1 /*- 2 * SPDX-License-Identifier: BSD-2-Clause-FreeBSD 3 * 4 * Copyright (c) 2011 Sandvine Incorporated ULC. 5 * Copyright (c) 2012 iXsystems, Inc. 6 * All rights reserved. 7 * 8 * Redistribution and use in source and binary forms, with or without 9 * modification, are permitted provided that the following conditions 10 * are met: 11 * 1. Redistributions of source code must retain the above copyright 12 * notice, this list of conditions and the following disclaimer. 13 * 2. Redistributions in binary form must reproduce the above copyright 14 * notice, this list of conditions and the following disclaimer in the 15 * documentation and/or other materials provided with the distribution. 16 * 17 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND 18 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE 19 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE 20 * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE 21 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL 22 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS 23 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) 24 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT 25 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY 26 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF 27 * SUCH DAMAGE. 28 */ 29 /* 30 * Support for Winbond watchdog. 31 * 32 * With minor abstractions it might be possible to add support for other 33 * different Winbond Super I/O chips as well. Winbond seems to have four 34 * different types of chips, four different ways to get into extended config 35 * mode. 36 * 37 * Note: there is no serialization between the debugging sysctl handlers and 38 * the watchdog functions and possibly others poking the registers at the same 39 * time. For that at least possibly interfering sysctls are hidden by default. 40 */ 41 42 #include <sys/cdefs.h> 43 __FBSDID("$FreeBSD$"); 44 45 #include <sys/param.h> 46 #include <sys/kernel.h> 47 #include <sys/systm.h> 48 #include <sys/bus.h> 49 #include <sys/eventhandler.h> 50 #include <sys/module.h> 51 #include <sys/sbuf.h> 52 #include <sys/sysctl.h> 53 #include <sys/watchdog.h> 54 55 #include <dev/superio/superio.h> 56 57 #include <machine/bus.h> 58 #include <machine/resource.h> 59 60 /* 61 * Global registers. 62 */ 63 #define WB_DEVICE_ID_REG 0x20 /* Device ID */ 64 #define WB_DEVICE_REV_REG 0x21 /* Device revision */ 65 #define WB_CR26 0x26 /* Bit6: HEFRAS (base port selector) */ 66 67 /* LDN selection. */ 68 #define WB_LDN_REG 0x07 69 #define WB_LDN_REG_LDN8 0x08 /* GPIO 2, Watchdog */ 70 71 /* 72 * LDN8 (GPIO 2, Watchdog) specific registers and options. 73 */ 74 /* CR30: LDN8 activation control. */ 75 #define WB_LDN8_CR30 0x30 76 #define WB_LDN8_CR30_ACTIVE 0x01 /* 1: LD active */ 77 78 /* CRF5: Watchdog scale, P20. Mapped to reg_1. */ 79 #define WB_LDN8_CRF5 0xF5 80 #define WB_LDN8_CRF5_SCALE 0x08 /* 0: 1s, 1: 60s */ 81 #define WB_LDN8_CRF5_KEYB_P20 0x04 /* 1: keyb P20 forces timeout */ 82 #define WB_LDN8_CRF5_KBRST 0x02 /* 1: timeout causes pin60 kbd reset */ 83 84 /* CRF6: Watchdog Timeout (0 == off). Mapped to reg_timeout. */ 85 #define WB_LDN8_CRF6 0xF6 86 87 /* CRF7: Watchdog mouse, keyb, force, .. Mapped to reg_2. */ 88 #define WB_LDN8_CRF7 0xF7 89 #define WB_LDN8_CRF7_MOUSE 0x80 /* 1: mouse irq resets wd timer */ 90 #define WB_LDN8_CRF7_KEYB 0x40 /* 1: keyb irq resets wd timer */ 91 #define WB_LDN8_CRF7_FORCE 0x20 /* 1: force timeout (self-clear) */ 92 #define WB_LDN8_CRF7_TS 0x10 /* 0: counting, 1: fired */ 93 #define WB_LDN8_CRF7_IRQS 0x0f /* irq source for watchdog, 2 == SMI */ 94 95 enum chips { w83627hf, w83627s, w83697hf, w83697ug, w83637hf, w83627thf, 96 w83687thf, w83627ehf, w83627dhg, w83627uhg, w83667hg, 97 w83627dhg_p, w83667hg_b, nct6775, nct6776, nct6779, nct6791, 98 nct6792, nct6793, nct6795, nct6102 }; 99 100 struct wb_softc { 101 device_t dev; 102 eventhandler_tag ev_tag; 103 enum chips chip; 104 uint8_t ctl_reg; 105 uint8_t time_reg; 106 uint8_t csr_reg; 107 int debug_verbose; 108 109 /* 110 * Special feature to let the watchdog fire at a different 111 * timeout as set by watchdog(4) but still use that API to 112 * re-load it periodically. 113 */ 114 unsigned int timeout_override; 115 116 /* 117 * Space to save current state temporary and for sysctls. 118 * We want to know the timeout value and usually need two 119 * additional registers for options. Do not name them by 120 * register as these might be different by chip. 121 */ 122 uint8_t reg_timeout; 123 uint8_t reg_1; 124 uint8_t reg_2; 125 }; 126 127 struct winbond_vendor_device_id { 128 uint8_t device_id; 129 enum chips chip; 130 const char * descr; 131 } wb_devs[] = { 132 { 133 .device_id = 0x52, 134 .chip = w83627hf, 135 .descr = "Winbond 83627HF/F/HG/G", 136 }, 137 { 138 .device_id = 0x59, 139 .chip = w83627s, 140 .descr = "Winbond 83627S", 141 }, 142 { 143 .device_id = 0x60, 144 .chip = w83697hf, 145 .descr = "Winbond 83697HF", 146 }, 147 { 148 .device_id = 0x68, 149 .chip = w83697ug, 150 .descr = "Winbond 83697UG", 151 }, 152 { 153 .device_id = 0x70, 154 .chip = w83637hf, 155 .descr = "Winbond 83637HF", 156 }, 157 { 158 .device_id = 0x82, 159 .chip = w83627thf, 160 .descr = "Winbond 83627THF", 161 }, 162 { 163 .device_id = 0x85, 164 .chip = w83687thf, 165 .descr = "Winbond 83687THF", 166 }, 167 { 168 .device_id = 0x88, 169 .chip = w83627ehf, 170 .descr = "Winbond 83627EHF", 171 }, 172 { 173 .device_id = 0xa0, 174 .chip = w83627dhg, 175 .descr = "Winbond 83627DHG", 176 }, 177 { 178 .device_id = 0xa2, 179 .chip = w83627uhg, 180 .descr = "Winbond 83627UHG", 181 }, 182 { 183 .device_id = 0xa5, 184 .chip = w83667hg, 185 .descr = "Winbond 83667HG", 186 }, 187 { 188 .device_id = 0xb0, 189 .chip = w83627dhg_p, 190 .descr = "Winbond 83627DHG-P", 191 }, 192 { 193 .device_id = 0xb3, 194 .chip = w83667hg_b, 195 .descr = "Winbond 83667HG-B", 196 }, 197 { 198 .device_id = 0xb4, 199 .chip = nct6775, 200 .descr = "Nuvoton NCT6775", 201 }, 202 { 203 .device_id = 0xc3, 204 .chip = nct6776, 205 .descr = "Nuvoton NCT6776", 206 }, 207 { 208 .device_id = 0xc4, 209 .chip = nct6102, 210 .descr = "Nuvoton NCT6102", 211 }, 212 { 213 .device_id = 0xc5, 214 .chip = nct6779, 215 .descr = "Nuvoton NCT6779", 216 }, 217 { 218 .device_id = 0xc8, 219 .chip = nct6791, 220 .descr = "Nuvoton NCT6791", 221 }, 222 { 223 .device_id = 0xc9, 224 .chip = nct6792, 225 .descr = "Nuvoton NCT6792", 226 }, 227 { 228 .device_id = 0xd1, 229 .chip = nct6793, 230 .descr = "Nuvoton NCT6793", 231 }, 232 { 233 .device_id = 0xd3, 234 .chip = nct6795, 235 .descr = "Nuvoton NCT6795", 236 }, 237 }; 238 239 /* 240 * Return the watchdog related registers as we last read them. This will 241 * usually not give the current timeout or state on whether the watchdog 242 * fired. 243 */ 244 static int 245 sysctl_wb_debug(SYSCTL_HANDLER_ARGS) 246 { 247 struct wb_softc *sc; 248 struct sbuf sb; 249 int error; 250 251 sc = arg1; 252 253 sbuf_new_for_sysctl(&sb, NULL, 64, req); 254 255 sbuf_printf(&sb, "LDN8 (GPIO2, Watchdog): "); 256 sbuf_printf(&sb, "CR%02X 0x%02x ", sc->ctl_reg, sc->reg_1); 257 sbuf_printf(&sb, "CR%02X 0x%02x ", sc->time_reg, sc->reg_timeout); 258 sbuf_printf(&sb, "CR%02X 0x%02x", sc->csr_reg, sc->reg_2); 259 260 error = sbuf_finish(&sb); 261 sbuf_delete(&sb); 262 return (error); 263 } 264 265 /* 266 * Read the current values before returning them. Given this might poke 267 * the registers the same time as the watchdog, this sysctl handler should 268 * be marked CTLFLAG_SKIP to not show up by default. 269 */ 270 static int 271 sysctl_wb_debug_current(SYSCTL_HANDLER_ARGS) 272 { 273 struct wb_softc *sc; 274 275 sc = arg1; 276 277 sc->reg_1 = superio_read(sc->dev, sc->ctl_reg); 278 sc->reg_timeout = superio_read(sc->dev, sc->time_reg); 279 sc->reg_2 = superio_read(sc->dev, sc->csr_reg); 280 281 return (sysctl_wb_debug(oidp, arg1, arg2, req)); 282 } 283 284 /* 285 * Sysctl handlers to force a watchdog timeout or to test the NMI functionality 286 * works as expetced. 287 * For testing we could set a test_nmi flag in the softc that, in case of NMI, a 288 * callback function from trap.c could check whether we fired and not report the 289 * timeout but clear the flag for the sysctl again. This is interesting given a 290 * lot of boards have jumpers to change the action on watchdog timeout or 291 * disable the watchdog completely. 292 * XXX-BZ notyet: currently no general infrastructure exists to do this. 293 */ 294 static int 295 sysctl_wb_force_test_nmi(SYSCTL_HANDLER_ARGS) 296 { 297 struct wb_softc *sc; 298 int error, val; 299 300 sc = arg1; 301 302 #ifdef notyet 303 val = sc->test_nmi; 304 #else 305 val = 0; 306 #endif 307 error = sysctl_handle_int(oidp, &val, 0, req); 308 if (error || !req->newptr) 309 return (error); 310 311 #ifdef notyet 312 int test = arg2; 313 314 /* Manually clear the test for a value of 0 and do nothing else. */ 315 if (test && val == 0) { 316 sc->test_nmi = 0; 317 return (0); 318 } 319 320 /* 321 * If we are testing the NMI functionality, set the flag before 322 * forcing the timeout. 323 */ 324 if (test) 325 sc->test_nmi = 1; 326 #endif 327 328 /* Force watchdog to fire. */ 329 sc->reg_2 = superio_read(sc->dev, sc->csr_reg); 330 sc->reg_2 |= WB_LDN8_CRF7_FORCE; 331 superio_write(sc->dev, sc->csr_reg, sc->reg_2); 332 333 return (0); 334 } 335 336 /* 337 * Print current watchdog state. 338 * 339 * Note: it is the responsibility of the caller to update the registers 340 * upfront. 341 */ 342 static void 343 wb_print_state(struct wb_softc *sc, const char *msg) 344 { 345 346 device_printf(sc->dev, "%s%sWatchdog %sabled. %s" 347 "Scaling by %ds, timer at %d (%s=%ds%s). " 348 "CR%02X 0x%02x CR%02X 0x%02x\n", 349 (msg != NULL) ? msg : "", (msg != NULL) ? ": " : "", 350 (sc->reg_timeout > 0x00) ? "en" : "dis", 351 (sc->reg_2 & WB_LDN8_CRF7_TS) ? "Watchdog fired. " : "", 352 (sc->reg_1 & WB_LDN8_CRF5_SCALE) ? 60 : 1, 353 sc->reg_timeout, 354 (sc->reg_timeout > 0x00) ? "<" : "", 355 sc->reg_timeout * ((sc->reg_1 & WB_LDN8_CRF5_SCALE) ? 60 : 1), 356 (sc->reg_timeout > 0x00) ? " left" : "", 357 sc->ctl_reg, sc->reg_1, sc->csr_reg, sc->reg_2); 358 } 359 360 /* 361 * (Re)load the watchdog counter depending on timeout. A timeout of 0 will 362 * disable the watchdog. 363 */ 364 static int 365 wb_set_watchdog(struct wb_softc *sc, unsigned int timeout) 366 { 367 368 if (timeout != 0) { 369 /* 370 * In case an override is set, let it override. It may lead 371 * to strange results as we do not check the input of the sysctl. 372 */ 373 if (sc->timeout_override > 0) 374 timeout = sc->timeout_override; 375 376 /* Make sure we support the requested timeout. */ 377 if (timeout > 255 * 60) 378 return (EINVAL); 379 } 380 381 if (sc->debug_verbose) 382 wb_print_state(sc, "Before watchdog counter (re)load"); 383 384 if (timeout == 0) { 385 /* Disable watchdog. */ 386 sc->reg_timeout = 0; 387 superio_write(sc->dev, sc->time_reg, sc->reg_timeout); 388 389 } else { 390 /* Read current scaling factor. */ 391 sc->reg_1 = superio_read(sc->dev, sc->ctl_reg); 392 393 if (timeout > 255) { 394 /* Set scaling factor to 60s. */ 395 sc->reg_1 |= WB_LDN8_CRF5_SCALE; 396 sc->reg_timeout = (timeout / 60); 397 if (timeout % 60) 398 sc->reg_timeout++; 399 } else { 400 /* Set scaling factor to 1s. */ 401 sc->reg_1 &= ~WB_LDN8_CRF5_SCALE; 402 sc->reg_timeout = timeout; 403 } 404 405 /* In case we fired before we need to clear to fire again. */ 406 sc->reg_2 = superio_read(sc->dev, sc->csr_reg); 407 if (sc->reg_2 & WB_LDN8_CRF7_TS) { 408 sc->reg_2 &= ~WB_LDN8_CRF7_TS; 409 superio_write(sc->dev, sc->csr_reg, sc->reg_2); 410 } 411 412 /* Write back scaling factor. */ 413 superio_write(sc->dev, sc->ctl_reg, sc->reg_1); 414 415 /* Set timer and arm/reset the watchdog. */ 416 superio_write(sc->dev, sc->time_reg, sc->reg_timeout); 417 } 418 419 if (sc->debug_verbose) 420 wb_print_state(sc, "After watchdog counter (re)load"); 421 return (0); 422 } 423 424 /* 425 * watchdog(9) EVENTHANDLER function implementation to (re)load the counter 426 * with the given timeout or disable the watchdog. 427 */ 428 static void 429 wb_watchdog_fn(void *private, u_int cmd, int *error) 430 { 431 struct wb_softc *sc; 432 unsigned int timeout; 433 int e; 434 435 sc = private; 436 KASSERT(sc != NULL, ("%s: watchdog handler function called without " 437 "softc.", __func__)); 438 439 cmd &= WD_INTERVAL; 440 if (cmd > 0 && cmd <= 63) { 441 /* Reset (and arm) watchdog. */ 442 timeout = ((uint64_t)1 << cmd) / 1000000000; 443 if (timeout == 0) 444 timeout = 1; 445 e = wb_set_watchdog(sc, timeout); 446 if (e == 0) { 447 if (error != NULL) 448 *error = 0; 449 } else { 450 /* On error, try to make sure the WD is disabled. */ 451 wb_set_watchdog(sc, 0); 452 } 453 454 } else { 455 /* Disable watchdog. */ 456 e = wb_set_watchdog(sc, 0); 457 if (e != 0 && cmd == 0 && error != NULL) { 458 /* Failed to disable watchdog. */ 459 *error = EOPNOTSUPP; 460 } 461 } 462 } 463 464 static int 465 wb_probe(device_t dev) 466 { 467 char buf[128]; 468 struct wb_softc *sc; 469 int j; 470 uint8_t devid; 471 uint8_t revid; 472 473 if (superio_vendor(dev) != SUPERIO_VENDOR_NUVOTON) 474 return (ENXIO); 475 if (superio_get_type(dev) != SUPERIO_DEV_WDT) 476 return (ENXIO); 477 478 sc = device_get_softc(dev); 479 devid = superio_devid(dev) >> 8; 480 revid = superio_revid(dev); 481 for (j = 0; j < nitems(wb_devs); j++) { 482 if (wb_devs[j].device_id == devid) { 483 sc->chip = wb_devs[j].chip; 484 snprintf(buf, sizeof(buf), 485 "%s (0x%02x/0x%02x) Watchdog Timer", 486 wb_devs[j].descr, devid, revid); 487 device_set_desc_copy(dev, buf); 488 return (BUS_PROBE_SPECIFIC); 489 } 490 } 491 if (bootverbose) { 492 device_printf(dev, 493 "unrecognized chip: devid 0x%02x, revid 0x%02x\n", 494 devid, revid); 495 } 496 return (ENXIO); 497 } 498 499 static int 500 wb_attach(device_t dev) 501 { 502 struct wb_softc *sc; 503 struct sysctl_ctx_list *sctx; 504 struct sysctl_oid *soid; 505 unsigned long timeout; 506 uint8_t t; 507 508 sc = device_get_softc(dev); 509 sc->dev = dev; 510 511 /* Make sure WDT is enabled. */ 512 superio_dev_enable(dev, WB_LDN8_CR30_ACTIVE); 513 514 switch (sc->chip) { 515 case w83697hf: 516 case w83697ug: 517 sc->ctl_reg = 0xf3; 518 sc->time_reg = 0xf4; 519 sc->csr_reg = 0xf7; 520 break; 521 case nct6102: 522 sc->ctl_reg = 0xf0; 523 sc->time_reg = 0xf1; 524 sc->csr_reg = 0xf2; 525 break; 526 default: 527 sc->ctl_reg = 0xf5; 528 sc->time_reg = 0xf6; 529 sc->csr_reg = 0xf7; 530 break; 531 } 532 533 switch (sc->chip) { 534 case w83627hf: 535 case w83627s: 536 t = superio_read(dev, 0x2B) & ~0x10; 537 superio_write(dev, 0x2B, t); /* set GPIO24 to WDT0 */ 538 break; 539 case w83697hf: 540 /* Set pin 119 to WDTO# mode (= CR29, WDT0) */ 541 t = superio_read(dev, 0x29) & ~0x60; 542 t |= 0x20; 543 superio_write(dev, 0x29, t); 544 break; 545 case w83697ug: 546 /* Set pin 118 to WDTO# mode */ 547 t = superio_read(dev, 0x2b) & ~0x04; 548 superio_write(dev, 0x2b, t); 549 break; 550 case w83627thf: 551 t = (superio_read(dev, 0x2B) & ~0x08) | 0x04; 552 superio_write(dev, 0x2B, t); /* set GPIO3 to WDT0 */ 553 break; 554 case w83627dhg: 555 case w83627dhg_p: 556 t = superio_read(dev, 0x2D) & ~0x01; /* PIN77 -> WDT0# */ 557 superio_write(dev, 0x2D, t); /* set GPIO5 to WDT0 */ 558 t = superio_read(dev, sc->ctl_reg); 559 t |= 0x02; /* enable the WDTO# output low pulse 560 * to the KBRST# pin */ 561 superio_write(dev, sc->ctl_reg, t); 562 break; 563 case w83637hf: 564 break; 565 case w83687thf: 566 t = superio_read(dev, 0x2C) & ~0x80; /* PIN47 -> WDT0# */ 567 superio_write(dev, 0x2C, t); 568 break; 569 case w83627ehf: 570 case w83627uhg: 571 case w83667hg: 572 case w83667hg_b: 573 case nct6775: 574 case nct6776: 575 case nct6779: 576 case nct6791: 577 case nct6792: 578 case nct6793: 579 case nct6795: 580 case nct6102: 581 /* 582 * These chips have a fixed WDTO# output pin (W83627UHG), 583 * or support more than one WDTO# output pin. 584 * Don't touch its configuration, and hope the BIOS 585 * does the right thing. 586 */ 587 t = superio_read(dev, sc->ctl_reg); 588 t |= 0x02; /* enable the WDTO# output low pulse 589 * to the KBRST# pin */ 590 superio_write(dev, sc->ctl_reg, t); 591 break; 592 default: 593 break; 594 } 595 596 /* Read the current watchdog configuration. */ 597 sc->reg_1 = superio_read(dev, sc->ctl_reg); 598 sc->reg_timeout = superio_read(dev, sc->time_reg); 599 sc->reg_2 = superio_read(dev, sc->csr_reg); 600 601 /* Print current state if bootverbose or watchdog already enabled. */ 602 if (bootverbose || (sc->reg_timeout > 0x00)) 603 wb_print_state(sc, "Before watchdog attach"); 604 605 sc->reg_1 &= ~WB_LDN8_CRF5_KEYB_P20; 606 sc->reg_1 |= WB_LDN8_CRF5_KBRST; 607 superio_write(dev, sc->ctl_reg, sc->reg_1); 608 609 /* 610 * Clear a previous watchdog timeout event (if still set). 611 * Disable timer reset on mouse interrupts. Leave reset on keyboard, 612 * since one of my boards is getting stuck in reboot without it. 613 */ 614 sc->reg_2 &= ~(WB_LDN8_CRF7_MOUSE|WB_LDN8_CRF7_TS); 615 superio_write(dev, sc->csr_reg, sc->reg_2); 616 617 /* Read global timeout override tunable, Add per device sysctls. */ 618 if (TUNABLE_ULONG_FETCH("hw.wbwd.timeout_override", &timeout)) { 619 if (timeout > 0) 620 sc->timeout_override = timeout; 621 } 622 sctx = device_get_sysctl_ctx(dev); 623 soid = device_get_sysctl_tree(dev); 624 SYSCTL_ADD_UINT(sctx, SYSCTL_CHILDREN(soid), OID_AUTO, 625 "timeout_override", CTLFLAG_RW, &sc->timeout_override, 0, 626 "Timeout in seconds overriding default watchdog timeout"); 627 SYSCTL_ADD_INT(sctx, SYSCTL_CHILDREN(soid), OID_AUTO, 628 "debug_verbose", CTLFLAG_RW, &sc->debug_verbose, 0, 629 "Enables extra debugging information"); 630 SYSCTL_ADD_PROC(sctx, SYSCTL_CHILDREN(soid), OID_AUTO, "debug", 631 CTLTYPE_STRING | CTLFLAG_RD | CTLFLAG_MPSAFE, sc, 0, 632 sysctl_wb_debug, "A", 633 "Selected register information from last change by driver"); 634 SYSCTL_ADD_PROC(sctx, SYSCTL_CHILDREN(soid), OID_AUTO, "debug_current", 635 CTLTYPE_STRING | CTLFLAG_RD | CTLFLAG_SKIP | CTLFLAG_MPSAFE, 636 sc, 0, sysctl_wb_debug_current, "A", 637 "Selected register information (may interfere)"); 638 SYSCTL_ADD_PROC(sctx, SYSCTL_CHILDREN(soid), OID_AUTO, "force_timeout", 639 CTLTYPE_INT | CTLFLAG_RW | CTLFLAG_SKIP | CTLFLAG_MPSAFE, sc, 0, 640 sysctl_wb_force_test_nmi, "I", "Enable to force watchdog to fire."); 641 642 /* Register watchdog. */ 643 sc->ev_tag = EVENTHANDLER_REGISTER(watchdog_list, wb_watchdog_fn, sc, 644 0); 645 646 if (bootverbose) 647 wb_print_state(sc, "After watchdog attach"); 648 649 return (0); 650 } 651 652 static int 653 wb_detach(device_t dev) 654 { 655 struct wb_softc *sc; 656 657 sc = device_get_softc(dev); 658 659 /* Unregister and stop the watchdog if running. */ 660 if (sc->ev_tag) 661 EVENTHANDLER_DEREGISTER(watchdog_list, sc->ev_tag); 662 wb_set_watchdog(sc, 0); 663 664 /* Bus subroutines take care of sysctls already. */ 665 666 return (0); 667 } 668 669 static device_method_t wb_methods[] = { 670 /* Device interface */ 671 DEVMETHOD(device_probe, wb_probe), 672 DEVMETHOD(device_attach, wb_attach), 673 DEVMETHOD(device_detach, wb_detach), 674 675 DEVMETHOD_END 676 }; 677 678 static driver_t wb_driver = { 679 "wbwd", 680 wb_methods, 681 sizeof(struct wb_softc) 682 }; 683 684 DRIVER_MODULE(wb, superio, wb_driver, NULL, NULL); 685 MODULE_DEPEND(wb, superio, 1, 1, 1); 686 MODULE_VERSION(wb, 1); 687