1 /*- 2 * Copyright (c) 2008,2010 Damien Bergamini <damien.bergamini@free.fr> 3 * ported to FreeBSD by Akinori Furukoshi <moonlightakkiy@yahoo.ca> 4 * USB Consulting, Hans Petter Selasky <hselasky@freebsd.org> 5 * Copyright (c) 2013-2014 Kevin Lo 6 * 7 * Permission to use, copy, modify, and distribute this software for any 8 * purpose with or without fee is hereby granted, provided that the above 9 * copyright notice and this permission notice appear in all copies. 10 * 11 * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES 12 * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF 13 * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR 14 * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES 15 * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN 16 * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF 17 * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. 18 */ 19 20 #include <sys/cdefs.h> 21 /*- 22 * Ralink Technology RT2700U/RT2800U/RT3000U/RT3900E chipset driver. 23 * http://www.ralinktech.com/ 24 */ 25 26 #include "opt_wlan.h" 27 28 #include <sys/param.h> 29 #include <sys/eventhandler.h> 30 #include <sys/sockio.h> 31 #include <sys/sysctl.h> 32 #include <sys/lock.h> 33 #include <sys/mutex.h> 34 #include <sys/mbuf.h> 35 #include <sys/kernel.h> 36 #include <sys/socket.h> 37 #include <sys/systm.h> 38 #include <sys/malloc.h> 39 #include <sys/module.h> 40 #include <sys/bus.h> 41 #include <sys/endian.h> 42 #include <sys/linker.h> 43 #include <sys/firmware.h> 44 #include <sys/kdb.h> 45 46 #include <net/bpf.h> 47 #include <net/if.h> 48 #include <net/if_var.h> 49 #include <net/if_arp.h> 50 #include <net/ethernet.h> 51 #include <net/if_dl.h> 52 #include <net/if_media.h> 53 #include <net/if_types.h> 54 55 #include <netinet/in.h> 56 #include <netinet/in_systm.h> 57 #include <netinet/in_var.h> 58 #include <netinet/if_ether.h> 59 #include <netinet/ip.h> 60 61 #include <net80211/ieee80211_var.h> 62 #include <net80211/ieee80211_regdomain.h> 63 #include <net80211/ieee80211_radiotap.h> 64 #include <net80211/ieee80211_ratectl.h> 65 #ifdef IEEE80211_SUPPORT_SUPERG 66 #include <net80211/ieee80211_superg.h> 67 #endif 68 69 #include <dev/usb/usb.h> 70 #include <dev/usb/usbdi.h> 71 #include "usbdevs.h" 72 73 #define USB_DEBUG_VAR run_debug 74 #include <dev/usb/usb_debug.h> 75 #include <dev/usb/usb_msctest.h> 76 77 #include <dev/usb/wlan/if_runreg.h> 78 #include <dev/usb/wlan/if_runvar.h> 79 80 #ifdef USB_DEBUG 81 #define RUN_DEBUG 82 #endif 83 84 #ifdef RUN_DEBUG 85 int run_debug = 0; 86 static SYSCTL_NODE(_hw_usb, OID_AUTO, run, CTLFLAG_RW | CTLFLAG_MPSAFE, 0, 87 "USB run"); 88 SYSCTL_INT(_hw_usb_run, OID_AUTO, debug, CTLFLAG_RWTUN, &run_debug, 0, 89 "run debug level"); 90 91 enum { 92 RUN_DEBUG_XMIT = 0x00000001, /* basic xmit operation */ 93 RUN_DEBUG_XMIT_DESC = 0x00000002, /* xmit descriptors */ 94 RUN_DEBUG_RECV = 0x00000004, /* basic recv operation */ 95 RUN_DEBUG_RECV_DESC = 0x00000008, /* recv descriptors */ 96 RUN_DEBUG_STATE = 0x00000010, /* 802.11 state transitions */ 97 RUN_DEBUG_RATE = 0x00000020, /* rate adaptation */ 98 RUN_DEBUG_USB = 0x00000040, /* usb requests */ 99 RUN_DEBUG_FIRMWARE = 0x00000080, /* firmware(9) loading debug */ 100 RUN_DEBUG_BEACON = 0x00000100, /* beacon handling */ 101 RUN_DEBUG_INTR = 0x00000200, /* ISR */ 102 RUN_DEBUG_TEMP = 0x00000400, /* temperature calibration */ 103 RUN_DEBUG_ROM = 0x00000800, /* various ROM info */ 104 RUN_DEBUG_KEY = 0x00001000, /* crypto keys management */ 105 RUN_DEBUG_TXPWR = 0x00002000, /* dump Tx power values */ 106 RUN_DEBUG_RSSI = 0x00004000, /* dump RSSI lookups */ 107 RUN_DEBUG_RESET = 0x00008000, /* initialization progress */ 108 RUN_DEBUG_CALIB = 0x00010000, /* calibration progress */ 109 RUN_DEBUG_CMD = 0x00020000, /* command queue */ 110 RUN_DEBUG_ANY = 0xffffffff 111 }; 112 113 #define RUN_DPRINTF(_sc, _m, ...) do { \ 114 if (run_debug & (_m)) \ 115 device_printf((_sc)->sc_dev, __VA_ARGS__); \ 116 } while(0) 117 #else 118 #define RUN_DPRINTF(_sc, _m, ...) do { (void) _sc; } while (0) 119 #endif 120 121 #define IEEE80211_HAS_ADDR4(wh) IEEE80211_IS_DSTODS(wh) 122 123 /* 124 * Because of LOR in run_key_delete(), use atomic instead. 125 * '& RUN_CMDQ_MASQ' is to loop cmdq[]. 126 */ 127 #define RUN_CMDQ_GET(c) (atomic_fetchadd_32((c), 1) & RUN_CMDQ_MASQ) 128 129 static const STRUCT_USB_HOST_ID run_devs[] = { 130 #define RUN_DEV(v,p) { USB_VP(USB_VENDOR_##v, USB_PRODUCT_##v##_##p) } 131 #define RUN_DEV_EJECT(v,p) \ 132 { USB_VPI(USB_VENDOR_##v, USB_PRODUCT_##v##_##p, RUN_EJECT) } 133 #define RUN_EJECT 1 134 RUN_DEV(ABOCOM, RT2770), 135 RUN_DEV(ABOCOM, RT2870), 136 RUN_DEV(ABOCOM, RT3070), 137 RUN_DEV(ABOCOM, RT3071), 138 RUN_DEV(ABOCOM, RT3072), 139 RUN_DEV(ABOCOM2, RT2870_1), 140 RUN_DEV(ACCTON, RT2770), 141 RUN_DEV(ACCTON, RT2870_1), 142 RUN_DEV(ACCTON, RT2870_2), 143 RUN_DEV(ACCTON, RT2870_3), 144 RUN_DEV(ACCTON, RT2870_4), 145 RUN_DEV(ACCTON, RT2870_5), 146 RUN_DEV(ACCTON, RT3070), 147 RUN_DEV(ACCTON, RT3070_1), 148 RUN_DEV(ACCTON, RT3070_2), 149 RUN_DEV(ACCTON, RT3070_3), 150 RUN_DEV(ACCTON, RT3070_4), 151 RUN_DEV(ACCTON, RT3070_5), 152 RUN_DEV(AIRTIES, RT3070), 153 RUN_DEV(ALLWIN, RT2070), 154 RUN_DEV(ALLWIN, RT2770), 155 RUN_DEV(ALLWIN, RT2870), 156 RUN_DEV(ALLWIN, RT3070), 157 RUN_DEV(ALLWIN, RT3071), 158 RUN_DEV(ALLWIN, RT3072), 159 RUN_DEV(ALLWIN, RT3572), 160 RUN_DEV(AMIGO, RT2870_1), 161 RUN_DEV(AMIGO, RT2870_2), 162 RUN_DEV(AMIT, CGWLUSB2GNR), 163 RUN_DEV(AMIT, RT2870_1), 164 RUN_DEV(AMIT2, RT2870), 165 RUN_DEV(ASUS, RT2870_1), 166 RUN_DEV(ASUS, RT2870_2), 167 RUN_DEV(ASUS, RT2870_3), 168 RUN_DEV(ASUS, RT2870_4), 169 RUN_DEV(ASUS, RT2870_5), 170 RUN_DEV(ASUS, USBN13), 171 RUN_DEV(ASUS, RT3070_1), 172 RUN_DEV(ASUS, USBN66), 173 RUN_DEV(ASUS, USB_N53), 174 RUN_DEV(ASUS, USBN14), 175 RUN_DEV(ASUS2, USBN11), 176 RUN_DEV(AZUREWAVE, RT2870_1), 177 RUN_DEV(AZUREWAVE, RT2870_2), 178 RUN_DEV(AZUREWAVE, RT3070_1), 179 RUN_DEV(AZUREWAVE, RT3070_2), 180 RUN_DEV(AZUREWAVE, RT3070_3), 181 RUN_DEV(BELKIN, F9L1103), 182 RUN_DEV(BELKIN, F5D8053V3), 183 RUN_DEV(BELKIN, F5D8055), 184 RUN_DEV(BELKIN, F5D8055V2), 185 RUN_DEV(BELKIN, F6D4050V1), 186 RUN_DEV(BELKIN, F6D4050V2), 187 RUN_DEV(BELKIN, RT2870_1), 188 RUN_DEV(BELKIN, RT2870_2), 189 RUN_DEV(CISCOLINKSYS, AE1000), 190 RUN_DEV(CISCOLINKSYS2, RT3070), 191 RUN_DEV(CISCOLINKSYS3, RT3070), 192 RUN_DEV(CONCEPTRONIC2, RT2870_1), 193 RUN_DEV(CONCEPTRONIC2, RT2870_2), 194 RUN_DEV(CONCEPTRONIC2, RT2870_3), 195 RUN_DEV(CONCEPTRONIC2, RT2870_4), 196 RUN_DEV(CONCEPTRONIC2, RT2870_5), 197 RUN_DEV(CONCEPTRONIC2, RT2870_6), 198 RUN_DEV(CONCEPTRONIC2, RT2870_7), 199 RUN_DEV(CONCEPTRONIC2, RT2870_8), 200 RUN_DEV(CONCEPTRONIC2, RT3070_1), 201 RUN_DEV(CONCEPTRONIC2, RT3070_2), 202 RUN_DEV(CONCEPTRONIC2, VIGORN61), 203 RUN_DEV(COREGA, CGWLUSB300GNM), 204 RUN_DEV(COREGA, RT2870_1), 205 RUN_DEV(COREGA, RT2870_2), 206 RUN_DEV(COREGA, RT2870_3), 207 RUN_DEV(COREGA, RT3070), 208 RUN_DEV(CYBERTAN, RT2870), 209 RUN_DEV(DLINK, RT2870), 210 RUN_DEV(DLINK, RT3072), 211 RUN_DEV(DLINK, DWA125A3), 212 RUN_DEV(DLINK, DWA127), 213 RUN_DEV(DLINK, DWA140B3), 214 RUN_DEV(DLINK, DWA160B2), 215 RUN_DEV(DLINK, DWA140D1), 216 RUN_DEV(DLINK, DWA130F1), 217 RUN_DEV(DLINK, DWA162), 218 RUN_DEV(DLINK2, DWA130), 219 RUN_DEV(DLINK2, RT2870_1), 220 RUN_DEV(DLINK2, RT2870_2), 221 RUN_DEV(DLINK2, RT3070_1), 222 RUN_DEV(DLINK2, RT3070_2), 223 RUN_DEV(DLINK2, RT3070_3), 224 RUN_DEV(DLINK2, RT3070_4), 225 RUN_DEV(DLINK2, RT3070_5), 226 RUN_DEV(DLINK2, RT3072), 227 RUN_DEV(DLINK2, RT3072_1), 228 RUN_DEV(EDIMAX, EW7717), 229 RUN_DEV(EDIMAX, EW7718), 230 RUN_DEV(EDIMAX, EW7733UND), 231 RUN_DEV(EDIMAX, RT2870_1), 232 RUN_DEV(ENCORE, RT3070_1), 233 RUN_DEV(ENCORE, RT3070_2), 234 RUN_DEV(ENCORE, RT3070_3), 235 RUN_DEV(GIGABYTE, GNWB31N), 236 RUN_DEV(GIGABYTE, GNWB32L), 237 RUN_DEV(GIGABYTE, RT2870_1), 238 RUN_DEV(GIGASET, RT3070_1), 239 RUN_DEV(GIGASET, RT3070_2), 240 RUN_DEV(GUILLEMOT, HWNU300), 241 RUN_DEV(HAWKING, HWUN2), 242 RUN_DEV(HAWKING, RT2870_1), 243 RUN_DEV(HAWKING, RT2870_2), 244 RUN_DEV(HAWKING, RT3070), 245 RUN_DEV(IODATA, RT3072_1), 246 RUN_DEV(IODATA, RT3072_2), 247 RUN_DEV(IODATA, RT3072_3), 248 RUN_DEV(IODATA, RT3072_4), 249 RUN_DEV(LINKSYS4, RT3070), 250 RUN_DEV(LINKSYS4, WUSB100), 251 RUN_DEV(LINKSYS4, WUSB54GCV3), 252 RUN_DEV(LINKSYS4, WUSB600N), 253 RUN_DEV(LINKSYS4, WUSB600NV2), 254 RUN_DEV(LOGITEC, RT2870_1), 255 RUN_DEV(LOGITEC, RT2870_2), 256 RUN_DEV(LOGITEC, RT2870_3), 257 RUN_DEV(LOGITEC, LANW300NU2), 258 RUN_DEV(LOGITEC, LANW150NU2), 259 RUN_DEV(LOGITEC, LANW300NU2S), 260 RUN_DEV(MELCO, WLIUCG300HP), 261 RUN_DEV(MELCO, RT2870_2), 262 RUN_DEV(MELCO, WLIUCAG300N), 263 RUN_DEV(MELCO, WLIUCG300N), 264 RUN_DEV(MELCO, WLIUCG301N), 265 RUN_DEV(MELCO, WLIUCGN), 266 RUN_DEV(MELCO, WLIUCGNM), 267 RUN_DEV(MELCO, WLIUCG300HPV1), 268 RUN_DEV(MELCO, WLIUCGNM2), 269 RUN_DEV(MOTOROLA4, RT2770), 270 RUN_DEV(MOTOROLA4, RT3070), 271 RUN_DEV(MSI, RT3070_1), 272 RUN_DEV(MSI, RT3070_2), 273 RUN_DEV(MSI, RT3070_3), 274 RUN_DEV(MSI, RT3070_4), 275 RUN_DEV(MSI, RT3070_5), 276 RUN_DEV(MSI, RT3070_6), 277 RUN_DEV(MSI, RT3070_7), 278 RUN_DEV(MSI, RT3070_8), 279 RUN_DEV(MSI, RT3070_9), 280 RUN_DEV(MSI, RT3070_10), 281 RUN_DEV(MSI, RT3070_11), 282 RUN_DEV(NETGEAR, WNDA4100), 283 RUN_DEV(OVISLINK, RT3072), 284 RUN_DEV(PARA, RT3070), 285 RUN_DEV(PEGATRON, RT2870), 286 RUN_DEV(PEGATRON, RT3070), 287 RUN_DEV(PEGATRON, RT3070_2), 288 RUN_DEV(PEGATRON, RT3070_3), 289 RUN_DEV(PHILIPS, RT2870), 290 RUN_DEV(PLANEX2, GWUS300MINIS), 291 RUN_DEV(PLANEX2, GWUSMICRON), 292 RUN_DEV(PLANEX2, RT2870), 293 RUN_DEV(PLANEX2, RT3070), 294 RUN_DEV(QCOM, RT2870), 295 RUN_DEV(QUANTA, RT3070), 296 RUN_DEV(RALINK, RT2070), 297 RUN_DEV(RALINK, RT2770), 298 RUN_DEV(RALINK, RT2870), 299 RUN_DEV(RALINK, RT3070), 300 RUN_DEV(RALINK, RT3071), 301 RUN_DEV(RALINK, RT3072), 302 RUN_DEV(RALINK, RT3370), 303 RUN_DEV(RALINK, RT3572), 304 RUN_DEV(RALINK, RT3573), 305 RUN_DEV(RALINK, RT5370), 306 RUN_DEV(RALINK, RT5372), 307 RUN_DEV(RALINK, RT5572), 308 RUN_DEV(RALINK, RT8070), 309 RUN_DEV(SAMSUNG, WIS09ABGN), 310 RUN_DEV(SAMSUNG2, RT2870_1), 311 RUN_DEV(SENAO, RT2870_1), 312 RUN_DEV(SENAO, RT2870_2), 313 RUN_DEV(SENAO, RT2870_3), 314 RUN_DEV(SENAO, RT2870_4), 315 RUN_DEV(SENAO, RT3070), 316 RUN_DEV(SENAO, RT3071), 317 RUN_DEV(SENAO, RT3072_1), 318 RUN_DEV(SENAO, RT3072_2), 319 RUN_DEV(SENAO, RT3072_3), 320 RUN_DEV(SENAO, RT3072_4), 321 RUN_DEV(SENAO, RT3072_5), 322 RUN_DEV(SITECOMEU, RT2770), 323 RUN_DEV(SITECOMEU, RT2870_1), 324 RUN_DEV(SITECOMEU, RT2870_2), 325 RUN_DEV(SITECOMEU, RT2870_3), 326 RUN_DEV(SITECOMEU, RT2870_4), 327 RUN_DEV(SITECOMEU, RT3070), 328 RUN_DEV(SITECOMEU, RT3070_2), 329 RUN_DEV(SITECOMEU, RT3070_3), 330 RUN_DEV(SITECOMEU, RT3070_4), 331 RUN_DEV(SITECOMEU, RT3071), 332 RUN_DEV(SITECOMEU, RT3072_1), 333 RUN_DEV(SITECOMEU, RT3072_2), 334 RUN_DEV(SITECOMEU, RT3072_3), 335 RUN_DEV(SITECOMEU, RT3072_4), 336 RUN_DEV(SITECOMEU, RT3072_5), 337 RUN_DEV(SITECOMEU, RT3072_6), 338 RUN_DEV(SITECOMEU, WL608), 339 RUN_DEV(SPARKLAN, RT2870_1), 340 RUN_DEV(SPARKLAN, RT3070), 341 RUN_DEV(SWEEX2, LW153), 342 RUN_DEV(SWEEX2, LW303), 343 RUN_DEV(SWEEX2, LW313), 344 RUN_DEV(TOSHIBA, RT3070), 345 RUN_DEV(UMEDIA, RT2870_1), 346 RUN_DEV(ZCOM, RT2870_1), 347 RUN_DEV(ZCOM, RT2870_2), 348 RUN_DEV(ZINWELL, RT2870_1), 349 RUN_DEV(ZINWELL, RT2870_2), 350 RUN_DEV(ZINWELL, RT3070), 351 RUN_DEV(ZINWELL, RT3072_1), 352 RUN_DEV(ZINWELL, RT3072_2), 353 RUN_DEV(ZYXEL, RT2870_1), 354 RUN_DEV(ZYXEL, RT2870_2), 355 RUN_DEV(ZYXEL, RT3070), 356 RUN_DEV_EJECT(ZYXEL, NWD2705), 357 RUN_DEV_EJECT(RALINK, RT_STOR), 358 #undef RUN_DEV_EJECT 359 #undef RUN_DEV 360 }; 361 362 static device_probe_t run_match; 363 static device_attach_t run_attach; 364 static device_detach_t run_detach; 365 366 static usb_callback_t run_bulk_rx_callback; 367 static usb_callback_t run_bulk_tx_callback0; 368 static usb_callback_t run_bulk_tx_callback1; 369 static usb_callback_t run_bulk_tx_callback2; 370 static usb_callback_t run_bulk_tx_callback3; 371 static usb_callback_t run_bulk_tx_callback4; 372 static usb_callback_t run_bulk_tx_callback5; 373 374 static void run_autoinst(void *, struct usb_device *, 375 struct usb_attach_arg *); 376 static int run_driver_loaded(struct module *, int, void *); 377 static void run_bulk_tx_callbackN(struct usb_xfer *xfer, 378 usb_error_t error, u_int index); 379 static struct ieee80211vap *run_vap_create(struct ieee80211com *, 380 const char [IFNAMSIZ], int, enum ieee80211_opmode, int, 381 const uint8_t [IEEE80211_ADDR_LEN], 382 const uint8_t [IEEE80211_ADDR_LEN]); 383 static void run_vap_delete(struct ieee80211vap *); 384 static void run_cmdq_cb(void *, int); 385 static void run_setup_tx_list(struct run_softc *, 386 struct run_endpoint_queue *); 387 static void run_unsetup_tx_list(struct run_softc *, 388 struct run_endpoint_queue *); 389 static int run_load_microcode(struct run_softc *); 390 static int run_reset(struct run_softc *); 391 static usb_error_t run_do_request(struct run_softc *, 392 struct usb_device_request *, void *); 393 static int run_read(struct run_softc *, uint16_t, uint32_t *); 394 static int run_read_region_1(struct run_softc *, uint16_t, uint8_t *, int); 395 static int run_write_2(struct run_softc *, uint16_t, uint16_t); 396 static int run_write(struct run_softc *, uint16_t, uint32_t); 397 static int run_write_region_1(struct run_softc *, uint16_t, 398 const uint8_t *, int); 399 static int run_set_region_4(struct run_softc *, uint16_t, uint32_t, int); 400 static int run_efuse_read(struct run_softc *, uint16_t, uint16_t *, int); 401 static int run_efuse_read_2(struct run_softc *, uint16_t, uint16_t *); 402 static int run_eeprom_read_2(struct run_softc *, uint16_t, uint16_t *); 403 static int run_rt2870_rf_write(struct run_softc *, uint32_t); 404 static int run_rt3070_rf_read(struct run_softc *, uint8_t, uint8_t *); 405 static int run_rt3070_rf_write(struct run_softc *, uint8_t, uint8_t); 406 static int run_bbp_read(struct run_softc *, uint8_t, uint8_t *); 407 static int run_bbp_write(struct run_softc *, uint8_t, uint8_t); 408 static int run_mcu_cmd(struct run_softc *, uint8_t, uint16_t); 409 static const char *run_get_rf(uint16_t); 410 static void run_rt3593_get_txpower(struct run_softc *); 411 static void run_get_txpower(struct run_softc *); 412 static int run_read_eeprom(struct run_softc *); 413 static struct ieee80211_node *run_node_alloc(struct ieee80211vap *, 414 const uint8_t mac[IEEE80211_ADDR_LEN]); 415 static int run_media_change(if_t); 416 static int run_newstate(struct ieee80211vap *, enum ieee80211_state, int); 417 static int run_wme_update(struct ieee80211com *); 418 static void run_key_set_cb(void *); 419 static int run_key_set(struct ieee80211vap *, struct ieee80211_key *); 420 static void run_key_delete_cb(void *); 421 static int run_key_delete(struct ieee80211vap *, struct ieee80211_key *); 422 static void run_ratectl_to(void *); 423 static void run_ratectl_cb(void *, int); 424 static void run_drain_fifo(void *); 425 static void run_iter_func(void *, struct ieee80211_node *); 426 static void run_newassoc_cb(void *); 427 static void run_newassoc(struct ieee80211_node *, int); 428 static void run_recv_mgmt(struct ieee80211_node *, struct mbuf *, int, 429 const struct ieee80211_rx_stats *, int, int); 430 static void run_rx_frame(struct run_softc *, struct mbuf *, uint32_t); 431 static void run_tx_free(struct run_endpoint_queue *pq, 432 struct run_tx_data *, int); 433 static void run_set_tx_desc(struct run_softc *, struct run_tx_data *); 434 static int run_tx(struct run_softc *, struct mbuf *, 435 struct ieee80211_node *); 436 static int run_tx_mgt(struct run_softc *, struct mbuf *, 437 struct ieee80211_node *); 438 static int run_sendprot(struct run_softc *, const struct mbuf *, 439 struct ieee80211_node *, int, int); 440 static int run_tx_param(struct run_softc *, struct mbuf *, 441 struct ieee80211_node *, 442 const struct ieee80211_bpf_params *); 443 static int run_raw_xmit(struct ieee80211_node *, struct mbuf *, 444 const struct ieee80211_bpf_params *); 445 static int run_transmit(struct ieee80211com *, struct mbuf *); 446 static void run_start(struct run_softc *); 447 static void run_parent(struct ieee80211com *); 448 static void run_iq_calib(struct run_softc *, u_int); 449 static void run_set_agc(struct run_softc *, uint8_t); 450 static void run_select_chan_group(struct run_softc *, int); 451 static void run_set_rx_antenna(struct run_softc *, int); 452 static void run_rt2870_set_chan(struct run_softc *, u_int); 453 static void run_rt3070_set_chan(struct run_softc *, u_int); 454 static void run_rt3572_set_chan(struct run_softc *, u_int); 455 static void run_rt3593_set_chan(struct run_softc *, u_int); 456 static void run_rt5390_set_chan(struct run_softc *, u_int); 457 static void run_rt5592_set_chan(struct run_softc *, u_int); 458 static int run_set_chan(struct run_softc *, struct ieee80211_channel *); 459 static void run_set_channel(struct ieee80211com *); 460 static void run_getradiocaps(struct ieee80211com *, int, int *, 461 struct ieee80211_channel[]); 462 static void run_scan_start(struct ieee80211com *); 463 static void run_scan_end(struct ieee80211com *); 464 static void run_update_beacon(struct ieee80211vap *, int); 465 static void run_update_beacon_cb(void *); 466 static void run_updateprot(struct ieee80211com *); 467 static void run_updateprot_cb(void *); 468 static void run_usb_timeout_cb(void *); 469 static void run_reset_livelock(struct run_softc *); 470 static void run_enable_tsf_sync(struct run_softc *); 471 static void run_enable_tsf(struct run_softc *); 472 static void run_disable_tsf(struct run_softc *); 473 static void run_get_tsf(struct run_softc *, uint64_t *); 474 static void run_enable_mrr(struct run_softc *); 475 static void run_set_txpreamble(struct run_softc *); 476 static void run_set_basicrates(struct run_softc *); 477 static void run_set_leds(struct run_softc *, uint16_t); 478 static void run_set_bssid(struct run_softc *, const uint8_t *); 479 static void run_set_macaddr(struct run_softc *, const uint8_t *); 480 static void run_updateslot(struct ieee80211com *); 481 static void run_updateslot_cb(void *); 482 static void run_update_mcast(struct ieee80211com *); 483 static int8_t run_rssi2dbm(struct run_softc *, uint8_t, uint8_t); 484 static void run_update_promisc_locked(struct run_softc *); 485 static void run_update_promisc(struct ieee80211com *); 486 static void run_rt5390_bbp_init(struct run_softc *); 487 static int run_bbp_init(struct run_softc *); 488 static int run_rt3070_rf_init(struct run_softc *); 489 static void run_rt3593_rf_init(struct run_softc *); 490 static void run_rt5390_rf_init(struct run_softc *); 491 static int run_rt3070_filter_calib(struct run_softc *, uint8_t, uint8_t, 492 uint8_t *); 493 static void run_rt3070_rf_setup(struct run_softc *); 494 static void run_rt3593_rf_setup(struct run_softc *); 495 static void run_rt5390_rf_setup(struct run_softc *); 496 static int run_txrx_enable(struct run_softc *); 497 static void run_adjust_freq_offset(struct run_softc *); 498 static void run_init_locked(struct run_softc *); 499 static void run_stop(void *); 500 static void run_delay(struct run_softc *, u_int); 501 static void run_update_chw(struct ieee80211com *ic); 502 static int run_ampdu_enable(struct ieee80211_node *ni, 503 struct ieee80211_tx_ampdu *tap); 504 505 static eventhandler_tag run_etag; 506 507 static const struct rt2860_rate { 508 uint8_t rate; 509 uint8_t mcs; 510 enum ieee80211_phytype phy; 511 uint8_t ctl_ridx; 512 uint16_t sp_ack_dur; 513 uint16_t lp_ack_dur; 514 } rt2860_rates[] = { 515 /* CCK rates (11b) */ 516 { 2, 0, IEEE80211_T_DS, 0, 314, 314 }, 517 { 4, 1, IEEE80211_T_DS, 1, 258, 162 }, 518 { 11, 2, IEEE80211_T_DS, 2, 223, 127 }, 519 { 22, 3, IEEE80211_T_DS, 3, 213, 117 }, 520 521 /* OFDM rates (11a / 11g) */ 522 { 12, 0, IEEE80211_T_OFDM, 4, 60, 60 }, 523 { 18, 1, IEEE80211_T_OFDM, 4, 52, 52 }, 524 { 24, 2, IEEE80211_T_OFDM, 6, 48, 48 }, 525 { 36, 3, IEEE80211_T_OFDM, 6, 44, 44 }, 526 { 48, 4, IEEE80211_T_OFDM, 8, 44, 44 }, 527 { 72, 5, IEEE80211_T_OFDM, 8, 40, 40 }, 528 { 96, 6, IEEE80211_T_OFDM, 8, 40, 40 }, 529 { 108, 7, IEEE80211_T_OFDM, 8, 40, 40 }, 530 531 /* MCS - single stream */ 532 { 0x80, 0, IEEE80211_T_HT, 4, 60, 60 }, 533 { 0x81, 1, IEEE80211_T_HT, 4, 60, 60 }, 534 { 0x82, 2, IEEE80211_T_HT, 4, 60, 60 }, 535 { 0x83, 3, IEEE80211_T_HT, 4, 60, 60 }, 536 { 0x84, 4, IEEE80211_T_HT, 4, 60, 60 }, 537 { 0x85, 5, IEEE80211_T_HT, 4, 60, 60 }, 538 { 0x86, 6, IEEE80211_T_HT, 4, 60, 60 }, 539 { 0x87, 7, IEEE80211_T_HT, 4, 60, 60 }, 540 541 /* MCS - 2 streams */ 542 { 0x88, 8, IEEE80211_T_HT, 4, 60, 60 }, 543 { 0x89, 9, IEEE80211_T_HT, 4, 60, 60 }, 544 { 0x8a, 10, IEEE80211_T_HT, 4, 60, 60 }, 545 { 0x8b, 11, IEEE80211_T_HT, 4, 60, 60 }, 546 { 0x8c, 12, IEEE80211_T_HT, 4, 60, 60 }, 547 { 0x8d, 13, IEEE80211_T_HT, 4, 60, 60 }, 548 { 0x8e, 14, IEEE80211_T_HT, 4, 60, 60 }, 549 { 0x8f, 15, IEEE80211_T_HT, 4, 60, 60 }, 550 551 /* MCS - 3 streams */ 552 { 0x90, 16, IEEE80211_T_HT, 4, 60, 60 }, 553 { 0x91, 17, IEEE80211_T_HT, 4, 60, 60 }, 554 { 0x92, 18, IEEE80211_T_HT, 4, 60, 60 }, 555 { 0x93, 19, IEEE80211_T_HT, 4, 60, 60 }, 556 { 0x94, 20, IEEE80211_T_HT, 4, 60, 60 }, 557 { 0x95, 21, IEEE80211_T_HT, 4, 60, 60 }, 558 { 0x96, 22, IEEE80211_T_HT, 4, 60, 60 }, 559 { 0x97, 23, IEEE80211_T_HT, 4, 60, 60 }, 560 }; 561 562 /* These are indexes into the above rt2860_rates[] array */ 563 #define RT2860_RIDX_CCK1 0 564 #define RT2860_RIDX_CCK11 3 565 #define RT2860_RIDX_OFDM6 4 566 #define RT2860_RIDX_MCS0 12 567 #define RT2860_RIDX_MAX 36 568 569 static const struct { 570 uint16_t reg; 571 uint32_t val; 572 } rt2870_def_mac[] = { 573 RT2870_DEF_MAC 574 }; 575 576 static const struct { 577 uint8_t reg; 578 uint8_t val; 579 } rt2860_def_bbp[] = { 580 RT2860_DEF_BBP 581 },rt5390_def_bbp[] = { 582 RT5390_DEF_BBP 583 },rt5592_def_bbp[] = { 584 RT5592_DEF_BBP 585 }; 586 587 /* 588 * Default values for BBP register R196 for RT5592. 589 */ 590 static const uint8_t rt5592_bbp_r196[] = { 591 0xe0, 0x1f, 0x38, 0x32, 0x08, 0x28, 0x19, 0x0a, 0xff, 0x00, 592 0x16, 0x10, 0x10, 0x0b, 0x36, 0x2c, 0x26, 0x24, 0x42, 0x36, 593 0x30, 0x2d, 0x4c, 0x46, 0x3d, 0x40, 0x3e, 0x42, 0x3d, 0x40, 594 0x3c, 0x34, 0x2c, 0x2f, 0x3c, 0x35, 0x2e, 0x2a, 0x49, 0x41, 595 0x36, 0x31, 0x30, 0x30, 0x0e, 0x0d, 0x28, 0x21, 0x1c, 0x16, 596 0x50, 0x4a, 0x43, 0x40, 0x10, 0x10, 0x10, 0x10, 0x00, 0x00, 597 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 598 0x00, 0x00, 0x7d, 0x14, 0x32, 0x2c, 0x36, 0x4c, 0x43, 0x2c, 599 0x2e, 0x36, 0x30, 0x6e 600 }; 601 602 static const struct rfprog { 603 uint8_t chan; 604 uint32_t r1, r2, r3, r4; 605 } rt2860_rf2850[] = { 606 RT2860_RF2850 607 }; 608 609 struct { 610 uint8_t n, r, k; 611 } rt3070_freqs[] = { 612 RT3070_RF3052 613 }; 614 615 static const struct rt5592_freqs { 616 uint16_t n; 617 uint8_t k, m, r; 618 } rt5592_freqs_20mhz[] = { 619 RT5592_RF5592_20MHZ 620 },rt5592_freqs_40mhz[] = { 621 RT5592_RF5592_40MHZ 622 }; 623 624 static const struct { 625 uint8_t reg; 626 uint8_t val; 627 } rt3070_def_rf[] = { 628 RT3070_DEF_RF 629 },rt3572_def_rf[] = { 630 RT3572_DEF_RF 631 },rt3593_def_rf[] = { 632 RT3593_DEF_RF 633 },rt5390_def_rf[] = { 634 RT5390_DEF_RF 635 },rt5392_def_rf[] = { 636 RT5392_DEF_RF 637 },rt5592_def_rf[] = { 638 RT5592_DEF_RF 639 },rt5592_2ghz_def_rf[] = { 640 RT5592_2GHZ_DEF_RF 641 },rt5592_5ghz_def_rf[] = { 642 RT5592_5GHZ_DEF_RF 643 }; 644 645 static const struct { 646 u_int firstchan; 647 u_int lastchan; 648 uint8_t reg; 649 uint8_t val; 650 } rt5592_chan_5ghz[] = { 651 RT5592_CHAN_5GHZ 652 }; 653 654 static const struct usb_config run_config[RUN_N_XFER] = { 655 [RUN_BULK_TX_BE] = { 656 .type = UE_BULK, 657 .endpoint = UE_ADDR_ANY, 658 .ep_index = 0, 659 .direction = UE_DIR_OUT, 660 .bufsize = RUN_MAX_TXSZ, 661 .flags = {.pipe_bof = 1,.force_short_xfer = 1,}, 662 .callback = run_bulk_tx_callback0, 663 .timeout = 5000, /* ms */ 664 }, 665 [RUN_BULK_TX_BK] = { 666 .type = UE_BULK, 667 .endpoint = UE_ADDR_ANY, 668 .direction = UE_DIR_OUT, 669 .ep_index = 1, 670 .bufsize = RUN_MAX_TXSZ, 671 .flags = {.pipe_bof = 1,.force_short_xfer = 1,}, 672 .callback = run_bulk_tx_callback1, 673 .timeout = 5000, /* ms */ 674 }, 675 [RUN_BULK_TX_VI] = { 676 .type = UE_BULK, 677 .endpoint = UE_ADDR_ANY, 678 .direction = UE_DIR_OUT, 679 .ep_index = 2, 680 .bufsize = RUN_MAX_TXSZ, 681 .flags = {.pipe_bof = 1,.force_short_xfer = 1,}, 682 .callback = run_bulk_tx_callback2, 683 .timeout = 5000, /* ms */ 684 }, 685 [RUN_BULK_TX_VO] = { 686 .type = UE_BULK, 687 .endpoint = UE_ADDR_ANY, 688 .direction = UE_DIR_OUT, 689 .ep_index = 3, 690 .bufsize = RUN_MAX_TXSZ, 691 .flags = {.pipe_bof = 1,.force_short_xfer = 1,}, 692 .callback = run_bulk_tx_callback3, 693 .timeout = 5000, /* ms */ 694 }, 695 [RUN_BULK_TX_HCCA] = { 696 .type = UE_BULK, 697 .endpoint = UE_ADDR_ANY, 698 .direction = UE_DIR_OUT, 699 .ep_index = 4, 700 .bufsize = RUN_MAX_TXSZ, 701 .flags = {.pipe_bof = 1,.force_short_xfer = 1,.no_pipe_ok = 1,}, 702 .callback = run_bulk_tx_callback4, 703 .timeout = 5000, /* ms */ 704 }, 705 [RUN_BULK_TX_PRIO] = { 706 .type = UE_BULK, 707 .endpoint = UE_ADDR_ANY, 708 .direction = UE_DIR_OUT, 709 .ep_index = 5, 710 .bufsize = RUN_MAX_TXSZ, 711 .flags = {.pipe_bof = 1,.force_short_xfer = 1,.no_pipe_ok = 1,}, 712 .callback = run_bulk_tx_callback5, 713 .timeout = 5000, /* ms */ 714 }, 715 [RUN_BULK_RX] = { 716 .type = UE_BULK, 717 .endpoint = UE_ADDR_ANY, 718 .direction = UE_DIR_IN, 719 .bufsize = RUN_MAX_RXSZ, 720 .flags = {.pipe_bof = 1,.short_xfer_ok = 1,}, 721 .callback = run_bulk_rx_callback, 722 } 723 }; 724 725 static void 726 run_autoinst(void *arg, struct usb_device *udev, 727 struct usb_attach_arg *uaa) 728 { 729 struct usb_interface *iface; 730 struct usb_interface_descriptor *id; 731 732 if (uaa->dev_state != UAA_DEV_READY) 733 return; 734 735 iface = usbd_get_iface(udev, 0); 736 if (iface == NULL) 737 return; 738 id = iface->idesc; 739 if (id == NULL || id->bInterfaceClass != UICLASS_MASS) 740 return; 741 if (usbd_lookup_id_by_uaa(run_devs, sizeof(run_devs), uaa)) 742 return; 743 744 if (usb_msc_eject(udev, 0, MSC_EJECT_STOPUNIT) == 0) 745 uaa->dev_state = UAA_DEV_EJECTING; 746 } 747 748 static int 749 run_driver_loaded(struct module *mod, int what, void *arg) 750 { 751 switch (what) { 752 case MOD_LOAD: 753 run_etag = EVENTHANDLER_REGISTER(usb_dev_configured, 754 run_autoinst, NULL, EVENTHANDLER_PRI_ANY); 755 break; 756 case MOD_UNLOAD: 757 EVENTHANDLER_DEREGISTER(usb_dev_configured, run_etag); 758 break; 759 default: 760 return (EOPNOTSUPP); 761 } 762 return (0); 763 } 764 765 static int 766 run_match(device_t self) 767 { 768 struct usb_attach_arg *uaa = device_get_ivars(self); 769 770 if (uaa->usb_mode != USB_MODE_HOST) 771 return (ENXIO); 772 if (uaa->info.bConfigIndex != 0) 773 return (ENXIO); 774 if (uaa->info.bIfaceIndex != RT2860_IFACE_INDEX) 775 return (ENXIO); 776 777 return (usbd_lookup_id_by_uaa(run_devs, sizeof(run_devs), uaa)); 778 } 779 780 static int 781 run_attach(device_t self) 782 { 783 struct run_softc *sc = device_get_softc(self); 784 struct usb_attach_arg *uaa = device_get_ivars(self); 785 struct ieee80211com *ic = &sc->sc_ic; 786 uint32_t ver; 787 uint8_t iface_index; 788 int ntries, error; 789 790 device_set_usb_desc(self); 791 sc->sc_udev = uaa->device; 792 sc->sc_dev = self; 793 if (USB_GET_DRIVER_INFO(uaa) != RUN_EJECT) 794 sc->sc_flags |= RUN_FLAG_FWLOAD_NEEDED; 795 796 mtx_init(&sc->sc_mtx, device_get_nameunit(sc->sc_dev), 797 MTX_NETWORK_LOCK, MTX_DEF); 798 mbufq_init(&sc->sc_snd, ifqmaxlen); 799 800 iface_index = RT2860_IFACE_INDEX; 801 802 error = usbd_transfer_setup(uaa->device, &iface_index, 803 sc->sc_xfer, run_config, RUN_N_XFER, sc, &sc->sc_mtx); 804 if (error) { 805 device_printf(self, "could not allocate USB transfers, " 806 "err=%s\n", usbd_errstr(error)); 807 goto detach; 808 } 809 810 RUN_LOCK(sc); 811 812 /* wait for the chip to settle */ 813 for (ntries = 0; ntries < 100; ntries++) { 814 if (run_read(sc, RT2860_ASIC_VER_ID, &ver) != 0) { 815 RUN_UNLOCK(sc); 816 goto detach; 817 } 818 if (ver != 0 && ver != 0xffffffff) 819 break; 820 run_delay(sc, 10); 821 } 822 if (ntries == 100) { 823 device_printf(sc->sc_dev, 824 "timeout waiting for NIC to initialize\n"); 825 RUN_UNLOCK(sc); 826 goto detach; 827 } 828 sc->mac_ver = ver >> 16; 829 sc->mac_rev = ver & 0xffff; 830 831 /* retrieve RF rev. no and various other things from EEPROM */ 832 run_read_eeprom(sc); 833 834 device_printf(sc->sc_dev, 835 "MAC/BBP RT%04X (rev 0x%04X), RF %s (MIMO %dT%dR), address %s\n", 836 sc->mac_ver, sc->mac_rev, run_get_rf(sc->rf_rev), 837 sc->ntxchains, sc->nrxchains, ether_sprintf(ic->ic_macaddr)); 838 839 RUN_UNLOCK(sc); 840 841 ic->ic_softc = sc; 842 ic->ic_name = device_get_nameunit(self); 843 ic->ic_phytype = IEEE80211_T_OFDM; /* not only, but not used */ 844 ic->ic_opmode = IEEE80211_M_STA; /* default to BSS mode */ 845 846 /* set device capabilities */ 847 ic->ic_caps = 848 IEEE80211_C_STA | /* station mode supported */ 849 IEEE80211_C_MONITOR | /* monitor mode supported */ 850 IEEE80211_C_IBSS | 851 IEEE80211_C_HOSTAP | 852 IEEE80211_C_WDS | /* 4-address traffic works */ 853 IEEE80211_C_MBSS | 854 IEEE80211_C_SHPREAMBLE | /* short preamble supported */ 855 IEEE80211_C_SHSLOT | /* short slot time supported */ 856 IEEE80211_C_SWAMSDUTX | /* Do software A-MSDU TX */ 857 IEEE80211_C_FF | /* Atheros fast-frames */ 858 IEEE80211_C_WME | /* WME */ 859 IEEE80211_C_WPA; /* WPA1|WPA2(RSN) */ 860 861 /* 862 * RF2020 is not an 11n device. 863 */ 864 if (sc->rf_rev != RT3070_RF_2020) { 865 device_printf(sc->sc_dev, "[HT] Enabling 802.11n\n"); 866 ic->ic_htcaps = 867 IEEE80211_HTC_HT | 868 IEEE80211_HTC_AMPDU | 869 IEEE80211_HTC_AMSDU | 870 IEEE80211_HTCAP_MAXAMSDU_3839 | 871 IEEE80211_HTCAP_SMPS_OFF; 872 873 ic->ic_rxstream = sc->nrxchains; 874 ic->ic_txstream = sc->ntxchains; 875 } 876 877 ic->ic_cryptocaps = 878 IEEE80211_CRYPTO_WEP | 879 IEEE80211_CRYPTO_AES_CCM | 880 IEEE80211_CRYPTO_TKIPMIC | 881 IEEE80211_CRYPTO_TKIP; 882 883 ic->ic_flags |= IEEE80211_F_DATAPAD; 884 ic->ic_flags_ext |= IEEE80211_FEXT_SWBMISS; 885 886 run_getradiocaps(ic, IEEE80211_CHAN_MAX, &ic->ic_nchans, 887 ic->ic_channels); 888 889 ieee80211_ifattach(ic); 890 891 ic->ic_scan_start = run_scan_start; 892 ic->ic_scan_end = run_scan_end; 893 ic->ic_set_channel = run_set_channel; 894 ic->ic_getradiocaps = run_getradiocaps; 895 ic->ic_node_alloc = run_node_alloc; 896 ic->ic_newassoc = run_newassoc; 897 ic->ic_updateslot = run_updateslot; 898 ic->ic_update_mcast = run_update_mcast; 899 ic->ic_wme.wme_update = run_wme_update; 900 ic->ic_raw_xmit = run_raw_xmit; 901 ic->ic_update_promisc = run_update_promisc; 902 ic->ic_vap_create = run_vap_create; 903 ic->ic_vap_delete = run_vap_delete; 904 ic->ic_transmit = run_transmit; 905 ic->ic_parent = run_parent; 906 ic->ic_update_chw = run_update_chw; 907 ic->ic_ampdu_enable = run_ampdu_enable; 908 909 ieee80211_radiotap_attach(ic, 910 &sc->sc_txtap.wt_ihdr, sizeof(sc->sc_txtap), 911 RUN_TX_RADIOTAP_PRESENT, 912 &sc->sc_rxtap.wr_ihdr, sizeof(sc->sc_rxtap), 913 RUN_RX_RADIOTAP_PRESENT); 914 915 TASK_INIT(&sc->cmdq_task, 0, run_cmdq_cb, sc); 916 TASK_INIT(&sc->ratectl_task, 0, run_ratectl_cb, sc); 917 usb_callout_init_mtx(&sc->ratectl_ch, &sc->sc_mtx, 0); 918 919 if (bootverbose) 920 ieee80211_announce(ic); 921 922 return (0); 923 924 detach: 925 run_detach(self); 926 return (ENXIO); 927 } 928 929 static void 930 run_drain_mbufq(struct run_softc *sc) 931 { 932 struct mbuf *m; 933 struct ieee80211_node *ni; 934 935 RUN_LOCK_ASSERT(sc, MA_OWNED); 936 while ((m = mbufq_dequeue(&sc->sc_snd)) != NULL) { 937 ni = (struct ieee80211_node *)m->m_pkthdr.rcvif; 938 m->m_pkthdr.rcvif = NULL; 939 ieee80211_free_node(ni); 940 m_freem(m); 941 } 942 } 943 944 static int 945 run_detach(device_t self) 946 { 947 struct run_softc *sc = device_get_softc(self); 948 struct ieee80211com *ic = &sc->sc_ic; 949 int i; 950 951 RUN_LOCK(sc); 952 sc->sc_detached = 1; 953 RUN_UNLOCK(sc); 954 955 /* stop all USB transfers */ 956 usbd_transfer_unsetup(sc->sc_xfer, RUN_N_XFER); 957 958 RUN_LOCK(sc); 959 sc->ratectl_run = RUN_RATECTL_OFF; 960 sc->cmdq_run = sc->cmdq_key_set = RUN_CMDQ_ABORT; 961 962 /* free TX list, if any */ 963 for (i = 0; i != RUN_EP_QUEUES; i++) 964 run_unsetup_tx_list(sc, &sc->sc_epq[i]); 965 966 /* Free TX queue */ 967 run_drain_mbufq(sc); 968 RUN_UNLOCK(sc); 969 970 if (sc->sc_ic.ic_softc == sc) { 971 /* drain tasks */ 972 usb_callout_drain(&sc->ratectl_ch); 973 ieee80211_draintask(ic, &sc->cmdq_task); 974 ieee80211_draintask(ic, &sc->ratectl_task); 975 ieee80211_ifdetach(ic); 976 } 977 978 mtx_destroy(&sc->sc_mtx); 979 980 return (0); 981 } 982 983 static struct ieee80211vap * 984 run_vap_create(struct ieee80211com *ic, const char name[IFNAMSIZ], int unit, 985 enum ieee80211_opmode opmode, int flags, 986 const uint8_t bssid[IEEE80211_ADDR_LEN], 987 const uint8_t mac[IEEE80211_ADDR_LEN]) 988 { 989 struct run_softc *sc = ic->ic_softc; 990 struct run_vap *rvp; 991 struct ieee80211vap *vap; 992 int i; 993 994 if (sc->rvp_cnt >= RUN_VAP_MAX) { 995 device_printf(sc->sc_dev, "number of VAPs maxed out\n"); 996 return (NULL); 997 } 998 999 switch (opmode) { 1000 case IEEE80211_M_STA: 1001 /* enable s/w bmiss handling for sta mode */ 1002 flags |= IEEE80211_CLONE_NOBEACONS; 1003 /* fall though */ 1004 case IEEE80211_M_IBSS: 1005 case IEEE80211_M_MONITOR: 1006 case IEEE80211_M_HOSTAP: 1007 case IEEE80211_M_MBSS: 1008 /* other than WDS vaps, only one at a time */ 1009 if (!TAILQ_EMPTY(&ic->ic_vaps)) 1010 return (NULL); 1011 break; 1012 case IEEE80211_M_WDS: 1013 TAILQ_FOREACH(vap, &ic->ic_vaps, iv_next){ 1014 if(vap->iv_opmode != IEEE80211_M_HOSTAP) 1015 continue; 1016 /* WDS vap's always share the local mac address. */ 1017 flags &= ~IEEE80211_CLONE_BSSID; 1018 break; 1019 } 1020 if (vap == NULL) { 1021 device_printf(sc->sc_dev, 1022 "wds only supported in ap mode\n"); 1023 return (NULL); 1024 } 1025 break; 1026 default: 1027 device_printf(sc->sc_dev, "unknown opmode %d\n", opmode); 1028 return (NULL); 1029 } 1030 1031 rvp = malloc(sizeof(struct run_vap), M_80211_VAP, M_WAITOK | M_ZERO); 1032 vap = &rvp->vap; 1033 1034 if (ieee80211_vap_setup(ic, vap, name, unit, opmode, flags, 1035 bssid) != 0) { 1036 /* out of memory */ 1037 free(rvp, M_80211_VAP); 1038 return (NULL); 1039 } 1040 1041 vap->iv_update_beacon = run_update_beacon; 1042 vap->iv_max_aid = RT2870_WCID_MAX; 1043 1044 /* 1045 * The linux rt2800 driver limits 1 stream devices to a 32KB 1046 * RX AMPDU. 1047 */ 1048 if (ic->ic_rxstream > 1) 1049 vap->iv_ampdu_rxmax = IEEE80211_HTCAP_MAXRXAMPDU_64K; 1050 else 1051 vap->iv_ampdu_rxmax = IEEE80211_HTCAP_MAXRXAMPDU_32K; 1052 vap->iv_ampdu_density = IEEE80211_HTCAP_MPDUDENSITY_2; /* 2uS */ 1053 1054 /* 1055 * To delete the right key from h/w, we need wcid. 1056 * Luckily, there is unused space in ieee80211_key{}, wk_pad, 1057 * and matching wcid will be written into there. So, cast 1058 * some spells to remove 'const' from ieee80211_key{} 1059 */ 1060 vap->iv_key_delete = (void *)run_key_delete; 1061 vap->iv_key_set = (void *)run_key_set; 1062 1063 /* override state transition machine */ 1064 rvp->newstate = vap->iv_newstate; 1065 vap->iv_newstate = run_newstate; 1066 if (opmode == IEEE80211_M_IBSS) { 1067 rvp->recv_mgmt = vap->iv_recv_mgmt; 1068 vap->iv_recv_mgmt = run_recv_mgmt; 1069 } 1070 1071 ieee80211_ratectl_init(vap); 1072 ieee80211_ratectl_setinterval(vap, 1000 /* 1 sec */); 1073 1074 /* complete setup */ 1075 ieee80211_vap_attach(vap, run_media_change, ieee80211_media_status, 1076 mac); 1077 1078 /* make sure id is always unique */ 1079 for (i = 0; i < RUN_VAP_MAX; i++) { 1080 if((sc->rvp_bmap & 1 << i) == 0){ 1081 sc->rvp_bmap |= 1 << i; 1082 rvp->rvp_id = i; 1083 break; 1084 } 1085 } 1086 if (sc->rvp_cnt++ == 0) 1087 ic->ic_opmode = opmode; 1088 1089 if (opmode == IEEE80211_M_HOSTAP) 1090 sc->cmdq_run = RUN_CMDQ_GO; 1091 1092 RUN_DPRINTF(sc, RUN_DEBUG_STATE, "rvp_id=%d bmap=%x rvp_cnt=%d\n", 1093 rvp->rvp_id, sc->rvp_bmap, sc->rvp_cnt); 1094 1095 return (vap); 1096 } 1097 1098 static void 1099 run_vap_delete(struct ieee80211vap *vap) 1100 { 1101 struct run_vap *rvp = RUN_VAP(vap); 1102 struct ieee80211com *ic; 1103 struct run_softc *sc; 1104 uint8_t rvp_id; 1105 1106 if (vap == NULL) 1107 return; 1108 1109 ic = vap->iv_ic; 1110 sc = ic->ic_softc; 1111 1112 RUN_LOCK(sc); 1113 1114 m_freem(rvp->beacon_mbuf); 1115 rvp->beacon_mbuf = NULL; 1116 1117 rvp_id = rvp->rvp_id; 1118 sc->ratectl_run &= ~(1 << rvp_id); 1119 sc->rvp_bmap &= ~(1 << rvp_id); 1120 run_set_region_4(sc, RT2860_SKEY(rvp_id, 0), 0, 128); 1121 run_set_region_4(sc, RT2860_BCN_BASE(rvp_id), 0, 512); 1122 --sc->rvp_cnt; 1123 1124 RUN_DPRINTF(sc, RUN_DEBUG_STATE, 1125 "vap=%p rvp_id=%d bmap=%x rvp_cnt=%d\n", 1126 vap, rvp_id, sc->rvp_bmap, sc->rvp_cnt); 1127 1128 RUN_UNLOCK(sc); 1129 1130 ieee80211_ratectl_deinit(vap); 1131 ieee80211_vap_detach(vap); 1132 free(rvp, M_80211_VAP); 1133 } 1134 1135 /* 1136 * There are numbers of functions need to be called in context thread. 1137 * Rather than creating taskqueue event for each of those functions, 1138 * here is all-for-one taskqueue callback function. This function 1139 * guarantees deferred functions are executed in the same order they 1140 * were enqueued. 1141 * '& RUN_CMDQ_MASQ' is to loop cmdq[]. 1142 */ 1143 static void 1144 run_cmdq_cb(void *arg, int pending) 1145 { 1146 struct run_softc *sc = arg; 1147 uint8_t i; 1148 1149 /* call cmdq[].func locked */ 1150 RUN_LOCK(sc); 1151 for (i = sc->cmdq_exec; sc->cmdq[i].func && pending; 1152 i = sc->cmdq_exec, pending--) { 1153 RUN_DPRINTF(sc, RUN_DEBUG_CMD, "cmdq_exec=%d pending=%d\n", 1154 i, pending); 1155 if (sc->cmdq_run == RUN_CMDQ_GO) { 1156 /* 1157 * If arg0 is NULL, callback func needs more 1158 * than one arg. So, pass ptr to cmdq struct. 1159 */ 1160 if (sc->cmdq[i].arg0) 1161 sc->cmdq[i].func(sc->cmdq[i].arg0); 1162 else 1163 sc->cmdq[i].func(&sc->cmdq[i]); 1164 } 1165 sc->cmdq[i].arg0 = NULL; 1166 sc->cmdq[i].func = NULL; 1167 sc->cmdq_exec++; 1168 sc->cmdq_exec &= RUN_CMDQ_MASQ; 1169 } 1170 RUN_UNLOCK(sc); 1171 } 1172 1173 static void 1174 run_setup_tx_list(struct run_softc *sc, struct run_endpoint_queue *pq) 1175 { 1176 struct run_tx_data *data; 1177 1178 memset(pq, 0, sizeof(*pq)); 1179 1180 STAILQ_INIT(&pq->tx_qh); 1181 STAILQ_INIT(&pq->tx_fh); 1182 1183 for (data = &pq->tx_data[0]; 1184 data < &pq->tx_data[RUN_TX_RING_COUNT]; data++) { 1185 data->sc = sc; 1186 STAILQ_INSERT_TAIL(&pq->tx_fh, data, next); 1187 } 1188 pq->tx_nfree = RUN_TX_RING_COUNT; 1189 } 1190 1191 static void 1192 run_unsetup_tx_list(struct run_softc *sc, struct run_endpoint_queue *pq) 1193 { 1194 struct run_tx_data *data; 1195 1196 /* make sure any subsequent use of the queues will fail */ 1197 pq->tx_nfree = 0; 1198 STAILQ_INIT(&pq->tx_fh); 1199 STAILQ_INIT(&pq->tx_qh); 1200 1201 /* free up all node references and mbufs */ 1202 for (data = &pq->tx_data[0]; 1203 data < &pq->tx_data[RUN_TX_RING_COUNT]; data++) { 1204 if (data->m != NULL) { 1205 m_freem(data->m); 1206 data->m = NULL; 1207 } 1208 if (data->ni != NULL) { 1209 ieee80211_free_node(data->ni); 1210 data->ni = NULL; 1211 } 1212 } 1213 } 1214 1215 static int 1216 run_load_microcode(struct run_softc *sc) 1217 { 1218 usb_device_request_t req; 1219 const struct firmware *fw; 1220 const u_char *base; 1221 uint32_t tmp; 1222 int ntries, error; 1223 const uint64_t *temp; 1224 uint64_t bytes; 1225 1226 RUN_UNLOCK(sc); 1227 fw = firmware_get("runfw"); 1228 RUN_LOCK(sc); 1229 if (fw == NULL) { 1230 device_printf(sc->sc_dev, 1231 "failed loadfirmware of file %s\n", "runfw"); 1232 return ENOENT; 1233 } 1234 1235 if (fw->datasize != 8192) { 1236 device_printf(sc->sc_dev, 1237 "invalid firmware size (should be 8KB)\n"); 1238 error = EINVAL; 1239 goto fail; 1240 } 1241 1242 /* 1243 * RT3071/RT3072 use a different firmware 1244 * run-rt2870 (8KB) contains both, 1245 * first half (4KB) is for rt2870, 1246 * last half is for rt3071. 1247 */ 1248 base = fw->data; 1249 if ((sc->mac_ver) != 0x2860 && 1250 (sc->mac_ver) != 0x2872 && 1251 (sc->mac_ver) != 0x3070) { 1252 base += 4096; 1253 } 1254 1255 /* cheap sanity check */ 1256 temp = fw->data; 1257 bytes = *temp; 1258 if (bytes != be64toh(0xffffff0210280210ULL)) { 1259 device_printf(sc->sc_dev, "firmware checksum failed\n"); 1260 error = EINVAL; 1261 goto fail; 1262 } 1263 1264 /* write microcode image */ 1265 if (sc->sc_flags & RUN_FLAG_FWLOAD_NEEDED) { 1266 run_write_region_1(sc, RT2870_FW_BASE, base, 4096); 1267 run_write(sc, RT2860_H2M_MAILBOX_CID, 0xffffffff); 1268 run_write(sc, RT2860_H2M_MAILBOX_STATUS, 0xffffffff); 1269 } 1270 1271 req.bmRequestType = UT_WRITE_VENDOR_DEVICE; 1272 req.bRequest = RT2870_RESET; 1273 USETW(req.wValue, 8); 1274 USETW(req.wIndex, 0); 1275 USETW(req.wLength, 0); 1276 if ((error = usbd_do_request(sc->sc_udev, &sc->sc_mtx, &req, NULL)) 1277 != 0) { 1278 device_printf(sc->sc_dev, "firmware reset failed\n"); 1279 goto fail; 1280 } 1281 1282 run_delay(sc, 10); 1283 1284 run_write(sc, RT2860_H2M_BBPAGENT, 0); 1285 run_write(sc, RT2860_H2M_MAILBOX, 0); 1286 run_write(sc, RT2860_H2M_INTSRC, 0); 1287 if ((error = run_mcu_cmd(sc, RT2860_MCU_CMD_RFRESET, 0)) != 0) 1288 goto fail; 1289 1290 /* wait until microcontroller is ready */ 1291 for (ntries = 0; ntries < 1000; ntries++) { 1292 if ((error = run_read(sc, RT2860_SYS_CTRL, &tmp)) != 0) 1293 goto fail; 1294 if (tmp & RT2860_MCU_READY) 1295 break; 1296 run_delay(sc, 10); 1297 } 1298 if (ntries == 1000) { 1299 device_printf(sc->sc_dev, 1300 "timeout waiting for MCU to initialize\n"); 1301 error = ETIMEDOUT; 1302 goto fail; 1303 } 1304 device_printf(sc->sc_dev, "firmware %s ver. %u.%u loaded\n", 1305 (base == fw->data) ? "RT2870" : "RT3071", 1306 *(base + 4092), *(base + 4093)); 1307 1308 fail: 1309 firmware_put(fw, FIRMWARE_UNLOAD); 1310 return (error); 1311 } 1312 1313 static int 1314 run_reset(struct run_softc *sc) 1315 { 1316 usb_device_request_t req; 1317 1318 req.bmRequestType = UT_WRITE_VENDOR_DEVICE; 1319 req.bRequest = RT2870_RESET; 1320 USETW(req.wValue, 1); 1321 USETW(req.wIndex, 0); 1322 USETW(req.wLength, 0); 1323 return (usbd_do_request(sc->sc_udev, &sc->sc_mtx, &req, NULL)); 1324 } 1325 1326 static usb_error_t 1327 run_do_request(struct run_softc *sc, 1328 struct usb_device_request *req, void *data) 1329 { 1330 usb_error_t err; 1331 int ntries = 10; 1332 1333 RUN_LOCK_ASSERT(sc, MA_OWNED); 1334 1335 while (ntries--) { 1336 err = usbd_do_request_flags(sc->sc_udev, &sc->sc_mtx, 1337 req, data, 0, NULL, 250 /* ms */); 1338 if (err == 0) 1339 break; 1340 RUN_DPRINTF(sc, RUN_DEBUG_USB, 1341 "Control request failed, %s (retrying)\n", 1342 usbd_errstr(err)); 1343 run_delay(sc, 10); 1344 } 1345 return (err); 1346 } 1347 1348 static int 1349 run_read(struct run_softc *sc, uint16_t reg, uint32_t *val) 1350 { 1351 uint32_t tmp; 1352 int error; 1353 1354 error = run_read_region_1(sc, reg, (uint8_t *)&tmp, sizeof tmp); 1355 if (error == 0) 1356 *val = le32toh(tmp); 1357 else 1358 *val = 0xffffffff; 1359 return (error); 1360 } 1361 1362 static int 1363 run_read_region_1(struct run_softc *sc, uint16_t reg, uint8_t *buf, int len) 1364 { 1365 usb_device_request_t req; 1366 1367 req.bmRequestType = UT_READ_VENDOR_DEVICE; 1368 req.bRequest = RT2870_READ_REGION_1; 1369 USETW(req.wValue, 0); 1370 USETW(req.wIndex, reg); 1371 USETW(req.wLength, len); 1372 1373 return (run_do_request(sc, &req, buf)); 1374 } 1375 1376 static int 1377 run_write_2(struct run_softc *sc, uint16_t reg, uint16_t val) 1378 { 1379 usb_device_request_t req; 1380 1381 req.bmRequestType = UT_WRITE_VENDOR_DEVICE; 1382 req.bRequest = RT2870_WRITE_2; 1383 USETW(req.wValue, val); 1384 USETW(req.wIndex, reg); 1385 USETW(req.wLength, 0); 1386 1387 return (run_do_request(sc, &req, NULL)); 1388 } 1389 1390 static int 1391 run_write(struct run_softc *sc, uint16_t reg, uint32_t val) 1392 { 1393 int error; 1394 1395 if ((error = run_write_2(sc, reg, val & 0xffff)) == 0) 1396 error = run_write_2(sc, reg + 2, val >> 16); 1397 return (error); 1398 } 1399 1400 static int 1401 run_write_region_1(struct run_softc *sc, uint16_t reg, const uint8_t *buf, 1402 int len) 1403 { 1404 #if 1 1405 int i, error = 0; 1406 /* 1407 * NB: the WRITE_REGION_1 command is not stable on RT2860. 1408 * We thus issue multiple WRITE_2 commands instead. 1409 */ 1410 KASSERT((len & 1) == 0, ("run_write_region_1: Data too long.\n")); 1411 for (i = 0; i < len && error == 0; i += 2) 1412 error = run_write_2(sc, reg + i, buf[i] | buf[i + 1] << 8); 1413 return (error); 1414 #else 1415 usb_device_request_t req; 1416 int error = 0; 1417 1418 /* 1419 * NOTE: It appears the WRITE_REGION_1 command cannot be 1420 * passed a huge amount of data, which will crash the 1421 * firmware. Limit amount of data passed to 64-bytes at a 1422 * time. 1423 */ 1424 while (len > 0) { 1425 int delta = 64; 1426 if (delta > len) 1427 delta = len; 1428 1429 req.bmRequestType = UT_WRITE_VENDOR_DEVICE; 1430 req.bRequest = RT2870_WRITE_REGION_1; 1431 USETW(req.wValue, 0); 1432 USETW(req.wIndex, reg); 1433 USETW(req.wLength, delta); 1434 error = run_do_request(sc, &req, __DECONST(uint8_t *, buf)); 1435 if (error != 0) 1436 break; 1437 reg += delta; 1438 buf += delta; 1439 len -= delta; 1440 } 1441 return (error); 1442 #endif 1443 } 1444 1445 static int 1446 run_set_region_4(struct run_softc *sc, uint16_t reg, uint32_t val, int len) 1447 { 1448 int i, error = 0; 1449 1450 KASSERT((len & 3) == 0, ("run_set_region_4: Invalid data length.\n")); 1451 for (i = 0; i < len && error == 0; i += 4) 1452 error = run_write(sc, reg + i, val); 1453 return (error); 1454 } 1455 1456 static int 1457 run_efuse_read(struct run_softc *sc, uint16_t addr, uint16_t *val, int count) 1458 { 1459 uint32_t tmp; 1460 uint16_t reg; 1461 int error, ntries; 1462 1463 if ((error = run_read(sc, RT3070_EFUSE_CTRL, &tmp)) != 0) 1464 return (error); 1465 1466 if (count == 2) 1467 addr *= 2; 1468 /*- 1469 * Read one 16-byte block into registers EFUSE_DATA[0-3]: 1470 * DATA0: F E D C 1471 * DATA1: B A 9 8 1472 * DATA2: 7 6 5 4 1473 * DATA3: 3 2 1 0 1474 */ 1475 tmp &= ~(RT3070_EFSROM_MODE_MASK | RT3070_EFSROM_AIN_MASK); 1476 tmp |= (addr & ~0xf) << RT3070_EFSROM_AIN_SHIFT | RT3070_EFSROM_KICK; 1477 run_write(sc, RT3070_EFUSE_CTRL, tmp); 1478 for (ntries = 0; ntries < 100; ntries++) { 1479 if ((error = run_read(sc, RT3070_EFUSE_CTRL, &tmp)) != 0) 1480 return (error); 1481 if (!(tmp & RT3070_EFSROM_KICK)) 1482 break; 1483 run_delay(sc, 2); 1484 } 1485 if (ntries == 100) 1486 return (ETIMEDOUT); 1487 1488 if ((tmp & RT3070_EFUSE_AOUT_MASK) == RT3070_EFUSE_AOUT_MASK) { 1489 *val = 0xffff; /* address not found */ 1490 return (0); 1491 } 1492 /* determine to which 32-bit register our 16-bit word belongs */ 1493 reg = RT3070_EFUSE_DATA3 - (addr & 0xc); 1494 if ((error = run_read(sc, reg, &tmp)) != 0) 1495 return (error); 1496 1497 tmp >>= (8 * (addr & 0x3)); 1498 *val = (addr & 1) ? tmp >> 16 : tmp & 0xffff; 1499 1500 return (0); 1501 } 1502 1503 /* Read 16-bit from eFUSE ROM for RT3xxx. */ 1504 static int 1505 run_efuse_read_2(struct run_softc *sc, uint16_t addr, uint16_t *val) 1506 { 1507 return (run_efuse_read(sc, addr, val, 2)); 1508 } 1509 1510 static int 1511 run_eeprom_read_2(struct run_softc *sc, uint16_t addr, uint16_t *val) 1512 { 1513 usb_device_request_t req; 1514 uint16_t tmp; 1515 int error; 1516 1517 addr *= 2; 1518 req.bmRequestType = UT_READ_VENDOR_DEVICE; 1519 req.bRequest = RT2870_EEPROM_READ; 1520 USETW(req.wValue, 0); 1521 USETW(req.wIndex, addr); 1522 USETW(req.wLength, sizeof(tmp)); 1523 1524 error = usbd_do_request(sc->sc_udev, &sc->sc_mtx, &req, &tmp); 1525 if (error == 0) 1526 *val = le16toh(tmp); 1527 else 1528 *val = 0xffff; 1529 return (error); 1530 } 1531 1532 static __inline int 1533 run_srom_read(struct run_softc *sc, uint16_t addr, uint16_t *val) 1534 { 1535 /* either eFUSE ROM or EEPROM */ 1536 return sc->sc_srom_read(sc, addr, val); 1537 } 1538 1539 static int 1540 run_rt2870_rf_write(struct run_softc *sc, uint32_t val) 1541 { 1542 uint32_t tmp; 1543 int error, ntries; 1544 1545 for (ntries = 0; ntries < 10; ntries++) { 1546 if ((error = run_read(sc, RT2860_RF_CSR_CFG0, &tmp)) != 0) 1547 return (error); 1548 if (!(tmp & RT2860_RF_REG_CTRL)) 1549 break; 1550 } 1551 if (ntries == 10) 1552 return (ETIMEDOUT); 1553 1554 return (run_write(sc, RT2860_RF_CSR_CFG0, val)); 1555 } 1556 1557 static int 1558 run_rt3070_rf_read(struct run_softc *sc, uint8_t reg, uint8_t *val) 1559 { 1560 uint32_t tmp; 1561 int error, ntries; 1562 1563 for (ntries = 0; ntries < 100; ntries++) { 1564 if ((error = run_read(sc, RT3070_RF_CSR_CFG, &tmp)) != 0) 1565 return (error); 1566 if (!(tmp & RT3070_RF_KICK)) 1567 break; 1568 } 1569 if (ntries == 100) 1570 return (ETIMEDOUT); 1571 1572 tmp = RT3070_RF_KICK | reg << 8; 1573 if ((error = run_write(sc, RT3070_RF_CSR_CFG, tmp)) != 0) 1574 return (error); 1575 1576 for (ntries = 0; ntries < 100; ntries++) { 1577 if ((error = run_read(sc, RT3070_RF_CSR_CFG, &tmp)) != 0) 1578 return (error); 1579 if (!(tmp & RT3070_RF_KICK)) 1580 break; 1581 } 1582 if (ntries == 100) 1583 return (ETIMEDOUT); 1584 1585 *val = tmp & 0xff; 1586 return (0); 1587 } 1588 1589 static int 1590 run_rt3070_rf_write(struct run_softc *sc, uint8_t reg, uint8_t val) 1591 { 1592 uint32_t tmp; 1593 int error, ntries; 1594 1595 for (ntries = 0; ntries < 10; ntries++) { 1596 if ((error = run_read(sc, RT3070_RF_CSR_CFG, &tmp)) != 0) 1597 return (error); 1598 if (!(tmp & RT3070_RF_KICK)) 1599 break; 1600 } 1601 if (ntries == 10) 1602 return (ETIMEDOUT); 1603 1604 tmp = RT3070_RF_WRITE | RT3070_RF_KICK | reg << 8 | val; 1605 return (run_write(sc, RT3070_RF_CSR_CFG, tmp)); 1606 } 1607 1608 static int 1609 run_bbp_read(struct run_softc *sc, uint8_t reg, uint8_t *val) 1610 { 1611 uint32_t tmp; 1612 int ntries, error; 1613 1614 for (ntries = 0; ntries < 10; ntries++) { 1615 if ((error = run_read(sc, RT2860_BBP_CSR_CFG, &tmp)) != 0) 1616 return (error); 1617 if (!(tmp & RT2860_BBP_CSR_KICK)) 1618 break; 1619 } 1620 if (ntries == 10) 1621 return (ETIMEDOUT); 1622 1623 tmp = RT2860_BBP_CSR_READ | RT2860_BBP_CSR_KICK | reg << 8; 1624 if ((error = run_write(sc, RT2860_BBP_CSR_CFG, tmp)) != 0) 1625 return (error); 1626 1627 for (ntries = 0; ntries < 10; ntries++) { 1628 if ((error = run_read(sc, RT2860_BBP_CSR_CFG, &tmp)) != 0) 1629 return (error); 1630 if (!(tmp & RT2860_BBP_CSR_KICK)) 1631 break; 1632 } 1633 if (ntries == 10) 1634 return (ETIMEDOUT); 1635 1636 *val = tmp & 0xff; 1637 return (0); 1638 } 1639 1640 static int 1641 run_bbp_write(struct run_softc *sc, uint8_t reg, uint8_t val) 1642 { 1643 uint32_t tmp; 1644 int ntries, error; 1645 1646 for (ntries = 0; ntries < 10; ntries++) { 1647 if ((error = run_read(sc, RT2860_BBP_CSR_CFG, &tmp)) != 0) 1648 return (error); 1649 if (!(tmp & RT2860_BBP_CSR_KICK)) 1650 break; 1651 } 1652 if (ntries == 10) 1653 return (ETIMEDOUT); 1654 1655 tmp = RT2860_BBP_CSR_KICK | reg << 8 | val; 1656 return (run_write(sc, RT2860_BBP_CSR_CFG, tmp)); 1657 } 1658 1659 /* 1660 * Send a command to the 8051 microcontroller unit. 1661 */ 1662 static int 1663 run_mcu_cmd(struct run_softc *sc, uint8_t cmd, uint16_t arg) 1664 { 1665 uint32_t tmp; 1666 int error, ntries; 1667 1668 for (ntries = 0; ntries < 100; ntries++) { 1669 if ((error = run_read(sc, RT2860_H2M_MAILBOX, &tmp)) != 0) 1670 return error; 1671 if (!(tmp & RT2860_H2M_BUSY)) 1672 break; 1673 } 1674 if (ntries == 100) 1675 return ETIMEDOUT; 1676 1677 tmp = RT2860_H2M_BUSY | RT2860_TOKEN_NO_INTR << 16 | arg; 1678 if ((error = run_write(sc, RT2860_H2M_MAILBOX, tmp)) == 0) 1679 error = run_write(sc, RT2860_HOST_CMD, cmd); 1680 return (error); 1681 } 1682 1683 /* 1684 * Add `delta' (signed) to each 4-bit sub-word of a 32-bit word. 1685 * Used to adjust per-rate Tx power registers. 1686 */ 1687 static __inline uint32_t 1688 b4inc(uint32_t b32, int8_t delta) 1689 { 1690 int8_t i, b4; 1691 1692 for (i = 0; i < 8; i++) { 1693 b4 = b32 & 0xf; 1694 b4 += delta; 1695 if (b4 < 0) 1696 b4 = 0; 1697 else if (b4 > 0xf) 1698 b4 = 0xf; 1699 b32 = b32 >> 4 | b4 << 28; 1700 } 1701 return (b32); 1702 } 1703 1704 static const char * 1705 run_get_rf(uint16_t rev) 1706 { 1707 switch (rev) { 1708 case RT2860_RF_2820: return "RT2820"; 1709 case RT2860_RF_2850: return "RT2850"; 1710 case RT2860_RF_2720: return "RT2720"; 1711 case RT2860_RF_2750: return "RT2750"; 1712 case RT3070_RF_3020: return "RT3020"; 1713 case RT3070_RF_2020: return "RT2020"; 1714 case RT3070_RF_3021: return "RT3021"; 1715 case RT3070_RF_3022: return "RT3022"; 1716 case RT3070_RF_3052: return "RT3052"; 1717 case RT3593_RF_3053: return "RT3053"; 1718 case RT5592_RF_5592: return "RT5592"; 1719 case RT5390_RF_5370: return "RT5370"; 1720 case RT5390_RF_5372: return "RT5372"; 1721 } 1722 return ("unknown"); 1723 } 1724 1725 static void 1726 run_rt3593_get_txpower(struct run_softc *sc) 1727 { 1728 uint16_t addr, val; 1729 int i; 1730 1731 /* Read power settings for 2GHz channels. */ 1732 for (i = 0; i < 14; i += 2) { 1733 addr = (sc->ntxchains == 3) ? RT3593_EEPROM_PWR2GHZ_BASE1 : 1734 RT2860_EEPROM_PWR2GHZ_BASE1; 1735 run_srom_read(sc, addr + i / 2, &val); 1736 sc->txpow1[i + 0] = (int8_t)(val & 0xff); 1737 sc->txpow1[i + 1] = (int8_t)(val >> 8); 1738 1739 addr = (sc->ntxchains == 3) ? RT3593_EEPROM_PWR2GHZ_BASE2 : 1740 RT2860_EEPROM_PWR2GHZ_BASE2; 1741 run_srom_read(sc, addr + i / 2, &val); 1742 sc->txpow2[i + 0] = (int8_t)(val & 0xff); 1743 sc->txpow2[i + 1] = (int8_t)(val >> 8); 1744 1745 if (sc->ntxchains == 3) { 1746 run_srom_read(sc, RT3593_EEPROM_PWR2GHZ_BASE3 + i / 2, 1747 &val); 1748 sc->txpow3[i + 0] = (int8_t)(val & 0xff); 1749 sc->txpow3[i + 1] = (int8_t)(val >> 8); 1750 } 1751 } 1752 /* Fix broken Tx power entries. */ 1753 for (i = 0; i < 14; i++) { 1754 if (sc->txpow1[i] > 31) 1755 sc->txpow1[i] = 5; 1756 if (sc->txpow2[i] > 31) 1757 sc->txpow2[i] = 5; 1758 if (sc->ntxchains == 3) { 1759 if (sc->txpow3[i] > 31) 1760 sc->txpow3[i] = 5; 1761 } 1762 } 1763 /* Read power settings for 5GHz channels. */ 1764 for (i = 0; i < 40; i += 2) { 1765 run_srom_read(sc, RT3593_EEPROM_PWR5GHZ_BASE1 + i / 2, &val); 1766 sc->txpow1[i + 14] = (int8_t)(val & 0xff); 1767 sc->txpow1[i + 15] = (int8_t)(val >> 8); 1768 1769 run_srom_read(sc, RT3593_EEPROM_PWR5GHZ_BASE2 + i / 2, &val); 1770 sc->txpow2[i + 14] = (int8_t)(val & 0xff); 1771 sc->txpow2[i + 15] = (int8_t)(val >> 8); 1772 1773 if (sc->ntxchains == 3) { 1774 run_srom_read(sc, RT3593_EEPROM_PWR5GHZ_BASE3 + i / 2, 1775 &val); 1776 sc->txpow3[i + 14] = (int8_t)(val & 0xff); 1777 sc->txpow3[i + 15] = (int8_t)(val >> 8); 1778 } 1779 } 1780 } 1781 1782 static void 1783 run_get_txpower(struct run_softc *sc) 1784 { 1785 uint16_t val; 1786 int i; 1787 1788 /* Read power settings for 2GHz channels. */ 1789 for (i = 0; i < 14; i += 2) { 1790 run_srom_read(sc, RT2860_EEPROM_PWR2GHZ_BASE1 + i / 2, &val); 1791 sc->txpow1[i + 0] = (int8_t)(val & 0xff); 1792 sc->txpow1[i + 1] = (int8_t)(val >> 8); 1793 1794 if (sc->mac_ver != 0x5390) { 1795 run_srom_read(sc, 1796 RT2860_EEPROM_PWR2GHZ_BASE2 + i / 2, &val); 1797 sc->txpow2[i + 0] = (int8_t)(val & 0xff); 1798 sc->txpow2[i + 1] = (int8_t)(val >> 8); 1799 } 1800 } 1801 /* Fix broken Tx power entries. */ 1802 for (i = 0; i < 14; i++) { 1803 if (sc->mac_ver >= 0x5390) { 1804 if (sc->txpow1[i] < 0 || sc->txpow1[i] > 39) 1805 sc->txpow1[i] = 5; 1806 } else { 1807 if (sc->txpow1[i] < 0 || sc->txpow1[i] > 31) 1808 sc->txpow1[i] = 5; 1809 } 1810 if (sc->mac_ver > 0x5390) { 1811 if (sc->txpow2[i] < 0 || sc->txpow2[i] > 39) 1812 sc->txpow2[i] = 5; 1813 } else if (sc->mac_ver < 0x5390) { 1814 if (sc->txpow2[i] < 0 || sc->txpow2[i] > 31) 1815 sc->txpow2[i] = 5; 1816 } 1817 RUN_DPRINTF(sc, RUN_DEBUG_TXPWR, 1818 "chan %d: power1=%d, power2=%d\n", 1819 rt2860_rf2850[i].chan, sc->txpow1[i], sc->txpow2[i]); 1820 } 1821 /* Read power settings for 5GHz channels. */ 1822 for (i = 0; i < 40; i += 2) { 1823 run_srom_read(sc, RT2860_EEPROM_PWR5GHZ_BASE1 + i / 2, &val); 1824 sc->txpow1[i + 14] = (int8_t)(val & 0xff); 1825 sc->txpow1[i + 15] = (int8_t)(val >> 8); 1826 1827 run_srom_read(sc, RT2860_EEPROM_PWR5GHZ_BASE2 + i / 2, &val); 1828 sc->txpow2[i + 14] = (int8_t)(val & 0xff); 1829 sc->txpow2[i + 15] = (int8_t)(val >> 8); 1830 } 1831 /* Fix broken Tx power entries. */ 1832 for (i = 0; i < 40; i++ ) { 1833 if (sc->mac_ver != 0x5592) { 1834 if (sc->txpow1[14 + i] < -7 || sc->txpow1[14 + i] > 15) 1835 sc->txpow1[14 + i] = 5; 1836 if (sc->txpow2[14 + i] < -7 || sc->txpow2[14 + i] > 15) 1837 sc->txpow2[14 + i] = 5; 1838 } 1839 RUN_DPRINTF(sc, RUN_DEBUG_TXPWR, 1840 "chan %d: power1=%d, power2=%d\n", 1841 rt2860_rf2850[14 + i].chan, sc->txpow1[14 + i], 1842 sc->txpow2[14 + i]); 1843 } 1844 } 1845 1846 static int 1847 run_read_eeprom(struct run_softc *sc) 1848 { 1849 struct ieee80211com *ic = &sc->sc_ic; 1850 int8_t delta_2ghz, delta_5ghz; 1851 uint32_t tmp; 1852 uint16_t val; 1853 int ridx, ant, i; 1854 1855 /* check whether the ROM is eFUSE ROM or EEPROM */ 1856 sc->sc_srom_read = run_eeprom_read_2; 1857 if (sc->mac_ver >= 0x3070) { 1858 run_read(sc, RT3070_EFUSE_CTRL, &tmp); 1859 RUN_DPRINTF(sc, RUN_DEBUG_ROM, "EFUSE_CTRL=0x%08x\n", tmp); 1860 if ((tmp & RT3070_SEL_EFUSE) || sc->mac_ver == 0x3593) 1861 sc->sc_srom_read = run_efuse_read_2; 1862 } 1863 1864 /* read ROM version */ 1865 run_srom_read(sc, RT2860_EEPROM_VERSION, &val); 1866 RUN_DPRINTF(sc, RUN_DEBUG_ROM, 1867 "EEPROM rev=%d, FAE=%d\n", val >> 8, val & 0xff); 1868 1869 /* read MAC address */ 1870 run_srom_read(sc, RT2860_EEPROM_MAC01, &val); 1871 ic->ic_macaddr[0] = val & 0xff; 1872 ic->ic_macaddr[1] = val >> 8; 1873 run_srom_read(sc, RT2860_EEPROM_MAC23, &val); 1874 ic->ic_macaddr[2] = val & 0xff; 1875 ic->ic_macaddr[3] = val >> 8; 1876 run_srom_read(sc, RT2860_EEPROM_MAC45, &val); 1877 ic->ic_macaddr[4] = val & 0xff; 1878 ic->ic_macaddr[5] = val >> 8; 1879 1880 if (sc->mac_ver < 0x3593) { 1881 /* read vender BBP settings */ 1882 for (i = 0; i < 10; i++) { 1883 run_srom_read(sc, RT2860_EEPROM_BBP_BASE + i, &val); 1884 sc->bbp[i].val = val & 0xff; 1885 sc->bbp[i].reg = val >> 8; 1886 RUN_DPRINTF(sc, RUN_DEBUG_ROM, 1887 "BBP%d=0x%02x\n", sc->bbp[i].reg, sc->bbp[i].val); 1888 } 1889 if (sc->mac_ver >= 0x3071) { 1890 /* read vendor RF settings */ 1891 for (i = 0; i < 10; i++) { 1892 run_srom_read(sc, RT3071_EEPROM_RF_BASE + i, 1893 &val); 1894 sc->rf[i].val = val & 0xff; 1895 sc->rf[i].reg = val >> 8; 1896 RUN_DPRINTF(sc, RUN_DEBUG_ROM, "RF%d=0x%02x\n", 1897 sc->rf[i].reg, sc->rf[i].val); 1898 } 1899 } 1900 } 1901 1902 /* read RF frequency offset from EEPROM */ 1903 run_srom_read(sc, (sc->mac_ver != 0x3593) ? RT2860_EEPROM_FREQ_LEDS : 1904 RT3593_EEPROM_FREQ, &val); 1905 sc->freq = ((val & 0xff) != 0xff) ? val & 0xff : 0; 1906 RUN_DPRINTF(sc, RUN_DEBUG_ROM, "EEPROM freq offset %d\n", 1907 sc->freq & 0xff); 1908 1909 run_srom_read(sc, (sc->mac_ver != 0x3593) ? RT2860_EEPROM_FREQ_LEDS : 1910 RT3593_EEPROM_FREQ_LEDS, &val); 1911 if (val >> 8 != 0xff) { 1912 /* read LEDs operating mode */ 1913 sc->leds = val >> 8; 1914 run_srom_read(sc, (sc->mac_ver != 0x3593) ? RT2860_EEPROM_LED1 : 1915 RT3593_EEPROM_LED1, &sc->led[0]); 1916 run_srom_read(sc, (sc->mac_ver != 0x3593) ? RT2860_EEPROM_LED2 : 1917 RT3593_EEPROM_LED2, &sc->led[1]); 1918 run_srom_read(sc, (sc->mac_ver != 0x3593) ? RT2860_EEPROM_LED3 : 1919 RT3593_EEPROM_LED3, &sc->led[2]); 1920 } else { 1921 /* broken EEPROM, use default settings */ 1922 sc->leds = 0x01; 1923 sc->led[0] = 0x5555; 1924 sc->led[1] = 0x2221; 1925 sc->led[2] = 0x5627; /* differs from RT2860 */ 1926 } 1927 RUN_DPRINTF(sc, RUN_DEBUG_ROM, 1928 "EEPROM LED mode=0x%02x, LEDs=0x%04x/0x%04x/0x%04x\n", 1929 sc->leds, sc->led[0], sc->led[1], sc->led[2]); 1930 1931 /* read RF information */ 1932 if (sc->mac_ver == 0x5390 || sc->mac_ver ==0x5392) 1933 run_srom_read(sc, 0x00, &val); 1934 else 1935 run_srom_read(sc, RT2860_EEPROM_ANTENNA, &val); 1936 1937 if (val == 0xffff) { 1938 device_printf(sc->sc_dev, 1939 "invalid EEPROM antenna info, using default\n"); 1940 if (sc->mac_ver == 0x3572) { 1941 /* default to RF3052 2T2R */ 1942 sc->rf_rev = RT3070_RF_3052; 1943 sc->ntxchains = 2; 1944 sc->nrxchains = 2; 1945 } else if (sc->mac_ver >= 0x3070) { 1946 /* default to RF3020 1T1R */ 1947 sc->rf_rev = RT3070_RF_3020; 1948 sc->ntxchains = 1; 1949 sc->nrxchains = 1; 1950 } else { 1951 /* default to RF2820 1T2R */ 1952 sc->rf_rev = RT2860_RF_2820; 1953 sc->ntxchains = 1; 1954 sc->nrxchains = 2; 1955 } 1956 } else { 1957 if (sc->mac_ver == 0x5390 || sc->mac_ver ==0x5392) { 1958 sc->rf_rev = val; 1959 run_srom_read(sc, RT2860_EEPROM_ANTENNA, &val); 1960 } else 1961 sc->rf_rev = (val >> 8) & 0xf; 1962 sc->ntxchains = (val >> 4) & 0xf; 1963 sc->nrxchains = val & 0xf; 1964 } 1965 RUN_DPRINTF(sc, RUN_DEBUG_ROM, "EEPROM RF rev=0x%04x chains=%dT%dR\n", 1966 sc->rf_rev, sc->ntxchains, sc->nrxchains); 1967 1968 /* check if RF supports automatic Tx access gain control */ 1969 run_srom_read(sc, RT2860_EEPROM_CONFIG, &val); 1970 RUN_DPRINTF(sc, RUN_DEBUG_ROM, "EEPROM CFG 0x%04x\n", val); 1971 /* check if driver should patch the DAC issue */ 1972 if ((val >> 8) != 0xff) 1973 sc->patch_dac = (val >> 15) & 1; 1974 if ((val & 0xff) != 0xff) { 1975 sc->ext_5ghz_lna = (val >> 3) & 1; 1976 sc->ext_2ghz_lna = (val >> 2) & 1; 1977 /* check if RF supports automatic Tx access gain control */ 1978 sc->calib_2ghz = sc->calib_5ghz = (val >> 1) & 1; 1979 /* check if we have a hardware radio switch */ 1980 sc->rfswitch = val & 1; 1981 } 1982 1983 /* Read Tx power settings. */ 1984 if (sc->mac_ver == 0x3593) 1985 run_rt3593_get_txpower(sc); 1986 else 1987 run_get_txpower(sc); 1988 1989 /* read Tx power compensation for each Tx rate */ 1990 run_srom_read(sc, RT2860_EEPROM_DELTAPWR, &val); 1991 delta_2ghz = delta_5ghz = 0; 1992 if ((val & 0xff) != 0xff && (val & 0x80)) { 1993 delta_2ghz = val & 0xf; 1994 if (!(val & 0x40)) /* negative number */ 1995 delta_2ghz = -delta_2ghz; 1996 } 1997 val >>= 8; 1998 if ((val & 0xff) != 0xff && (val & 0x80)) { 1999 delta_5ghz = val & 0xf; 2000 if (!(val & 0x40)) /* negative number */ 2001 delta_5ghz = -delta_5ghz; 2002 } 2003 RUN_DPRINTF(sc, RUN_DEBUG_ROM | RUN_DEBUG_TXPWR, 2004 "power compensation=%d (2GHz), %d (5GHz)\n", delta_2ghz, delta_5ghz); 2005 2006 for (ridx = 0; ridx < 5; ridx++) { 2007 uint32_t reg; 2008 2009 run_srom_read(sc, RT2860_EEPROM_RPWR + ridx * 2, &val); 2010 reg = val; 2011 run_srom_read(sc, RT2860_EEPROM_RPWR + ridx * 2 + 1, &val); 2012 reg |= (uint32_t)val << 16; 2013 2014 sc->txpow20mhz[ridx] = reg; 2015 sc->txpow40mhz_2ghz[ridx] = b4inc(reg, delta_2ghz); 2016 sc->txpow40mhz_5ghz[ridx] = b4inc(reg, delta_5ghz); 2017 2018 RUN_DPRINTF(sc, RUN_DEBUG_ROM | RUN_DEBUG_TXPWR, 2019 "ridx %d: power 20MHz=0x%08x, 40MHz/2GHz=0x%08x, " 2020 "40MHz/5GHz=0x%08x\n", ridx, sc->txpow20mhz[ridx], 2021 sc->txpow40mhz_2ghz[ridx], sc->txpow40mhz_5ghz[ridx]); 2022 } 2023 2024 /* Read RSSI offsets and LNA gains from EEPROM. */ 2025 run_srom_read(sc, (sc->mac_ver != 0x3593) ? RT2860_EEPROM_RSSI1_2GHZ : 2026 RT3593_EEPROM_RSSI1_2GHZ, &val); 2027 sc->rssi_2ghz[0] = val & 0xff; /* Ant A */ 2028 sc->rssi_2ghz[1] = val >> 8; /* Ant B */ 2029 run_srom_read(sc, (sc->mac_ver != 0x3593) ? RT2860_EEPROM_RSSI2_2GHZ : 2030 RT3593_EEPROM_RSSI2_2GHZ, &val); 2031 if (sc->mac_ver >= 0x3070) { 2032 if (sc->mac_ver == 0x3593) { 2033 sc->txmixgain_2ghz = 0; 2034 sc->rssi_2ghz[2] = val & 0xff; /* Ant C */ 2035 } else { 2036 /* 2037 * On RT3070 chips (limited to 2 Rx chains), this ROM 2038 * field contains the Tx mixer gain for the 2GHz band. 2039 */ 2040 if ((val & 0xff) != 0xff) 2041 sc->txmixgain_2ghz = val & 0x7; 2042 } 2043 RUN_DPRINTF(sc, RUN_DEBUG_ROM, "tx mixer gain=%u (2GHz)\n", 2044 sc->txmixgain_2ghz); 2045 } else 2046 sc->rssi_2ghz[2] = val & 0xff; /* Ant C */ 2047 if (sc->mac_ver == 0x3593) 2048 run_srom_read(sc, RT3593_EEPROM_LNA_5GHZ, &val); 2049 sc->lna[2] = val >> 8; /* channel group 2 */ 2050 2051 run_srom_read(sc, (sc->mac_ver != 0x3593) ? RT2860_EEPROM_RSSI1_5GHZ : 2052 RT3593_EEPROM_RSSI1_5GHZ, &val); 2053 sc->rssi_5ghz[0] = val & 0xff; /* Ant A */ 2054 sc->rssi_5ghz[1] = val >> 8; /* Ant B */ 2055 run_srom_read(sc, (sc->mac_ver != 0x3593) ? RT2860_EEPROM_RSSI2_5GHZ : 2056 RT3593_EEPROM_RSSI2_5GHZ, &val); 2057 if (sc->mac_ver == 0x3572) { 2058 /* 2059 * On RT3572 chips (limited to 2 Rx chains), this ROM 2060 * field contains the Tx mixer gain for the 5GHz band. 2061 */ 2062 if ((val & 0xff) != 0xff) 2063 sc->txmixgain_5ghz = val & 0x7; 2064 RUN_DPRINTF(sc, RUN_DEBUG_ROM, "tx mixer gain=%u (5GHz)\n", 2065 sc->txmixgain_5ghz); 2066 } else 2067 sc->rssi_5ghz[2] = val & 0xff; /* Ant C */ 2068 if (sc->mac_ver == 0x3593) { 2069 sc->txmixgain_5ghz = 0; 2070 run_srom_read(sc, RT3593_EEPROM_LNA_5GHZ, &val); 2071 } 2072 sc->lna[3] = val >> 8; /* channel group 3 */ 2073 2074 run_srom_read(sc, (sc->mac_ver != 0x3593) ? RT2860_EEPROM_LNA : 2075 RT3593_EEPROM_LNA, &val); 2076 sc->lna[0] = val & 0xff; /* channel group 0 */ 2077 sc->lna[1] = val >> 8; /* channel group 1 */ 2078 2079 /* fix broken 5GHz LNA entries */ 2080 if (sc->lna[2] == 0 || sc->lna[2] == 0xff) { 2081 RUN_DPRINTF(sc, RUN_DEBUG_ROM, 2082 "invalid LNA for channel group %d\n", 2); 2083 sc->lna[2] = sc->lna[1]; 2084 } 2085 if (sc->lna[3] == 0 || sc->lna[3] == 0xff) { 2086 RUN_DPRINTF(sc, RUN_DEBUG_ROM, 2087 "invalid LNA for channel group %d\n", 3); 2088 sc->lna[3] = sc->lna[1]; 2089 } 2090 2091 /* fix broken RSSI offset entries */ 2092 for (ant = 0; ant < 3; ant++) { 2093 if (sc->rssi_2ghz[ant] < -10 || sc->rssi_2ghz[ant] > 10) { 2094 RUN_DPRINTF(sc, RUN_DEBUG_ROM | RUN_DEBUG_RSSI, 2095 "invalid RSSI%d offset: %d (2GHz)\n", 2096 ant + 1, sc->rssi_2ghz[ant]); 2097 sc->rssi_2ghz[ant] = 0; 2098 } 2099 if (sc->rssi_5ghz[ant] < -10 || sc->rssi_5ghz[ant] > 10) { 2100 RUN_DPRINTF(sc, RUN_DEBUG_ROM | RUN_DEBUG_RSSI, 2101 "invalid RSSI%d offset: %d (5GHz)\n", 2102 ant + 1, sc->rssi_5ghz[ant]); 2103 sc->rssi_5ghz[ant] = 0; 2104 } 2105 } 2106 return (0); 2107 } 2108 2109 static struct ieee80211_node * 2110 run_node_alloc(struct ieee80211vap *vap, const uint8_t mac[IEEE80211_ADDR_LEN]) 2111 { 2112 return malloc(sizeof (struct run_node), M_80211_NODE, 2113 M_NOWAIT | M_ZERO); 2114 } 2115 2116 static int 2117 run_media_change(if_t ifp) 2118 { 2119 struct ieee80211vap *vap = if_getsoftc(ifp); 2120 struct ieee80211com *ic = vap->iv_ic; 2121 const struct ieee80211_txparam *tp; 2122 struct run_softc *sc = ic->ic_softc; 2123 uint8_t rate, ridx; 2124 int error; 2125 2126 RUN_LOCK(sc); 2127 2128 error = ieee80211_media_change(ifp); 2129 if (error != 0) { 2130 RUN_UNLOCK(sc); 2131 return (error); 2132 } 2133 2134 tp = &vap->iv_txparms[ieee80211_chan2mode(ic->ic_curchan)]; 2135 if (tp->ucastrate != IEEE80211_FIXED_RATE_NONE) { 2136 struct ieee80211_node *ni; 2137 struct run_node *rn; 2138 2139 /* XXX TODO: methodize with MCS rates */ 2140 rate = ic->ic_sup_rates[ic->ic_curmode]. 2141 rs_rates[tp->ucastrate] & IEEE80211_RATE_VAL; 2142 for (ridx = 0; ridx < RT2860_RIDX_MAX; ridx++) 2143 if (rt2860_rates[ridx].rate == rate) 2144 break; 2145 2146 ni = ieee80211_ref_node(vap->iv_bss); 2147 rn = RUN_NODE(ni); 2148 rn->fix_ridx = ridx; 2149 RUN_DPRINTF(sc, RUN_DEBUG_RATE, "rate=%d, fix_ridx=%d\n", 2150 rate, rn->fix_ridx); 2151 ieee80211_free_node(ni); 2152 } 2153 2154 #if 0 2155 if ((if_getflags(ifp) & IFF_UP) && 2156 (if_getdrvflags(ifp) & RUN_RUNNING)){ 2157 run_init_locked(sc); 2158 } 2159 #endif 2160 2161 RUN_UNLOCK(sc); 2162 2163 return (0); 2164 } 2165 2166 static int 2167 run_newstate(struct ieee80211vap *vap, enum ieee80211_state nstate, int arg) 2168 { 2169 const struct ieee80211_txparam *tp; 2170 struct ieee80211com *ic = vap->iv_ic; 2171 struct run_softc *sc = ic->ic_softc; 2172 struct run_vap *rvp = RUN_VAP(vap); 2173 enum ieee80211_state ostate; 2174 uint32_t sta[3]; 2175 uint8_t ratectl; 2176 uint8_t restart_ratectl = 0; 2177 uint8_t bid = 1 << rvp->rvp_id; 2178 2179 ostate = vap->iv_state; 2180 RUN_DPRINTF(sc, RUN_DEBUG_STATE, "%s -> %s\n", 2181 ieee80211_state_name[ostate], 2182 ieee80211_state_name[nstate]); 2183 2184 IEEE80211_UNLOCK(ic); 2185 RUN_LOCK(sc); 2186 2187 ratectl = sc->ratectl_run; /* remember current state */ 2188 sc->ratectl_run = RUN_RATECTL_OFF; 2189 usb_callout_stop(&sc->ratectl_ch); 2190 2191 if (ostate == IEEE80211_S_RUN) { 2192 /* turn link LED off */ 2193 run_set_leds(sc, RT2860_LED_RADIO); 2194 } 2195 2196 switch (nstate) { 2197 case IEEE80211_S_INIT: 2198 restart_ratectl = 1; 2199 2200 if (ostate != IEEE80211_S_RUN) 2201 break; 2202 2203 ratectl &= ~bid; 2204 sc->runbmap &= ~bid; 2205 2206 /* abort TSF synchronization if there is no vap running */ 2207 if (--sc->running == 0) 2208 run_disable_tsf(sc); 2209 break; 2210 2211 case IEEE80211_S_RUN: 2212 if (!(sc->runbmap & bid)) { 2213 if(sc->running++) 2214 restart_ratectl = 1; 2215 sc->runbmap |= bid; 2216 } 2217 2218 m_freem(rvp->beacon_mbuf); 2219 rvp->beacon_mbuf = NULL; 2220 2221 switch (vap->iv_opmode) { 2222 case IEEE80211_M_HOSTAP: 2223 case IEEE80211_M_MBSS: 2224 sc->ap_running |= bid; 2225 ic->ic_opmode = vap->iv_opmode; 2226 run_update_beacon_cb(vap); 2227 break; 2228 case IEEE80211_M_IBSS: 2229 sc->adhoc_running |= bid; 2230 if (!sc->ap_running) 2231 ic->ic_opmode = vap->iv_opmode; 2232 run_update_beacon_cb(vap); 2233 break; 2234 case IEEE80211_M_STA: 2235 sc->sta_running |= bid; 2236 if (!sc->ap_running && !sc->adhoc_running) 2237 ic->ic_opmode = vap->iv_opmode; 2238 2239 /* read statistic counters (clear on read) */ 2240 run_read_region_1(sc, RT2860_TX_STA_CNT0, 2241 (uint8_t *)sta, sizeof sta); 2242 2243 break; 2244 default: 2245 ic->ic_opmode = vap->iv_opmode; 2246 break; 2247 } 2248 2249 if (vap->iv_opmode != IEEE80211_M_MONITOR) { 2250 struct ieee80211_node *ni; 2251 2252 if (ic->ic_bsschan == IEEE80211_CHAN_ANYC) { 2253 RUN_UNLOCK(sc); 2254 IEEE80211_LOCK(ic); 2255 return (-1); 2256 } 2257 run_updateslot(ic); 2258 run_enable_mrr(sc); 2259 run_set_txpreamble(sc); 2260 run_set_basicrates(sc); 2261 ni = ieee80211_ref_node(vap->iv_bss); 2262 IEEE80211_ADDR_COPY(sc->sc_bssid, ni->ni_bssid); 2263 run_set_bssid(sc, sc->sc_bssid); 2264 ieee80211_free_node(ni); 2265 run_enable_tsf_sync(sc); 2266 2267 /* enable automatic rate adaptation */ 2268 tp = &vap->iv_txparms[ieee80211_chan2mode(ic->ic_curchan)]; 2269 if (tp->ucastrate == IEEE80211_FIXED_RATE_NONE) 2270 ratectl |= bid; 2271 } else 2272 run_enable_tsf(sc); 2273 2274 /* turn link LED on */ 2275 run_set_leds(sc, RT2860_LED_RADIO | 2276 (IEEE80211_IS_CHAN_2GHZ(ic->ic_curchan) ? 2277 RT2860_LED_LINK_2GHZ : RT2860_LED_LINK_5GHZ)); 2278 2279 break; 2280 default: 2281 RUN_DPRINTF(sc, RUN_DEBUG_STATE, "undefined state\n"); 2282 break; 2283 } 2284 2285 /* restart amrr for running VAPs */ 2286 if ((sc->ratectl_run = ratectl) && restart_ratectl) 2287 usb_callout_reset(&sc->ratectl_ch, hz, run_ratectl_to, sc); 2288 2289 RUN_UNLOCK(sc); 2290 IEEE80211_LOCK(ic); 2291 2292 return(rvp->newstate(vap, nstate, arg)); 2293 } 2294 2295 static int 2296 run_wme_update(struct ieee80211com *ic) 2297 { 2298 struct chanAccParams chp; 2299 struct run_softc *sc = ic->ic_softc; 2300 const struct wmeParams *ac; 2301 int aci, error = 0; 2302 2303 ieee80211_wme_ic_getparams(ic, &chp); 2304 ac = chp.cap_wmeParams; 2305 2306 /* update MAC TX configuration registers */ 2307 RUN_LOCK(sc); 2308 for (aci = 0; aci < WME_NUM_AC; aci++) { 2309 error = run_write(sc, RT2860_EDCA_AC_CFG(aci), 2310 ac[aci].wmep_logcwmax << 16 | 2311 ac[aci].wmep_logcwmin << 12 | 2312 ac[aci].wmep_aifsn << 8 | 2313 ac[aci].wmep_txopLimit); 2314 if (error) goto err; 2315 } 2316 2317 /* update SCH/DMA registers too */ 2318 error = run_write(sc, RT2860_WMM_AIFSN_CFG, 2319 ac[WME_AC_VO].wmep_aifsn << 12 | 2320 ac[WME_AC_VI].wmep_aifsn << 8 | 2321 ac[WME_AC_BK].wmep_aifsn << 4 | 2322 ac[WME_AC_BE].wmep_aifsn); 2323 if (error) goto err; 2324 error = run_write(sc, RT2860_WMM_CWMIN_CFG, 2325 ac[WME_AC_VO].wmep_logcwmin << 12 | 2326 ac[WME_AC_VI].wmep_logcwmin << 8 | 2327 ac[WME_AC_BK].wmep_logcwmin << 4 | 2328 ac[WME_AC_BE].wmep_logcwmin); 2329 if (error) goto err; 2330 error = run_write(sc, RT2860_WMM_CWMAX_CFG, 2331 ac[WME_AC_VO].wmep_logcwmax << 12 | 2332 ac[WME_AC_VI].wmep_logcwmax << 8 | 2333 ac[WME_AC_BK].wmep_logcwmax << 4 | 2334 ac[WME_AC_BE].wmep_logcwmax); 2335 if (error) goto err; 2336 error = run_write(sc, RT2860_WMM_TXOP0_CFG, 2337 ac[WME_AC_BK].wmep_txopLimit << 16 | 2338 ac[WME_AC_BE].wmep_txopLimit); 2339 if (error) goto err; 2340 error = run_write(sc, RT2860_WMM_TXOP1_CFG, 2341 ac[WME_AC_VO].wmep_txopLimit << 16 | 2342 ac[WME_AC_VI].wmep_txopLimit); 2343 2344 err: 2345 RUN_UNLOCK(sc); 2346 if (error) 2347 RUN_DPRINTF(sc, RUN_DEBUG_USB, "WME update failed\n"); 2348 2349 return (error); 2350 } 2351 2352 static void 2353 run_key_set_cb(void *arg) 2354 { 2355 struct run_cmdq *cmdq = arg; 2356 struct ieee80211vap *vap = cmdq->arg1; 2357 struct ieee80211_key *k = cmdq->k; 2358 struct ieee80211com *ic = vap->iv_ic; 2359 struct run_softc *sc = ic->ic_softc; 2360 struct ieee80211_node *ni; 2361 u_int cipher = k->wk_cipher->ic_cipher; 2362 uint32_t attr; 2363 uint16_t base, associd; 2364 uint8_t mode, wcid, iv[8]; 2365 2366 RUN_LOCK_ASSERT(sc, MA_OWNED); 2367 2368 if (vap->iv_opmode == IEEE80211_M_HOSTAP) 2369 ni = ieee80211_find_vap_node(&ic->ic_sta, vap, cmdq->mac); 2370 else 2371 ni = vap->iv_bss; 2372 associd = (ni != NULL) ? ni->ni_associd : 0; 2373 2374 /* map net80211 cipher to RT2860 security mode */ 2375 switch (cipher) { 2376 case IEEE80211_CIPHER_WEP: 2377 if(k->wk_keylen < 8) 2378 mode = RT2860_MODE_WEP40; 2379 else 2380 mode = RT2860_MODE_WEP104; 2381 break; 2382 case IEEE80211_CIPHER_TKIP: 2383 mode = RT2860_MODE_TKIP; 2384 break; 2385 case IEEE80211_CIPHER_AES_CCM: 2386 mode = RT2860_MODE_AES_CCMP; 2387 break; 2388 default: 2389 RUN_DPRINTF(sc, RUN_DEBUG_KEY, "undefined case\n"); 2390 return; 2391 } 2392 2393 RUN_DPRINTF(sc, RUN_DEBUG_KEY, 2394 "associd=%x, keyix=%d, mode=%x, type=%s, tx=%s, rx=%s\n", 2395 associd, k->wk_keyix, mode, 2396 (k->wk_flags & IEEE80211_KEY_GROUP) ? "group" : "pairwise", 2397 (k->wk_flags & IEEE80211_KEY_XMIT) ? "on" : "off", 2398 (k->wk_flags & IEEE80211_KEY_RECV) ? "on" : "off"); 2399 2400 if (k->wk_flags & IEEE80211_KEY_GROUP) { 2401 wcid = 0; /* NB: update WCID0 for group keys */ 2402 base = RT2860_SKEY(RUN_VAP(vap)->rvp_id, k->wk_keyix); 2403 } else { 2404 wcid = (vap->iv_opmode == IEEE80211_M_STA) ? 2405 1 : RUN_AID2WCID(associd); 2406 base = RT2860_PKEY(wcid); 2407 } 2408 2409 if (cipher == IEEE80211_CIPHER_TKIP) { 2410 if(run_write_region_1(sc, base, k->wk_key, 16)) 2411 return; 2412 if(run_write_region_1(sc, base + 16, &k->wk_key[16], 8)) /* wk_txmic */ 2413 return; 2414 if(run_write_region_1(sc, base + 24, &k->wk_key[24], 8)) /* wk_rxmic */ 2415 return; 2416 } else { 2417 /* roundup len to 16-bit: XXX fix write_region_1() instead */ 2418 if(run_write_region_1(sc, base, k->wk_key, (k->wk_keylen + 1) & ~1)) 2419 return; 2420 } 2421 2422 if (!(k->wk_flags & IEEE80211_KEY_GROUP) || 2423 (k->wk_flags & (IEEE80211_KEY_XMIT | IEEE80211_KEY_RECV))) { 2424 /* set initial packet number in IV+EIV */ 2425 if (cipher == IEEE80211_CIPHER_WEP) { 2426 memset(iv, 0, sizeof iv); 2427 iv[3] = vap->iv_def_txkey << 6; 2428 } else { 2429 if (cipher == IEEE80211_CIPHER_TKIP) { 2430 iv[0] = k->wk_keytsc >> 8; 2431 iv[1] = (iv[0] | 0x20) & 0x7f; 2432 iv[2] = k->wk_keytsc; 2433 } else /* CCMP */ { 2434 iv[0] = k->wk_keytsc; 2435 iv[1] = k->wk_keytsc >> 8; 2436 iv[2] = 0; 2437 } 2438 iv[3] = k->wk_keyix << 6 | IEEE80211_WEP_EXTIV; 2439 iv[4] = k->wk_keytsc >> 16; 2440 iv[5] = k->wk_keytsc >> 24; 2441 iv[6] = k->wk_keytsc >> 32; 2442 iv[7] = k->wk_keytsc >> 40; 2443 } 2444 if (run_write_region_1(sc, RT2860_IVEIV(wcid), iv, 8)) 2445 return; 2446 } 2447 2448 if (k->wk_flags & IEEE80211_KEY_GROUP) { 2449 /* install group key */ 2450 if (run_read(sc, RT2860_SKEY_MODE_0_7, &attr)) 2451 return; 2452 attr &= ~(0xf << (k->wk_keyix * 4)); 2453 attr |= mode << (k->wk_keyix * 4); 2454 if (run_write(sc, RT2860_SKEY_MODE_0_7, attr)) 2455 return; 2456 } else { 2457 /* install pairwise key */ 2458 if (run_read(sc, RT2860_WCID_ATTR(wcid), &attr)) 2459 return; 2460 attr = (attr & ~0xf) | (mode << 1) | RT2860_RX_PKEY_EN; 2461 if (run_write(sc, RT2860_WCID_ATTR(wcid), attr)) 2462 return; 2463 } 2464 2465 /* TODO create a pass-thru key entry? */ 2466 2467 /* need wcid to delete the right key later */ 2468 k->wk_pad = wcid; 2469 } 2470 2471 /* 2472 * Don't have to be deferred, but in order to keep order of 2473 * execution, i.e. with run_key_delete(), defer this and let 2474 * run_cmdq_cb() maintain the order. 2475 * 2476 * return 0 on error 2477 */ 2478 static int 2479 run_key_set(struct ieee80211vap *vap, struct ieee80211_key *k) 2480 { 2481 struct ieee80211com *ic = vap->iv_ic; 2482 struct run_softc *sc = ic->ic_softc; 2483 uint32_t i; 2484 2485 i = RUN_CMDQ_GET(&sc->cmdq_store); 2486 RUN_DPRINTF(sc, RUN_DEBUG_KEY, "cmdq_store=%d\n", i); 2487 sc->cmdq[i].func = run_key_set_cb; 2488 sc->cmdq[i].arg0 = NULL; 2489 sc->cmdq[i].arg1 = vap; 2490 sc->cmdq[i].k = k; 2491 IEEE80211_ADDR_COPY(sc->cmdq[i].mac, k->wk_macaddr); 2492 ieee80211_runtask(ic, &sc->cmdq_task); 2493 2494 /* 2495 * To make sure key will be set when hostapd 2496 * calls iv_key_set() before if_init(). 2497 */ 2498 if (vap->iv_opmode == IEEE80211_M_HOSTAP) { 2499 RUN_LOCK(sc); 2500 sc->cmdq_key_set = RUN_CMDQ_GO; 2501 RUN_UNLOCK(sc); 2502 } 2503 2504 return (1); 2505 } 2506 2507 /* 2508 * If wlan is destroyed without being brought down i.e. without 2509 * wlan down or wpa_cli terminate, this function is called after 2510 * vap is gone. Don't refer it. 2511 */ 2512 static void 2513 run_key_delete_cb(void *arg) 2514 { 2515 struct run_cmdq *cmdq = arg; 2516 struct run_softc *sc = cmdq->arg1; 2517 struct ieee80211_key *k = &cmdq->key; 2518 uint32_t attr; 2519 uint8_t wcid; 2520 2521 RUN_LOCK_ASSERT(sc, MA_OWNED); 2522 2523 if (k->wk_flags & IEEE80211_KEY_GROUP) { 2524 /* remove group key */ 2525 RUN_DPRINTF(sc, RUN_DEBUG_KEY, "removing group key\n"); 2526 run_read(sc, RT2860_SKEY_MODE_0_7, &attr); 2527 attr &= ~(0xf << (k->wk_keyix * 4)); 2528 run_write(sc, RT2860_SKEY_MODE_0_7, attr); 2529 } else { 2530 /* remove pairwise key */ 2531 RUN_DPRINTF(sc, RUN_DEBUG_KEY, 2532 "removing key for wcid %x\n", k->wk_pad); 2533 /* matching wcid was written to wk_pad in run_key_set() */ 2534 wcid = k->wk_pad; 2535 run_read(sc, RT2860_WCID_ATTR(wcid), &attr); 2536 attr &= ~0xf; 2537 run_write(sc, RT2860_WCID_ATTR(wcid), attr); 2538 run_set_region_4(sc, RT2860_WCID_ENTRY(wcid), 0, 8); 2539 } 2540 2541 k->wk_pad = 0; 2542 } 2543 2544 /* 2545 * return 0 on error 2546 */ 2547 static int 2548 run_key_delete(struct ieee80211vap *vap, struct ieee80211_key *k) 2549 { 2550 struct ieee80211com *ic = vap->iv_ic; 2551 struct run_softc *sc = ic->ic_softc; 2552 struct ieee80211_key *k0; 2553 uint32_t i; 2554 2555 /* 2556 * When called back, key might be gone. So, make a copy 2557 * of some values need to delete keys before deferring. 2558 * But, because of LOR with node lock, cannot use lock here. 2559 * So, use atomic instead. 2560 */ 2561 i = RUN_CMDQ_GET(&sc->cmdq_store); 2562 RUN_DPRINTF(sc, RUN_DEBUG_KEY, "cmdq_store=%d\n", i); 2563 sc->cmdq[i].func = run_key_delete_cb; 2564 sc->cmdq[i].arg0 = NULL; 2565 sc->cmdq[i].arg1 = sc; 2566 k0 = &sc->cmdq[i].key; 2567 k0->wk_flags = k->wk_flags; 2568 k0->wk_keyix = k->wk_keyix; 2569 /* matching wcid was written to wk_pad in run_key_set() */ 2570 k0->wk_pad = k->wk_pad; 2571 ieee80211_runtask(ic, &sc->cmdq_task); 2572 return (1); /* return fake success */ 2573 2574 } 2575 2576 static void 2577 run_ratectl_to(void *arg) 2578 { 2579 struct run_softc *sc = arg; 2580 2581 /* do it in a process context, so it can go sleep */ 2582 ieee80211_runtask(&sc->sc_ic, &sc->ratectl_task); 2583 /* next timeout will be rescheduled in the callback task */ 2584 } 2585 2586 /* ARGSUSED */ 2587 static void 2588 run_ratectl_cb(void *arg, int pending) 2589 { 2590 struct run_softc *sc = arg; 2591 struct ieee80211com *ic = &sc->sc_ic; 2592 struct ieee80211vap *vap = TAILQ_FIRST(&ic->ic_vaps); 2593 2594 if (vap == NULL) 2595 return; 2596 2597 if (sc->rvp_cnt > 1 || vap->iv_opmode != IEEE80211_M_STA) { 2598 /* 2599 * run_reset_livelock() doesn't do anything with AMRR, 2600 * but Ralink wants us to call it every 1 sec. So, we 2601 * piggyback here rather than creating another callout. 2602 * Livelock may occur only in HOSTAP or IBSS mode 2603 * (when h/w is sending beacons). 2604 */ 2605 RUN_LOCK(sc); 2606 run_reset_livelock(sc); 2607 /* just in case, there are some stats to drain */ 2608 run_drain_fifo(sc); 2609 RUN_UNLOCK(sc); 2610 } 2611 2612 ieee80211_iterate_nodes(&ic->ic_sta, run_iter_func, sc); 2613 2614 RUN_LOCK(sc); 2615 if(sc->ratectl_run != RUN_RATECTL_OFF) 2616 usb_callout_reset(&sc->ratectl_ch, hz, run_ratectl_to, sc); 2617 RUN_UNLOCK(sc); 2618 } 2619 2620 static void 2621 run_drain_fifo(void *arg) 2622 { 2623 struct run_softc *sc = arg; 2624 uint32_t stat; 2625 uint16_t (*wstat)[3]; 2626 uint8_t wcid, mcs, pid; 2627 int8_t retry; 2628 2629 RUN_LOCK_ASSERT(sc, MA_OWNED); 2630 2631 for (;;) { 2632 /* drain Tx status FIFO (maxsize = 16) */ 2633 run_read(sc, RT2860_TX_STAT_FIFO, &stat); 2634 RUN_DPRINTF(sc, RUN_DEBUG_XMIT, "tx stat 0x%08x\n", stat); 2635 if (!(stat & RT2860_TXQ_VLD)) 2636 break; 2637 2638 wcid = (stat >> RT2860_TXQ_WCID_SHIFT) & 0xff; 2639 2640 /* if no ACK was requested, no feedback is available */ 2641 if (!(stat & RT2860_TXQ_ACKREQ) || wcid > RT2870_WCID_MAX || 2642 wcid == 0) 2643 continue; 2644 2645 /* 2646 * Even though each stat is Tx-complete-status like format, 2647 * the device can poll stats. Because there is no guarantee 2648 * that the referring node is still around when read the stats. 2649 * So that, if we use ieee80211_ratectl_tx_update(), we will 2650 * have hard time not to refer already freed node. 2651 * 2652 * To eliminate such page faults, we poll stats in softc. 2653 * Then, update the rates later with ieee80211_ratectl_tx_update(). 2654 */ 2655 wstat = &(sc->wcid_stats[wcid]); 2656 (*wstat)[RUN_TXCNT]++; 2657 if (stat & RT2860_TXQ_OK) 2658 (*wstat)[RUN_SUCCESS]++; 2659 else 2660 counter_u64_add(sc->sc_ic.ic_oerrors, 1); 2661 /* 2662 * Check if there were retries, ie if the Tx success rate is 2663 * different from the requested rate. Note that it works only 2664 * because we do not allow rate fallback from OFDM to CCK. 2665 */ 2666 mcs = (stat >> RT2860_TXQ_MCS_SHIFT) & 0x7f; 2667 pid = (stat >> RT2860_TXQ_PID_SHIFT) & 0xf; 2668 if ((retry = pid -1 - mcs) > 0) { 2669 (*wstat)[RUN_TXCNT] += retry; 2670 (*wstat)[RUN_RETRY] += retry; 2671 } 2672 } 2673 RUN_DPRINTF(sc, RUN_DEBUG_XMIT, "count=%d\n", sc->fifo_cnt); 2674 2675 sc->fifo_cnt = 0; 2676 } 2677 2678 static void 2679 run_iter_func(void *arg, struct ieee80211_node *ni) 2680 { 2681 struct run_softc *sc = arg; 2682 struct ieee80211_ratectl_tx_stats *txs = &sc->sc_txs; 2683 struct ieee80211vap *vap = ni->ni_vap; 2684 struct run_node *rn = RUN_NODE(ni); 2685 union run_stats sta[2]; 2686 uint16_t (*wstat)[3]; 2687 int error, ridx; 2688 2689 RUN_LOCK(sc); 2690 2691 /* Check for special case */ 2692 if (sc->rvp_cnt <= 1 && vap->iv_opmode == IEEE80211_M_STA && 2693 ni != vap->iv_bss) 2694 goto fail; 2695 2696 txs->flags = IEEE80211_RATECTL_TX_STATS_NODE | 2697 IEEE80211_RATECTL_TX_STATS_RETRIES; 2698 txs->ni = ni; 2699 if (sc->rvp_cnt <= 1 && (vap->iv_opmode == IEEE80211_M_IBSS || 2700 vap->iv_opmode == IEEE80211_M_STA)) { 2701 /* read statistic counters (clear on read) and update AMRR state */ 2702 error = run_read_region_1(sc, RT2860_TX_STA_CNT0, (uint8_t *)sta, 2703 sizeof sta); 2704 if (error != 0) 2705 goto fail; 2706 2707 /* count failed TX as errors */ 2708 if_inc_counter(vap->iv_ifp, IFCOUNTER_OERRORS, 2709 le16toh(sta[0].error.fail)); 2710 2711 txs->nretries = le16toh(sta[1].tx.retry); 2712 txs->nsuccess = le16toh(sta[1].tx.success); 2713 /* nretries??? */ 2714 txs->nframes = txs->nretries + txs->nsuccess + 2715 le16toh(sta[0].error.fail); 2716 2717 RUN_DPRINTF(sc, RUN_DEBUG_RATE, 2718 "retrycnt=%d success=%d failcnt=%d\n", 2719 txs->nretries, txs->nsuccess, le16toh(sta[0].error.fail)); 2720 } else { 2721 wstat = &(sc->wcid_stats[RUN_AID2WCID(ni->ni_associd)]); 2722 2723 if (wstat == &(sc->wcid_stats[0]) || 2724 wstat > &(sc->wcid_stats[RT2870_WCID_MAX])) 2725 goto fail; 2726 2727 txs->nretries = (*wstat)[RUN_RETRY]; 2728 txs->nsuccess = (*wstat)[RUN_SUCCESS]; 2729 txs->nframes = (*wstat)[RUN_TXCNT]; 2730 RUN_DPRINTF(sc, RUN_DEBUG_RATE, 2731 "retrycnt=%d txcnt=%d success=%d\n", 2732 txs->nretries, txs->nframes, txs->nsuccess); 2733 2734 memset(wstat, 0, sizeof(*wstat)); 2735 } 2736 2737 ieee80211_ratectl_tx_update(vap, txs); 2738 ieee80211_ratectl_rate(ni, NULL, 0); 2739 /* XXX TODO: methodize with MCS rates */ 2740 for (ridx = 0; ridx < RT2860_RIDX_MAX; ridx++) 2741 if (rt2860_rates[ridx].rate == ni->ni_txrate) 2742 break; 2743 rn->amrr_ridx = ridx; 2744 2745 fail: 2746 RUN_UNLOCK(sc); 2747 2748 RUN_DPRINTF(sc, RUN_DEBUG_RATE, "rate=%d, ridx=%d\n", ni->ni_txrate, rn->amrr_ridx); 2749 } 2750 2751 static void 2752 run_newassoc_cb(void *arg) 2753 { 2754 struct run_cmdq *cmdq = arg; 2755 struct ieee80211_node *ni = cmdq->arg1; 2756 struct run_softc *sc = ni->ni_vap->iv_ic->ic_softc; 2757 uint8_t wcid = cmdq->wcid; 2758 2759 RUN_LOCK_ASSERT(sc, MA_OWNED); 2760 2761 run_write_region_1(sc, RT2860_WCID_ENTRY(wcid), 2762 ni->ni_macaddr, IEEE80211_ADDR_LEN); 2763 2764 memset(&(sc->wcid_stats[wcid]), 0, sizeof(sc->wcid_stats[wcid])); 2765 } 2766 2767 static void 2768 run_newassoc(struct ieee80211_node *ni, int isnew) 2769 { 2770 struct run_node *rn = RUN_NODE(ni); 2771 struct ieee80211vap *vap = ni->ni_vap; 2772 struct ieee80211com *ic = vap->iv_ic; 2773 struct run_softc *sc = ic->ic_softc; 2774 uint8_t rate; 2775 uint8_t ridx; 2776 uint8_t wcid; 2777 2778 wcid = (vap->iv_opmode == IEEE80211_M_STA) ? 2779 1 : RUN_AID2WCID(ni->ni_associd); 2780 2781 if (wcid > RT2870_WCID_MAX) { 2782 device_printf(sc->sc_dev, "wcid=%d out of range\n", wcid); 2783 return; 2784 } 2785 2786 /* only interested in true associations */ 2787 if (isnew && ni->ni_associd != 0) { 2788 /* 2789 * This function could is called though timeout function. 2790 * Need to defer. 2791 */ 2792 uint32_t cnt = RUN_CMDQ_GET(&sc->cmdq_store); 2793 RUN_DPRINTF(sc, RUN_DEBUG_STATE, "cmdq_store=%d\n", cnt); 2794 sc->cmdq[cnt].func = run_newassoc_cb; 2795 sc->cmdq[cnt].arg0 = NULL; 2796 sc->cmdq[cnt].arg1 = ni; 2797 sc->cmdq[cnt].wcid = wcid; 2798 ieee80211_runtask(ic, &sc->cmdq_task); 2799 } 2800 2801 RUN_DPRINTF(sc, RUN_DEBUG_STATE, 2802 "new assoc isnew=%d associd=%x addr=%s\n", 2803 isnew, ni->ni_associd, ether_sprintf(ni->ni_macaddr)); 2804 2805 rate = vap->iv_txparms[ieee80211_chan2mode(ic->ic_curchan)].mgmtrate; 2806 /* XXX TODO: methodize with MCS rates */ 2807 for (ridx = 0; ridx < RT2860_RIDX_MAX; ridx++) 2808 if (rt2860_rates[ridx].rate == rate) 2809 break; 2810 rn->mgt_ridx = ridx; 2811 RUN_DPRINTF(sc, RUN_DEBUG_STATE | RUN_DEBUG_RATE, 2812 "rate=%d, mgmt_ridx=%d\n", rate, rn->mgt_ridx); 2813 2814 RUN_LOCK(sc); 2815 if(sc->ratectl_run != RUN_RATECTL_OFF) 2816 usb_callout_reset(&sc->ratectl_ch, hz, run_ratectl_to, sc); 2817 RUN_UNLOCK(sc); 2818 } 2819 2820 /* 2821 * Return the Rx chain with the highest RSSI for a given frame. 2822 */ 2823 static __inline uint8_t 2824 run_maxrssi_chain(struct run_softc *sc, const struct rt2860_rxwi *rxwi) 2825 { 2826 uint8_t rxchain = 0; 2827 2828 if (sc->nrxchains > 1) { 2829 if (rxwi->rssi[1] > rxwi->rssi[rxchain]) 2830 rxchain = 1; 2831 if (sc->nrxchains > 2) 2832 if (rxwi->rssi[2] > rxwi->rssi[rxchain]) 2833 rxchain = 2; 2834 } 2835 return (rxchain); 2836 } 2837 2838 static void 2839 run_recv_mgmt(struct ieee80211_node *ni, struct mbuf *m, int subtype, 2840 const struct ieee80211_rx_stats *rxs, int rssi, int nf) 2841 { 2842 struct ieee80211vap *vap = ni->ni_vap; 2843 struct run_softc *sc = vap->iv_ic->ic_softc; 2844 struct run_vap *rvp = RUN_VAP(vap); 2845 uint64_t ni_tstamp, rx_tstamp; 2846 2847 rvp->recv_mgmt(ni, m, subtype, rxs, rssi, nf); 2848 2849 if (vap->iv_state == IEEE80211_S_RUN && 2850 (subtype == IEEE80211_FC0_SUBTYPE_BEACON || 2851 subtype == IEEE80211_FC0_SUBTYPE_PROBE_RESP)) { 2852 ni_tstamp = le64toh(ni->ni_tstamp.tsf); 2853 RUN_LOCK(sc); 2854 run_get_tsf(sc, &rx_tstamp); 2855 RUN_UNLOCK(sc); 2856 rx_tstamp = le64toh(rx_tstamp); 2857 2858 if (ni_tstamp >= rx_tstamp) { 2859 RUN_DPRINTF(sc, RUN_DEBUG_RECV | RUN_DEBUG_BEACON, 2860 "ibss merge, tsf %ju tstamp %ju\n", 2861 (uintmax_t)rx_tstamp, (uintmax_t)ni_tstamp); 2862 (void) ieee80211_ibss_merge(ni); 2863 } 2864 } 2865 } 2866 2867 static void 2868 run_rx_frame(struct run_softc *sc, struct mbuf *m, uint32_t dmalen) 2869 { 2870 struct ieee80211com *ic = &sc->sc_ic; 2871 struct ieee80211_frame *wh; 2872 struct ieee80211_node *ni; 2873 struct epoch_tracker et; 2874 struct rt2870_rxd *rxd; 2875 struct rt2860_rxwi *rxwi; 2876 uint32_t flags; 2877 uint16_t len, rxwisize; 2878 uint8_t ant, rssi; 2879 int8_t nf; 2880 2881 rxwisize = sizeof(struct rt2860_rxwi); 2882 if (sc->mac_ver == 0x5592) 2883 rxwisize += sizeof(uint64_t); 2884 else if (sc->mac_ver == 0x3593) 2885 rxwisize += sizeof(uint32_t); 2886 2887 if (__predict_false(dmalen < 2888 rxwisize + sizeof(struct ieee80211_frame_ack))) { 2889 RUN_DPRINTF(sc, RUN_DEBUG_RECV, 2890 "payload is too short: dma length %u < %zu\n", 2891 dmalen, rxwisize + sizeof(struct ieee80211_frame_ack)); 2892 goto fail; 2893 } 2894 2895 rxwi = mtod(m, struct rt2860_rxwi *); 2896 len = le16toh(rxwi->len) & 0xfff; 2897 2898 if (__predict_false(len > dmalen - rxwisize)) { 2899 RUN_DPRINTF(sc, RUN_DEBUG_RECV, 2900 "bad RXWI length %u > %u\n", len, dmalen); 2901 goto fail; 2902 } 2903 2904 /* Rx descriptor is located at the end */ 2905 rxd = (struct rt2870_rxd *)(mtod(m, caddr_t) + dmalen); 2906 flags = le32toh(rxd->flags); 2907 2908 if (__predict_false(flags & (RT2860_RX_CRCERR | RT2860_RX_ICVERR))) { 2909 RUN_DPRINTF(sc, RUN_DEBUG_RECV, "%s error.\n", 2910 (flags & RT2860_RX_CRCERR)?"CRC":"ICV"); 2911 goto fail; 2912 } 2913 2914 if (flags & RT2860_RX_L2PAD) { 2915 RUN_DPRINTF(sc, RUN_DEBUG_RECV, 2916 "received RT2860_RX_L2PAD frame\n"); 2917 len += 2; 2918 } 2919 2920 m->m_data += rxwisize; 2921 m->m_pkthdr.len = m->m_len = len; 2922 2923 wh = mtod(m, struct ieee80211_frame *); 2924 2925 if ((wh->i_fc[1] & IEEE80211_FC1_PROTECTED) != 0 && 2926 (flags & RT2860_RX_DEC) != 0) { 2927 wh->i_fc[1] &= ~IEEE80211_FC1_PROTECTED; 2928 m->m_flags |= M_WEP; 2929 } 2930 2931 if (len >= sizeof(struct ieee80211_frame_min)) { 2932 ni = ieee80211_find_rxnode(ic, 2933 mtod(m, struct ieee80211_frame_min *)); 2934 } else 2935 ni = NULL; 2936 2937 if(ni && ni->ni_flags & IEEE80211_NODE_HT) { 2938 m->m_flags |= M_AMPDU; 2939 } 2940 2941 if (__predict_false(flags & RT2860_RX_MICERR)) { 2942 /* report MIC failures to net80211 for TKIP */ 2943 if (ni != NULL) 2944 ieee80211_notify_michael_failure(ni->ni_vap, wh, 2945 rxwi->keyidx); 2946 RUN_DPRINTF(sc, RUN_DEBUG_RECV, 2947 "MIC error. Someone is lying.\n"); 2948 goto fail; 2949 } 2950 2951 ant = run_maxrssi_chain(sc, rxwi); 2952 rssi = rxwi->rssi[ant]; 2953 nf = run_rssi2dbm(sc, rssi, ant); 2954 2955 if (__predict_false(ieee80211_radiotap_active(ic))) { 2956 struct run_rx_radiotap_header *tap = &sc->sc_rxtap; 2957 uint16_t phy; 2958 2959 tap->wr_flags = 0; 2960 if (flags & RT2860_RX_L2PAD) 2961 tap->wr_flags |= IEEE80211_RADIOTAP_F_DATAPAD; 2962 tap->wr_antsignal = rssi; 2963 tap->wr_antenna = ant; 2964 tap->wr_dbm_antsignal = run_rssi2dbm(sc, rssi, ant); 2965 tap->wr_rate = 2; /* in case it can't be found below */ 2966 RUN_LOCK(sc); 2967 run_get_tsf(sc, &tap->wr_tsf); 2968 RUN_UNLOCK(sc); 2969 phy = le16toh(rxwi->phy); 2970 switch (phy & RT2860_PHY_MODE) { 2971 case RT2860_PHY_CCK: 2972 switch ((phy & RT2860_PHY_MCS) & ~RT2860_PHY_SHPRE) { 2973 case 0: tap->wr_rate = 2; break; 2974 case 1: tap->wr_rate = 4; break; 2975 case 2: tap->wr_rate = 11; break; 2976 case 3: tap->wr_rate = 22; break; 2977 } 2978 if (phy & RT2860_PHY_SHPRE) 2979 tap->wr_flags |= IEEE80211_RADIOTAP_F_SHORTPRE; 2980 break; 2981 case RT2860_PHY_OFDM: 2982 switch (phy & RT2860_PHY_MCS) { 2983 case 0: tap->wr_rate = 12; break; 2984 case 1: tap->wr_rate = 18; break; 2985 case 2: tap->wr_rate = 24; break; 2986 case 3: tap->wr_rate = 36; break; 2987 case 4: tap->wr_rate = 48; break; 2988 case 5: tap->wr_rate = 72; break; 2989 case 6: tap->wr_rate = 96; break; 2990 case 7: tap->wr_rate = 108; break; 2991 } 2992 break; 2993 } 2994 } 2995 2996 NET_EPOCH_ENTER(et); 2997 if (ni != NULL) { 2998 (void)ieee80211_input(ni, m, rssi, nf); 2999 ieee80211_free_node(ni); 3000 } else { 3001 (void)ieee80211_input_all(ic, m, rssi, nf); 3002 } 3003 NET_EPOCH_EXIT(et); 3004 3005 return; 3006 3007 fail: 3008 m_freem(m); 3009 counter_u64_add(ic->ic_ierrors, 1); 3010 } 3011 3012 static void 3013 run_bulk_rx_callback(struct usb_xfer *xfer, usb_error_t error) 3014 { 3015 struct run_softc *sc = usbd_xfer_softc(xfer); 3016 struct ieee80211com *ic = &sc->sc_ic; 3017 struct mbuf *m = NULL; 3018 struct mbuf *m0; 3019 uint32_t dmalen, mbuf_len; 3020 uint16_t rxwisize; 3021 int xferlen; 3022 3023 rxwisize = sizeof(struct rt2860_rxwi); 3024 if (sc->mac_ver == 0x5592) 3025 rxwisize += sizeof(uint64_t); 3026 else if (sc->mac_ver == 0x3593) 3027 rxwisize += sizeof(uint32_t); 3028 3029 usbd_xfer_status(xfer, &xferlen, NULL, NULL, NULL); 3030 3031 switch (USB_GET_STATE(xfer)) { 3032 case USB_ST_TRANSFERRED: 3033 3034 RUN_DPRINTF(sc, RUN_DEBUG_RECV, 3035 "rx done, actlen=%d\n", xferlen); 3036 3037 if (xferlen < (int)(sizeof(uint32_t) + rxwisize + 3038 sizeof(struct rt2870_rxd))) { 3039 RUN_DPRINTF(sc, RUN_DEBUG_RECV_DESC | RUN_DEBUG_USB, 3040 "xfer too short %d\n", xferlen); 3041 goto tr_setup; 3042 } 3043 3044 m = sc->rx_m; 3045 sc->rx_m = NULL; 3046 3047 /* FALLTHROUGH */ 3048 case USB_ST_SETUP: 3049 tr_setup: 3050 if (sc->rx_m == NULL) { 3051 sc->rx_m = m_getjcl(M_NOWAIT, MT_DATA, M_PKTHDR, 3052 RUN_MAX_RXSZ); 3053 } 3054 if (sc->rx_m == NULL) { 3055 RUN_DPRINTF(sc, RUN_DEBUG_RECV | 3056 RUN_DEBUG_RECV_DESC | RUN_DEBUG_USB, 3057 "could not allocate mbuf - idle with stall\n"); 3058 counter_u64_add(ic->ic_ierrors, 1); 3059 usbd_xfer_set_stall(xfer); 3060 usbd_xfer_set_frames(xfer, 0); 3061 } else { 3062 /* 3063 * Directly loading a mbuf cluster into DMA to 3064 * save some data copying. This works because 3065 * there is only one cluster. 3066 */ 3067 usbd_xfer_set_frame_data(xfer, 0, 3068 mtod(sc->rx_m, caddr_t), RUN_MAX_RXSZ); 3069 usbd_xfer_set_frames(xfer, 1); 3070 } 3071 usbd_transfer_submit(xfer); 3072 break; 3073 3074 default: /* Error */ 3075 if (error != USB_ERR_CANCELLED) { 3076 /* try to clear stall first */ 3077 usbd_xfer_set_stall(xfer); 3078 if (error == USB_ERR_TIMEOUT) 3079 device_printf(sc->sc_dev, "device timeout\n"); 3080 counter_u64_add(ic->ic_ierrors, 1); 3081 goto tr_setup; 3082 } 3083 if (sc->rx_m != NULL) { 3084 m_freem(sc->rx_m); 3085 sc->rx_m = NULL; 3086 } 3087 break; 3088 } 3089 3090 if (m == NULL) 3091 return; 3092 3093 /* inputting all the frames must be last */ 3094 3095 RUN_UNLOCK(sc); 3096 3097 m->m_pkthdr.len = m->m_len = xferlen; 3098 3099 /* HW can aggregate multiple 802.11 frames in a single USB xfer */ 3100 for(;;) { 3101 dmalen = le32toh(*mtod(m, uint32_t *)) & 0xffff; 3102 3103 if ((dmalen >= (uint32_t)-8) || (dmalen == 0) || 3104 ((dmalen & 3) != 0)) { 3105 RUN_DPRINTF(sc, RUN_DEBUG_RECV_DESC | RUN_DEBUG_USB, 3106 "bad DMA length %u\n", dmalen); 3107 break; 3108 } 3109 if ((dmalen + 8) > (uint32_t)xferlen) { 3110 RUN_DPRINTF(sc, RUN_DEBUG_RECV_DESC | RUN_DEBUG_USB, 3111 "bad DMA length %u > %d\n", 3112 dmalen + 8, xferlen); 3113 break; 3114 } 3115 3116 /* If it is the last one or a single frame, we won't copy. */ 3117 if ((xferlen -= dmalen + 8) <= 8) { 3118 /* trim 32-bit DMA-len header */ 3119 m->m_data += 4; 3120 m->m_pkthdr.len = m->m_len -= 4; 3121 run_rx_frame(sc, m, dmalen); 3122 m = NULL; /* don't free source buffer */ 3123 break; 3124 } 3125 3126 mbuf_len = dmalen + sizeof(struct rt2870_rxd); 3127 if (__predict_false(mbuf_len > MCLBYTES)) { 3128 RUN_DPRINTF(sc, RUN_DEBUG_RECV_DESC | RUN_DEBUG_USB, 3129 "payload is too big: mbuf_len %u\n", mbuf_len); 3130 counter_u64_add(ic->ic_ierrors, 1); 3131 break; 3132 } 3133 3134 /* copy aggregated frames to another mbuf */ 3135 m0 = m_getcl(M_NOWAIT, MT_DATA, M_PKTHDR); 3136 if (__predict_false(m0 == NULL)) { 3137 RUN_DPRINTF(sc, RUN_DEBUG_RECV_DESC, 3138 "could not allocate mbuf\n"); 3139 counter_u64_add(ic->ic_ierrors, 1); 3140 break; 3141 } 3142 m_copydata(m, 4 /* skip 32-bit DMA-len header */, 3143 mbuf_len, mtod(m0, caddr_t)); 3144 m0->m_pkthdr.len = m0->m_len = mbuf_len; 3145 run_rx_frame(sc, m0, dmalen); 3146 3147 /* update data ptr */ 3148 m->m_data += mbuf_len + 4; 3149 m->m_pkthdr.len = m->m_len -= mbuf_len + 4; 3150 } 3151 3152 /* make sure we free the source buffer, if any */ 3153 m_freem(m); 3154 3155 #ifdef IEEE80211_SUPPORT_SUPERG 3156 ieee80211_ff_age_all(ic, 100); 3157 #endif 3158 RUN_LOCK(sc); 3159 } 3160 3161 static void 3162 run_tx_free(struct run_endpoint_queue *pq, 3163 struct run_tx_data *data, int txerr) 3164 { 3165 3166 ieee80211_tx_complete(data->ni, data->m, txerr); 3167 3168 data->m = NULL; 3169 data->ni = NULL; 3170 3171 STAILQ_INSERT_TAIL(&pq->tx_fh, data, next); 3172 pq->tx_nfree++; 3173 } 3174 3175 static void 3176 run_bulk_tx_callbackN(struct usb_xfer *xfer, usb_error_t error, u_int index) 3177 { 3178 struct run_softc *sc = usbd_xfer_softc(xfer); 3179 struct ieee80211com *ic = &sc->sc_ic; 3180 struct run_tx_data *data; 3181 struct ieee80211vap *vap = NULL; 3182 struct usb_page_cache *pc; 3183 struct run_endpoint_queue *pq = &sc->sc_epq[index]; 3184 struct mbuf *m; 3185 usb_frlength_t size; 3186 int actlen; 3187 int sumlen; 3188 3189 usbd_xfer_status(xfer, &actlen, &sumlen, NULL, NULL); 3190 3191 switch (USB_GET_STATE(xfer)) { 3192 case USB_ST_TRANSFERRED: 3193 RUN_DPRINTF(sc, RUN_DEBUG_XMIT | RUN_DEBUG_USB, 3194 "transfer complete: %d bytes @ index %d\n", actlen, index); 3195 3196 data = usbd_xfer_get_priv(xfer); 3197 run_tx_free(pq, data, 0); 3198 usbd_xfer_set_priv(xfer, NULL); 3199 3200 /* FALLTHROUGH */ 3201 case USB_ST_SETUP: 3202 tr_setup: 3203 data = STAILQ_FIRST(&pq->tx_qh); 3204 if (data == NULL) 3205 break; 3206 3207 STAILQ_REMOVE_HEAD(&pq->tx_qh, next); 3208 3209 m = data->m; 3210 size = (sc->mac_ver == 0x5592) ? 3211 sizeof(data->desc) + sizeof(uint32_t) : sizeof(data->desc); 3212 if ((m->m_pkthdr.len + 3213 size + 3 + 8) > RUN_MAX_TXSZ) { 3214 RUN_DPRINTF(sc, RUN_DEBUG_XMIT_DESC | RUN_DEBUG_USB, 3215 "data overflow, %u bytes\n", m->m_pkthdr.len); 3216 run_tx_free(pq, data, 1); 3217 goto tr_setup; 3218 } 3219 3220 pc = usbd_xfer_get_frame(xfer, 0); 3221 usbd_copy_in(pc, 0, &data->desc, size); 3222 usbd_m_copy_in(pc, size, m, 0, m->m_pkthdr.len); 3223 size += m->m_pkthdr.len; 3224 /* 3225 * Align end on a 4-byte boundary, pad 8 bytes (CRC + 3226 * 4-byte padding), and be sure to zero those trailing 3227 * bytes: 3228 */ 3229 usbd_frame_zero(pc, size, ((-size) & 3) + 8); 3230 size += ((-size) & 3) + 8; 3231 3232 vap = data->ni->ni_vap; 3233 if (ieee80211_radiotap_active_vap(vap)) { 3234 const struct ieee80211_frame *wh; 3235 struct run_tx_radiotap_header *tap = &sc->sc_txtap; 3236 struct rt2860_txwi *txwi = 3237 (struct rt2860_txwi *)(&data->desc + sizeof(struct rt2870_txd)); 3238 int has_l2pad; 3239 3240 wh = mtod(m, struct ieee80211_frame *); 3241 has_l2pad = IEEE80211_HAS_ADDR4(wh) != 3242 IEEE80211_QOS_HAS_SEQ(wh); 3243 3244 tap->wt_flags = 0; 3245 tap->wt_rate = rt2860_rates[data->ridx].rate; 3246 tap->wt_hwqueue = index; 3247 if (le16toh(txwi->phy) & RT2860_PHY_SHPRE) 3248 tap->wt_flags |= IEEE80211_RADIOTAP_F_SHORTPRE; 3249 if (has_l2pad) 3250 tap->wt_flags |= IEEE80211_RADIOTAP_F_DATAPAD; 3251 3252 ieee80211_radiotap_tx(vap, m); 3253 } 3254 3255 RUN_DPRINTF(sc, RUN_DEBUG_XMIT | RUN_DEBUG_USB, 3256 "sending frame len=%u/%u @ index %d\n", 3257 m->m_pkthdr.len, size, index); 3258 3259 usbd_xfer_set_frame_len(xfer, 0, size); 3260 usbd_xfer_set_priv(xfer, data); 3261 usbd_transfer_submit(xfer); 3262 run_start(sc); 3263 3264 break; 3265 3266 default: 3267 RUN_DPRINTF(sc, RUN_DEBUG_XMIT | RUN_DEBUG_USB, 3268 "USB transfer error, %s\n", usbd_errstr(error)); 3269 3270 data = usbd_xfer_get_priv(xfer); 3271 3272 if (data != NULL) { 3273 if(data->ni != NULL) 3274 vap = data->ni->ni_vap; 3275 run_tx_free(pq, data, error); 3276 usbd_xfer_set_priv(xfer, NULL); 3277 } 3278 3279 if (vap == NULL) 3280 vap = TAILQ_FIRST(&ic->ic_vaps); 3281 3282 if (error != USB_ERR_CANCELLED) { 3283 if (error == USB_ERR_TIMEOUT) { 3284 device_printf(sc->sc_dev, "device timeout\n"); 3285 uint32_t i = RUN_CMDQ_GET(&sc->cmdq_store); 3286 RUN_DPRINTF(sc, RUN_DEBUG_XMIT | RUN_DEBUG_USB, 3287 "cmdq_store=%d\n", i); 3288 sc->cmdq[i].func = run_usb_timeout_cb; 3289 sc->cmdq[i].arg0 = vap; 3290 ieee80211_runtask(ic, &sc->cmdq_task); 3291 } 3292 3293 /* 3294 * Try to clear stall first, also if other 3295 * errors occur, hence clearing stall 3296 * introduces a 50 ms delay: 3297 */ 3298 usbd_xfer_set_stall(xfer); 3299 goto tr_setup; 3300 } 3301 break; 3302 } 3303 #ifdef IEEE80211_SUPPORT_SUPERG 3304 /* XXX TODO: make this deferred rather than unlock/relock */ 3305 /* XXX TODO: should only do the QoS AC this belongs to */ 3306 if (pq->tx_nfree >= RUN_TX_RING_COUNT) { 3307 RUN_UNLOCK(sc); 3308 ieee80211_ff_flush_all(ic); 3309 RUN_LOCK(sc); 3310 } 3311 #endif 3312 } 3313 3314 static void 3315 run_bulk_tx_callback0(struct usb_xfer *xfer, usb_error_t error) 3316 { 3317 run_bulk_tx_callbackN(xfer, error, 0); 3318 } 3319 3320 static void 3321 run_bulk_tx_callback1(struct usb_xfer *xfer, usb_error_t error) 3322 { 3323 run_bulk_tx_callbackN(xfer, error, 1); 3324 } 3325 3326 static void 3327 run_bulk_tx_callback2(struct usb_xfer *xfer, usb_error_t error) 3328 { 3329 run_bulk_tx_callbackN(xfer, error, 2); 3330 } 3331 3332 static void 3333 run_bulk_tx_callback3(struct usb_xfer *xfer, usb_error_t error) 3334 { 3335 run_bulk_tx_callbackN(xfer, error, 3); 3336 } 3337 3338 static void 3339 run_bulk_tx_callback4(struct usb_xfer *xfer, usb_error_t error) 3340 { 3341 run_bulk_tx_callbackN(xfer, error, 4); 3342 } 3343 3344 static void 3345 run_bulk_tx_callback5(struct usb_xfer *xfer, usb_error_t error) 3346 { 3347 run_bulk_tx_callbackN(xfer, error, 5); 3348 } 3349 3350 static void 3351 run_set_tx_desc(struct run_softc *sc, struct run_tx_data *data) 3352 { 3353 struct mbuf *m = data->m; 3354 struct ieee80211com *ic = &sc->sc_ic; 3355 struct ieee80211vap *vap = data->ni->ni_vap; 3356 struct ieee80211_frame *wh; 3357 struct rt2870_txd *txd; 3358 struct rt2860_txwi *txwi; 3359 uint16_t xferlen, txwisize; 3360 uint16_t mcs; 3361 uint8_t ridx = data->ridx; 3362 uint8_t pad; 3363 3364 /* get MCS code from rate index */ 3365 mcs = rt2860_rates[ridx].mcs; 3366 3367 txwisize = (sc->mac_ver == 0x5592) ? 3368 sizeof(*txwi) + sizeof(uint32_t) : sizeof(*txwi); 3369 xferlen = txwisize + m->m_pkthdr.len; 3370 3371 /* roundup to 32-bit alignment */ 3372 xferlen = (xferlen + 3) & ~3; 3373 3374 txd = (struct rt2870_txd *)&data->desc; 3375 txd->len = htole16(xferlen); 3376 3377 wh = mtod(m, struct ieee80211_frame *); 3378 3379 /* 3380 * Ether both are true or both are false, the header 3381 * are nicely aligned to 32-bit. So, no L2 padding. 3382 */ 3383 if(IEEE80211_HAS_ADDR4(wh) == IEEE80211_QOS_HAS_SEQ(wh)) 3384 pad = 0; 3385 else 3386 pad = 2; 3387 3388 /* setup TX Wireless Information */ 3389 txwi = (struct rt2860_txwi *)(txd + 1); 3390 txwi->len = htole16(m->m_pkthdr.len - pad); 3391 if (rt2860_rates[ridx].phy == IEEE80211_T_DS) { 3392 mcs |= RT2860_PHY_CCK; 3393 if (ridx != RT2860_RIDX_CCK1 && 3394 (ic->ic_flags & IEEE80211_F_SHPREAMBLE)) 3395 mcs |= RT2860_PHY_SHPRE; 3396 } else if (rt2860_rates[ridx].phy == IEEE80211_T_OFDM) { 3397 mcs |= RT2860_PHY_OFDM; 3398 } else if (rt2860_rates[ridx].phy == IEEE80211_T_HT) { 3399 /* XXX TODO: [adrian] set short preamble for MCS? */ 3400 mcs |= RT2860_PHY_HT_MIX; /* Mixed, not greenfield */ 3401 } 3402 txwi->phy = htole16(mcs); 3403 3404 /* check if RTS/CTS or CTS-to-self protection is required */ 3405 if (!IEEE80211_IS_MULTICAST(wh->i_addr1) && 3406 ((m->m_pkthdr.len + IEEE80211_CRC_LEN > vap->iv_rtsthreshold) || 3407 ((ic->ic_flags & IEEE80211_F_USEPROT) && 3408 rt2860_rates[ridx].phy == IEEE80211_T_OFDM) || 3409 ((ic->ic_htprotmode == IEEE80211_PROT_RTSCTS) && 3410 rt2860_rates[ridx].phy == IEEE80211_T_HT))) 3411 txwi->txop |= RT2860_TX_TXOP_HT; 3412 else 3413 txwi->txop |= RT2860_TX_TXOP_BACKOFF; 3414 3415 if (vap->iv_opmode != IEEE80211_M_STA && !IEEE80211_QOS_HAS_SEQ(wh)) 3416 txwi->xflags |= RT2860_TX_NSEQ; 3417 } 3418 3419 /* This function must be called locked */ 3420 static int 3421 run_tx(struct run_softc *sc, struct mbuf *m, struct ieee80211_node *ni) 3422 { 3423 struct ieee80211com *ic = &sc->sc_ic; 3424 struct ieee80211vap *vap = ni->ni_vap; 3425 struct ieee80211_frame *wh; 3426 const struct ieee80211_txparam *tp = ni->ni_txparms; 3427 struct run_node *rn = RUN_NODE(ni); 3428 struct run_tx_data *data; 3429 struct rt2870_txd *txd; 3430 struct rt2860_txwi *txwi; 3431 uint16_t qos; 3432 uint16_t dur; 3433 uint16_t qid; 3434 uint8_t type; 3435 uint8_t tid; 3436 uint8_t ridx; 3437 uint8_t ctl_ridx; 3438 uint8_t qflags; 3439 uint8_t xflags = 0; 3440 int hasqos; 3441 3442 RUN_LOCK_ASSERT(sc, MA_OWNED); 3443 3444 wh = mtod(m, struct ieee80211_frame *); 3445 3446 type = wh->i_fc[0] & IEEE80211_FC0_TYPE_MASK; 3447 3448 /* 3449 * There are 7 bulk endpoints: 1 for RX 3450 * and 6 for TX (4 EDCAs + HCCA + Prio). 3451 * Update 03-14-2009: some devices like the Planex GW-US300MiniS 3452 * seem to have only 4 TX bulk endpoints (Fukaumi Naoki). 3453 */ 3454 if ((hasqos = IEEE80211_QOS_HAS_SEQ(wh))) { 3455 uint8_t *frm; 3456 3457 frm = ieee80211_getqos(wh); 3458 qos = le16toh(*(const uint16_t *)frm); 3459 tid = qos & IEEE80211_QOS_TID; 3460 qid = TID_TO_WME_AC(tid); 3461 } else { 3462 qos = 0; 3463 tid = 0; 3464 qid = WME_AC_BE; 3465 } 3466 qflags = (qid < 4) ? RT2860_TX_QSEL_EDCA : RT2860_TX_QSEL_HCCA; 3467 3468 RUN_DPRINTF(sc, RUN_DEBUG_XMIT, "qos %d\tqid %d\ttid %d\tqflags %x\n", 3469 qos, qid, tid, qflags); 3470 3471 /* pickup a rate index */ 3472 if (IEEE80211_IS_MULTICAST(wh->i_addr1) || 3473 type != IEEE80211_FC0_TYPE_DATA || m->m_flags & M_EAPOL) { 3474 /* XXX TODO: methodize for 11n; use MCS0 for 11NA/11NG */ 3475 ridx = (ic->ic_curmode == IEEE80211_MODE_11A || ic->ic_curmode == IEEE80211_MODE_11NA) ? 3476 RT2860_RIDX_OFDM6 : RT2860_RIDX_CCK1; 3477 ctl_ridx = rt2860_rates[ridx].ctl_ridx; 3478 } else { 3479 if (tp->ucastrate != IEEE80211_FIXED_RATE_NONE) 3480 ridx = rn->fix_ridx; 3481 else 3482 ridx = rn->amrr_ridx; 3483 ctl_ridx = rt2860_rates[ridx].ctl_ridx; 3484 } 3485 3486 if (!IEEE80211_IS_MULTICAST(wh->i_addr1) && 3487 (!hasqos || (qos & IEEE80211_QOS_ACKPOLICY) != 3488 IEEE80211_QOS_ACKPOLICY_NOACK)) { 3489 xflags |= RT2860_TX_ACK; 3490 if (ic->ic_flags & IEEE80211_F_SHPREAMBLE) 3491 dur = rt2860_rates[ctl_ridx].sp_ack_dur; 3492 else 3493 dur = rt2860_rates[ctl_ridx].lp_ack_dur; 3494 USETW(wh->i_dur, dur); 3495 } 3496 3497 /* reserve slots for mgmt packets, just in case */ 3498 if (sc->sc_epq[qid].tx_nfree < 3) { 3499 RUN_DPRINTF(sc, RUN_DEBUG_XMIT, "tx ring %d is full\n", qid); 3500 return (-1); 3501 } 3502 3503 data = STAILQ_FIRST(&sc->sc_epq[qid].tx_fh); 3504 STAILQ_REMOVE_HEAD(&sc->sc_epq[qid].tx_fh, next); 3505 sc->sc_epq[qid].tx_nfree--; 3506 3507 txd = (struct rt2870_txd *)&data->desc; 3508 txd->flags = qflags; 3509 txwi = (struct rt2860_txwi *)(txd + 1); 3510 txwi->xflags = xflags; 3511 if (IEEE80211_IS_MULTICAST(wh->i_addr1)) 3512 txwi->wcid = 0; 3513 else 3514 txwi->wcid = (vap->iv_opmode == IEEE80211_M_STA) ? 3515 1 : RUN_AID2WCID(ni->ni_associd); 3516 3517 /* clear leftover garbage bits */ 3518 txwi->flags = 0; 3519 txwi->txop = 0; 3520 3521 data->m = m; 3522 data->ni = ni; 3523 data->ridx = ridx; 3524 3525 run_set_tx_desc(sc, data); 3526 3527 /* 3528 * The chip keeps track of 2 kind of Tx stats, 3529 * * TX_STAT_FIFO, for per WCID stats, and 3530 * * TX_STA_CNT0 for all-TX-in-one stats. 3531 * 3532 * To use FIFO stats, we need to store MCS into the driver-private 3533 * PacketID field. So that, we can tell whose stats when we read them. 3534 * We add 1 to the MCS because setting the PacketID field to 0 means 3535 * that we don't want feedback in TX_STAT_FIFO. 3536 * And, that's what we want for STA mode, since TX_STA_CNT0 does the job. 3537 * 3538 * FIFO stats doesn't count Tx with WCID 0xff, so we do this in run_tx(). 3539 */ 3540 if (sc->rvp_cnt > 1 || vap->iv_opmode == IEEE80211_M_HOSTAP || 3541 vap->iv_opmode == IEEE80211_M_MBSS) { 3542 uint16_t pid = (rt2860_rates[ridx].mcs + 1) & 0xf; 3543 txwi->len |= htole16(pid << RT2860_TX_PID_SHIFT); 3544 3545 /* 3546 * Unlike PCI based devices, we don't get any interrupt from 3547 * USB devices, so we simulate FIFO-is-full interrupt here. 3548 * Ralink recommends to drain FIFO stats every 100 ms, but 16 slots 3549 * quickly get fulled. To prevent overflow, increment a counter on 3550 * every FIFO stat request, so we know how many slots are left. 3551 * We do this only in HOSTAP or multiple vap mode since FIFO stats 3552 * are used only in those modes. 3553 * We just drain stats. AMRR gets updated every 1 sec by 3554 * run_ratectl_cb() via callout. 3555 * Call it early. Otherwise overflow. 3556 */ 3557 if (sc->fifo_cnt++ == 10) { 3558 /* 3559 * With multiple vaps or if_bridge, if_start() is called 3560 * with a non-sleepable lock, tcpinp. So, need to defer. 3561 */ 3562 uint32_t i = RUN_CMDQ_GET(&sc->cmdq_store); 3563 RUN_DPRINTF(sc, RUN_DEBUG_XMIT, "cmdq_store=%d\n", i); 3564 sc->cmdq[i].func = run_drain_fifo; 3565 sc->cmdq[i].arg0 = sc; 3566 ieee80211_runtask(ic, &sc->cmdq_task); 3567 } 3568 } 3569 3570 STAILQ_INSERT_TAIL(&sc->sc_epq[qid].tx_qh, data, next); 3571 3572 usbd_transfer_start(sc->sc_xfer[qid]); 3573 3574 RUN_DPRINTF(sc, RUN_DEBUG_XMIT, 3575 "sending data frame len=%d rate=%d qid=%d\n", 3576 m->m_pkthdr.len + (int)(sizeof(struct rt2870_txd) + 3577 sizeof(struct rt2860_txwi)), rt2860_rates[ridx].rate, qid); 3578 3579 return (0); 3580 } 3581 3582 static int 3583 run_tx_mgt(struct run_softc *sc, struct mbuf *m, struct ieee80211_node *ni) 3584 { 3585 struct ieee80211com *ic = &sc->sc_ic; 3586 struct run_node *rn = RUN_NODE(ni); 3587 struct run_tx_data *data; 3588 struct ieee80211_frame *wh; 3589 struct rt2870_txd *txd; 3590 struct rt2860_txwi *txwi; 3591 uint16_t dur; 3592 uint8_t ridx = rn->mgt_ridx; 3593 uint8_t xflags = 0; 3594 uint8_t wflags = 0; 3595 3596 RUN_LOCK_ASSERT(sc, MA_OWNED); 3597 3598 wh = mtod(m, struct ieee80211_frame *); 3599 3600 /* tell hardware to add timestamp for probe responses */ 3601 if ((wh->i_fc[0] & 3602 (IEEE80211_FC0_TYPE_MASK | IEEE80211_FC0_SUBTYPE_MASK)) == 3603 (IEEE80211_FC0_TYPE_MGT | IEEE80211_FC0_SUBTYPE_PROBE_RESP)) 3604 wflags |= RT2860_TX_TS; 3605 else if (!IEEE80211_IS_MULTICAST(wh->i_addr1)) { 3606 xflags |= RT2860_TX_ACK; 3607 3608 dur = ieee80211_ack_duration(ic->ic_rt, rt2860_rates[ridx].rate, 3609 ic->ic_flags & IEEE80211_F_SHPREAMBLE); 3610 USETW(wh->i_dur, dur); 3611 } 3612 3613 if (sc->sc_epq[0].tx_nfree == 0) 3614 /* let caller free mbuf */ 3615 return (EIO); 3616 data = STAILQ_FIRST(&sc->sc_epq[0].tx_fh); 3617 STAILQ_REMOVE_HEAD(&sc->sc_epq[0].tx_fh, next); 3618 sc->sc_epq[0].tx_nfree--; 3619 3620 txd = (struct rt2870_txd *)&data->desc; 3621 txd->flags = RT2860_TX_QSEL_EDCA; 3622 txwi = (struct rt2860_txwi *)(txd + 1); 3623 txwi->wcid = 0xff; 3624 txwi->flags = wflags; 3625 txwi->xflags = xflags; 3626 txwi->txop = 0; /* clear leftover garbage bits */ 3627 3628 data->m = m; 3629 data->ni = ni; 3630 data->ridx = ridx; 3631 3632 run_set_tx_desc(sc, data); 3633 3634 RUN_DPRINTF(sc, RUN_DEBUG_XMIT, "sending mgt frame len=%d rate=%d\n", 3635 m->m_pkthdr.len + (int)(sizeof(struct rt2870_txd) + 3636 sizeof(struct rt2860_txwi)), rt2860_rates[ridx].rate); 3637 3638 STAILQ_INSERT_TAIL(&sc->sc_epq[0].tx_qh, data, next); 3639 3640 usbd_transfer_start(sc->sc_xfer[0]); 3641 3642 return (0); 3643 } 3644 3645 static int 3646 run_sendprot(struct run_softc *sc, 3647 const struct mbuf *m, struct ieee80211_node *ni, int prot, int rate) 3648 { 3649 struct ieee80211com *ic = ni->ni_ic; 3650 struct run_tx_data *data; 3651 struct rt2870_txd *txd; 3652 struct rt2860_txwi *txwi; 3653 struct mbuf *mprot; 3654 int ridx; 3655 int protrate; 3656 uint8_t wflags = 0; 3657 uint8_t xflags = 0; 3658 3659 RUN_LOCK_ASSERT(sc, MA_OWNED); 3660 3661 /* check that there are free slots before allocating the mbuf */ 3662 if (sc->sc_epq[0].tx_nfree == 0) 3663 /* let caller free mbuf */ 3664 return (ENOBUFS); 3665 3666 mprot = ieee80211_alloc_prot(ni, m, rate, prot); 3667 if (mprot == NULL) { 3668 if_inc_counter(ni->ni_vap->iv_ifp, IFCOUNTER_OERRORS, 1); 3669 RUN_DPRINTF(sc, RUN_DEBUG_XMIT, "could not allocate mbuf\n"); 3670 return (ENOBUFS); 3671 } 3672 3673 protrate = ieee80211_ctl_rate(ic->ic_rt, rate); 3674 wflags = RT2860_TX_FRAG; 3675 xflags = 0; 3676 if (prot == IEEE80211_PROT_RTSCTS) 3677 xflags |= RT2860_TX_ACK; 3678 3679 data = STAILQ_FIRST(&sc->sc_epq[0].tx_fh); 3680 STAILQ_REMOVE_HEAD(&sc->sc_epq[0].tx_fh, next); 3681 sc->sc_epq[0].tx_nfree--; 3682 3683 txd = (struct rt2870_txd *)&data->desc; 3684 txd->flags = RT2860_TX_QSEL_EDCA; 3685 txwi = (struct rt2860_txwi *)(txd + 1); 3686 txwi->wcid = 0xff; 3687 txwi->flags = wflags; 3688 txwi->xflags = xflags; 3689 txwi->txop = 0; /* clear leftover garbage bits */ 3690 3691 data->m = mprot; 3692 data->ni = ieee80211_ref_node(ni); 3693 3694 /* XXX TODO: methodize with MCS rates */ 3695 for (ridx = 0; ridx < RT2860_RIDX_MAX; ridx++) 3696 if (rt2860_rates[ridx].rate == protrate) 3697 break; 3698 data->ridx = ridx; 3699 3700 run_set_tx_desc(sc, data); 3701 3702 RUN_DPRINTF(sc, RUN_DEBUG_XMIT, "sending prot len=%u rate=%u\n", 3703 m->m_pkthdr.len, rate); 3704 3705 STAILQ_INSERT_TAIL(&sc->sc_epq[0].tx_qh, data, next); 3706 3707 usbd_transfer_start(sc->sc_xfer[0]); 3708 3709 return (0); 3710 } 3711 3712 static int 3713 run_tx_param(struct run_softc *sc, struct mbuf *m, struct ieee80211_node *ni, 3714 const struct ieee80211_bpf_params *params) 3715 { 3716 struct ieee80211com *ic = ni->ni_ic; 3717 struct run_tx_data *data; 3718 struct rt2870_txd *txd; 3719 struct rt2860_txwi *txwi; 3720 uint8_t ridx; 3721 uint8_t rate; 3722 uint8_t opflags = 0; 3723 uint8_t xflags = 0; 3724 int error; 3725 3726 RUN_LOCK_ASSERT(sc, MA_OWNED); 3727 3728 KASSERT(params != NULL, ("no raw xmit params")); 3729 3730 rate = params->ibp_rate0; 3731 if (!ieee80211_isratevalid(ic->ic_rt, rate)) { 3732 /* let caller free mbuf */ 3733 return (EINVAL); 3734 } 3735 3736 if ((params->ibp_flags & IEEE80211_BPF_NOACK) == 0) 3737 xflags |= RT2860_TX_ACK; 3738 if (params->ibp_flags & (IEEE80211_BPF_RTS|IEEE80211_BPF_CTS)) { 3739 error = run_sendprot(sc, m, ni, 3740 params->ibp_flags & IEEE80211_BPF_RTS ? 3741 IEEE80211_PROT_RTSCTS : IEEE80211_PROT_CTSONLY, 3742 rate); 3743 if (error) { 3744 /* let caller free mbuf */ 3745 return error; 3746 } 3747 opflags |= /*XXX RT2573_TX_LONG_RETRY |*/ RT2860_TX_TXOP_SIFS; 3748 } 3749 3750 if (sc->sc_epq[0].tx_nfree == 0) { 3751 /* let caller free mbuf */ 3752 RUN_DPRINTF(sc, RUN_DEBUG_XMIT, 3753 "sending raw frame, but tx ring is full\n"); 3754 return (EIO); 3755 } 3756 data = STAILQ_FIRST(&sc->sc_epq[0].tx_fh); 3757 STAILQ_REMOVE_HEAD(&sc->sc_epq[0].tx_fh, next); 3758 sc->sc_epq[0].tx_nfree--; 3759 3760 txd = (struct rt2870_txd *)&data->desc; 3761 txd->flags = RT2860_TX_QSEL_EDCA; 3762 txwi = (struct rt2860_txwi *)(txd + 1); 3763 txwi->wcid = 0xff; 3764 txwi->xflags = xflags; 3765 txwi->txop = opflags; 3766 txwi->flags = 0; /* clear leftover garbage bits */ 3767 3768 data->m = m; 3769 data->ni = ni; 3770 /* XXX TODO: methodize with MCS rates */ 3771 for (ridx = 0; ridx < RT2860_RIDX_MAX; ridx++) 3772 if (rt2860_rates[ridx].rate == rate) 3773 break; 3774 data->ridx = ridx; 3775 3776 run_set_tx_desc(sc, data); 3777 3778 RUN_DPRINTF(sc, RUN_DEBUG_XMIT, "sending raw frame len=%u rate=%u\n", 3779 m->m_pkthdr.len, rate); 3780 3781 STAILQ_INSERT_TAIL(&sc->sc_epq[0].tx_qh, data, next); 3782 3783 usbd_transfer_start(sc->sc_xfer[0]); 3784 3785 return (0); 3786 } 3787 3788 static int 3789 run_raw_xmit(struct ieee80211_node *ni, struct mbuf *m, 3790 const struct ieee80211_bpf_params *params) 3791 { 3792 struct run_softc *sc = ni->ni_ic->ic_softc; 3793 int error = 0; 3794 3795 RUN_LOCK(sc); 3796 3797 /* prevent management frames from being sent if we're not ready */ 3798 if (!(sc->sc_flags & RUN_RUNNING)) { 3799 error = ENETDOWN; 3800 goto done; 3801 } 3802 3803 if (params == NULL) { 3804 /* tx mgt packet */ 3805 if ((error = run_tx_mgt(sc, m, ni)) != 0) { 3806 RUN_DPRINTF(sc, RUN_DEBUG_XMIT, "mgt tx failed\n"); 3807 goto done; 3808 } 3809 } else { 3810 /* tx raw packet with param */ 3811 if ((error = run_tx_param(sc, m, ni, params)) != 0) { 3812 RUN_DPRINTF(sc, RUN_DEBUG_XMIT, "tx with param failed\n"); 3813 goto done; 3814 } 3815 } 3816 3817 done: 3818 RUN_UNLOCK(sc); 3819 3820 if (error != 0) { 3821 if(m != NULL) 3822 m_freem(m); 3823 } 3824 3825 return (error); 3826 } 3827 3828 static int 3829 run_transmit(struct ieee80211com *ic, struct mbuf *m) 3830 { 3831 struct run_softc *sc = ic->ic_softc; 3832 int error; 3833 3834 RUN_LOCK(sc); 3835 if ((sc->sc_flags & RUN_RUNNING) == 0) { 3836 RUN_UNLOCK(sc); 3837 return (ENXIO); 3838 } 3839 error = mbufq_enqueue(&sc->sc_snd, m); 3840 if (error) { 3841 RUN_UNLOCK(sc); 3842 return (error); 3843 } 3844 run_start(sc); 3845 RUN_UNLOCK(sc); 3846 3847 return (0); 3848 } 3849 3850 static void 3851 run_start(struct run_softc *sc) 3852 { 3853 struct ieee80211_node *ni; 3854 struct mbuf *m; 3855 3856 RUN_LOCK_ASSERT(sc, MA_OWNED); 3857 3858 if ((sc->sc_flags & RUN_RUNNING) == 0) 3859 return; 3860 3861 while ((m = mbufq_dequeue(&sc->sc_snd)) != NULL) { 3862 ni = (struct ieee80211_node *)m->m_pkthdr.rcvif; 3863 if (run_tx(sc, m, ni) != 0) { 3864 mbufq_prepend(&sc->sc_snd, m); 3865 break; 3866 } 3867 } 3868 } 3869 3870 static void 3871 run_parent(struct ieee80211com *ic) 3872 { 3873 struct run_softc *sc = ic->ic_softc; 3874 int startall = 0; 3875 3876 RUN_LOCK(sc); 3877 if (sc->sc_detached) { 3878 RUN_UNLOCK(sc); 3879 return; 3880 } 3881 3882 if (ic->ic_nrunning > 0) { 3883 if (!(sc->sc_flags & RUN_RUNNING)) { 3884 startall = 1; 3885 run_init_locked(sc); 3886 } else 3887 run_update_promisc_locked(sc); 3888 } else if ((sc->sc_flags & RUN_RUNNING) && sc->rvp_cnt <= 1) 3889 run_stop(sc); 3890 RUN_UNLOCK(sc); 3891 if (startall) 3892 ieee80211_start_all(ic); 3893 } 3894 3895 static void 3896 run_iq_calib(struct run_softc *sc, u_int chan) 3897 { 3898 uint16_t val; 3899 3900 /* Tx0 IQ gain. */ 3901 run_bbp_write(sc, 158, 0x2c); 3902 if (chan <= 14) 3903 run_efuse_read(sc, RT5390_EEPROM_IQ_GAIN_CAL_TX0_2GHZ, &val, 1); 3904 else if (chan <= 64) { 3905 run_efuse_read(sc, 3906 RT5390_EEPROM_IQ_GAIN_CAL_TX0_CH36_TO_CH64_5GHZ, 3907 &val, 1); 3908 } else if (chan <= 138) { 3909 run_efuse_read(sc, 3910 RT5390_EEPROM_IQ_GAIN_CAL_TX0_CH100_TO_CH138_5GHZ, 3911 &val, 1); 3912 } else if (chan <= 165) { 3913 run_efuse_read(sc, 3914 RT5390_EEPROM_IQ_GAIN_CAL_TX0_CH140_TO_CH165_5GHZ, 3915 &val, 1); 3916 } else 3917 val = 0; 3918 run_bbp_write(sc, 159, val); 3919 3920 /* Tx0 IQ phase. */ 3921 run_bbp_write(sc, 158, 0x2d); 3922 if (chan <= 14) { 3923 run_efuse_read(sc, RT5390_EEPROM_IQ_PHASE_CAL_TX0_2GHZ, 3924 &val, 1); 3925 } else if (chan <= 64) { 3926 run_efuse_read(sc, 3927 RT5390_EEPROM_IQ_PHASE_CAL_TX0_CH36_TO_CH64_5GHZ, 3928 &val, 1); 3929 } else if (chan <= 138) { 3930 run_efuse_read(sc, 3931 RT5390_EEPROM_IQ_PHASE_CAL_TX0_CH100_TO_CH138_5GHZ, 3932 &val, 1); 3933 } else if (chan <= 165) { 3934 run_efuse_read(sc, 3935 RT5390_EEPROM_IQ_PHASE_CAL_TX0_CH140_TO_CH165_5GHZ, 3936 &val, 1); 3937 } else 3938 val = 0; 3939 run_bbp_write(sc, 159, val); 3940 3941 /* Tx1 IQ gain. */ 3942 run_bbp_write(sc, 158, 0x4a); 3943 if (chan <= 14) { 3944 run_efuse_read(sc, RT5390_EEPROM_IQ_GAIN_CAL_TX1_2GHZ, 3945 &val, 1); 3946 } else if (chan <= 64) { 3947 run_efuse_read(sc, 3948 RT5390_EEPROM_IQ_GAIN_CAL_TX1_CH36_TO_CH64_5GHZ, 3949 &val, 1); 3950 } else if (chan <= 138) { 3951 run_efuse_read(sc, 3952 RT5390_EEPROM_IQ_GAIN_CAL_TX1_CH100_TO_CH138_5GHZ, 3953 &val, 1); 3954 } else if (chan <= 165) { 3955 run_efuse_read(sc, 3956 RT5390_EEPROM_IQ_GAIN_CAL_TX1_CH140_TO_CH165_5GHZ, 3957 &val, 1); 3958 } else 3959 val = 0; 3960 run_bbp_write(sc, 159, val); 3961 3962 /* Tx1 IQ phase. */ 3963 run_bbp_write(sc, 158, 0x4b); 3964 if (chan <= 14) { 3965 run_efuse_read(sc, RT5390_EEPROM_IQ_PHASE_CAL_TX1_2GHZ, 3966 &val, 1); 3967 } else if (chan <= 64) { 3968 run_efuse_read(sc, 3969 RT5390_EEPROM_IQ_PHASE_CAL_TX1_CH36_TO_CH64_5GHZ, 3970 &val, 1); 3971 } else if (chan <= 138) { 3972 run_efuse_read(sc, 3973 RT5390_EEPROM_IQ_PHASE_CAL_TX1_CH100_TO_CH138_5GHZ, 3974 &val, 1); 3975 } else if (chan <= 165) { 3976 run_efuse_read(sc, 3977 RT5390_EEPROM_IQ_PHASE_CAL_TX1_CH140_TO_CH165_5GHZ, 3978 &val, 1); 3979 } else 3980 val = 0; 3981 run_bbp_write(sc, 159, val); 3982 3983 /* RF IQ compensation control. */ 3984 run_bbp_write(sc, 158, 0x04); 3985 run_efuse_read(sc, RT5390_EEPROM_RF_IQ_COMPENSATION_CTL, 3986 &val, 1); 3987 run_bbp_write(sc, 159, val); 3988 3989 /* RF IQ imbalance compensation control. */ 3990 run_bbp_write(sc, 158, 0x03); 3991 run_efuse_read(sc, 3992 RT5390_EEPROM_RF_IQ_IMBALANCE_COMPENSATION_CTL, &val, 1); 3993 run_bbp_write(sc, 159, val); 3994 } 3995 3996 static void 3997 run_set_agc(struct run_softc *sc, uint8_t agc) 3998 { 3999 uint8_t bbp; 4000 4001 if (sc->mac_ver == 0x3572) { 4002 run_bbp_read(sc, 27, &bbp); 4003 bbp &= ~(0x3 << 5); 4004 run_bbp_write(sc, 27, bbp | 0 << 5); /* select Rx0 */ 4005 run_bbp_write(sc, 66, agc); 4006 run_bbp_write(sc, 27, bbp | 1 << 5); /* select Rx1 */ 4007 run_bbp_write(sc, 66, agc); 4008 } else 4009 run_bbp_write(sc, 66, agc); 4010 } 4011 4012 static void 4013 run_select_chan_group(struct run_softc *sc, int group) 4014 { 4015 uint32_t tmp; 4016 uint8_t agc; 4017 4018 run_bbp_write(sc, 62, 0x37 - sc->lna[group]); 4019 run_bbp_write(sc, 63, 0x37 - sc->lna[group]); 4020 run_bbp_write(sc, 64, 0x37 - sc->lna[group]); 4021 if (sc->mac_ver < 0x3572) 4022 run_bbp_write(sc, 86, 0x00); 4023 4024 if (sc->mac_ver == 0x3593) { 4025 run_bbp_write(sc, 77, 0x98); 4026 run_bbp_write(sc, 83, (group == 0) ? 0x8a : 0x9a); 4027 } 4028 4029 if (group == 0) { 4030 if (sc->ext_2ghz_lna) { 4031 if (sc->mac_ver >= 0x5390) 4032 run_bbp_write(sc, 75, 0x52); 4033 else { 4034 run_bbp_write(sc, 82, 0x62); 4035 run_bbp_write(sc, 75, 0x46); 4036 } 4037 } else { 4038 if (sc->mac_ver == 0x5592) { 4039 run_bbp_write(sc, 79, 0x1c); 4040 run_bbp_write(sc, 80, 0x0e); 4041 run_bbp_write(sc, 81, 0x3a); 4042 run_bbp_write(sc, 82, 0x62); 4043 4044 run_bbp_write(sc, 195, 0x80); 4045 run_bbp_write(sc, 196, 0xe0); 4046 run_bbp_write(sc, 195, 0x81); 4047 run_bbp_write(sc, 196, 0x1f); 4048 run_bbp_write(sc, 195, 0x82); 4049 run_bbp_write(sc, 196, 0x38); 4050 run_bbp_write(sc, 195, 0x83); 4051 run_bbp_write(sc, 196, 0x32); 4052 run_bbp_write(sc, 195, 0x85); 4053 run_bbp_write(sc, 196, 0x28); 4054 run_bbp_write(sc, 195, 0x86); 4055 run_bbp_write(sc, 196, 0x19); 4056 } else if (sc->mac_ver >= 0x5390) 4057 run_bbp_write(sc, 75, 0x50); 4058 else { 4059 run_bbp_write(sc, 82, 4060 (sc->mac_ver == 0x3593) ? 0x62 : 0x84); 4061 run_bbp_write(sc, 75, 0x50); 4062 } 4063 } 4064 } else { 4065 if (sc->mac_ver == 0x5592) { 4066 run_bbp_write(sc, 79, 0x18); 4067 run_bbp_write(sc, 80, 0x08); 4068 run_bbp_write(sc, 81, 0x38); 4069 run_bbp_write(sc, 82, 0x92); 4070 4071 run_bbp_write(sc, 195, 0x80); 4072 run_bbp_write(sc, 196, 0xf0); 4073 run_bbp_write(sc, 195, 0x81); 4074 run_bbp_write(sc, 196, 0x1e); 4075 run_bbp_write(sc, 195, 0x82); 4076 run_bbp_write(sc, 196, 0x28); 4077 run_bbp_write(sc, 195, 0x83); 4078 run_bbp_write(sc, 196, 0x20); 4079 run_bbp_write(sc, 195, 0x85); 4080 run_bbp_write(sc, 196, 0x7f); 4081 run_bbp_write(sc, 195, 0x86); 4082 run_bbp_write(sc, 196, 0x7f); 4083 } else if (sc->mac_ver == 0x3572) 4084 run_bbp_write(sc, 82, 0x94); 4085 else 4086 run_bbp_write(sc, 82, 4087 (sc->mac_ver == 0x3593) ? 0x82 : 0xf2); 4088 if (sc->ext_5ghz_lna) 4089 run_bbp_write(sc, 75, 0x46); 4090 else 4091 run_bbp_write(sc, 75, 0x50); 4092 } 4093 4094 run_read(sc, RT2860_TX_BAND_CFG, &tmp); 4095 tmp &= ~(RT2860_5G_BAND_SEL_N | RT2860_5G_BAND_SEL_P); 4096 tmp |= (group == 0) ? RT2860_5G_BAND_SEL_N : RT2860_5G_BAND_SEL_P; 4097 run_write(sc, RT2860_TX_BAND_CFG, tmp); 4098 4099 /* enable appropriate Power Amplifiers and Low Noise Amplifiers */ 4100 tmp = RT2860_RFTR_EN | RT2860_TRSW_EN | RT2860_LNA_PE0_EN; 4101 if (sc->mac_ver == 0x3593) 4102 tmp |= 1 << 29 | 1 << 28; 4103 if (sc->nrxchains > 1) 4104 tmp |= RT2860_LNA_PE1_EN; 4105 if (group == 0) { /* 2GHz */ 4106 tmp |= RT2860_PA_PE_G0_EN; 4107 if (sc->ntxchains > 1) 4108 tmp |= RT2860_PA_PE_G1_EN; 4109 if (sc->mac_ver == 0x3593) { 4110 if (sc->ntxchains > 2) 4111 tmp |= 1 << 25; 4112 } 4113 } else { /* 5GHz */ 4114 tmp |= RT2860_PA_PE_A0_EN; 4115 if (sc->ntxchains > 1) 4116 tmp |= RT2860_PA_PE_A1_EN; 4117 } 4118 if (sc->mac_ver == 0x3572) { 4119 run_rt3070_rf_write(sc, 8, 0x00); 4120 run_write(sc, RT2860_TX_PIN_CFG, tmp); 4121 run_rt3070_rf_write(sc, 8, 0x80); 4122 } else 4123 run_write(sc, RT2860_TX_PIN_CFG, tmp); 4124 4125 if (sc->mac_ver == 0x5592) { 4126 run_bbp_write(sc, 195, 0x8d); 4127 run_bbp_write(sc, 196, 0x1a); 4128 } 4129 4130 if (sc->mac_ver == 0x3593) { 4131 run_read(sc, RT2860_GPIO_CTRL, &tmp); 4132 tmp &= ~0x01010000; 4133 if (group == 0) 4134 tmp |= 0x00010000; 4135 tmp = (tmp & ~0x00009090) | 0x00000090; 4136 run_write(sc, RT2860_GPIO_CTRL, tmp); 4137 } 4138 4139 /* set initial AGC value */ 4140 if (group == 0) { /* 2GHz band */ 4141 if (sc->mac_ver >= 0x3070) 4142 agc = 0x1c + sc->lna[0] * 2; 4143 else 4144 agc = 0x2e + sc->lna[0]; 4145 } else { /* 5GHz band */ 4146 if (sc->mac_ver == 0x5592) 4147 agc = 0x24 + sc->lna[group] * 2; 4148 else if (sc->mac_ver == 0x3572 || sc->mac_ver == 0x3593) 4149 agc = 0x22 + (sc->lna[group] * 5) / 3; 4150 else 4151 agc = 0x32 + (sc->lna[group] * 5) / 3; 4152 } 4153 run_set_agc(sc, agc); 4154 } 4155 4156 static void 4157 run_rt2870_set_chan(struct run_softc *sc, u_int chan) 4158 { 4159 const struct rfprog *rfprog = rt2860_rf2850; 4160 uint32_t r2, r3, r4; 4161 int8_t txpow1, txpow2; 4162 int i; 4163 4164 /* find the settings for this channel (we know it exists) */ 4165 for (i = 0; rfprog[i].chan != chan; i++); 4166 4167 r2 = rfprog[i].r2; 4168 if (sc->ntxchains == 1) 4169 r2 |= 1 << 14; /* 1T: disable Tx chain 2 */ 4170 if (sc->nrxchains == 1) 4171 r2 |= 1 << 17 | 1 << 6; /* 1R: disable Rx chains 2 & 3 */ 4172 else if (sc->nrxchains == 2) 4173 r2 |= 1 << 6; /* 2R: disable Rx chain 3 */ 4174 4175 /* use Tx power values from EEPROM */ 4176 txpow1 = sc->txpow1[i]; 4177 txpow2 = sc->txpow2[i]; 4178 4179 /* Initialize RF R3 and R4. */ 4180 r3 = rfprog[i].r3 & 0xffffc1ff; 4181 r4 = (rfprog[i].r4 & ~(0x001f87c0)) | (sc->freq << 15); 4182 if (chan > 14) { 4183 if (txpow1 >= 0) { 4184 txpow1 = (txpow1 > 0xf) ? (0xf) : (txpow1); 4185 r3 |= (txpow1 << 10) | (1 << 9); 4186 } else { 4187 txpow1 += 7; 4188 4189 /* txpow1 is not possible larger than 15. */ 4190 r3 |= (txpow1 << 10); 4191 } 4192 if (txpow2 >= 0) { 4193 txpow2 = (txpow2 > 0xf) ? (0xf) : (txpow2); 4194 r4 |= (txpow2 << 7) | (1 << 6); 4195 } else { 4196 txpow2 += 7; 4197 r4 |= (txpow2 << 7); 4198 } 4199 } else { 4200 /* Set Tx0 power. */ 4201 r3 |= (txpow1 << 9); 4202 4203 /* Set frequency offset and Tx1 power. */ 4204 r4 |= (txpow2 << 6); 4205 } 4206 4207 run_rt2870_rf_write(sc, rfprog[i].r1); 4208 run_rt2870_rf_write(sc, r2); 4209 run_rt2870_rf_write(sc, r3 & ~(1 << 2)); 4210 run_rt2870_rf_write(sc, r4); 4211 4212 run_delay(sc, 10); 4213 4214 run_rt2870_rf_write(sc, rfprog[i].r1); 4215 run_rt2870_rf_write(sc, r2); 4216 run_rt2870_rf_write(sc, r3 | (1 << 2)); 4217 run_rt2870_rf_write(sc, r4); 4218 4219 run_delay(sc, 10); 4220 4221 run_rt2870_rf_write(sc, rfprog[i].r1); 4222 run_rt2870_rf_write(sc, r2); 4223 run_rt2870_rf_write(sc, r3 & ~(1 << 2)); 4224 run_rt2870_rf_write(sc, r4); 4225 } 4226 4227 static void 4228 run_rt3070_set_chan(struct run_softc *sc, u_int chan) 4229 { 4230 int8_t txpow1, txpow2; 4231 uint8_t rf; 4232 int i; 4233 4234 /* find the settings for this channel (we know it exists) */ 4235 for (i = 0; rt2860_rf2850[i].chan != chan; i++); 4236 4237 /* use Tx power values from EEPROM */ 4238 txpow1 = sc->txpow1[i]; 4239 txpow2 = sc->txpow2[i]; 4240 4241 run_rt3070_rf_write(sc, 2, rt3070_freqs[i].n); 4242 4243 /* RT3370/RT3390: RF R3 [7:4] is not reserved bits. */ 4244 run_rt3070_rf_read(sc, 3, &rf); 4245 rf = (rf & ~0x0f) | rt3070_freqs[i].k; 4246 run_rt3070_rf_write(sc, 3, rf); 4247 4248 run_rt3070_rf_read(sc, 6, &rf); 4249 rf = (rf & ~0x03) | rt3070_freqs[i].r; 4250 run_rt3070_rf_write(sc, 6, rf); 4251 4252 /* set Tx0 power */ 4253 run_rt3070_rf_read(sc, 12, &rf); 4254 rf = (rf & ~0x1f) | txpow1; 4255 run_rt3070_rf_write(sc, 12, rf); 4256 4257 /* set Tx1 power */ 4258 run_rt3070_rf_read(sc, 13, &rf); 4259 rf = (rf & ~0x1f) | txpow2; 4260 run_rt3070_rf_write(sc, 13, rf); 4261 4262 run_rt3070_rf_read(sc, 1, &rf); 4263 rf &= ~0xfc; 4264 if (sc->ntxchains == 1) 4265 rf |= 1 << 7 | 1 << 5; /* 1T: disable Tx chains 2 & 3 */ 4266 else if (sc->ntxchains == 2) 4267 rf |= 1 << 7; /* 2T: disable Tx chain 3 */ 4268 if (sc->nrxchains == 1) 4269 rf |= 1 << 6 | 1 << 4; /* 1R: disable Rx chains 2 & 3 */ 4270 else if (sc->nrxchains == 2) 4271 rf |= 1 << 6; /* 2R: disable Rx chain 3 */ 4272 run_rt3070_rf_write(sc, 1, rf); 4273 4274 /* set RF offset */ 4275 run_rt3070_rf_read(sc, 23, &rf); 4276 rf = (rf & ~0x7f) | sc->freq; 4277 run_rt3070_rf_write(sc, 23, rf); 4278 4279 /* program RF filter */ 4280 run_rt3070_rf_read(sc, 24, &rf); /* Tx */ 4281 rf = (rf & ~0x3f) | sc->rf24_20mhz; 4282 run_rt3070_rf_write(sc, 24, rf); 4283 run_rt3070_rf_read(sc, 31, &rf); /* Rx */ 4284 rf = (rf & ~0x3f) | sc->rf24_20mhz; 4285 run_rt3070_rf_write(sc, 31, rf); 4286 4287 /* enable RF tuning */ 4288 run_rt3070_rf_read(sc, 7, &rf); 4289 run_rt3070_rf_write(sc, 7, rf | 0x01); 4290 } 4291 4292 static void 4293 run_rt3572_set_chan(struct run_softc *sc, u_int chan) 4294 { 4295 int8_t txpow1, txpow2; 4296 uint32_t tmp; 4297 uint8_t rf; 4298 int i; 4299 4300 /* find the settings for this channel (we know it exists) */ 4301 for (i = 0; rt2860_rf2850[i].chan != chan; i++); 4302 4303 /* use Tx power values from EEPROM */ 4304 txpow1 = sc->txpow1[i]; 4305 txpow2 = sc->txpow2[i]; 4306 4307 if (chan <= 14) { 4308 run_bbp_write(sc, 25, sc->bbp25); 4309 run_bbp_write(sc, 26, sc->bbp26); 4310 } else { 4311 /* enable IQ phase correction */ 4312 run_bbp_write(sc, 25, 0x09); 4313 run_bbp_write(sc, 26, 0xff); 4314 } 4315 4316 run_rt3070_rf_write(sc, 2, rt3070_freqs[i].n); 4317 run_rt3070_rf_write(sc, 3, rt3070_freqs[i].k); 4318 run_rt3070_rf_read(sc, 6, &rf); 4319 rf = (rf & ~0x0f) | rt3070_freqs[i].r; 4320 rf |= (chan <= 14) ? 0x08 : 0x04; 4321 run_rt3070_rf_write(sc, 6, rf); 4322 4323 /* set PLL mode */ 4324 run_rt3070_rf_read(sc, 5, &rf); 4325 rf &= ~(0x08 | 0x04); 4326 rf |= (chan <= 14) ? 0x04 : 0x08; 4327 run_rt3070_rf_write(sc, 5, rf); 4328 4329 /* set Tx power for chain 0 */ 4330 if (chan <= 14) 4331 rf = 0x60 | txpow1; 4332 else 4333 rf = 0xe0 | (txpow1 & 0xc) << 1 | (txpow1 & 0x3); 4334 run_rt3070_rf_write(sc, 12, rf); 4335 4336 /* set Tx power for chain 1 */ 4337 if (chan <= 14) 4338 rf = 0x60 | txpow2; 4339 else 4340 rf = 0xe0 | (txpow2 & 0xc) << 1 | (txpow2 & 0x3); 4341 run_rt3070_rf_write(sc, 13, rf); 4342 4343 /* set Tx/Rx streams */ 4344 run_rt3070_rf_read(sc, 1, &rf); 4345 rf &= ~0xfc; 4346 if (sc->ntxchains == 1) 4347 rf |= 1 << 7 | 1 << 5; /* 1T: disable Tx chains 2 & 3 */ 4348 else if (sc->ntxchains == 2) 4349 rf |= 1 << 7; /* 2T: disable Tx chain 3 */ 4350 if (sc->nrxchains == 1) 4351 rf |= 1 << 6 | 1 << 4; /* 1R: disable Rx chains 2 & 3 */ 4352 else if (sc->nrxchains == 2) 4353 rf |= 1 << 6; /* 2R: disable Rx chain 3 */ 4354 run_rt3070_rf_write(sc, 1, rf); 4355 4356 /* set RF offset */ 4357 run_rt3070_rf_read(sc, 23, &rf); 4358 rf = (rf & ~0x7f) | sc->freq; 4359 run_rt3070_rf_write(sc, 23, rf); 4360 4361 /* program RF filter */ 4362 rf = sc->rf24_20mhz; 4363 run_rt3070_rf_write(sc, 24, rf); /* Tx */ 4364 run_rt3070_rf_write(sc, 31, rf); /* Rx */ 4365 4366 /* enable RF tuning */ 4367 run_rt3070_rf_read(sc, 7, &rf); 4368 rf = (chan <= 14) ? 0xd8 : ((rf & ~0xc8) | 0x14); 4369 run_rt3070_rf_write(sc, 7, rf); 4370 4371 /* TSSI */ 4372 rf = (chan <= 14) ? 0xc3 : 0xc0; 4373 run_rt3070_rf_write(sc, 9, rf); 4374 4375 /* set loop filter 1 */ 4376 run_rt3070_rf_write(sc, 10, 0xf1); 4377 /* set loop filter 2 */ 4378 run_rt3070_rf_write(sc, 11, (chan <= 14) ? 0xb9 : 0x00); 4379 4380 /* set tx_mx2_ic */ 4381 run_rt3070_rf_write(sc, 15, (chan <= 14) ? 0x53 : 0x43); 4382 /* set tx_mx1_ic */ 4383 if (chan <= 14) 4384 rf = 0x48 | sc->txmixgain_2ghz; 4385 else 4386 rf = 0x78 | sc->txmixgain_5ghz; 4387 run_rt3070_rf_write(sc, 16, rf); 4388 4389 /* set tx_lo1 */ 4390 run_rt3070_rf_write(sc, 17, 0x23); 4391 /* set tx_lo2 */ 4392 if (chan <= 14) 4393 rf = 0x93; 4394 else if (chan <= 64) 4395 rf = 0xb7; 4396 else if (chan <= 128) 4397 rf = 0x74; 4398 else 4399 rf = 0x72; 4400 run_rt3070_rf_write(sc, 19, rf); 4401 4402 /* set rx_lo1 */ 4403 if (chan <= 14) 4404 rf = 0xb3; 4405 else if (chan <= 64) 4406 rf = 0xf6; 4407 else if (chan <= 128) 4408 rf = 0xf4; 4409 else 4410 rf = 0xf3; 4411 run_rt3070_rf_write(sc, 20, rf); 4412 4413 /* set pfd_delay */ 4414 if (chan <= 14) 4415 rf = 0x15; 4416 else if (chan <= 64) 4417 rf = 0x3d; 4418 else 4419 rf = 0x01; 4420 run_rt3070_rf_write(sc, 25, rf); 4421 4422 /* set rx_lo2 */ 4423 run_rt3070_rf_write(sc, 26, (chan <= 14) ? 0x85 : 0x87); 4424 /* set ldo_rf_vc */ 4425 run_rt3070_rf_write(sc, 27, (chan <= 14) ? 0x00 : 0x01); 4426 /* set drv_cc */ 4427 run_rt3070_rf_write(sc, 29, (chan <= 14) ? 0x9b : 0x9f); 4428 4429 run_read(sc, RT2860_GPIO_CTRL, &tmp); 4430 tmp &= ~0x8080; 4431 if (chan <= 14) 4432 tmp |= 0x80; 4433 run_write(sc, RT2860_GPIO_CTRL, tmp); 4434 4435 /* enable RF tuning */ 4436 run_rt3070_rf_read(sc, 7, &rf); 4437 run_rt3070_rf_write(sc, 7, rf | 0x01); 4438 4439 run_delay(sc, 2); 4440 } 4441 4442 static void 4443 run_rt3593_set_chan(struct run_softc *sc, u_int chan) 4444 { 4445 int8_t txpow1, txpow2, txpow3; 4446 uint8_t h20mhz, rf; 4447 int i; 4448 4449 /* find the settings for this channel (we know it exists) */ 4450 for (i = 0; rt2860_rf2850[i].chan != chan; i++); 4451 4452 /* use Tx power values from EEPROM */ 4453 txpow1 = sc->txpow1[i]; 4454 txpow2 = sc->txpow2[i]; 4455 txpow3 = (sc->ntxchains == 3) ? sc->txpow3[i] : 0; 4456 4457 if (chan <= 14) { 4458 run_bbp_write(sc, 25, sc->bbp25); 4459 run_bbp_write(sc, 26, sc->bbp26); 4460 } else { 4461 /* Enable IQ phase correction. */ 4462 run_bbp_write(sc, 25, 0x09); 4463 run_bbp_write(sc, 26, 0xff); 4464 } 4465 4466 run_rt3070_rf_write(sc, 8, rt3070_freqs[i].n); 4467 run_rt3070_rf_write(sc, 9, rt3070_freqs[i].k & 0x0f); 4468 run_rt3070_rf_read(sc, 11, &rf); 4469 rf = (rf & ~0x03) | (rt3070_freqs[i].r & 0x03); 4470 run_rt3070_rf_write(sc, 11, rf); 4471 4472 /* Set pll_idoh. */ 4473 run_rt3070_rf_read(sc, 11, &rf); 4474 rf &= ~0x4c; 4475 rf |= (chan <= 14) ? 0x44 : 0x48; 4476 run_rt3070_rf_write(sc, 11, rf); 4477 4478 if (chan <= 14) 4479 rf = txpow1 & 0x1f; 4480 else 4481 rf = 0x40 | ((txpow1 & 0x18) << 1) | (txpow1 & 0x07); 4482 run_rt3070_rf_write(sc, 53, rf); 4483 4484 if (chan <= 14) 4485 rf = txpow2 & 0x1f; 4486 else 4487 rf = 0x40 | ((txpow2 & 0x18) << 1) | (txpow2 & 0x07); 4488 run_rt3070_rf_write(sc, 55, rf); 4489 4490 if (chan <= 14) 4491 rf = txpow3 & 0x1f; 4492 else 4493 rf = 0x40 | ((txpow3 & 0x18) << 1) | (txpow3 & 0x07); 4494 run_rt3070_rf_write(sc, 54, rf); 4495 4496 rf = RT3070_RF_BLOCK | RT3070_PLL_PD; 4497 if (sc->ntxchains == 3) 4498 rf |= RT3070_TX0_PD | RT3070_TX1_PD | RT3070_TX2_PD; 4499 else 4500 rf |= RT3070_TX0_PD | RT3070_TX1_PD; 4501 rf |= RT3070_RX0_PD | RT3070_RX1_PD | RT3070_RX2_PD; 4502 run_rt3070_rf_write(sc, 1, rf); 4503 4504 run_adjust_freq_offset(sc); 4505 4506 run_rt3070_rf_write(sc, 31, (chan <= 14) ? 0xa0 : 0x80); 4507 4508 h20mhz = (sc->rf24_20mhz & 0x20) >> 5; 4509 run_rt3070_rf_read(sc, 30, &rf); 4510 rf = (rf & ~0x06) | (h20mhz << 1) | (h20mhz << 2); 4511 run_rt3070_rf_write(sc, 30, rf); 4512 4513 run_rt3070_rf_read(sc, 36, &rf); 4514 if (chan <= 14) 4515 rf |= 0x80; 4516 else 4517 rf &= ~0x80; 4518 run_rt3070_rf_write(sc, 36, rf); 4519 4520 /* Set vcolo_bs. */ 4521 run_rt3070_rf_write(sc, 34, (chan <= 14) ? 0x3c : 0x20); 4522 /* Set pfd_delay. */ 4523 run_rt3070_rf_write(sc, 12, (chan <= 14) ? 0x1a : 0x12); 4524 4525 /* Set vco bias current control. */ 4526 run_rt3070_rf_read(sc, 6, &rf); 4527 rf &= ~0xc0; 4528 if (chan <= 14) 4529 rf |= 0x40; 4530 else if (chan <= 128) 4531 rf |= 0x80; 4532 else 4533 rf |= 0x40; 4534 run_rt3070_rf_write(sc, 6, rf); 4535 4536 run_rt3070_rf_read(sc, 30, &rf); 4537 rf = (rf & ~0x18) | 0x10; 4538 run_rt3070_rf_write(sc, 30, rf); 4539 4540 run_rt3070_rf_write(sc, 10, (chan <= 14) ? 0xd3 : 0xd8); 4541 run_rt3070_rf_write(sc, 13, (chan <= 14) ? 0x12 : 0x23); 4542 4543 run_rt3070_rf_read(sc, 51, &rf); 4544 rf = (rf & ~0x03) | 0x01; 4545 run_rt3070_rf_write(sc, 51, rf); 4546 /* Set tx_mx1_cc. */ 4547 run_rt3070_rf_read(sc, 51, &rf); 4548 rf &= ~0x1c; 4549 rf |= (chan <= 14) ? 0x14 : 0x10; 4550 run_rt3070_rf_write(sc, 51, rf); 4551 /* Set tx_mx1_ic. */ 4552 run_rt3070_rf_read(sc, 51, &rf); 4553 rf &= ~0xe0; 4554 rf |= (chan <= 14) ? 0x60 : 0x40; 4555 run_rt3070_rf_write(sc, 51, rf); 4556 /* Set tx_lo1_ic. */ 4557 run_rt3070_rf_read(sc, 49, &rf); 4558 rf &= ~0x1c; 4559 rf |= (chan <= 14) ? 0x0c : 0x08; 4560 run_rt3070_rf_write(sc, 49, rf); 4561 /* Set tx_lo1_en. */ 4562 run_rt3070_rf_read(sc, 50, &rf); 4563 run_rt3070_rf_write(sc, 50, rf & ~0x20); 4564 /* Set drv_cc. */ 4565 run_rt3070_rf_read(sc, 57, &rf); 4566 rf &= ~0xfc; 4567 rf |= (chan <= 14) ? 0x6c : 0x3c; 4568 run_rt3070_rf_write(sc, 57, rf); 4569 /* Set rx_mix1_ic, rxa_lnactr, lna_vc, lna_inbias_en and lna_en. */ 4570 run_rt3070_rf_write(sc, 44, (chan <= 14) ? 0x93 : 0x9b); 4571 /* Set drv_gnd_a, tx_vga_cc_a and tx_mx2_gain. */ 4572 run_rt3070_rf_write(sc, 52, (chan <= 14) ? 0x45 : 0x05); 4573 /* Enable VCO calibration. */ 4574 run_rt3070_rf_read(sc, 3, &rf); 4575 rf &= ~RT5390_VCOCAL; 4576 rf |= (chan <= 14) ? RT5390_VCOCAL : 0xbe; 4577 run_rt3070_rf_write(sc, 3, rf); 4578 4579 if (chan <= 14) 4580 rf = 0x23; 4581 else if (chan <= 64) 4582 rf = 0x36; 4583 else if (chan <= 128) 4584 rf = 0x32; 4585 else 4586 rf = 0x30; 4587 run_rt3070_rf_write(sc, 39, rf); 4588 if (chan <= 14) 4589 rf = 0xbb; 4590 else if (chan <= 64) 4591 rf = 0xeb; 4592 else if (chan <= 128) 4593 rf = 0xb3; 4594 else 4595 rf = 0x9b; 4596 run_rt3070_rf_write(sc, 45, rf); 4597 4598 /* Set FEQ/AEQ control. */ 4599 run_bbp_write(sc, 105, 0x34); 4600 } 4601 4602 static void 4603 run_rt5390_set_chan(struct run_softc *sc, u_int chan) 4604 { 4605 int8_t txpow1, txpow2; 4606 uint8_t rf; 4607 int i; 4608 4609 /* find the settings for this channel (we know it exists) */ 4610 for (i = 0; rt2860_rf2850[i].chan != chan; i++); 4611 4612 /* use Tx power values from EEPROM */ 4613 txpow1 = sc->txpow1[i]; 4614 txpow2 = sc->txpow2[i]; 4615 4616 run_rt3070_rf_write(sc, 8, rt3070_freqs[i].n); 4617 run_rt3070_rf_write(sc, 9, rt3070_freqs[i].k & 0x0f); 4618 run_rt3070_rf_read(sc, 11, &rf); 4619 rf = (rf & ~0x03) | (rt3070_freqs[i].r & 0x03); 4620 run_rt3070_rf_write(sc, 11, rf); 4621 4622 run_rt3070_rf_read(sc, 49, &rf); 4623 rf = (rf & ~0x3f) | (txpow1 & 0x3f); 4624 /* The valid range of the RF R49 is 0x00 to 0x27. */ 4625 if ((rf & 0x3f) > 0x27) 4626 rf = (rf & ~0x3f) | 0x27; 4627 run_rt3070_rf_write(sc, 49, rf); 4628 4629 if (sc->mac_ver == 0x5392) { 4630 run_rt3070_rf_read(sc, 50, &rf); 4631 rf = (rf & ~0x3f) | (txpow2 & 0x3f); 4632 /* The valid range of the RF R50 is 0x00 to 0x27. */ 4633 if ((rf & 0x3f) > 0x27) 4634 rf = (rf & ~0x3f) | 0x27; 4635 run_rt3070_rf_write(sc, 50, rf); 4636 } 4637 4638 run_rt3070_rf_read(sc, 1, &rf); 4639 rf |= RT3070_RF_BLOCK | RT3070_PLL_PD | RT3070_RX0_PD | RT3070_TX0_PD; 4640 if (sc->mac_ver == 0x5392) 4641 rf |= RT3070_RX1_PD | RT3070_TX1_PD; 4642 run_rt3070_rf_write(sc, 1, rf); 4643 4644 if (sc->mac_ver != 0x5392) { 4645 run_rt3070_rf_read(sc, 2, &rf); 4646 rf |= 0x80; 4647 run_rt3070_rf_write(sc, 2, rf); 4648 run_delay(sc, 10); 4649 rf &= 0x7f; 4650 run_rt3070_rf_write(sc, 2, rf); 4651 } 4652 4653 run_adjust_freq_offset(sc); 4654 4655 if (sc->mac_ver == 0x5392) { 4656 /* Fix for RT5392C. */ 4657 if (sc->mac_rev >= 0x0223) { 4658 if (chan <= 4) 4659 rf = 0x0f; 4660 else if (chan >= 5 && chan <= 7) 4661 rf = 0x0e; 4662 else 4663 rf = 0x0d; 4664 run_rt3070_rf_write(sc, 23, rf); 4665 4666 if (chan <= 4) 4667 rf = 0x0c; 4668 else if (chan == 5) 4669 rf = 0x0b; 4670 else if (chan >= 6 && chan <= 7) 4671 rf = 0x0a; 4672 else if (chan >= 8 && chan <= 10) 4673 rf = 0x09; 4674 else 4675 rf = 0x08; 4676 run_rt3070_rf_write(sc, 59, rf); 4677 } else { 4678 if (chan <= 11) 4679 rf = 0x0f; 4680 else 4681 rf = 0x0b; 4682 run_rt3070_rf_write(sc, 59, rf); 4683 } 4684 } else { 4685 /* Fix for RT5390F. */ 4686 if (sc->mac_rev >= 0x0502) { 4687 if (chan <= 11) 4688 rf = 0x43; 4689 else 4690 rf = 0x23; 4691 run_rt3070_rf_write(sc, 55, rf); 4692 4693 if (chan <= 11) 4694 rf = 0x0f; 4695 else if (chan == 12) 4696 rf = 0x0d; 4697 else 4698 rf = 0x0b; 4699 run_rt3070_rf_write(sc, 59, rf); 4700 } else { 4701 run_rt3070_rf_write(sc, 55, 0x44); 4702 run_rt3070_rf_write(sc, 59, 0x8f); 4703 } 4704 } 4705 4706 /* Enable VCO calibration. */ 4707 run_rt3070_rf_read(sc, 3, &rf); 4708 rf |= RT5390_VCOCAL; 4709 run_rt3070_rf_write(sc, 3, rf); 4710 } 4711 4712 static void 4713 run_rt5592_set_chan(struct run_softc *sc, u_int chan) 4714 { 4715 const struct rt5592_freqs *freqs; 4716 uint32_t tmp; 4717 uint8_t reg, rf, txpow_bound; 4718 int8_t txpow1, txpow2; 4719 int i; 4720 4721 run_read(sc, RT5592_DEBUG_INDEX, &tmp); 4722 freqs = (tmp & RT5592_SEL_XTAL) ? 4723 rt5592_freqs_40mhz : rt5592_freqs_20mhz; 4724 4725 /* find the settings for this channel (we know it exists) */ 4726 for (i = 0; rt2860_rf2850[i].chan != chan; i++, freqs++); 4727 4728 /* use Tx power values from EEPROM */ 4729 txpow1 = sc->txpow1[i]; 4730 txpow2 = sc->txpow2[i]; 4731 4732 run_read(sc, RT3070_LDO_CFG0, &tmp); 4733 tmp &= ~0x1c000000; 4734 if (chan > 14) 4735 tmp |= 0x14000000; 4736 run_write(sc, RT3070_LDO_CFG0, tmp); 4737 4738 /* N setting. */ 4739 run_rt3070_rf_write(sc, 8, freqs->n & 0xff); 4740 run_rt3070_rf_read(sc, 9, &rf); 4741 rf &= ~(1 << 4); 4742 rf |= ((freqs->n & 0x0100) >> 8) << 4; 4743 run_rt3070_rf_write(sc, 9, rf); 4744 4745 /* K setting. */ 4746 run_rt3070_rf_read(sc, 9, &rf); 4747 rf &= ~0x0f; 4748 rf |= (freqs->k & 0x0f); 4749 run_rt3070_rf_write(sc, 9, rf); 4750 4751 /* Mode setting. */ 4752 run_rt3070_rf_read(sc, 11, &rf); 4753 rf &= ~0x0c; 4754 rf |= ((freqs->m - 0x8) & 0x3) << 2; 4755 run_rt3070_rf_write(sc, 11, rf); 4756 run_rt3070_rf_read(sc, 9, &rf); 4757 rf &= ~(1 << 7); 4758 rf |= (((freqs->m - 0x8) & 0x4) >> 2) << 7; 4759 run_rt3070_rf_write(sc, 9, rf); 4760 4761 /* R setting. */ 4762 run_rt3070_rf_read(sc, 11, &rf); 4763 rf &= ~0x03; 4764 rf |= (freqs->r - 0x1); 4765 run_rt3070_rf_write(sc, 11, rf); 4766 4767 if (chan <= 14) { 4768 /* Initialize RF registers for 2GHZ. */ 4769 for (i = 0; i < nitems(rt5592_2ghz_def_rf); i++) { 4770 run_rt3070_rf_write(sc, rt5592_2ghz_def_rf[i].reg, 4771 rt5592_2ghz_def_rf[i].val); 4772 } 4773 4774 rf = (chan <= 10) ? 0x07 : 0x06; 4775 run_rt3070_rf_write(sc, 23, rf); 4776 run_rt3070_rf_write(sc, 59, rf); 4777 4778 run_rt3070_rf_write(sc, 55, 0x43); 4779 4780 /* 4781 * RF R49/R50 Tx power ALC code. 4782 * G-band bit<7:6>=1:0, bit<5:0> range from 0x0 ~ 0x27. 4783 */ 4784 reg = 2; 4785 txpow_bound = 0x27; 4786 } else { 4787 /* Initialize RF registers for 5GHZ. */ 4788 for (i = 0; i < nitems(rt5592_5ghz_def_rf); i++) { 4789 run_rt3070_rf_write(sc, rt5592_5ghz_def_rf[i].reg, 4790 rt5592_5ghz_def_rf[i].val); 4791 } 4792 for (i = 0; i < nitems(rt5592_chan_5ghz); i++) { 4793 if (chan >= rt5592_chan_5ghz[i].firstchan && 4794 chan <= rt5592_chan_5ghz[i].lastchan) { 4795 run_rt3070_rf_write(sc, rt5592_chan_5ghz[i].reg, 4796 rt5592_chan_5ghz[i].val); 4797 } 4798 } 4799 4800 /* 4801 * RF R49/R50 Tx power ALC code. 4802 * A-band bit<7:6>=1:1, bit<5:0> range from 0x0 ~ 0x2b. 4803 */ 4804 reg = 3; 4805 txpow_bound = 0x2b; 4806 } 4807 4808 /* RF R49 ch0 Tx power ALC code. */ 4809 run_rt3070_rf_read(sc, 49, &rf); 4810 rf &= ~0xc0; 4811 rf |= (reg << 6); 4812 rf = (rf & ~0x3f) | (txpow1 & 0x3f); 4813 if ((rf & 0x3f) > txpow_bound) 4814 rf = (rf & ~0x3f) | txpow_bound; 4815 run_rt3070_rf_write(sc, 49, rf); 4816 4817 /* RF R50 ch1 Tx power ALC code. */ 4818 run_rt3070_rf_read(sc, 50, &rf); 4819 rf &= ~(1 << 7 | 1 << 6); 4820 rf |= (reg << 6); 4821 rf = (rf & ~0x3f) | (txpow2 & 0x3f); 4822 if ((rf & 0x3f) > txpow_bound) 4823 rf = (rf & ~0x3f) | txpow_bound; 4824 run_rt3070_rf_write(sc, 50, rf); 4825 4826 /* Enable RF_BLOCK, PLL_PD, RX0_PD, and TX0_PD. */ 4827 run_rt3070_rf_read(sc, 1, &rf); 4828 rf |= (RT3070_RF_BLOCK | RT3070_PLL_PD | RT3070_RX0_PD | RT3070_TX0_PD); 4829 if (sc->ntxchains > 1) 4830 rf |= RT3070_TX1_PD; 4831 if (sc->nrxchains > 1) 4832 rf |= RT3070_RX1_PD; 4833 run_rt3070_rf_write(sc, 1, rf); 4834 4835 run_rt3070_rf_write(sc, 6, 0xe4); 4836 4837 run_rt3070_rf_write(sc, 30, 0x10); 4838 run_rt3070_rf_write(sc, 31, 0x80); 4839 run_rt3070_rf_write(sc, 32, 0x80); 4840 4841 run_adjust_freq_offset(sc); 4842 4843 /* Enable VCO calibration. */ 4844 run_rt3070_rf_read(sc, 3, &rf); 4845 rf |= RT5390_VCOCAL; 4846 run_rt3070_rf_write(sc, 3, rf); 4847 } 4848 4849 static void 4850 run_set_rx_antenna(struct run_softc *sc, int aux) 4851 { 4852 uint32_t tmp; 4853 uint8_t bbp152; 4854 4855 if (aux) { 4856 if (sc->rf_rev == RT5390_RF_5370) { 4857 run_bbp_read(sc, 152, &bbp152); 4858 run_bbp_write(sc, 152, bbp152 & ~0x80); 4859 } else { 4860 run_mcu_cmd(sc, RT2860_MCU_CMD_ANTSEL, 0); 4861 run_read(sc, RT2860_GPIO_CTRL, &tmp); 4862 run_write(sc, RT2860_GPIO_CTRL, (tmp & ~0x0808) | 0x08); 4863 } 4864 } else { 4865 if (sc->rf_rev == RT5390_RF_5370) { 4866 run_bbp_read(sc, 152, &bbp152); 4867 run_bbp_write(sc, 152, bbp152 | 0x80); 4868 } else { 4869 run_mcu_cmd(sc, RT2860_MCU_CMD_ANTSEL, 1); 4870 run_read(sc, RT2860_GPIO_CTRL, &tmp); 4871 run_write(sc, RT2860_GPIO_CTRL, tmp & ~0x0808); 4872 } 4873 } 4874 } 4875 4876 static int 4877 run_set_chan(struct run_softc *sc, struct ieee80211_channel *c) 4878 { 4879 struct ieee80211com *ic = &sc->sc_ic; 4880 u_int chan, group; 4881 4882 chan = ieee80211_chan2ieee(ic, c); 4883 if (chan == 0 || chan == IEEE80211_CHAN_ANY) 4884 return (EINVAL); 4885 4886 if (sc->mac_ver == 0x5592) 4887 run_rt5592_set_chan(sc, chan); 4888 else if (sc->mac_ver >= 0x5390) 4889 run_rt5390_set_chan(sc, chan); 4890 else if (sc->mac_ver == 0x3593) 4891 run_rt3593_set_chan(sc, chan); 4892 else if (sc->mac_ver == 0x3572) 4893 run_rt3572_set_chan(sc, chan); 4894 else if (sc->mac_ver >= 0x3070) 4895 run_rt3070_set_chan(sc, chan); 4896 else 4897 run_rt2870_set_chan(sc, chan); 4898 4899 /* determine channel group */ 4900 if (chan <= 14) 4901 group = 0; 4902 else if (chan <= 64) 4903 group = 1; 4904 else if (chan <= 128) 4905 group = 2; 4906 else 4907 group = 3; 4908 4909 /* XXX necessary only when group has changed! */ 4910 run_select_chan_group(sc, group); 4911 4912 run_delay(sc, 10); 4913 4914 /* Perform IQ calibration. */ 4915 if (sc->mac_ver >= 0x5392) 4916 run_iq_calib(sc, chan); 4917 4918 return (0); 4919 } 4920 4921 static void 4922 run_set_channel(struct ieee80211com *ic) 4923 { 4924 struct run_softc *sc = ic->ic_softc; 4925 4926 RUN_LOCK(sc); 4927 run_set_chan(sc, ic->ic_curchan); 4928 RUN_UNLOCK(sc); 4929 4930 return; 4931 } 4932 4933 static void 4934 run_getradiocaps(struct ieee80211com *ic, 4935 int maxchans, int *nchans, struct ieee80211_channel chans[]) 4936 { 4937 struct run_softc *sc = ic->ic_softc; 4938 uint8_t bands[IEEE80211_MODE_BYTES]; 4939 4940 memset(bands, 0, sizeof(bands)); 4941 setbit(bands, IEEE80211_MODE_11B); 4942 setbit(bands, IEEE80211_MODE_11G); 4943 if (sc->rf_rev != RT3070_RF_2020) 4944 setbit(bands, IEEE80211_MODE_11NG); 4945 4946 /* Note: for now, only support HT20 channels */ 4947 ieee80211_add_channels_default_2ghz(chans, maxchans, nchans, bands, 0); 4948 4949 if (sc->rf_rev == RT2860_RF_2750 || sc->rf_rev == RT2860_RF_2850 || 4950 sc->rf_rev == RT3070_RF_3052 || sc->rf_rev == RT3593_RF_3053 || 4951 sc->rf_rev == RT5592_RF_5592) { 4952 setbit(bands, IEEE80211_MODE_11A); 4953 if (sc->rf_rev != RT3070_RF_2020) 4954 setbit(bands, IEEE80211_MODE_11NA); 4955 /* Note: for now, only support HT20 channels */ 4956 ieee80211_add_channel_list_5ghz(chans, maxchans, nchans, 4957 run_chan_5ghz, nitems(run_chan_5ghz), bands, 0); 4958 } 4959 } 4960 4961 static void 4962 run_scan_start(struct ieee80211com *ic) 4963 { 4964 struct run_softc *sc = ic->ic_softc; 4965 4966 RUN_LOCK(sc); 4967 4968 /* abort TSF synchronization */ 4969 run_disable_tsf(sc); 4970 run_set_bssid(sc, ieee80211broadcastaddr); 4971 4972 RUN_UNLOCK(sc); 4973 4974 return; 4975 } 4976 4977 static void 4978 run_scan_end(struct ieee80211com *ic) 4979 { 4980 struct run_softc *sc = ic->ic_softc; 4981 4982 RUN_LOCK(sc); 4983 4984 run_enable_tsf_sync(sc); 4985 run_set_bssid(sc, sc->sc_bssid); 4986 4987 RUN_UNLOCK(sc); 4988 4989 return; 4990 } 4991 4992 /* 4993 * Could be called from ieee80211_node_timeout() 4994 * (non-sleepable thread) 4995 */ 4996 static void 4997 run_update_beacon(struct ieee80211vap *vap, int item) 4998 { 4999 struct ieee80211com *ic = vap->iv_ic; 5000 struct ieee80211_beacon_offsets *bo = &vap->iv_bcn_off; 5001 struct ieee80211_node *ni = vap->iv_bss; 5002 struct run_softc *sc = ic->ic_softc; 5003 struct run_vap *rvp = RUN_VAP(vap); 5004 int mcast = 0; 5005 uint32_t i; 5006 5007 switch (item) { 5008 case IEEE80211_BEACON_ERP: 5009 run_updateslot(ic); 5010 break; 5011 case IEEE80211_BEACON_HTINFO: 5012 run_updateprot(ic); 5013 break; 5014 case IEEE80211_BEACON_TIM: 5015 mcast = 1; /*TODO*/ 5016 break; 5017 default: 5018 break; 5019 } 5020 5021 setbit(bo->bo_flags, item); 5022 if (rvp->beacon_mbuf == NULL) { 5023 rvp->beacon_mbuf = ieee80211_beacon_alloc(ni); 5024 if (rvp->beacon_mbuf == NULL) 5025 return; 5026 } 5027 ieee80211_beacon_update(ni, rvp->beacon_mbuf, mcast); 5028 5029 i = RUN_CMDQ_GET(&sc->cmdq_store); 5030 RUN_DPRINTF(sc, RUN_DEBUG_BEACON, "cmdq_store=%d\n", i); 5031 sc->cmdq[i].func = run_update_beacon_cb; 5032 sc->cmdq[i].arg0 = vap; 5033 ieee80211_runtask(ic, &sc->cmdq_task); 5034 5035 return; 5036 } 5037 5038 static void 5039 run_update_beacon_cb(void *arg) 5040 { 5041 struct ieee80211vap *vap = arg; 5042 struct ieee80211_node *ni = vap->iv_bss; 5043 struct run_vap *rvp = RUN_VAP(vap); 5044 struct ieee80211com *ic = vap->iv_ic; 5045 struct run_softc *sc = ic->ic_softc; 5046 struct rt2860_txwi txwi; 5047 struct mbuf *m; 5048 uint16_t txwisize; 5049 uint8_t ridx; 5050 5051 if (ni->ni_chan == IEEE80211_CHAN_ANYC) 5052 return; 5053 if (ic->ic_bsschan == IEEE80211_CHAN_ANYC) 5054 return; 5055 5056 /* 5057 * No need to call ieee80211_beacon_update(), run_update_beacon() 5058 * is taking care of appropriate calls. 5059 */ 5060 if (rvp->beacon_mbuf == NULL) { 5061 rvp->beacon_mbuf = ieee80211_beacon_alloc(ni); 5062 if (rvp->beacon_mbuf == NULL) 5063 return; 5064 } 5065 m = rvp->beacon_mbuf; 5066 5067 memset(&txwi, 0, sizeof(txwi)); 5068 txwi.wcid = 0xff; 5069 txwi.len = htole16(m->m_pkthdr.len); 5070 5071 /* send beacons at the lowest available rate */ 5072 ridx = (ic->ic_curmode == IEEE80211_MODE_11A) ? 5073 RT2860_RIDX_OFDM6 : RT2860_RIDX_CCK1; 5074 txwi.phy = htole16(rt2860_rates[ridx].mcs); 5075 if (rt2860_rates[ridx].phy == IEEE80211_T_OFDM) 5076 txwi.phy |= htole16(RT2860_PHY_OFDM); 5077 txwi.txop = RT2860_TX_TXOP_HT; 5078 txwi.flags = RT2860_TX_TS; 5079 txwi.xflags = RT2860_TX_NSEQ; 5080 5081 txwisize = (sc->mac_ver == 0x5592) ? 5082 sizeof(txwi) + sizeof(uint32_t) : sizeof(txwi); 5083 run_write_region_1(sc, RT2860_BCN_BASE(rvp->rvp_id), (uint8_t *)&txwi, 5084 txwisize); 5085 run_write_region_1(sc, RT2860_BCN_BASE(rvp->rvp_id) + txwisize, 5086 mtod(m, uint8_t *), (m->m_pkthdr.len + 1) & ~1); 5087 } 5088 5089 static void 5090 run_updateprot(struct ieee80211com *ic) 5091 { 5092 struct run_softc *sc = ic->ic_softc; 5093 uint32_t i; 5094 5095 i = RUN_CMDQ_GET(&sc->cmdq_store); 5096 RUN_DPRINTF(sc, RUN_DEBUG_BEACON, "cmdq_store=%d\n", i); 5097 sc->cmdq[i].func = run_updateprot_cb; 5098 sc->cmdq[i].arg0 = ic; 5099 ieee80211_runtask(ic, &sc->cmdq_task); 5100 } 5101 5102 static void 5103 run_updateprot_cb(void *arg) 5104 { 5105 struct ieee80211com *ic = arg; 5106 struct run_softc *sc = ic->ic_softc; 5107 uint32_t tmp; 5108 5109 tmp = RT2860_RTSTH_EN | RT2860_PROT_NAV_SHORT | RT2860_TXOP_ALLOW_ALL; 5110 /* setup protection frame rate (MCS code) */ 5111 tmp |= (ic->ic_curmode == IEEE80211_MODE_11A) ? 5112 rt2860_rates[RT2860_RIDX_OFDM6].mcs | RT2860_PHY_OFDM : 5113 rt2860_rates[RT2860_RIDX_CCK11].mcs; 5114 5115 /* CCK frames don't require protection */ 5116 run_write(sc, RT2860_CCK_PROT_CFG, tmp); 5117 if (ic->ic_flags & IEEE80211_F_USEPROT) { 5118 if (ic->ic_protmode == IEEE80211_PROT_RTSCTS) 5119 tmp |= RT2860_PROT_CTRL_RTS_CTS; 5120 else if (ic->ic_protmode == IEEE80211_PROT_CTSONLY) 5121 tmp |= RT2860_PROT_CTRL_CTS; 5122 } 5123 run_write(sc, RT2860_OFDM_PROT_CFG, tmp); 5124 } 5125 5126 static void 5127 run_usb_timeout_cb(void *arg) 5128 { 5129 struct ieee80211vap *vap = arg; 5130 struct run_softc *sc = vap->iv_ic->ic_softc; 5131 5132 RUN_LOCK_ASSERT(sc, MA_OWNED); 5133 5134 if(vap->iv_state == IEEE80211_S_RUN && 5135 vap->iv_opmode != IEEE80211_M_STA) 5136 run_reset_livelock(sc); 5137 else if (vap->iv_state == IEEE80211_S_SCAN) { 5138 RUN_DPRINTF(sc, RUN_DEBUG_USB | RUN_DEBUG_STATE, 5139 "timeout caused by scan\n"); 5140 /* cancel bgscan */ 5141 ieee80211_cancel_scan(vap); 5142 } else 5143 RUN_DPRINTF(sc, RUN_DEBUG_USB | RUN_DEBUG_STATE, 5144 "timeout by unknown cause\n"); 5145 } 5146 5147 static void 5148 run_reset_livelock(struct run_softc *sc) 5149 { 5150 uint32_t tmp; 5151 5152 RUN_LOCK_ASSERT(sc, MA_OWNED); 5153 5154 /* 5155 * In IBSS or HostAP modes (when the hardware sends beacons), the MAC 5156 * can run into a livelock and start sending CTS-to-self frames like 5157 * crazy if protection is enabled. Reset MAC/BBP for a while 5158 */ 5159 run_read(sc, RT2860_DEBUG, &tmp); 5160 RUN_DPRINTF(sc, RUN_DEBUG_RESET, "debug reg %08x\n", tmp); 5161 if ((tmp & (1 << 29)) && (tmp & (1 << 7 | 1 << 5))) { 5162 RUN_DPRINTF(sc, RUN_DEBUG_RESET, 5163 "CTS-to-self livelock detected\n"); 5164 run_write(sc, RT2860_MAC_SYS_CTRL, RT2860_MAC_SRST); 5165 run_delay(sc, 1); 5166 run_write(sc, RT2860_MAC_SYS_CTRL, 5167 RT2860_MAC_RX_EN | RT2860_MAC_TX_EN); 5168 } 5169 } 5170 5171 static void 5172 run_update_promisc_locked(struct run_softc *sc) 5173 { 5174 uint32_t tmp; 5175 5176 run_read(sc, RT2860_RX_FILTR_CFG, &tmp); 5177 5178 tmp |= RT2860_DROP_UC_NOME; 5179 if (sc->sc_ic.ic_promisc > 0) 5180 tmp &= ~RT2860_DROP_UC_NOME; 5181 5182 run_write(sc, RT2860_RX_FILTR_CFG, tmp); 5183 5184 RUN_DPRINTF(sc, RUN_DEBUG_RECV, "%s promiscuous mode\n", 5185 (sc->sc_ic.ic_promisc > 0) ? "entering" : "leaving"); 5186 } 5187 5188 static void 5189 run_update_promisc(struct ieee80211com *ic) 5190 { 5191 struct run_softc *sc = ic->ic_softc; 5192 5193 if ((sc->sc_flags & RUN_RUNNING) == 0) 5194 return; 5195 5196 RUN_LOCK(sc); 5197 run_update_promisc_locked(sc); 5198 RUN_UNLOCK(sc); 5199 } 5200 5201 static void 5202 run_enable_tsf_sync(struct run_softc *sc) 5203 { 5204 struct ieee80211com *ic = &sc->sc_ic; 5205 struct ieee80211vap *vap = TAILQ_FIRST(&ic->ic_vaps); 5206 uint32_t tmp; 5207 5208 RUN_DPRINTF(sc, RUN_DEBUG_BEACON, "rvp_id=%d ic_opmode=%d\n", 5209 RUN_VAP(vap)->rvp_id, ic->ic_opmode); 5210 5211 run_read(sc, RT2860_BCN_TIME_CFG, &tmp); 5212 tmp &= ~0x1fffff; 5213 tmp |= vap->iv_bss->ni_intval * 16; 5214 tmp |= RT2860_TSF_TIMER_EN | RT2860_TBTT_TIMER_EN; 5215 5216 if (ic->ic_opmode == IEEE80211_M_STA) { 5217 /* 5218 * Local TSF is always updated with remote TSF on beacon 5219 * reception. 5220 */ 5221 tmp |= 1 << RT2860_TSF_SYNC_MODE_SHIFT; 5222 } else if (ic->ic_opmode == IEEE80211_M_IBSS) { 5223 tmp |= RT2860_BCN_TX_EN; 5224 /* 5225 * Local TSF is updated with remote TSF on beacon reception 5226 * only if the remote TSF is greater than local TSF. 5227 */ 5228 tmp |= 2 << RT2860_TSF_SYNC_MODE_SHIFT; 5229 } else if (ic->ic_opmode == IEEE80211_M_HOSTAP || 5230 ic->ic_opmode == IEEE80211_M_MBSS) { 5231 tmp |= RT2860_BCN_TX_EN; 5232 /* SYNC with nobody */ 5233 tmp |= 3 << RT2860_TSF_SYNC_MODE_SHIFT; 5234 } else { 5235 RUN_DPRINTF(sc, RUN_DEBUG_BEACON, 5236 "Enabling TSF failed. undefined opmode\n"); 5237 return; 5238 } 5239 5240 run_write(sc, RT2860_BCN_TIME_CFG, tmp); 5241 } 5242 5243 static void 5244 run_enable_tsf(struct run_softc *sc) 5245 { 5246 uint32_t tmp; 5247 5248 if (run_read(sc, RT2860_BCN_TIME_CFG, &tmp) == 0) { 5249 tmp &= ~(RT2860_BCN_TX_EN | RT2860_TBTT_TIMER_EN); 5250 tmp |= RT2860_TSF_TIMER_EN; 5251 run_write(sc, RT2860_BCN_TIME_CFG, tmp); 5252 } 5253 } 5254 5255 static void 5256 run_disable_tsf(struct run_softc *sc) 5257 { 5258 uint32_t tmp; 5259 5260 if (run_read(sc, RT2860_BCN_TIME_CFG, &tmp) == 0) { 5261 tmp &= ~(RT2860_BCN_TX_EN | RT2860_TSF_TIMER_EN | 5262 RT2860_TBTT_TIMER_EN); 5263 run_write(sc, RT2860_BCN_TIME_CFG, tmp); 5264 } 5265 } 5266 5267 static void 5268 run_get_tsf(struct run_softc *sc, uint64_t *buf) 5269 { 5270 run_read_region_1(sc, RT2860_TSF_TIMER_DW0, (uint8_t *)buf, 5271 sizeof(*buf)); 5272 } 5273 5274 static void 5275 run_enable_mrr(struct run_softc *sc) 5276 { 5277 #define CCK(mcs) (mcs) 5278 #define OFDM(mcs) (1 << 3 | (mcs)) 5279 run_write(sc, RT2860_LG_FBK_CFG0, 5280 OFDM(6) << 28 | /* 54->48 */ 5281 OFDM(5) << 24 | /* 48->36 */ 5282 OFDM(4) << 20 | /* 36->24 */ 5283 OFDM(3) << 16 | /* 24->18 */ 5284 OFDM(2) << 12 | /* 18->12 */ 5285 OFDM(1) << 8 | /* 12-> 9 */ 5286 OFDM(0) << 4 | /* 9-> 6 */ 5287 OFDM(0)); /* 6-> 6 */ 5288 5289 run_write(sc, RT2860_LG_FBK_CFG1, 5290 CCK(2) << 12 | /* 11->5.5 */ 5291 CCK(1) << 8 | /* 5.5-> 2 */ 5292 CCK(0) << 4 | /* 2-> 1 */ 5293 CCK(0)); /* 1-> 1 */ 5294 #undef OFDM 5295 #undef CCK 5296 } 5297 5298 static void 5299 run_set_txpreamble(struct run_softc *sc) 5300 { 5301 struct ieee80211com *ic = &sc->sc_ic; 5302 uint32_t tmp; 5303 5304 run_read(sc, RT2860_AUTO_RSP_CFG, &tmp); 5305 if (ic->ic_flags & IEEE80211_F_SHPREAMBLE) 5306 tmp |= RT2860_CCK_SHORT_EN; 5307 else 5308 tmp &= ~RT2860_CCK_SHORT_EN; 5309 run_write(sc, RT2860_AUTO_RSP_CFG, tmp); 5310 } 5311 5312 static void 5313 run_set_basicrates(struct run_softc *sc) 5314 { 5315 struct ieee80211com *ic = &sc->sc_ic; 5316 5317 /* set basic rates mask */ 5318 if (ic->ic_curmode == IEEE80211_MODE_11B) 5319 run_write(sc, RT2860_LEGACY_BASIC_RATE, 0x003); 5320 else if (ic->ic_curmode == IEEE80211_MODE_11A) 5321 run_write(sc, RT2860_LEGACY_BASIC_RATE, 0x150); 5322 else /* 11g */ 5323 run_write(sc, RT2860_LEGACY_BASIC_RATE, 0x15f); 5324 } 5325 5326 static void 5327 run_set_leds(struct run_softc *sc, uint16_t which) 5328 { 5329 (void)run_mcu_cmd(sc, RT2860_MCU_CMD_LEDS, 5330 which | (sc->leds & 0x7f)); 5331 } 5332 5333 static void 5334 run_set_bssid(struct run_softc *sc, const uint8_t *bssid) 5335 { 5336 run_write(sc, RT2860_MAC_BSSID_DW0, 5337 bssid[0] | bssid[1] << 8 | bssid[2] << 16 | bssid[3] << 24); 5338 run_write(sc, RT2860_MAC_BSSID_DW1, 5339 bssid[4] | bssid[5] << 8); 5340 } 5341 5342 static void 5343 run_set_macaddr(struct run_softc *sc, const uint8_t *addr) 5344 { 5345 run_write(sc, RT2860_MAC_ADDR_DW0, 5346 addr[0] | addr[1] << 8 | addr[2] << 16 | addr[3] << 24); 5347 run_write(sc, RT2860_MAC_ADDR_DW1, 5348 addr[4] | addr[5] << 8 | 0xff << 16); 5349 } 5350 5351 static void 5352 run_updateslot(struct ieee80211com *ic) 5353 { 5354 struct run_softc *sc = ic->ic_softc; 5355 uint32_t i; 5356 5357 i = RUN_CMDQ_GET(&sc->cmdq_store); 5358 RUN_DPRINTF(sc, RUN_DEBUG_BEACON, "cmdq_store=%d\n", i); 5359 sc->cmdq[i].func = run_updateslot_cb; 5360 sc->cmdq[i].arg0 = ic; 5361 ieee80211_runtask(ic, &sc->cmdq_task); 5362 5363 return; 5364 } 5365 5366 /* ARGSUSED */ 5367 static void 5368 run_updateslot_cb(void *arg) 5369 { 5370 struct ieee80211com *ic = arg; 5371 struct run_softc *sc = ic->ic_softc; 5372 uint32_t tmp; 5373 5374 run_read(sc, RT2860_BKOFF_SLOT_CFG, &tmp); 5375 tmp &= ~0xff; 5376 tmp |= IEEE80211_GET_SLOTTIME(ic); 5377 run_write(sc, RT2860_BKOFF_SLOT_CFG, tmp); 5378 } 5379 5380 static void 5381 run_update_mcast(struct ieee80211com *ic) 5382 { 5383 } 5384 5385 static int8_t 5386 run_rssi2dbm(struct run_softc *sc, uint8_t rssi, uint8_t rxchain) 5387 { 5388 struct ieee80211com *ic = &sc->sc_ic; 5389 struct ieee80211_channel *c = ic->ic_curchan; 5390 int delta; 5391 5392 if (IEEE80211_IS_CHAN_5GHZ(c)) { 5393 u_int chan = ieee80211_chan2ieee(ic, c); 5394 delta = sc->rssi_5ghz[rxchain]; 5395 5396 /* determine channel group */ 5397 if (chan <= 64) 5398 delta -= sc->lna[1]; 5399 else if (chan <= 128) 5400 delta -= sc->lna[2]; 5401 else 5402 delta -= sc->lna[3]; 5403 } else 5404 delta = sc->rssi_2ghz[rxchain] - sc->lna[0]; 5405 5406 return (-12 - delta - rssi); 5407 } 5408 5409 static void 5410 run_rt5390_bbp_init(struct run_softc *sc) 5411 { 5412 u_int i; 5413 uint8_t bbp; 5414 5415 /* Apply maximum likelihood detection for 2 stream case. */ 5416 run_bbp_read(sc, 105, &bbp); 5417 if (sc->nrxchains > 1) 5418 run_bbp_write(sc, 105, bbp | RT5390_MLD); 5419 5420 /* Avoid data lost and CRC error. */ 5421 run_bbp_read(sc, 4, &bbp); 5422 run_bbp_write(sc, 4, bbp | RT5390_MAC_IF_CTRL); 5423 5424 if (sc->mac_ver == 0x5592) { 5425 for (i = 0; i < nitems(rt5592_def_bbp); i++) { 5426 run_bbp_write(sc, rt5592_def_bbp[i].reg, 5427 rt5592_def_bbp[i].val); 5428 } 5429 for (i = 0; i < nitems(rt5592_bbp_r196); i++) { 5430 run_bbp_write(sc, 195, i + 0x80); 5431 run_bbp_write(sc, 196, rt5592_bbp_r196[i]); 5432 } 5433 } else { 5434 for (i = 0; i < nitems(rt5390_def_bbp); i++) { 5435 run_bbp_write(sc, rt5390_def_bbp[i].reg, 5436 rt5390_def_bbp[i].val); 5437 } 5438 } 5439 if (sc->mac_ver == 0x5392) { 5440 run_bbp_write(sc, 88, 0x90); 5441 run_bbp_write(sc, 95, 0x9a); 5442 run_bbp_write(sc, 98, 0x12); 5443 run_bbp_write(sc, 106, 0x12); 5444 run_bbp_write(sc, 134, 0xd0); 5445 run_bbp_write(sc, 135, 0xf6); 5446 run_bbp_write(sc, 148, 0x84); 5447 } 5448 5449 run_bbp_read(sc, 152, &bbp); 5450 run_bbp_write(sc, 152, bbp | 0x80); 5451 5452 /* Fix BBP254 for RT5592C. */ 5453 if (sc->mac_ver == 0x5592 && sc->mac_rev >= 0x0221) { 5454 run_bbp_read(sc, 254, &bbp); 5455 run_bbp_write(sc, 254, bbp | 0x80); 5456 } 5457 5458 /* Disable hardware antenna diversity. */ 5459 if (sc->mac_ver == 0x5390) 5460 run_bbp_write(sc, 154, 0); 5461 5462 /* Initialize Rx CCK/OFDM frequency offset report. */ 5463 run_bbp_write(sc, 142, 1); 5464 run_bbp_write(sc, 143, 57); 5465 } 5466 5467 static int 5468 run_bbp_init(struct run_softc *sc) 5469 { 5470 int i, error, ntries; 5471 uint8_t bbp0; 5472 5473 /* wait for BBP to wake up */ 5474 for (ntries = 0; ntries < 20; ntries++) { 5475 if ((error = run_bbp_read(sc, 0, &bbp0)) != 0) 5476 return error; 5477 if (bbp0 != 0 && bbp0 != 0xff) 5478 break; 5479 } 5480 if (ntries == 20) 5481 return (ETIMEDOUT); 5482 5483 /* initialize BBP registers to default values */ 5484 if (sc->mac_ver >= 0x5390) 5485 run_rt5390_bbp_init(sc); 5486 else { 5487 for (i = 0; i < nitems(rt2860_def_bbp); i++) { 5488 run_bbp_write(sc, rt2860_def_bbp[i].reg, 5489 rt2860_def_bbp[i].val); 5490 } 5491 } 5492 5493 if (sc->mac_ver == 0x3593) { 5494 run_bbp_write(sc, 79, 0x13); 5495 run_bbp_write(sc, 80, 0x05); 5496 run_bbp_write(sc, 81, 0x33); 5497 run_bbp_write(sc, 86, 0x46); 5498 run_bbp_write(sc, 137, 0x0f); 5499 } 5500 5501 /* fix BBP84 for RT2860E */ 5502 if (sc->mac_ver == 0x2860 && sc->mac_rev != 0x0101) 5503 run_bbp_write(sc, 84, 0x19); 5504 5505 if (sc->mac_ver >= 0x3070 && (sc->mac_ver != 0x3593 && 5506 sc->mac_ver != 0x5592)) { 5507 run_bbp_write(sc, 79, 0x13); 5508 run_bbp_write(sc, 80, 0x05); 5509 run_bbp_write(sc, 81, 0x33); 5510 } else if (sc->mac_ver == 0x2860 && sc->mac_rev == 0x0100) { 5511 run_bbp_write(sc, 69, 0x16); 5512 run_bbp_write(sc, 73, 0x12); 5513 } 5514 return (0); 5515 } 5516 5517 static int 5518 run_rt3070_rf_init(struct run_softc *sc) 5519 { 5520 uint32_t tmp; 5521 uint8_t bbp4, mingain, rf, target; 5522 u_int i; 5523 5524 run_rt3070_rf_read(sc, 30, &rf); 5525 /* toggle RF R30 bit 7 */ 5526 run_rt3070_rf_write(sc, 30, rf | 0x80); 5527 run_delay(sc, 10); 5528 run_rt3070_rf_write(sc, 30, rf & ~0x80); 5529 5530 /* initialize RF registers to default value */ 5531 if (sc->mac_ver == 0x3572) { 5532 for (i = 0; i < nitems(rt3572_def_rf); i++) { 5533 run_rt3070_rf_write(sc, rt3572_def_rf[i].reg, 5534 rt3572_def_rf[i].val); 5535 } 5536 } else { 5537 for (i = 0; i < nitems(rt3070_def_rf); i++) { 5538 run_rt3070_rf_write(sc, rt3070_def_rf[i].reg, 5539 rt3070_def_rf[i].val); 5540 } 5541 } 5542 5543 if (sc->mac_ver == 0x3070 && sc->mac_rev < 0x0201) { 5544 /* 5545 * Change voltage from 1.2V to 1.35V for RT3070. 5546 * The DAC issue (RT3070_LDO_CFG0) has been fixed 5547 * in RT3070(F). 5548 */ 5549 run_read(sc, RT3070_LDO_CFG0, &tmp); 5550 tmp = (tmp & ~0x0f000000) | 0x0d000000; 5551 run_write(sc, RT3070_LDO_CFG0, tmp); 5552 5553 } else if (sc->mac_ver == 0x3071) { 5554 run_rt3070_rf_read(sc, 6, &rf); 5555 run_rt3070_rf_write(sc, 6, rf | 0x40); 5556 run_rt3070_rf_write(sc, 31, 0x14); 5557 5558 run_read(sc, RT3070_LDO_CFG0, &tmp); 5559 tmp &= ~0x1f000000; 5560 if (sc->mac_rev < 0x0211) 5561 tmp |= 0x0d000000; /* 1.3V */ 5562 else 5563 tmp |= 0x01000000; /* 1.2V */ 5564 run_write(sc, RT3070_LDO_CFG0, tmp); 5565 5566 /* patch LNA_PE_G1 */ 5567 run_read(sc, RT3070_GPIO_SWITCH, &tmp); 5568 run_write(sc, RT3070_GPIO_SWITCH, tmp & ~0x20); 5569 5570 } else if (sc->mac_ver == 0x3572) { 5571 run_rt3070_rf_read(sc, 6, &rf); 5572 run_rt3070_rf_write(sc, 6, rf | 0x40); 5573 5574 /* increase voltage from 1.2V to 1.35V */ 5575 run_read(sc, RT3070_LDO_CFG0, &tmp); 5576 tmp = (tmp & ~0x1f000000) | 0x0d000000; 5577 run_write(sc, RT3070_LDO_CFG0, tmp); 5578 5579 if (sc->mac_rev < 0x0211 || !sc->patch_dac) { 5580 run_delay(sc, 1); /* wait for 1msec */ 5581 /* decrease voltage back to 1.2V */ 5582 tmp = (tmp & ~0x1f000000) | 0x01000000; 5583 run_write(sc, RT3070_LDO_CFG0, tmp); 5584 } 5585 } 5586 5587 /* select 20MHz bandwidth */ 5588 run_rt3070_rf_read(sc, 31, &rf); 5589 run_rt3070_rf_write(sc, 31, rf & ~0x20); 5590 5591 /* calibrate filter for 20MHz bandwidth */ 5592 sc->rf24_20mhz = 0x1f; /* default value */ 5593 target = (sc->mac_ver < 0x3071) ? 0x16 : 0x13; 5594 run_rt3070_filter_calib(sc, 0x07, target, &sc->rf24_20mhz); 5595 5596 /* select 40MHz bandwidth */ 5597 run_bbp_read(sc, 4, &bbp4); 5598 run_bbp_write(sc, 4, (bbp4 & ~0x18) | 0x10); 5599 run_rt3070_rf_read(sc, 31, &rf); 5600 run_rt3070_rf_write(sc, 31, rf | 0x20); 5601 5602 /* calibrate filter for 40MHz bandwidth */ 5603 sc->rf24_40mhz = 0x2f; /* default value */ 5604 target = (sc->mac_ver < 0x3071) ? 0x19 : 0x15; 5605 run_rt3070_filter_calib(sc, 0x27, target, &sc->rf24_40mhz); 5606 5607 /* go back to 20MHz bandwidth */ 5608 run_bbp_read(sc, 4, &bbp4); 5609 run_bbp_write(sc, 4, bbp4 & ~0x18); 5610 5611 if (sc->mac_ver == 0x3572) { 5612 /* save default BBP registers 25 and 26 values */ 5613 run_bbp_read(sc, 25, &sc->bbp25); 5614 run_bbp_read(sc, 26, &sc->bbp26); 5615 } else if (sc->mac_rev < 0x0201 || sc->mac_rev < 0x0211) 5616 run_rt3070_rf_write(sc, 27, 0x03); 5617 5618 run_read(sc, RT3070_OPT_14, &tmp); 5619 run_write(sc, RT3070_OPT_14, tmp | 1); 5620 5621 if (sc->mac_ver == 0x3070 || sc->mac_ver == 0x3071) { 5622 run_rt3070_rf_read(sc, 17, &rf); 5623 rf &= ~RT3070_TX_LO1; 5624 if ((sc->mac_ver == 0x3070 || 5625 (sc->mac_ver == 0x3071 && sc->mac_rev >= 0x0211)) && 5626 !sc->ext_2ghz_lna) 5627 rf |= 0x20; /* fix for long range Rx issue */ 5628 mingain = (sc->mac_ver == 0x3070) ? 1 : 2; 5629 if (sc->txmixgain_2ghz >= mingain) 5630 rf = (rf & ~0x7) | sc->txmixgain_2ghz; 5631 run_rt3070_rf_write(sc, 17, rf); 5632 } 5633 5634 if (sc->mac_ver == 0x3071) { 5635 run_rt3070_rf_read(sc, 1, &rf); 5636 rf &= ~(RT3070_RX0_PD | RT3070_TX0_PD); 5637 rf |= RT3070_RF_BLOCK | RT3070_RX1_PD | RT3070_TX1_PD; 5638 run_rt3070_rf_write(sc, 1, rf); 5639 5640 run_rt3070_rf_read(sc, 15, &rf); 5641 run_rt3070_rf_write(sc, 15, rf & ~RT3070_TX_LO2); 5642 5643 run_rt3070_rf_read(sc, 20, &rf); 5644 run_rt3070_rf_write(sc, 20, rf & ~RT3070_RX_LO1); 5645 5646 run_rt3070_rf_read(sc, 21, &rf); 5647 run_rt3070_rf_write(sc, 21, rf & ~RT3070_RX_LO2); 5648 } 5649 5650 if (sc->mac_ver == 0x3070 || sc->mac_ver == 0x3071) { 5651 /* fix Tx to Rx IQ glitch by raising RF voltage */ 5652 run_rt3070_rf_read(sc, 27, &rf); 5653 rf &= ~0x77; 5654 if (sc->mac_rev < 0x0211) 5655 rf |= 0x03; 5656 run_rt3070_rf_write(sc, 27, rf); 5657 } 5658 return (0); 5659 } 5660 5661 static void 5662 run_rt3593_rf_init(struct run_softc *sc) 5663 { 5664 uint32_t tmp; 5665 uint8_t rf; 5666 u_int i; 5667 5668 /* Disable the GPIO bits 4 and 7 for LNA PE control. */ 5669 run_read(sc, RT3070_GPIO_SWITCH, &tmp); 5670 tmp &= ~(1 << 4 | 1 << 7); 5671 run_write(sc, RT3070_GPIO_SWITCH, tmp); 5672 5673 /* Initialize RF registers to default value. */ 5674 for (i = 0; i < nitems(rt3593_def_rf); i++) { 5675 run_rt3070_rf_write(sc, rt3593_def_rf[i].reg, 5676 rt3593_def_rf[i].val); 5677 } 5678 5679 /* Toggle RF R2 to initiate calibration. */ 5680 run_rt3070_rf_write(sc, 2, RT5390_RESCAL); 5681 5682 /* Initialize RF frequency offset. */ 5683 run_adjust_freq_offset(sc); 5684 5685 run_rt3070_rf_read(sc, 18, &rf); 5686 run_rt3070_rf_write(sc, 18, rf | RT3593_AUTOTUNE_BYPASS); 5687 5688 /* 5689 * Increase voltage from 1.2V to 1.35V, wait for 1 msec to 5690 * decrease voltage back to 1.2V. 5691 */ 5692 run_read(sc, RT3070_LDO_CFG0, &tmp); 5693 tmp = (tmp & ~0x1f000000) | 0x0d000000; 5694 run_write(sc, RT3070_LDO_CFG0, tmp); 5695 run_delay(sc, 1); 5696 tmp = (tmp & ~0x1f000000) | 0x01000000; 5697 run_write(sc, RT3070_LDO_CFG0, tmp); 5698 5699 sc->rf24_20mhz = 0x1f; 5700 sc->rf24_40mhz = 0x2f; 5701 5702 /* Save default BBP registers 25 and 26 values. */ 5703 run_bbp_read(sc, 25, &sc->bbp25); 5704 run_bbp_read(sc, 26, &sc->bbp26); 5705 5706 run_read(sc, RT3070_OPT_14, &tmp); 5707 run_write(sc, RT3070_OPT_14, tmp | 1); 5708 } 5709 5710 static void 5711 run_rt5390_rf_init(struct run_softc *sc) 5712 { 5713 uint32_t tmp; 5714 uint8_t rf; 5715 u_int i; 5716 5717 /* Toggle RF R2 to initiate calibration. */ 5718 if (sc->mac_ver == 0x5390) { 5719 run_rt3070_rf_read(sc, 2, &rf); 5720 run_rt3070_rf_write(sc, 2, rf | RT5390_RESCAL); 5721 run_delay(sc, 10); 5722 run_rt3070_rf_write(sc, 2, rf & ~RT5390_RESCAL); 5723 } else { 5724 run_rt3070_rf_write(sc, 2, RT5390_RESCAL); 5725 run_delay(sc, 10); 5726 } 5727 5728 /* Initialize RF registers to default value. */ 5729 if (sc->mac_ver == 0x5592) { 5730 for (i = 0; i < nitems(rt5592_def_rf); i++) { 5731 run_rt3070_rf_write(sc, rt5592_def_rf[i].reg, 5732 rt5592_def_rf[i].val); 5733 } 5734 /* Initialize RF frequency offset. */ 5735 run_adjust_freq_offset(sc); 5736 } else if (sc->mac_ver == 0x5392) { 5737 for (i = 0; i < nitems(rt5392_def_rf); i++) { 5738 run_rt3070_rf_write(sc, rt5392_def_rf[i].reg, 5739 rt5392_def_rf[i].val); 5740 } 5741 if (sc->mac_rev >= 0x0223) { 5742 run_rt3070_rf_write(sc, 23, 0x0f); 5743 run_rt3070_rf_write(sc, 24, 0x3e); 5744 run_rt3070_rf_write(sc, 51, 0x32); 5745 run_rt3070_rf_write(sc, 53, 0x22); 5746 run_rt3070_rf_write(sc, 56, 0xc1); 5747 run_rt3070_rf_write(sc, 59, 0x0f); 5748 } 5749 } else { 5750 for (i = 0; i < nitems(rt5390_def_rf); i++) { 5751 run_rt3070_rf_write(sc, rt5390_def_rf[i].reg, 5752 rt5390_def_rf[i].val); 5753 } 5754 if (sc->mac_rev >= 0x0502) { 5755 run_rt3070_rf_write(sc, 6, 0xe0); 5756 run_rt3070_rf_write(sc, 25, 0x80); 5757 run_rt3070_rf_write(sc, 46, 0x73); 5758 run_rt3070_rf_write(sc, 53, 0x00); 5759 run_rt3070_rf_write(sc, 56, 0x42); 5760 run_rt3070_rf_write(sc, 61, 0xd1); 5761 } 5762 } 5763 5764 sc->rf24_20mhz = 0x1f; /* default value */ 5765 sc->rf24_40mhz = (sc->mac_ver == 0x5592) ? 0 : 0x2f; 5766 5767 if (sc->mac_rev < 0x0211) 5768 run_rt3070_rf_write(sc, 27, 0x3); 5769 5770 run_read(sc, RT3070_OPT_14, &tmp); 5771 run_write(sc, RT3070_OPT_14, tmp | 1); 5772 } 5773 5774 static int 5775 run_rt3070_filter_calib(struct run_softc *sc, uint8_t init, uint8_t target, 5776 uint8_t *val) 5777 { 5778 uint8_t rf22, rf24; 5779 uint8_t bbp55_pb, bbp55_sb, delta; 5780 int ntries; 5781 5782 /* program filter */ 5783 run_rt3070_rf_read(sc, 24, &rf24); 5784 rf24 = (rf24 & 0xc0) | init; /* initial filter value */ 5785 run_rt3070_rf_write(sc, 24, rf24); 5786 5787 /* enable baseband loopback mode */ 5788 run_rt3070_rf_read(sc, 22, &rf22); 5789 run_rt3070_rf_write(sc, 22, rf22 | 0x01); 5790 5791 /* set power and frequency of passband test tone */ 5792 run_bbp_write(sc, 24, 0x00); 5793 for (ntries = 0; ntries < 100; ntries++) { 5794 /* transmit test tone */ 5795 run_bbp_write(sc, 25, 0x90); 5796 run_delay(sc, 10); 5797 /* read received power */ 5798 run_bbp_read(sc, 55, &bbp55_pb); 5799 if (bbp55_pb != 0) 5800 break; 5801 } 5802 if (ntries == 100) 5803 return (ETIMEDOUT); 5804 5805 /* set power and frequency of stopband test tone */ 5806 run_bbp_write(sc, 24, 0x06); 5807 for (ntries = 0; ntries < 100; ntries++) { 5808 /* transmit test tone */ 5809 run_bbp_write(sc, 25, 0x90); 5810 run_delay(sc, 10); 5811 /* read received power */ 5812 run_bbp_read(sc, 55, &bbp55_sb); 5813 5814 delta = bbp55_pb - bbp55_sb; 5815 if (delta > target) 5816 break; 5817 5818 /* reprogram filter */ 5819 rf24++; 5820 run_rt3070_rf_write(sc, 24, rf24); 5821 } 5822 if (ntries < 100) { 5823 if (rf24 != init) 5824 rf24--; /* backtrack */ 5825 *val = rf24; 5826 run_rt3070_rf_write(sc, 24, rf24); 5827 } 5828 5829 /* restore initial state */ 5830 run_bbp_write(sc, 24, 0x00); 5831 5832 /* disable baseband loopback mode */ 5833 run_rt3070_rf_read(sc, 22, &rf22); 5834 run_rt3070_rf_write(sc, 22, rf22 & ~0x01); 5835 5836 return (0); 5837 } 5838 5839 static void 5840 run_rt3070_rf_setup(struct run_softc *sc) 5841 { 5842 uint8_t bbp, rf; 5843 int i; 5844 5845 if (sc->mac_ver == 0x3572) { 5846 /* enable DC filter */ 5847 if (sc->mac_rev >= 0x0201) 5848 run_bbp_write(sc, 103, 0xc0); 5849 5850 run_bbp_read(sc, 138, &bbp); 5851 if (sc->ntxchains == 1) 5852 bbp |= 0x20; /* turn off DAC1 */ 5853 if (sc->nrxchains == 1) 5854 bbp &= ~0x02; /* turn off ADC1 */ 5855 run_bbp_write(sc, 138, bbp); 5856 5857 if (sc->mac_rev >= 0x0211) { 5858 /* improve power consumption */ 5859 run_bbp_read(sc, 31, &bbp); 5860 run_bbp_write(sc, 31, bbp & ~0x03); 5861 } 5862 5863 run_rt3070_rf_read(sc, 16, &rf); 5864 rf = (rf & ~0x07) | sc->txmixgain_2ghz; 5865 run_rt3070_rf_write(sc, 16, rf); 5866 5867 } else if (sc->mac_ver == 0x3071) { 5868 if (sc->mac_rev >= 0x0211) { 5869 /* enable DC filter */ 5870 run_bbp_write(sc, 103, 0xc0); 5871 5872 /* improve power consumption */ 5873 run_bbp_read(sc, 31, &bbp); 5874 run_bbp_write(sc, 31, bbp & ~0x03); 5875 } 5876 5877 run_bbp_read(sc, 138, &bbp); 5878 if (sc->ntxchains == 1) 5879 bbp |= 0x20; /* turn off DAC1 */ 5880 if (sc->nrxchains == 1) 5881 bbp &= ~0x02; /* turn off ADC1 */ 5882 run_bbp_write(sc, 138, bbp); 5883 5884 run_write(sc, RT2860_TX_SW_CFG1, 0); 5885 if (sc->mac_rev < 0x0211) { 5886 run_write(sc, RT2860_TX_SW_CFG2, 5887 sc->patch_dac ? 0x2c : 0x0f); 5888 } else 5889 run_write(sc, RT2860_TX_SW_CFG2, 0); 5890 5891 } else if (sc->mac_ver == 0x3070) { 5892 if (sc->mac_rev >= 0x0201) { 5893 /* enable DC filter */ 5894 run_bbp_write(sc, 103, 0xc0); 5895 5896 /* improve power consumption */ 5897 run_bbp_read(sc, 31, &bbp); 5898 run_bbp_write(sc, 31, bbp & ~0x03); 5899 } 5900 5901 if (sc->mac_rev < 0x0201) { 5902 run_write(sc, RT2860_TX_SW_CFG1, 0); 5903 run_write(sc, RT2860_TX_SW_CFG2, 0x2c); 5904 } else 5905 run_write(sc, RT2860_TX_SW_CFG2, 0); 5906 } 5907 5908 /* initialize RF registers from ROM for >=RT3071*/ 5909 if (sc->mac_ver >= 0x3071) { 5910 for (i = 0; i < 10; i++) { 5911 if (sc->rf[i].reg == 0 || sc->rf[i].reg == 0xff) 5912 continue; 5913 run_rt3070_rf_write(sc, sc->rf[i].reg, sc->rf[i].val); 5914 } 5915 } 5916 } 5917 5918 static void 5919 run_rt3593_rf_setup(struct run_softc *sc) 5920 { 5921 uint8_t bbp, rf; 5922 5923 if (sc->mac_rev >= 0x0211) { 5924 /* Enable DC filter. */ 5925 run_bbp_write(sc, 103, 0xc0); 5926 } 5927 run_write(sc, RT2860_TX_SW_CFG1, 0); 5928 if (sc->mac_rev < 0x0211) { 5929 run_write(sc, RT2860_TX_SW_CFG2, 5930 sc->patch_dac ? 0x2c : 0x0f); 5931 } else 5932 run_write(sc, RT2860_TX_SW_CFG2, 0); 5933 5934 run_rt3070_rf_read(sc, 50, &rf); 5935 run_rt3070_rf_write(sc, 50, rf & ~RT3593_TX_LO2); 5936 5937 run_rt3070_rf_read(sc, 51, &rf); 5938 rf = (rf & ~(RT3593_TX_LO1 | 0x0c)) | 5939 ((sc->txmixgain_2ghz & 0x07) << 2); 5940 run_rt3070_rf_write(sc, 51, rf); 5941 5942 run_rt3070_rf_read(sc, 38, &rf); 5943 run_rt3070_rf_write(sc, 38, rf & ~RT5390_RX_LO1); 5944 5945 run_rt3070_rf_read(sc, 39, &rf); 5946 run_rt3070_rf_write(sc, 39, rf & ~RT5390_RX_LO2); 5947 5948 run_rt3070_rf_read(sc, 1, &rf); 5949 run_rt3070_rf_write(sc, 1, rf & ~(RT3070_RF_BLOCK | RT3070_PLL_PD)); 5950 5951 run_rt3070_rf_read(sc, 30, &rf); 5952 rf = (rf & ~0x18) | 0x10; 5953 run_rt3070_rf_write(sc, 30, rf); 5954 5955 /* Apply maximum likelihood detection for 2 stream case. */ 5956 run_bbp_read(sc, 105, &bbp); 5957 if (sc->nrxchains > 1) 5958 run_bbp_write(sc, 105, bbp | RT5390_MLD); 5959 5960 /* Avoid data lost and CRC error. */ 5961 run_bbp_read(sc, 4, &bbp); 5962 run_bbp_write(sc, 4, bbp | RT5390_MAC_IF_CTRL); 5963 5964 run_bbp_write(sc, 92, 0x02); 5965 run_bbp_write(sc, 82, 0x82); 5966 run_bbp_write(sc, 106, 0x05); 5967 run_bbp_write(sc, 104, 0x92); 5968 run_bbp_write(sc, 88, 0x90); 5969 run_bbp_write(sc, 148, 0xc8); 5970 run_bbp_write(sc, 47, 0x48); 5971 run_bbp_write(sc, 120, 0x50); 5972 5973 run_bbp_write(sc, 163, 0x9d); 5974 5975 /* SNR mapping. */ 5976 run_bbp_write(sc, 142, 0x06); 5977 run_bbp_write(sc, 143, 0xa0); 5978 run_bbp_write(sc, 142, 0x07); 5979 run_bbp_write(sc, 143, 0xa1); 5980 run_bbp_write(sc, 142, 0x08); 5981 run_bbp_write(sc, 143, 0xa2); 5982 5983 run_bbp_write(sc, 31, 0x08); 5984 run_bbp_write(sc, 68, 0x0b); 5985 run_bbp_write(sc, 105, 0x04); 5986 } 5987 5988 static void 5989 run_rt5390_rf_setup(struct run_softc *sc) 5990 { 5991 uint8_t bbp, rf; 5992 5993 if (sc->mac_rev >= 0x0211) { 5994 /* Enable DC filter. */ 5995 run_bbp_write(sc, 103, 0xc0); 5996 5997 if (sc->mac_ver != 0x5592) { 5998 /* Improve power consumption. */ 5999 run_bbp_read(sc, 31, &bbp); 6000 run_bbp_write(sc, 31, bbp & ~0x03); 6001 } 6002 } 6003 6004 run_bbp_read(sc, 138, &bbp); 6005 if (sc->ntxchains == 1) 6006 bbp |= 0x20; /* turn off DAC1 */ 6007 if (sc->nrxchains == 1) 6008 bbp &= ~0x02; /* turn off ADC1 */ 6009 run_bbp_write(sc, 138, bbp); 6010 6011 run_rt3070_rf_read(sc, 38, &rf); 6012 run_rt3070_rf_write(sc, 38, rf & ~RT5390_RX_LO1); 6013 6014 run_rt3070_rf_read(sc, 39, &rf); 6015 run_rt3070_rf_write(sc, 39, rf & ~RT5390_RX_LO2); 6016 6017 /* Avoid data lost and CRC error. */ 6018 run_bbp_read(sc, 4, &bbp); 6019 run_bbp_write(sc, 4, bbp | RT5390_MAC_IF_CTRL); 6020 6021 run_rt3070_rf_read(sc, 30, &rf); 6022 rf = (rf & ~0x18) | 0x10; 6023 run_rt3070_rf_write(sc, 30, rf); 6024 6025 if (sc->mac_ver != 0x5592) { 6026 run_write(sc, RT2860_TX_SW_CFG1, 0); 6027 if (sc->mac_rev < 0x0211) { 6028 run_write(sc, RT2860_TX_SW_CFG2, 6029 sc->patch_dac ? 0x2c : 0x0f); 6030 } else 6031 run_write(sc, RT2860_TX_SW_CFG2, 0); 6032 } 6033 } 6034 6035 static int 6036 run_txrx_enable(struct run_softc *sc) 6037 { 6038 struct ieee80211com *ic = &sc->sc_ic; 6039 uint32_t tmp; 6040 int error, ntries; 6041 6042 run_write(sc, RT2860_MAC_SYS_CTRL, RT2860_MAC_TX_EN); 6043 for (ntries = 0; ntries < 200; ntries++) { 6044 if ((error = run_read(sc, RT2860_WPDMA_GLO_CFG, &tmp)) != 0) 6045 return (error); 6046 if ((tmp & (RT2860_TX_DMA_BUSY | RT2860_RX_DMA_BUSY)) == 0) 6047 break; 6048 run_delay(sc, 50); 6049 } 6050 if (ntries == 200) 6051 return (ETIMEDOUT); 6052 6053 run_delay(sc, 50); 6054 6055 tmp |= RT2860_RX_DMA_EN | RT2860_TX_DMA_EN | RT2860_TX_WB_DDONE; 6056 run_write(sc, RT2860_WPDMA_GLO_CFG, tmp); 6057 6058 /* enable Rx bulk aggregation (set timeout and limit) */ 6059 tmp = RT2860_USB_TX_EN | RT2860_USB_RX_EN | RT2860_USB_RX_AGG_EN | 6060 RT2860_USB_RX_AGG_TO(128) | RT2860_USB_RX_AGG_LMT(2); 6061 run_write(sc, RT2860_USB_DMA_CFG, tmp); 6062 6063 /* set Rx filter */ 6064 tmp = RT2860_DROP_CRC_ERR | RT2860_DROP_PHY_ERR; 6065 if (ic->ic_opmode != IEEE80211_M_MONITOR) { 6066 tmp |= RT2860_DROP_UC_NOME | RT2860_DROP_DUPL | 6067 RT2860_DROP_CTS | RT2860_DROP_BA | RT2860_DROP_ACK | 6068 RT2860_DROP_VER_ERR | RT2860_DROP_CTRL_RSV | 6069 RT2860_DROP_CFACK | RT2860_DROP_CFEND; 6070 if (ic->ic_opmode == IEEE80211_M_STA) 6071 tmp |= RT2860_DROP_RTS | RT2860_DROP_PSPOLL; 6072 } 6073 run_write(sc, RT2860_RX_FILTR_CFG, tmp); 6074 6075 run_write(sc, RT2860_MAC_SYS_CTRL, 6076 RT2860_MAC_RX_EN | RT2860_MAC_TX_EN); 6077 6078 return (0); 6079 } 6080 6081 static void 6082 run_adjust_freq_offset(struct run_softc *sc) 6083 { 6084 uint8_t rf, tmp; 6085 6086 run_rt3070_rf_read(sc, 17, &rf); 6087 tmp = rf; 6088 rf = (rf & ~0x7f) | (sc->freq & 0x7f); 6089 rf = MIN(rf, 0x5f); 6090 6091 if (tmp != rf) 6092 run_mcu_cmd(sc, 0x74, (tmp << 8 ) | rf); 6093 } 6094 6095 static void 6096 run_init_locked(struct run_softc *sc) 6097 { 6098 struct ieee80211com *ic = &sc->sc_ic; 6099 struct ieee80211vap *vap = TAILQ_FIRST(&ic->ic_vaps); 6100 uint32_t tmp; 6101 uint8_t bbp1, bbp3; 6102 int i; 6103 int ridx; 6104 int ntries; 6105 6106 if (ic->ic_nrunning > 1) 6107 return; 6108 6109 run_stop(sc); 6110 6111 if (run_load_microcode(sc) != 0) { 6112 device_printf(sc->sc_dev, "could not load 8051 microcode\n"); 6113 goto fail; 6114 } 6115 6116 for (ntries = 0; ntries < 100; ntries++) { 6117 if (run_read(sc, RT2860_ASIC_VER_ID, &tmp) != 0) 6118 goto fail; 6119 if (tmp != 0 && tmp != 0xffffffff) 6120 break; 6121 run_delay(sc, 10); 6122 } 6123 if (ntries == 100) 6124 goto fail; 6125 6126 for (i = 0; i != RUN_EP_QUEUES; i++) 6127 run_setup_tx_list(sc, &sc->sc_epq[i]); 6128 6129 run_set_macaddr(sc, vap ? vap->iv_myaddr : ic->ic_macaddr); 6130 6131 for (ntries = 0; ntries < 100; ntries++) { 6132 if (run_read(sc, RT2860_WPDMA_GLO_CFG, &tmp) != 0) 6133 goto fail; 6134 if ((tmp & (RT2860_TX_DMA_BUSY | RT2860_RX_DMA_BUSY)) == 0) 6135 break; 6136 run_delay(sc, 10); 6137 } 6138 if (ntries == 100) { 6139 device_printf(sc->sc_dev, "timeout waiting for DMA engine\n"); 6140 goto fail; 6141 } 6142 tmp &= 0xff0; 6143 tmp |= RT2860_TX_WB_DDONE; 6144 run_write(sc, RT2860_WPDMA_GLO_CFG, tmp); 6145 6146 /* turn off PME_OEN to solve high-current issue */ 6147 run_read(sc, RT2860_SYS_CTRL, &tmp); 6148 run_write(sc, RT2860_SYS_CTRL, tmp & ~RT2860_PME_OEN); 6149 6150 run_write(sc, RT2860_MAC_SYS_CTRL, 6151 RT2860_BBP_HRST | RT2860_MAC_SRST); 6152 run_write(sc, RT2860_USB_DMA_CFG, 0); 6153 6154 if (run_reset(sc) != 0) { 6155 device_printf(sc->sc_dev, "could not reset chipset\n"); 6156 goto fail; 6157 } 6158 6159 run_write(sc, RT2860_MAC_SYS_CTRL, 0); 6160 6161 /* init Tx power for all Tx rates (from EEPROM) */ 6162 for (ridx = 0; ridx < 5; ridx++) { 6163 if (sc->txpow20mhz[ridx] == 0xffffffff) 6164 continue; 6165 run_write(sc, RT2860_TX_PWR_CFG(ridx), sc->txpow20mhz[ridx]); 6166 } 6167 6168 for (i = 0; i < nitems(rt2870_def_mac); i++) 6169 run_write(sc, rt2870_def_mac[i].reg, rt2870_def_mac[i].val); 6170 run_write(sc, RT2860_WMM_AIFSN_CFG, 0x00002273); 6171 run_write(sc, RT2860_WMM_CWMIN_CFG, 0x00002344); 6172 run_write(sc, RT2860_WMM_CWMAX_CFG, 0x000034aa); 6173 6174 if (sc->mac_ver >= 0x5390) { 6175 run_write(sc, RT2860_TX_SW_CFG0, 6176 4 << RT2860_DLY_PAPE_EN_SHIFT | 4); 6177 if (sc->mac_ver >= 0x5392) { 6178 run_write(sc, RT2860_MAX_LEN_CFG, 0x00002fff); 6179 if (sc->mac_ver == 0x5592) { 6180 run_write(sc, RT2860_HT_FBK_CFG1, 0xedcba980); 6181 run_write(sc, RT2860_TXOP_HLDR_ET, 0x00000082); 6182 } else { 6183 run_write(sc, RT2860_HT_FBK_CFG1, 0xedcb4980); 6184 run_write(sc, RT2860_LG_FBK_CFG0, 0xedcba322); 6185 } 6186 } 6187 } else if (sc->mac_ver == 0x3593) { 6188 run_write(sc, RT2860_TX_SW_CFG0, 6189 4 << RT2860_DLY_PAPE_EN_SHIFT | 2); 6190 } else if (sc->mac_ver >= 0x3070) { 6191 /* set delay of PA_PE assertion to 1us (unit of 0.25us) */ 6192 run_write(sc, RT2860_TX_SW_CFG0, 6193 4 << RT2860_DLY_PAPE_EN_SHIFT); 6194 } 6195 6196 /* wait while MAC is busy */ 6197 for (ntries = 0; ntries < 100; ntries++) { 6198 if (run_read(sc, RT2860_MAC_STATUS_REG, &tmp) != 0) 6199 goto fail; 6200 if (!(tmp & (RT2860_RX_STATUS_BUSY | RT2860_TX_STATUS_BUSY))) 6201 break; 6202 run_delay(sc, 10); 6203 } 6204 if (ntries == 100) 6205 goto fail; 6206 6207 /* clear Host to MCU mailbox */ 6208 run_write(sc, RT2860_H2M_BBPAGENT, 0); 6209 run_write(sc, RT2860_H2M_MAILBOX, 0); 6210 run_delay(sc, 10); 6211 6212 if (run_bbp_init(sc) != 0) { 6213 device_printf(sc->sc_dev, "could not initialize BBP\n"); 6214 goto fail; 6215 } 6216 6217 /* abort TSF synchronization */ 6218 run_disable_tsf(sc); 6219 6220 /* clear RX WCID search table */ 6221 run_set_region_4(sc, RT2860_WCID_ENTRY(0), 0, 512); 6222 /* clear WCID attribute table */ 6223 run_set_region_4(sc, RT2860_WCID_ATTR(0), 0, 8 * 32); 6224 6225 /* hostapd sets a key before init. So, don't clear it. */ 6226 if (sc->cmdq_key_set != RUN_CMDQ_GO) { 6227 /* clear shared key table */ 6228 run_set_region_4(sc, RT2860_SKEY(0, 0), 0, 8 * 32); 6229 /* clear shared key mode */ 6230 run_set_region_4(sc, RT2860_SKEY_MODE_0_7, 0, 4); 6231 } 6232 6233 run_read(sc, RT2860_US_CYC_CNT, &tmp); 6234 tmp = (tmp & ~0xff) | 0x1e; 6235 run_write(sc, RT2860_US_CYC_CNT, tmp); 6236 6237 if (sc->mac_rev != 0x0101) 6238 run_write(sc, RT2860_TXOP_CTRL_CFG, 0x0000583f); 6239 6240 run_write(sc, RT2860_WMM_TXOP0_CFG, 0); 6241 run_write(sc, RT2860_WMM_TXOP1_CFG, 48 << 16 | 96); 6242 6243 /* write vendor-specific BBP values (from EEPROM) */ 6244 if (sc->mac_ver < 0x3593) { 6245 for (i = 0; i < 10; i++) { 6246 if (sc->bbp[i].reg == 0 || sc->bbp[i].reg == 0xff) 6247 continue; 6248 run_bbp_write(sc, sc->bbp[i].reg, sc->bbp[i].val); 6249 } 6250 } 6251 6252 /* select Main antenna for 1T1R devices */ 6253 if (sc->rf_rev == RT3070_RF_3020 || sc->rf_rev == RT5390_RF_5370) 6254 run_set_rx_antenna(sc, 0); 6255 6256 /* send LEDs operating mode to microcontroller */ 6257 (void)run_mcu_cmd(sc, RT2860_MCU_CMD_LED1, sc->led[0]); 6258 (void)run_mcu_cmd(sc, RT2860_MCU_CMD_LED2, sc->led[1]); 6259 (void)run_mcu_cmd(sc, RT2860_MCU_CMD_LED3, sc->led[2]); 6260 6261 if (sc->mac_ver >= 0x5390) 6262 run_rt5390_rf_init(sc); 6263 else if (sc->mac_ver == 0x3593) 6264 run_rt3593_rf_init(sc); 6265 else if (sc->mac_ver >= 0x3070) 6266 run_rt3070_rf_init(sc); 6267 6268 /* disable non-existing Rx chains */ 6269 run_bbp_read(sc, 3, &bbp3); 6270 bbp3 &= ~(1 << 3 | 1 << 4); 6271 if (sc->nrxchains == 2) 6272 bbp3 |= 1 << 3; 6273 else if (sc->nrxchains == 3) 6274 bbp3 |= 1 << 4; 6275 run_bbp_write(sc, 3, bbp3); 6276 6277 /* disable non-existing Tx chains */ 6278 run_bbp_read(sc, 1, &bbp1); 6279 if (sc->ntxchains == 1) 6280 bbp1 &= ~(1 << 3 | 1 << 4); 6281 run_bbp_write(sc, 1, bbp1); 6282 6283 if (sc->mac_ver >= 0x5390) 6284 run_rt5390_rf_setup(sc); 6285 else if (sc->mac_ver == 0x3593) 6286 run_rt3593_rf_setup(sc); 6287 else if (sc->mac_ver >= 0x3070) 6288 run_rt3070_rf_setup(sc); 6289 6290 /* select default channel */ 6291 run_set_chan(sc, ic->ic_curchan); 6292 6293 /* setup initial protection mode */ 6294 run_updateprot_cb(ic); 6295 6296 /* turn radio LED on */ 6297 run_set_leds(sc, RT2860_LED_RADIO); 6298 6299 /* Set up AUTO_RSP_CFG register for auto response */ 6300 run_write(sc, RT2860_AUTO_RSP_CFG, RT2860_AUTO_RSP_EN | 6301 RT2860_BAC_ACKPOLICY_EN | RT2860_CTS_40M_MODE_EN); 6302 6303 sc->sc_flags |= RUN_RUNNING; 6304 sc->cmdq_run = RUN_CMDQ_GO; 6305 6306 for (i = 0; i != RUN_N_XFER; i++) 6307 usbd_xfer_set_stall(sc->sc_xfer[i]); 6308 6309 usbd_transfer_start(sc->sc_xfer[RUN_BULK_RX]); 6310 6311 if (run_txrx_enable(sc) != 0) 6312 goto fail; 6313 6314 return; 6315 6316 fail: 6317 run_stop(sc); 6318 } 6319 6320 static void 6321 run_stop(void *arg) 6322 { 6323 struct run_softc *sc = (struct run_softc *)arg; 6324 uint32_t tmp; 6325 int i; 6326 int ntries; 6327 6328 RUN_LOCK_ASSERT(sc, MA_OWNED); 6329 6330 if (sc->sc_flags & RUN_RUNNING) 6331 run_set_leds(sc, 0); /* turn all LEDs off */ 6332 6333 sc->sc_flags &= ~RUN_RUNNING; 6334 6335 sc->ratectl_run = RUN_RATECTL_OFF; 6336 sc->cmdq_run = sc->cmdq_key_set; 6337 6338 RUN_UNLOCK(sc); 6339 6340 for(i = 0; i < RUN_N_XFER; i++) 6341 usbd_transfer_drain(sc->sc_xfer[i]); 6342 6343 RUN_LOCK(sc); 6344 6345 run_drain_mbufq(sc); 6346 6347 if (sc->rx_m != NULL) { 6348 m_free(sc->rx_m); 6349 sc->rx_m = NULL; 6350 } 6351 6352 /* Disable Tx/Rx DMA. */ 6353 if (run_read(sc, RT2860_WPDMA_GLO_CFG, &tmp) != 0) 6354 return; 6355 tmp &= ~(RT2860_RX_DMA_EN | RT2860_TX_DMA_EN); 6356 run_write(sc, RT2860_WPDMA_GLO_CFG, tmp); 6357 6358 for (ntries = 0; ntries < 100; ntries++) { 6359 if (run_read(sc, RT2860_WPDMA_GLO_CFG, &tmp) != 0) 6360 return; 6361 if ((tmp & (RT2860_TX_DMA_BUSY | RT2860_RX_DMA_BUSY)) == 0) 6362 break; 6363 run_delay(sc, 10); 6364 } 6365 if (ntries == 100) { 6366 device_printf(sc->sc_dev, "timeout waiting for DMA engine\n"); 6367 return; 6368 } 6369 6370 /* disable Tx/Rx */ 6371 run_read(sc, RT2860_MAC_SYS_CTRL, &tmp); 6372 tmp &= ~(RT2860_MAC_RX_EN | RT2860_MAC_TX_EN); 6373 run_write(sc, RT2860_MAC_SYS_CTRL, tmp); 6374 6375 /* wait for pending Tx to complete */ 6376 for (ntries = 0; ntries < 100; ntries++) { 6377 if (run_read(sc, RT2860_TXRXQ_PCNT, &tmp) != 0) { 6378 RUN_DPRINTF(sc, RUN_DEBUG_XMIT | RUN_DEBUG_RESET, 6379 "Cannot read Tx queue count\n"); 6380 break; 6381 } 6382 if ((tmp & RT2860_TX2Q_PCNT_MASK) == 0) { 6383 RUN_DPRINTF(sc, RUN_DEBUG_XMIT | RUN_DEBUG_RESET, 6384 "All Tx cleared\n"); 6385 break; 6386 } 6387 run_delay(sc, 10); 6388 } 6389 if (ntries >= 100) 6390 RUN_DPRINTF(sc, RUN_DEBUG_XMIT | RUN_DEBUG_RESET, 6391 "There are still pending Tx\n"); 6392 run_delay(sc, 10); 6393 run_write(sc, RT2860_USB_DMA_CFG, 0); 6394 6395 run_write(sc, RT2860_MAC_SYS_CTRL, RT2860_BBP_HRST | RT2860_MAC_SRST); 6396 run_write(sc, RT2860_MAC_SYS_CTRL, 0); 6397 6398 for (i = 0; i != RUN_EP_QUEUES; i++) 6399 run_unsetup_tx_list(sc, &sc->sc_epq[i]); 6400 } 6401 6402 static void 6403 run_delay(struct run_softc *sc, u_int ms) 6404 { 6405 usb_pause_mtx(mtx_owned(&sc->sc_mtx) ? 6406 &sc->sc_mtx : NULL, USB_MS_TO_TICKS(ms)); 6407 } 6408 6409 static void 6410 run_update_chw(struct ieee80211com *ic) 6411 { 6412 6413 printf("%s: TODO\n", __func__); 6414 } 6415 6416 static int 6417 run_ampdu_enable(struct ieee80211_node *ni, struct ieee80211_tx_ampdu *tap) 6418 { 6419 6420 /* For now, no A-MPDU TX support in the driver */ 6421 return (0); 6422 } 6423 6424 static device_method_t run_methods[] = { 6425 /* Device interface */ 6426 DEVMETHOD(device_probe, run_match), 6427 DEVMETHOD(device_attach, run_attach), 6428 DEVMETHOD(device_detach, run_detach), 6429 DEVMETHOD_END 6430 }; 6431 6432 static driver_t run_driver = { 6433 .name = "run", 6434 .methods = run_methods, 6435 .size = sizeof(struct run_softc) 6436 }; 6437 6438 DRIVER_MODULE(run, uhub, run_driver, run_driver_loaded, NULL); 6439 MODULE_DEPEND(run, wlan, 1, 1, 1); 6440 MODULE_DEPEND(run, usb, 1, 1, 1); 6441 MODULE_DEPEND(run, firmware, 1, 1, 1); 6442 MODULE_VERSION(run, 1); 6443 USB_PNP_HOST_INFO(run_devs); 6444