1 /*- 2 * Copyright (c) 1997, 1998, 1999 3 * Bill Paul <wpaul@ctr.columbia.edu>. All rights reserved. 4 * 5 * Redistribution and use in source and binary forms, with or without 6 * modification, are permitted provided that the following conditions 7 * are met: 8 * 1. Redistributions of source code must retain the above copyright 9 * notice, this list of conditions and the following disclaimer. 10 * 2. Redistributions in binary form must reproduce the above copyright 11 * notice, this list of conditions and the following disclaimer in the 12 * documentation and/or other materials provided with the distribution. 13 * 3. All advertising materials mentioning features or use of this software 14 * must display the following acknowledgement: 15 * This product includes software developed by Bill Paul. 16 * 4. Neither the name of the author nor the names of any co-contributors 17 * may be used to endorse or promote products derived from this software 18 * without specific prior written permission. 19 * 20 * THIS SOFTWARE IS PROVIDED BY Bill Paul AND CONTRIBUTORS ``AS IS'' AND 21 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE 22 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE 23 * ARE DISCLAIMED. IN NO EVENT SHALL Bill Paul OR THE VOICES IN HIS HEAD 24 * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR 25 * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF 26 * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS 27 * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN 28 * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) 29 * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF 30 * THE POSSIBILITY OF SUCH DAMAGE. 31 */ 32 33 #include <sys/cdefs.h> 34 __FBSDID("$FreeBSD$"); 35 36 /* 37 * 3Com 3c90x Etherlink XL PCI NIC driver 38 * 39 * Supports the 3Com "boomerang", "cyclone" and "hurricane" PCI 40 * bus-master chips (3c90x cards and embedded controllers) including 41 * the following: 42 * 43 * 3Com 3c900-TPO 10Mbps/RJ-45 44 * 3Com 3c900-COMBO 10Mbps/RJ-45,AUI,BNC 45 * 3Com 3c905-TX 10/100Mbps/RJ-45 46 * 3Com 3c905-T4 10/100Mbps/RJ-45 47 * 3Com 3c900B-TPO 10Mbps/RJ-45 48 * 3Com 3c900B-COMBO 10Mbps/RJ-45,AUI,BNC 49 * 3Com 3c900B-TPC 10Mbps/RJ-45,BNC 50 * 3Com 3c900B-FL 10Mbps/Fiber-optic 51 * 3Com 3c905B-COMBO 10/100Mbps/RJ-45,AUI,BNC 52 * 3Com 3c905B-TX 10/100Mbps/RJ-45 53 * 3Com 3c905B-FL/FX 10/100Mbps/Fiber-optic 54 * 3Com 3c905C-TX 10/100Mbps/RJ-45 (Tornado ASIC) 55 * 3Com 3c980-TX 10/100Mbps server adapter (Hurricane ASIC) 56 * 3Com 3c980C-TX 10/100Mbps server adapter (Tornado ASIC) 57 * 3Com 3cSOHO100-TX 10/100Mbps/RJ-45 (Hurricane ASIC) 58 * 3Com 3c450-TX 10/100Mbps/RJ-45 (Tornado ASIC) 59 * 3Com 3c555 10/100Mbps/RJ-45 (MiniPCI, Laptop Hurricane) 60 * 3Com 3c556 10/100Mbps/RJ-45 (MiniPCI, Hurricane ASIC) 61 * 3Com 3c556B 10/100Mbps/RJ-45 (MiniPCI, Hurricane ASIC) 62 * 3Com 3c575TX 10/100Mbps/RJ-45 (Cardbus, Hurricane ASIC) 63 * 3Com 3c575B 10/100Mbps/RJ-45 (Cardbus, Hurricane ASIC) 64 * 3Com 3c575C 10/100Mbps/RJ-45 (Cardbus, Hurricane ASIC) 65 * 3Com 3cxfem656 10/100Mbps/RJ-45 (Cardbus, Hurricane ASIC) 66 * 3Com 3cxfem656b 10/100Mbps/RJ-45 (Cardbus, Hurricane ASIC) 67 * 3Com 3cxfem656c 10/100Mbps/RJ-45 (Cardbus, Tornado ASIC) 68 * Dell Optiplex GX1 on-board 3c918 10/100Mbps/RJ-45 69 * Dell on-board 3c920 10/100Mbps/RJ-45 70 * Dell Precision on-board 3c905B 10/100Mbps/RJ-45 71 * Dell Latitude laptop docking station embedded 3c905-TX 72 * 73 * Written by Bill Paul <wpaul@ctr.columbia.edu> 74 * Electrical Engineering Department 75 * Columbia University, New York City 76 */ 77 /* 78 * The 3c90x series chips use a bus-master DMA interface for transferring 79 * packets to and from the controller chip. Some of the "vortex" cards 80 * (3c59x) also supported a bus master mode, however for those chips 81 * you could only DMA packets to/from a contiguous memory buffer. For 82 * transmission this would mean copying the contents of the queued mbuf 83 * chain into an mbuf cluster and then DMAing the cluster. This extra 84 * copy would sort of defeat the purpose of the bus master support for 85 * any packet that doesn't fit into a single mbuf. 86 * 87 * By contrast, the 3c90x cards support a fragment-based bus master 88 * mode where mbuf chains can be encapsulated using TX descriptors. 89 * This is similar to other PCI chips such as the Texas Instruments 90 * ThunderLAN and the Intel 82557/82558. 91 * 92 * The "vortex" driver (if_vx.c) happens to work for the "boomerang" 93 * bus master chips because they maintain the old PIO interface for 94 * backwards compatibility, but starting with the 3c905B and the 95 * "cyclone" chips, the compatibility interface has been dropped. 96 * Since using bus master DMA is a big win, we use this driver to 97 * support the PCI "boomerang" chips even though they work with the 98 * "vortex" driver in order to obtain better performance. 99 */ 100 101 #ifdef HAVE_KERNEL_OPTION_HEADERS 102 #include "opt_device_polling.h" 103 #endif 104 105 #include <sys/param.h> 106 #include <sys/systm.h> 107 #include <sys/sockio.h> 108 #include <sys/endian.h> 109 #include <sys/kernel.h> 110 #include <sys/malloc.h> 111 #include <sys/mbuf.h> 112 #include <sys/module.h> 113 #include <sys/socket.h> 114 #include <sys/taskqueue.h> 115 116 #include <net/if.h> 117 #include <net/if_var.h> 118 #include <net/if_arp.h> 119 #include <net/ethernet.h> 120 #include <net/if_dl.h> 121 #include <net/if_media.h> 122 #include <net/if_types.h> 123 124 #include <net/bpf.h> 125 126 #include <machine/bus.h> 127 #include <machine/resource.h> 128 #include <sys/bus.h> 129 #include <sys/rman.h> 130 131 #include <dev/mii/mii.h> 132 #include <dev/mii/mii_bitbang.h> 133 #include <dev/mii/miivar.h> 134 135 #include <dev/pci/pcireg.h> 136 #include <dev/pci/pcivar.h> 137 138 MODULE_DEPEND(xl, pci, 1, 1, 1); 139 MODULE_DEPEND(xl, ether, 1, 1, 1); 140 MODULE_DEPEND(xl, miibus, 1, 1, 1); 141 142 /* "device miibus" required. See GENERIC if you get errors here. */ 143 #include "miibus_if.h" 144 145 #include <dev/xl/if_xlreg.h> 146 147 /* 148 * TX Checksumming is disabled by default for two reasons: 149 * - TX Checksumming will occasionally produce corrupt packets 150 * - TX Checksumming seems to reduce performance 151 * 152 * Only 905B/C cards were reported to have this problem, it is possible 153 * that later chips _may_ be immune. 154 */ 155 #define XL905B_TXCSUM_BROKEN 1 156 157 #ifdef XL905B_TXCSUM_BROKEN 158 #define XL905B_CSUM_FEATURES 0 159 #else 160 #define XL905B_CSUM_FEATURES (CSUM_IP | CSUM_TCP | CSUM_UDP) 161 #endif 162 163 /* 164 * Various supported device vendors/types and their names. 165 */ 166 static const struct xl_type xl_devs[] = { 167 { TC_VENDORID, TC_DEVICEID_BOOMERANG_10BT, 168 "3Com 3c900-TPO Etherlink XL" }, 169 { TC_VENDORID, TC_DEVICEID_BOOMERANG_10BT_COMBO, 170 "3Com 3c900-COMBO Etherlink XL" }, 171 { TC_VENDORID, TC_DEVICEID_BOOMERANG_10_100BT, 172 "3Com 3c905-TX Fast Etherlink XL" }, 173 { TC_VENDORID, TC_DEVICEID_BOOMERANG_100BT4, 174 "3Com 3c905-T4 Fast Etherlink XL" }, 175 { TC_VENDORID, TC_DEVICEID_KRAKATOA_10BT, 176 "3Com 3c900B-TPO Etherlink XL" }, 177 { TC_VENDORID, TC_DEVICEID_KRAKATOA_10BT_COMBO, 178 "3Com 3c900B-COMBO Etherlink XL" }, 179 { TC_VENDORID, TC_DEVICEID_KRAKATOA_10BT_TPC, 180 "3Com 3c900B-TPC Etherlink XL" }, 181 { TC_VENDORID, TC_DEVICEID_CYCLONE_10FL, 182 "3Com 3c900B-FL Etherlink XL" }, 183 { TC_VENDORID, TC_DEVICEID_HURRICANE_10_100BT, 184 "3Com 3c905B-TX Fast Etherlink XL" }, 185 { TC_VENDORID, TC_DEVICEID_CYCLONE_10_100BT4, 186 "3Com 3c905B-T4 Fast Etherlink XL" }, 187 { TC_VENDORID, TC_DEVICEID_CYCLONE_10_100FX, 188 "3Com 3c905B-FX/SC Fast Etherlink XL" }, 189 { TC_VENDORID, TC_DEVICEID_CYCLONE_10_100_COMBO, 190 "3Com 3c905B-COMBO Fast Etherlink XL" }, 191 { TC_VENDORID, TC_DEVICEID_TORNADO_10_100BT, 192 "3Com 3c905C-TX Fast Etherlink XL" }, 193 { TC_VENDORID, TC_DEVICEID_TORNADO_10_100BT_920B, 194 "3Com 3c920B-EMB Integrated Fast Etherlink XL" }, 195 { TC_VENDORID, TC_DEVICEID_TORNADO_10_100BT_920B_WNM, 196 "3Com 3c920B-EMB-WNM Integrated Fast Etherlink XL" }, 197 { TC_VENDORID, TC_DEVICEID_HURRICANE_10_100BT_SERV, 198 "3Com 3c980 Fast Etherlink XL" }, 199 { TC_VENDORID, TC_DEVICEID_TORNADO_10_100BT_SERV, 200 "3Com 3c980C Fast Etherlink XL" }, 201 { TC_VENDORID, TC_DEVICEID_HURRICANE_SOHO100TX, 202 "3Com 3cSOHO100-TX OfficeConnect" }, 203 { TC_VENDORID, TC_DEVICEID_TORNADO_HOMECONNECT, 204 "3Com 3c450-TX HomeConnect" }, 205 { TC_VENDORID, TC_DEVICEID_HURRICANE_555, 206 "3Com 3c555 Fast Etherlink XL" }, 207 { TC_VENDORID, TC_DEVICEID_HURRICANE_556, 208 "3Com 3c556 Fast Etherlink XL" }, 209 { TC_VENDORID, TC_DEVICEID_HURRICANE_556B, 210 "3Com 3c556B Fast Etherlink XL" }, 211 { TC_VENDORID, TC_DEVICEID_HURRICANE_575A, 212 "3Com 3c575TX Fast Etherlink XL" }, 213 { TC_VENDORID, TC_DEVICEID_HURRICANE_575B, 214 "3Com 3c575B Fast Etherlink XL" }, 215 { TC_VENDORID, TC_DEVICEID_HURRICANE_575C, 216 "3Com 3c575C Fast Etherlink XL" }, 217 { TC_VENDORID, TC_DEVICEID_HURRICANE_656, 218 "3Com 3c656 Fast Etherlink XL" }, 219 { TC_VENDORID, TC_DEVICEID_HURRICANE_656B, 220 "3Com 3c656B Fast Etherlink XL" }, 221 { TC_VENDORID, TC_DEVICEID_TORNADO_656C, 222 "3Com 3c656C Fast Etherlink XL" }, 223 { 0, 0, NULL } 224 }; 225 226 static int xl_probe(device_t); 227 static int xl_attach(device_t); 228 static int xl_detach(device_t); 229 230 static int xl_newbuf(struct xl_softc *, struct xl_chain_onefrag *); 231 static void xl_tick(void *); 232 static void xl_stats_update(struct xl_softc *); 233 static int xl_encap(struct xl_softc *, struct xl_chain *, struct mbuf **); 234 static int xl_rxeof(struct xl_softc *); 235 static void xl_rxeof_task(void *, int); 236 static int xl_rx_resync(struct xl_softc *); 237 static void xl_txeof(struct xl_softc *); 238 static void xl_txeof_90xB(struct xl_softc *); 239 static void xl_txeoc(struct xl_softc *); 240 static void xl_intr(void *); 241 static void xl_start(struct ifnet *); 242 static void xl_start_locked(struct ifnet *); 243 static void xl_start_90xB_locked(struct ifnet *); 244 static int xl_ioctl(struct ifnet *, u_long, caddr_t); 245 static void xl_init(void *); 246 static void xl_init_locked(struct xl_softc *); 247 static void xl_stop(struct xl_softc *); 248 static int xl_watchdog(struct xl_softc *); 249 static int xl_shutdown(device_t); 250 static int xl_suspend(device_t); 251 static int xl_resume(device_t); 252 static void xl_setwol(struct xl_softc *); 253 254 #ifdef DEVICE_POLLING 255 static int xl_poll(struct ifnet *ifp, enum poll_cmd cmd, int count); 256 static int xl_poll_locked(struct ifnet *ifp, enum poll_cmd cmd, int count); 257 #endif 258 259 static int xl_ifmedia_upd(struct ifnet *); 260 static void xl_ifmedia_sts(struct ifnet *, struct ifmediareq *); 261 262 static int xl_eeprom_wait(struct xl_softc *); 263 static int xl_read_eeprom(struct xl_softc *, caddr_t, int, int, int); 264 265 static void xl_rxfilter(struct xl_softc *); 266 static void xl_rxfilter_90x(struct xl_softc *); 267 static void xl_rxfilter_90xB(struct xl_softc *); 268 static void xl_setcfg(struct xl_softc *); 269 static void xl_setmode(struct xl_softc *, int); 270 static void xl_reset(struct xl_softc *); 271 static int xl_list_rx_init(struct xl_softc *); 272 static int xl_list_tx_init(struct xl_softc *); 273 static int xl_list_tx_init_90xB(struct xl_softc *); 274 static void xl_wait(struct xl_softc *); 275 static void xl_mediacheck(struct xl_softc *); 276 static void xl_choose_media(struct xl_softc *sc, int *media); 277 static void xl_choose_xcvr(struct xl_softc *, int); 278 static void xl_dma_map_addr(void *, bus_dma_segment_t *, int, int); 279 #ifdef notdef 280 static void xl_testpacket(struct xl_softc *); 281 #endif 282 283 static int xl_miibus_readreg(device_t, int, int); 284 static int xl_miibus_writereg(device_t, int, int, int); 285 static void xl_miibus_statchg(device_t); 286 static void xl_miibus_mediainit(device_t); 287 288 /* 289 * MII bit-bang glue 290 */ 291 static uint32_t xl_mii_bitbang_read(device_t); 292 static void xl_mii_bitbang_write(device_t, uint32_t); 293 294 static const struct mii_bitbang_ops xl_mii_bitbang_ops = { 295 xl_mii_bitbang_read, 296 xl_mii_bitbang_write, 297 { 298 XL_MII_DATA, /* MII_BIT_MDO */ 299 XL_MII_DATA, /* MII_BIT_MDI */ 300 XL_MII_CLK, /* MII_BIT_MDC */ 301 XL_MII_DIR, /* MII_BIT_DIR_HOST_PHY */ 302 0, /* MII_BIT_DIR_PHY_HOST */ 303 } 304 }; 305 306 static device_method_t xl_methods[] = { 307 /* Device interface */ 308 DEVMETHOD(device_probe, xl_probe), 309 DEVMETHOD(device_attach, xl_attach), 310 DEVMETHOD(device_detach, xl_detach), 311 DEVMETHOD(device_shutdown, xl_shutdown), 312 DEVMETHOD(device_suspend, xl_suspend), 313 DEVMETHOD(device_resume, xl_resume), 314 315 /* MII interface */ 316 DEVMETHOD(miibus_readreg, xl_miibus_readreg), 317 DEVMETHOD(miibus_writereg, xl_miibus_writereg), 318 DEVMETHOD(miibus_statchg, xl_miibus_statchg), 319 DEVMETHOD(miibus_mediainit, xl_miibus_mediainit), 320 321 DEVMETHOD_END 322 }; 323 324 static driver_t xl_driver = { 325 "xl", 326 xl_methods, 327 sizeof(struct xl_softc) 328 }; 329 330 static devclass_t xl_devclass; 331 332 DRIVER_MODULE_ORDERED(xl, pci, xl_driver, xl_devclass, NULL, NULL, 333 SI_ORDER_ANY); 334 DRIVER_MODULE(miibus, xl, miibus_driver, miibus_devclass, NULL, NULL); 335 336 static void 337 xl_dma_map_addr(void *arg, bus_dma_segment_t *segs, int nseg, int error) 338 { 339 u_int32_t *paddr; 340 341 paddr = arg; 342 *paddr = segs->ds_addr; 343 } 344 345 /* 346 * Murphy's law says that it's possible the chip can wedge and 347 * the 'command in progress' bit may never clear. Hence, we wait 348 * only a finite amount of time to avoid getting caught in an 349 * infinite loop. Normally this delay routine would be a macro, 350 * but it isn't called during normal operation so we can afford 351 * to make it a function. Suppress warning when card gone. 352 */ 353 static void 354 xl_wait(struct xl_softc *sc) 355 { 356 int i; 357 358 for (i = 0; i < XL_TIMEOUT; i++) { 359 if ((CSR_READ_2(sc, XL_STATUS) & XL_STAT_CMDBUSY) == 0) 360 break; 361 } 362 363 if (i == XL_TIMEOUT && bus_child_present(sc->xl_dev)) 364 device_printf(sc->xl_dev, "command never completed!\n"); 365 } 366 367 /* 368 * MII access routines are provided for adapters with external 369 * PHYs (3c905-TX, 3c905-T4, 3c905B-T4) and those with built-in 370 * autoneg logic that's faked up to look like a PHY (3c905B-TX). 371 * Note: if you don't perform the MDIO operations just right, 372 * it's possible to end up with code that works correctly with 373 * some chips/CPUs/processor speeds/bus speeds/etc but not 374 * with others. 375 */ 376 377 /* 378 * Read the MII serial port for the MII bit-bang module. 379 */ 380 static uint32_t 381 xl_mii_bitbang_read(device_t dev) 382 { 383 struct xl_softc *sc; 384 uint32_t val; 385 386 sc = device_get_softc(dev); 387 388 /* We're already in window 4. */ 389 val = CSR_READ_2(sc, XL_W4_PHY_MGMT); 390 CSR_BARRIER(sc, XL_W4_PHY_MGMT, 2, 391 BUS_SPACE_BARRIER_READ | BUS_SPACE_BARRIER_WRITE); 392 393 return (val); 394 } 395 396 /* 397 * Write the MII serial port for the MII bit-bang module. 398 */ 399 static void 400 xl_mii_bitbang_write(device_t dev, uint32_t val) 401 { 402 struct xl_softc *sc; 403 404 sc = device_get_softc(dev); 405 406 /* We're already in window 4. */ 407 CSR_WRITE_2(sc, XL_W4_PHY_MGMT, val); 408 CSR_BARRIER(sc, XL_W4_PHY_MGMT, 2, 409 BUS_SPACE_BARRIER_READ | BUS_SPACE_BARRIER_WRITE); 410 } 411 412 static int 413 xl_miibus_readreg(device_t dev, int phy, int reg) 414 { 415 struct xl_softc *sc; 416 417 sc = device_get_softc(dev); 418 419 /* Select the window 4. */ 420 XL_SEL_WIN(4); 421 422 return (mii_bitbang_readreg(dev, &xl_mii_bitbang_ops, phy, reg)); 423 } 424 425 static int 426 xl_miibus_writereg(device_t dev, int phy, int reg, int data) 427 { 428 struct xl_softc *sc; 429 430 sc = device_get_softc(dev); 431 432 /* Select the window 4. */ 433 XL_SEL_WIN(4); 434 435 mii_bitbang_writereg(dev, &xl_mii_bitbang_ops, phy, reg, data); 436 437 return (0); 438 } 439 440 static void 441 xl_miibus_statchg(device_t dev) 442 { 443 struct xl_softc *sc; 444 struct mii_data *mii; 445 uint8_t macctl; 446 447 sc = device_get_softc(dev); 448 mii = device_get_softc(sc->xl_miibus); 449 450 xl_setcfg(sc); 451 452 /* Set ASIC's duplex mode to match the PHY. */ 453 XL_SEL_WIN(3); 454 macctl = CSR_READ_1(sc, XL_W3_MAC_CTRL); 455 if ((IFM_OPTIONS(mii->mii_media_active) & IFM_FDX) != 0) { 456 macctl |= XL_MACCTRL_DUPLEX; 457 if (sc->xl_type == XL_TYPE_905B) { 458 if ((IFM_OPTIONS(mii->mii_media_active) & 459 IFM_ETH_RXPAUSE) != 0) 460 macctl |= XL_MACCTRL_FLOW_CONTROL_ENB; 461 else 462 macctl &= ~XL_MACCTRL_FLOW_CONTROL_ENB; 463 } 464 } else { 465 macctl &= ~XL_MACCTRL_DUPLEX; 466 if (sc->xl_type == XL_TYPE_905B) 467 macctl &= ~XL_MACCTRL_FLOW_CONTROL_ENB; 468 } 469 CSR_WRITE_1(sc, XL_W3_MAC_CTRL, macctl); 470 } 471 472 /* 473 * Special support for the 3c905B-COMBO. This card has 10/100 support 474 * plus BNC and AUI ports. This means we will have both an miibus attached 475 * plus some non-MII media settings. In order to allow this, we have to 476 * add the extra media to the miibus's ifmedia struct, but we can't do 477 * that during xl_attach() because the miibus hasn't been attached yet. 478 * So instead, we wait until the miibus probe/attach is done, at which 479 * point we will get a callback telling is that it's safe to add our 480 * extra media. 481 */ 482 static void 483 xl_miibus_mediainit(device_t dev) 484 { 485 struct xl_softc *sc; 486 struct mii_data *mii; 487 struct ifmedia *ifm; 488 489 sc = device_get_softc(dev); 490 mii = device_get_softc(sc->xl_miibus); 491 ifm = &mii->mii_media; 492 493 if (sc->xl_media & (XL_MEDIAOPT_AUI | XL_MEDIAOPT_10FL)) { 494 /* 495 * Check for a 10baseFL board in disguise. 496 */ 497 if (sc->xl_type == XL_TYPE_905B && 498 sc->xl_media == XL_MEDIAOPT_10FL) { 499 if (bootverbose) 500 device_printf(sc->xl_dev, "found 10baseFL\n"); 501 ifmedia_add(ifm, IFM_ETHER | IFM_10_FL, 0, NULL); 502 ifmedia_add(ifm, IFM_ETHER | IFM_10_FL|IFM_HDX, 0, 503 NULL); 504 if (sc->xl_caps & XL_CAPS_FULL_DUPLEX) 505 ifmedia_add(ifm, 506 IFM_ETHER | IFM_10_FL | IFM_FDX, 0, NULL); 507 } else { 508 if (bootverbose) 509 device_printf(sc->xl_dev, "found AUI\n"); 510 ifmedia_add(ifm, IFM_ETHER | IFM_10_5, 0, NULL); 511 } 512 } 513 514 if (sc->xl_media & XL_MEDIAOPT_BNC) { 515 if (bootverbose) 516 device_printf(sc->xl_dev, "found BNC\n"); 517 ifmedia_add(ifm, IFM_ETHER | IFM_10_2, 0, NULL); 518 } 519 } 520 521 /* 522 * The EEPROM is slow: give it time to come ready after issuing 523 * it a command. 524 */ 525 static int 526 xl_eeprom_wait(struct xl_softc *sc) 527 { 528 int i; 529 530 for (i = 0; i < 100; i++) { 531 if (CSR_READ_2(sc, XL_W0_EE_CMD) & XL_EE_BUSY) 532 DELAY(162); 533 else 534 break; 535 } 536 537 if (i == 100) { 538 device_printf(sc->xl_dev, "eeprom failed to come ready\n"); 539 return (1); 540 } 541 542 return (0); 543 } 544 545 /* 546 * Read a sequence of words from the EEPROM. Note that ethernet address 547 * data is stored in the EEPROM in network byte order. 548 */ 549 static int 550 xl_read_eeprom(struct xl_softc *sc, caddr_t dest, int off, int cnt, int swap) 551 { 552 int err = 0, i; 553 u_int16_t word = 0, *ptr; 554 555 #define EEPROM_5BIT_OFFSET(A) ((((A) << 2) & 0x7F00) | ((A) & 0x003F)) 556 #define EEPROM_8BIT_OFFSET(A) ((A) & 0x003F) 557 /* 558 * XXX: WARNING! DANGER! 559 * It's easy to accidentally overwrite the rom content! 560 * Note: the 3c575 uses 8bit EEPROM offsets. 561 */ 562 XL_SEL_WIN(0); 563 564 if (xl_eeprom_wait(sc)) 565 return (1); 566 567 if (sc->xl_flags & XL_FLAG_EEPROM_OFFSET_30) 568 off += 0x30; 569 570 for (i = 0; i < cnt; i++) { 571 if (sc->xl_flags & XL_FLAG_8BITROM) 572 CSR_WRITE_2(sc, XL_W0_EE_CMD, 573 XL_EE_8BIT_READ | EEPROM_8BIT_OFFSET(off + i)); 574 else 575 CSR_WRITE_2(sc, XL_W0_EE_CMD, 576 XL_EE_READ | EEPROM_5BIT_OFFSET(off + i)); 577 err = xl_eeprom_wait(sc); 578 if (err) 579 break; 580 word = CSR_READ_2(sc, XL_W0_EE_DATA); 581 ptr = (u_int16_t *)(dest + (i * 2)); 582 if (swap) 583 *ptr = ntohs(word); 584 else 585 *ptr = word; 586 } 587 588 return (err ? 1 : 0); 589 } 590 591 static void 592 xl_rxfilter(struct xl_softc *sc) 593 { 594 595 if (sc->xl_type == XL_TYPE_905B) 596 xl_rxfilter_90xB(sc); 597 else 598 xl_rxfilter_90x(sc); 599 } 600 601 /* 602 * NICs older than the 3c905B have only one multicast option, which 603 * is to enable reception of all multicast frames. 604 */ 605 static void 606 xl_rxfilter_90x(struct xl_softc *sc) 607 { 608 struct ifnet *ifp; 609 struct ifmultiaddr *ifma; 610 u_int8_t rxfilt; 611 612 XL_LOCK_ASSERT(sc); 613 614 ifp = sc->xl_ifp; 615 616 XL_SEL_WIN(5); 617 rxfilt = CSR_READ_1(sc, XL_W5_RX_FILTER); 618 rxfilt &= ~(XL_RXFILTER_ALLFRAMES | XL_RXFILTER_ALLMULTI | 619 XL_RXFILTER_BROADCAST | XL_RXFILTER_INDIVIDUAL); 620 621 /* Set the individual bit to receive frames for this host only. */ 622 rxfilt |= XL_RXFILTER_INDIVIDUAL; 623 /* Set capture broadcast bit to capture broadcast frames. */ 624 if (ifp->if_flags & IFF_BROADCAST) 625 rxfilt |= XL_RXFILTER_BROADCAST; 626 627 /* If we want promiscuous mode, set the allframes bit. */ 628 if (ifp->if_flags & (IFF_PROMISC | IFF_ALLMULTI)) { 629 if (ifp->if_flags & IFF_PROMISC) 630 rxfilt |= XL_RXFILTER_ALLFRAMES; 631 if (ifp->if_flags & IFF_ALLMULTI) 632 rxfilt |= XL_RXFILTER_ALLMULTI; 633 } else { 634 if_maddr_rlock(ifp); 635 TAILQ_FOREACH(ifma, &ifp->if_multiaddrs, ifma_link) { 636 if (ifma->ifma_addr->sa_family != AF_LINK) 637 continue; 638 rxfilt |= XL_RXFILTER_ALLMULTI; 639 break; 640 } 641 if_maddr_runlock(ifp); 642 } 643 644 CSR_WRITE_2(sc, XL_COMMAND, rxfilt | XL_CMD_RX_SET_FILT); 645 XL_SEL_WIN(7); 646 } 647 648 /* 649 * 3c905B adapters have a hash filter that we can program. 650 */ 651 static void 652 xl_rxfilter_90xB(struct xl_softc *sc) 653 { 654 struct ifnet *ifp; 655 struct ifmultiaddr *ifma; 656 int i, mcnt; 657 u_int16_t h; 658 u_int8_t rxfilt; 659 660 XL_LOCK_ASSERT(sc); 661 662 ifp = sc->xl_ifp; 663 664 XL_SEL_WIN(5); 665 rxfilt = CSR_READ_1(sc, XL_W5_RX_FILTER); 666 rxfilt &= ~(XL_RXFILTER_ALLFRAMES | XL_RXFILTER_ALLMULTI | 667 XL_RXFILTER_BROADCAST | XL_RXFILTER_INDIVIDUAL | 668 XL_RXFILTER_MULTIHASH); 669 670 /* Set the individual bit to receive frames for this host only. */ 671 rxfilt |= XL_RXFILTER_INDIVIDUAL; 672 /* Set capture broadcast bit to capture broadcast frames. */ 673 if (ifp->if_flags & IFF_BROADCAST) 674 rxfilt |= XL_RXFILTER_BROADCAST; 675 676 /* If we want promiscuous mode, set the allframes bit. */ 677 if (ifp->if_flags & (IFF_PROMISC | IFF_ALLMULTI)) { 678 if (ifp->if_flags & IFF_PROMISC) 679 rxfilt |= XL_RXFILTER_ALLFRAMES; 680 if (ifp->if_flags & IFF_ALLMULTI) 681 rxfilt |= XL_RXFILTER_ALLMULTI; 682 } else { 683 /* First, zot all the existing hash bits. */ 684 for (i = 0; i < XL_HASHFILT_SIZE; i++) 685 CSR_WRITE_2(sc, XL_COMMAND, XL_CMD_RX_SET_HASH | i); 686 687 /* Now program new ones. */ 688 mcnt = 0; 689 if_maddr_rlock(ifp); 690 TAILQ_FOREACH(ifma, &ifp->if_multiaddrs, ifma_link) { 691 if (ifma->ifma_addr->sa_family != AF_LINK) 692 continue; 693 /* 694 * Note: the 3c905B currently only supports a 64-bit 695 * hash table, which means we really only need 6 bits, 696 * but the manual indicates that future chip revisions 697 * will have a 256-bit hash table, hence the routine 698 * is set up to calculate 8 bits of position info in 699 * case we need it some day. 700 * Note II, The Sequel: _CURRENT_ versions of the 701 * 3c905B have a 256 bit hash table. This means we have 702 * to use all 8 bits regardless. On older cards, the 703 * upper 2 bits will be ignored. Grrrr.... 704 */ 705 h = ether_crc32_be(LLADDR((struct sockaddr_dl *) 706 ifma->ifma_addr), ETHER_ADDR_LEN) & 0xFF; 707 CSR_WRITE_2(sc, XL_COMMAND, 708 h | XL_CMD_RX_SET_HASH | XL_HASH_SET); 709 mcnt++; 710 } 711 if_maddr_runlock(ifp); 712 if (mcnt > 0) 713 rxfilt |= XL_RXFILTER_MULTIHASH; 714 } 715 716 CSR_WRITE_2(sc, XL_COMMAND, rxfilt | XL_CMD_RX_SET_FILT); 717 XL_SEL_WIN(7); 718 } 719 720 static void 721 xl_setcfg(struct xl_softc *sc) 722 { 723 u_int32_t icfg; 724 725 /*XL_LOCK_ASSERT(sc);*/ 726 727 XL_SEL_WIN(3); 728 icfg = CSR_READ_4(sc, XL_W3_INTERNAL_CFG); 729 icfg &= ~XL_ICFG_CONNECTOR_MASK; 730 if (sc->xl_media & XL_MEDIAOPT_MII || 731 sc->xl_media & XL_MEDIAOPT_BT4) 732 icfg |= (XL_XCVR_MII << XL_ICFG_CONNECTOR_BITS); 733 if (sc->xl_media & XL_MEDIAOPT_BTX) 734 icfg |= (XL_XCVR_AUTO << XL_ICFG_CONNECTOR_BITS); 735 736 CSR_WRITE_4(sc, XL_W3_INTERNAL_CFG, icfg); 737 CSR_WRITE_2(sc, XL_COMMAND, XL_CMD_COAX_STOP); 738 } 739 740 static void 741 xl_setmode(struct xl_softc *sc, int media) 742 { 743 u_int32_t icfg; 744 u_int16_t mediastat; 745 char *pmsg = "", *dmsg = ""; 746 747 XL_LOCK_ASSERT(sc); 748 749 XL_SEL_WIN(4); 750 mediastat = CSR_READ_2(sc, XL_W4_MEDIA_STATUS); 751 XL_SEL_WIN(3); 752 icfg = CSR_READ_4(sc, XL_W3_INTERNAL_CFG); 753 754 if (sc->xl_media & XL_MEDIAOPT_BT) { 755 if (IFM_SUBTYPE(media) == IFM_10_T) { 756 pmsg = "10baseT transceiver"; 757 sc->xl_xcvr = XL_XCVR_10BT; 758 icfg &= ~XL_ICFG_CONNECTOR_MASK; 759 icfg |= (XL_XCVR_10BT << XL_ICFG_CONNECTOR_BITS); 760 mediastat |= XL_MEDIASTAT_LINKBEAT | 761 XL_MEDIASTAT_JABGUARD; 762 mediastat &= ~XL_MEDIASTAT_SQEENB; 763 } 764 } 765 766 if (sc->xl_media & XL_MEDIAOPT_BFX) { 767 if (IFM_SUBTYPE(media) == IFM_100_FX) { 768 pmsg = "100baseFX port"; 769 sc->xl_xcvr = XL_XCVR_100BFX; 770 icfg &= ~XL_ICFG_CONNECTOR_MASK; 771 icfg |= (XL_XCVR_100BFX << XL_ICFG_CONNECTOR_BITS); 772 mediastat |= XL_MEDIASTAT_LINKBEAT; 773 mediastat &= ~XL_MEDIASTAT_SQEENB; 774 } 775 } 776 777 if (sc->xl_media & (XL_MEDIAOPT_AUI|XL_MEDIAOPT_10FL)) { 778 if (IFM_SUBTYPE(media) == IFM_10_5) { 779 pmsg = "AUI port"; 780 sc->xl_xcvr = XL_XCVR_AUI; 781 icfg &= ~XL_ICFG_CONNECTOR_MASK; 782 icfg |= (XL_XCVR_AUI << XL_ICFG_CONNECTOR_BITS); 783 mediastat &= ~(XL_MEDIASTAT_LINKBEAT | 784 XL_MEDIASTAT_JABGUARD); 785 mediastat |= ~XL_MEDIASTAT_SQEENB; 786 } 787 if (IFM_SUBTYPE(media) == IFM_10_FL) { 788 pmsg = "10baseFL transceiver"; 789 sc->xl_xcvr = XL_XCVR_AUI; 790 icfg &= ~XL_ICFG_CONNECTOR_MASK; 791 icfg |= (XL_XCVR_AUI << XL_ICFG_CONNECTOR_BITS); 792 mediastat &= ~(XL_MEDIASTAT_LINKBEAT | 793 XL_MEDIASTAT_JABGUARD); 794 mediastat |= ~XL_MEDIASTAT_SQEENB; 795 } 796 } 797 798 if (sc->xl_media & XL_MEDIAOPT_BNC) { 799 if (IFM_SUBTYPE(media) == IFM_10_2) { 800 pmsg = "AUI port"; 801 sc->xl_xcvr = XL_XCVR_COAX; 802 icfg &= ~XL_ICFG_CONNECTOR_MASK; 803 icfg |= (XL_XCVR_COAX << XL_ICFG_CONNECTOR_BITS); 804 mediastat &= ~(XL_MEDIASTAT_LINKBEAT | 805 XL_MEDIASTAT_JABGUARD | XL_MEDIASTAT_SQEENB); 806 } 807 } 808 809 if ((media & IFM_GMASK) == IFM_FDX || 810 IFM_SUBTYPE(media) == IFM_100_FX) { 811 dmsg = "full"; 812 XL_SEL_WIN(3); 813 CSR_WRITE_1(sc, XL_W3_MAC_CTRL, XL_MACCTRL_DUPLEX); 814 } else { 815 dmsg = "half"; 816 XL_SEL_WIN(3); 817 CSR_WRITE_1(sc, XL_W3_MAC_CTRL, 818 (CSR_READ_1(sc, XL_W3_MAC_CTRL) & ~XL_MACCTRL_DUPLEX)); 819 } 820 821 if (IFM_SUBTYPE(media) == IFM_10_2) 822 CSR_WRITE_2(sc, XL_COMMAND, XL_CMD_COAX_START); 823 else 824 CSR_WRITE_2(sc, XL_COMMAND, XL_CMD_COAX_STOP); 825 826 CSR_WRITE_4(sc, XL_W3_INTERNAL_CFG, icfg); 827 XL_SEL_WIN(4); 828 CSR_WRITE_2(sc, XL_W4_MEDIA_STATUS, mediastat); 829 830 DELAY(800); 831 XL_SEL_WIN(7); 832 833 device_printf(sc->xl_dev, "selecting %s, %s duplex\n", pmsg, dmsg); 834 } 835 836 static void 837 xl_reset(struct xl_softc *sc) 838 { 839 int i; 840 841 XL_LOCK_ASSERT(sc); 842 843 XL_SEL_WIN(0); 844 CSR_WRITE_2(sc, XL_COMMAND, XL_CMD_RESET | 845 ((sc->xl_flags & XL_FLAG_WEIRDRESET) ? 846 XL_RESETOPT_DISADVFD:0)); 847 848 /* 849 * If we're using memory mapped register mode, pause briefly 850 * after issuing the reset command before trying to access any 851 * other registers. With my 3c575C CardBus card, failing to do 852 * this results in the system locking up while trying to poll 853 * the command busy bit in the status register. 854 */ 855 if (sc->xl_flags & XL_FLAG_USE_MMIO) 856 DELAY(100000); 857 858 for (i = 0; i < XL_TIMEOUT; i++) { 859 DELAY(10); 860 if (!(CSR_READ_2(sc, XL_STATUS) & XL_STAT_CMDBUSY)) 861 break; 862 } 863 864 if (i == XL_TIMEOUT) 865 device_printf(sc->xl_dev, "reset didn't complete\n"); 866 867 /* Reset TX and RX. */ 868 /* Note: the RX reset takes an absurd amount of time 869 * on newer versions of the Tornado chips such as those 870 * on the 3c905CX and newer 3c908C cards. We wait an 871 * extra amount of time so that xl_wait() doesn't complain 872 * and annoy the users. 873 */ 874 CSR_WRITE_2(sc, XL_COMMAND, XL_CMD_RX_RESET); 875 DELAY(100000); 876 xl_wait(sc); 877 CSR_WRITE_2(sc, XL_COMMAND, XL_CMD_TX_RESET); 878 xl_wait(sc); 879 880 if (sc->xl_flags & XL_FLAG_INVERT_LED_PWR || 881 sc->xl_flags & XL_FLAG_INVERT_MII_PWR) { 882 XL_SEL_WIN(2); 883 CSR_WRITE_2(sc, XL_W2_RESET_OPTIONS, 884 CSR_READ_2(sc, XL_W2_RESET_OPTIONS) | 885 ((sc->xl_flags & XL_FLAG_INVERT_LED_PWR) ? 886 XL_RESETOPT_INVERT_LED : 0) | 887 ((sc->xl_flags & XL_FLAG_INVERT_MII_PWR) ? 888 XL_RESETOPT_INVERT_MII : 0)); 889 } 890 891 /* Wait a little while for the chip to get its brains in order. */ 892 DELAY(100000); 893 } 894 895 /* 896 * Probe for a 3Com Etherlink XL chip. Check the PCI vendor and device 897 * IDs against our list and return a device name if we find a match. 898 */ 899 static int 900 xl_probe(device_t dev) 901 { 902 const struct xl_type *t; 903 904 t = xl_devs; 905 906 while (t->xl_name != NULL) { 907 if ((pci_get_vendor(dev) == t->xl_vid) && 908 (pci_get_device(dev) == t->xl_did)) { 909 device_set_desc(dev, t->xl_name); 910 return (BUS_PROBE_DEFAULT); 911 } 912 t++; 913 } 914 915 return (ENXIO); 916 } 917 918 /* 919 * This routine is a kludge to work around possible hardware faults 920 * or manufacturing defects that can cause the media options register 921 * (or reset options register, as it's called for the first generation 922 * 3c90x adapters) to return an incorrect result. I have encountered 923 * one Dell Latitude laptop docking station with an integrated 3c905-TX 924 * which doesn't have any of the 'mediaopt' bits set. This screws up 925 * the attach routine pretty badly because it doesn't know what media 926 * to look for. If we find ourselves in this predicament, this routine 927 * will try to guess the media options values and warn the user of a 928 * possible manufacturing defect with his adapter/system/whatever. 929 */ 930 static void 931 xl_mediacheck(struct xl_softc *sc) 932 { 933 934 /* 935 * If some of the media options bits are set, assume they are 936 * correct. If not, try to figure it out down below. 937 * XXX I should check for 10baseFL, but I don't have an adapter 938 * to test with. 939 */ 940 if (sc->xl_media & (XL_MEDIAOPT_MASK & ~XL_MEDIAOPT_VCO)) { 941 /* 942 * Check the XCVR value. If it's not in the normal range 943 * of values, we need to fake it up here. 944 */ 945 if (sc->xl_xcvr <= XL_XCVR_AUTO) 946 return; 947 else { 948 device_printf(sc->xl_dev, 949 "bogus xcvr value in EEPROM (%x)\n", sc->xl_xcvr); 950 device_printf(sc->xl_dev, 951 "choosing new default based on card type\n"); 952 } 953 } else { 954 if (sc->xl_type == XL_TYPE_905B && 955 sc->xl_media & XL_MEDIAOPT_10FL) 956 return; 957 device_printf(sc->xl_dev, 958 "WARNING: no media options bits set in the media options register!!\n"); 959 device_printf(sc->xl_dev, 960 "this could be a manufacturing defect in your adapter or system\n"); 961 device_printf(sc->xl_dev, 962 "attempting to guess media type; you should probably consult your vendor\n"); 963 } 964 965 xl_choose_xcvr(sc, 1); 966 } 967 968 static void 969 xl_choose_xcvr(struct xl_softc *sc, int verbose) 970 { 971 u_int16_t devid; 972 973 /* 974 * Read the device ID from the EEPROM. 975 * This is what's loaded into the PCI device ID register, so it has 976 * to be correct otherwise we wouldn't have gotten this far. 977 */ 978 xl_read_eeprom(sc, (caddr_t)&devid, XL_EE_PRODID, 1, 0); 979 980 switch (devid) { 981 case TC_DEVICEID_BOOMERANG_10BT: /* 3c900-TPO */ 982 case TC_DEVICEID_KRAKATOA_10BT: /* 3c900B-TPO */ 983 sc->xl_media = XL_MEDIAOPT_BT; 984 sc->xl_xcvr = XL_XCVR_10BT; 985 if (verbose) 986 device_printf(sc->xl_dev, 987 "guessing 10BaseT transceiver\n"); 988 break; 989 case TC_DEVICEID_BOOMERANG_10BT_COMBO: /* 3c900-COMBO */ 990 case TC_DEVICEID_KRAKATOA_10BT_COMBO: /* 3c900B-COMBO */ 991 sc->xl_media = XL_MEDIAOPT_BT|XL_MEDIAOPT_BNC|XL_MEDIAOPT_AUI; 992 sc->xl_xcvr = XL_XCVR_10BT; 993 if (verbose) 994 device_printf(sc->xl_dev, 995 "guessing COMBO (AUI/BNC/TP)\n"); 996 break; 997 case TC_DEVICEID_KRAKATOA_10BT_TPC: /* 3c900B-TPC */ 998 sc->xl_media = XL_MEDIAOPT_BT|XL_MEDIAOPT_BNC; 999 sc->xl_xcvr = XL_XCVR_10BT; 1000 if (verbose) 1001 device_printf(sc->xl_dev, "guessing TPC (BNC/TP)\n"); 1002 break; 1003 case TC_DEVICEID_CYCLONE_10FL: /* 3c900B-FL */ 1004 sc->xl_media = XL_MEDIAOPT_10FL; 1005 sc->xl_xcvr = XL_XCVR_AUI; 1006 if (verbose) 1007 device_printf(sc->xl_dev, "guessing 10baseFL\n"); 1008 break; 1009 case TC_DEVICEID_BOOMERANG_10_100BT: /* 3c905-TX */ 1010 case TC_DEVICEID_HURRICANE_555: /* 3c555 */ 1011 case TC_DEVICEID_HURRICANE_556: /* 3c556 */ 1012 case TC_DEVICEID_HURRICANE_556B: /* 3c556B */ 1013 case TC_DEVICEID_HURRICANE_575A: /* 3c575TX */ 1014 case TC_DEVICEID_HURRICANE_575B: /* 3c575B */ 1015 case TC_DEVICEID_HURRICANE_575C: /* 3c575C */ 1016 case TC_DEVICEID_HURRICANE_656: /* 3c656 */ 1017 case TC_DEVICEID_HURRICANE_656B: /* 3c656B */ 1018 case TC_DEVICEID_TORNADO_656C: /* 3c656C */ 1019 case TC_DEVICEID_TORNADO_10_100BT_920B: /* 3c920B-EMB */ 1020 case TC_DEVICEID_TORNADO_10_100BT_920B_WNM: /* 3c920B-EMB-WNM */ 1021 sc->xl_media = XL_MEDIAOPT_MII; 1022 sc->xl_xcvr = XL_XCVR_MII; 1023 if (verbose) 1024 device_printf(sc->xl_dev, "guessing MII\n"); 1025 break; 1026 case TC_DEVICEID_BOOMERANG_100BT4: /* 3c905-T4 */ 1027 case TC_DEVICEID_CYCLONE_10_100BT4: /* 3c905B-T4 */ 1028 sc->xl_media = XL_MEDIAOPT_BT4; 1029 sc->xl_xcvr = XL_XCVR_MII; 1030 if (verbose) 1031 device_printf(sc->xl_dev, "guessing 100baseT4/MII\n"); 1032 break; 1033 case TC_DEVICEID_HURRICANE_10_100BT: /* 3c905B-TX */ 1034 case TC_DEVICEID_HURRICANE_10_100BT_SERV:/*3c980-TX */ 1035 case TC_DEVICEID_TORNADO_10_100BT_SERV: /* 3c980C-TX */ 1036 case TC_DEVICEID_HURRICANE_SOHO100TX: /* 3cSOHO100-TX */ 1037 case TC_DEVICEID_TORNADO_10_100BT: /* 3c905C-TX */ 1038 case TC_DEVICEID_TORNADO_HOMECONNECT: /* 3c450-TX */ 1039 sc->xl_media = XL_MEDIAOPT_BTX; 1040 sc->xl_xcvr = XL_XCVR_AUTO; 1041 if (verbose) 1042 device_printf(sc->xl_dev, "guessing 10/100 internal\n"); 1043 break; 1044 case TC_DEVICEID_CYCLONE_10_100_COMBO: /* 3c905B-COMBO */ 1045 sc->xl_media = XL_MEDIAOPT_BTX|XL_MEDIAOPT_BNC|XL_MEDIAOPT_AUI; 1046 sc->xl_xcvr = XL_XCVR_AUTO; 1047 if (verbose) 1048 device_printf(sc->xl_dev, 1049 "guessing 10/100 plus BNC/AUI\n"); 1050 break; 1051 default: 1052 device_printf(sc->xl_dev, 1053 "unknown device ID: %x -- defaulting to 10baseT\n", devid); 1054 sc->xl_media = XL_MEDIAOPT_BT; 1055 break; 1056 } 1057 } 1058 1059 /* 1060 * Attach the interface. Allocate softc structures, do ifmedia 1061 * setup and ethernet/BPF attach. 1062 */ 1063 static int 1064 xl_attach(device_t dev) 1065 { 1066 u_char eaddr[ETHER_ADDR_LEN]; 1067 u_int16_t sinfo2, xcvr[2]; 1068 struct xl_softc *sc; 1069 struct ifnet *ifp; 1070 int media, pmcap; 1071 int error = 0, phy, rid, res, unit; 1072 uint16_t did; 1073 1074 sc = device_get_softc(dev); 1075 sc->xl_dev = dev; 1076 1077 unit = device_get_unit(dev); 1078 1079 mtx_init(&sc->xl_mtx, device_get_nameunit(dev), MTX_NETWORK_LOCK, 1080 MTX_DEF); 1081 ifmedia_init(&sc->ifmedia, 0, xl_ifmedia_upd, xl_ifmedia_sts); 1082 1083 did = pci_get_device(dev); 1084 1085 sc->xl_flags = 0; 1086 if (did == TC_DEVICEID_HURRICANE_555) 1087 sc->xl_flags |= XL_FLAG_EEPROM_OFFSET_30 | XL_FLAG_PHYOK; 1088 if (did == TC_DEVICEID_HURRICANE_556 || 1089 did == TC_DEVICEID_HURRICANE_556B) 1090 sc->xl_flags |= XL_FLAG_FUNCREG | XL_FLAG_PHYOK | 1091 XL_FLAG_EEPROM_OFFSET_30 | XL_FLAG_WEIRDRESET | 1092 XL_FLAG_INVERT_LED_PWR | XL_FLAG_INVERT_MII_PWR; 1093 if (did == TC_DEVICEID_HURRICANE_555 || 1094 did == TC_DEVICEID_HURRICANE_556) 1095 sc->xl_flags |= XL_FLAG_8BITROM; 1096 if (did == TC_DEVICEID_HURRICANE_556B) 1097 sc->xl_flags |= XL_FLAG_NO_XCVR_PWR; 1098 1099 if (did == TC_DEVICEID_HURRICANE_575B || 1100 did == TC_DEVICEID_HURRICANE_575C || 1101 did == TC_DEVICEID_HURRICANE_656B || 1102 did == TC_DEVICEID_TORNADO_656C) 1103 sc->xl_flags |= XL_FLAG_FUNCREG; 1104 if (did == TC_DEVICEID_HURRICANE_575A || 1105 did == TC_DEVICEID_HURRICANE_575B || 1106 did == TC_DEVICEID_HURRICANE_575C || 1107 did == TC_DEVICEID_HURRICANE_656B || 1108 did == TC_DEVICEID_TORNADO_656C) 1109 sc->xl_flags |= XL_FLAG_PHYOK | XL_FLAG_EEPROM_OFFSET_30 | 1110 XL_FLAG_8BITROM; 1111 if (did == TC_DEVICEID_HURRICANE_656) 1112 sc->xl_flags |= XL_FLAG_FUNCREG | XL_FLAG_PHYOK; 1113 if (did == TC_DEVICEID_HURRICANE_575B) 1114 sc->xl_flags |= XL_FLAG_INVERT_LED_PWR; 1115 if (did == TC_DEVICEID_HURRICANE_575C) 1116 sc->xl_flags |= XL_FLAG_INVERT_MII_PWR; 1117 if (did == TC_DEVICEID_TORNADO_656C) 1118 sc->xl_flags |= XL_FLAG_INVERT_MII_PWR; 1119 if (did == TC_DEVICEID_HURRICANE_656 || 1120 did == TC_DEVICEID_HURRICANE_656B) 1121 sc->xl_flags |= XL_FLAG_INVERT_MII_PWR | 1122 XL_FLAG_INVERT_LED_PWR; 1123 if (did == TC_DEVICEID_TORNADO_10_100BT_920B || 1124 did == TC_DEVICEID_TORNADO_10_100BT_920B_WNM) 1125 sc->xl_flags |= XL_FLAG_PHYOK; 1126 1127 switch (did) { 1128 case TC_DEVICEID_BOOMERANG_10_100BT: /* 3c905-TX */ 1129 case TC_DEVICEID_HURRICANE_575A: 1130 case TC_DEVICEID_HURRICANE_575B: 1131 case TC_DEVICEID_HURRICANE_575C: 1132 sc->xl_flags |= XL_FLAG_NO_MMIO; 1133 break; 1134 default: 1135 break; 1136 } 1137 1138 /* 1139 * Map control/status registers. 1140 */ 1141 pci_enable_busmaster(dev); 1142 1143 if ((sc->xl_flags & XL_FLAG_NO_MMIO) == 0) { 1144 rid = XL_PCI_LOMEM; 1145 res = SYS_RES_MEMORY; 1146 1147 sc->xl_res = bus_alloc_resource_any(dev, res, &rid, RF_ACTIVE); 1148 } 1149 1150 if (sc->xl_res != NULL) { 1151 sc->xl_flags |= XL_FLAG_USE_MMIO; 1152 if (bootverbose) 1153 device_printf(dev, "using memory mapped I/O\n"); 1154 } else { 1155 rid = XL_PCI_LOIO; 1156 res = SYS_RES_IOPORT; 1157 sc->xl_res = bus_alloc_resource_any(dev, res, &rid, RF_ACTIVE); 1158 if (sc->xl_res == NULL) { 1159 device_printf(dev, "couldn't map ports/memory\n"); 1160 error = ENXIO; 1161 goto fail; 1162 } 1163 if (bootverbose) 1164 device_printf(dev, "using port I/O\n"); 1165 } 1166 1167 sc->xl_btag = rman_get_bustag(sc->xl_res); 1168 sc->xl_bhandle = rman_get_bushandle(sc->xl_res); 1169 1170 if (sc->xl_flags & XL_FLAG_FUNCREG) { 1171 rid = XL_PCI_FUNCMEM; 1172 sc->xl_fres = bus_alloc_resource_any(dev, SYS_RES_MEMORY, &rid, 1173 RF_ACTIVE); 1174 1175 if (sc->xl_fres == NULL) { 1176 device_printf(dev, "couldn't map funcreg memory\n"); 1177 error = ENXIO; 1178 goto fail; 1179 } 1180 1181 sc->xl_ftag = rman_get_bustag(sc->xl_fres); 1182 sc->xl_fhandle = rman_get_bushandle(sc->xl_fres); 1183 } 1184 1185 /* Allocate interrupt */ 1186 rid = 0; 1187 sc->xl_irq = bus_alloc_resource_any(dev, SYS_RES_IRQ, &rid, 1188 RF_SHAREABLE | RF_ACTIVE); 1189 if (sc->xl_irq == NULL) { 1190 device_printf(dev, "couldn't map interrupt\n"); 1191 error = ENXIO; 1192 goto fail; 1193 } 1194 1195 /* Initialize interface name. */ 1196 ifp = sc->xl_ifp = if_alloc(IFT_ETHER); 1197 if (ifp == NULL) { 1198 device_printf(dev, "can not if_alloc()\n"); 1199 error = ENOSPC; 1200 goto fail; 1201 } 1202 ifp->if_softc = sc; 1203 if_initname(ifp, device_get_name(dev), device_get_unit(dev)); 1204 1205 /* Reset the adapter. */ 1206 XL_LOCK(sc); 1207 xl_reset(sc); 1208 XL_UNLOCK(sc); 1209 1210 /* 1211 * Get station address from the EEPROM. 1212 */ 1213 if (xl_read_eeprom(sc, (caddr_t)&eaddr, XL_EE_OEM_ADR0, 3, 1)) { 1214 device_printf(dev, "failed to read station address\n"); 1215 error = ENXIO; 1216 goto fail; 1217 } 1218 1219 callout_init_mtx(&sc->xl_tick_callout, &sc->xl_mtx, 0); 1220 TASK_INIT(&sc->xl_task, 0, xl_rxeof_task, sc); 1221 1222 /* 1223 * Now allocate a tag for the DMA descriptor lists and a chunk 1224 * of DMA-able memory based on the tag. Also obtain the DMA 1225 * addresses of the RX and TX ring, which we'll need later. 1226 * All of our lists are allocated as a contiguous block 1227 * of memory. 1228 */ 1229 error = bus_dma_tag_create(bus_get_dma_tag(dev), 8, 0, 1230 BUS_SPACE_MAXADDR_32BIT, BUS_SPACE_MAXADDR, NULL, NULL, 1231 XL_RX_LIST_SZ, 1, XL_RX_LIST_SZ, 0, NULL, NULL, 1232 &sc->xl_ldata.xl_rx_tag); 1233 if (error) { 1234 device_printf(dev, "failed to allocate rx dma tag\n"); 1235 goto fail; 1236 } 1237 1238 error = bus_dmamem_alloc(sc->xl_ldata.xl_rx_tag, 1239 (void **)&sc->xl_ldata.xl_rx_list, BUS_DMA_NOWAIT | 1240 BUS_DMA_COHERENT | BUS_DMA_ZERO, &sc->xl_ldata.xl_rx_dmamap); 1241 if (error) { 1242 device_printf(dev, "no memory for rx list buffers!\n"); 1243 bus_dma_tag_destroy(sc->xl_ldata.xl_rx_tag); 1244 sc->xl_ldata.xl_rx_tag = NULL; 1245 goto fail; 1246 } 1247 1248 error = bus_dmamap_load(sc->xl_ldata.xl_rx_tag, 1249 sc->xl_ldata.xl_rx_dmamap, sc->xl_ldata.xl_rx_list, 1250 XL_RX_LIST_SZ, xl_dma_map_addr, 1251 &sc->xl_ldata.xl_rx_dmaaddr, BUS_DMA_NOWAIT); 1252 if (error) { 1253 device_printf(dev, "cannot get dma address of the rx ring!\n"); 1254 bus_dmamem_free(sc->xl_ldata.xl_rx_tag, sc->xl_ldata.xl_rx_list, 1255 sc->xl_ldata.xl_rx_dmamap); 1256 bus_dma_tag_destroy(sc->xl_ldata.xl_rx_tag); 1257 sc->xl_ldata.xl_rx_tag = NULL; 1258 goto fail; 1259 } 1260 1261 error = bus_dma_tag_create(bus_get_dma_tag(dev), 8, 0, 1262 BUS_SPACE_MAXADDR_32BIT, BUS_SPACE_MAXADDR, NULL, NULL, 1263 XL_TX_LIST_SZ, 1, XL_TX_LIST_SZ, 0, NULL, NULL, 1264 &sc->xl_ldata.xl_tx_tag); 1265 if (error) { 1266 device_printf(dev, "failed to allocate tx dma tag\n"); 1267 goto fail; 1268 } 1269 1270 error = bus_dmamem_alloc(sc->xl_ldata.xl_tx_tag, 1271 (void **)&sc->xl_ldata.xl_tx_list, BUS_DMA_NOWAIT | 1272 BUS_DMA_COHERENT | BUS_DMA_ZERO, &sc->xl_ldata.xl_tx_dmamap); 1273 if (error) { 1274 device_printf(dev, "no memory for list buffers!\n"); 1275 bus_dma_tag_destroy(sc->xl_ldata.xl_tx_tag); 1276 sc->xl_ldata.xl_tx_tag = NULL; 1277 goto fail; 1278 } 1279 1280 error = bus_dmamap_load(sc->xl_ldata.xl_tx_tag, 1281 sc->xl_ldata.xl_tx_dmamap, sc->xl_ldata.xl_tx_list, 1282 XL_TX_LIST_SZ, xl_dma_map_addr, 1283 &sc->xl_ldata.xl_tx_dmaaddr, BUS_DMA_NOWAIT); 1284 if (error) { 1285 device_printf(dev, "cannot get dma address of the tx ring!\n"); 1286 bus_dmamem_free(sc->xl_ldata.xl_tx_tag, sc->xl_ldata.xl_tx_list, 1287 sc->xl_ldata.xl_tx_dmamap); 1288 bus_dma_tag_destroy(sc->xl_ldata.xl_tx_tag); 1289 sc->xl_ldata.xl_tx_tag = NULL; 1290 goto fail; 1291 } 1292 1293 /* 1294 * Allocate a DMA tag for the mapping of mbufs. 1295 */ 1296 error = bus_dma_tag_create(bus_get_dma_tag(dev), 1, 0, 1297 BUS_SPACE_MAXADDR_32BIT, BUS_SPACE_MAXADDR, NULL, NULL, 1298 MCLBYTES * XL_MAXFRAGS, XL_MAXFRAGS, MCLBYTES, 0, NULL, 1299 NULL, &sc->xl_mtag); 1300 if (error) { 1301 device_printf(dev, "failed to allocate mbuf dma tag\n"); 1302 goto fail; 1303 } 1304 1305 /* We need a spare DMA map for the RX ring. */ 1306 error = bus_dmamap_create(sc->xl_mtag, 0, &sc->xl_tmpmap); 1307 if (error) 1308 goto fail; 1309 1310 /* 1311 * Figure out the card type. 3c905B adapters have the 1312 * 'supportsNoTxLength' bit set in the capabilities 1313 * word in the EEPROM. 1314 * Note: my 3c575C CardBus card lies. It returns a value 1315 * of 0x1578 for its capabilities word, which is somewhat 1316 * nonsensical. Another way to distinguish a 3c90x chip 1317 * from a 3c90xB/C chip is to check for the 'supportsLargePackets' 1318 * bit. This will only be set for 3c90x boomerage chips. 1319 */ 1320 xl_read_eeprom(sc, (caddr_t)&sc->xl_caps, XL_EE_CAPS, 1, 0); 1321 if (sc->xl_caps & XL_CAPS_NO_TXLENGTH || 1322 !(sc->xl_caps & XL_CAPS_LARGE_PKTS)) 1323 sc->xl_type = XL_TYPE_905B; 1324 else 1325 sc->xl_type = XL_TYPE_90X; 1326 1327 /* Check availability of WOL. */ 1328 if ((sc->xl_caps & XL_CAPS_PWRMGMT) != 0 && 1329 pci_find_cap(dev, PCIY_PMG, &pmcap) == 0) { 1330 sc->xl_pmcap = pmcap; 1331 sc->xl_flags |= XL_FLAG_WOL; 1332 sinfo2 = 0; 1333 xl_read_eeprom(sc, (caddr_t)&sinfo2, XL_EE_SOFTINFO2, 1, 0); 1334 if ((sinfo2 & XL_SINFO2_AUX_WOL_CON) == 0 && bootverbose) 1335 device_printf(dev, 1336 "No auxiliary remote wakeup connector!\n"); 1337 } 1338 1339 /* Set the TX start threshold for best performance. */ 1340 sc->xl_tx_thresh = XL_MIN_FRAMELEN; 1341 1342 ifp->if_flags = IFF_BROADCAST | IFF_SIMPLEX | IFF_MULTICAST; 1343 ifp->if_ioctl = xl_ioctl; 1344 ifp->if_capabilities = IFCAP_VLAN_MTU; 1345 if (sc->xl_type == XL_TYPE_905B) { 1346 ifp->if_hwassist = XL905B_CSUM_FEATURES; 1347 #ifdef XL905B_TXCSUM_BROKEN 1348 ifp->if_capabilities |= IFCAP_RXCSUM; 1349 #else 1350 ifp->if_capabilities |= IFCAP_HWCSUM; 1351 #endif 1352 } 1353 if ((sc->xl_flags & XL_FLAG_WOL) != 0) 1354 ifp->if_capabilities |= IFCAP_WOL_MAGIC; 1355 ifp->if_capenable = ifp->if_capabilities; 1356 #ifdef DEVICE_POLLING 1357 ifp->if_capabilities |= IFCAP_POLLING; 1358 #endif 1359 ifp->if_start = xl_start; 1360 ifp->if_init = xl_init; 1361 IFQ_SET_MAXLEN(&ifp->if_snd, XL_TX_LIST_CNT - 1); 1362 ifp->if_snd.ifq_drv_maxlen = XL_TX_LIST_CNT - 1; 1363 IFQ_SET_READY(&ifp->if_snd); 1364 1365 /* 1366 * Now we have to see what sort of media we have. 1367 * This includes probing for an MII interace and a 1368 * possible PHY. 1369 */ 1370 XL_SEL_WIN(3); 1371 sc->xl_media = CSR_READ_2(sc, XL_W3_MEDIA_OPT); 1372 if (bootverbose) 1373 device_printf(dev, "media options word: %x\n", sc->xl_media); 1374 1375 xl_read_eeprom(sc, (char *)&xcvr, XL_EE_ICFG_0, 2, 0); 1376 sc->xl_xcvr = xcvr[0] | xcvr[1] << 16; 1377 sc->xl_xcvr &= XL_ICFG_CONNECTOR_MASK; 1378 sc->xl_xcvr >>= XL_ICFG_CONNECTOR_BITS; 1379 1380 xl_mediacheck(sc); 1381 1382 if (sc->xl_media & XL_MEDIAOPT_MII || 1383 sc->xl_media & XL_MEDIAOPT_BTX || 1384 sc->xl_media & XL_MEDIAOPT_BT4) { 1385 if (bootverbose) 1386 device_printf(dev, "found MII/AUTO\n"); 1387 xl_setcfg(sc); 1388 /* 1389 * Attach PHYs only at MII address 24 if !XL_FLAG_PHYOK. 1390 * This is to guard against problems with certain 3Com ASIC 1391 * revisions that incorrectly map the internal transceiver 1392 * control registers at all MII addresses. 1393 */ 1394 phy = MII_PHY_ANY; 1395 if ((sc->xl_flags & XL_FLAG_PHYOK) == 0) 1396 phy = 24; 1397 error = mii_attach(dev, &sc->xl_miibus, ifp, xl_ifmedia_upd, 1398 xl_ifmedia_sts, BMSR_DEFCAPMASK, phy, MII_OFFSET_ANY, 1399 sc->xl_type == XL_TYPE_905B ? MIIF_DOPAUSE : 0); 1400 if (error != 0) { 1401 device_printf(dev, "attaching PHYs failed\n"); 1402 goto fail; 1403 } 1404 goto done; 1405 } 1406 1407 /* 1408 * Sanity check. If the user has selected "auto" and this isn't 1409 * a 10/100 card of some kind, we need to force the transceiver 1410 * type to something sane. 1411 */ 1412 if (sc->xl_xcvr == XL_XCVR_AUTO) 1413 xl_choose_xcvr(sc, bootverbose); 1414 1415 /* 1416 * Do ifmedia setup. 1417 */ 1418 if (sc->xl_media & XL_MEDIAOPT_BT) { 1419 if (bootverbose) 1420 device_printf(dev, "found 10baseT\n"); 1421 ifmedia_add(&sc->ifmedia, IFM_ETHER|IFM_10_T, 0, NULL); 1422 ifmedia_add(&sc->ifmedia, IFM_ETHER|IFM_10_T|IFM_HDX, 0, NULL); 1423 if (sc->xl_caps & XL_CAPS_FULL_DUPLEX) 1424 ifmedia_add(&sc->ifmedia, 1425 IFM_ETHER|IFM_10_T|IFM_FDX, 0, NULL); 1426 } 1427 1428 if (sc->xl_media & (XL_MEDIAOPT_AUI|XL_MEDIAOPT_10FL)) { 1429 /* 1430 * Check for a 10baseFL board in disguise. 1431 */ 1432 if (sc->xl_type == XL_TYPE_905B && 1433 sc->xl_media == XL_MEDIAOPT_10FL) { 1434 if (bootverbose) 1435 device_printf(dev, "found 10baseFL\n"); 1436 ifmedia_add(&sc->ifmedia, IFM_ETHER|IFM_10_FL, 0, NULL); 1437 ifmedia_add(&sc->ifmedia, IFM_ETHER|IFM_10_FL|IFM_HDX, 1438 0, NULL); 1439 if (sc->xl_caps & XL_CAPS_FULL_DUPLEX) 1440 ifmedia_add(&sc->ifmedia, 1441 IFM_ETHER|IFM_10_FL|IFM_FDX, 0, NULL); 1442 } else { 1443 if (bootverbose) 1444 device_printf(dev, "found AUI\n"); 1445 ifmedia_add(&sc->ifmedia, IFM_ETHER|IFM_10_5, 0, NULL); 1446 } 1447 } 1448 1449 if (sc->xl_media & XL_MEDIAOPT_BNC) { 1450 if (bootverbose) 1451 device_printf(dev, "found BNC\n"); 1452 ifmedia_add(&sc->ifmedia, IFM_ETHER|IFM_10_2, 0, NULL); 1453 } 1454 1455 if (sc->xl_media & XL_MEDIAOPT_BFX) { 1456 if (bootverbose) 1457 device_printf(dev, "found 100baseFX\n"); 1458 ifmedia_add(&sc->ifmedia, IFM_ETHER|IFM_100_FX, 0, NULL); 1459 } 1460 1461 media = IFM_ETHER|IFM_100_TX|IFM_FDX; 1462 xl_choose_media(sc, &media); 1463 1464 if (sc->xl_miibus == NULL) 1465 ifmedia_set(&sc->ifmedia, media); 1466 1467 done: 1468 if (sc->xl_flags & XL_FLAG_NO_XCVR_PWR) { 1469 XL_SEL_WIN(0); 1470 CSR_WRITE_2(sc, XL_W0_MFG_ID, XL_NO_XCVR_PWR_MAGICBITS); 1471 } 1472 1473 /* 1474 * Call MI attach routine. 1475 */ 1476 ether_ifattach(ifp, eaddr); 1477 1478 error = bus_setup_intr(dev, sc->xl_irq, INTR_TYPE_NET | INTR_MPSAFE, 1479 NULL, xl_intr, sc, &sc->xl_intrhand); 1480 if (error) { 1481 device_printf(dev, "couldn't set up irq\n"); 1482 ether_ifdetach(ifp); 1483 goto fail; 1484 } 1485 1486 fail: 1487 if (error) 1488 xl_detach(dev); 1489 1490 return (error); 1491 } 1492 1493 /* 1494 * Choose a default media. 1495 * XXX This is a leaf function only called by xl_attach() and 1496 * acquires/releases the non-recursible driver mutex to 1497 * satisfy lock assertions. 1498 */ 1499 static void 1500 xl_choose_media(struct xl_softc *sc, int *media) 1501 { 1502 1503 XL_LOCK(sc); 1504 1505 switch (sc->xl_xcvr) { 1506 case XL_XCVR_10BT: 1507 *media = IFM_ETHER|IFM_10_T; 1508 xl_setmode(sc, *media); 1509 break; 1510 case XL_XCVR_AUI: 1511 if (sc->xl_type == XL_TYPE_905B && 1512 sc->xl_media == XL_MEDIAOPT_10FL) { 1513 *media = IFM_ETHER|IFM_10_FL; 1514 xl_setmode(sc, *media); 1515 } else { 1516 *media = IFM_ETHER|IFM_10_5; 1517 xl_setmode(sc, *media); 1518 } 1519 break; 1520 case XL_XCVR_COAX: 1521 *media = IFM_ETHER|IFM_10_2; 1522 xl_setmode(sc, *media); 1523 break; 1524 case XL_XCVR_AUTO: 1525 case XL_XCVR_100BTX: 1526 case XL_XCVR_MII: 1527 /* Chosen by miibus */ 1528 break; 1529 case XL_XCVR_100BFX: 1530 *media = IFM_ETHER|IFM_100_FX; 1531 break; 1532 default: 1533 device_printf(sc->xl_dev, "unknown XCVR type: %d\n", 1534 sc->xl_xcvr); 1535 /* 1536 * This will probably be wrong, but it prevents 1537 * the ifmedia code from panicking. 1538 */ 1539 *media = IFM_ETHER|IFM_10_T; 1540 break; 1541 } 1542 1543 XL_UNLOCK(sc); 1544 } 1545 1546 /* 1547 * Shutdown hardware and free up resources. This can be called any 1548 * time after the mutex has been initialized. It is called in both 1549 * the error case in attach and the normal detach case so it needs 1550 * to be careful about only freeing resources that have actually been 1551 * allocated. 1552 */ 1553 static int 1554 xl_detach(device_t dev) 1555 { 1556 struct xl_softc *sc; 1557 struct ifnet *ifp; 1558 int rid, res; 1559 1560 sc = device_get_softc(dev); 1561 ifp = sc->xl_ifp; 1562 1563 KASSERT(mtx_initialized(&sc->xl_mtx), ("xl mutex not initialized")); 1564 1565 #ifdef DEVICE_POLLING 1566 if (ifp && ifp->if_capenable & IFCAP_POLLING) 1567 ether_poll_deregister(ifp); 1568 #endif 1569 1570 if (sc->xl_flags & XL_FLAG_USE_MMIO) { 1571 rid = XL_PCI_LOMEM; 1572 res = SYS_RES_MEMORY; 1573 } else { 1574 rid = XL_PCI_LOIO; 1575 res = SYS_RES_IOPORT; 1576 } 1577 1578 /* These should only be active if attach succeeded */ 1579 if (device_is_attached(dev)) { 1580 XL_LOCK(sc); 1581 xl_stop(sc); 1582 XL_UNLOCK(sc); 1583 taskqueue_drain(taskqueue_swi, &sc->xl_task); 1584 callout_drain(&sc->xl_tick_callout); 1585 ether_ifdetach(ifp); 1586 } 1587 if (sc->xl_miibus) 1588 device_delete_child(dev, sc->xl_miibus); 1589 bus_generic_detach(dev); 1590 ifmedia_removeall(&sc->ifmedia); 1591 1592 if (sc->xl_intrhand) 1593 bus_teardown_intr(dev, sc->xl_irq, sc->xl_intrhand); 1594 if (sc->xl_irq) 1595 bus_release_resource(dev, SYS_RES_IRQ, 0, sc->xl_irq); 1596 if (sc->xl_fres != NULL) 1597 bus_release_resource(dev, SYS_RES_MEMORY, 1598 XL_PCI_FUNCMEM, sc->xl_fres); 1599 if (sc->xl_res) 1600 bus_release_resource(dev, res, rid, sc->xl_res); 1601 1602 if (ifp) 1603 if_free(ifp); 1604 1605 if (sc->xl_mtag) { 1606 bus_dmamap_destroy(sc->xl_mtag, sc->xl_tmpmap); 1607 bus_dma_tag_destroy(sc->xl_mtag); 1608 } 1609 if (sc->xl_ldata.xl_rx_tag) { 1610 bus_dmamap_unload(sc->xl_ldata.xl_rx_tag, 1611 sc->xl_ldata.xl_rx_dmamap); 1612 bus_dmamem_free(sc->xl_ldata.xl_rx_tag, sc->xl_ldata.xl_rx_list, 1613 sc->xl_ldata.xl_rx_dmamap); 1614 bus_dma_tag_destroy(sc->xl_ldata.xl_rx_tag); 1615 } 1616 if (sc->xl_ldata.xl_tx_tag) { 1617 bus_dmamap_unload(sc->xl_ldata.xl_tx_tag, 1618 sc->xl_ldata.xl_tx_dmamap); 1619 bus_dmamem_free(sc->xl_ldata.xl_tx_tag, sc->xl_ldata.xl_tx_list, 1620 sc->xl_ldata.xl_tx_dmamap); 1621 bus_dma_tag_destroy(sc->xl_ldata.xl_tx_tag); 1622 } 1623 1624 mtx_destroy(&sc->xl_mtx); 1625 1626 return (0); 1627 } 1628 1629 /* 1630 * Initialize the transmit descriptors. 1631 */ 1632 static int 1633 xl_list_tx_init(struct xl_softc *sc) 1634 { 1635 struct xl_chain_data *cd; 1636 struct xl_list_data *ld; 1637 int error, i; 1638 1639 XL_LOCK_ASSERT(sc); 1640 1641 cd = &sc->xl_cdata; 1642 ld = &sc->xl_ldata; 1643 for (i = 0; i < XL_TX_LIST_CNT; i++) { 1644 cd->xl_tx_chain[i].xl_ptr = &ld->xl_tx_list[i]; 1645 error = bus_dmamap_create(sc->xl_mtag, 0, 1646 &cd->xl_tx_chain[i].xl_map); 1647 if (error) 1648 return (error); 1649 cd->xl_tx_chain[i].xl_phys = ld->xl_tx_dmaaddr + 1650 i * sizeof(struct xl_list); 1651 if (i == (XL_TX_LIST_CNT - 1)) 1652 cd->xl_tx_chain[i].xl_next = NULL; 1653 else 1654 cd->xl_tx_chain[i].xl_next = &cd->xl_tx_chain[i + 1]; 1655 } 1656 1657 cd->xl_tx_free = &cd->xl_tx_chain[0]; 1658 cd->xl_tx_tail = cd->xl_tx_head = NULL; 1659 1660 bus_dmamap_sync(ld->xl_tx_tag, ld->xl_tx_dmamap, BUS_DMASYNC_PREWRITE); 1661 return (0); 1662 } 1663 1664 /* 1665 * Initialize the transmit descriptors. 1666 */ 1667 static int 1668 xl_list_tx_init_90xB(struct xl_softc *sc) 1669 { 1670 struct xl_chain_data *cd; 1671 struct xl_list_data *ld; 1672 int error, i; 1673 1674 XL_LOCK_ASSERT(sc); 1675 1676 cd = &sc->xl_cdata; 1677 ld = &sc->xl_ldata; 1678 for (i = 0; i < XL_TX_LIST_CNT; i++) { 1679 cd->xl_tx_chain[i].xl_ptr = &ld->xl_tx_list[i]; 1680 error = bus_dmamap_create(sc->xl_mtag, 0, 1681 &cd->xl_tx_chain[i].xl_map); 1682 if (error) 1683 return (error); 1684 cd->xl_tx_chain[i].xl_phys = ld->xl_tx_dmaaddr + 1685 i * sizeof(struct xl_list); 1686 if (i == (XL_TX_LIST_CNT - 1)) 1687 cd->xl_tx_chain[i].xl_next = &cd->xl_tx_chain[0]; 1688 else 1689 cd->xl_tx_chain[i].xl_next = &cd->xl_tx_chain[i + 1]; 1690 if (i == 0) 1691 cd->xl_tx_chain[i].xl_prev = 1692 &cd->xl_tx_chain[XL_TX_LIST_CNT - 1]; 1693 else 1694 cd->xl_tx_chain[i].xl_prev = 1695 &cd->xl_tx_chain[i - 1]; 1696 } 1697 1698 bzero(ld->xl_tx_list, XL_TX_LIST_SZ); 1699 ld->xl_tx_list[0].xl_status = htole32(XL_TXSTAT_EMPTY); 1700 1701 cd->xl_tx_prod = 1; 1702 cd->xl_tx_cons = 1; 1703 cd->xl_tx_cnt = 0; 1704 1705 bus_dmamap_sync(ld->xl_tx_tag, ld->xl_tx_dmamap, BUS_DMASYNC_PREWRITE); 1706 return (0); 1707 } 1708 1709 /* 1710 * Initialize the RX descriptors and allocate mbufs for them. Note that 1711 * we arrange the descriptors in a closed ring, so that the last descriptor 1712 * points back to the first. 1713 */ 1714 static int 1715 xl_list_rx_init(struct xl_softc *sc) 1716 { 1717 struct xl_chain_data *cd; 1718 struct xl_list_data *ld; 1719 int error, i, next; 1720 u_int32_t nextptr; 1721 1722 XL_LOCK_ASSERT(sc); 1723 1724 cd = &sc->xl_cdata; 1725 ld = &sc->xl_ldata; 1726 1727 for (i = 0; i < XL_RX_LIST_CNT; i++) { 1728 cd->xl_rx_chain[i].xl_ptr = &ld->xl_rx_list[i]; 1729 error = bus_dmamap_create(sc->xl_mtag, 0, 1730 &cd->xl_rx_chain[i].xl_map); 1731 if (error) 1732 return (error); 1733 error = xl_newbuf(sc, &cd->xl_rx_chain[i]); 1734 if (error) 1735 return (error); 1736 if (i == (XL_RX_LIST_CNT - 1)) 1737 next = 0; 1738 else 1739 next = i + 1; 1740 nextptr = ld->xl_rx_dmaaddr + 1741 next * sizeof(struct xl_list_onefrag); 1742 cd->xl_rx_chain[i].xl_next = &cd->xl_rx_chain[next]; 1743 ld->xl_rx_list[i].xl_next = htole32(nextptr); 1744 } 1745 1746 bus_dmamap_sync(ld->xl_rx_tag, ld->xl_rx_dmamap, BUS_DMASYNC_PREWRITE); 1747 cd->xl_rx_head = &cd->xl_rx_chain[0]; 1748 1749 return (0); 1750 } 1751 1752 /* 1753 * Initialize an RX descriptor and attach an MBUF cluster. 1754 * If we fail to do so, we need to leave the old mbuf and 1755 * the old DMA map untouched so that it can be reused. 1756 */ 1757 static int 1758 xl_newbuf(struct xl_softc *sc, struct xl_chain_onefrag *c) 1759 { 1760 struct mbuf *m_new = NULL; 1761 bus_dmamap_t map; 1762 bus_dma_segment_t segs[1]; 1763 int error, nseg; 1764 1765 XL_LOCK_ASSERT(sc); 1766 1767 m_new = m_getcl(M_NOWAIT, MT_DATA, M_PKTHDR); 1768 if (m_new == NULL) 1769 return (ENOBUFS); 1770 1771 m_new->m_len = m_new->m_pkthdr.len = MCLBYTES; 1772 1773 /* Force longword alignment for packet payload. */ 1774 m_adj(m_new, ETHER_ALIGN); 1775 1776 error = bus_dmamap_load_mbuf_sg(sc->xl_mtag, sc->xl_tmpmap, m_new, 1777 segs, &nseg, BUS_DMA_NOWAIT); 1778 if (error) { 1779 m_freem(m_new); 1780 device_printf(sc->xl_dev, "can't map mbuf (error %d)\n", 1781 error); 1782 return (error); 1783 } 1784 KASSERT(nseg == 1, 1785 ("%s: too many DMA segments (%d)", __func__, nseg)); 1786 1787 bus_dmamap_unload(sc->xl_mtag, c->xl_map); 1788 map = c->xl_map; 1789 c->xl_map = sc->xl_tmpmap; 1790 sc->xl_tmpmap = map; 1791 c->xl_mbuf = m_new; 1792 c->xl_ptr->xl_frag.xl_len = htole32(m_new->m_len | XL_LAST_FRAG); 1793 c->xl_ptr->xl_frag.xl_addr = htole32(segs->ds_addr); 1794 c->xl_ptr->xl_status = 0; 1795 bus_dmamap_sync(sc->xl_mtag, c->xl_map, BUS_DMASYNC_PREREAD); 1796 return (0); 1797 } 1798 1799 static int 1800 xl_rx_resync(struct xl_softc *sc) 1801 { 1802 struct xl_chain_onefrag *pos; 1803 int i; 1804 1805 XL_LOCK_ASSERT(sc); 1806 1807 pos = sc->xl_cdata.xl_rx_head; 1808 1809 for (i = 0; i < XL_RX_LIST_CNT; i++) { 1810 if (pos->xl_ptr->xl_status) 1811 break; 1812 pos = pos->xl_next; 1813 } 1814 1815 if (i == XL_RX_LIST_CNT) 1816 return (0); 1817 1818 sc->xl_cdata.xl_rx_head = pos; 1819 1820 return (EAGAIN); 1821 } 1822 1823 /* 1824 * A frame has been uploaded: pass the resulting mbuf chain up to 1825 * the higher level protocols. 1826 */ 1827 static int 1828 xl_rxeof(struct xl_softc *sc) 1829 { 1830 struct mbuf *m; 1831 struct ifnet *ifp = sc->xl_ifp; 1832 struct xl_chain_onefrag *cur_rx; 1833 int total_len; 1834 int rx_npkts = 0; 1835 u_int32_t rxstat; 1836 1837 XL_LOCK_ASSERT(sc); 1838 again: 1839 bus_dmamap_sync(sc->xl_ldata.xl_rx_tag, sc->xl_ldata.xl_rx_dmamap, 1840 BUS_DMASYNC_POSTREAD); 1841 while ((rxstat = le32toh(sc->xl_cdata.xl_rx_head->xl_ptr->xl_status))) { 1842 #ifdef DEVICE_POLLING 1843 if (ifp->if_capenable & IFCAP_POLLING) { 1844 if (sc->rxcycles <= 0) 1845 break; 1846 sc->rxcycles--; 1847 } 1848 #endif 1849 cur_rx = sc->xl_cdata.xl_rx_head; 1850 sc->xl_cdata.xl_rx_head = cur_rx->xl_next; 1851 total_len = rxstat & XL_RXSTAT_LENMASK; 1852 rx_npkts++; 1853 1854 /* 1855 * Since we have told the chip to allow large frames, 1856 * we need to trap giant frame errors in software. We allow 1857 * a little more than the normal frame size to account for 1858 * frames with VLAN tags. 1859 */ 1860 if (total_len > XL_MAX_FRAMELEN) 1861 rxstat |= (XL_RXSTAT_UP_ERROR|XL_RXSTAT_OVERSIZE); 1862 1863 /* 1864 * If an error occurs, update stats, clear the 1865 * status word and leave the mbuf cluster in place: 1866 * it should simply get re-used next time this descriptor 1867 * comes up in the ring. 1868 */ 1869 if (rxstat & XL_RXSTAT_UP_ERROR) { 1870 if_inc_counter(ifp, IFCOUNTER_IERRORS, 1); 1871 cur_rx->xl_ptr->xl_status = 0; 1872 bus_dmamap_sync(sc->xl_ldata.xl_rx_tag, 1873 sc->xl_ldata.xl_rx_dmamap, BUS_DMASYNC_PREWRITE); 1874 continue; 1875 } 1876 1877 /* 1878 * If the error bit was not set, the upload complete 1879 * bit should be set which means we have a valid packet. 1880 * If not, something truly strange has happened. 1881 */ 1882 if (!(rxstat & XL_RXSTAT_UP_CMPLT)) { 1883 device_printf(sc->xl_dev, 1884 "bad receive status -- packet dropped\n"); 1885 if_inc_counter(ifp, IFCOUNTER_IERRORS, 1); 1886 cur_rx->xl_ptr->xl_status = 0; 1887 bus_dmamap_sync(sc->xl_ldata.xl_rx_tag, 1888 sc->xl_ldata.xl_rx_dmamap, BUS_DMASYNC_PREWRITE); 1889 continue; 1890 } 1891 1892 /* No errors; receive the packet. */ 1893 bus_dmamap_sync(sc->xl_mtag, cur_rx->xl_map, 1894 BUS_DMASYNC_POSTREAD); 1895 m = cur_rx->xl_mbuf; 1896 1897 /* 1898 * Try to conjure up a new mbuf cluster. If that 1899 * fails, it means we have an out of memory condition and 1900 * should leave the buffer in place and continue. This will 1901 * result in a lost packet, but there's little else we 1902 * can do in this situation. 1903 */ 1904 if (xl_newbuf(sc, cur_rx)) { 1905 if_inc_counter(ifp, IFCOUNTER_IERRORS, 1); 1906 cur_rx->xl_ptr->xl_status = 0; 1907 bus_dmamap_sync(sc->xl_ldata.xl_rx_tag, 1908 sc->xl_ldata.xl_rx_dmamap, BUS_DMASYNC_PREWRITE); 1909 continue; 1910 } 1911 bus_dmamap_sync(sc->xl_ldata.xl_rx_tag, 1912 sc->xl_ldata.xl_rx_dmamap, BUS_DMASYNC_PREWRITE); 1913 1914 if_inc_counter(ifp, IFCOUNTER_IPACKETS, 1); 1915 m->m_pkthdr.rcvif = ifp; 1916 m->m_pkthdr.len = m->m_len = total_len; 1917 1918 if (ifp->if_capenable & IFCAP_RXCSUM) { 1919 /* Do IP checksum checking. */ 1920 if (rxstat & XL_RXSTAT_IPCKOK) 1921 m->m_pkthdr.csum_flags |= CSUM_IP_CHECKED; 1922 if (!(rxstat & XL_RXSTAT_IPCKERR)) 1923 m->m_pkthdr.csum_flags |= CSUM_IP_VALID; 1924 if ((rxstat & XL_RXSTAT_TCPCOK && 1925 !(rxstat & XL_RXSTAT_TCPCKERR)) || 1926 (rxstat & XL_RXSTAT_UDPCKOK && 1927 !(rxstat & XL_RXSTAT_UDPCKERR))) { 1928 m->m_pkthdr.csum_flags |= 1929 CSUM_DATA_VALID|CSUM_PSEUDO_HDR; 1930 m->m_pkthdr.csum_data = 0xffff; 1931 } 1932 } 1933 1934 XL_UNLOCK(sc); 1935 (*ifp->if_input)(ifp, m); 1936 XL_LOCK(sc); 1937 1938 /* 1939 * If we are running from the taskqueue, the interface 1940 * might have been stopped while we were passing the last 1941 * packet up the network stack. 1942 */ 1943 if (!(ifp->if_drv_flags & IFF_DRV_RUNNING)) 1944 return (rx_npkts); 1945 } 1946 1947 /* 1948 * Handle the 'end of channel' condition. When the upload 1949 * engine hits the end of the RX ring, it will stall. This 1950 * is our cue to flush the RX ring, reload the uplist pointer 1951 * register and unstall the engine. 1952 * XXX This is actually a little goofy. With the ThunderLAN 1953 * chip, you get an interrupt when the receiver hits the end 1954 * of the receive ring, which tells you exactly when you 1955 * you need to reload the ring pointer. Here we have to 1956 * fake it. I'm mad at myself for not being clever enough 1957 * to avoid the use of a goto here. 1958 */ 1959 if (CSR_READ_4(sc, XL_UPLIST_PTR) == 0 || 1960 CSR_READ_4(sc, XL_UPLIST_STATUS) & XL_PKTSTAT_UP_STALLED) { 1961 CSR_WRITE_2(sc, XL_COMMAND, XL_CMD_UP_STALL); 1962 xl_wait(sc); 1963 CSR_WRITE_4(sc, XL_UPLIST_PTR, sc->xl_ldata.xl_rx_dmaaddr); 1964 sc->xl_cdata.xl_rx_head = &sc->xl_cdata.xl_rx_chain[0]; 1965 CSR_WRITE_2(sc, XL_COMMAND, XL_CMD_UP_UNSTALL); 1966 goto again; 1967 } 1968 return (rx_npkts); 1969 } 1970 1971 /* 1972 * Taskqueue wrapper for xl_rxeof(). 1973 */ 1974 static void 1975 xl_rxeof_task(void *arg, int pending) 1976 { 1977 struct xl_softc *sc = (struct xl_softc *)arg; 1978 1979 XL_LOCK(sc); 1980 if (sc->xl_ifp->if_drv_flags & IFF_DRV_RUNNING) 1981 xl_rxeof(sc); 1982 XL_UNLOCK(sc); 1983 } 1984 1985 /* 1986 * A frame was downloaded to the chip. It's safe for us to clean up 1987 * the list buffers. 1988 */ 1989 static void 1990 xl_txeof(struct xl_softc *sc) 1991 { 1992 struct xl_chain *cur_tx; 1993 struct ifnet *ifp = sc->xl_ifp; 1994 1995 XL_LOCK_ASSERT(sc); 1996 1997 /* 1998 * Go through our tx list and free mbufs for those 1999 * frames that have been uploaded. Note: the 3c905B 2000 * sets a special bit in the status word to let us 2001 * know that a frame has been downloaded, but the 2002 * original 3c900/3c905 adapters don't do that. 2003 * Consequently, we have to use a different test if 2004 * xl_type != XL_TYPE_905B. 2005 */ 2006 while (sc->xl_cdata.xl_tx_head != NULL) { 2007 cur_tx = sc->xl_cdata.xl_tx_head; 2008 2009 if (CSR_READ_4(sc, XL_DOWNLIST_PTR)) 2010 break; 2011 2012 sc->xl_cdata.xl_tx_head = cur_tx->xl_next; 2013 bus_dmamap_sync(sc->xl_mtag, cur_tx->xl_map, 2014 BUS_DMASYNC_POSTWRITE); 2015 bus_dmamap_unload(sc->xl_mtag, cur_tx->xl_map); 2016 m_freem(cur_tx->xl_mbuf); 2017 cur_tx->xl_mbuf = NULL; 2018 if_inc_counter(ifp, IFCOUNTER_OPACKETS, 1); 2019 ifp->if_drv_flags &= ~IFF_DRV_OACTIVE; 2020 2021 cur_tx->xl_next = sc->xl_cdata.xl_tx_free; 2022 sc->xl_cdata.xl_tx_free = cur_tx; 2023 } 2024 2025 if (sc->xl_cdata.xl_tx_head == NULL) { 2026 sc->xl_wdog_timer = 0; 2027 sc->xl_cdata.xl_tx_tail = NULL; 2028 } else { 2029 if (CSR_READ_4(sc, XL_DMACTL) & XL_DMACTL_DOWN_STALLED || 2030 !CSR_READ_4(sc, XL_DOWNLIST_PTR)) { 2031 CSR_WRITE_4(sc, XL_DOWNLIST_PTR, 2032 sc->xl_cdata.xl_tx_head->xl_phys); 2033 CSR_WRITE_2(sc, XL_COMMAND, XL_CMD_DOWN_UNSTALL); 2034 } 2035 } 2036 } 2037 2038 static void 2039 xl_txeof_90xB(struct xl_softc *sc) 2040 { 2041 struct xl_chain *cur_tx = NULL; 2042 struct ifnet *ifp = sc->xl_ifp; 2043 int idx; 2044 2045 XL_LOCK_ASSERT(sc); 2046 2047 bus_dmamap_sync(sc->xl_ldata.xl_tx_tag, sc->xl_ldata.xl_tx_dmamap, 2048 BUS_DMASYNC_POSTREAD); 2049 idx = sc->xl_cdata.xl_tx_cons; 2050 while (idx != sc->xl_cdata.xl_tx_prod) { 2051 cur_tx = &sc->xl_cdata.xl_tx_chain[idx]; 2052 2053 if (!(le32toh(cur_tx->xl_ptr->xl_status) & 2054 XL_TXSTAT_DL_COMPLETE)) 2055 break; 2056 2057 if (cur_tx->xl_mbuf != NULL) { 2058 bus_dmamap_sync(sc->xl_mtag, cur_tx->xl_map, 2059 BUS_DMASYNC_POSTWRITE); 2060 bus_dmamap_unload(sc->xl_mtag, cur_tx->xl_map); 2061 m_freem(cur_tx->xl_mbuf); 2062 cur_tx->xl_mbuf = NULL; 2063 } 2064 2065 if_inc_counter(ifp, IFCOUNTER_OPACKETS, 1); 2066 2067 sc->xl_cdata.xl_tx_cnt--; 2068 XL_INC(idx, XL_TX_LIST_CNT); 2069 } 2070 2071 if (sc->xl_cdata.xl_tx_cnt == 0) 2072 sc->xl_wdog_timer = 0; 2073 sc->xl_cdata.xl_tx_cons = idx; 2074 2075 if (cur_tx != NULL) 2076 ifp->if_drv_flags &= ~IFF_DRV_OACTIVE; 2077 } 2078 2079 /* 2080 * TX 'end of channel' interrupt handler. Actually, we should 2081 * only get a 'TX complete' interrupt if there's a transmit error, 2082 * so this is really TX error handler. 2083 */ 2084 static void 2085 xl_txeoc(struct xl_softc *sc) 2086 { 2087 u_int8_t txstat; 2088 2089 XL_LOCK_ASSERT(sc); 2090 2091 while ((txstat = CSR_READ_1(sc, XL_TX_STATUS))) { 2092 if (txstat & XL_TXSTATUS_UNDERRUN || 2093 txstat & XL_TXSTATUS_JABBER || 2094 txstat & XL_TXSTATUS_RECLAIM) { 2095 device_printf(sc->xl_dev, 2096 "transmission error: 0x%02x\n", txstat); 2097 CSR_WRITE_2(sc, XL_COMMAND, XL_CMD_TX_RESET); 2098 xl_wait(sc); 2099 if (sc->xl_type == XL_TYPE_905B) { 2100 if (sc->xl_cdata.xl_tx_cnt) { 2101 int i; 2102 struct xl_chain *c; 2103 2104 i = sc->xl_cdata.xl_tx_cons; 2105 c = &sc->xl_cdata.xl_tx_chain[i]; 2106 CSR_WRITE_4(sc, XL_DOWNLIST_PTR, 2107 c->xl_phys); 2108 CSR_WRITE_1(sc, XL_DOWN_POLL, 64); 2109 sc->xl_wdog_timer = 5; 2110 } 2111 } else { 2112 if (sc->xl_cdata.xl_tx_head != NULL) { 2113 CSR_WRITE_4(sc, XL_DOWNLIST_PTR, 2114 sc->xl_cdata.xl_tx_head->xl_phys); 2115 sc->xl_wdog_timer = 5; 2116 } 2117 } 2118 /* 2119 * Remember to set this for the 2120 * first generation 3c90X chips. 2121 */ 2122 CSR_WRITE_1(sc, XL_TX_FREETHRESH, XL_PACKET_SIZE >> 8); 2123 if (txstat & XL_TXSTATUS_UNDERRUN && 2124 sc->xl_tx_thresh < XL_PACKET_SIZE) { 2125 sc->xl_tx_thresh += XL_MIN_FRAMELEN; 2126 device_printf(sc->xl_dev, 2127 "tx underrun, increasing tx start threshold to %d bytes\n", sc->xl_tx_thresh); 2128 } 2129 CSR_WRITE_2(sc, XL_COMMAND, 2130 XL_CMD_TX_SET_START|sc->xl_tx_thresh); 2131 if (sc->xl_type == XL_TYPE_905B) { 2132 CSR_WRITE_2(sc, XL_COMMAND, 2133 XL_CMD_SET_TX_RECLAIM|(XL_PACKET_SIZE >> 4)); 2134 } 2135 CSR_WRITE_2(sc, XL_COMMAND, XL_CMD_TX_ENABLE); 2136 CSR_WRITE_2(sc, XL_COMMAND, XL_CMD_DOWN_UNSTALL); 2137 } else { 2138 CSR_WRITE_2(sc, XL_COMMAND, XL_CMD_TX_ENABLE); 2139 CSR_WRITE_2(sc, XL_COMMAND, XL_CMD_DOWN_UNSTALL); 2140 } 2141 /* 2142 * Write an arbitrary byte to the TX_STATUS register 2143 * to clear this interrupt/error and advance to the next. 2144 */ 2145 CSR_WRITE_1(sc, XL_TX_STATUS, 0x01); 2146 } 2147 } 2148 2149 static void 2150 xl_intr(void *arg) 2151 { 2152 struct xl_softc *sc = arg; 2153 struct ifnet *ifp = sc->xl_ifp; 2154 u_int16_t status; 2155 2156 XL_LOCK(sc); 2157 2158 #ifdef DEVICE_POLLING 2159 if (ifp->if_capenable & IFCAP_POLLING) { 2160 XL_UNLOCK(sc); 2161 return; 2162 } 2163 #endif 2164 2165 for (;;) { 2166 status = CSR_READ_2(sc, XL_STATUS); 2167 if ((status & XL_INTRS) == 0 || status == 0xFFFF) 2168 break; 2169 CSR_WRITE_2(sc, XL_COMMAND, 2170 XL_CMD_INTR_ACK|(status & XL_INTRS)); 2171 if ((ifp->if_drv_flags & IFF_DRV_RUNNING) == 0) 2172 break; 2173 2174 if (status & XL_STAT_UP_COMPLETE) { 2175 if (xl_rxeof(sc) == 0) { 2176 while (xl_rx_resync(sc)) 2177 xl_rxeof(sc); 2178 } 2179 } 2180 2181 if (status & XL_STAT_DOWN_COMPLETE) { 2182 if (sc->xl_type == XL_TYPE_905B) 2183 xl_txeof_90xB(sc); 2184 else 2185 xl_txeof(sc); 2186 } 2187 2188 if (status & XL_STAT_TX_COMPLETE) { 2189 if_inc_counter(ifp, IFCOUNTER_OERRORS, 1); 2190 xl_txeoc(sc); 2191 } 2192 2193 if (status & XL_STAT_ADFAIL) { 2194 ifp->if_drv_flags &= ~IFF_DRV_RUNNING; 2195 xl_init_locked(sc); 2196 break; 2197 } 2198 2199 if (status & XL_STAT_STATSOFLOW) 2200 xl_stats_update(sc); 2201 } 2202 2203 if (!IFQ_DRV_IS_EMPTY(&ifp->if_snd) && 2204 ifp->if_drv_flags & IFF_DRV_RUNNING) { 2205 if (sc->xl_type == XL_TYPE_905B) 2206 xl_start_90xB_locked(ifp); 2207 else 2208 xl_start_locked(ifp); 2209 } 2210 2211 XL_UNLOCK(sc); 2212 } 2213 2214 #ifdef DEVICE_POLLING 2215 static int 2216 xl_poll(struct ifnet *ifp, enum poll_cmd cmd, int count) 2217 { 2218 struct xl_softc *sc = ifp->if_softc; 2219 int rx_npkts = 0; 2220 2221 XL_LOCK(sc); 2222 if (ifp->if_drv_flags & IFF_DRV_RUNNING) 2223 rx_npkts = xl_poll_locked(ifp, cmd, count); 2224 XL_UNLOCK(sc); 2225 return (rx_npkts); 2226 } 2227 2228 static int 2229 xl_poll_locked(struct ifnet *ifp, enum poll_cmd cmd, int count) 2230 { 2231 struct xl_softc *sc = ifp->if_softc; 2232 int rx_npkts; 2233 2234 XL_LOCK_ASSERT(sc); 2235 2236 sc->rxcycles = count; 2237 rx_npkts = xl_rxeof(sc); 2238 if (sc->xl_type == XL_TYPE_905B) 2239 xl_txeof_90xB(sc); 2240 else 2241 xl_txeof(sc); 2242 2243 if (!IFQ_DRV_IS_EMPTY(&ifp->if_snd)) { 2244 if (sc->xl_type == XL_TYPE_905B) 2245 xl_start_90xB_locked(ifp); 2246 else 2247 xl_start_locked(ifp); 2248 } 2249 2250 if (cmd == POLL_AND_CHECK_STATUS) { 2251 u_int16_t status; 2252 2253 status = CSR_READ_2(sc, XL_STATUS); 2254 if (status & XL_INTRS && status != 0xFFFF) { 2255 CSR_WRITE_2(sc, XL_COMMAND, 2256 XL_CMD_INTR_ACK|(status & XL_INTRS)); 2257 2258 if (status & XL_STAT_TX_COMPLETE) { 2259 if_inc_counter(ifp, IFCOUNTER_OERRORS, 1); 2260 xl_txeoc(sc); 2261 } 2262 2263 if (status & XL_STAT_ADFAIL) { 2264 ifp->if_drv_flags &= ~IFF_DRV_RUNNING; 2265 xl_init_locked(sc); 2266 } 2267 2268 if (status & XL_STAT_STATSOFLOW) 2269 xl_stats_update(sc); 2270 } 2271 } 2272 return (rx_npkts); 2273 } 2274 #endif /* DEVICE_POLLING */ 2275 2276 static void 2277 xl_tick(void *xsc) 2278 { 2279 struct xl_softc *sc = xsc; 2280 struct mii_data *mii; 2281 2282 XL_LOCK_ASSERT(sc); 2283 2284 if (sc->xl_miibus != NULL) { 2285 mii = device_get_softc(sc->xl_miibus); 2286 mii_tick(mii); 2287 } 2288 2289 xl_stats_update(sc); 2290 if (xl_watchdog(sc) == EJUSTRETURN) 2291 return; 2292 2293 callout_reset(&sc->xl_tick_callout, hz, xl_tick, sc); 2294 } 2295 2296 static void 2297 xl_stats_update(struct xl_softc *sc) 2298 { 2299 struct ifnet *ifp = sc->xl_ifp; 2300 struct xl_stats xl_stats; 2301 u_int8_t *p; 2302 int i; 2303 2304 XL_LOCK_ASSERT(sc); 2305 2306 bzero((char *)&xl_stats, sizeof(struct xl_stats)); 2307 2308 p = (u_int8_t *)&xl_stats; 2309 2310 /* Read all the stats registers. */ 2311 XL_SEL_WIN(6); 2312 2313 for (i = 0; i < 16; i++) 2314 *p++ = CSR_READ_1(sc, XL_W6_CARRIER_LOST + i); 2315 2316 if_inc_counter(ifp, IFCOUNTER_IERRORS, xl_stats.xl_rx_overrun); 2317 2318 if_inc_counter(ifp, IFCOUNTER_COLLISIONS, 2319 xl_stats.xl_tx_multi_collision + 2320 xl_stats.xl_tx_single_collision + 2321 xl_stats.xl_tx_late_collision); 2322 2323 /* 2324 * Boomerang and cyclone chips have an extra stats counter 2325 * in window 4 (BadSSD). We have to read this too in order 2326 * to clear out all the stats registers and avoid a statsoflow 2327 * interrupt. 2328 */ 2329 XL_SEL_WIN(4); 2330 CSR_READ_1(sc, XL_W4_BADSSD); 2331 XL_SEL_WIN(7); 2332 } 2333 2334 /* 2335 * Encapsulate an mbuf chain in a descriptor by coupling the mbuf data 2336 * pointers to the fragment pointers. 2337 */ 2338 static int 2339 xl_encap(struct xl_softc *sc, struct xl_chain *c, struct mbuf **m_head) 2340 { 2341 struct mbuf *m_new; 2342 struct ifnet *ifp = sc->xl_ifp; 2343 int error, i, nseg, total_len; 2344 u_int32_t status; 2345 2346 XL_LOCK_ASSERT(sc); 2347 2348 error = bus_dmamap_load_mbuf_sg(sc->xl_mtag, c->xl_map, *m_head, 2349 sc->xl_cdata.xl_tx_segs, &nseg, BUS_DMA_NOWAIT); 2350 2351 if (error && error != EFBIG) { 2352 if_printf(ifp, "can't map mbuf (error %d)\n", error); 2353 return (error); 2354 } 2355 2356 /* 2357 * Handle special case: we used up all 63 fragments, 2358 * but we have more mbufs left in the chain. Copy the 2359 * data into an mbuf cluster. Note that we don't 2360 * bother clearing the values in the other fragment 2361 * pointers/counters; it wouldn't gain us anything, 2362 * and would waste cycles. 2363 */ 2364 if (error) { 2365 m_new = m_collapse(*m_head, M_NOWAIT, XL_MAXFRAGS); 2366 if (m_new == NULL) { 2367 m_freem(*m_head); 2368 *m_head = NULL; 2369 return (ENOBUFS); 2370 } 2371 *m_head = m_new; 2372 2373 error = bus_dmamap_load_mbuf_sg(sc->xl_mtag, c->xl_map, 2374 *m_head, sc->xl_cdata.xl_tx_segs, &nseg, BUS_DMA_NOWAIT); 2375 if (error) { 2376 m_freem(*m_head); 2377 *m_head = NULL; 2378 if_printf(ifp, "can't map mbuf (error %d)\n", error); 2379 return (error); 2380 } 2381 } 2382 2383 KASSERT(nseg <= XL_MAXFRAGS, 2384 ("%s: too many DMA segments (%d)", __func__, nseg)); 2385 if (nseg == 0) { 2386 m_freem(*m_head); 2387 *m_head = NULL; 2388 return (EIO); 2389 } 2390 bus_dmamap_sync(sc->xl_mtag, c->xl_map, BUS_DMASYNC_PREWRITE); 2391 2392 total_len = 0; 2393 for (i = 0; i < nseg; i++) { 2394 KASSERT(sc->xl_cdata.xl_tx_segs[i].ds_len <= MCLBYTES, 2395 ("segment size too large")); 2396 c->xl_ptr->xl_frag[i].xl_addr = 2397 htole32(sc->xl_cdata.xl_tx_segs[i].ds_addr); 2398 c->xl_ptr->xl_frag[i].xl_len = 2399 htole32(sc->xl_cdata.xl_tx_segs[i].ds_len); 2400 total_len += sc->xl_cdata.xl_tx_segs[i].ds_len; 2401 } 2402 c->xl_ptr->xl_frag[nseg - 1].xl_len |= htole32(XL_LAST_FRAG); 2403 2404 if (sc->xl_type == XL_TYPE_905B) { 2405 status = XL_TXSTAT_RND_DEFEAT; 2406 2407 #ifndef XL905B_TXCSUM_BROKEN 2408 if ((*m_head)->m_pkthdr.csum_flags) { 2409 if ((*m_head)->m_pkthdr.csum_flags & CSUM_IP) 2410 status |= XL_TXSTAT_IPCKSUM; 2411 if ((*m_head)->m_pkthdr.csum_flags & CSUM_TCP) 2412 status |= XL_TXSTAT_TCPCKSUM; 2413 if ((*m_head)->m_pkthdr.csum_flags & CSUM_UDP) 2414 status |= XL_TXSTAT_UDPCKSUM; 2415 } 2416 #endif 2417 } else 2418 status = total_len; 2419 c->xl_ptr->xl_status = htole32(status); 2420 c->xl_ptr->xl_next = 0; 2421 2422 c->xl_mbuf = *m_head; 2423 return (0); 2424 } 2425 2426 /* 2427 * Main transmit routine. To avoid having to do mbuf copies, we put pointers 2428 * to the mbuf data regions directly in the transmit lists. We also save a 2429 * copy of the pointers since the transmit list fragment pointers are 2430 * physical addresses. 2431 */ 2432 2433 static void 2434 xl_start(struct ifnet *ifp) 2435 { 2436 struct xl_softc *sc = ifp->if_softc; 2437 2438 XL_LOCK(sc); 2439 2440 if (sc->xl_type == XL_TYPE_905B) 2441 xl_start_90xB_locked(ifp); 2442 else 2443 xl_start_locked(ifp); 2444 2445 XL_UNLOCK(sc); 2446 } 2447 2448 static void 2449 xl_start_locked(struct ifnet *ifp) 2450 { 2451 struct xl_softc *sc = ifp->if_softc; 2452 struct mbuf *m_head; 2453 struct xl_chain *prev = NULL, *cur_tx = NULL, *start_tx; 2454 struct xl_chain *prev_tx; 2455 int error; 2456 2457 XL_LOCK_ASSERT(sc); 2458 2459 if ((ifp->if_drv_flags & (IFF_DRV_RUNNING | IFF_DRV_OACTIVE)) != 2460 IFF_DRV_RUNNING) 2461 return; 2462 /* 2463 * Check for an available queue slot. If there are none, 2464 * punt. 2465 */ 2466 if (sc->xl_cdata.xl_tx_free == NULL) { 2467 xl_txeoc(sc); 2468 xl_txeof(sc); 2469 if (sc->xl_cdata.xl_tx_free == NULL) { 2470 ifp->if_drv_flags |= IFF_DRV_OACTIVE; 2471 return; 2472 } 2473 } 2474 2475 start_tx = sc->xl_cdata.xl_tx_free; 2476 2477 for (; !IFQ_DRV_IS_EMPTY(&ifp->if_snd) && 2478 sc->xl_cdata.xl_tx_free != NULL;) { 2479 IFQ_DRV_DEQUEUE(&ifp->if_snd, m_head); 2480 if (m_head == NULL) 2481 break; 2482 2483 /* Pick a descriptor off the free list. */ 2484 prev_tx = cur_tx; 2485 cur_tx = sc->xl_cdata.xl_tx_free; 2486 2487 /* Pack the data into the descriptor. */ 2488 error = xl_encap(sc, cur_tx, &m_head); 2489 if (error) { 2490 cur_tx = prev_tx; 2491 if (m_head == NULL) 2492 break; 2493 ifp->if_drv_flags |= IFF_DRV_OACTIVE; 2494 IFQ_DRV_PREPEND(&ifp->if_snd, m_head); 2495 break; 2496 } 2497 2498 sc->xl_cdata.xl_tx_free = cur_tx->xl_next; 2499 cur_tx->xl_next = NULL; 2500 2501 /* Chain it together. */ 2502 if (prev != NULL) { 2503 prev->xl_next = cur_tx; 2504 prev->xl_ptr->xl_next = htole32(cur_tx->xl_phys); 2505 } 2506 prev = cur_tx; 2507 2508 /* 2509 * If there's a BPF listener, bounce a copy of this frame 2510 * to him. 2511 */ 2512 BPF_MTAP(ifp, cur_tx->xl_mbuf); 2513 } 2514 2515 /* 2516 * If there are no packets queued, bail. 2517 */ 2518 if (cur_tx == NULL) 2519 return; 2520 2521 /* 2522 * Place the request for the upload interrupt 2523 * in the last descriptor in the chain. This way, if 2524 * we're chaining several packets at once, we'll only 2525 * get an interrupt once for the whole chain rather than 2526 * once for each packet. 2527 */ 2528 cur_tx->xl_ptr->xl_status |= htole32(XL_TXSTAT_DL_INTR); 2529 2530 /* 2531 * Queue the packets. If the TX channel is clear, update 2532 * the downlist pointer register. 2533 */ 2534 CSR_WRITE_2(sc, XL_COMMAND, XL_CMD_DOWN_STALL); 2535 xl_wait(sc); 2536 2537 if (sc->xl_cdata.xl_tx_head != NULL) { 2538 sc->xl_cdata.xl_tx_tail->xl_next = start_tx; 2539 sc->xl_cdata.xl_tx_tail->xl_ptr->xl_next = 2540 htole32(start_tx->xl_phys); 2541 sc->xl_cdata.xl_tx_tail->xl_ptr->xl_status &= 2542 htole32(~XL_TXSTAT_DL_INTR); 2543 sc->xl_cdata.xl_tx_tail = cur_tx; 2544 } else { 2545 sc->xl_cdata.xl_tx_head = start_tx; 2546 sc->xl_cdata.xl_tx_tail = cur_tx; 2547 } 2548 bus_dmamap_sync(sc->xl_ldata.xl_tx_tag, sc->xl_ldata.xl_tx_dmamap, 2549 BUS_DMASYNC_PREWRITE); 2550 if (!CSR_READ_4(sc, XL_DOWNLIST_PTR)) 2551 CSR_WRITE_4(sc, XL_DOWNLIST_PTR, start_tx->xl_phys); 2552 2553 CSR_WRITE_2(sc, XL_COMMAND, XL_CMD_DOWN_UNSTALL); 2554 2555 XL_SEL_WIN(7); 2556 2557 /* 2558 * Set a timeout in case the chip goes out to lunch. 2559 */ 2560 sc->xl_wdog_timer = 5; 2561 2562 /* 2563 * XXX Under certain conditions, usually on slower machines 2564 * where interrupts may be dropped, it's possible for the 2565 * adapter to chew up all the buffers in the receive ring 2566 * and stall, without us being able to do anything about it. 2567 * To guard against this, we need to make a pass over the 2568 * RX queue to make sure there aren't any packets pending. 2569 * Doing it here means we can flush the receive ring at the 2570 * same time the chip is DMAing the transmit descriptors we 2571 * just gave it. 2572 * 2573 * 3Com goes to some lengths to emphasize the Parallel Tasking (tm) 2574 * nature of their chips in all their marketing literature; 2575 * we may as well take advantage of it. :) 2576 */ 2577 taskqueue_enqueue(taskqueue_swi, &sc->xl_task); 2578 } 2579 2580 static void 2581 xl_start_90xB_locked(struct ifnet *ifp) 2582 { 2583 struct xl_softc *sc = ifp->if_softc; 2584 struct mbuf *m_head; 2585 struct xl_chain *prev = NULL, *cur_tx = NULL, *start_tx; 2586 struct xl_chain *prev_tx; 2587 int error, idx; 2588 2589 XL_LOCK_ASSERT(sc); 2590 2591 if ((ifp->if_drv_flags & (IFF_DRV_RUNNING | IFF_DRV_OACTIVE)) != 2592 IFF_DRV_RUNNING) 2593 return; 2594 2595 idx = sc->xl_cdata.xl_tx_prod; 2596 start_tx = &sc->xl_cdata.xl_tx_chain[idx]; 2597 2598 for (; !IFQ_DRV_IS_EMPTY(&ifp->if_snd) && 2599 sc->xl_cdata.xl_tx_chain[idx].xl_mbuf == NULL;) { 2600 if ((XL_TX_LIST_CNT - sc->xl_cdata.xl_tx_cnt) < 3) { 2601 ifp->if_drv_flags |= IFF_DRV_OACTIVE; 2602 break; 2603 } 2604 2605 IFQ_DRV_DEQUEUE(&ifp->if_snd, m_head); 2606 if (m_head == NULL) 2607 break; 2608 2609 prev_tx = cur_tx; 2610 cur_tx = &sc->xl_cdata.xl_tx_chain[idx]; 2611 2612 /* Pack the data into the descriptor. */ 2613 error = xl_encap(sc, cur_tx, &m_head); 2614 if (error) { 2615 cur_tx = prev_tx; 2616 if (m_head == NULL) 2617 break; 2618 ifp->if_drv_flags |= IFF_DRV_OACTIVE; 2619 IFQ_DRV_PREPEND(&ifp->if_snd, m_head); 2620 break; 2621 } 2622 2623 /* Chain it together. */ 2624 if (prev != NULL) 2625 prev->xl_ptr->xl_next = htole32(cur_tx->xl_phys); 2626 prev = cur_tx; 2627 2628 /* 2629 * If there's a BPF listener, bounce a copy of this frame 2630 * to him. 2631 */ 2632 BPF_MTAP(ifp, cur_tx->xl_mbuf); 2633 2634 XL_INC(idx, XL_TX_LIST_CNT); 2635 sc->xl_cdata.xl_tx_cnt++; 2636 } 2637 2638 /* 2639 * If there are no packets queued, bail. 2640 */ 2641 if (cur_tx == NULL) 2642 return; 2643 2644 /* 2645 * Place the request for the upload interrupt 2646 * in the last descriptor in the chain. This way, if 2647 * we're chaining several packets at once, we'll only 2648 * get an interrupt once for the whole chain rather than 2649 * once for each packet. 2650 */ 2651 cur_tx->xl_ptr->xl_status |= htole32(XL_TXSTAT_DL_INTR); 2652 2653 /* Start transmission */ 2654 sc->xl_cdata.xl_tx_prod = idx; 2655 start_tx->xl_prev->xl_ptr->xl_next = htole32(start_tx->xl_phys); 2656 bus_dmamap_sync(sc->xl_ldata.xl_tx_tag, sc->xl_ldata.xl_tx_dmamap, 2657 BUS_DMASYNC_PREWRITE); 2658 2659 /* 2660 * Set a timeout in case the chip goes out to lunch. 2661 */ 2662 sc->xl_wdog_timer = 5; 2663 } 2664 2665 static void 2666 xl_init(void *xsc) 2667 { 2668 struct xl_softc *sc = xsc; 2669 2670 XL_LOCK(sc); 2671 xl_init_locked(sc); 2672 XL_UNLOCK(sc); 2673 } 2674 2675 static void 2676 xl_init_locked(struct xl_softc *sc) 2677 { 2678 struct ifnet *ifp = sc->xl_ifp; 2679 int error, i; 2680 struct mii_data *mii = NULL; 2681 2682 XL_LOCK_ASSERT(sc); 2683 2684 if ((ifp->if_drv_flags & IFF_DRV_RUNNING) != 0) 2685 return; 2686 /* 2687 * Cancel pending I/O and free all RX/TX buffers. 2688 */ 2689 xl_stop(sc); 2690 2691 /* Reset the chip to a known state. */ 2692 xl_reset(sc); 2693 2694 if (sc->xl_miibus == NULL) { 2695 CSR_WRITE_2(sc, XL_COMMAND, XL_CMD_RX_RESET); 2696 xl_wait(sc); 2697 } 2698 CSR_WRITE_2(sc, XL_COMMAND, XL_CMD_TX_RESET); 2699 xl_wait(sc); 2700 DELAY(10000); 2701 2702 if (sc->xl_miibus != NULL) 2703 mii = device_get_softc(sc->xl_miibus); 2704 2705 /* 2706 * Clear WOL status and disable all WOL feature as WOL 2707 * would interfere Rx operation under normal environments. 2708 */ 2709 if ((sc->xl_flags & XL_FLAG_WOL) != 0) { 2710 XL_SEL_WIN(7); 2711 CSR_READ_2(sc, XL_W7_BM_PME); 2712 CSR_WRITE_2(sc, XL_W7_BM_PME, 0); 2713 } 2714 /* Init our MAC address */ 2715 XL_SEL_WIN(2); 2716 for (i = 0; i < ETHER_ADDR_LEN; i++) { 2717 CSR_WRITE_1(sc, XL_W2_STATION_ADDR_LO + i, 2718 IF_LLADDR(sc->xl_ifp)[i]); 2719 } 2720 2721 /* Clear the station mask. */ 2722 for (i = 0; i < 3; i++) 2723 CSR_WRITE_2(sc, XL_W2_STATION_MASK_LO + (i * 2), 0); 2724 #ifdef notdef 2725 /* Reset TX and RX. */ 2726 CSR_WRITE_2(sc, XL_COMMAND, XL_CMD_RX_RESET); 2727 xl_wait(sc); 2728 CSR_WRITE_2(sc, XL_COMMAND, XL_CMD_TX_RESET); 2729 xl_wait(sc); 2730 #endif 2731 /* Init circular RX list. */ 2732 error = xl_list_rx_init(sc); 2733 if (error) { 2734 device_printf(sc->xl_dev, "initialization of the rx ring failed (%d)\n", 2735 error); 2736 xl_stop(sc); 2737 return; 2738 } 2739 2740 /* Init TX descriptors. */ 2741 if (sc->xl_type == XL_TYPE_905B) 2742 error = xl_list_tx_init_90xB(sc); 2743 else 2744 error = xl_list_tx_init(sc); 2745 if (error) { 2746 device_printf(sc->xl_dev, "initialization of the tx ring failed (%d)\n", 2747 error); 2748 xl_stop(sc); 2749 return; 2750 } 2751 2752 /* 2753 * Set the TX freethresh value. 2754 * Note that this has no effect on 3c905B "cyclone" 2755 * cards but is required for 3c900/3c905 "boomerang" 2756 * cards in order to enable the download engine. 2757 */ 2758 CSR_WRITE_1(sc, XL_TX_FREETHRESH, XL_PACKET_SIZE >> 8); 2759 2760 /* Set the TX start threshold for best performance. */ 2761 CSR_WRITE_2(sc, XL_COMMAND, XL_CMD_TX_SET_START|sc->xl_tx_thresh); 2762 2763 /* 2764 * If this is a 3c905B, also set the tx reclaim threshold. 2765 * This helps cut down on the number of tx reclaim errors 2766 * that could happen on a busy network. The chip multiplies 2767 * the register value by 16 to obtain the actual threshold 2768 * in bytes, so we divide by 16 when setting the value here. 2769 * The existing threshold value can be examined by reading 2770 * the register at offset 9 in window 5. 2771 */ 2772 if (sc->xl_type == XL_TYPE_905B) { 2773 CSR_WRITE_2(sc, XL_COMMAND, 2774 XL_CMD_SET_TX_RECLAIM|(XL_PACKET_SIZE >> 4)); 2775 } 2776 2777 /* Set RX filter bits. */ 2778 xl_rxfilter(sc); 2779 2780 /* 2781 * Load the address of the RX list. We have to 2782 * stall the upload engine before we can manipulate 2783 * the uplist pointer register, then unstall it when 2784 * we're finished. We also have to wait for the 2785 * stall command to complete before proceeding. 2786 * Note that we have to do this after any RX resets 2787 * have completed since the uplist register is cleared 2788 * by a reset. 2789 */ 2790 CSR_WRITE_2(sc, XL_COMMAND, XL_CMD_UP_STALL); 2791 xl_wait(sc); 2792 CSR_WRITE_4(sc, XL_UPLIST_PTR, sc->xl_ldata.xl_rx_dmaaddr); 2793 CSR_WRITE_2(sc, XL_COMMAND, XL_CMD_UP_UNSTALL); 2794 xl_wait(sc); 2795 2796 if (sc->xl_type == XL_TYPE_905B) { 2797 /* Set polling interval */ 2798 CSR_WRITE_1(sc, XL_DOWN_POLL, 64); 2799 /* Load the address of the TX list */ 2800 CSR_WRITE_2(sc, XL_COMMAND, XL_CMD_DOWN_STALL); 2801 xl_wait(sc); 2802 CSR_WRITE_4(sc, XL_DOWNLIST_PTR, 2803 sc->xl_cdata.xl_tx_chain[0].xl_phys); 2804 CSR_WRITE_2(sc, XL_COMMAND, XL_CMD_DOWN_UNSTALL); 2805 xl_wait(sc); 2806 } 2807 2808 /* 2809 * If the coax transceiver is on, make sure to enable 2810 * the DC-DC converter. 2811 */ 2812 XL_SEL_WIN(3); 2813 if (sc->xl_xcvr == XL_XCVR_COAX) 2814 CSR_WRITE_2(sc, XL_COMMAND, XL_CMD_COAX_START); 2815 else 2816 CSR_WRITE_2(sc, XL_COMMAND, XL_CMD_COAX_STOP); 2817 2818 /* 2819 * increase packet size to allow reception of 802.1q or ISL packets. 2820 * For the 3c90x chip, set the 'allow large packets' bit in the MAC 2821 * control register. For 3c90xB/C chips, use the RX packet size 2822 * register. 2823 */ 2824 2825 if (sc->xl_type == XL_TYPE_905B) 2826 CSR_WRITE_2(sc, XL_W3_MAXPKTSIZE, XL_PACKET_SIZE); 2827 else { 2828 u_int8_t macctl; 2829 macctl = CSR_READ_1(sc, XL_W3_MAC_CTRL); 2830 macctl |= XL_MACCTRL_ALLOW_LARGE_PACK; 2831 CSR_WRITE_1(sc, XL_W3_MAC_CTRL, macctl); 2832 } 2833 2834 /* Clear out the stats counters. */ 2835 CSR_WRITE_2(sc, XL_COMMAND, XL_CMD_STATS_DISABLE); 2836 xl_stats_update(sc); 2837 XL_SEL_WIN(4); 2838 CSR_WRITE_2(sc, XL_W4_NET_DIAG, XL_NETDIAG_UPPER_BYTES_ENABLE); 2839 CSR_WRITE_2(sc, XL_COMMAND, XL_CMD_STATS_ENABLE); 2840 2841 /* 2842 * Enable interrupts. 2843 */ 2844 CSR_WRITE_2(sc, XL_COMMAND, XL_CMD_INTR_ACK|0xFF); 2845 CSR_WRITE_2(sc, XL_COMMAND, XL_CMD_STAT_ENB|XL_INTRS); 2846 #ifdef DEVICE_POLLING 2847 /* Disable interrupts if we are polling. */ 2848 if (ifp->if_capenable & IFCAP_POLLING) 2849 CSR_WRITE_2(sc, XL_COMMAND, XL_CMD_INTR_ENB|0); 2850 else 2851 #endif 2852 CSR_WRITE_2(sc, XL_COMMAND, XL_CMD_INTR_ENB|XL_INTRS); 2853 if (sc->xl_flags & XL_FLAG_FUNCREG) 2854 bus_space_write_4(sc->xl_ftag, sc->xl_fhandle, 4, 0x8000); 2855 2856 /* Set the RX early threshold */ 2857 CSR_WRITE_2(sc, XL_COMMAND, XL_CMD_RX_SET_THRESH|(XL_PACKET_SIZE >>2)); 2858 CSR_WRITE_4(sc, XL_DMACTL, XL_DMACTL_UP_RX_EARLY); 2859 2860 /* Enable receiver and transmitter. */ 2861 CSR_WRITE_2(sc, XL_COMMAND, XL_CMD_TX_ENABLE); 2862 xl_wait(sc); 2863 CSR_WRITE_2(sc, XL_COMMAND, XL_CMD_RX_ENABLE); 2864 xl_wait(sc); 2865 2866 /* XXX Downcall to miibus. */ 2867 if (mii != NULL) 2868 mii_mediachg(mii); 2869 2870 /* Select window 7 for normal operations. */ 2871 XL_SEL_WIN(7); 2872 2873 ifp->if_drv_flags |= IFF_DRV_RUNNING; 2874 ifp->if_drv_flags &= ~IFF_DRV_OACTIVE; 2875 2876 sc->xl_wdog_timer = 0; 2877 callout_reset(&sc->xl_tick_callout, hz, xl_tick, sc); 2878 } 2879 2880 /* 2881 * Set media options. 2882 */ 2883 static int 2884 xl_ifmedia_upd(struct ifnet *ifp) 2885 { 2886 struct xl_softc *sc = ifp->if_softc; 2887 struct ifmedia *ifm = NULL; 2888 struct mii_data *mii = NULL; 2889 2890 XL_LOCK(sc); 2891 2892 if (sc->xl_miibus != NULL) 2893 mii = device_get_softc(sc->xl_miibus); 2894 if (mii == NULL) 2895 ifm = &sc->ifmedia; 2896 else 2897 ifm = &mii->mii_media; 2898 2899 switch (IFM_SUBTYPE(ifm->ifm_media)) { 2900 case IFM_100_FX: 2901 case IFM_10_FL: 2902 case IFM_10_2: 2903 case IFM_10_5: 2904 xl_setmode(sc, ifm->ifm_media); 2905 XL_UNLOCK(sc); 2906 return (0); 2907 } 2908 2909 if (sc->xl_media & XL_MEDIAOPT_MII || 2910 sc->xl_media & XL_MEDIAOPT_BTX || 2911 sc->xl_media & XL_MEDIAOPT_BT4) { 2912 ifp->if_drv_flags &= ~IFF_DRV_RUNNING; 2913 xl_init_locked(sc); 2914 } else { 2915 xl_setmode(sc, ifm->ifm_media); 2916 } 2917 2918 XL_UNLOCK(sc); 2919 2920 return (0); 2921 } 2922 2923 /* 2924 * Report current media status. 2925 */ 2926 static void 2927 xl_ifmedia_sts(struct ifnet *ifp, struct ifmediareq *ifmr) 2928 { 2929 struct xl_softc *sc = ifp->if_softc; 2930 u_int32_t icfg; 2931 u_int16_t status = 0; 2932 struct mii_data *mii = NULL; 2933 2934 XL_LOCK(sc); 2935 2936 if (sc->xl_miibus != NULL) 2937 mii = device_get_softc(sc->xl_miibus); 2938 2939 XL_SEL_WIN(4); 2940 status = CSR_READ_2(sc, XL_W4_MEDIA_STATUS); 2941 2942 XL_SEL_WIN(3); 2943 icfg = CSR_READ_4(sc, XL_W3_INTERNAL_CFG) & XL_ICFG_CONNECTOR_MASK; 2944 icfg >>= XL_ICFG_CONNECTOR_BITS; 2945 2946 ifmr->ifm_active = IFM_ETHER; 2947 ifmr->ifm_status = IFM_AVALID; 2948 2949 if ((status & XL_MEDIASTAT_CARRIER) == 0) 2950 ifmr->ifm_status |= IFM_ACTIVE; 2951 2952 switch (icfg) { 2953 case XL_XCVR_10BT: 2954 ifmr->ifm_active = IFM_ETHER|IFM_10_T; 2955 if (CSR_READ_1(sc, XL_W3_MAC_CTRL) & XL_MACCTRL_DUPLEX) 2956 ifmr->ifm_active |= IFM_FDX; 2957 else 2958 ifmr->ifm_active |= IFM_HDX; 2959 break; 2960 case XL_XCVR_AUI: 2961 if (sc->xl_type == XL_TYPE_905B && 2962 sc->xl_media == XL_MEDIAOPT_10FL) { 2963 ifmr->ifm_active = IFM_ETHER|IFM_10_FL; 2964 if (CSR_READ_1(sc, XL_W3_MAC_CTRL) & XL_MACCTRL_DUPLEX) 2965 ifmr->ifm_active |= IFM_FDX; 2966 else 2967 ifmr->ifm_active |= IFM_HDX; 2968 } else 2969 ifmr->ifm_active = IFM_ETHER|IFM_10_5; 2970 break; 2971 case XL_XCVR_COAX: 2972 ifmr->ifm_active = IFM_ETHER|IFM_10_2; 2973 break; 2974 /* 2975 * XXX MII and BTX/AUTO should be separate cases. 2976 */ 2977 2978 case XL_XCVR_100BTX: 2979 case XL_XCVR_AUTO: 2980 case XL_XCVR_MII: 2981 if (mii != NULL) { 2982 mii_pollstat(mii); 2983 ifmr->ifm_active = mii->mii_media_active; 2984 ifmr->ifm_status = mii->mii_media_status; 2985 } 2986 break; 2987 case XL_XCVR_100BFX: 2988 ifmr->ifm_active = IFM_ETHER|IFM_100_FX; 2989 break; 2990 default: 2991 if_printf(ifp, "unknown XCVR type: %d\n", icfg); 2992 break; 2993 } 2994 2995 XL_UNLOCK(sc); 2996 } 2997 2998 static int 2999 xl_ioctl(struct ifnet *ifp, u_long command, caddr_t data) 3000 { 3001 struct xl_softc *sc = ifp->if_softc; 3002 struct ifreq *ifr = (struct ifreq *) data; 3003 int error = 0, mask; 3004 struct mii_data *mii = NULL; 3005 3006 switch (command) { 3007 case SIOCSIFFLAGS: 3008 XL_LOCK(sc); 3009 if (ifp->if_flags & IFF_UP) { 3010 if (ifp->if_drv_flags & IFF_DRV_RUNNING && 3011 (ifp->if_flags ^ sc->xl_if_flags) & 3012 (IFF_PROMISC | IFF_ALLMULTI)) 3013 xl_rxfilter(sc); 3014 else 3015 xl_init_locked(sc); 3016 } else { 3017 if (ifp->if_drv_flags & IFF_DRV_RUNNING) 3018 xl_stop(sc); 3019 } 3020 sc->xl_if_flags = ifp->if_flags; 3021 XL_UNLOCK(sc); 3022 break; 3023 case SIOCADDMULTI: 3024 case SIOCDELMULTI: 3025 /* XXX Downcall from if_addmulti() possibly with locks held. */ 3026 XL_LOCK(sc); 3027 if (ifp->if_drv_flags & IFF_DRV_RUNNING) 3028 xl_rxfilter(sc); 3029 XL_UNLOCK(sc); 3030 break; 3031 case SIOCGIFMEDIA: 3032 case SIOCSIFMEDIA: 3033 if (sc->xl_miibus != NULL) 3034 mii = device_get_softc(sc->xl_miibus); 3035 if (mii == NULL) 3036 error = ifmedia_ioctl(ifp, ifr, 3037 &sc->ifmedia, command); 3038 else 3039 error = ifmedia_ioctl(ifp, ifr, 3040 &mii->mii_media, command); 3041 break; 3042 case SIOCSIFCAP: 3043 mask = ifr->ifr_reqcap ^ ifp->if_capenable; 3044 #ifdef DEVICE_POLLING 3045 if ((mask & IFCAP_POLLING) != 0 && 3046 (ifp->if_capabilities & IFCAP_POLLING) != 0) { 3047 ifp->if_capenable ^= IFCAP_POLLING; 3048 if ((ifp->if_capenable & IFCAP_POLLING) != 0) { 3049 error = ether_poll_register(xl_poll, ifp); 3050 if (error) 3051 break; 3052 XL_LOCK(sc); 3053 /* Disable interrupts */ 3054 CSR_WRITE_2(sc, XL_COMMAND, XL_CMD_INTR_ENB|0); 3055 ifp->if_capenable |= IFCAP_POLLING; 3056 XL_UNLOCK(sc); 3057 } else { 3058 error = ether_poll_deregister(ifp); 3059 /* Enable interrupts. */ 3060 XL_LOCK(sc); 3061 CSR_WRITE_2(sc, XL_COMMAND, 3062 XL_CMD_INTR_ACK | 0xFF); 3063 CSR_WRITE_2(sc, XL_COMMAND, 3064 XL_CMD_INTR_ENB | XL_INTRS); 3065 if (sc->xl_flags & XL_FLAG_FUNCREG) 3066 bus_space_write_4(sc->xl_ftag, 3067 sc->xl_fhandle, 4, 0x8000); 3068 XL_UNLOCK(sc); 3069 } 3070 } 3071 #endif /* DEVICE_POLLING */ 3072 XL_LOCK(sc); 3073 if ((mask & IFCAP_TXCSUM) != 0 && 3074 (ifp->if_capabilities & IFCAP_TXCSUM) != 0) { 3075 ifp->if_capenable ^= IFCAP_TXCSUM; 3076 if ((ifp->if_capenable & IFCAP_TXCSUM) != 0) 3077 ifp->if_hwassist |= XL905B_CSUM_FEATURES; 3078 else 3079 ifp->if_hwassist &= ~XL905B_CSUM_FEATURES; 3080 } 3081 if ((mask & IFCAP_RXCSUM) != 0 && 3082 (ifp->if_capabilities & IFCAP_RXCSUM) != 0) 3083 ifp->if_capenable ^= IFCAP_RXCSUM; 3084 if ((mask & IFCAP_WOL_MAGIC) != 0 && 3085 (ifp->if_capabilities & IFCAP_WOL_MAGIC) != 0) 3086 ifp->if_capenable ^= IFCAP_WOL_MAGIC; 3087 XL_UNLOCK(sc); 3088 break; 3089 default: 3090 error = ether_ioctl(ifp, command, data); 3091 break; 3092 } 3093 3094 return (error); 3095 } 3096 3097 static int 3098 xl_watchdog(struct xl_softc *sc) 3099 { 3100 struct ifnet *ifp = sc->xl_ifp; 3101 u_int16_t status = 0; 3102 int misintr; 3103 3104 XL_LOCK_ASSERT(sc); 3105 3106 if (sc->xl_wdog_timer == 0 || --sc->xl_wdog_timer != 0) 3107 return (0); 3108 3109 xl_rxeof(sc); 3110 xl_txeoc(sc); 3111 misintr = 0; 3112 if (sc->xl_type == XL_TYPE_905B) { 3113 xl_txeof_90xB(sc); 3114 if (sc->xl_cdata.xl_tx_cnt == 0) 3115 misintr++; 3116 } else { 3117 xl_txeof(sc); 3118 if (sc->xl_cdata.xl_tx_head == NULL) 3119 misintr++; 3120 } 3121 if (misintr != 0) { 3122 device_printf(sc->xl_dev, 3123 "watchdog timeout (missed Tx interrupts) -- recovering\n"); 3124 return (0); 3125 } 3126 3127 if_inc_counter(ifp, IFCOUNTER_OERRORS, 1); 3128 XL_SEL_WIN(4); 3129 status = CSR_READ_2(sc, XL_W4_MEDIA_STATUS); 3130 device_printf(sc->xl_dev, "watchdog timeout\n"); 3131 3132 if (status & XL_MEDIASTAT_CARRIER) 3133 device_printf(sc->xl_dev, 3134 "no carrier - transceiver cable problem?\n"); 3135 3136 ifp->if_drv_flags &= ~IFF_DRV_RUNNING; 3137 xl_init_locked(sc); 3138 3139 if (!IFQ_DRV_IS_EMPTY(&ifp->if_snd)) { 3140 if (sc->xl_type == XL_TYPE_905B) 3141 xl_start_90xB_locked(ifp); 3142 else 3143 xl_start_locked(ifp); 3144 } 3145 3146 return (EJUSTRETURN); 3147 } 3148 3149 /* 3150 * Stop the adapter and free any mbufs allocated to the 3151 * RX and TX lists. 3152 */ 3153 static void 3154 xl_stop(struct xl_softc *sc) 3155 { 3156 int i; 3157 struct ifnet *ifp = sc->xl_ifp; 3158 3159 XL_LOCK_ASSERT(sc); 3160 3161 sc->xl_wdog_timer = 0; 3162 3163 CSR_WRITE_2(sc, XL_COMMAND, XL_CMD_RX_DISABLE); 3164 CSR_WRITE_2(sc, XL_COMMAND, XL_CMD_STATS_DISABLE); 3165 CSR_WRITE_2(sc, XL_COMMAND, XL_CMD_INTR_ENB); 3166 CSR_WRITE_2(sc, XL_COMMAND, XL_CMD_RX_DISCARD); 3167 xl_wait(sc); 3168 CSR_WRITE_2(sc, XL_COMMAND, XL_CMD_TX_DISABLE); 3169 CSR_WRITE_2(sc, XL_COMMAND, XL_CMD_COAX_STOP); 3170 DELAY(800); 3171 3172 #ifdef foo 3173 CSR_WRITE_2(sc, XL_COMMAND, XL_CMD_RX_RESET); 3174 xl_wait(sc); 3175 CSR_WRITE_2(sc, XL_COMMAND, XL_CMD_TX_RESET); 3176 xl_wait(sc); 3177 #endif 3178 3179 CSR_WRITE_2(sc, XL_COMMAND, XL_CMD_INTR_ACK|XL_STAT_INTLATCH); 3180 CSR_WRITE_2(sc, XL_COMMAND, XL_CMD_STAT_ENB|0); 3181 CSR_WRITE_2(sc, XL_COMMAND, XL_CMD_INTR_ENB|0); 3182 if (sc->xl_flags & XL_FLAG_FUNCREG) 3183 bus_space_write_4(sc->xl_ftag, sc->xl_fhandle, 4, 0x8000); 3184 3185 /* Stop the stats updater. */ 3186 callout_stop(&sc->xl_tick_callout); 3187 3188 /* 3189 * Free data in the RX lists. 3190 */ 3191 for (i = 0; i < XL_RX_LIST_CNT; i++) { 3192 if (sc->xl_cdata.xl_rx_chain[i].xl_mbuf != NULL) { 3193 bus_dmamap_unload(sc->xl_mtag, 3194 sc->xl_cdata.xl_rx_chain[i].xl_map); 3195 bus_dmamap_destroy(sc->xl_mtag, 3196 sc->xl_cdata.xl_rx_chain[i].xl_map); 3197 m_freem(sc->xl_cdata.xl_rx_chain[i].xl_mbuf); 3198 sc->xl_cdata.xl_rx_chain[i].xl_mbuf = NULL; 3199 } 3200 } 3201 if (sc->xl_ldata.xl_rx_list != NULL) 3202 bzero(sc->xl_ldata.xl_rx_list, XL_RX_LIST_SZ); 3203 /* 3204 * Free the TX list buffers. 3205 */ 3206 for (i = 0; i < XL_TX_LIST_CNT; i++) { 3207 if (sc->xl_cdata.xl_tx_chain[i].xl_mbuf != NULL) { 3208 bus_dmamap_unload(sc->xl_mtag, 3209 sc->xl_cdata.xl_tx_chain[i].xl_map); 3210 bus_dmamap_destroy(sc->xl_mtag, 3211 sc->xl_cdata.xl_tx_chain[i].xl_map); 3212 m_freem(sc->xl_cdata.xl_tx_chain[i].xl_mbuf); 3213 sc->xl_cdata.xl_tx_chain[i].xl_mbuf = NULL; 3214 } 3215 } 3216 if (sc->xl_ldata.xl_tx_list != NULL) 3217 bzero(sc->xl_ldata.xl_tx_list, XL_TX_LIST_SZ); 3218 3219 ifp->if_drv_flags &= ~(IFF_DRV_RUNNING | IFF_DRV_OACTIVE); 3220 } 3221 3222 /* 3223 * Stop all chip I/O so that the kernel's probe routines don't 3224 * get confused by errant DMAs when rebooting. 3225 */ 3226 static int 3227 xl_shutdown(device_t dev) 3228 { 3229 3230 return (xl_suspend(dev)); 3231 } 3232 3233 static int 3234 xl_suspend(device_t dev) 3235 { 3236 struct xl_softc *sc; 3237 3238 sc = device_get_softc(dev); 3239 3240 XL_LOCK(sc); 3241 xl_stop(sc); 3242 xl_setwol(sc); 3243 XL_UNLOCK(sc); 3244 3245 return (0); 3246 } 3247 3248 static int 3249 xl_resume(device_t dev) 3250 { 3251 struct xl_softc *sc; 3252 struct ifnet *ifp; 3253 3254 sc = device_get_softc(dev); 3255 ifp = sc->xl_ifp; 3256 3257 XL_LOCK(sc); 3258 3259 if (ifp->if_flags & IFF_UP) { 3260 ifp->if_drv_flags &= ~IFF_DRV_RUNNING; 3261 xl_init_locked(sc); 3262 } 3263 3264 XL_UNLOCK(sc); 3265 3266 return (0); 3267 } 3268 3269 static void 3270 xl_setwol(struct xl_softc *sc) 3271 { 3272 struct ifnet *ifp; 3273 u_int16_t cfg, pmstat; 3274 3275 if ((sc->xl_flags & XL_FLAG_WOL) == 0) 3276 return; 3277 3278 ifp = sc->xl_ifp; 3279 XL_SEL_WIN(7); 3280 /* Clear any pending PME events. */ 3281 CSR_READ_2(sc, XL_W7_BM_PME); 3282 cfg = 0; 3283 if ((ifp->if_capenable & IFCAP_WOL_MAGIC) != 0) 3284 cfg |= XL_BM_PME_MAGIC; 3285 CSR_WRITE_2(sc, XL_W7_BM_PME, cfg); 3286 /* Enable RX. */ 3287 if ((ifp->if_capenable & IFCAP_WOL_MAGIC) != 0) 3288 CSR_WRITE_2(sc, XL_COMMAND, XL_CMD_RX_ENABLE); 3289 /* Request PME. */ 3290 pmstat = pci_read_config(sc->xl_dev, 3291 sc->xl_pmcap + PCIR_POWER_STATUS, 2); 3292 if ((ifp->if_capenable & IFCAP_WOL_MAGIC) != 0) 3293 pmstat |= PCIM_PSTAT_PMEENABLE; 3294 else 3295 pmstat &= ~PCIM_PSTAT_PMEENABLE; 3296 pci_write_config(sc->xl_dev, 3297 sc->xl_pmcap + PCIR_POWER_STATUS, pmstat, 2); 3298 } 3299