(struct sf_buf), M_TEMP, 717 M_NOWAIT | M_ZERO); 718 for (i = 0; i < nsfbufs; i++) { 719 sf_bufs[i].kva = sf_base + i * PAGE_SIZE; 720 TAILQ_INSERT_TAIL(&sf_buf_freelist, &sf_bufs[i], free_entry); 721 } 722 sf_buf_alloc_want = 0; 723 mtx_init(&sf_buf_lock, "sf_buf", NULL, MTX_DEF); 724 } 725 726 /* 727 * Get an sf_buf from the freelist. May block if none are available. 728 */ 729 struct sf_buf * 730 sf_buf_alloc(struct vm_page *m, int flags) 731 { 732 pt_entry_t opte, *ptep; 733 struct sf_head *hash_list; 734 struct sf_buf *sf; 735 #ifdef SMP 736 cpumask_t cpumask, other_cpus; 737 #endif 738 int error; 739 740 KASSERT(curthread->td_pinned > 0 || (flags & SFB_CPUPRIVATE) == 0, 741 ("sf_buf_alloc(SFB_CPUPRIVATE): curthread not pinned")); 742 hash_list = &sf_buf_active[SF_BUF_HASH(m)]; 743 mtx_lock(&sf_buf_lock); 744 LIST_FOREACH(sf, hash_list, list_entry) { 745 if (sf->m == m) { 746 sf->ref_count++; 747 if (sf->ref_count == 1) { 748 TAILQ_REMOVE(&sf_buf_freelist, sf, free_entry); 749 nsfbufsused++; 750 nsfbufspeak = imax(nsfbufspeak, nsfbufsused); 751 } 752 #ifdef SMP 753 goto shootdown; 754 #else 755 goto done; 756 #endif 757 } 758 } 759 while ((sf = TAILQ_FIRST(&sf_buf_freelist)) == NULL) { 760 if (flags & SFB_NOWAIT) 761 goto done; 762 sf_buf_alloc_want++; 763 mbstat.sf_allocwait++; 764 error = msleep(&sf_buf_freelist, &sf_buf_lock, 765 (flags & SFB_CATCH) ? PCATCH | PVM : PVM, "sfbufa", 0); 766 sf_buf_alloc_want--; 767 768 /* 769 * If we got a signal, don't risk going back to sleep. 770 */ 771 if (error) 772 goto done; 773 } 774 TAILQ_REMOVE(&sf_buf_freelist, sf, free_entry); 775 if (sf->m != NULL) 776 LIST_REMOVE(sf, list_entry); 777 LIST_INSERT_HEAD(hash_list, sf, list_entry); 778 sf->ref_count = 1; 779 sf->m = m; 780 nsfbufsused++; 781 nsfbufspeak = imax(nsfbufspeak, nsfbufsused); 782 783 /* 784 * Update the sf_buf's virtual-to-physical mapping, flushing the 785 * virtual address from the TLB. Since the reference count for 786 * the sf_buf's old mapping was zero, that mapping is not 787 * currently in use. Consequently, there is no need to exchange 788 * the old and new PTEs atomically, even under PAE. 789 */ 790 ptep = vtopte(sf->kva); 791 opte = *ptep; 792 #ifdef XEN 793 PT_SET_MA(sf->kva, xpmap_ptom(VM_PAGE_TO_PHYS(m)) | pgeflag 794 | PG_RW | PG_V); 795 #else 796 *ptep = VM_PAGE_TO_PHYS(m) | pgeflag | PG_RW | PG_V; 797 #endif 798 799 /* 800 * Avoid unnecessary TLB invalidations: If the sf_buf's old 801 * virtual-to-physical mapping was not used, then any processor 802 * that has invalidated the sf_buf's virtual address from its TLB 803 * since the last used mapping need not invalidate again. 804 */ 805 #ifdef SMP 806 if ((opte & (PG_V | PG_A)) == (PG_V | PG_A)) 807 sf->cpumask = 0; 808 shootdown: 809 sched_pin(); 810 cpumask = PCPU_GET(cpumask); 811 if ((sf->cpumask & cpumask) == 0) { 812 sf->cpumask |= cpumask; 813 invlpg(sf->kva); 814 } 815 if ((flags & SFB_CPUPRIVATE) == 0) { 816 other_cpus = PCPU_GET(other_cpus) & ~sf->cpumask; 817 if (other_cpus != 0) { 818 sf->cpumask |= other_cpus; 819 smp_masked_invlpg(other_cpus, sf->kva); 820 } 821 } 822 sched_unpin(); 823 #else 824 if ((opte & (PG_V | PG_A)) == (PG_V | PG_A)) 825 pmap_invalidate_page(kernel_pmap, sf->kva); 826 #endif 827 done: 828 mtx_unlock(&sf_buf_lock); 829 return (sf); 830 } 831 832 /* 833 * Remove a reference from the given sf_buf, adding it to the free 834 * list when its reference count reaches zero. A freed sf_buf still, 835 * however, retains its virtual-to-physical mapping until it is 836 * recycled or reactivated by sf_buf_alloc(9). 837 */ 838 void 839 sf_buf_free(struct sf_buf *sf) 840 { 841 842 mtx_lock(&sf_buf_lock); 843 sf->ref_count--; 844 if (sf->ref_count == 0) { 845 TAILQ_INSERT_TAIL(&sf_buf_freelist, sf, free_entry); 846 nsfbufsused--; 847 #ifdef XEN 848 /* 849 * Xen doesn't like having dangling R/W mappings 850 */ 851 pmap_qremove(sf->kva, 1); 852 sf->m = NULL; 853 LIST_REMOVE(sf, list_entry); 854 #endif 855 if (sf_buf_alloc_want > 0) 856 wakeup_one(&sf_buf_freelist); 857 } 858 mtx_unlock(&sf_buf_lock); 859 } 860 861 /* 862 * Software interrupt handler for queued VM system processing. 863 */ 864 void 865 swi_vm(void *dummy) 866 { 867 if (busdma_swi_pending != 0) 868 busdma_swi(); 869 } 870 871 /* 872 * Tell whether this address is in some physical memory region. 873 * Currently used by the kernel coredump code in order to avoid 874 * dumping the ``ISA memory hole'' which could cause indefinite hangs, 875 * or other unpredictable behaviour. 876 */ 877 878 int 879 is_physical_memory(vm_paddr_t addr) 880 { 881 882 #ifdef DEV_ISA 883 /* The ISA ``memory hole''. */ 884 if (addr >= 0xa0000 && addr < 0x100000) 885 return 0; 886 #endif 887 888 /* 889 * stuff other tests for known memory-mapped devices (PCI?) 890 * here 891 */ 892 893 return 1; 894 } 895